Xam Idea Solutions Class 12 Chemistry Chapter 11 Alcohols Phenols And Ethers Short Answer Questions II

Solutions for Class 12 Chemistry: Chapter 11 Alcohols Phenols And Ethers

Explore reliable textbook solutions for Chapter 11 Alcohols Phenols And Ethers tailored for Class 12 learners using methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice Class 12 Chemistry Solutions: Chapter 11 Alcohols Phenols And Ethers

Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Short Answer Questions II

Question 1. Account for the following:

Rectified spirit cannot be converted into absolute alcohol by simple distillation.

Solution.

Rectified spirit containing 95% ethyl alcohol and 5% water forms an azeotropic mixture which distils at a constant temperature of 351.13 K.

Q. Diethyl ether does not react with sodium.

Ans. Since diethyl ether does not contain an active hydrogen attached to oxygen like alcohols and phenols, it does not react with sodium.

Q. Phenols do not undergo substitution of the —OH group like alcohols.

Ans. The C—O bond in phenols has some double bond character due to resonance and hence cannot be easily cleaved by nucleophile. In contrast, the C—O bond in alcohols is a pure single bond and hence can be easily cleaved by nucleophile.

Teacher's Note: Rectified spirit forms an azeotrope with water, so simple distillation cannot separate the components further.

Exam Note: Azeotrope boils at a constant composition.

Question 2. i. Arrange the following sets of compounds in order of their increasing boiling points: (a) Pentan-1-ol, butan-1-ol, butan-2-ol, ethanol, propan-1-ol, methanol (b) Pentan-1-ol, n-butane, pentanal, ethoxyethane. ii. Arrange the following compounds in increasing order of acidity and give a suitable explanation. Phenol, o-nitrophenol, o-cresol [NCERT Exemplar]

Solution.

i.

(a) Methanol < ethanol < propan-1-ol < butan-2-ol < butane-1-ol < pentan-1-ol.

(b) n-Butane < ethoxyethane < pentanal < pentan-1-ol. ii. Increasing order of acidity: o-cresol < phenol < o-nitrophenol In substituted phenols, the presence of electron-withdrawing groups enhance the acidic strength of phenol whereas, electron-releasing groups decrease the acidic strength of phenol.

Teacher's Note: Hydrogen bonding and molecular size govern the boiling-point order within each given set of compounds.

Exam Note: More hydrogen bonding means higher boiling point.

Question 3. Write the main product(s) in each of the following reactions: (i) (CH₃)₃C–O–CH₃ + HI → (ii) CH₃–CH=CH₂ –(i) B₂H₆; (ii) 3H₂O₂/OH⁻→ (iii) C₆H₅–OH –(i) aq. NaOH; (ii) CO₂, H⁺→ [CBSE Delhi 2016]

Solution.

(i) (CH₃)₃C–O–CH₃ (methyl tert-butyl ether) + HI → (CH₃)₃C–I (tert-butyl iodide) + CH₃OH (methyl alcohol)

(ii) CH₃–CH=CH₂ –(i) B₂H₆; (ii) 3H₂O₂/OH⁻→ CH₃–CH₂–CH₂–OH (n-propyl alcohol)

(iii) C₆H₅OH –(i) aq. NaOH; (ii) CO₂/H⁺→ o-HOC₆H₄COOH (salicylic acid)

Teacher's Note: A tertiary alkyl ether cleaves by SN1, giving the tertiary iodide; hydroboration-oxidation is anti-Markovnikov.

Exam Note: tert-Butyl iodide; propan-1-ol; salicylic acid.

Question 4. What happens when (a) (CH₃)₃C–OH is treated with Cu at 573 K, (b) Anisole is treated with CH₃Cl/anhydrous AlCl₃, (c) Phenol is treated with Zn dust? Write chemical equations in support of your answer. [CBSE (F) 2017]

Solution.

(a) tert-Butyl alcohol undergoes dehydration: (CH₃)₃C–OH –(Cu, 573 K)→ (CH₃)₂C=CH₂ (isobutylene) + H₂O

(b) Friedel–Crafts alkylation: C₆H₅OCH₃ + CH₃Cl –(anhyd. AlCl₃)→ 2-methoxytoluene (minor) + 4-methoxytoluene (major)

(c) C₆H₅OH + Zn → C₆H₆ (benzene) + ZnO

Teacher's Note: Tertiary alcohols dehydrate over copper; the –OCH₃ group directs substitution to ortho and para positions.

Exam Note: Isobutylene; 4-methoxytoluene (major); benzene.

Question 5. How would you obtain the following? (a) Benzoquinone from phenol (b) 2-Methylpropan-2-ol from methylmagnesium bromide (c) Propan-2-ol from propene [CBSE (AI) 2011, (F) 2011]

Solution.

(a) Phenol –(Na₂Cr₂O₇/H₂SO₄)→ benzoquinone (oxidation of phenol).

(b) CH₃COCH₃ (propanone) + CH₃MgBr → (CH₃)₂C(CH₃)OMgBr –(H₂O)→ (CH₃)₃C–OH (2-methylpropan-2-ol)

(c) CH₃CH=CH₂ (propene) + H₂O –(H⁺, Markovnikov’s addition)→ CH₃CH(OH)CH₃ (propan-2-ol)

Teacher's Note: Oxidation gives the quinone; Grignard addition to a ketone gives a tertiary alcohol; acid hydration follows Markovnikov’s rule.

Exam Note: Oxidation; Grignard on ketone; acid hydration.

Question 6. How do you convert the following: (a) Phenol to anisole (b) Propan-2-ol to 2-methylpropan-2-ol (c) Aniline to phenol [CBSE Delhi 2015]

Solution.

(a) C₆H₅OH + NaOH → C₆H₅ONa (sodium phenoxide); C₆H₅ONa + CH₃Br → C₆H₅OCH₃ (anisole)

(b) CH₃CH(OH)CH₃ –(PCC)→ CH₃COCH₃; CH₃COCH₃ –(i) CH₃MgBr, (ii) H₂O→ (CH₃)₃C–OH (2-methylpropan-2-ol)

(c) C₆H₅NH₂ –(NaNO₂/HCl, 273–278 K)→ C₆H₅N₂⁺Cl⁻ (benzenediazonium chloride); C₆H₅N₂⁺Cl⁻ –(H₂O, warm)→ C₆H₅OH (phenol)

Teacher's Note: Williamson synthesis for (a); oxidise then add Grignard for (b); diazotisation then hydrolysis for (c).

Exam Note: Williamson; PCC then Grignard; diazotisation then warm water.

Question 7. Explain the mechanism of the following reactions: (a) Addition of Grignard’s reagent to the carbonyl group of a compound forming an adduct followed by hydrolysis. (b) Acid catalysed dehydration of an alcohol forming an alkene. (c) Acid catalysed hydration of an alkene forming an alcohol. [CBSE Delhi 2009; (AI) 2012] [HOTS]

Solution.

(a) Step I: Nucleophilic addition of Grignard reagent to carbonyl group. The carbon of R–Mg–X (δ⁻) attacks the carbonyl carbon (δ⁺) and the C=O π electrons shift to oxygen: >C=O + R–MgX → >C(R)–O⁻Mg⁺X (adduct).

Step II: Hydrolysis. The adduct is hydrolysed by water: >C(R)–OMgX + H₂O → >C(R)–OH (alcohol) + Mg(OH)X

(b) CH₃CH₂OH –(H⁺, Δ)→ CH₂=CH₂ + H₂O. Step I: Formation of protonated alcohol (fast): CH₃CH₂–ÖH + H⁺ ⇌ CH₃CH₂–O⁺H₂ (ethyl oxonium ion). Step II: Formation of carbocation, the slowest step and hence the rate determining step: CH₃CH₂–O⁺H₂ ⇌ CH₃CH₂⁺ + H₂O. Step III: Formation of ethylene by elimination of a proton: CH₃CH₂⁺ ⇌ CH₂=CH₂ + H⁺. To drive the equilibrium to the right, ethylene is removed as it is formed.

(c) >C=C< + H₂O ⇌ (H⁺) –CH–C(OH)–. Step I: Protonation of alkene to form carbocation by electrophilic attack of H₃O⁺ (H₂O + H⁺ → H₃O⁺; >C=C< + H₃O⁺ ⇌ >CH–C⁺< + H₂O). Step II: Nucleophilic attack of water on carbocation: >CH–C⁺< + H₂O ⇌ >CH–C(–O⁺H₂)<. Step III: Deprotonation to form an alcohol: >CH–C(–O⁺H₂)< + H₂O → >CH–C(OH)< + H₃O⁺

Teacher's Note: Dehydration and hydration are reverse processes passing through the same carbocation intermediate.

Exam Note: Carbocation is the key intermediate.

Question 8. Give reasons for the following: (a) Phenol is more acidic than methanol. (b) The C–O–H bond angle in alcohols is slightly less than the tetrahedral angle (109°28′). (c) (CH₃)₃C–O–CH₃ on reaction with HI gives (CH₃)₃C–I and CH₃–OH as the main products and not (CH₃)₃C–OH and CH₃–I. [CBSE Allahabad 2015] [HOTS]

Solution.

(a) In phenol, the phenoxide ion obtained after the removal of a proton is stabilised by resonance whereas there is no resonance in the alkoxide ion of methanol. Moreover, due to +I effect of CH₃ group the electron density in O–H bond increases which makes release of H⁺ difficult.

(b) It is due to the repulsion between the lone pair of electrons on oxygen atoms.

(c) The reaction between (CH₃)₃COCH₃ and HI follows SN1 mechanism. For SN1 reaction, the formation of product is controlled by stability of the carbocation formed in the slowest step. Since tert-butyl carbocation (CH₃)₃C⁺ formed after the cleavage of C–O bond in the slowest step is more stable than methyl carbocation (CH₃⁺) therefore (CH₃)₃C–I and CH₃OH are the main products.

Teacher's Note: Resonance stabilises phenoxide; lone-pair repulsion squeezes the bond angle; stable carbocation decides the ether cleavage.

Exam Note: Phenoxide is resonance stabilised; tertiary carbocation is more stable.

Question 9. Give the major products that are formed by heating each of the following ethers with HI. (i) CH₃CH₂CH(CH₃)CH₂–O–CH₂CH₃ (ii) CH₃CH₂CH₂–O–C(CH₃)₂–CH₂CH₃ (iii) C₆H₅–CH₂–O–C₆H₅ [HOTS]

Solution.

(i) CH₃CH₂CH(CH₃)CH₂OH + CH₃CH₂I

(ii) CH₃CH₂CH₂OH + CH₃CH₂C(CH₃)₂–I

(iii) C₆H₅CH₂I + C₆H₅OH

Teacher's Note: Primary and secondary alkyl ethers cleave by SN2 at the smaller group; tertiary and benzylic ethers cleave by SN1; the aryl–O bond does not break.

Exam Note: Cleavage: SN2 at smaller group; SN1 for tertiary or benzylic.

Question 10. Carry out the following conversions: (a) Phenol to benzoquinone (b) Propanone to 2-Methylpropan-2-ol (c) Propene to propan-2-ol.

Solution.

(a) Phenol –(Na₂Cr₂O₇/H₂SO₄)→ benzoquinone

(b) CH₃COCH₃ + CH₃MgBr → (CH₃)₃C–OMgBr –(H₂O)→ (CH₃)₃C–OH (2-methylpropan-2-ol)

(c) CH₃CH=CH₂ + H₂O –(H⁺, Markovnikov’s addition)→ CH₃CH(OH)CH₃ (propan-2-ol)

Teacher's Note: Oxidation, Grignard addition to a ketone, and Markovnikov hydration respectively.

Exam Note: Na₂Cr₂O₇/H₂SO₄; CH₃MgBr then H₂O; H⁺/H₂O.

Question 11. How will you bring the following conversions? (i) Phenol to benzyl alcohol (ii) Phenol to m-bromophenol (iii) Phenol to aspirin. [HOTS]

Solution.

(i) Phenol –(Zn dust, Δ)→ benzene –(CH₃Cl/AlCl₃)→ toluene –(Cl₂, hν)→ benzyl chloride –(NaOH (aq))→ benzyl alcohol

(ii) Phenol –(Zn dust, Δ)→ benzene –(conc. HNO₃/conc. H₂SO₄)→ nitrobenzene –(Br₂/FeBr₃)→ m-bromonitrobenzene –(Sn/HCl (conc.))→ m-bromoaniline –(NaNO₂/HCl, 273–278 K)→ m-bromobenzenediazonium chloride –(H₂O, Δ)→ m-bromophenol

(iii) Phenol –(NaOH)→ sodium phenoxide –((i) CO₂, 410 K/4–7 atm; (ii) H₂O/H⁺)→ salicylic acid –((CH₃CO)₂O, conc. H₂SO₄)→ aspirin (2-acetoxybenzoic acid)

Teacher's Note: Remove OH with zinc dust to reach benzene, then build up; in (iii) use Kolbe followed by acetylation.

Exam Note: Zinc dust route; Kolbe then acetylation gives aspirin.

Question 12. The following is not an appropriate reaction for the preparation of tert.-butyl ethyl ether: C₂H₅ONa + (CH₃)₃C–Cl → (CH₃)₃C–OC₂H₅. (i) What would be the major product of the given reaction? (ii) Write a suitable reaction for the preparation of tert.-butyl ethyl ether, specifying the names of reagents used. Justify your answer in both cases. [CBSE Sample Paper 2016] [HOTS]

Solution.

(i) The major product of the given reaction is 2-methylprop-1-ene. It is because sodium ethoxide (CH₃CH₂ONa) is a strong nucleophile as well as a strong base. Thus, elimination reaction predominates over substitution reaction. (CH₃)₃C–Cl + CH₃CH₂ONa → (CH₃)₂C=CH₂ (isobutylene) + NaCl + CH₃CH₂OH

(ii) To prepare tertiary butylethyl ether, the alkyl halide should be primary, i.e., ethyl chloride and the nucleophile should be tertiary, i.e., tertiary butoxide ion. It is because the reaction occurs by SN2 mechanism and primary alkyl halides are most reactive in SN2 reactions. (CH₃)₃C–ONa (sodium tert-butoxide) + CH₃CH₂Cl (ethyl chloride) → (CH₃)₃C–OC₂H₅ (tert-butyl ethyl ether) + NaCl

Teacher's Note: A tertiary halide with a strong base eliminates; Williamson synthesis needs a primary halide.

Exam Note: Use primary halide with tertiary alkoxide.

Question 13. Answer the following questions: (a) Why are ethers insoluble in water? (b) Complete the reaction equation: ? → 4-methylheptan-4-ol (c) How will you know whether a given OH group is alcoholic or phenolic in nature?

Solution.

(a) Ethers are insoluble in water because due to the bigger size of the alkyl groups, the oxygen atom in ethers fails to form intermolecular H-bonds with water.

(b) 4-Methylhept-3-ene –(H₂O/H⁺)→ 4-methylheptan-4-ol (Markovnikov addition of water)

(c) Phenolic OH group gives blue or violet colouration with neutral FeCl₃, while alcoholic OH group does not.

Teacher's Note: Neutral ferric chloride is the standard test for phenolic hydroxyl groups.

Exam Note: FeCl₃ test: violet for phenol.

Question 14. Arrange the following compounds in decreasing order of acidity. (i) H₂O, ROH, HC≡CH (ii) CH₃O–C₆H₄–OH (p-methoxyphenol), O₂N–C₆H₄–OH (p-nitrophenol), C₆H₅OH (iii) CH₃OH, H₂O, C₆H₅OH [NCERT Exemplar]

Solution.

(i) H₂O > ROH > HC≡CH

(ii) O₂N–C₆H₄–OH > C₆H₅OH > CH₃O–C₆H₄–OH

(iii) C₆H₅OH > H₂O > CH₃OH

Teacher's Note: Electron-withdrawing groups raise acidity; electron-donating groups lower it.

Exam Note: Nitrophenol is the strongest acid in set (ii).

Question 15. An organic compound ‘A’ having molecular formula C₃H₆ on treatment with aqueous H₂SO₄ gives ‘B’ which on treatment with HCl/ZnCl₂ gives ‘C’. The compound C on treatment with ethanolic KOH gives back the compound ‘A’. Identify the compounds A, B, C. [HOTS]

Solution.

A = CH₃–CH=CH₂ (propene), B = CH₃–CH(OH)–CH₃ (propan-2-ol), C = CH₃–CH(Cl)–CH₃ (2-chloropropane)

CH₃CH=CH₂ (A) –(aq. H₂SO₄, hydration)→ CH₃CH(OH)CH₃ (B) –(HCl/ZnCl₂)→ CH₃CH(Cl)CH₃ (C) –(ethanolic KOH)→ CH₃CH=CH₂ (A)

Teacher's Note: Hydration, then chlorination by Lucas reagent, then dehydrohalogenation returns the alkene.

Exam Note: A propene, B propan-2-ol, C 2-chloropropane.

Question 16. A compound ‘A’ is optically active. On mild oxidation, it gives a compound ‘B’ but on vigorous oxidation gives another compound ‘C’. C along with D is also formed from B by reaction with iodine and alkali. Deduce the structures of A, B, C, D. [HOTS]

Solution.

A = CH₃CH₂CH(OH)CH₃ (sec-butyl alcohol, butan-2-ol)

A –(mild oxidation (O))→ B = CH₃CH₂COCH₃ (ethyl methyl ketone)

A –(vigorous oxidation (O))→ C = CH₃CH₂COOH (propanoic acid)

B –(I₂/NaOH)→ CH₃CH₂COONa (which gives C, propanoic acid, on acidification) + D = CHI₃ (iodoform)

Teacher's Note: Butan-2-ol has a chiral carbon; its ketone has a CH₃CO– group and gives the iodoform test.

Exam Note: A butan-2-ol, B butanone, C propanoic acid, D iodoform.

Question 17. A compound ‘A’ having molecular formula C₄H₁₀O is found to be soluble in concentrated sulphuric acid. It does not react with sodium metal or potassium permanganate. On heating with excess of HI, it gives a single alkyl halide. Deduce the structure of compound A and explain all the reactions. [HOTS]

Solution.

(i) As compound A does not react with sodium metal or potassium permanganate, it cannot be an alcohol.

(ii) As compound A dissolves in conc. H₂SO₄, it may be an ether.

(iii) As compound A on heating with excess of HI gives a single alkyl halide, therefore, compound A must be a symmetrical ether.

(iv) The only symmetrical ether having molecular formula C₄H₁₀O is diethyl ether. Thus compound ‘A’ is diethylether, CH₃–CH₂–O–CH₂–CH₃.

Reactions: CH₃CH₂OCH₂CH₃ –(conc. H₂SO₄)→ [CH₃CH₂–O⁺(H)–CH₂CH₃] HSO₄⁻ (soluble oxonium salt); CH₃CH₂OCH₂CH₃ –(HI, Δ)→ 2CH₃CH₂I (ethyl iodide)

Teacher's Note: Inertness to Na and KMnO₄ rules out an alcohol; one halide means a symmetrical ether.

Exam Note: Compound A is diethyl ether.

Class 12 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 12 Chemistry Chapter 11 Alcohols Phenols And Ethers Short Answer Questions II

Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 12 Chemistry Chapter 11 Alcohols Phenols And Ethers Short Answer Questions II

Review detailed solutions for Class 12 Mathematics. The Xam Idea Solutions Class 12 Chemistry Chapter 11 Alcohols Phenols And Ethers Short Answer Questions II PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Detailed Calculation Guides for Class 12

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Additional Study Materials for 2026

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.