Pradeep's KL Gogia Solutions Physics Chapter 21 Wave Optics Part 1

Pradeep's KL Gogia Solutions for Class 12 Physics: Chapter 21 Wave Optics

Review structured textbook solutions for Class 12 Physics Chapter 21 Wave Optics prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice Class 12 Physics Solutions: Chapter 21 Wave Optics

Access the complete solution PDF for Class 12 Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Wave Optics - Interference of Light (Pages 1-19)

Examples

Question Example 1. If two light waves having same frequency have intensity ratio 4 : 1 and they interfere, the ratio of maximum to minimum intensity in the pattern will be
(a) 9 : 1   (b) 3 : 1   (c) 25 : 9   (d) 16 : 25

Solution. Correct option: (a). Imax/Imin = (√(I1/I2) + 1)2/(√(I1/I2) − 1)2 = (√4 + 1)2/(√4 − 1)2 = (3)2/(1)2 = 9/1.

Teacher's Note: Use amplitude ratio √(I1/I2)=2, giving (2+1)²:(2−1)².

Exam Note: Ratio formula in terms of intensity ratio.

Question Example 2. In Young's double slit experiment using sodium light (λ = 5898 Å), 92 fringes are seen. If given colour (λ = 5461 Å) is used, how many fringes will be seen
(a) 62   (b) 67   (c) 85   (d) 99

Solution. Correct option: (d). Using n1λ1 = n2λ2: 92 × 5898 = n2 × 5461, so n2 = 99.

Teacher's Note: Fringes in the same field of view are inversely proportional to wavelength.

Exam Note: Shorter wavelength gives more fringes.

Question Example 3. Two beams of light having intensities I and 4I interfere to produce a fringe pattern on a screen. The phase difference between the beams is π/2 at point A and π at point B. Then the difference between the resultant intensities at A and B is
(a) 2I   (b) 4I   (c) 5I   (d) 7I

Solution. Correct option: (b). Using I = I1 + I2 + 2√(I1I2) cos φ.
At A: IA = I + 4I + 2√(I × 4I) cos(π/2) = 5I.
At B: IB = I + 4I + 2√(I × 4I) cos π = I.
Hence the difference = IA − IB = 4I.

Teacher's Note: Substitute each phase difference in the general intensity formula; cos(π/2)=0, cos π=−1.

Exam Note: Write both intensities, then subtract.

Question Example 4. If two waves represented by y1 = 4 sin ωt and y2 = 3 sin(ωt + π/3) interfere at a point, the amplitude of the resulting wave will be about [MP PMT 2000]
(a) 7   (b) 6   (c) 5   (d) 3.

Solution. Correct option: (b). Using A = √(a12 + a22 + 2a1a2 cos φ): A = √(42 + 32 + 2×4×3 cos(π/3)) = √37 ≈ 6.

Teacher's Note: Phase difference is the constant π/3 in the second wave; cos(π/3)=1/2.

Exam Note: Quote √37 ≈ 6.08, so choose 6.

Question Example 5. Two waves being produced by two sources S1 and S2. Both sources have zero phase difference and have wavelength λ. The destructive interference of both the waves will occur at point P if (S1P − S2P) has the value [MP PET 1987]
(a) 5λ   (b) (3/4)λ   (c) 2λ   (d) (11/2)λ

Solution. Correct option: (d). For destructive interference, the path difference of the waves meeting at P (i.e. S1P − S2P) must be an odd multiple of λ/2. Hence option (d) is correct.

Teacher's Note: Destructive needs an odd multiple of λ/2: 11λ/2 = 11 × λ/2.

Exam Note: Check each option for odd multiple of λ/2.

Question Example 6. Two interfering waves (having intensities 9I and 4I) path difference between them is 11λ. The resultant intensity at this point will be
(a) I   (b) 9I   (c) 4I   (d) 25I

Solution. Correct option: (d). Path difference Δ = (λ/2π) × φ, so φ = (2π/λ) × 11λ = 22π, i.e. constructive interference is obtained at the same point.
So resultant intensity IR = (√I1 + √I2)2 = (√9I + √4I)2 = 25I.

Teacher's Note: Integral multiple of λ means constructive; add amplitudes (3+2) and square.

Exam Note: Convert path to phase, identify type, then use Imax.

Question Example 7. In interference if Imax/Imin = 144/81 then what will be the ratio of amplitudes of the interfering wave
(a) 144/81   (b) 7/1   (c) 1/7   (d) 12/9

Solution. Correct option: (b). a1/a2 = (√(Imax/Imin) + 1)/(√(Imax/Imin) − 1) = (√(144/81) + 1)/(√(144/81) − 1) = (12/9 + 1)/(12/9 − 1) = (21/9)/(3/9) = 7/1.

Teacher's Note: Take the square root of the intensity ratio first, then (r+1)/(r−1).

Exam Note: Do not leave the answer as the intensity ratio.

Question Example 8. Two interfering waves having intensities x and y meets a point with time difference 3T/2. What will be the resultant intensity at that point
(a) (√x + √y)   (b) (√x + √y + √(xy))   (c) x + y + 2√(xy)   (d) (x + y)/(2xy)

Solution. Corrected: time difference T.D. = (T/2π) × φ, so 3T/2 = (T/2π) × φ and φ = 3π. Since cos 3π = −1, this is destructive interference (an odd multiple of π), not constructive as the book states. Resultant intensity I = x + y + 2√(xy) cos 3π = x + y − 2√(xy) = (√x − √y)2. None of the printed options equals this; the book marks (c), x + y + 2√(xy), which would be correct only for a time difference of T or 2T.

Teacher's Note: Convert time difference to phase; 3π is an odd multiple of π, so cos φ = −1.

Exam Note: Book key (c) is wrong; state the corrected result.

Question Example 9. In Young's double-slit experiment, an interference pattern is obtained on a screen by a light of wavelength 6000 Å, coming from the coherent sources S1 and S2. At certain point P on the screen third dark fringe is formed. Then the path difference S1P − S2P in microns is [EAMCET 2003]
(a) 0.75   (b) 1.5   (c) 3.0   (d) 4.5

Solution. Correct option: (b). For a dark fringe Δ = (2n − 1)λ/2; here n = 3 and λ = 6000 × 10−10 m.
So Δ = (2×3 − 1) × (6 × 10−7)/2 = 15 × 10−7 m = 1.5 microns.

Teacher's Note: Third dark fringe means n=3 in (2n−1)λ/2, i.e. 2.5λ.

Exam Note: Convert metres to microns at the end.

Question Example 10. In a Young's double slit experiment, the slit separation is 1 mm and the screen is 1 m from the slit. For a monochromatic light of wavelength 500 nm, the distance of 3rd minima from the central maxima is
(a) 0.50 mm   (b) 1.25 mm   (c) 1.50 mm   (d) 1.75 mm

Solution. Correct option: (b). Distance of nth minima from the central maxima x = (2n − 1)λD/(2d).
So x = (2×3 − 1) × 500×10−9 × 1/(2 × 10−3) = 1.25 mm.

Teacher's Note: Third minimum lies at 2.5 fringe widths; β = λD/d = 0.5 mm.

Exam Note: Keep units in metres, convert answer to mm.

Question Example 11. The two slits at a distance of 1 mm are illuminated by the light of wavelength 6.5 × 10−7 m. The interference fringes are observed on a screen placed at a distance of 1 m. The distance between third dark fringe and fifth bright fringe will be [NCERT 1982; MP PET 1995; BVP 2003]
(a) 0.65 mm   (b) 1.63 mm   (c) 3.25 mm   (d) 4.88 mm

Solution. Correct option: (b). Distance between nth bright and mth dark fringe (n > m) is x = (n − m + 1/2)β = (n − m + 1/2)λD/d.
So x = (5 − 3 + 1/2) × (6.5×10−7 × 1)/(1×10−3) = 2.5 × 0.65 mm = 1.63 mm.

Teacher's Note: Fifth bright is at 5β; third dark at 2.5β; difference 2.5β.

Exam Note: Identify which fringe lies farther before subtracting.

Question Example 12. The slits in a Young's double slit experiment have equal widths and the source is placed symmetrically relative to the slits. The intensity at the central fringes is I0. If one of the slits is closed, the intensity at this point will be [MP PMT 1999]
(a) I0   (b) I0/4   (c) I0/2   (d) 4I0

Solution. Correct option: (b). Using IR = 4I cos2(φ/2) where I is the intensity of each wave. At the central position φ = 0°, hence initially I0 = 4I.
If one slit is closed, no interference takes place so the intensity at the same location will be I only, i.e. intensity becomes (1/4)th, or I0/4.

Teacher's Note: With both slits open centre intensity is 4I; one slit gives I.

Exam Note: Intensity, not amplitude, falls to one quarter.

Question Example 13. In double slit experiment, the angular width of the fringes is 0.20° for the sodium light (λ = 5890 Å). In order to increase the angular width of the fringes by 10%, the necessary change in the wavelength is
(a) Increase of 589 Å   (b) Decrease of 589 Å   (c) Increase of 6479 Å   (d) Zero

Solution. Correct option: (a). Using θ = λ/d: θ1/θ2 = λ1/λ2, so 0.20/(0.20 + 10% of 0.20) = 5890/λ2, i.e. 0.20/0.22 = 5890/λ2, giving λ2 = 6479 Å.
So increase in wavelength = 6479 − 5890 = 589 Å.

Teacher's Note: Angular width is proportional to λ, so a 10% rise needs a 10% longer wavelength.

Exam Note: Answer is the change, not the new wavelength.

Question Example 14. In Young's experiment, light of wavelength 4000 Å is used and fringes are formed at 2 metre distance and has a fringe width of 0.6 mm. If whole of the experiment is performed in a liquid of refractive index 1.5, then width of fringe will be [MP PMT 1994, 97]
(a) 0.2 mm   (b) 0.3 mm   (c) 0.4 mm   (d) 1.2 mm

Solution. Correct option: (c). βmedium = βair/μ, so βmedium = 0.6/1.5 = 0.4 mm.

Teacher's Note: Wavelength shrinks by μ in the liquid, so fringe width shrinks by μ.

Exam Note: Divide by μ; do not multiply.

Question Example 15. Two identical sources emitted waves which produces intensity of k unit at a point on screen where path difference is λ. What will be intensity at a point on screen at which path difference is λ/4 [RPET 1996]
(a) k/4   (b) k/2   (c) k   (d) Zero

Solution. Correct option: (b). Phase difference φ = (2π/λ)(Δ). For path difference λ, φ1 = 2π; for path difference λ/4, φ2 = π/2.
Using I = 4I0 cos2(φ/2): I1/I2 = cos2(φ1/2)/cos2(φ2/2), so k/I2 = cos2(π)/cos2(π/4) = 1/(1/2), giving I2 = k/2.

Teacher's Note: Take the ratio of cos²(φ/2) at the two points; path λ gives maximum k.

Exam Note: Convert path difference to phase first.

Question Example 16. A thin mica sheet of thickness 2 × 10−6 m and refractive index (μ = 1.5) is introduced in the path of the first wave. The wavelength of the wave used is 5000 Å. The central bright maximum will shift [CPMT 1999]
(a) 2 fringes upward   (b) 2 fringes downward   (c) 10 fringes upward   (d) None of these

Solution. Correct option: (a). Shift Δx = (β/λ)(μ − 1)t = β/(5000×10−10) × (1.5 − 1) × 2×10−6 = 2β.
Since the sheet is placed in the path of the first wave, the shift will be 2 fringes upward.

Teacher's Note: Number of fringes shifted = (μ−1)t/λ = 2; film on upper path shifts pattern up.

Exam Note: Give number and direction of the shift.

Question Example 17. In a YDSE fringes are observed by using light of wavelength 4800 Å, if a glass plate (μ = 1.5) is introduced in the path of one of the wave and another plates is introduced in the path of the (μ = 1.8) other wave. The central fringe takes the position of fifth bright fringe. The thickness of plate will be
(a) 8 micron   (b) 80 micron   (c) 0.8 micron   (d) None of these
(Figure: two plates, labelled 1 and 2, placed one in front of each slit S1 and S2.)

Solution. Correct option: (a). Shift due to the first plate x1 = (β/λ)(μ1 − 1)t (upward) and shift due to the second x2 = (β/λ)(μ2 − 1)t (downward).
Hence net shift = x2 − x1 = (β/λ)(μ2 − μ1)t.
So 5β = (β/λ)(1.8 − 1.5)t, giving t = 5λ/0.3 = 5 × 4800×10−10/0.3 = 8×10−6 m = 8 micron.

Teacher's Note: Plates on both paths shift the pattern oppositely; only the thickness difference (μ2−μ1)t counts.

Exam Note: Equate net shift to 5 fringe widths.

Question Example 18. In young double slit experiment d/D = 10−4 (d = distance between slits, D = distance of screen from the slits). At a point P on the screen resulting intensity is equal to the intensity due to individual slit I0. Then the distance of point P from the central maxima is (λ = 6000 Å)
(a) 2 mm   (b) 1 mm   (c) 0.5 mm   (d) 4 mm

Solution. Correct option: (a). Using I = 4I0 cos2(φ/2) = I0 gives cos(φ/2) = 1/2, so φ/2 = π/3 and φ = 2π/3.
Also path difference Δ = xd/D = (λ/2π) × φ, so x × (d/D) = (6000×10−10/2π) × (2π/3), giving x = 2×10−3 m = 2 mm.

Teacher's Note: Set 4cos²(φ/2)=1 to get φ=2π/3, then convert to path difference λ/3.

Exam Note: Use Δ = xd/D, not the fringe-width formula.

Question Example 19. Two identical radiators have a separation of d = λ/4, where λ is the wavelength of the waves emitted by either source. The initial phase difference between the sources is π/4. Then the intensity on the screen at a distance point situated at an angle θ = 30° from the radiators is (here I0 is the intensity at that point due to one radiator)
(a) I0   (b) 2I0   (c) 3I0   (d) 4I0

Solution. Corrected: initial phase difference φ0 = π/4; phase difference due to path difference φ' = (2π/λ)(Δ), where Δ = d sin θ, so φ' = (2π/λ)(λ/4)(sin 30°) = π/4.
Hence total phase difference φ = φ0 + φ' = π/2. Using I = 4I0 cos2(φ/2) = 4I0 cos2(π/4) = 2I0.
The book works to 2I0 but marks option (a); the correct option is (b) 2I0.

Teacher's Note: Add the initial phase π/4 to the path-difference phase π/4 before using 4I0cos²(φ/2).

Exam Note: Book key (a) wrong; answer is 2I0.

Question Example 20. In YDSE a source of wavelength 6000 Å is used. The screen is placed 1 m from the slits. Fringes formed on the screen, are observed by a student sitting close to the slits. The student's eye can distinguish two neighbouring fringes. If they subtend an angle more than 1 minute of arc. What will be the maximum distance between the slits so that the fringes are clearly visible
(a) 2.06 mm   (b) 2.06 cm   (c) 2.06 × 10−3 mm   (d) None of these

Solution. Correct option: (a). The angular fringe width θ = λ/d ≥ π/(180×60) rad (1' = π/(180×60) rad).
i.e. d < 6×10−7 × 180 × 60/π, i.e. d < 2.06×10−3 m, so dmax = 2.06 mm.

Teacher's Note: Eye resolves fringes only if angular fringe width λ/d is at least 1 arc-minute.

Exam Note: Convert 1 minute to radians first.

Question Example 21. The maximum intensity in case of interference of n identical waves, each of intensity I0, if the interference is (i) coherent and (ii) incoherent respectively are
(a) n2I0, nI0   (b) nI0, n2I0   (c) nI0, I0   (d) n2I0, (n − 1)I0

Solution. Correct option: (a). For two waves I = I1 + I2 + 2√(I1I2) cos φ.
(i) Coherent: φ does not vary with time and I is maximum when cos φ = 1, i.e. (Imax)co = (√I1 + √I2)2. For n identical waves, (Imax)co = (√I0 + √I0 + …)2 = (n√I0)2 = n2I0.
(ii) Incoherent: φ varies randomly with time, so (cos φ)av = 0 and (IR)inco = I1 + I2. For n identical waves, (IR)inco = I0 + I0 + … = nI0.

Teacher's Note: Coherent waves add amplitudes (n²I0); incoherent waves add intensities (nI0).

Exam Note: Contrast amplitude addition with intensity addition.

Question Example 22. The width of one of the two slits in a Young's double slit experiment is double of the other slit. Assuming that the amplitude of the light coming from a slit is proportional to the slit width. The ratio of the maximum to the minimum intensity in interference pattern will be
(a) 1/a   (b) 9/1   (c) 2/1   (d) 1/2

Solution. Correct option: (b). Amax = 2A + A = 3A and Amin = 2A − A = A. Also Imax/Imin = (Amax/Amin)2 = (3A/A)2 = 9/1.

Teacher's Note: Amplitude is proportional to width, so amplitudes are 2A and A; intensity goes as amplitude squared.

Exam Note: Square the amplitude ratio (3:1), not the width ratio.

Question Example 23. A star is moving towards the earth with a speed of 4.5 × 106 m/s. If the true wavelength of a certain line in the spectrum received from the star is 5890 Å, its apparent wavelength will be about [c = 3 × 108 m/s] [MP PMT 1999]
(a) 5890 Å   (b) 5978 Å   (c) 5802 Å   (d) 5896 Å

Solution. Correct option: (c). Using λ' = λ(1 − v/c): λ' = 5890 (1 − 4.5×106/(3×108)) = 5890 × 0.985 ≈ 5802 Å.

Teacher's Note: Source approaching: apparent wavelength shortens by factor (1 − v/c), a blue shift.

Exam Note: Approach means decrease in wavelength.

Question Example 24. Light coming from a star is observed to have a wavelength of 3737 Å, while its real wavelength is 3700 Å. The speed of the star relative to the earth is [Speed of light = 3 × 108 m/s] [MP PET 1997]
(a) 3 × 105 m/s   (b) 3 × 106 m/s   (c) 3.7 × 107 m/s   (d) 3.7 × 106 m/s

Solution. Correct option: (b). Using Δλ = λ v/c: (3737 − 3700) = 3700 × v/(3×108), so v = 3×106 m/s.

Teacher's Note: Doppler shift Δλ/λ = v/c; here 37/3700 = 0.01.

Exam Note: Subtract wavelengths first, then use v = cΔλ/λ.

Question Example 25. Light from the constellation Virgo is observed to increase in wavelength by 0.4%. With respect to Earth the constellation is [MP PMT 1994, 97; MP PET 2003]
(a) Moving away with velocity 1.2×106 m/s   (b) Coming closer with velocity 1.2×106 m/s   (c) Moving away with velocity 4×106 m/s   (d) Coming closer with velocity 4×106 m/s

Solution. Correct option: (a). Using Δλ/λ = v/c, where Δλ/λ = 0.4/100 and c = 3×108 m/s: 0.4/100 = v/(3×108), so v = 1.2×106 m/s.
Since wavelength is increasing, i.e. it is moving away.

Teacher's Note: Increase in wavelength is a red shift: source receding; speed = 0.004c.

Exam Note: State both speed and direction.

Tricky Examples

Question Tricky Example 1. In YDSE, distance between the slits is 2 × 10−3 m, slits are illuminated by a light of wavelength 2000 Å − 9000 Å. In the field of view at a distance of 10−3 m from the central position which wavelength will be observe. Given distance between slits and screen is 2.5 m
(a) 40000 Å   (b) 4500 Å   (c) 5000 Å   (d) 5500 Å

Solution. Corrected: the bright fringe position is x = nλD/d, so λ = xd/(nD) = (10−3 × 2×10−3)/(n × 2.5) = 8×10−7/n m = 8000/n Å. For n = 1, 2, 3, … λ = 8000 Å, 4000 Å, 8000/3 Å (about 2667 Å), 2000 Å (n = 4), within the 2000-9000 Å band.
The book writes "Solution: (b)" but concludes "Hence only option (a) is correct"; the working supports (a) if it is read as 4000 Å (the option is printed as 40000 Å, apparently a misprint). 4500 Å, 5000 Å and 5500 Å are not of the form 8000/n.

Teacher's Note: Bright fringe at fixed x for several n gives λ = 8000/n Å; keep those inside 2000-9000 Å.

Exam Note: Book key is inconsistent; answer 4000 Å.

Question Tricky Example 2. I is the intensity due to a source of light at any point P on the screen. If light reaches the point P via two different paths (a) direct (b) after reflection from a plane mirror then path difference between two paths is 3λ/2, the intensity at P is
(a) I   (b) Zero   (c) 2I   (d) 4I

Solution. Correct option: (d). Reflection of light from a plane mirror gives an additional path difference of λ/2 between the two waves.
∴ Total path difference = 3λ/2 + λ/2 = 2λ, which satisfies the condition of maxima. Resultant intensity = (√I + √I)2 = 4I.

Teacher's Note: Reflection from a mirror adds a λ/2 (π phase) shift to the effective path.

Exam Note: Add the λ/2 shift before judging max or min.

Question Tricky Example 3. A ray of light of intensity I is incident on a parallel glass-slab at a point A as shown in figure. It undergoes partial reflection and refraction. At each reflection 25% of incident energy is reflected. The rays AB and A'B' undergo interference. The ratio Imax/Imin is
(a) 4 : 1   (b) 8 : 1   (c) 7 : 1   (d) 49 : 1
(Figure: ray I strikes the top surface of a glass slab at A; part is reflected along AB, the rest goes down to the bottom surface at C, partly reflects up to A' and emerges as A'B'. Intensities marked: I/4 and 3I/4 at A; 3I/16 reflected at C; 9I/64 emerging along A'B'.)

Solution. Correct option: (d). From the figure I1 = I/4 and I2 = 9I/64, so I2/I1 = 9/16.
Using Imax/Imin = (√(I2/I1) + 1)2/(√(I2/I1) − 1)2 = (√(9/16) + 1)2/(√(9/16) − 1)2 = (7/4)2/(1/4)2 = 49/1.

Teacher's Note: Track energy: 25% reflects at A; 75% enters, 25% reflects at C, 75% exits at A'.

Exam Note: Find both intensities, then use the max/min ratio formula.

Step-by-Step Pradeep's KL Gogia Solutions for Class 12 Math

Chapter-wise Pradeep's KL Gogia Solutions: Pradeep's KL Gogia Solutions Physics Chapter 21 Wave Optics Part 1

Review detailed solutions for Class 12 Mathematics. The Pradeep's KL Gogia Solutions Physics Chapter 21 Wave Optics Part 1 PDF provides comprehensive answers mapped to standard Pradeep's KL Gogia Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for Class 12 Math

In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 12 Physics?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.