Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter Solved Practice Papers Part 1

Step-by-Step Pradeep's KL Gogia Solutions for Class 12 Chemistry Solved Practice Papers

Review structured textbook solutions for Class 12 Chemistry Solved Practice Papers prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Download Solved Practice Papers Textbook Solutions PDF

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

1. Chemical Reactions and Equations

Solved Practice Papers - Solved Sample Papers 1 and 2 (Chemistry XII Theory)

Solved Sample Paper-1 (Marking Scheme 1)

Question 1. Write the IUPAC name of the given compound: benzene ring with NH2 at carbon 1 and Br at carbons 2, 4 and 6 (2,4,6-tribromo substituted aniline).

Solution. 2,4,6-Tribromoaniline (2,4,6-tribromobenzenamine).

Teacher's Note: Number from the carbon bearing NH2 as C-1; Br then sits at 2, 4, 6.

Exam Note: Parent name aniline with lowest locants earns the full mark.

Question 2. Write the main reason for the stability of colloidal sols.

Solution. Like charges on the colloidal particles cause mutual repulsion, so they do not coalesce (also Brownian motion and solvation of particles).

Teacher's Note: Same-sign charge from adsorbed ions keeps particles apart; this is why added electrolytes coagulate sols.

Exam Note: Write 'repulsion between like charges' first.

Question 3. Out of CH3–CH(CH3)–CH2–Cl and CH3–CH2–CH(Cl)–CH3, which is more reactive towards SN1 reaction and why?

Solution. CH3CH2CH(Cl)CH3 (2-chlorobutane). It is a secondary halide and gives the more stable 2° carbocation, whereas the other (primary halide) would give an unstable 1° carbocation.

Teacher's Note: SN1 rate depends on carbocation stability: 3° > 2° > 1°.

Exam Note: Name the halide, state 2° carbocation: ½ + ½.

Question 4. On adding NaOH to ammonium sulphate, a colourless gas with pungent odour is evolved which forms a blue coloured complex with Cu2+ ion. Identify the gas.

Solution. The gas is NH3. (NH4)2SO4 + 2NaOH → Na2SO4 + 2NH3 + 2H2O; NH3 gives the deep blue [Cu(NH3)4]2+ with Cu2+.

Teacher's Note: Pungent smell plus deep-blue complex with Cu2+ identifies ammonia.

Exam Note: One-word answer NH3 carries 1 mark.

Question 5. What type of magnetism is shown by a substance if magnetic moments of domains are arranged in the same direction?

Solution. Ferromagnetism.

Teacher's Note: Parallel alignment: ferro; antiparallel and equal: antiferro; antiparallel unequal: ferri.

Exam Note: Do not confuse with ferrimagnetism.

Question 6. For a reaction: 2NH3(g) → N2(g) + 3H2(g) (on Pd), Rate = k. (i) Write the order and molecularity of this reaction. (ii) Write the unit of k.

Solution. (i) Zero order; molecularity bimolecular (as written, two NH3 molecules; the book also accepts unimolecular). (ii) Unit of k = mol L−1 s−1.

Teacher's Note: Rate = k means rate independent of concentration, so zero order; k has units of rate.

Exam Note: Order comes from the rate law, not the equation.

Question 7. Write the mechanism of the following reaction: 2CH3CH2OH (conc. H2SO4, 413 K) → CH3CH2–O–CH2CH3

Solution. Step 1 (protonation): CH3CH2–O˙˙–H + H+ → CH3CH2–O+H2 (protonated ethanol).
Step 2 (nucleophilic attack, SN2): a second ethanol molecule attacks the α-carbon of the protonated ethanol with its oxygen lone pair, and H2O leaves: CH3CH2–O(H)–H + CH3CH2–O+H2 → CH3CH2–O+(H)–CH2CH3 + H2O.
Step 3 (deprotonation): CH3CH2–O+(H)–CH2CH3 → CH3CH2–O–CH2CH3 + H+.

Teacher's Note: At 413 K with excess alcohol the ether forms; above 443 K ethene forms instead.

Exam Note: Show protonation, attack and deprotonation as separate steps.

Question 8. From the given cells: lead storage cell, mercury cell, fuel cell and dry cell, answer: (i) Which cell is used in hearing aids? (ii) Which cell was used in the Apollo Space Programme? (iii) Which cell is used in automobiles and inverters? (iv) Which cell does not have long life?

Solution. (i) Mercury cell. (ii) Fuel cell. (iii) Lead storage battery. (iv) Dry cell.

Teacher's Note: Mercury cell: constant potential, small size; H2-O2 fuel cell powered Apollo.

Exam Note: Each correct cell earns ½ mark.

Question 9. When chromite ore FeCr2O4 is fused with NaOH in presence of air, a yellow coloured compound (A) is obtained which on acidification with dilute sulphuric acid gives a compound (B). Compound (B) on reaction with KCl forms an orange coloured crystalline compound (C). (i) Write the formulae of the compounds (A), (B) and (C). (ii) Write one use of compound (C).
OR Complete the following chemical equations: (i) 8MnO4− + 3S2O32− + H2O → (ii) Cr2O72− + 3Sn2+ + 14H+ →

Solution. (i) A: Na2CrO4; B: Na2Cr2O7; C: K2Cr2O7. (ii) K2Cr2O7 is a strong oxidising agent / a primary standard in volumetric analysis.
OR: (i) 8MnO4− + 3S2O32− + H2O → 8MnO2 + 6SO42− + 2OH− (ii) Cr2O72− + 14H+ + 3Sn2+ → 2Cr3+ + 3Sn4+ + 7H2O

Teacher's Note: Yellow chromate turns orange dichromate on acidification (CrO42− → Cr2O72−); KCl swaps Na+ for K+.

Exam Note: Check both charge and atom balance in the OR equations.

Question 10. When a co-ordination compound CrCl3·6H2O is mixed with AgNO3, 2 moles of AgCl are precipitated per mole of the compound. Write: (i) Structural formula of the complex. (ii) IUPAC name of the complex.

Solution. 2 mol AgCl means two Cl− are ionisable (outside the sphere). (i) [Cr(H2O)5Cl]Cl2·H2O. (ii) Pentaaquachloridochromium(III) chloride monohydrate (or chloride hydrate).

Teacher's Note: Moles of AgCl equal ionisable chloride; the remaining Cl and 5 H2O sit inside, one H2O outside.

Exam Note: Count of coordination number 6 inside brackets must match.

Question 11. (i) Differentiate between adsorption and absorption. (ii) Out of MgCl2 and AlCl3, which one is more effective in causing coagulation of negatively charged sol and why? (iii) Out of sulphur sol and proteins, which one forms multimolecular colloids?

Solution. (i) Adsorption is a surface phenomenon: molecular species accumulate at the surface of a solid or liquid rather than in the bulk. Absorption is a bulk phenomenon: the substance is uniformly distributed throughout the bulk of the solid. (Any one difference.) (ii) AlCl3, because Al3+ has the higher positive charge (Hardy-Schulze rule). (iii) Sulphur sol.

Teacher's Note: Hardy-Schulze: coagulating power of the oppositely charged ion rises with its charge. Proteins are macromolecular colloids.

Exam Note: State the rule by name in (ii).

Question 12. (i) Name the method of refining of metals such as Germanium. (ii) In the extraction of Al, impure Al2O3 is dissolved in conc. NaOH to form sodium aluminate and leaving impurities behind. What is the name of this process? (iii) What is the role of coke in the extraction of iron from its oxides?

Solution. (i) Zone refining. (ii) Leaching (Bayer's process). (iii) Coke acts as a reducing agent: it forms CO, which reduces the oxide.

Teacher's Note: Zone refining suits semiconductors (Ge, Si, Ga) needing ultra-high purity.

Exam Note: Name the process exactly: 'leaching' or 'Bayer's process'.

Question 13. Calculate e.m.f. of the following cell at 298 K: 2Cr(s) + 3Fe2+(0.1 M) → 2Cr3+(0.01 M) + 3Fe(s). Given: E°(Cr3+|Cr) = −0.74 V, E°(Fe2+|Fe) = −0.44 V.

Solution. E°cell = E°c − E°a = (−0.44) − (−0.74) = 0.30 V.
Ecell = E°cell − (0.059/n) log {[Cr3+]2/[Fe2+]3}, with n = 6
= 0.30 − (0.059/6) log {(0.01)2/(0.1)3} = 0.30 − (0.059/6)(−1) = 0.3098 V.

Teacher's Note: Cr is anode (lower E°); n = 6 electrons from 2 × 3. Q = 10−1, log Q = −1.

Exam Note: Write Nernst equation with n = 6, then substitute.

Question 14. Give reasons: (i) C–Cl bond length in chlorobenzene is shorter than C–Cl bond length in CH3–Cl. (ii) The dipole moment of chlorobenzene is lower than that of cyclohexyl chloride. (iii) SN1 reactions are accompanied by racemization in optically active alkyl halides.

Solution. (i) In chlorobenzene each carbon is sp2 hybridised and the C–Cl bond has partial double bond character due to resonance, so it is shorter. (ii) Due to +R effect in chlorobenzene and the difference in hybridisation (sp2 vs sp3), the −I and +R effects oppose each other, whereas in cyclohexyl chloride only the −I effect operates. (iii) The carbocation formed is planar (sp2 carbon), so the nucleophile attacks from either face with equal probability, giving a racemic mixture.

Teacher's Note: Resonance and sp2 carbon explain (i) and (ii); planar carbocation explains racemization.

Exam Note: One crisp reason per part earns 1 mark each.

Question 15. An element crystallizes in a fcc lattice with cell edge of 250 pm. Calculate the density if 300 g of this element contain 2 × 1024 atoms.

Solution. 2 × 1024 atoms weigh 300 g, so 6.022 × 1023 atoms weigh (300 × 6.022 × 1023)/(2 × 1024) = 90.3 g, i.e. M = 90.3 g mol−1.
d = zM/(a3NA) = (4 × 90.3)/((250 × 10−10 cm)3 × 6.022 × 1023) = 38.4 g cm−3.

Teacher's Note: fcc has z = 4; first get molar mass from atoms per 300 g, then use the density formula.

Exam Note: Convert pm to cm (10−10) to avoid unit loss.

Question 16. The rate constant for the first order decomposition of H2O2 is given by log k = 14.2 − (1.0 × 104/T) K. Calculate Ea for this reaction and rate constant k if its half-life period be 200 minutes. (R = 8.314 J K−1 mol−1)

Solution. Arrhenius: log k = log A − Ea/(2.303RT), so Ea/(2.303R) = 1.0 × 104 K.
Ea = 1.0 × 104 × 2.303 × 8.314 = 191471.4 J mol−1 (≈ 191.5 kJ mol−1).
k = 0.693/t1/2 = 0.693/200 = 0.0034 min−1 (more precisely 0.00347 min−1).

Teacher's Note: Compare with log k = log A − Ea/(2.303RT): the slope term gives Ea; k comes from t1/2.

Exam Note: Slope identification and units of k (min−1) score.

Question 17. (i) What is the role of t-butyl peroxide in the polymerization of ethene? (ii) Identify the monomers in the polymer [–NH–(CH2)6–NH–CO–(CH2)4–CO–]n. (iii) Arrange the following polymers in the increasing order of their intermolecular forces: Polystyrene, Terylene, Buna-S.
OR Write the mechanism of free radical polymerization of ethene.

Solution. (i) It acts as a catalyst/initiator of the free radical chain. (ii) Hexamethylenediamine [H2N(CH2)6NH2, hexane-1,6-diamine] and adipic acid [HOOC(CH2)4COOH, hexanedioic acid] (nylon-6,6). (iii) Buna-S < Polystyrene < Terylene.
OR: Chain initiation: benzoyl peroxide C6H5CO–O–O–COC6H5 → 2C6H5COO• → 2C6H5• (phenyl radical). C6H5• + CH2=CH2 → C6H5–CH2–CH2•. Chain propagation: C6H5–CH2–CH2• + CH2=CH2 → C6H5–(CH2–CH2)2• and so on. Chain termination: two growing chain radicals combine, e.g. C6H5(CH2CH2)nCH2CH2• + •CH2CH2(CH2CH2)nC6H5 → C6H5(CH2CH2)nCH2CH2–CH2CH2(CH2CH2)nC6H5 (polythene).

Teacher's Note: Elastomer < thermoplastic < fibre in intermolecular forces; polyamide monomers come from the amide link.

Exam Note: Show initiation, propagation and termination separately in the OR part.

Question 18. (i) Write the name of two monosaccharides obtained on hydrolysis of lactose sugar. (ii) Why Vitamin C cannot be stored in our body? (iii) What is the difference between a nucleoside and nucleotide?

Solution. (i) β-D-glucose and β-D-galactose. (ii) Vitamin C is water soluble and is excreted out in urine, so it cannot be stored. (iii) Nucleoside = base + sugar; nucleotide = base + sugar + phosphate group (phosphoric acid attached to the nucleoside).

Teacher's Note: Water-soluble vitamins (B, C) need daily intake; fat-soluble ones (A, D, E, K) are stored.

Exam Note: Write the formulas: nucleoside = base + sugar; nucleotide adds phosphate.

Question 19. (i) For the complex [Fe(CN)6]3−, write the hybridisation type, magnetic character and spin nature of the complex. (At. number: Fe = 26) (ii) Draw one of the geometrical isomers of the complex [Pt(en)2Cl2]2+ which is optically active.

Solution. (i) d2sp3 hybridisation; paramagnetic (one unpaired electron, Fe3+ is d5); low spin (inner orbital complex, CN− is a strong field ligand). (ii) The cis isomer is optically active: Pt at the centre with two bidentate en ligands (each shown as a curved N–N arc) and the two Cl atoms placed adjacent (cis) to each other, i.e. cis-[Pt(en)2Cl2]2+.

Teacher's Note: CN− pairs the d electrons, leaving 1 unpaired electron; only the cis form lacks a plane of symmetry.

Exam Note: Draw cis form with two Cl at 90°; trans is optically inactive.

Question 20. Give reasons: (i) Mn shows the highest oxidation state of +7 with oxygen but with fluoride it shows the highest oxidation state of +4. (ii) Transition metals show variable oxidation states. (iii) Actinoids show irregularities in their electronic configurations.

Solution. (i) Oxygen can form multiple bonds (pπ–dπ) with Mn, stabilising +7, whereas fluorine cannot. (ii) Due to partially filled d-orbitals and the comparable energies of ns and (n−1)d orbitals. (iii) Due to the relative stabilities of the 5f0, 5f7 and 5f14 occupancies / comparable energies of 7s, 6d and 5f orbitals.

Teacher's Note: Multiple-bond formation by O explains MnO4− but only MnF4.

Exam Note: One-line reason per part; mention the key orbital energy fact.

Question 21. Write the main product(s) in each of the following reactions: (i) CH3–C(CH3)2–O–CH3 + HI → (ii) CH3–CH=CH2 (i) B2H6, (ii) 3H2O2/OH− → (iii) C6H5–OH (i) aq. NaOH, (ii) CO2, H+ →

Solution. (i) CH3OH and (CH3)3C–I Corrected: the book prints (CH3)3Cl, but the product is tert-butyl iodide, (CH3)3C–I, as I− attacks via SN1 at the tertiary carbon). (ii) CH3CH2CH2OH (propan-1-ol, anti-Markovnikov hydration). (iii) Salicylic acid (2-hydroxybenzoic acid), by Kolbe's reaction.

Teacher's Note: Ether with a tertiary alkyl group cleaves by SN1, giving the tertiary halide.

Exam Note: Hydroboration-oxidation gives anti-Markovnikov alcohol: name it.

Question 22. Write the structures of A, B and C in the following: (i) C6H5–CONH2 (Br2/aq. KOH) → A (NaNO2 + HCl, 0–5°C) → B (KI) → C. (ii) CH3–Cl (KCN) → A (LiAlH4) → B (CHCl3 + alc. KOH, Δ) → C.

Solution. (i) A = C6H5NH2 (Hofmann bromamide); B = C6H5N2+Cl−; C = C6H5I. (ii) A = CH3CN; B = CH3CH2NH2; C = CH3CH2NC (carbylamine reaction).

Teacher's Note: Hofmann degradation loses one carbon; nitrile reduction gives a primary amine that gives the carbylamine test.

Exam Note: Each correct structure earns ½ mark; give full formulas.

Question 23. Due to hectic and busy schedule, Mr. Angad made his life full of tensions and anxiety. He started taking sleeping pills to overcome the depression without consulting the doctor. Mr. Deepak, a close friend of Mr. Angad, advised him to stop taking sleeping pills and suggested to change his lifestyle by doing Yoga, meditation and some physical exercise. Mr. Angad followed his friend's advice and after few days he started feeling better. Answer: (i) What are the values (at least two) displayed by Mr. Deepak? (ii) Why is it not advisable to take sleeping pills without consulting doctor? (iii) What are tranquilizers? Give two examples.

Solution. (i) Aware, concerned (or any other two correct values). (ii) Side effects and unknown health problems. (iii) Tranquilizers are neurologically active drugs / stress relievers; examples: valium, equanil (or any other two).

Teacher's Note: Sleeping pills are barbiturate or benzodiazepine-type tranquilizers and can cause dependence.

Exam Note: Give two values and two named drugs: ½ each.

Question 24. (a) Calculate the freezing point of solution when 1.9 g of MgCl2 (M = 95 g mol−1) was dissolved in 50 g of water, assuming MgCl2 undergoes complete ionization. (Kf for water = 1.86 K kg mol−1) (b) (i) Out of 1 M glucose and 2 M glucose, which one has a higher boiling point and why? (ii) What happens when the external pressure applied becomes more than the osmotic pressure of solution?
OR (a) When 2.56 g of sulphur was dissolved in 100 g of CS2, the freezing point lowered by 0.383 K. Calculate the formula of sulphur (Sx). (Kf for CS2 = 3.83 K kg mol−1, atomic mass of S = 32 g mol−1) (b) Blood cells are isotonic with 0.9% sodium chloride solution. What happens if we place blood cells in a solution containing: (i) 1.2% NaCl solution? (ii) 0.4% NaCl solution?

Solution. (a) MgCl2 ionises completely, i = 3. ΔTf = i Kf Wb × 1000/(Mb Wa) = 3 × 1.86 × 1.9 × 1000/(95 × 50) = 2.23 K. Tf = 273.15 − 2.23 = 270.92 K (the book also shows 270.77 K using 273 K). (b)(i) 2 M glucose has the higher boiling point: more solute particles, lower vapour pressure. (ii) Reverse osmosis occurs (solvent flows from solution to pure solvent).
OR: (a) ΔTf = Kf Wb × 1000/(Mb Wa): 0.383 = 3.83 × 2.56 × 1000/(M × 100), so M = 256 g mol−1; 32x = 256, x = 8, i.e. S8. (b)(i) Cells shrink (1.2% is hypertonic, water leaves the cells). (ii) Cells swell (0.4% is hypotonic, water enters the cells).

Teacher's Note: Check: 3 × 1.86 × 1.9/(95 × 0.05) = 2.23 K. Hypertonic outside shrinks cells; hypotonic swells them.

Exam Note: Use i = 3 for MgCl2; M = 256 gives S8.

Question 25. (a) Account for the following: (i) Ozone is thermodynamically unstable. (ii) Solid PCl5 is ionic in nature. (iii) Fluorine forms only one oxoacid HOF. (b) Draw the structure of: (i) BrF5 (ii) XeF4.
OR (i) Compare the oxidizing action of F2 and Cl2 by considering parameters such as bond dissociation enthalpy, electron gain enthalpy and hydration enthalpy. (ii) Write the conditions to maximize the yield of H2SO4 by contact process. (iii) Arrange the following in the increasing order of property mentioned: (a) H3PO3, H3PO4, H3PO2 (reducing character) (b) NH3, PH3, AsH3, SbH3, BiH3 (base strength)

Solution. (a)(i) Ozone is an endothermic compound; its decomposition (2O3 → 3O2) is exothermic with negative ΔG, i.e. spontaneous. (ii) Solid PCl5 exists as [PCl4]+[PCl6]−. (iii) Fluorine shows only the −1 oxidation state, being the most electronegative element and having no d-orbitals. (b)(i) BrF5: square pyramidal (Br at the centre of a square base of four F, the fifth F at the apex, with one lone pair on Br opposite the apex; sp3d2). (ii) XeF4: square planar (Xe at the centre with four F at the corners and two lone pairs above and below the plane; sp3d2).
OR: (i) F2 is the stronger oxidising agent than Cl2 because of (a) low enthalpy of dissociation of the F–F bond, (b) less negative electron gain enthalpy of F (than Cl), and (c) high hydration enthalpy of the F− ion. (ii) Low temperature, high pressure and presence of a catalyst (V2O5) for 2SO2 + O2 ⇄ 2SO3. (iii) (a) H3PO4 < H3PO3 < H3PO2 (b) BiH3 < SbH3 < AsH3 < PH3 < NH3

Teacher's Note: Reducing power rises as P–H bonds increase (+5, +3, +1 oxidation states); basicity falls down the group.

Exam Note: Draw lone pairs on Br and Xe.

Question 26. (a) Write the structures of A, B, C, D and E in the following reactions: C6H6 (CH3COCl, anhyd. AlCl3) → A (Zn–Hg/conc. HCl) → B (i) KMnO4/KOH, (ii) H3O+ → C; and A (NaOI) → D + E.
OR (a) Write the chemical equation for the reaction involved in Cannizzaro reaction. (b) Draw the structure of the semicarbazone of ethanal. (c) Why pKa of F–CH2–COOH is lower than that of Cl–CH2–COOH? (d) Write the product in the following reaction: CH3–CH=CH–CH2CN (i) DIBAL-H, (ii) H2O → (e) How can you distinguish between propanal and propanone?

Solution. A: C6H5COCH3 (acetophenone); B: C6H5CH2CH3 (ethylbenzene, Clemmensen reduction); C: C6H5COOH (benzoic acid); D, E: C6H5COONa and CHI3 (iodoform test).
OR: (a) HCHO + HCHO (conc. NaOH) → HCOONa + CH3OH (or any other example). (b) CH3CH=N–NHCONH2. (c) Fluorine has the stronger −I effect (greater electron-withdrawing power), so F–CH2COOH is the stronger acid with lower pKa. (d) CH3CH=CHCH2CHO. (e) Propanal gives a silver mirror with ammoniacal silver nitrate (Tollens' reagent); propanone does not (or any other correct test).

Teacher's Note: Acetophenone has the CH3CO group so gives iodoform; DIBAL-H partially reduces nitriles to aldehydes.

Exam Note: Name sodium benzoate and iodoform for D, E.

Solved Sample Paper-2 (Marking Scheme 2)

Question 1. Write the IUPAC name of the given compound: benzene ring with NH2 at carbon 1 and Br at carbons 2 and 4.

Solution. 2,4-Dibromoaniline (2,4-dibromobenzenamine).

Teacher's Note: Number from the carbon bearing NH2; Br at 2 (ortho) and 4 (para).

Exam Note: Parent aniline with locants 2,4 earns the mark.

Question 2. What type of magnetism is shown by a substance if its domains are arranged in equal number and in opposite directions?

Solution. Antiferromagnetism.

Teacher's Note: Equal and opposite domains cancel, giving zero net magnetic moment.

Exam Note: Do not write ferrimagnetism; that has unequal opposite domains.

Question 3. On heating Zn granules in conc. HNO3, a brown gas is evolved which undergoes dimerization on cooling. Identify the gas.

Solution. NO2 (brown gas; dimerises to colourless N2O4 on cooling). Zn + 4HNO3(conc.) → Zn(NO3)2 + 2NO2 + 2H2O.

Teacher's Note: Conc. HNO3 gives NO2; dilute HNO3 with Zn gives N2O.

Exam Note: Brown gas plus dimerisation points to NO2.

Question 4. What is the reason for the stability of colloidal sols?

Solution. Like charges on the colloidal particles cause mutual repulsion (also Brownian motion and solvation), so the particles do not aggregate.

Teacher's Note: Charge on particles is the main stabilising factor of lyophobic sols.

Exam Note: Write 'repulsion between like charges' for 1 mark.

Question 5. Out of CH2=CH–CH2Cl and CH3–CH2–CH2Cl, which is more reactive towards SN1 reaction?

Solution. CH2=CH–CH2Cl (allyl chloride), because the allyl carbocation formed is resonance stabilised.

Teacher's Note: Allylic and benzylic halides ionise easily as their carbocations are delocalised.

Exam Note: Name allyl chloride and cite resonance.

Question 6. When pyrolusite ore MnO2 is fused with KOH in presence of air, a green coloured compound (A) is obtained which undergoes disproportionation reaction in acidic medium to give a purple coloured compound (B). (i) Write the formulae of the compounds (A) and (B). (ii) What happens when compound (B) is heated?
OR The marking scheme gives the equation 2KMnO4 → K2MnO4 + MnO2 + O2 for the alternative part (heating of KMnO4).

Solution. (i) A: K2MnO4 (MnO42−); B: KMnO4 (MnO4−). (ii) On heating, KMnO4 decomposes forming K2MnO4 and oxygen gas: 2KMnO4 → K2MnO4 + MnO2 + O2.

Teacher's Note: Green manganate disproportionates in acid: 3MnO42− + 4H+ → 2MnO4− + MnO2 + 2H2O.

Exam Note: Balanced decomposition equation scores 1 mark.

Question 7. When a coordination compound PdCl2·4NH3 is mixed with AgNO3, 2 moles of AgCl are precipitated per mole of the compound. Write: (i) Structural formula of the complex. (ii) IUPAC name of the complex.

Solution. Both Cl− are ionisable. (i) [Pd(NH3)4]Cl2. (ii) Tetraamminepalladium(II) chloride.

Teacher's Note: All four NH3 are inside the coordination sphere; Pd oxidation state is +2.

Exam Note: Ligand names alphabetically, then metal with oxidation state.

Question 8. For the given cells: lead storage cell, mercury cell, fuel cell and dry cell, answer: (i) Which cell is used in hearing aids? (ii) Which cell was used in Apollo space programme? (iii) Which cell is used in automobiles and invertors? (iv) Which cell does not have long life?

Solution. (i) Mercury cell. (ii) Fuel cell. (iii) Lead storage battery. (iv) Dry cell.

Teacher's Note: Dry cell is a primary cell; it cannot be recharged and its zinc casing corrodes.

Exam Note: ½ mark for each correct cell.

Question 9. Write the chemical equations involved in the following reactions: (i) Clemmensen reduction (ii) Hell-Volhard Zelinsky reaction.
OR How do you convert: (i) Toluene to benzaldehyde (ii) Ethanoyl chloride to ethanal.

Solution. (i) Clemmensen reduction (example): CH3CHO + 4[H] (Zn-Hg/HCl) → CH3CH3 + H2O. (ii) HVZ: R–CH2–COOH (i) X2/red P, (ii) H2O → R–CHX–COOH (X = Cl or Br).
OR: (i) Etard reaction: C6H5CH3 + CrO2Cl2 (CS2) → C6H5CH(OCrOHCl2)2 (chromium complex) → (H3O+) C6H5CHO. (ii) Rosenmund reduction: CH3COCl + H2 (Pd/BaSO4) → CH3CHO + HCl. (Any other correct method.) Note: the book's conversion (ii) gives ethanal, as in the marking scheme.

Teacher's Note: HVZ puts a halogen on the α-carbon of an acid having α-hydrogen; Etard stops at the aldehyde.

Exam Note: Name the reaction and write reagents above the arrow.

Question 10. For a reaction: 2NH3(g) → N2(g) + 3H2(g) (on Pt), Rate = k. (i) Write the order and molecularity of this reaction. (ii) Write the unit of k.

Solution. (i) Order is zero; molecularity is two (or one, as accepted in the book). (ii) mol L−1 s−1.

Teacher's Note: Rate independent of [NH3] on the saturated catalyst surface gives zero order.

Exam Note: ½ + ½ for order and molecularity; 1 for unit.

Question 11. (i) What is the role of t-butyl peroxide in the polymerization of ethene? (ii) Identify the monomers in the polymer [–O–CH2–CH2–O–CO–C6H4–CO–]n (benzene-1,2-dicarbonyl unit as printed). (iii) Arrange the following polymers in the increasing order of their intermolecular forces: PVC, Nylon-6, Buna-N.
OR Write the mechanism of free radical polymerization of ethene.

Solution. (i) It acts as an initiator of the free radical chain (catalyst). (ii) Ethylene glycol (ethane-1,2-diol) and phthalic acid (the benzene dicarboxylic acid unit shown). (iii) Buna-N < PVC < Nylon-6.
OR: Chain initiation: benzoyl peroxide C6H5CO–O–O–COC6H5 → 2C6H5COO• → 2C6H5•; C6H5• + CH2=CH2 → C6H5–CH2–CH2•. Chain propagation: C6H5–CH2–CH2• + CH2=CH2 → C6H5–(CH2–CH2)2• and so on. Chain termination: two growing radicals combine to give polythene.

Teacher's Note: The ester link implies a diol and a diacid (terylene-type polyester); elastomer < thermoplastic < fibre.

Exam Note: Mention all three stages: initiation, propagation, termination.

Question 12. The rate constant for the first order decomposition of H2O2 is given by log k = 14.2 − (1.0 × 104/T) K. Calculate Ea for this reaction and rate constant k if its half-life period be 200 minutes. (R = 8.314 J K−1 mol−1)

Solution. log k = log A − Ea/(2.303RT), so Ea/(2.303R) = 1.0 × 104 K.
Ea = 2.303 × 8.314 × 1.0 × 104 = 19.15 × 104 J mol−1 = 191.5 kJ mol−1.
k = 0.693/t1/2 = 0.693/200 = 0.0034 min−1 = 3.4 × 10−3 min−1 (more precisely 3.47 × 10−3).

Teacher's Note: Match the given line to the Arrhenius equation; k from the first-order half-life.

Exam Note: Show Ea formula and units J mol−1.

Question 13. Give reasons for the following: (a) Aldehydes (R-CHO) are more reactive than ketones (R-CO-R) towards nucleophilic addition reaction. (b) Benzaldehyde does not undergo aldol condensation reaction. (c) Benzoic acid does not give Friedel-Crafts reaction.

Solution. (a) In ketones the two electron-releasing alkyl groups reduce the electrophilicity of the carbonyl carbon more effectively than the one alkyl group in aldehydes; also two alkyl groups give more steric hindrance to the incoming nucleophile. (b) Benzaldehyde has no α-hydrogen. (c) The carboxyl group is deactivating and the Lewis acid AlCl3 gets bonded to the carboxyl group.

Teacher's Note: Electronic plus steric effects govern nucleophilic addition; α-H is essential for aldol.

Exam Note: Give one-line reason for each part.

Question 14. (i) Out of silica gel and anhydrous CaCl2, which will absorb the water vapours? (ii) Out of H2SO4 and H3PO4, which one is more effective in causing coagulation of positively charged sol? Give reason. (iii) Out of sulphur sol and proteins, which one forms macromolecular colloids?

Solution. (i) Silica gel. (ii) H3PO4 is more effective in causing coagulation because of its greater negative charge (Hardy-Schulze rule). (iii) Proteins. (Flag for human check: strictly, a strong acid like H2SO4 supplies the 2− ion SO42− more readily than weak H3PO4 supplies PO43−, but the book key is H3PO4.)

Teacher's Note: Proteins are macromolecular colloids; sulphur sol is multimolecular. Hardy-Schulze: higher charge on the oppositely charged ion coagulates better.

Exam Note: In (ii) follow the marking scheme: H3PO4, Hardy-Schulze rule.

Question 15. Give reasons: (i) Mn shows the highest oxidation state of +7 with oxygen but with fluorine it shows the highest oxidation state of +4. (ii) Zn is soft whereas Cr is hard. (iii) Eu2+ is a good reducing agent.

Solution. (i) Due to the multiple bonding ability (pπ–dπ) of oxygen with transition metals. (ii) Zn has no unpaired electrons (no metallic d-d bonding), whereas Cr has unpaired electrons that contribute to strong metallic bonding. (iii) Eu2+ gets oxidised to the more stable +3 state.

Teacher's Note: Unpaired d electrons strengthen metallic bonding; Zn (3d104s2) lacks them.

Exam Note: Link hardness to number of unpaired electrons.

Question 16. What happens when: (i) 2,4,6-trinitrochlorobenzene is treated with warm water. (ii) 2-chlorobutane is treated with alcoholic KOH. (iii) Ethyl chloride is treated with Na metal in presence of dry ether. Write the equation involved in the above reactions.

Solution. (i) Nucleophilic substitution: 2,4,6-trinitrochlorobenzene + H2O (warm) → 2,4,6-trinitrophenol (picric acid) + HCl. (ii) CH3–CHCl–CH2–CH3 + alc. KOH → CH3–CH=CH–CH3 (but-2-ene, the Saytzeff major product; the book writes it as CH3CH=CHCH3) + KCl + H2O. (iii) Wurtz reaction: 2CH3CH2Cl + 2Na (dry ether) → CH3CH2CH2CH3 + 2NaCl.

Teacher's Note: Three nitro groups activate the ring for SNAr; alc. KOH dehydrohalogenates; Na couples alkyl halides.

Exam Note: Give balanced equations with conditions; name picric acid.

Question 17. Complete the following reactions: (i) C6H5–COO−NH4+ (Δ) → A (Br2/KOH) → B (CH3COCl/pyridine) → C. (ii) C6H5N2+BF4− (NaNO2/Cu, Δ) → A (Sn/HCl) → B (CHCl3/alc. KOH, Δ) → C.

Solution. (i) A = C6H5CONH2 (benzamide); B = C6H5NH2 (aniline, Hofmann bromamide); C = C6H5NHCOCH3 (acetanilide). (ii) A = C6H5NO2; B = C6H5NH2; C = C6H5NC (phenyl isocyanide, carbylamine reaction).

Teacher's Note: Hofmann degradation shortens the chain by one carbon; carbylamine test needs a primary amine.

Exam Note: ½ mark for each correctly written structure.

Question 18. (i) Write the name of two monosaccharides obtained on hydrolysis of maltose sugar. (ii) Name the vitamin whose deficiency causes convulsions. (iii) Write one example each for Fibrous protein and Globular protein.

Solution. (i) α-D-glucose and α-D-glucose (two glucose units). (ii) Vitamin B6 (pyridoxine). (iii) Fibrous protein: keratin/myosin; globular protein: insulin/albumin/haemoglobin (any one each).

Teacher's Note: Maltose is a glucose-glucose α-1,4 disaccharide; fibrous proteins are insoluble in water.

Exam Note: Give the vitamin as B6/pyridoxine.

Question 19. (i) Name the method of refining of metals such as Zirconium. (ii) In the extraction of Al, impure Al2O3 is dissolved in conc. NaOH to form sodium aluminate and leaving impurities behind. What is the name of this process? (iii) What is the function of limestone in the extraction of iron from its oxides?

Solution. (i) Van Arkel method. (ii) Leaching (Bayer's process). (iii) Limestone decomposes to CaO (flux), which removes silica impurity as slag: CaCO3 → CaO + CO2; CaO + SiO2 → CaSiO3 (slag).

Teacher's Note: Van Arkel (Zr, Ti) forms a volatile iodide that decomposes on a hot tungsten filament.

Exam Note: Write the slag equation to secure the mark.

Question 20. (i) For the complex [CoF6]3−, write the hybridisation type, magnetic character and spin of the complex. (At. number: Co = 27) (ii) Draw one of the geometrical isomers of the complex [Co(en)2Cl2]+ which is optically active.

Solution. (i) sp3d2 hybridisation; paramagnetic; high spin complex (outer orbital; F− is a weak field ligand, Co3+ is d6 with 4 unpaired electrons). (ii) The cis isomer: Co at the centre, two bidentate en ligands shown as N–N arcs and the two Cl atoms adjacent (cis); it has no plane of symmetry so is optically active.

Teacher's Note: Weak field F− does not pair electrons, so four unpaired d electrons remain.

Exam Note: Only the cis form is chiral; trans is optically inactive.

Question 21. Calculate E°cell for the following reaction at 298 K: 2Cr(s) + 3Fe2+(0.01 M) → 2Cr3+(0.01 M) + 3Fe(s). Given: Ecell = 0.261 V (printed in the book as E°cell = 0.261 V; it is the cell potential at the given concentrations).

Solution. Ecell = E°cell − (0.0591/6) log {[Cr3+]2/[Fe2+]3}
0.261 V = E°cell − (0.0591/6) log {(0.01)2/(0.01)3} = E°cell − (0.0591/6) log 102 = E°cell − (0.0591/6) × 2
E°cell = 0.261 + 0.0197 = 0.2807 V. (The book prints 0.591 in place of 0.0591; the numerical answer 0.2807 V is correct.)

Teacher's Note: Q = 1/[Fe2+]-type ratio = 100, n = 6; the given 0.261 V is actual E, not standard.

Exam Note: Show Nernst equation with n = 6 and log 100 = 2.

Question 22. An element crystallizes in a fcc lattice with cell edge of 400 pm. The density of the element is 7 g cm−3. How many atoms are present in 280 g of the element?

Solution. fcc: z = 4. Volume of unit cell = (400 × 10−10 cm)3 = 6.4 × 10−23 cm3; mass of unit cell = 7 × 6.4 × 10−23 = 4.48 × 10−22 g, containing 4 atoms.
Number of atoms in 280 g = (280/4.48 × 10−22) × 4 = 2.5 × 1024 atoms. This matches the book answer 2.5 × 1024 atoms.

Teacher's Note: Mass per unit cell = density × volume; each fcc cell holds 4 atoms.

Exam Note: Convert 400 pm = 4 × 10−8 cm before cubing.

Question 23. Due to hectic and busy schedule, Mr. Awasthi made his life full of tensions and anxiety. He started taking sleeping pills to overcome the depression without consulting the doctor. Mr. Roy, a close friend of Mr. Awasthi, advised him to stop taking sleeping pills and suggested to change his lifestyle by doing Yoga, meditation and some physical exercise. Mr. Awasthi followed his friend's advice and after few days he started feeling better. Answer: (i) What are the values (at least two) displayed by Mr. Roy? (ii) Why is it not advisable to take sleeping pills without consulting doctor? (iii) What are tranquilizers? Give two examples.

Solution. (i) Aware, concerned (or any other correct two values). (ii) Side effects and unknown health problems. (iii) Tranquilizers are neurologically active drugs / stress relievers; examples: valium, equanil (or any other two).

Teacher's Note: Tranquilizers act on the central nervous system and can cause dependence.

Exam Note: Two values and two named drugs: ½ each.

Question 24. (a) Calculate the boiling point of solution when 2 g of Na2SO4 (M = 142 g mol−1) was dissolved in 50 g of water, assuming Na2SO4 undergoes complete ionization. (Kb for water = 0.52 K kg mol−1) (b) Define the following terms: (i) Colligative properties (ii) Ideal solution.
OR (a) When 2.56 g of sulphur was dissolved in 100 g of CS2, the freezing point lowered by 0.383 K. Calculate the formula of sulphur (Sx). (Kf for CS2 = 3.83 K kg mol−1, atomic mass of S = 32 g mol−1) (b) Blood cells are isotonic with 0.9% sodium chloride solution. What happens if we place blood cells in a solution containing: (i) 1.2% sodium chloride solution? (ii) 0.4% sodium chloride solution?

Solution. (a) i = 3 for Na2SO4. ΔTb = i Kb Wb × 1000/(Mb Wa) = 3 × 0.52 × 2 × 1000/(142 × 50) = 0.44 K. Tb = 373 + 0.44 = 373.44 K (100.44 °C). (b)(i) Properties of dilute solutions that depend on the number of solute particles but not on their nature are called colligative properties. (ii) Solutions which obey Raoult's law over the entire range of concentration are ideal solutions.
OR: (a) MB = Kf Wb × 1000/(ΔTf Wa) = 3.83 × 2.56 × 1000/(0.383 × 100) = 256 g mol−1; atomicity = 256/32 = 8, so S8. (b)(i) Cells shrink. (ii) Cells swell.

Teacher's Note: Check: molality = (2/142)/0.05 = 0.282 m; 3 × 0.52 × 0.282 = 0.44 K. 256/32 = 8.

Exam Note: i = 3 for Na2SO4 is the key step.

Question 25. (a) Account for the following: (i) H2Te is more acidic than H2S. (ii) PCl5 is more covalent than PCl3. (iii) Boiling points of interhalogens are little higher as compared to pure halogens. (b) Draw the structure of: (i) HClO4 (ii) XeOF4.
OR (i) Arrange the following in the increasing order of their reducing character: H3PO3, H3PO4, H3PO2 (ii) Out of He and Xe, which one can easily form compound and why? (iii) Write the conditions to maximize the yield of ammonia in Haber's process. (iv) Write two uses of chlorine gas. (v) How can you detect the presence of SO2 gas?

Solution. (a)(i) Bond enthalpy decreases from H2S to H2Te: the H–Te bond is longer/weaker than H–S, allowing more dissociation. (ii) The +5 oxidation state of P in PCl5 gives a high charge/size ratio, making it more covalent (Fajans' rule). (iii) Interhalogens are slightly polar with dipole-dipole forces, whereas pure halogens are non-polar with only weak van der Waals forces. (b)(i) HClO4: Cl at the centre bonded to three oxygens by Cl=O bonds and to one OH group (tetrahedral). (ii) XeOF4: square pyramidal; Xe with four F atoms in the basal plane, one Xe=O at the apex and a lone pair opposite the oxygen (sp3d2).
OR: (i) H3PO4 < H3PO3 < H3PO2. (ii) Xe, because of its lower ionisation enthalpy than He. (iii) High pressure, optimum temperature and use of a catalyst (Fe). (iv) Bleaching of woodpulp/cotton/textiles; extraction of gold/platinum; manufacture of dyes, drugs, CHCl3, CCl4, DDT; sterilising water (any two). (v) SO2 decolourises acidified dilute KMnO4 solution (or changes orange acidified K2Cr2O7 to green).

Teacher's Note: Down group 16 H–E bonds weaken, so acidity rises; reducing power rises with the number of P–H bonds.

Exam Note: Show lone pair on Xe in XeOF4.

Question 26. (a) Write the product(s) in each of the following reactions: (i) CH2=CH–CH2OH (PCC) → (ii) Phenol (Zn dust) → (iii) Anisole + CH3COCl (anhyd. AlCl3) → (b) Write the mechanism of the following reaction: 2CH3CH2OH (conc. H2SO4, 413 K) → CH3CH2–O–CH2CH3.
OR (a) Write equations of the following reactions: (i) Bromine in CS2 with phenol (ii) Treating phenol with chloroform in the presence of aq. NaOH (iii) Anisole reacts with HI. (b) Distinguish between: (i) Ethanol and diethyl ether (ii) Propanol and t-butyl alcohol.

Solution. (a)(i) CH2=CH–CHO (acrolein). (ii) Benzene, C6H6. (iii) A mixture of o-methoxyacetophenone and p-methoxyacetophenone (Friedel-Crafts acylation). (b) Step 1: CH3CH2–O˙˙–H + H+ → CH3CH2–O+H2. Step 2: a second ethanol molecule attacks the protonated one (SN2), losing H2O to give CH3CH2–O+(H)–CH2CH3. Step 3: loss of H+ gives CH3CH2–O–CH2CH3.
OR: (a)(i) Phenol + Br2 (CS2, 273 K) → o-bromophenol + p-bromophenol (p-isomer major). (ii) Reimer-Tiemann: phenol + CHCl3 + aq. NaOH → sodium phenoxide-CHCl2 intermediate → sodium salicylaldehyde (NaOH) → (H+) salicylaldehyde (2-hydroxybenzaldehyde). (iii) C6H5OCH3 + HI → C6H5OH + CH3I. (b)(i) Ethanol gives a pleasant fruity (ester) smell on heating with acetic acid/acetic anhydride and a few drops of conc. H2SO4; diethyl ether does not. (ii) Lucas test: t-butyl alcohol with anhydrous ZnCl2 and conc. HCl gives immediate turbidity; propanol (primary) does not (or any other correct test).

Teacher's Note: PCC stops oxidation at the aldehyde; anisole acylates at o/p positions; Zn dust removes OH from phenol.

Exam Note: Ether cleavage gives phenol and alkyl iodide.

Pradeep's KL Gogia Solutions for Class 12 Mathematics: Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter Solved Practice Papers Part 1

Chapter-wise Pradeep's KL Gogia Solutions: Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter Solved Practice Papers Part 1

Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter Solved Practice Papers Part 1 tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Mastering Core Concepts with Pradeep's KL Gogia Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your Class 12 Exam Preparation

In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.