Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 6 General Principles Processes Of Isolation Of Elements

Step-by-Step Pradeep's KL Gogia Solutions for Class 12 Chemistry Chapter 06 General Principles Processes Of Isolation Of Elements

Access comprehensive textbook solutions for Chapter 06 General Principles Processes Of Isolation Of Elements using the Pradeep's KL Gogia reference material for Class 12 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 06 General Principles Processes Of Isolation Of Elements Textbook Solutions PDF

Access the complete solution PDF for Class 12 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

General Principles and Processes of Isolation of Elements - Questions with Answers

Very Short Answer Type Questions (1 Mark)

Question VSA 1. Name three metals which occur in native state in nature.

Solution. Au, Ag and Pt.

Teacher's Note: Unreactive metals low in the reactivity series occur free.

Exam Note: Name three; one mark.

Question VSA 2. What are collectors in froth floatation process? Give one example.

Solution. Pine oil.

Teacher's Note: Collectors enhance non-wettability of ore particles by water so they stick to froth.

Exam Note: Name any one: pine oil.

Question VSA 3. Give the names and formulae of three ores which are concentrated by froth floatation process.

Solution. Galena (PbS), Zinc blende (ZnS), Cinnabar (HgS).

Teacher's Note: Froth floatation suits sulphide ores only.

Exam Note: Give both name and formula.

Question VSA 4. Among Fe, Cu, Al and Pb, which metal(s) cannot be obtained by smelting?

Solution. Al.

Teacher's Note: Al is too reactive; carbon cannot reduce its oxide. Electrolysis is used.

Exam Note: Answer: Al only.

Question VSA 5. What is the thermodynamic criteria for the feasibility of a reaction?

Solution. ΔG should be negative or log K = positive.

Teacher's Note: ΔG = −RT ln K, so negative ΔG means K > 1.

Exam Note: State both ΔG and K criteria.

Question VSA 6. Why can't aluminium be reduced by carbon?

Solution. Hint: Al is a stronger reducing agent than carbon.

Teacher's Note: Al–O bond is stronger than C–O at feasible temperatures (Ellingham diagram).

Exam Note: One line suffices.

Question VSA 7. Name the most important form of iron. Mention its one use.

Solution. Cast iron is used for making gutter pipes, castings, railway sleepers, toys etc.

Teacher's Note: Cast iron is the most important form; it has the highest carbon (2.5–4%).

Exam Note: Name plus one use.

Question VSA 8. Name the impurities present in bauxite ore.

Solution. SiO2, Fe2O3 and TiO2.

Teacher's Note: Leaching with NaOH removes these from Al2O3.

Exam Note: List all three impurities.

Question VSA 9. What is the composition of copper matte?

Solution. Hint: Cu2S and FeS.

Teacher's Note: Matte is Cu2S with FeS, before Bessemerisation.

Exam Note: Write both formulae.

Question VSA 10. Which form of copper is called blister copper?

Solution. Hint: The solidified copper obtained has blistered appearance due to the evolution of SO2, so it is called blistered copper.

Teacher's Note: Dissolved SO2 escapes on cooling, giving blisters.

Exam Note: Mention SO2 evolution.

Question VSA 11. What are froth stabilizers? Give two examples.

Solution. Hint: Examples are cresol and aniline.

Teacher's Note: Stabilisers keep the froth stable so ore particles stay on top.

Exam Note: Give two examples.

Question VSA 12. A sample of galena is contaminated with zinc blende. Name one chemical which can be used to concentrate galena selectively by froth floatation method.

Solution. NaCN.

Teacher's Note: NaCN is a depressant: it stops ZnS reaching the froth but lets PbS through.

Exam Note: Name NaCN as depressant.

Question VSA 13. What are the constituents of German silver?

Solution. Cu = 25–30%, Zn = 25–30%, Ni = 40–50%.

Teacher's Note: German silver contains no silver; it is a Cu–Zn–Ni alloy.

Exam Note: Give all three metals.

Question VSA 14. Why is froth floatation process selected for concentration of the sulphide ore?

Solution. Sulphide ore particles are wetted by oil (pine oil) and gangue particles by water.

Teacher's Note: Preferential wetting separates ore (in froth) from gangue (in water).

Exam Note: Mention preferential wetting by oil.

Question VSA 15. Write the reaction involved in the extraction of copper from low grade ores.

Solution. First step is leaching of ore with acid or bacteria then,
Cu2+ (aq) + H2 (g) → Cu (s) + 2H+ (g)

Teacher's Note: This is hydrometallurgy: H2 reduces Cu2+ since Cu is below H.

Exam Note: Write the balanced equation.

Question VSA 16. Although aluminium is above hydrogen in the electrochemical series, it is stable in air and water. Why?

Solution. Hint: Due to formation of inert oxide Al2O3.

Teacher's Note: A thin protective oxide film passivates aluminium.

Exam Note: Mention the inert oxide layer.

Question VSA 17. Which method of purification is represented by the following reaction:
Ti (s, impure) + 2I2 (g) → TiI4 (g) →(Δ) Ti (s, pure) + 2I2 (g)

Solution. Hint: Van Arkel method.

Teacher's Note: Volatile iodide forms, then decomposes on hot filament giving pure metal.

Exam Note: Name: Van Arkel method.

Question VSA 18. Zinc is used but not copper for the recovery of metallic silver from the complex [Ag(CN)2]−, although electrode potentials of both zinc and copper are less than that of Ag. Explain why?

Solution. Hint: Zinc reacts at faster rate as compared with copper, further zinc is cheaper than copper.

Teacher's Note: Both can displace Ag; Zn is faster and cheaper.

Exam Note: Give both reasons: rate and cost.

Question VSA 19. Write the composition of molten mixture which is electrolysed to extract aluminium.

Solution. Hint: Molten Al2O3 + Na3AlF6 or CaF2.

Teacher's Note: Cryolite and fluorspar lower the melting point and raise conductivity.

Exam Note: Write alumina with cryolite.

Short Answer-I Type Questions (2 Marks)

Question SA-I 1. What is hydrometallurgy? Give one example where it is used for metal extraction.

Solution. Leaching followed by reduction is called hydrometallurgy. It is used in extraction of copper.

Teacher's Note: Metal is dissolved by leaching then displaced by a more reactive metal or H2.

Exam Note: Definition plus example earns both marks.

Question SA-I 2. Name the process for the benefaction/concentration of (i) an ore having lighter impurities, (ii) sulphide ore.

Solution. Hint: (i) Gravity separation (ii) Froth floatation.

Teacher's Note: Gravity separation exploits density difference; floatation exploits wetting.

Exam Note: Name both processes.

Question SA-I 3. Mention the role of cryolite in the extraction of aluminium.

Solution. Hint: It lowers the melting point of the mixture and brings conductivity.

Teacher's Note: Pure Al2O3 melts near 2323 K and conducts poorly.

Exam Note: State both roles.

Question SA-I 4. Mention the role of following: (a) SiO2 in the metallurgy of Cu. (b) CaCO3 in the metallurgy of Fe. (c) CO in the metallurgy of iron. (d) I2 in the purification of zirconium.

Solution. Hint: (a) Flux. (b) CaCO3 decomposed to CaO, which acts as flux. (c) Reducing agent. (d) To form a volatile complex with Zr.

Teacher's Note: SiO2 combines with FeO to form FeSiO3 slag; CaO removes SiO2.

Exam Note: One mark-worthy phrase per part.

Question SA-I 5. Extraction of copper directly from sulphide ore is less favourable than from its oxide through reduction. Explain.

Solution. 2CuS (s) + C (s) → CS2 (l) + 2Cu (s)
CuO (s) + C (s) → CO (g) + Cu (s)
ΔG value is more negative in second case as compared with first case.

Teacher's Note: CS2 formation is endothermic, so sulphide reduction is less feasible.

Exam Note: Compare ΔG of both reactions.

Question SA-I 7. Write the chemical formulae of the following ores: (a) Haematite (b) Magnetite (c) Limonite (d) Siderite

Solution. (a) Fe2O3 (b) Fe3O4 (c) Fe2O3.2H2O (d) FeCO3

Teacher's Note: Limonite is the hydrated oxide; siderite is the carbonate ore.

Exam Note: Half mark per formula.

Question SA-I 8. Give equations for the industrial extraction of zinc from calamine.

Solution. ZnCO3 → ZnO + CO2 (Calcination)
ZnO + C → Zn + CO (Reduction)

Teacher's Note: Calamine is a carbonate: calcine first, then reduce with coke.

Exam Note: Label calcination and reduction.

Question SA-I 9. Name the elements present in anode mud during refining of copper. Why does it contain such elements?

Solution. Au and Ag. They are not oxidized at anode. They are less electropositive than copper.

Teacher's Note: Less reactive impurities settle below the anode as mud.

Exam Note: Name Au, Ag and give reason.

Question SA-I 10. Write the chemical reactions taking place in different zones in the blast furnace for the extraction of iron from its ore.

Solution. Hint: (i) C + CO2 → 2CO
(ii) 3Fe2O3 + CO → 2Fe3O4 + CO2
(iii) Fe3O4 + CO → 3FeO + CO2 (Corrected: the book prints 2FeO, which is unbalanced)
(iv) FeO + CO → Fe + CO2
(v) CaCO3 → CaO + CO2
(vi) CaO + SiO2 → CaSiO3

Teacher's Note: Reduction by CO proceeds stepwise in the upper zones; slag forms in the lower zone.

Exam Note: Write each step balanced.

Question SA-I 11. How are impurities separated from bauxite ore to get pure alumina?

Solution. Hint: By leaching.
(i) Al2O3 (s) + 2NaOH (aq) + 3H2O (l) → 2Na[Al(OH)4] (aq)
(ii) 2Na[Al(OH)4] (aq) + CO2 (g) → Al2O3.xH2O (s) + 2NaHCO3 (aq)
(iii) Al2O3.xH2O → Al2O3 (s) + xH2O (g) (alumina)

Teacher's Note: Amphoteric Al2O3 dissolves in NaOH; Fe2O3, TiO2 stay behind.

Exam Note: Write all three steps (Bayer process).

Question SA-I 12. Why is the reduction of a metal oxide easier if metal formed is in liquid state at the temperature of reduction?

Solution. Hint: Entropy is more positive when the metal is in liquid state as compared with solid state, so ΔG becomes more negative.

Teacher's Note: ΔG = ΔH − TΔS; larger ΔS lowers ΔG.

Exam Note: Link liquid state to entropy and ΔG.

Question SA-I 13. What is pyrometallurgy? Explain with one example.

Solution. A process of reducing a metal oxide by heating with either coke or some other reducing agent. E.g., Al, Mg etc.
ZnO + C →(975 K) Zn + CO

Teacher's Note: Heat-based reduction of the oxide, e.g. ZnO with carbon.

Exam Note: Definition plus balanced example.

Question SA-I 14. Write the method to produce copper matte from copper pyrites.

Solution. Hint: Froth floatation.

Teacher's Note: Concentrated pyrites is then roasted and smelted to give matte.

Exam Note: Name froth floatation.

Question SA-I 15. Copper can be extracted by hydrometallurgy but not zinc. Explain why?

Solution. Hint: E°(Zn2+/Zn) = −ve, E°(Cu2+/Cu) = +ve

Teacher's Note: H2 can reduce Cu2+ (positive E°) but not Zn2+ (negative E°).

Exam Note: Compare the two E° values.

Question SA-I 16. Gibbs energy of formation ΔfG° of MgO (s) and CO (g) at 1273 K and 2273 K are given below:
ΔfG [MgO (s)] = −941 kJ mol−1 at 1273 K
ΔfG [CO (g)] = −439 kJ mol−1 at 1273 K
ΔfG [MgO (s)] = −314 kJ mol−1 at 2273 K
ΔfG [CO (g)] = −628 kJ mol−1 at 2273 K
On the basis of above data, predict the temperature at which carbon can be used as a reducing agent for MgO (s).

Solution. For the reaction, MgO (s) + C (s) → Mg (s) + CO (g)
At 1273 K, ΔrG = ΔfG[CO (g)] − ΔfG[MgO (s)] = −439 − (−941) kJ mol−1 = 502 kJ mol−1
At 2273 K, ΔrG = −628 − (−314) kJ mol−1 = −314 kJ mol−1
The temperature is 2273 K.

Teacher's Note: ΔrG is positive at 1273 K (not feasible) and negative at 2273 K (feasible).

Exam Note: Compute ΔrG at both temperatures.

Short Answer-II Type Questions (3 Marks)

Question SA-II 1. State the principle of refining of metal by the following methods: (a) Zone refining (b) Electrolytic refining (c) Vapour phase refining

Solution. Hint: (a) The impurities are more soluble in the melt than in the solid state of the metal. (b) Impure metal is made to act as anode, while the strip of same metal in pure form as cathode. (Part (c) has no printed answer in the source.)

Teacher's Note: Zone refining moves a molten zone carrying impurities along a rod.

Exam Note: One principle line per method.

Question SA-II 2. How is pure copper obtained from its principle ore? Write the chemical reactions occurring during the extraction.

Solution. Hint: (i) 2CuFeS2 + O2 → Cu2S + 2FeS + SO2 (Corrected: the book prints O2 on the right side)
(ii) Cu2S + 3O2 → 2Cu2O + 2SO2
(iii) Cu2O + C → 2Cu + CO
(iv) 2Cu2O + Cu2S → 6Cu + SO2

Teacher's Note: Copper pyrites is roasted, smelted to matte, then self-reduced in a Bessemer converter.

Exam Note: Give roasting, matte and self-reduction steps.

Question SA-II 3. Name the method of refining of the following metals: (a) Hg (b) Sn (c) Cu (d) Ge (e) Ni (f) Zr

Solution. (a) Distillation, (b) Liquation, (c) Electrolytic refining, (d) Zone refining, (e) Mond process, (f) Van Arkel process

Teacher's Note: Match metal property to method: volatile, low-melting, semiconductor, carbonyl, iodide.

Exam Note: Half mark per method.

Question SA-II 4. The native silver forms a water soluble compound (B) with dilute aqueous solution of NaCN in the presence of a gas (A). The silver metal is obtained by the addition of a metal (C) to (B) and complex (D) is formed as a byproduct. Write the structures of (C) and (D) and identify (A) and (B) in the following sequence:
Ag + NaCN + [A] + H2O → [B] + OH− + Na+; [C] + [B] → [D] + Ag

Solution. [A] = O2
[B] = Na[Ag(CN)2]
[C] = Zn
[D] = Na2[Zn(CN)4]

Teacher's Note: Oxygen oxidises Ag in the cyanide process; Zn then displaces it.

Exam Note: Identify all four species.

Question SA-II 5. In the cyanide extraction process of silver from argentite ore, name the oxidizing and reducing agents. Write the chemical equations of the reactions involved.

Solution. Hint: 4Ag + 8NaCN + 2H2O + O2 → 4Na[Ag(CN)2] + 4NaOH
2[Ag(CN)2]− (aq) + Zn (s) → [Zn(CN)4]2− (aq) + 2Ag (s)
(Names, deduced from the equations: O2 is the oxidising agent in the first step; Zn is the reducing agent in the second.)

Teacher's Note: Identify oxidant and reductant from the electron transfer in each step.

Exam Note: Equations plus both agents.

Matching Type Questions

Question Matching 1. Match the items of Column I with items of Column II and assign the correct code:
Column IColumn II
(A) Pendulum(1) Chrome steel
(B) Malachite(2) Nickel steel
(C) Calamine(3) Na3AlF6
(D) Cryolite(4) CuCO3.Cu(OH)2
(5) ZnCO3

Solution. (A) → (2), (B) → (4), (C) → (5), (D) → (3)

Teacher's Note: Know ore formulae: malachite is basic copper carbonate, calamine ZnCO3.

Exam Note: Match ores to formulae.

Question Matching 2. Match the items of Column I with items of Column II and assign the correct code:
Column IColumn II
(A) Coloured bands(1) Zone refining
(B) Impure metal to volatile complex(2) Fractional distillation
(C) Purification of Ge and Si(3) Mond process
(D) Purification of mercury(4) Chromatography
(5) Liquation

Solution. (A) → (4), (B) → (3), (C) → (1), (D) → (2)

Teacher's Note: Chromatography separates coloured bands; semiconductors use zone refining.

Exam Note: Link method to metal purified.

Question Matching 3. Match the items of Column I with items of Column II and assign the correct code:
Column IColumn II
(A) Cyanide process(1) Ultrapure Ge
(B) Froth floatation process(2) Dressing of ZnS
(C) Electrolytic reduction(3) Extraction of Al
(D) Zone refining(4) Extraction of Au
(5) Purification of Ni

Solution. (A) → (4), (B) → (2), (C) → (3), (D) → (1)

Teacher's Note: Cyanide leaches Au/Ag; Al needs electrolytic reduction.

Exam Note: Match process to metal or ore.

Question Matching 4. Match the items of Column I with items of Column II and assign the correct code:
Column IColumn II
(A) Sapphire(1) Al2O3
(B) Sphalerite(2) NaCN
(C) Depressant(3) Co
(D) Corundum(4) ZnS
(5) Fe2O3

Solution. (A) → (3), (B) → (4), (C) → (2), (D) → (1)

Teacher's Note: Sapphire is Al2O3 coloured by Co impurity; sphalerite is ZnS.

Exam Note: Printed answer pairs sapphire with Co.

Question Matching 5. Match the items of Column I with items of Column II and assign the correct code:
Column IColumn II
(A) Blistered Cu(1) Aluminium
(B) Blast furnace(2) 2Cu2O + Cu2S → 6Cu + SO2
(C) Reverberatory furnace(3) Iron
(D) Hall-Heroult process(4) FeO + SiO2 → FeSiO3
(5) 2Cu2S + 3O2 → 2Cu2O + 2SO2

Solution. (A) → (2), (B) → (3), (C) → (4), (D) → (1)

Teacher's Note: Reverberatory furnace removes FeO as slag; blast furnace makes iron.

Exam Note: Match furnace or process to metal.

Step-by-Step Pradeep's KL Gogia Solutions for Class 12 Math

Chapter-wise Pradeep's KL Gogia Solutions: Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 6 General Principles Processes Of Isolation Of Elements

Review detailed solutions for Class 12 Mathematics. The Pradeep's KL Gogia Solutions Class 12 Chemistry Chapter 6 General Principles Processes Of Isolation Of Elements PDF provides comprehensive answers mapped to standard Pradeep's KL Gogia Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Detailed Calculation Guides for Class 12

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Explore More Study Resources for Class 12 Math

In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 12 Chemistry?

They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 12 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 12 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 12 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 12 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.