Xam Idea Solutions Class 12 Physics Chapter 5 Magnetism And Matter Short Answer Questions II

Official Textbook Solutions: Class 12 Physics Chapter 05 Magnetism And Matter

Access comprehensive textbook solutions for Chapter 05 Magnetism And Matter using the reference material for Class 12 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Physics: Chapter 05 Magnetism And Matter

Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Short Answer Questions II

Question 1. Answer the following questions. (i) What happens when a diamagnetic substance is placed in a varying magnetic field? (ii) Name the properties of a magnetic material that make it suitable for making (a) a permanent magnet and (b) a core of an electromagnet. [CBSE (F) 2009]

Solution.

(i) A diamagnetic substance is attracted towards a region of weaker magnetic field.

(ii) (a) Permanent magnets are made of steel which is characterised by high retentivity and high coercivity.

(b) Electro magnets are made of soft iron which is characterised by low retentivity and low coercivity.

Teacher's Note: Permanent magnets need high retentivity and coercivity, while electromagnet cores need low retentivity and low coercivity.

Exam Note: Give both property sets with steel and soft iron.

Question 2. What are permanent magnets? What is an efficient way of preparing a permanent magnet? Write two characteristic properties of materials which are required to select them for making permanent magnets.

Solution.

Permanent Magnets: The magnets prepared from ferromagnetic materials which retain their magnetic properties for a long time are called permanent magnets.

An efficient way to make a permanent magnet is to place a ferromagnetic rod in a solenoid and pass a current. The magnetic field of the solenoid magnetises the rod.

The materials used for permanent magnet must have the following characteristic properties:

(i) High retentivity so that the magnet may cause strong magnetic field.

(ii) High coercivity so that the magnetisation is not wiped out by strong external fields, mechanical ill-treatment and temperature changes. The loss due to hysteresis is immaterial because the magnet in this case is never put to cyclic changes.

Teacher's Note: Permanent magnets are ferromagnets that keep magnetism, made by placing a rod in a solenoid.

Exam Note: Define; give two properties.

Question 3. Distinguish between diamagnetic and ferromagnetic materials in respect of their (i) intensity of magnetisation (ii) behaviour in non-uniform magnetic field and (iii) susceptibility.

Solution.

S. No.PropertyDiamagneticFerromagnetic
(i)Intensity of magnetisationNegative and very smallPositive and very large
(ii)Behaviour in non-uniform magnetic fieldAttracted towards a region of weaker magnetic fieldAttracted towards a region of stronger magnetic field
(iii)SusceptibilityNegative and small, 0 < |χ| << 1Positive and large, of the order of hundreds and thousands

Teacher's Note: The classes differ in sign and size of susceptibility, magnetisation and behaviour in non-uniform fields.

Exam Note: Tabulate points side by side.

Question 4. The magnetic properties of the different materials A, B and C are shown in the following table: Material Permeability Susceptibility Temperature dependence of susceptibility A Low positive Small but negative Independent of temperature High Very high 1 Susceptibility decreases with temperature Greater than 1 Small but positive Decreases with temperature Which of the above three materials should be used for making an electromagnet and why?

Solution.

The material to be used for making an electromagnet should have high permerability and low retentivity. Moreover, less energy should be utilised for magnetisation of the material.

Thus, material B should be used for making the core of an electromagnet.

Teacher's Note: An electromagnet core needs high permeability and low retentivity so it demagnetises when current stops.

Exam Note: Choose high permeability, low retentivity.

Question 5. Depict the field-line pattern due to a current carrying solenoid of finite length. (i) In what way do these lines differ from those due to an electric dipole? (ii) Why can’t two magnetic field lines intersect each other?

Solution.

Solenoid field linesElectric dipole field lines

(i) The magnetic field lines of a solenoid form continuous closed loops (they pass through the inside of the solenoid), whereas electric field lines of a dipole start on the positive charge and end on the negative charge and do not form closed loops.

(ii) Two magnetic field lines cannot intersect because at the point of intersection, there will be two directions of magnetic field which is impossible.

Teacher's Note: Magnetic lines form closed loops; electric dipole lines begin and end on charges.

Exam Note: Lines never cross: one direction per point.

Question 6. Explain the following: (i) Why do magnetic field lines form continuous closed loops? (ii) Why are the field lines repelled (expelled) when a diamagnetic material is placed in an external uniform magnetic field?

Solution.

SN

(i) Magnetic lines of force form continuous closed loops because a magnet is always a dipole and as a result, the net magnetic flux of a magnet is always zero.

(ii) When a diamagnetic substance is placed in an external magnetic field, a feeble magnetism is induced in opposite direction. So, magnetic lines of force are repelled.

Teacher's Note: No isolated poles exist, so lines have no start or end; diamagnets oppose the applied field.

Exam Note: Closed loops: no monopoles; induced opposite magnetism.

Question 7. (i) Mention two properties of soft iron due to which it is preferred for making an electromagnet. (ii) State Gauss’s law in magnetism. How is it different from Gauss’s law in electrostatics and why?

Solution.

(i) Low coercivity and high permeability.

(ii) Gauss’s Law in magnetism: The net magnetic flux through any closed surface is zero, ∮ B·dS = 0.

Gauss’s Law in electrostatics: The net electric flux through any closed surface is 1/ε0 times the net charge, ∮ E·dS = q/ε0.

The difference between Gauss’s law of magnetism and that for electrostatics is a reflection of the fact that magnetic monopoles do not exist, i.e. magnetic poles always exist in pairs.

Teacher's Note: Soft iron magnetises and demagnetises easily; magnetic flux through a closed surface is always zero.

Exam Note: Magnetic flux zero because monopoles do not exist.

Question 8. Show diagrammatically the behaviour of magnetic field lines in the presence of (i) paramagnetic and (ii) diamagnetic substances. How does one explain this distinguishing feature?

Solution.

SNSN(i) Paramagnetic substance(ii) Diamagnetic substance

A paramagnetic material tends to move from weaker field to stronger field regions of the magnetic field. So, the number of lines of magnetic field increases when passing through it. Magnetic dipole moments are induced in the direction of magnetic field. Paramagnetic materials have a small positive susceptibility.

A diamagnetic material tends to move from stronger field to weaker field region of the magnetic field. So, the number of lines of magnetic field passing through it decreases. Magnetic dipole moments are induced in the opposite direction of the applied magnetic field. Diamagnetic materials have a negative susceptibility in the range (−1 ≤ χ < 0).

Teacher's Note: Paramagnets concentrate field lines; diamagnets expel them.

Exam Note: Draw lines in, lines out; explain by induced moment.

Question 9. In what way is Gauss’s law in magnetism different from that used in electrostatics? Explain briefly. The Earth’s magnetic field at the Equator is approximately 0.4 G. Estimate the Earth’s magnetic dipole moment. Given: Radius of the Earth = 6400 km.

Solution.

Isolated positive or negative charge exists freely. So, Gauss’s law in electrostatics states that ∮ E·dS = q/ε0.

Isolated magnetic poles do not exist. So, Gauss’s law in magnetism states that ∮ B·dS = 0.

Magnetic field intensity at the equator is B = (μ0/4π) m/R3 = 10−7 m/R3

∴ m = 107 B R3 = 107 × 0.4 × 10−4 × (6400 × 103)3 ≈ 1.05 × 1023 A m2

Teacher's Note: Electric charges exist alone, magnetic poles do not; equator field is mu0 m / 4 pi R cubed.

Exam Note: Dipole moment is about 1.05e23 A m squared.

Question 10. A circular coil of radius 10 cm, 500 turns and resistance 200 Ω is placed with its plane perpendicular to the horizontal component of the Earth’s magnetic field. It is rotated about its vertical diameter through 180° in 0.25 s. Estimate the magnitudes of the emf and current induced in the coil. (Horizontal component of the Earth’s magnetic field at the place is 3.0 × 10−5 T)

Solution.

Initial magnetic flux, φi = NBA = 500 × 3 × 10−5 × π(0.1)2 = 15π × 10−5 Wb

On turning by 180°, final flux, φf = −NBA = −15π × 10−5 Wb

Change in flux = 30π × 10−5 Wb ≈ 9.42 × 10−4 Wb

Induced emf = Δφ/Δt = 9.42 × 10−4/0.25 ≈ 3.8 × 10−3 V

Induced current I = emf/R = 3.8 × 10−3/200 ≈ 1.9 × 10−5 A

Teacher's Note: Flux changes sign on turning 180 degrees, so emf is the change in flux over time.

Exam Note: Find flux change, emf, then current by Ohm's law.

Question 11. The horizontal component of earth’s magnetic field at a given place is 0.4 × 10−4 Wb/m² and angle of dip is 30°. Calculate the value of (i) Vertical component (ii) Total intensity of earth’s magnetic field.

Solution.

(i) Given H = 0.4 × 10−4 Wb/m², θ = 30°

tan θ = V/H ⇒ V = H tan θ = 0.4 × 10−4 × tan 30° = (0.4 × 10−4)/√3 = 0.23 × 10−4 Wb/m²

(ii) Be = √(H² + V²) = √[(0.4 × 10−4)² + ((0.4 × 10−4)/√3)²] = 0.46 × 10−4 Wb/m²

Teacher's Note: Vertical component is H tan(dip); total field is the vector sum of H and V.

Exam Note: Use V = H tan(dip), then root of sum of squares.

Question 12. Draw diagrams to depict the behaviour of magnetic field lines near a ‘bar’ of: (i) Copper (ii) Aluminium (iii) Mercury, cooled to a very low temperature (4.2 K).

Solution.

SNSNSN(i) Copper bar(ii) Aluminium bar(iii) Mercury at 4.2 K

(i) Copper is diamagnetic.

(ii) Aluminium is paramagnetic.

(iii) Mercury cooled to low temperature (4.2 K) is a superconductor. It behaves as a perfect diamagnet, so no lines of force pass through it.

Teacher's Note: Copper is diamagnetic, aluminium paramagnetic, and superconducting mercury a perfect diamagnet.

Exam Note: Lines expelled, concentrated, fully expelled.

Question 13. The variation of intensity of magnetisation I and the applied magnetic field intensity H for three magnetic materials X, Y and Z are as shown in the given graphs. (i) Identify the materials X, Y and Z. (ii) Show graphically the variation of susceptibility with temperature for X. (iii) Put of Y and Z, which of the material will you prefer for making transformer cores and why?

Solution.

IHYZX

(i) X — diamagnetic, Z — paramagnetic, Y — ferromagnetic.

(ii) For X (diamagnetic) the susceptibility is negative and independent of temperature:

χT

(iii) Y will be preferred to be used in the transformer core because it has high permeability and low hysteresis loss.

Teacher's Note: Slope of I against H gives susceptibility: negative for X, small positive for Z, large for Y.

Exam Note: Match slopes to materials; choose soft ferromagnet.

Download Xam Idea Solutions for Class 12 Math PDF

Download Xam Idea Solutions for Class 12

Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Physics Chapter 5 Magnetism And Matter Short Answer Questions II tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for Class 12 Math

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.