Xam Idea Solutions Class 12 Physics Chapter 11 Dual Nature Of Matter And Radiation Short Answer Questions I

Step-by-Step Solutions for Class 12 Physics Chapter 11 Dual Nature Of Matter And Radiation

Access comprehensive textbook solutions for Chapter 11 Dual Nature Of Matter And Radiation using the reference material for Class 12 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 11 Dual Nature Of Matter And Radiation Textbook Solutions PDF

View or download the dedicated Chapter 11 Dual Nature Of Matter And Radiation solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.

Short Answer Questions I

Question 1. Write Einstein’s photoelectric equation and point out any two characteristic properties of photons on which this equation is based. [CBSE (AI) 2013]

Solution.

If radiation of frequency ν greater than the threshold frequency ν0 falls on a metal surface, electrons are emitted. Einstein’s photoelectric equation is

hν = φ0 + Kmax = hν0 + ½mvmax2,   i.e.   Kmax = hν − hν0

Characteristic properties of photons on which it is based:

(i) The energy of a photon is directly proportional to the frequency (inversely proportional to the wavelength): E = hν = hc/λ.

(ii) In a photon–electron collision, the total energy and momentum of the system of the two particles are conserved.

(iii) In the interaction of a photon with a free electron, the entire energy of the photon is absorbed.

Teacher's Note: Each photon gives all its energy hν to one electron; part pays the work function, the rest is kinetic energy.

Exam Note: Write K_max = hν − φ₀; state two photon properties.

Question 2. Write three characteristic features in photoelectric effect which cannot be explained on the basis of wave theory of light, but can be explained only using Einstein’s equation. [CBSE Delhi 2016]

Solution.

The three characteristic features which cannot be explained by wave theory are:

(i) The kinetic energy of the emitted electrons is independent of the intensity of the incident light.

(ii) There is no emission of electrons if the frequency of the incident light is below a certain frequency (threshold frequency), whatever the intensity.

(iii) The photoelectric effect is an instantaneous process (no time lag).

Teacher's Note: Wave theory predicts energy depends on intensity and allows a time lag; experiments show frequency decides and emission is instant.

Exam Note: Name intensity-independence, threshold frequency, instantaneous emission.

Question 3. A proton and an electron have same velocity. Which one has greater de Broglie wavelength and why? [CBSE (AI) 2012]

Solution.

de Broglie wavelength λ = h/mv. Given vp = ve, so λ ∝ 1/m, i.e. λe/λp = mp/me.

Since mp > me (mp ≈ 1836 me), λe > λp. Thus the electron has the greater de Broglie wavelength.

Teacher's Note: At equal speed, momentum is proportional to mass, so the lighter particle has the longer wavelength.

Exam Note: λ = h/mv; electron lighter, so longer wavelength.

Question 4. When the electron orbiting in hydrogen atom in its ground state moves to the third excited state, show how the de Broglie wavelength associated with it would be affected. [CBSE Ajmer 2015]

Solution.

de Broglie wavelength λ = h/mv. In the n-th Bohr orbit, mv rn = nh/2π, so λn = 2πrn/n.

Since rn ∝ n2, λn ∝ n. Equivalently the speed v ∝ 1/n, so λ = h/mv ∝ n.

Ground state: n = 1. Third excited state: n = 4.

λ4/λ1 = 4, so the de Broglie wavelength becomes four times.

Teacher's Note: In Bohr’s model v falls as 1/n, so λ = h/mv grows in proportion to n.

Exam Note: Third excited state is n = 4; λ ∝ n.

Question 5. What is meant by work function of a metal? How does the value of work function influence the kinetic energy of electrons liberated during photoelectron emission? [CBSE Delhi 2013; (AI) 2013]

Solution.

Work function: the minimum energy required to free an electron from the surface of a metal.

From Kmax = hν − φ0, for a given frequency the smaller the work function, the larger the kinetic energy of the emitted electrons.

Teacher's Note: For the same photon energy, whatever is not spent on escaping the metal becomes kinetic energy.

Exam Note: Define φ₀; K_max = hν − φ₀, smaller φ₀ gives larger K.

Question 6. Monochromatic light of frequency 6 × 1014 Hz is produced by a laser. The power emitted is 2.0 × 10−3 W. How many photons per second on an average are emitted by the source? [CBSE Guwahati 2015]

Solution.

Power of radiation P = (nhν)/t = Nhν, where N is the number of photons emitted per second.

N = P/hν = (2.0 × 10−3)/(6.63 × 10−34 × 6 × 1014) = 5 × 1015 photons per second.

Teacher's Note: Power is energy per second, so dividing by the energy hν of one photon gives photons per second.

Exam Note: N = P/hν = 5 × 10¹⁵ per second.

Question 7. Plot a graph showing the variation of photoelectric current with intensity of light. The work function for the following metals is given: Na: 2.75 eV and Mo: 4.175 eV. Which of these will not give photoelectron emission from a radiation of wavelength 3300 Å from a laser beam? What happens if the source of laser beam is brought closer? [CBSE (F) 2016]

Solution.

Photoelectric current is directly proportional to the intensity of light (for frequency above threshold), so the graph is a straight line through the origin.

Intensity of lightPhotoelectric currentO

Energy of photon E = hc/λ = (6.63 × 10−34 × 3 × 108)/(1.6 × 10−19 × 3.3 × 10−7) eV = 3.75 eV.

The work function of Mo (4.175 eV) is greater than E, so Mo will not give photoemission. Na (2.75 eV < 3.75 eV) will.

Bringing the source closer increases the intensity. There is no effect for Mo (still no emission). For Na the photocurrent increases.

Teacher's Note: Emission needs photon energy above the work function; intensity only changes the count of emitted electrons.

Exam Note: Compute 3.75 eV; compare with each work function.

Question 8. The given graph shows the variation of photo-electric current (I) with the applied voltage (V) for two different materials and for two different intensities of the incident radiations. Identify and explain using Einstein’s photo electric equation for the pair of curves that correspond to (i) Different materials but same intensity of incident radiation, (ii) Different intensities but same materials. [CBSE East 2016]

Solution.

VI1234−V₀(1,3)−V₀(2,4)

Stopping potential: eV0 = hν − φ0 depends on the material (φ0) and frequency, not on intensity. Saturation current depends on the intensity (number of photons), not on the material.

(i) Curves 1 and 2, and curves 3 and 4, correspond to the same intensity but different materials, because their saturation currents are the same and their stopping potentials are different.

(ii) Curves 1 and 3, and curves 2 and 4, correspond to different intensities but the same material, because their stopping potentials are the same and their saturation currents are different.

Teacher's Note: Cut-off voltage identifies the material (through work function); saturation current identifies the intensity.

Exam Note: Same saturation gives same intensity; same cut-off gives same material.

Question 9. Plot a graph showing the variation of stopping potential with the frequency of incident radiation for two different photosensitive materials having work functions W1 and W2 (W1 > W2). On what factors does the (i) slope and (ii) intercept of the lines depend? [CBSE Delhi 2010]

Solution.

From eV0 = hν − W: V0 = (h/e)ν − W/e. The graph is a straight line for each material; the line for the larger work function W1 starts at a higher threshold frequency.

νVs1W₁/e2W₂/eν₀₂ν₀₁θW₁ > W₂; slope = tanθ = h/e for both

(i) Slope of the graph, tanθ = h/e, is a universal constant: it does not depend on the material or on the intensity.

(ii) The intercept on the stopping potential axis is −W/e, so the intercept depends on the work function of the material.

Teacher's Note: Slope h/e is the same for every metal, so the lines are parallel; only their intercepts differ.

Exam Note: Straight parallel lines; slope = h/e; intercept = −W/e.

Question 10. An electron is accelerated through a potential difference of 100 V. What is the de Broglie wavelength associated with it? To which part of the electromagnetic spectrum does this value of wavelength correspond? [CBSE Delhi 2010]

Solution.

λ = h/p = h/√(2meV) = (6.63 × 10−34)/√(2 × 9.1 × 10−31 × 1.6 × 10−19 × 100)

= 1.227 × 10−10 m = 1.227 Å.

This wavelength belongs to the X-ray region of the electromagnetic spectrum.

Teacher's Note: For electrons λ = 12.27/√V Å, so 100 V gives about 1.2 Å, comparable to X-ray wavelengths.

Exam Note: λ = h/√(2meV) = 1.227 Å; X-ray region.

Question 11. An electromagnetic wave of wavelength λ1 is incident on a photosensitive surface of negligible work function. If the photo-electrons emitted from this surface have the de-Broglie wavelength λ2, prove that λ1 = (2mc/h) λ22. [CBSE Delhi 2008]

Solution.

The work function is negligible, so the kinetic energy of the electrons equals the photon energy: Ek = hc/λ1.

de Broglie wavelength of the electrons: λ2 = h/√(2mEk), so λ22 = h2/(2mEk) = h2λ1/(2m·hc) = hλ1/(2mc).

Therefore λ1 = (2mc/h) λ22.

Teacher's Note: Zero work function means photon energy hc/λ₁ becomes electron kinetic energy; substitute into λ₂ = h/√(2mE).

Exam Note: Set E_k = hc/λ₁; substitute into λ₂ = h/√(2mE_k).

Question 12. The de Broglie wavelengths, associated with a proton and a neutron, are found to be equal. Which of the two has a higher value for kinetic energy?

Solution.

Equal de Broglie wavelengths mean equal momenta, p = h/λ. Kinetic energy K = p2/2m, so K ∝ 1/m.

Kp/Kn = mn/mp. The mass of the proton is slightly less than that of the neutron, so mn/mp is slightly greater than 1.

Hence the proton has the slightly higher kinetic energy.

Teacher's Note: With equal momentum, kinetic energy p²/2m is larger for the lighter particle, here the proton.

Exam Note: Equal λ gives equal p; K = p²/2m favours smaller mass.

Question 13. For a photosensitive surface, threshold wavelength is λ0. Does photoemission occur if the wavelength of radiation is (i) more than λ0 and (ii) less than λ0? Justify your answer.

Solution.

Energy of a photon E = hc/λ. For photoemission the photon energy must be at least the work function, i.e. hc/λ ≥ hc/λ0, or λ ≤ λ0.

(i) For λ > λ0, the photon energy is less than the work function: no photoemission.

(ii) For λ < λ0, the photon energy is greater than the work function: photoemission occurs.

Teacher's Note: Longer wavelength means smaller photon energy hc/λ; emission needs hc/λ at least equal to the work function.

Exam Note: Compare hc/λ with the work function hc/λ₀.

Question 14. Red light however bright it is, cannot produce the emission of electrons from a clean zinc surface, but even weak ultraviolet radiation can do so; why?

Solution.

Photoemission does not depend on the intensity but on the frequency, and hence on the energy of the photon of the incident light. If the photon energy is greater than the work function, photoemission occurs however weak the incident radiation may be.

The photon energy of red light is less than the work function of zinc, so red light cannot emit photoelectrons, however bright it is. The photon energy of ultraviolet light is greater than the work function of zinc, so ultraviolet light can emit photoelectrons.

Teacher's Note: Each electron absorbs a single photon, so brightness (photon number) cannot make up for too little photon energy.

Exam Note: One electron absorbs one photon; compare photon energy with work function.

Question 15. There are two sources of light A and B. The wavelength of light emitted from A is from 8000 Å to 11000 Å, while that from B is from 3000 Å to 6000 Å. The intensity of A is 4 times that of B. But when light of A falls on metal, photoelectrons are not emitted whereas light of B can eject photoelectrons from the same metal. Explain its reason.

Solution.

Photoelectrons are emitted from a metal surface only when the energy of the incident photons is equal to or more than the work function of the metal; in other words the wavelength of the incident light must be equal to or less than the threshold wavelength.

Here the threshold wavelength of the metal is less than 8000 Å. All photons of A (8000–11000 Å) have wavelengths longer than the threshold wavelength, so source A cannot eject photoelectrons, however high its intensity. The shorter wavelengths of B (3000–6000 Å) are below the threshold wavelength, so B can eject photoelectrons.

Teacher's Note: A’s photons all lack the work-function energy; higher intensity only adds more such photons.

Exam Note: Threshold wavelength is below 8000 Å.

Question 16. If the intensity of light falling on a metal plate is doubled, what will be the effect on photocurrent and maximum kinetic energy of emitted photoelectrons?

Solution.

The photocurrent is proportional to the intensity of the incident light (number of photons per second), so the photocurrent will be doubled.

The maximum kinetic energy of the photoelectrons does not depend on the intensity (Kmax = hν − φ0), so it remains unchanged.

Teacher's Note: Doubling intensity doubles the photons per second, hence the electrons per second, but not the energy per photon.

Exam Note: Current doubles; maximum kinetic energy unchanged.

Question 17. Work function of sodium is 2.3 eV. Does sodium show photoelectric emission for light of wavelength 6800 Å?

Solution.

Threshold wavelength of sodium: λ0 = hc/W = (6.6 × 10−34 × 3 × 108)/(2.3 × 1.6 × 10−19) = 5.38 × 10−7 m = 5380 Å.

The given wavelength λ = 6800 Å is greater than the threshold wavelength λ0 = 5380 Å, so no photoelectric emission will take place.

Teacher's Note: Compare the given wavelength with the threshold wavelength hc/W; longer means too little photon energy.

Exam Note: λ₀ = 5380 Å; 6800 Å exceeds it; no emission.

Question 18. An electron and a proton possess equal kinetic energy. Which of these has the greater de Broglie wavelength?

Solution.

de Broglie wavelength λ = h/√(2mEK). For a given kinetic energy, λ ∝ 1/√m.

λe/λp = √(mp/me). As mp > me, λe > λp, i.e. the de Broglie wavelength of the electron is greater (about 43 times).

Teacher's Note: At equal kinetic energy, λ varies as 1/√m, so the lighter electron wins by √1836 ≈ 43.

Exam Note: λ = h/√(2mE); smaller mass, longer wavelength.

Question 19. An electron and alpha particle have the same kinetic energy. How are the de Broglie wavelengths associated with them related?

Solution.

λ = h/√(2mEK), so for the same kinetic energy λ ∝ 1/√m.

λe/λα = √(mα/me) = √(4mp/me) ≈ √(4 × 1836) ≈ 86

So λe ≈ 86 λα; the electron’s wavelength is about 86 times that of the alpha particle.

Teacher's Note: The alpha particle is about 7300 times heavier than an electron, so its wavelength is √7300 ≈ 86 times smaller.

Exam Note: λ ∝ 1/√m gives λ_e ≈ 86 λ_α.

Question 20. An electron and photon have same energy 100 eV. Which has greater associated wavelength?

Solution.

Electron: λe = h/√(2mE), so E = h2/(2mλe2). Photon: E = hc/λph, so E2 = h2c2/λph2.

With the same E: λe/λph = √(E/2mc2). Since E = 100 eV is much less than 2mc2 ≈ 1 MeV, λe < λph.

Check: λe = 12.27/√100 Å = 1.227 Å, while λph = 12400/100 Å = 124 Å. The photon has the greater wavelength.

Teacher's Note: For the same energy, the photon (λ = hc/E) has far longer wavelength than a non-relativistic electron.

Exam Note: Compute 1.227 Å for electron and 124 Å for photon.

Question 21. By how much would the stopping potential for a given photosensitive surface go up if the frequency of the incident radiations were to be increased from 4 × 1015 Hz to 8 × 1015 Hz? Given h = 6.4 × 10−34 J-s, e = 1.6 × 10−19 C and c = 3 × 108 m s−1.

Solution.

eVS = hν − W ⇒ VS = (h/e)ν − W/e.

VS2 − VS1 = (h/e)(ν2 − ν1) = (6.4 × 10−34/1.6 × 10−19)(8 × 1015 − 4 × 1015) = 16 V.

Teacher's Note: The work function cancels when the two stopping potentials are subtracted, leaving (h/e)Δν.

Exam Note: Subtract the two equations: ΔV = (h/e)Δν = 16 V.

Question 22. Calculate the de Broglie wavelength of a neutron of kinetic energy 150 eV. Mass of neutron = 1.67 × 10−27 kg

Solution.

EK = 150 eV = 150 × 1.6 × 10−19 J = 2.4 × 10−17 J

λ = h/√(2mEK) = (6.63 × 10−34)/√(2 × 1.67 × 10−27 × 2.4 × 10−17) m ≈ 2.34 × 10−12 m = 0.0234 Å.

Teacher's Note: Use λ = h/√(2mE) with energy in joules; the heavy neutron gives a wavelength of only a few picometres.

Exam Note: Convert eV to J; λ = h/√(2mE) ≈ 0.0234 Å.

Question 23. There are two sources of light, each emitting with a power 100 W. One emits X-rays of wavelength 1 nm and the other visible light at 500 nm. Find the ratio of number of photons of X-rays to the photons of visible light of the given wavelength. [NCERT Exemplar]

Solution.

The total energy emitted per second is the same for both. Let n1 and n2 be the numbers of photons per second of X-rays and visible light.

n1E1 = n2E2 ⇒ n1(hc/λ1) = n2(hc/λ2)

n1/n2 = λ1/λ2 = 1 nm/500 nm = 1/500.

Teacher's Note: Equal power means number of photons is inversely proportional to photon energy, so proportional to wavelength.

Exam Note: Equate n₁hc/λ₁ = n₂hc/λ₂; ratio 1 : 500.

Question 24. Consider Fig. for photoemission. How would you reconcile with momentum-conservation? No light (Photons) have momentum in a different direction than the emitted electrons. [NCERT Exemplar]

Solution.

MetalLight (photon)Electron

The momentum is transferred to the metal. At the microscopic level, the atoms absorb the photon and its momentum is transferred mainly to the nucleus and electrons. The excited electron is emitted. Conservation of momentum has to account for the momentum transferred to the nucleus and electrons (the metal as a whole).

Teacher's Note: The emitted electron alone need not carry the photon’s momentum because the heavy lattice takes up the difference.

Exam Note: Momentum goes to the metal lattice; the total is conserved.

Question 25. Electrons are emitted from the surface when green light is incident on it, but no electrons are ejected when yellow light is incident on it. Do you expect electrons to be ejected when surface is exposed to (i) Red light and (ii) Blue light?

Solution.

Green light causes emission but yellow does not, so the threshold wavelength lies between those of green and yellow light.

(i) The wavelength of red light is longer than the threshold wavelength, hence no electron will be emitted with red light.

(ii) The wavelength of blue light is shorter than the threshold wavelength, hence electrons will be ejected.

Teacher's Note: Order the colours by wavelength: red and yellow are beyond the threshold; green and blue are inside it.

Exam Note: Threshold wavelength lies between green and yellow.

Question 26. Are matter waves electromagnetic?

Solution.

No. Matter waves are not electromagnetic. Electromagnetic waves are produced by accelerated charges, whereas matter waves (de Broglie waves) are associated with all moving particles, including neutral ones. In fact de Broglie waves are probability waves; they tell the probability of locating the particle in a certain region of space.

Teacher's Note: Matter waves exist for neutral particles too and describe probability, unlike electromagnetic waves from accelerated charges.

Exam Note: Not electromagnetic; they are probability waves.

Question 27. If the frequency of light falling on a metal is doubled, what will be the effect on photocurrent and the maximum kinetic energy of emitted photoelectrons?

Solution.

The photocurrent depends on the number of photons incident per second (intensity), not on the frequency, so (for the same number of photons per second) the photocurrent remains unchanged.

The maximum kinetic energy increases with frequency: EK = hν − W. If the frequency is doubled, EK′ = 2hν − W.

EK′/EK = (2hν − W)/(hν − W) = (2hν − 2W + W)/(hν − W) = 2 + W/(hν − W) > 2

So the maximum kinetic energy increases to slightly more than double.

Teacher's Note: K_max = hν − W is linear in ν with an offset, so doubling ν more than doubles K_max.

Exam Note: Current unchanged; K′ = 2hν − W exceeds 2K.

Question 28. X-rays of wavelength λ fall on a photosensitive surface, emitting electrons. Assuming that the work function of the surface can be neglected, prove that the de Broglie wavelength of electrons emitted will be √(hλ/2mc).

Solution.

Kinetic energy of the electrons Ek = energy of the X-ray photon = hc/λ (work function neglected).

de Broglie wavelength λB = h/√(2mEk) = h/√(2m·hc/λ) = √(h2λ/(2mhc)) = √(hλ/2mc).

Teacher's Note: Neglecting work function, the photon’s whole energy hc/λ becomes kinetic energy; then use λ_B = h/√(2mE).

Exam Note: Put E_k = hc/λ into λ_B = h/√(2mE_k).

Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Physics Chapter 11 Dual Nature Of Matter And Radiation Short Answer Questions I

Access Class 12 Mathematics Solutions

Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Physics Chapter 11 Dual Nature Of Matter And Radiation Short Answer Questions I. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Additional Study Materials for 2026

In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.