Solutions for Class 12 Physics: Chapter 10 Wave Optics
Review structured textbook solutions for Class 12 Physics Chapter 10 Wave Optics prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Practice Class 12 Physics Solutions: Chapter 10 Wave Optics
Access the complete solution PDF for Class 12 Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Short Answer Questions II
Question 1. Draw the diagrams to show the behaviour of plane wave fronts as they (a) pass through a thin prism, (b) pass through a thin convex lens and (c) reflect by a concave mirror. [CBSE Bhubaneshwar 2015]
Solution.
(a) Thin prism: the part of the wave front passing through the thicker (base) side is delayed more, so the emerging plane wave front is tilted towards the base.
(b) Thin convex lens: the central part of the plane wave front is delayed most (the lens is thickest there), so the emerging wave front becomes spherical and converges to the focus.
(c) Concave mirror: a plane wave front becomes spherical and convergent after reflection.
Teacher's Note: Wavefronts bend because different parts travel different optical paths; thicker glass delays the wavefront more.
Exam Note: Draw wavefront shapes before and after each device.
Question 2. What is the shape of the wave front in each of the following cases: (i) Light diverging from a point source (ii) Light emerging out of a convex lens when a point source is placed at its focus. (iii) The portion of a wave front of light from a distant star intercepted by the earth. [CBSE Delhi 2009]
Solution.
(i) The wave front is spherical, of increasing radius [fig. (a)].
(ii) The rays coming out of the convex lens, when the point source is at the focus, are parallel, so the wave front is plane [fig. (b)].
(iii) The wave front starting from the star is spherical. As the star is very far from the earth, the wave front intercepted by the earth is a very small portion of a sphere of very large radius, which is plane [fig. (c)].
Teacher's Note: A wavefront is perpendicular to the rays; parallel rays mean plane wavefronts, rays from a point mean spherical ones.
Exam Note: Name shape for each case and sketch it.
Question 3. Explain the following, giving reasons: (i) When monochromatic light is incident on a surface separating two media, the reflected and refracted light both have the same frequency as the incident frequency. (ii) When light travels from a rarer to a denser medium, the speed decreases. Does this decrease in speed imply a reduction in the energy carried by the wave? (iii) In the wave picture of light, intensity of light is determined by the square of the amplitude of the wave. What determines the intensity in the photon picture of light? [CBSE Central 2016]
Solution.
(i) Reflection and refraction arise through interaction of the incident light with the atomic constituents of matter, which vibrate (forced oscillations) with the same frequency as the incident light. Hence the frequency remains unchanged.
(ii) No. When light travels from a rarer to a denser medium its frequency remains unchanged. According to the quantum theory of light, the energy of a photon depends on frequency and not on speed.
(iii) For a given frequency, the intensity in the photon picture is determined by the number of photons incident normally on a unit area per unit time.
Teacher's Note: Frequency is fixed by the source; speed and wavelength change in a medium, but photon energy hν stays the same.
Exam Note: Frequency unchanged; energy depends on frequency; intensity means photons per second.
Question 4. Write the necessary conditions to obtain sustained interference fringes. (i) Also write the expression for the fringe width. (ii) In Young’s double slit experiment, plot a graph showing the variation of fringe width versus the distance of the screen from the plane of the slits keeping other parameters same. What information can one obtain from the slope of the curve? (iii) What is the effect on the fringe width if the distance between the slits is reduced keeping other parameters same? [CBSE Patna 2015]
Solution.
Conditions for sustained interference:
(a) The interfering sources must be coherent, i.e. they must have the same frequency and a constant initial phase difference.
(b) The interfering waves must have the same or nearly the same amplitude, so that there is good contrast between maxima and minima.
(i) Fringe width, β = λD/d, where D = distance between the slits and the screen, d = separation between the slits and λ = wavelength of light used.
(ii) Since β ∝ D, the graph of β against D is a straight line through the origin.
Slope = β/D = λ/d, so the wavelength can be found: λ = slope × d.
(iii) β ∝ 1/d. If the distance d between the slits is reduced, the fringe width increases.
Teacher's Note: Slope of the β–D line equals λ/d, so measuring it with known d gives the wavelength of the light.
Exam Note: Straight line through origin; slope = λ/d; reducing d widens fringes.
Question 5. For a single slit of width “a”, the first minimum of the interference pattern of a monochromatic light of wavelength λ occurs at an angle of λ/a. At the same angle of λ/a, we get a maximum for two narrow slits separated by a distance “a”. Explain. [CBSE Delhi 2014]
Solution.
Single slit: At angle θ = λ/a the wavelets from the two halves of the slit have a path difference of λ/2 for corresponding points (a sinθ/2 = λ/2). They cancel in pairs, so the overlapping contributions produce the first minimum.
Two narrow slits a apart: At the same angle the path difference between the waves from the two slits is a sinθ = λ. Waves from the two slits therefore arrive in phase and the first maximum is obtained.
Teacher's Note: One slit splits into two halves with path difference λ/2; two slits give a full path difference λ.
Exam Note: Compare path differences: λ/2 for halves, λ for slits.
Question 6. In the experiment on diffraction due to a single slit, show that (i) The intensity of diffraction fringes decreases as the order (n) increases. (ii) Angular width of the central maximum is twice that of the first order secondary maximum. [CBSE (F) 2011]
Solution.
(i) The intensity of the central maximum is due to constructive interference of wavelets from all parts of the slit. The first secondary maximum is due to the contribution of wavelets from one third part of the slit (wavelets from the remaining two parts interfere destructively), the second secondary maximum is due to the contribution from one fifth part only, and so on. So the intensity falls as n increases.
(ii) For the first minimum, a sinθ = λ, so θ = λ/a (small angle). With the screen at distance D, y₁ = λD/a on either side of the centre.
Angular width of the central maximum = 2λ/a.
Secondary maximum lies between the nth and (n + 1)th minima: θn = nλ/a and θn+1 = (n + 1)λ/a.
Angular width of a secondary maximum = (n + 1)λ/a − nλ/a = λ/a.
Hence the central maximum has twice the angular width of a secondary maximum.
Teacher's Note: Secondary maxima get weaker because fewer slit parts contribute: 1/3, 1/5, 1/7 of the slit.
Exam Note: Central width 2λ/a; secondary width λ/a; ratio 2.
Question 7. (i) Describe briefly, with the help of suitable diagram, how the transverse nature of light can be demonstrated by the phenomenon of polarisation of light. [CBSE (AI) 2014] (ii) When unpolarised light passes from air to a transparent medium, under what condition does the reflected light get polarised? [CBSE Delhi 2011]
Solution.
(i) Light from a source S is allowed to fall normally on the flat surface of a thin plate of a tourmaline crystal A, cut parallel to its axis. Only a part of this light is transmitted through A. If the plate A is rotated, the character of the transmitted light remains unchanged.
Now another similar plate B is placed at some distance from A such that the axis of B is parallel to that of A. If the light transmitted through A is passed through B, the light is almost completely transmitted through B and no change is observed.
If A is kept fixed and B is gradually rotated in its own plane, the intensity of light emerging from B decreases and becomes zero when the axis of B is perpendicular to that of A. On further rotation the intensity increases again and becomes maximum when the axes of A and B are again parallel.
Thus the intensity transmitted through B is maximum when the axes of A and B are parallel and zero when they are at right angles. This shows that light waves are transverse and not longitudinal; if they were longitudinal, rotating B would not change the intensity.
(ii) The reflected light is totally plane polarised when the reflected and refracted rays are perpendicular to each other (i.e. when the angle of incidence equals Brewster’s angle).
Teacher's Note: Only transverse vibrations can be blocked by a crystal axis; longitudinal waves would show no intensity change on rotation.
Exam Note: Draw A and B; maximum parallel, zero crossed; conclude transverse.
Question 8. (a) The light from a clear blue portion of the sky shows a rise and fall of intensity when viewed through a Polaroid which is rotated. Describe, with the help of a suitable diagram, the basic phenomenon/process which occurs to explain this observation. (b) Show how light reflected from a transparent medium gets polarised. Hence deduce Brewster’s law. OR An unpolarised light is incident on the boundary between two transparent media. State the condition when the reflected wave is totally plane polarised. Find out the expression for the angle of incidence in this case. [CBSE Delhi 2014, Bhubaneshwar 2015]
Solution.
(a) The Sun emits unpolarised light, represented by dots and double arrows. The dots stand for vibrations perpendicular to the plane of the paper and the double arrows for vibrations in the plane of the paper.
When the unpolarised light strikes the molecules of the atmosphere, the electrons in the molecules acquire components of motion in both directions. The charge accelerating parallel to the double arrow does not radiate energy towards the observer, so only the component of the electric field represented by dots radiates towards the observer. The scattered light is thus plane polarised, and when viewed through a Polaroid its intensity rises and falls as the Polaroid is rotated.
(b) Condition: the reflected ray is totally plane polarised when the reflected and refracted rays are perpendicular to each other (∠BOC = 90°). The angle of incidence in this case is called Brewster’s angle iB.
If r′ is the angle of reflection and r the angle of refraction, then by the law of reflection iB = r′, and from the figure r′ + 90° + r = 180°.
⇒ iB + r = 90° ⇒ r = 90° − iB
From Snell’s law, the refractive index of the second medium relative to the first (air) is n = sin iB / sin r = sin iB / sin(90° − iB) = sin iB / cos iB.
⇒ n = tan iB. This is Brewster’s law. Angle of incidence, iB = tan−1(n).
Teacher's Note: Air molecules scatter sunlight as polarised light; at Brewster’s angle reflected and refracted rays are 90° apart.
Exam Note: Draw both diagrams; derive n = tan iB.
Question 9. State Brewster’s law. The value of Brewster angle for a transparent medium is different for light of different colours. Give reason. [CBSE Delhi 2016]
Solution.
Brewster’s Law: When unpolarised light is incident on the surface separating two media at the polarising angle, the reflected light gets completely polarised only when the reflected light and the refracted light are perpendicular to each other. The refractive index of the denser (second) medium with respect to the rarer (first) medium is μ = tan iP, where iP = polarising angle.
Since the refractive index is different for different colours (wavelengths), Brewster’s angle is different for different colours.
Teacher's Note: Because μ = tan iB and μ varies with wavelength, each colour has its own polarising angle.
Exam Note: State μ = tan iB; reason: μ depends on wavelength.
Question 10. Explain why the intensity of light coming out of a Polaroid does not change irrespective of the orientation of the pass axis of the Polaroid. [CBSE East 2016]
Solution.
This is for unpolarised incident light. When unpolarised light passes through a polariser, the vibrations perpendicular to the pass axis are blocked. Unpolarised light has vibrations in all directions in the plane perpendicular to the direction of propagation. Hence if the polariser is rotated, the fraction of vibrations that are unblocked remains the same with reference to the axis of the polariser.
Hence for all positions of the Polaroid, half of the incident light is transmitted and the intensity of the emergent light does not change.
Teacher's Note: Unpolarised light has no preferred direction, so every orientation of the pass axis transmits half the intensity.
Exam Note: Unpolarised: all directions equal; half transmitted for any orientation.
Question 11. (i) Light passes through two Polaroids P1 and P2 with axis of P2 making an angle θ with the pass axis of P1. For what value of θ is the intensity of emergent light zero? (ii) A third Polaroid is placed between P1 and P2 with its pass axis making an angle β with the pass axis of P1. Find a value of β for which the intensity of light emerging from P2 is I0/8, where I0 is the intensity of light on the Polaroid P1. [CBSE (F) 2011]
Solution.
(i) Zero intensity is obtained when the pass axes are perpendicular, i.e. at θ = 90°.
(ii) Here P1 and P2 are crossed (θ = 90°) and the third Polaroid P3 makes angle β with P1, hence 90° − β with P2.
Intensity from P1 = I0/2
Intensity from P3 = (I0/2) cos2β
Intensity from P2 = (I0/2) cos2β cos2(90° − β) = (I0/2) cos2β sin2β = (I0/8) sin22β
Given I = I0/8, so sin22β = 1 ⇒ sin 2β = 1 ⇒ 2β = 90° ⇒ β = 45° (π/4).
Teacher's Note: Between crossed Polaroids the transmitted intensity is (I₀/8)sin²2β, reaching its maximum I₀/8 when β is 45°.
Exam Note: Apply Malus’ law twice; use sin²2β.
Question 12. Draw the intensity distribution for (i) the fringes produced in interference, and (ii) the diffraction bands produced due to single slit. Write two points of difference between the phenomena of interference and diffraction. [CBSE (F) 2017]
Solution.
(a) Interference pattern (I against phase difference φ) (b) Diffraction pattern (I against angle θ)
| Interference | Diffraction |
|---|---|
| (i) It is due to the superposition of two waves coming from two coherent sources. | (i) It is due to the superposition of secondary wavelets originating from different parts of the same wavefront. |
| (ii) The width of the interference bands is equal. | (ii) The width of the diffraction bands is not the same. |
| (iii) The intensity of all maxima (fringes) is the same. | (iii) The intensity of the central maximum is maximum and goes on decreasing rapidly with increase in order of maxima. |
Teacher's Note: Interference maxima are equally bright and equally wide; the single-slit central maximum is brightest and twice as wide.
Exam Note: Two graphs, two differences from the table.
Question 13. How does the refractive index of a transparent medium depend on the wavelength of incident light used? Velocity of light in glass is 2 × 108 m/s and in air is 3 × 108 m/s. If the ray of light passes from glass to air, calculate the critical angle. [CBSE (F) 2015]
Solution.
The refractive index of a transparent medium decreases with increase in the wavelength of the incident light.
Refractive index of glass with respect to air: μ = (speed of light in air)/(speed of light in glass) = (3 × 108)/(2 × 108) = 1.5
sin ic = 1/μ = 1/1.5 = 2/3
ic = sin−1(2/3) ≈ 41.8°
Teacher's Note: μ falls as wavelength rises (Cauchy’s relation); critical angle follows from sin ic = 1/μ with μ = c/v.
Exam Note: Compute μ = 1.5, then sin ic = 2/3.
Question 14. Use Huygen’s principle to explain the formation of diffraction pattern due to a single slit illuminated by a monochromatic source of light. When the width of slit is made double the original width, how this affect the size and intensity of the central diffraction band? [CBSE Delhi 2012]
Solution.
According to Huygens’ principle, the net effect at any point due to a number of wavelets is the sum of the contributions of all the wavelets with proper phase differences. Every point of the slit AB acts as a source of secondary wavelets.
Central point C: the wavelets from all points of the slit reach C with zero path difference, i.e. in phase, so C is the central maximum.
Point P at angle θ: the path difference between the extreme wavelets is BN = a sinθ.
(i) If a sinθ = nλ (n = 1, 2, 3, …), the slit can be divided into 2n equal parts whose wavelets cancel in pairs, so P is a minimum.
(ii) If a sinθ = (n + ½)λ, P is a maximum, but of decreasing intensity as n increases.
The width of the central maximum = 2λD/a.
Slit width doubled: the size (width) of the central maximum is reduced to half, and its intensity becomes four times.
Teacher's Note: Central maximum width is 2λD/a, so doubling a halves it; the amplitude doubles, so intensity quadruples.
Exam Note: Define path difference a sinθ; minima nλ; width 2λD/a.
Question 15. (a) In Young’s double slit experiment, two slits are 1 mm apart and the screen is placed 1 m away from the slits. Calculate the fringe width when light of wavelength 500 nm is used. (b) What should be the width of each slit in order to obtain 10 maxima of the double slits pattern within the central maximum of the single slit pattern? [CBSE East 2016]
Solution.
(a) Fringe width β = λD/d = (500 × 10−9 × 1)/(1 × 10−3) = 5 × 10−4 m = 0.5 mm.
(b) The width of the central maximum of the single slit pattern is 2λD/a. For 10 double-slit fringes within it:
2λD/a = 10β ⇒ a = (2 × 500 × 10−9 × 1)/(10 × 5 × 10−4) = 2 × 10−4 m = 0.2 mm.
Teacher's Note: Fit ten fringes of width λD/d inside the single-slit central maximum 2λD/a; this gives a = d/5.
Exam Note: Use β = λD/d, then 2λD/a = 10β.
Question 16. A beam of light consisting of two wavelengths, 800 nm and 600 nm is used to obtain the interference fringes in a Young’s double slit experiment on a screen placed 1.4 m away. If the two slits are separated by 0.28 mm, calculate the least distance from the central bright maximum where the bright fringes of the two wavelengths coincide. [CBSE (AI) 2012]
Solution.
Given λ1 = 800 nm = 800 × 10−9 m, λ2 = 600 nm = 600 × 10−9 m, D = 1.4 m, d = 0.28 mm = 0.28 × 10−3 m.
For the least distance of coincidence, the order of the longer wavelength is one less than that of the shorter wavelength. As λ1 > λ2, n1 < n2. Let n1 = n and n2 = n + 1.
Bright fringes coincide when nDλ1/d = (n + 1)Dλ2/d ⇒ nλ1 = (n + 1)λ2
800n = 600(n + 1) ⇒ 200n = 600 ⇒ n = 3
ymin = nDλ1/d = (3 × 1.4 × 800 × 10−9)/(0.28 × 10−3) = 12 × 10−3 m = 12 mm.
Teacher's Note: Coincidence needs n·800 = (n+1)·600, so the 3rd bright fringe of 800 nm meets the 4th of 600 nm.
Exam Note: Equate positions; n = 3; y = 12 mm.
Question 17. (i) Assume that the light of wavelength 6000 Å is coming from a star. Find the limit of resolution of a telescope whose objective has a diameter of 250 cm. (ii) Two slits are made 1 mm apart and the screen is placed 1 m away. What should be the width of each slit to obtain 10 maxima of the double slit pattern within the central maximum of the single slit pattern? [CBSE Guwahati 2015]
Solution.
(i) Limit of resolution Δθ = 1.22λ/D, with D = 250 cm = 2.5 m and λ = 6000 Å = 6 × 10−7 m.
Δθ = (1.22 × 6 × 10−7)/2.5 = 2.9 × 10−7 radian.
(ii) If a is the width of each slit, the first minimum of the single slit pattern is at θ = λ/a, so the angular width of the central maximum is θ′ = 2λ/a.
The angular fringe width of the interference pattern is α = β/D = λ/d.
For 10 maxima within the central maximum: 10α = θ′ ⇒ 10(λ/d) = 2λ/a ⇒ a = d/5.
With d = 1 mm, a = (1/5) mm = 0.2 mm.
Teacher's Note: Telescope resolution depends on 1.22λ/D; the slit result a = d/5 comes from 10λ/d = 2λ/a.
Exam Note: Use 1.22λ/D; equate 10λ/d to 2λ/a.
Question 18. (i) Why are coherent sources necessary to produce a sustained interference pattern? (ii) In Young’s double slit experiment using monochromatic light of wavelength λ, the intensity of light at a point on the screen where path difference is λ, is K units. Find out the intensity of light at a point where path difference is λ/3. [CBSE Delhi 2012]
Solution.
(i) Coherent sources are needed to ensure that the positions of maxima and minima do not change with time. If the phase difference between the waves reaching a point changes with time, the intensity there will change and a sustained interference pattern will not be obtained.
(ii) I = 4I0 cos2(φ/2), where I0 is the intensity of each wave.
Path difference λ gives phase difference φ = 2π, so K = 4I0 cos2π = 4I0.
Path difference λ/3 gives phase difference φ = 2π/3, so I′ = 4I0 cos2(π/3) = 4I0 × ¼ = I0.
Hence I′ = K/4.
Teacher's Note: Phase difference = 2π × path difference / λ; the intensity formula 4I₀cos²(φ/2) then links K and I′.
Exam Note: Convert path to phase; compare with K = 4I₀.
Question 19. Distinguish between polarised and unpolarised light. Does the intensity of polarised light emitted by a Polaroid depend on its orientation? Explain briefly. The vibrations in a beam of polarised light make an angle of 60° with the axis of the Polaroid sheet. What percentage of light is transmitted through the sheet? [CBSE (F) 2016]
Solution.
Unpolarised light has vibrations in all directions in a plane perpendicular to the direction of propagation. Light from the sun, an incandescent bulb or a candle is unpolarised.
Polarised light: the electric field vector vibrates in just one direction perpendicular to the direction of wave propagation (linearly polarised light).
Yes, when polarised light is incident on a Polaroid, the transmitted intensity depends on the orientation of the Polaroid: it varies as the square of the cosine of the angle between the direction of vibration of the light and the pass axis of the Polaroid (Malus’ law), I = I0 cos2θ, where I0 is the maximum transmitted intensity.
For θ = 60°: I = I0 cos260° = I0/4, so the percentage transmitted = (I/I0) × 100 = 25%.
Teacher's Note: Malus’ law I = I₀cos²θ applies to already polarised light; at 60° the factor is cos²60° = 1/4.
Exam Note: Define both; state Malus’ law; answer 25%.
Question 20. Find an expression for intensity of transmitted light when a Polaroid sheet is rotated between two crossed Polaroids. In which position of the Polaroid sheet will the transmitted intensity be maximum? [CBSE Delhi 2015]
Solution.
Let P1 and P2 be the crossed Polaroids (no light passes through P2), and let I0 be the intensity of the polarised light transmitted by P1. A third Polaroid P3 is inserted between them with its axis at angle θ to that of P1.
Intensity transmitted by P3: I3 = I0 cos2θ …(1)
The axis of P3 makes angle (90° − θ) with that of P2, so I2 = I3 cos2(90° − θ) …(2)
From (1) and (2): I2 = I0 cos2θ sin2θ = (I0/4)(2 sinθ cosθ)2 = (I0/4) sin22θ
I2 is maximum when sin 2θ = ±1, i.e. 2θ = 90° ⇒ θ = 45°. So the transmitted intensity is maximum when P3 is at 45° to each of P1 and P2, and the maximum value is I0/4.
Teacher's Note: Two Malus’ law steps give I₀/4 times sin²2θ, so the middle sheet at 45° passes the most.
Exam Note: Derive (I₀/4)sin²2θ; maximum at 45°.
Question 21. Two wavelengths of sodium light 590 nm and 596 nm are used, in turn, to study the diffraction taking place at a single slit of aperture 2 × 10−4 m. The distance between the slit and the screen is 1.5 m. Calculate the separation between the positions of the first maxima of the diffraction pattern obtained in the two cases. [CBSE Delhi 2013]
Solution.
For secondary maxima: a sinθ = (n + ½)λ with θ ≈ y/D, so a·y/D = (n + ½)λ. For the first maximum n = 1, so y = 3λD/(2a).
For λ1 = 590 nm: y1 = (3/2) × (590 × 10−9 × 1.5)/(2 × 10−4) = 6.64 × 10−3 m = 6.64 mm.
For λ2 = 596 nm: y2 = (3/2) × (596 × 10−9 × 1.5)/(2 × 10−4) = 6.705 × 10−3 m = 6.705 mm.
Separation between the positions of the first maxima: Δy = y2 − y1 = 3(596 − 590) × 10−9 × 1.5/(2 × 2 × 10−4) = 6.75 × 10−5 m ≈ 0.0675 mm (about 0.07 mm).
Teacher's Note: Position of the first secondary maximum is 3λD/2a, so the separation depends only on the 6 nm wavelength difference.
Exam Note: Use y = 3λD/2a for each; subtract.
Question 22. (i) State law of Malus. (ii) Draw a graph showing the variation of intensity (I) of polarised light transmitted by an analyser with angle (θ) between polariser and analyser. (iii) What is the value of refractive index of a medium of polarising angle 60°? [CBSE Central 2016]
Solution.
(i) Malus’ law states that when the pass axis of a Polaroid makes an angle θ with the plane of polarisation of polarised light of intensity I0 incident on it, the intensity of the transmitted light is I = I0 cos2θ.
(ii) Graph of I against θ:
(iii) μ = tan iB = tan 60° = √3 ≈ 1.73.
Teacher's Note: Intensity varies as cos²θ, with maxima I₀ at 0 and π and zeros at π/2 and 3π/2.
Exam Note: State I = I₀cos²θ; sketch; μ = tan 60°.
Question 23. The intensity at the central maxima (O) in a Young’s double slit experiment is I0. If the distance OP equals one-third of the fringe width of the pattern, show that the intensity at point P would be I0/4. [CBSE (F) 2011, 2012]
Solution.
Fringe width β = λD/d, so OP = y = β/3 = λD/(3d).
Path difference at P: Δx = yd/D = (λD/3d)(d/D) = λ/3.
Phase difference: Δφ = (2π/λ)Δx = (2π/λ)(λ/3) = 2π/3.
Intensity at P: I = I0 cos2(Δφ/2) = I0 cos2(π/3) = I0 (1/2)2 = I0/4. Here I0 is the central maximum intensity (4 times that of a single wave).
Teacher's Note: Moving β/3 from the centre gives path difference λ/3 and phase 2π/3, where cos²(π/3) = 1/4.
Exam Note: Find path difference λ/3; use I = I₀cos²(φ/2).
Question 24. In Young’s double slit experiment, explain with reason in each case, how the interference pattern changes, when (i) Width of the slits is doubled (ii) Separation between the slits is increased and (iii) Screen is moved away from the plane of slits.
Solution.
Fringe width β = Dλ/d.
(i) When the width of the slits is doubled, more light passes through each slit, so the intensity of the maxima increases and the fringes become brighter. The fringe width β = Dλ/d does not depend on slit width, so it is unchanged.
(ii) When the separation between the slits is increased, the fringe width decreases (β ∝ 1/d), i.e. the fringes come closer.
(iii) β ∝ D. When the screen is moved away from the plane of the slits, the fringe width increases, i.e. the fringes move farther apart.
Teacher's Note: Only d, D and λ fix fringe spacing; slit width only changes how bright the fringes are.
Exam Note: Use β = Dλ/d for each case.
Question 25. What are coherent sources of light? Why are coherent sources required to produce interference of light? Give an example of interference in everyday life.
Solution.
Coherent sources: two sources giving light waves of the same frequency and zero or constant initial phase difference.
Necessity: The intensity at any point in the region of superposition is I = a12 + a22 + 2a1a2 cos φ.
If the sources are not coherent, the phase difference φ at any point changes randomly with time and the time-averaged value of cos φ is zero. The average intensity is then I = a12 + a22, the sum of the individual intensities. There is no modification of intensity in the region of superposition, and hence no interference is observed.
Example from daily life: bubbles of colourless soap solution appear coloured in white light. This is due to interference of white light reflected from the upper and lower surfaces of the soap film; the colours seen are those which satisfy the condition of maxima in reflected light.
Teacher's Note: Random phase makes the cross term 2a₁a₂cosφ average to zero, leaving plain addition of intensities.
Exam Note: Define; show cross term averages out; give soap film.
Question 26. Define resolving power of a compound microscope. How does the resolving power of a compound microscope change when (i) Refractive index of medium between the object and objective lens increases. (ii) Wavelength of radiation used is increased?
Solution.
Resolving power of a microscope is its ability to form separate images of two close objects placed near it. The minimum distance between two objects for which the microscope can just form separate images is called the limit of resolution; the smaller the limit, the larger the resolving power.
Limit of resolution: dmin = 1.22λ/(2n sinβ) ≈ λ/(2n sinβ), where n is the refractive index of the medium between the object and the objective.
Resolving power = 1/dmin = 2n sinβ/(1.22λ)
(i) Resolving power ∝ n; therefore it increases when the refractive index of the medium between object and objective increases.
(ii) Resolving power ∝ 1/λ; therefore it decreases when the wavelength of the light used is increased.
Teacher's Note: Resolving power is 1/d_min: an oil-immersion medium (large n) or shorter wavelength lets the microscope separate closer objects.
Exam Note: Give formula; R.P. ∝ n and ∝ 1/λ.
Question 27. Two identical coherent waves, each of intensity I, are producing an interference pattern. Find the value of the resultant intensity at a point of (i) constructive interference and (ii) destructive interference.
Solution.
Resultant intensity at a point of phase difference φ: IR = I1 + I2 + 2√(I1I2) cos φ.
Here I1 = I2 = I, so IR = 2I + 2I cos φ.
(i) Constructive interference: φ = 2nπ (n = 0, 1, 2, …), cos φ = 1, so Imax = 2I + 2I = 4I.
(ii) Destructive interference: φ = (2n + 1)π, cos φ = −1, so Imin = 2I − 2I = 0.
Teacher's Note: Equal intensities make the cross term 2I·cosφ: 4I when cosφ = 1, zero when cosφ = −1.
Exam Note: I_R = 2I(1 + cosφ); give 4I and 0.
Question 28. Two Polaroids are placed 90° to each other and the transmitted intensity is zero. What happens when one more Polaroid is placed between these two bisecting the angle between them. Take intensity of unpolarised light I0. How will the intensity of transmitted light vary on further rotating the third Polaroid?
Solution.
Let unpolarised light of intensity I0 fall on the first Polaroid A. The transmitted intensity is I0/2.
With A and B at 90°, Malus’ law gives I = (I0/2) cos290° = 0.
When a third Polaroid C is placed between A and B making 45° with each: intensity from C = (I0/2) cos245° = I0/4, and intensity from B = (I0/4) cos245° = I0/8.
So light now emerges, with intensity I0/8, which is one-fourth of the intensity transmitted by the first Polaroid (I0/2).
On further rotating C, if its angle θ with A moves away from 45° the transmitted intensity, (I0/8) sin22θ, decreases (to zero at 0° and 90°); it is maximum at 45°.
Teacher's Note: The middle Polaroid lets light through by rotating polarisation in two steps, giving (I₀/8)sin²2θ.
Exam Note: Apply Malus’ law twice; I₀/8 at 45°.
Question 29. Consider a two slit interference arrangement such that the distance of the screen from the slits is half the distance between the slits. Obtain the value of D in terms of λ such that the first minima on the screen fall at a distance D from the centre O. [CBSE Sample Paper 2017]
Solution.
Here CO = D, S1C = CS2 = D, so the slit separation is 2D. The first minimum is at P with OP = x = D.
Distances from the slits to P: S1P = √[D2 + (D − x)2], S2P = √[D2 + (D + x)2].
For the first minimum the path difference is λ/2: √[D2 + (D + x)2] − √[D2 + (D − x)2] = λ/2
Put x = D: √(D2 + 4D2) − D = λ/2 ⇒ D(√5 − 1) = λ/2
⇒ D = λ/[2(√5 − 1)] ≈ 0.40λ.
Teacher's Note: Exact path difference S₂P − S₁P is used because the small-angle formula fails at this large angle.
Exam Note: Set path difference λ/2 with x = D.
Question 30. Define the term ‘resolving power’ of an astronomical telescope. How does it get affected on (i) Increasing the aperture of the objective lens? (ii) Increasing the wavelength of light used? (iii) Increasing the focal length of the objective lens? Justify your answer in each case.
Solution.
Resolving power of an astronomical telescope is its ability to form separate images of two neighbouring astronomical objects (e.g. stars). The least angular separation between two objects for which it can form separate images is called the limit of resolution (resolving limit). The smaller the resolving limit, the greater the resolving power.
Angular limit of resolution: θmin = 1.22λ/d, where λ is the wavelength and d is the diameter of the aperture of the objective lens. Resolving power = d/(1.22λ).
(i) R.P. ∝ d, so increasing the aperture of the objective increases the resolving power.
(ii) R.P. ∝ 1/λ, so increasing the wavelength decreases the resolving power.
(iii) The resolving power does not depend on the focal length of the objective, so there is no effect.
Teacher's Note: Telescope resolution is set by aperture and wavelength only; focal length changes image size, not resolving power.
Exam Note: R.P. = d/1.22λ; focal length has no effect.
Free study material for Physics
Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Physics Chapter 10 Wave Optics Short Answer Questions II
Access Class 12 Mathematics Solutions
Access the complete chapter-wise PDF for Xam Idea Solutions Class 12 Physics Chapter 10 Wave Optics Short Answer Questions II. These structured Xam Idea Solutions solutions for Class 12 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Step-by-Step Mathematical Explanations
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Next Steps in Your Mathematics Revision
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.