Xam Idea Solutions Class 12 Physics Chapter 10 Wave Optics Long Answer Questions

Official Textbook Solutions: Class 12 Physics Chapter 10 Wave Optics

Review structured textbook solutions for Class 12 Physics Chapter 10 Wave Optics prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Physics: Chapter 10 Wave Optics

Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Long Answer Questions

Question 1. Using Huygens’ Principle, draw a diagram to show propagation of a wavefront originating from a monochromatic point source. Explain briefly.

Solution.

Huygens’ Principle is useful for determining the position of a given wavefront at any time in the future if we know its present position. It states:

(i) Every point on a given wavefront may be regarded as a source of new disturbance.

(ii) The new disturbances from each point spread out in all directions with the velocity of light and are called secondary wavelets.

(iii) The surface of tangency to the secondary wavelets in the forward direction at any instant gives the new position of the wavefront at that time.

Construction: Let AB be the section of a wavefront from the point source S in a homogeneous isotropic medium at t = 0, and v the velocity of light in the medium.

(a) Take a number of points 1, 2, 3, … on the wavefront AB. These are the sources of secondary wavelets.

(b) At time t the radius of each secondary wavelet is vt. Taking each point as centre, draw circles of radius vt.

(c) Draw a tangent A1B1 common to all these circles in the forward direction. This gives the position of the new wavefront at time t.

SAA₁B₁A₂B₂BWavelets of radius vt; forward envelope A₁B₁ is the new wavefrontray

The Huygens’ construction also gives a backward wavefront A2B2 (dashed), which is contrary to observation. The difficulty is removed by assuming that the intensity of the spherical wavelets is not uniform in all directions; it varies continuously from a maximum in the forward direction to zero in the backward direction.

The directions normal to the wavefront are called rays, i.e. a ray is the direction in which the disturbance is propagated.

Teacher's Note: Each wavefront point emits wavelets of radius vt; their forward tangent is the new spherical wavefront.

Exam Note: State the three parts; draw wavelets and tangent A₁B₁.

Question 2. How is a wave front defined? Using Huygen’s construction draw a figure showing the propagation of a plane wave reflecting at the interface of the two media. Show that the angle of incidence is equal to angle of reflection. [CBSE Delhi 2008]

Solution.

Wave front: a locus of all particles of the medium vibrating in the same phase.

Law of reflection: Let XY be a reflecting surface on which a plane wave front AB is incident obliquely. Let v be the speed of the wave front and at time t = 0 the wave front touch the surface at A. After time t, the point B of the wave front reaches the point B′ of the surface, so BB′ = vt.

According to Huygens’ principle each point of the wavefront acts as a source of secondary waves. The secondary wavelet from A spreads in the first medium with speed v and in time t traverses AA′ = vt. In the same time the point B reaches B′, from where the secondary wavelet now starts. Taking A as centre, draw an arc of radius AA′ = vt and draw the tangent A′B′ to it from B′. The wavelets from points between A and B′ also touch A′B′, so A′B′ is the reflected wavefront.

AB′BA′Incident wavefrontReflected wavefrontReflecting surface XYir

In right-angled triangles ABB′ and AA′B′: ∠ABB′ = ∠AA′B′ = 90°, BB′ = AA′ (= vt) and AB′ is common. So the triangles are congruent and ∠BAB′ = ∠AB′A′.

The incident wavefront AB and the reflected wavefront A′B′ therefore make equal angles with the reflecting surface. Rays are normal to wavefronts, so the incident and reflected rays make equal angles with the normal to XY: angle of incidence i = angle of reflection r. This is the second law of reflection.

Since AB, A′B′ and XY all lie in the plane of the paper, the normals also lie in that plane, i.e. the incident ray, reflected ray and normal lie in the same plane (first law of reflection).

Teacher's Note: Congruent triangles ABB′ and AA′B′ (common hypotenuse, BB′ = AA′ = vt) give equal angles of incidence and reflection.

Exam Note: Draw Huygens figure; prove triangles congruent; state both laws.

Question 3. (a) How is a wave front defined? Distinguish between a plane wave front and a spherical wave front. Using Huygens’s constructions draw a figure showing the propagation of a plane wave refracting at a plane surface separating two media. Hence verify Snell’s law of refraction. When a light wave travels from rarer to denser medium, the speed decreases. Does it imply reduction its energy? Explain. [CBSE Delhi 2008, 2013, (F) 2011, 2012] (b) When monochromatic light travels from a rarer to a denser medium, explain the following, giving reasons: (i) Is the frequency of reflected and refracted light same as the frequency of incident light? (ii) Does the decrease in speed imply a reduction in the energy carried by light wave? [CBSE Delhi 2013] OR A plane wave front propagating in a medium of refractive index μ1 is incident on a plane surface making the angle of incidence i. It enters into a medium of refractive index μ2 (μ2 > μ1). Use Huygens’ construction of secondary wavelets to trace the propagation of the refracted wave front. Hence verify Snell’s law of refraction. [CBSE (F) 2015]

Solution.

Wave front: a locus of all particles of the medium vibrating in the same phase. A spherical wave front is produced by a point source (rays diverge from a point); a plane wave front is produced by a very distant source or a source at the focus of a lens (rays are parallel).

Proof of Snell’s law: When a wave passes from one homogeneous medium to another its frequency remains unchanged but its speed and wavelength change. Let XY be the surface separating media 1 and 2, and v1, v2 the speeds of the wave in them (v2 < v1).

A plane wave front AB in medium 1 is incident obliquely on XY. At t = 0 its end A touches the surface; after time t the end B reaches B′, so BB′ = v1t. The secondary wavelet from A travels AA′ = v2t in medium 2 in the same time.

Taking A as centre, draw an arc of radius AA′ = v2t and draw the tangent B′A′ from B′. The wavelets from points between A and B′ also touch B′A′, so B′A′ is the refracted wave front.

AB′BA′Incident wavefrontRefracted wavefrontMedium 1: rarer, speed v₁Medium 2: denser, speed v₂ < v₁ir

First law: AB, A′B′ and XY lie in the plane of the paper, so the normals to them (the rays and the normal to the surface) lie in the same plane: the incident ray, refracted ray and normal are coplanar.

Second law: Let the incident and refracted wave fronts make angles i and r with XY; these are the angles of incidence and refraction. In right-angled triangle AB′B, sin i = BB′/AB′ = v1t/AB′. In right-angled triangle AA′B′, sin r = AA′/AB′ = v2t/AB′.

Dividing: sin i / sin r = v1/v2 = constant (= μ2/μ1 = refractive index of medium 2 with respect to medium 1). This is Snell’s law.

(b) (i) Yes. When radiation interacts with the atoms or molecules of matter, they vibrate (forced oscillations) with the same frequency as the incident radiation. So the frequency of the scattered light (reflected and refracted) equals that of the incident light.

(ii) No. The energy carried by a wave depends on its frequency (E = hν for a photon) and not on its speed, so the decrease in speed does not reduce the energy.

Teacher's Note: In equal time BB′ = v₁t and AA′ = v₂t, so sin i/sin r = v₁/v₂ = μ₂/μ₁.

Exam Note: Draw refraction construction; derive sin i/sin r = v₁/v₂.

Question 4. Use Huygens’ Principle to show how a plane wave front propagates from a denser to rarer medium. Hence, verify Snell’s law of refraction. [CBSE Allahabad 2015, Sample Paper 2016]

Solution.

Assume a plane wave front AB propagating in the denser medium I is incident on the interface PP′ at angle i. Let τ be the time taken by the wave front to travel the distance BC. If v1 is the speed of light in medium I, then BC = v1τ.

To find the shape of the refracted wave front, draw a sphere (arc) of radius AE = v2τ about A, where v2 is the speed of light in medium II (rarer medium, so v2 > v1). The tangent plane CE drawn from C represents the refracted wave front.

AB′BA′Incident wavefrontRefracted wavefrontMedium 1: denser, speed v₁Medium 2: rarer, speed v₂ > v₁ir

In right-angled triangle ABC: sin i = BC/AC = v1τ/AC.

In right-angled triangle AEC: sin r = AE/AC = v2τ/AC.

Therefore sin i / sin r = v1/v2 = constant. This is Snell’s law. Since v2 > v1, sin r > sin i, i.e. r > i: the ray bends away from the normal on going from the denser to the rarer medium. If sin i = v1/v2, then r = 90°; this value of i is the critical angle.

Teacher's Note: Wavelets travel farther in the rarer medium in the same time, so r becomes greater than i.

Exam Note: Draw construction; sin i = v₁τ/AC, sin r = v₂τ/AC.

Question 5. (i) In Young’s double slit experiment, deduce the conditions for constructive and destructive interference at a point on the screen. Draw a graph showing variation of the resultant intensity in the interference pattern against position ‘x’ on the screen. [CBSE Delhi 2016, (AI) 2012] (ii) Compare and contrast the pattern which is seen with two coherently illuminated narrow slits in Young’s experiment with that seen for a coherently illuminated single slit producing diffraction.

Solution.

(i) Interference is the redistribution of intensity produced by the superposition of two waves of the same frequency and constant initial phase difference (coherent waves). At points where the waves arrive in phase, the resultant intensity is maximum (constructive interference); where they arrive in opposite phase it is minimum (destructive interference).

Mathematical analysis: Let two coherent waves have the same frequency ω/2π and amplitudes a1 and a2, with phase difference φ at a point:

y1 = a1 sin ωt,   y2 = a2 sin(ωt + φ)

By the principle of superposition, y = y1 + y2 = (a1 + a2 cos φ) sin ωt + (a2 sin φ) cos ωt

Put a1 + a2 cos φ = A cos θ and a2 sin φ = A sin θ. Then y = A sin(ωt + θ).

Squaring and adding: A2 = (a1 + a2 cos φ)2 + (a2 sin φ)2 = a12 + a22 + 2a1a2 cos φ

Intensity is proportional to the square of the amplitude, so I = a12 + a22 + 2a1a2 cos φ …(i)

Constructive interference: cos φ = +1, so φ = 0, 2π, 4π, … = 2nπ (n = 0, 1, 2, …). Path difference = nλ. Imax = (a1 + a2)2.

Destructive interference: cos φ = −1, so φ = π, 3π, 5π, … = (2n − 1)π (n = 1, 2, 3, …). Path difference = (2n − 1)λ/2. Imin = (a1 − a2)2.

In Young’s experiment with slit separation d, screen distance D and a point at distance x from the centre, the path difference is xd/D. Bright fringes are at x = nλD/d and dark fringes at x = (2n − 1)λD/2d. For equal amplitudes a, Imax = 4a2 and Imin = 0. Variation of intensity with x:

Ix4I₀−2β−β0β2βbright fringes at x = nβ, dark fringes midway; β = λD/d

(ii) Comparison of the double-slit and single-slit patterns:

Young’s double slit (interference)Single slit (diffraction)
Bright fringes are of equal width.The central maximum is twice as wide as the other maxima.
All bright fringes have (nearly) the same intensity.Intensity falls rapidly for the secondary maxima; the central maximum is the brightest.
Due to superposition of waves from two coherent sources (slits).Due to superposition of wavelets from different parts of the same slit.
Dark fringes are (nearly) completely dark.The minima are not completely dark for a wide slit.

Both patterns consist of alternate bright and dark bands formed by the redistribution of light intensity.

Teacher's Note: Intensity I = a₁² + a₂² + 2a₁a₂cosφ; maxima at path nλ, minima at odd multiples of λ/2.

Exam Note: Derive intensity; give both conditions; sketch I against x.

Question 6. Two harmonic waves of monochromatic light y1 = a cos ωt and y2 = a cos(ωt + φ) are superimposed on each other. Show that maximum intensity in interference pattern is four times the intensity due to each slit. Hence write the conditions for constructive and destructive interference in terms of the phase angle φ. [CBSE South 2016]

Solution.

The resultant displacement is y = y1 + y2 = a cos ωt + a cos(ωt + φ) = a[cos ωt + cos(ωt + φ)] = 2a cos(φ/2) cos(ωt + φ/2).

The amplitude of the resultant displacement is 2a cos(φ/2).

Intensity is proportional to the square of the amplitude, so the resultant intensity is I = k(2a cos(φ/2))2 = 4ka2 cos2(φ/2) = 4I0 cos2(φ/2), where I0 = ka2 is the intensity due to each wave (slit).

The maximum value of cos2(φ/2) is 1, so Imax = 4I0, i.e. four times the intensity due to each slit.

Constructive interference: cos2(φ/2) = 1 ⇒ φ = 0, ±2π, ±4π, … = 2nπ (n = 0, 1, 2, …).

Destructive interference: cos2(φ/2) = 0 ⇒ φ = ±π, ±3π, … = (2n + 1)π (n = 0, 1, 2, …), and then Imin = 0.

Teacher's Note: Adding two equal cosines gives amplitude 2a cos(φ/2); squaring gives 4I₀cos²(φ/2) with a maximum of 4I₀.

Exam Note: Use cos sum identity; I = 4I₀cos²(φ/2).

Question 7. (a) What are coherent sources of light? State two conditions for two light sources to be coherent. (b) Derive a mathematical expression for the width of interference fringes obtained in Young’s double slit experiment with the help of a suitable diagram. (c) If s is the size of the source and b its distance from the plane of the two slits, what should be the criterion for the interference fringe to be seen? [CBSE Delhi 2011, Panchkula 2015] OR (a) In Young’s double slit experiment, describe briefly how bright and dark fringes are obtained on the screen kept in front of a double slit. Hence obtain the expression for the fringe width. (b) The ratio of the intensities at minima to the maxima in the Young’s double slit experiment is 9 : 25. Find the ratio of the widths of the two slits. [CBSE (AI) 2014]

Solution.

Coherent sources are those which emit light of exactly the same frequency and have a zero or constant phase difference between them.

Conditions: (i) The sources should be monochromatic and originate from a common single source. (ii) The amplitudes of the waves should be equal (or nearly equal).

Bright and dark fringes: A narrow slit S is illuminated by monochromatic light of wavelength λ. Light from S falls on the two slits S1 and S2, which behave as two coherent sources. The spherical waves from S1 and S2 superpose and produce an interference pattern on the screen. At a point P the path difference is S2P − S1P. If it is nλ (n = 0, 1, 2, …), P is bright (maximum); if it is (2n − 1)λ/2 (n = 1, 2, 3, …), P is dark (minimum).

S₁S₂ScreenOPNdDxS₂P − S₁P = S₂N ≈ d sinθ

Fringe width: Let the slits be d apart, the screen at distance D, and P at distance x from the centre O. From the right-angled triangles S2BP and S1AP:

(S2P)2 − (S1P)2 = [D2 + (x + d/2)2] − [D2 + (x − d/2)2] = 2xd

(S2P + S1P)(S2P − S1P) = 2xd ⇒ S2P − S1P = 2xd/(S2P + S1P)

For P close to O, S2P + S1P ≈ 2D, so the path difference is xd/D.

Bright fringes: xd/D = nλ ⇒ xn = nλD/d (n = 0, 1, 2, …); x0 = 0 is the central bright fringe.

Dark fringes: xd/D = (2n − 1)λ/2 ⇒ x′n = (2n − 1)λD/2d (n = 1, 2, 3, …).

The distance between two consecutive bright (or dark) fringes is the fringe width: β = xn − xn−1 = λD/d.

The expression for fringe width is free from n, so all fringes have the same width. Since β ∝ λ, fringes of red light are broader than those of blue light.

(c) The interference fringes are seen only if the source is small enough: s/b < λ/d.

OR (b) The intensity of light is proportional to the slit width and to the square of the amplitude: I ∝ w ∝ a2.

Imin/Imax = (a1 − a2)2/(a1 + a2)2 = 9/25 ⇒ (a1 − a2)/(a1 + a2) = 3/5 ⇒ 5a1 − 5a2 = 3a1 + 3a2 ⇒ a1/a2 = 4/1

Ratio of slit widths: w1/w2 = I1/I2 = a12/a22 = (4/1)2 = 16 : 1.

Teacher's Note: Path difference xd/D equated to nλ gives bright fringes at nλD/d; adjacent fringes are λD/d apart.

Exam Note: Draw geometry; path difference xd/D; fringe width λD/d.

Question 8. What is interference of light? Write two essential conditions for sustained interference pattern to be produced on the screen. Draw a graph showing the variation of intensity versus the position on the screen in Young’s experiment when (a) both the slits are opened and (b) one of the slits is closed. What is the effect on the interference pattern in Young’s double slit experiment when: (i) Screen is moved closer to the plane of slits? (ii) Separation between two slits is increased? Explain your answer in each case.

Solution.

Interference of light: When two waves of the same frequency and constant initial phase difference travel in the same direction along a straight line simultaneously, they superpose so that the intensity of the resultant is maximum at certain points and minimum at certain other points. This redistribution of energy is called interference.

Conditions for sustained interference:

(i) The two interfering sources must be coherent and of the same frequency, i.e. they must emit light of the same wavelength and their initial phase difference must remain constant. Otherwise the phase difference varies continuously and the intensity at a point keeps changing between maximum and minimum, like beats in sound.

(ii) The interfering waves must have equal amplitudes. Otherwise the minimum intensity will not be zero and there will be general illumination.

Graph of intensity against position x: (a) both slits open: bright and dark fringes with peaks of 4I0; (b) one slit closed: only a broad diffraction pattern of intensity I0 with no fringes.

xI(a) both slits open (peaks 4I₀)(b) one slit closed (I₀)

Fringe width β = Dλ/d.

(i) β ∝ D. When the screen is moved closer to the plane of the slits, D decreases, so the fringe width decreases and the fringes come closer.

(ii) β ∝ 1/d. When the separation between the slits is increased, the fringe width decreases (fringes become closer together).

Teacher's Note: With both slits open the fringes peak at 4I₀; closing one slit leaves a single broad hump of I₀.

Exam Note: Define; two conditions; graph; use β = Dλ/d.

Question 9. What is diffraction of light? Draw a graph showing the variation of intensity with angle in a single slit diffraction experiment. Write one feature which distinguishes the observed pattern from the double slit interference pattern. [CBSE (F) 2013] How would the diffraction pattern of a single slit be affected when: (i) The width of the slit is decreased? (ii) The monochromatic source of light is replaced by a source of white light?

Solution.

Diffraction of light: When light is incident on a narrow opening or an obstacle in its path, it bends at the sharp edges of the obstacle or opening. This phenomenon is called diffraction of light.

Graph of intensity against angle θ for a single slit:

θI−2λ/a−λ/a0λ/a2λ/a

Distinguishing feature: In an interference pattern all the maxima have the same intensity, while in the diffraction pattern the maxima have different intensities: the central maximum is the brightest and the intensity falls rapidly for the first, second, … secondary maxima on either side.

(i) Slit width decreased: The first minimum is at sin θ = λ/a. If the width a is decreased, sin θ (and θ) increases for a given wavelength, so the central maximum and the other maxima and minima spread out farther on either side.

(ii) White light: With monochromatic light the pattern consists of alternate bright and dark bands. With white light the central maximum is white and the bands on either side are coloured.

Teacher's Note: Central maximum width is 2λ/a, so a narrower slit spreads the pattern; white light colours the sides.

Exam Note: Define; label graph; slit narrower means wider pattern.

Question 10. Describe diffraction of light due to a single slit. Explain formation of a pattern of fringes obtained on the screen and plot showing variation of intensity with angle θ in single slit diffraction. [CBSE Delhi 2010, (F) 2013, (AI) 2014]

Solution.

Diffraction at a single slit: When monochromatic light is incident on a single slit, a diffraction pattern is obtained on a screen placed behind it. It contains bright and dark bands; the central band is the brightest and the intensity decreases on both sides.

Explanation: Let AB be a slit of width a, illuminated by a parallel beam of monochromatic light. The pattern results from the superposition of a large number of wavelets from different points of the illuminated slit. Let θ be the angle of diffraction for the waves reaching a point P of the screen, and AN the perpendicular dropped from A on the wave diffracted from B.

ABScreenCPNθSlit width a = ABBN = a sinθ

The path difference between the rays from A and B is Δ = BP − AP = BN = a sinθ (in triangle ANB, ∠ANB = 90° and ∠BAN = θ).

Central maximum: At the central point C, θ = 0. The waves from all points of the slit arrive in the same phase, giving maximum intensity at C.

Minima: Divide the slit into two halves. At θ for which a sinθ = λ, the path difference between the wavelets from corresponding points of the two halves is λ/2, so the two halves cancel in pairs and the intensity is zero. In general the minima are at a sinθ = nλ (n = ±1, ±2, …).

Secondary maxima: Now divide the slit into three parts. At a sinθ = 3λ/2, the first two parts have a path difference of λ/2 between their extreme ends and cancel each other; the remaining third part contributes to the intensity at a point between two minima. This gives the first secondary maximum, of much weaker intensity than the central maximum. In the same way there are secondary maxima between any two consecutive minima, at a sinθ = (n + ½)λ, and their intensity goes on decreasing with the order n, because the contributing part of the slit becomes smaller: 1/3 for n = 1, 1/5 for n = 2, 1/7 for n = 3, and so on.

Variation of intensity with θ:

θI−2λ/a−λ/a0λ/a2λ/a

Teacher's Note: Splitting the slit into equal parts shows minima at a sinθ = nλ and weaker maxima between them.

Exam Note: Show path difference a sinθ; minima nλ; maxima (n+½)λ; graph.

Question 11. (i) What is linearly polarized light? Describe briefly using a diagram how sunlight is polarised. (ii) Unpolarised light is incident on a Polaroid. How would the intensity of transmitted light change when the polaroid is rotated? [CBSE (AI) 2013]

Solution.

(i) The light wave whose electric field vector vibrates in a single plane (one direction) perpendicular to the direction of propagation is called linearly (plane) polarised light.

Polarisation of sunlight: The molecules of air behave like dipole radiators and do not scatter energy along the dipole axis. Take a dipole molecule lying along the x-axis. Unpolarised sunlight travelling along the x-axis has its electric field in the y–z plane. The molecule is made to oscillate along both y and z, and it scatters light along the y and z directions, with the electric vector of the light in each direction perpendicular to the direction of propagation and lying in one plane. Light travelling along y and z is thus plane polarised.

Air moleculeTo observer (through a rotating Polaroid)Unpolarised sunlightDots: vibration perpendicular to the plane of the paper. Double arrows: vibration in the plane of the paper.

(ii) Unpolarised light falling on a Polaroid emerges with its electric vibrations along the pass axis of the Polaroid (plane polarised).

UnpolarisedPolaroidPlane polarised, I = I₀/2pass axis

If the Polaroid is rotated, the plane of polarisation of the emergent light rotates with it, but the intensity of the transmitted light remains unchanged (half of the incident intensity), because unpolarised light has vibrations equally in all directions.

Teacher's Note: Air molecules cannot radiate along their oscillation axis, so scattered sunlight at 90° to the beam is plane polarised.

Exam Note: Define; sketch scattering; intensity unchanged when rotated.

Question 12. (i) Why does unpolarised light from a source show a variation in intensity when viewed through a polaroid which is rotated? Show with the help of a diagram, how unpolarised light from sun gets linearly polarised by scattering. (ii) Three identical polaroid sheets P1, P2 and P3 are oriented so that the pass axis of P2 and P3 are inclined at angles of 60° and 90° respectively with the pass axis of P1. A monochromatic source S of unpolarised light of intensity I0 is kept in front of the polaroid sheet P1 as shown in the figure. Determine the intensities of light as observed by the observer at O, when polaroid P3 is rotated with respect to P2 at angles θ = 30° and 60°. [CBSE North 2016]

Solution.

(i) According to Malus’ law, the intensity transmitted by a Polaroid is I = I0 cos2θ, where θ is the angle between the direction of polarisation of the light and the pass axis. So for polarised light (such as scattered skylight) the transmitted intensity varies as cos2θ as the Polaroid is rotated. (Light that is truly unpolarised would show no variation.)

The Sun emits unpolarised light, represented by dots and double arrows: the dots stand for polarisation perpendicular to the plane of the paper and the double arrows for polarisation in the plane. When the unpolarised light strikes the molecules of the atmosphere, the electrons in the molecules acquire components of motion in both directions. The charge accelerating parallel to the double arrow does not radiate energy towards the observer, so only the component of the electric field represented by dots radiates towards the observer. If this scattered light is viewed through an artificial Polaroid, its intensity varies with rotation of the Polaroid.

Air moleculeTo observer (through a rotating Polaroid)Unpolarised sunlightDots: vibration perpendicular to the plane of the paper. Double arrows: vibration in the plane of the paper.

(ii) The arrangement is as shown.

SI₀P1P2P3axis ↕ (0°)axis at 60° to P1axis at 90° to P1O

After P1 (unpolarised light): I1 = I0/2.

P2 is at 60° to P1: I2 = (I0/2) cos260° = (I0/2)(1/4) = I0/8.

P3 makes angle θ with P2: I3 = I2 cos2θ = (I0/8) cos2θ.

For θ = 30°: I3 = (I0/8)(3/4) = 3I0/32.

For θ = 60°: I3 = (I0/8)(1/4) = I0/32.

Teacher's Note: Each Polaroid multiplies intensity by cos² of the angle between axes; unpolarised light first loses half.

Exam Note: Use I₀/2 first, then cos² for each step.

Question 13. (i) Distinguish between unpolarised light and linearly polarised light. How does one get linearly polarised light with the help of a Polaroid? (ii) A narrow beam of unpolarised light of intensity I0 is incident on a Polaroid P1. The light transmitted by it is then incident on a second Polaroid P2 with its pass axis making angle of 60° relative to the pass axis of P1. Find the intensity of the light transmitted by P2. [CBSE Delhi 2017]

Solution.

(i) Unpolarised light: the light having vibrations of the electric field vector in all possible directions perpendicular to the direction of wave propagation is called ordinary (unpolarised) light.

Linearly (plane) polarised light: the light having vibrations of the electric field vector in only one direction perpendicular to the direction of propagation.

When unpolarised light is incident on a Polaroid, the electric vectors along the direction of its aligned molecules are absorbed; the electric vector oscillating along the direction perpendicular to the aligned molecules passes through. The transmitted light is linearly polarised.

UnpolarisedPolaroidPlane polarised, I = I₀/2pass axis

(ii) Intensity after P1 = I0/2. By Malus’ law, I = (I0/2) cos2θ with θ = 60°:

I = (I0/2) cos260° = (I0/2) × (1/2)2 = I0/8.

Teacher's Note: Polaroid transmits only the field component along its pass axis; the first sheet halves unpolarised intensity.

Exam Note: Define both; Polaroid transmits one direction; I = I₀/8.

Question 14. (i) Explain two features to distinguish between the interference pattern in Young’s double slit experiment with the diffraction pattern obtained due to a single slit. (ii) A monochromatic light of wavelength 500 nm is incident normally on a single slit of width 0.2 mm to produce a diffraction pattern. Find the angular width of the central maximum obtained on the screen. Estimate the number of fringes obtained in Young’s double slit experiment with fringe width 0.5 mm, which can be accommodated within the region of total angular spread of the central maximum due to single slit. [CBSE Delhi 2017]

Solution.

(i) Differences between interference and diffraction:

InterferenceDiffraction
(a) It is due to the superposition of two waves coming from two coherent sources.(a) It is due to the superposition of secondary wavelets originating from different parts of the same wave front.
(b) The width of the interference bands is equal.(b) The width of the diffraction bands is not the same.
(c) The intensity of all maxima (fringes) is the same.(c) The intensity of the central maximum is maximum and goes on decreasing rapidly with increase in order of maxima.

(ii) Angular width of the central maximum = 2λ/a = (2 × 500 × 10−9)/(0.2 × 10−3) = 5 × 10−3 radian.

Let the screen be at distance D from the slits (the same for both patterns). Linear width of the central maximum: β0 = 2λD/a. Fringe width of the double-slit pattern: β = λD/d.

Number of double-slit fringes in the central maximum: n = β0/β = (2λD/a)/β.

The question does not give D. Taking D = 1 m: β0 = (2 × 500 × 10−9 × 1)/(0.2 × 10−3) = 5 × 10−3 m = 5 mm, so n = 5 mm / 0.5 mm = 10 fringes.

Teacher's Note: Count fringes by dividing the central-maximum width 2λD/a by β; the screen distance D must be assumed.

Exam Note: Angular width 2λ/a = 5×10⁻³ rad; fringes = β₀/β.

Download Xam Idea Solutions for Class 12 Math PDF

Download Xam Idea Solutions for Class 12

Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Physics Chapter 10 Wave Optics Long Answer Questions tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Mastering Core Concepts with Xam Idea Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your Class 12 Exam Preparation

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 12 Physics?

They are chapter-wise solved questions from the book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.