Pradeep's KL Gogia Solutions Physics Chapter 13 Ray Optics Part 2

Step-by-Step Pradeep's KL Gogia Solutions for Class 12 Physics Chapter 13 Ray Optics

Access comprehensive textbook solutions for Chapter 13 Ray Optics using the Pradeep's KL Gogia reference material for Class 12 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 13 Ray Optics Textbook Solutions PDF

Access the complete solution PDF for Class 12 Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Ray Optics - Refraction and Lenses (pages 27-52)

Refraction of Light: Examples

Question 1. A beam of monochromatic blue light of wavelength 4200 Å in air travels in water (μ = 4/3). Its wavelength in water will be (a) 2800 Å (b) 5600 Å (c) 3150 Å (d) 4000 Å

Solution. (c) μ ∝ 1/λ ⇒ μ1/μ2 = λ2/λ1 ⇒ 1/(4/3) = λ2/4200 ⇒ λ2 = 3150 Å.

Teacher's Note: Frequency stays constant; wavelength shrinks by the factor μ in a denser medium.

Exam Note: Wavelength divides by μ; speed too.

Question 2. On a glass plate a light wave is incident at an angle of 60°. If the reflected and the refracted waves are mutually perpendicular, the refractive index of material is (a) √3/2 (b) √3 (c) 3/2 (d) 1/√3 [MP PMT 1994; Haryana CEE 1996]

Solution. (b) Reflected and refracted rays are perpendicular, so (from the figure) the angle of refraction r = 30°. ∴ μ = sin i / sin r = sin 60° / sin 30° = √3.

Teacher's Note: Perpendicular reflected and refracted rays give r = 90° − i, so μ = tan i (Brewster).

Exam Note: Use r = 90° − i; μ = tan 60°.

Question 3. Velocity of light in glass whose refractive index with respect to air is 1.5 is 2 × 108 m/s and in a certain liquid the velocity of light is found to be 2.50 × 108 m/s. The refractive index of the liquid with respect to air is (a) 0.64 (b) 0.80 (c) 1.20 (d) 1.44 [CPMT 1978; MP PET/PMT 1988]

Solution. (c) μ ∝ 1/v ⇒ μl/μg = vg/vl ⇒ μl/1.5 = (2 × 108)/(2.5 × 108) ⇒ μl = 1.2.

Teacher's Note: Refractive index is inversely proportional to speed; compare with the known glass value.

Exam Note: Write μ ∝ 1/v, then substitute.

Question 4. A ray of light passes through four transparent media with refractive indices μ1, μ2, μ3 and μ4 as shown in the figure. The surfaces of all media are parallel. If the emergent ray CD is parallel to the incident ray AB, we must have (a) μ1 = μ2 (b) μ2 = μ3 (c) μ3 = μ4 (d) μ4 = μ1

Solution. (d) For successive refraction through different media, μ sin θ = constant. Here θ is the same in the two extreme media. Hence μ1 = μ4. (Figure not redrawn: four parallel slabs with rays AB in the first and CD in the last medium.)

Teacher's Note: Snell's law across parallel layers: only the first and last media matter.

Exam Note: Same angle at both ends means equal μ.

Question 5. A ray of light is incident at the glass–water interface at an angle i, it emerges finally parallel to the surface of water, then the value of μg would be (a) (4/3) sin i (b) 1/sin i (c) 4/3 (d) 1 (water μw = 4/3)

Solution. (b) For the glass–water interface gμw = sin i / sin r ......(i). For the water–air interface wμa = sin r / sin 90° ......(ii). Multiplying (i) and (ii): gμw × wμa = gμa = sin i / sin 90° = sin i ⇒ μg = 1/sin i.

Teacher's Note: Emerging parallel to the surface means 90° refraction in air; chain the interfaces.

Exam Note: Multiply successive Snell ratios; intermediate angle cancels.

Question 6. The ratio of thickness of plates of two transparent mediums A and B is 6 : 4. If light takes equal time in passing through them, then refractive index of B with respect to A will be (a) 1.4 (b) 1.5 (c) 1.75 (d) 1.33

Solution. (b) Using t = μx/c, equal times give μAxA = μBxB ⇒ μB/μA = xA/xB = 6/4 ⇒ AμB = 3/2 = 1.5.

Teacher's Note: Optical path μx divided by c gives the time; equal times mean equal optical paths.

Exam Note: Use t = μx/c, equate times.

Question 7. A ray of light travelling in vacuum enters a medium of refractive index μ; the angle of incidence is found to be twice the angle of refraction. Then the angle of incidence is (a) cos−1(μ/2) (b) 2 cos−1(μ/2) (c) 2 sin−1(μ) (d) 2 sin−1(μ/2)

Solution. (b) μ = sin i / sin r = sin 2r / sin r = 2 sin r cos r / sin r = 2 cos r ⇒ r = cos−1(μ/2). So i = 2r = 2 cos−1(μ/2).

Teacher's Note: Double-angle identity sin 2r = 2 sin r cos r reduces the ratio to 2 cos r.

Exam Note: Apply sin 2θ = 2 sin θ cos θ.

Question 8. A ray of light falls on the surface of a spherical glass paper weight making an angle α with the normal and is refracted in the medium at an angle β. The angle of deviation of the emergent ray from the direction of the incident ray is (a) (α − β) (b) 2(α − β) (c) (α − β)/2 (d) (α + β)

Solution. (b) From the figure, ΔOBC is isosceles, hence ∠OCB = β and the emergent angle is α. The sum of two interior angles = exterior angle, so δ = (α − β) + (α − β) = 2(α − β). (Figure not redrawn: circle with centre O, chord BC, incident ray AB and emergent ray CD.)

Teacher's Note: Radii OB = OC make equal angles; each surface deviates the ray by α − β.

Exam Note: Two refractions, each deviating α − β.

Question 9. A rectangular slab of refractive index μ is placed over another slab of refractive index 3, both slabs being identical in dimensions. If a coin is placed below the lower slab, for what value of μ will the coin appear to be placed at the interface between the slabs when viewed from the top (a) 1.8 (b) 2 (c) 1.5 (d) 2.5

Solution. (c) Apparent depth of coin as seen from top = x/μ1 + x/μ2 = x ⇒ 1/μ1 + 1/μ2 = 1 ⇒ 1/3 + 1/μ = 1 ⇒ μ = 1.5.

Teacher's Note: Apparent depths of stacked slabs add: sum of thickness/μ; set it equal to one slab thickness.

Exam Note: Add x/μ terms; equate to x.

Question 10. A coin is kept at bottom of an empty beaker. A travelling microscope is focussed on the coin from top, now water is poured in beaker up to a height of 10 cm. By what distance and in which direction should the microscope be moved to bring the coin again in focus (a) 10 cm upward (b) 10 cm downward (c) 2.5 cm upwards (d) 2.5 cm downwards

Solution. (c) When water is poured in the beaker, the coin appears to shift by a distance d = h/4 = 10/4 = 2.5 cm (upward). Hence to bring the coin again in focus, the microscope should be moved by 2.5 cm in upward direction.

Teacher's Note: Normal shift = h(1 − 1/μ) = h/4 for water; the coin appears raised, so the microscope rises.

Exam Note: Shift = h(1 − 1/μ), direction upward.

Question 11. Consider the situation shown in figure. Water (μw = 4/3) is filled in a beaker up to a height of 10 cm. A plane mirror fixed at a height of 5 cm from the surface of water. Distance of image from the mirror after reflection from it of an object O at the bottom of the beaker is (a) 15 cm (b) 12.5 cm (c) 7.5 cm (d) 10 cm

Solution. (b) The object appears raised by 10/4 cm (2.5 cm). Hence distance between mirror and O′ = 5 + 7.5 = 12.5 cm. So the final image will be formed at 12.5 cm behind the plane mirror.

Teacher's Note: First find the apparent position of O seen through water, then reflect it in the mirror.

Exam Note: Apparent depth 7.5 cm, plus 5 cm gap.

Question 12. The wavelength of light in two liquids x and y is 3500 Å and 7000 Å, then the critical angle of x relative to y will be (a) 60° (b) 45° (c) 30° (d) 15°

Solution. (c) sin C = μ2/μ1 = λ1/λ2 = 3500/7000 = 1/2 ⇒ C = 30°.

Teacher's Note: μ is inversely proportional to λ, so μy/μx = λx/λy gives sin C directly.

Exam Note: sin C = μ(rarer)/μ(denser) = λ ratio.

Question 13. A light ray from air is incident (as shown in figure) at one end of a glass fiber (refractive index μ = 1.5) making an incidence angle of 60° on the lateral surface, so that it undergoes a total internal reflection. How much time would it take to traverse the straight fiber of length 1 km (a) 3.33 μsec (b) 6.67 μsec (c) 5.77 μsec (d) 3.85 μsec [Orissa JEE 2002]

Solution. (d) When total internal reflection just takes place from the lateral surface then i = C, i.e. C = 60°. From μ = 1/sin C ⇒ μ = 1/sin 60° = 2/√3. Hence time taken by light to traverse some distance in a medium t = μx/c ⇒ t = (2/√3) × (1 × 103)/(3 × 108) = 3.85 μsec. (As printed, the stated μ = 1.5 is not used; the solution takes μ from the critical angle.)

Teacher's Note: Just-TIR gives μ = 1/sin C; time is path length times μ over c.

Exam Note: Take μ from the critical angle, not given data.

Question 14. A glass prism of refractive index 1.5 is immersed in water (μ = 4/3). A light beam incident normally on the face AB is totally reflected to reach the face BC if (a) sin θ > 8/9 (b) 2/3 < sin θ < 8/9 (c) sin θ ≤ 2/3 (d) cos θ ≥ 8/9

Solution. (a) From the figure, total internal reflection takes place at AC only if θ > C ⇒ sin θ > sin C ⇒ sin θ > 1/(wμg) ⇒ sin θ > 1/(9/8) ⇒ sin θ > 8/9.

Teacher's Note: Relative index glass-to-water is (3/2)/(4/3) = 9/8; TIR needs incidence beyond critical angle.

Exam Note: Use relative index 9/8 for the critical angle.

Question 15. When light is incident on a medium at angle i and refracted into a second medium at an angle r, the graph of sin i vs sin r is as shown in the graph (straight line at 30° to the sin r axis). From this, one can conclude that (a) Velocity of light in the second medium is 1.73 times the velocity of light in the I medium (b) Velocity of light in the I medium is 1.73 times the velocity in the II medium (c) The critical angle for the two media is given by sin ic = 1/√3 (d) sin ic = 1/2

Solution. (b, c) From the graph tan 30° = sin r / sin i = 1/(1μ2) ⇒ 1μ2 = √3 ⇒ μ2/μ1 = v1/v2 = 1.73 ⇒ v1 = 1.73 v2. Also from μ = 1/sin C ⇒ sin C = 1/(1μ2) = 1/√3. Corrected: the book prints v1 = 1.75 v2; the correct value is 1.73 v2 (√3), consistent with option (b).

Teacher's Note: Slope of sin r against sin i gives 1/μ; larger μ means slower light.

Exam Note: Slope = 1/relative index; read μ = √3.

Question 16. A beam of light consisting of red, green and blue colours is incident on a right angled prism. The refractive indices of the material of the prism for the above red, green and blue wavelength are 1.39, 1.44 and 1.47 respectively. The prism will (a) Separate part of red colour from the green and the blue colours (b) Separate part of the blue colour from the red and green colours (c) Separate all the colours from one another (d) Not separate even partially any colour from the other two colours

Solution. (a) At face AB, i = 0 so r = 0, i.e., no refraction will take place. So light will be incident on face AC at an angle of incidence of 45°. The face AC will not transmit the light for which i > θC, i.e., sin 45° > 1/μ, i.e., μ > √2 (= 1.41). Now as μR < μ while μG and μB > μ, so red will be transmitted through the face AC while green and blue will be reflected. So the prism will separate red colour from green and blue.

Teacher's Note: Compare each colour's μ with √2 = 1.41: only red (1.39) escapes at 45°.

Exam Note: Critical angle at 45° needs μ > √2.

Question 17. An air bubble in a glass slab (μ = 1.5) is 6 cm deep when viewed from one face and 4 cm deep when viewed from the opposite face. The thickness of the glass plate is (a) 10 cm (b) 6.67 cm (c) 15 cm (d) None of these

Solution. (c) Let thickness of slab be t and distance of air bubble from one side is x. When viewed from side (1): 1.5 = x/6 ⇒ x = 9 cm. When viewed from side (2): 1.5 = (t − x)/4 = (t − 9)/4 ⇒ t = 15 cm.

Teacher's Note: Real depth = μ × apparent depth from each face; the two real depths add to thickness.

Exam Note: Real depths 9 cm and 6 cm sum to t.

Tricky Examples

Question T1. One face of a rectangular glass plate 6 cm thick is silvered. An object held 8 cm in front of the first face, forms an image 12 cm behind the silvered face. The refractive index of the glass is (a) 0.4 (b) 0.8 (c) 1.2 (d) 1.6

Solution. (c) Thickness of glass plate t = 6 cm. Let x be the apparent position of the silvered surface. According to the property of a plane mirror, x + 8 = 12 + 6 − x ⇒ x = 5 cm. Also μ = t/x ⇒ μ = 6/5 = 1.2.

Teacher's Note: The silvered face is a plane mirror seen at apparent depth x; object and image are symmetric about it.

Exam Note: Mirror at apparent depth x; μ = t/x.

Question T2. A ray of light is incident on a glass sphere of refractive index 3/2. What should be the angle of incidence so that the ray which enters the sphere doesn't come out of the sphere (a) tan−1(2/3) (b) sin−1(2/3) (c) 90° (d) cos−1(1/3)

Solution. (c) The ray does not come out of the sphere means TIR takes place. Hence from the figure ∠ABO = ∠OAB = C. ∴ μ = 1/sin C ⇒ sin C = 1/μ = 2/3. Applying Snell's law at A: sin i / sin C = 3/2 ⇒ sin i = (3/2) sin C = (3/2) × (2/3) = 1 ⇒ i = 90°.

Teacher's Note: Sphere symmetry makes the inner angle at B equal the refraction angle at A.

Exam Note: Only grazing incidence (90°) gives TIR.

Question T3. Two glass slabs (μ = 1.5, thickness 1.5 cm each, separated by 1.5 cm) lie above a point P at 2.0 cm below the lower slab. The image of point P when viewed from top of the slabs will be (a) 2.0 cm above P (b) 1.5 cm above P (c) 2.0 cm below P (d) 1 cm above P

Solution. (d) The two slabs will shift the image a distance d = 2(1 − 1/μ)t = 2(1 − 1/1.5)(1.5) = 1 cm. Therefore, final image will be 1 cm above point P.

Teacher's Note: Each slab shifts the image by t(1 − 1/μ) toward the observer; gaps do not matter.

Exam Note: Total shift = sum of slab shifts.

Refraction from Curved Surface

Question S1. In a thin spherical fish bowl of radius 10 cm filled with water of refractive index 4/3 there is a small fish at a distance of 4 cm from the centre C as shown in figure. Where will the image of fish appear, if seen from E (a) 5.2 cm (b) 7.2 cm (c) 4.2 cm (d) 3.2 cm

Solution. (a) By using (μ2 − μ1)/R = μ2/v − μ1/u, where μ1 = 4/3, μ2 = 1, u = −6 cm, R = −10 cm, v = ? On putting values v = −5.2 cm (the book's value; an exact calculation gives −5.29 cm, nearest to option (a)).

Teacher's Note: Single spherical refracting surface: u is measured from the pole, here 10 − 4 = 6 cm.

Exam Note: Take R = −10 cm, u = −6 cm.

Lens: Examples

Question 18. A thin lens of focal length f1 and its aperture has diameter d. It forms an image of intensity I. Now the central part of the aperture up to diameter d/2 is blocked by an opaque paper. The focal length and image intensity will change to (a) f/2 and I/2 (b) f and I/4 (c) 3f/4 and I/2 (d) f and 3I/4

Solution. (d) Centre part of the aperture up to diameter d/2 is blocked, i.e. 1/4 of the area is blocked (A = πd²/4). Hence remaining area A′ = (3/4)A. Also intensity ∝ area ⇒ I′/I = A′/A = 3/4 ⇒ I′ = (3/4)I. Focal length doesn't depend upon aperture.

Teacher's Note: Blocking the lens centre removes area, not focal length; intensity scales with remaining area (d/2 blocks one quarter).

Exam Note: f unchanged; intensity ∝ area.

Question 19. The power of a thin convex lens (aμg = 1.5) is +5.0 D. When it is placed in a liquid of refractive index aμl, then it behaves as a concave lens of focal length 100 cm. The refractive index of the liquid aμl will be (a) 5/3 (b) 4/3 (c) √3 (d) 5/4

Solution. (a) By using fl/fa = (aμg − 1)/(lμg − 1); where lμg = μg/μl = 1.5/μl and fa = 1/P = 1/5 m = 20 cm. ⇒ −100/20 = (1.5 − 1)/(1.5/μl − 1) ⇒ μl = 5/3.

Teacher's Note: A convex lens turns concave when the liquid is denser than the glass (here 5/3 > 1.5).

Exam Note: Use fl/fa ratio; fl = −100 cm.

Question 20. A double convex lens made of a material of refractive index 1.5 and having a focal length of 10 cm is immersed in liquid of refractive index 3.0. The lens will behave as (a) Diverging lens of focal length 10 cm (b) Diverging lens of focal length 10/3 cm (c) Converging lens of focal length 10/3 cm (d) Converging lens of focal length 30 cm [NCERT 1973]

Solution. (a) By using fl/fa = (aμg − 1)/(lμg − 1) ⇒ fl/(+10) = (1.5 − 1)/(1.5/3 − 1) = 0.5/(−0.5) = −1 ⇒ fl = −10 cm (i.e. diverging lens).

Teacher's Note: Relative index of glass in liquid is 0.5 (<1), so the lens changes nature and sign of f.

Exam Note: Relative index below 1 gives diverging.

Question 21. Figure given below shows a beam of light converging at point P. When a concave lens of focal length 16 cm is introduced in the path of the beam at a place O shown by dotted line, the beam converges at a distance x from the lens. The value x will be equal to (a) 12 cm (b) 24 cm (c) 36 cm (d) 48 cm (P is 12 cm from O)

Solution. (d) From the figure it is clear that for the lens: u = +12 cm (virtual object) and v = x = ? By using 1/f = 1/v − 1/u ⇒ 1/(−16) = 1/x − 1/(+12) ⇒ x = 48 cm. (The printed solution shows the focal length sign unclearly; the answer 48 cm is confirmed with f = −16 cm.)

Teacher's Note: Converging beam gives a virtual object (u positive); the diverging lens pushes the focus farther.

Exam Note: Take u = +12 cm, f = −16 cm.

Question 22. A convex lens of focal length 40 cm is in a contact with a concave lens of focal length 25 cm. The power of combination is (a) − 1.5 D (b) − 6.5 D (c) + 6.5 D (d) + 6.67 D

Solution. (a) By using 1/F = 1/f1 + 1/f2 ⇒ 1/F = 1/(+40) + 1/(−25) ⇒ F = −200/3 cm, hence P = 100/F(cm) = 100/(−200/3) = −1.5 D.

Teacher's Note: Powers add for lenses in contact; the concave lens is stronger, so the net lens is diverging.

Exam Note: P = P1 + P2 = 2.5 − 4 D.

Question 23. A combination of two thin lenses with focal lengths f1 and f2 respectively forms an image of distant object at distance 60 cm when lenses are in contact. The position of this image shifts by 30 cm towards the combination when two lenses are separated by 10 cm. The corresponding values of f1 and f2 are (a) 30 cm, −60 cm (b) 20 cm, −30 cm (c) 15 cm, −20 cm (d) 12 cm, −15 cm [AIIMS 1995]

Solution. (b) Initially F = 60 cm (focal length of combination). Hence by using 1/F = 1/f1 + 1/f2 ⇒ 1/f1 + 1/f2 = 1/60, i.e. (f1 + f2)/(f1f2) = 1/60 ......(i). Finally using 1/F′ = 1/f1 + 1/f2 − d/(f1f2) where F′ = 30 cm and d = 10 cm ⇒ 1/30 = 1/f1 + 1/f2 − 10/(f1f2) ......(ii). From (i) and (ii): f1f2 = −600. From (i): f1 + f2 = −10 ......(iii). Also f1 − f2 = √[(f1 + f2)² − 4f1f2] ⇒ f1 − f2 = 50 ......(iv). From (iii) and (iv): f1 = 20 and f2 = −30.

Teacher's Note: Two equations: contact condition gives f1f2 = −600, separation condition fixes the sum and difference.

Exam Note: Use both F and F′ formulas.

Question 24. A thin double convex lens has radii of curvature each of magnitude 40 cm and is made of glass with refractive index 1.65. Its focal length is nearly (a) 20 cm (b) 31 cm (c) 35 cm (d) 50 cm

Solution. (b) By using f = R/[2(μ − 1)] ⇒ f = 40/[2(1.65 − 1)] = 30.7 cm ≈ 31 cm. (Corrected: the book prints the formula as R/(2μ − 1); the correct lens-maker form for an equiconvex lens is R/[2(μ − 1)], which the numbers use.)

Teacher's Note: Equiconvex lens-maker's formula: 1/f = (μ − 1)(2/R).

Exam Note: Subtract 1 from μ before doubling.

Question 25. A spherical surface of radius of curvature R separates air (refractive index 1.0) from glass (refractive index 1.5). The centre of curvature is in the glass. A point object P placed in air is found to have a real image Q in the glass. The line PQ cuts the surface at a point O and PO = OQ. The distance PO is equal to (a) 5R (b) 3R (c) 2R (d) 1.5R [MP PMT 1994; Haryana CEE 1996]

Solution. (a) By using μ2/v − μ1/u = (μ2 − μ1)/R, where μ1 = 1, μ2 = 1.5, u = −OP, v = OQ. Hence 1.5/OQ + 1/OP = 0.5/R ⇒ 1.5/OP + 1/OP = 0.5/R ⇒ OP = 5R.

Teacher's Note: PO = OQ lets you replace v by |u| in the single-surface refraction formula.

Exam Note: Set v = −u in magnitude; solve for OP.

Question 26. The distance between an object and the screen is 100 cm. A lens produces an image on the screen when placed at either of the positions 40 cm apart. The power of the lens is (a) 3 D (b) 5 D (c) 7 D (d) 9 D

Solution. (b) By using f = (D² − x²)/(4D) ⇒ f = (100² − 40²)/(4 × 100) = 21 cm. Hence power P = 100/f(cm) = 100/21 ≈ +5 D.

Teacher's Note: Displacement (Bessel) method: f = (D² − x²)/4D; power is 100/f in dioptres.

Exam Note: Use Bessel's formula, then P = 100/f.

Question 27. Shown in figure is a convergent lens placed inside a cell filled with a liquid. The lens has focal length +20 cm when in air and its material has refractive index 1.50. If the liquid has refractive index 1.60, the focal length of the system is (a) +80 cm (b) −80 cm (c) −24 cm (d) −100 cm

Solution. (d) Here the system is treated as three lenses in contact: 1/f1 = (1.6 − 1)(1/∞ − 1/20) = −3/100 ......(i); 1/f2 = (1.5 − 1)(1/20 + 1/20) = 1/20 ......(ii); 1/f3 = (1.6 − 1)(1/−20 − 1/∞) = −3/100 ......(iii). By using 1/F = 1/f1 + 1/f2 + 1/f3 ⇒ 1/F = −3/100 + 1/20 − 3/100 = −1/100 ⇒ F = −100 cm. (Verified with surface powers: (1.5−1.6)/20 + (1.6−1.5)/(−20) = −0.01 cm−1.)

Teacher's Note: Treat liquid layers as plano-concave lenses in contact with the glass lens; add powers.

Exam Note: Add three powers: −0.03 + 0.05 − 0.03.

Question 28. A concave lens of focal length 20 cm placed in contact with a plane mirror acts as a (a) Convex mirror of focal length 10 cm (b) Concave mirror of focal length 40 cm (c) Concave mirror of focal length 60 cm (d) Concave mirror of focal length 10 cm [RA 1998]

Solution. (a) By using 1/F = 2/fl + 1/fm. Since fm = ∞ ⇒ F = fl/2 = 20/2 = 10 cm. (After silvering, a concave lens behaves as a convex mirror.)

Teacher's Note: Light crosses the lens twice before and after reflection, so power is 2/fl.

Exam Note: F = fl/2; diverging system.

Question 29. A candle placed 25 cm from a lens, forms an image on a screen placed 75 cm on the other end of the lens. The focal length and type of the lens should be (a) +18.75 cm and convex lens (b) −18.75 cm and concave lens (c) +20.25 cm and convex lens (d) −20.25 cm and concave lens

Solution. (a) In a concave lens, the image is always formed on the same side of the object. Hence the given lens is a convex lens for which u = −25 cm, v = 75 cm. By using 1/f = 1/v − 1/u ⇒ 1/f = 1/(+75) − 1/(−25) ⇒ f = +18.75 cm.

Teacher's Note: An image on a screen on the far side is real, which only a convex lens can give.

Exam Note: Real image on screen means convex.

Question 30. A convex lens forms a real image of an object for its two different positions on a screen. If height of the image in both the cases be 8 cm and 2 cm, then height of the object is (a) 16 cm (b) 8 cm (c) 4 cm (d) 2 cm [KCET (Engg./Med.) 2]

Solution. (c) By using O = √(I1I2) ⇒ O = √(8 × 2) = 4 cm.

Teacher's Note: In the displacement method, object size is the geometric mean of the two image sizes.

Exam Note: O = √(I1I2).

Question 31. A convex lens produces a real image m times the size of the object. What will be the distance of the object from the lens (a) ((m + 1)/m) f (b) (m − 1)f (c) ((m − 1)/m) f (d) (m + 1)/f [JIPMER 2002]

Solution. (a) By using m = f/(f + u), here −m = (+f)/((+f) + u) ⇒ −1/m = (f + u)/f = 1 + u/f ⇒ u = −((m + 1)/m)·f.

Teacher's Note: Real image is inverted, so magnification is −m; use m = f/(f + u).

Exam Note: Remember the sign: real image gives −m.

Question 32. An air bubble in a glass sphere having 4 cm diameter appears 1 cm from surface nearest to eye when looked along diameter. If aμg = 1.5, the distance of bubble from refracting surface is (a) 1.2 cm (b) 3.2 cm (c) 2.8 cm (d) 1.6 cm [CPMT 2002]

Solution. (a) By using μ2/v − μ1/u = (μ2 − μ1)/R where u = ?, v = −1 cm, μ1 = 1.5, μ2 = 1, R = −2 cm. 1/(−1) − 1.5/u = (1 − 1.5)/(−2) ⇒ u = −6/5 = −1.2 cm.

Teacher's Note: Bubble inside glass: light goes glass to air, so μ1 = 1.5 and R is negative for this surface.

Exam Note: Mind the signs of v and R.

Question 33. The sun's diameter is 1.4 × 109 m and its distance from the earth is 1011 m. The diameter of its image, formed by a convex lens of focal length 2 m will be (a) 0.7 cm (b) 1.4 cm (c) 2.8 cm (d) Zero (i.e. point image)

Solution. (c) From the figure D/d = 1011/2 ⇒ d = 2 × 1.4 × 109/1011 = 2.8 cm. (Figure not redrawn.)

Teacher's Note: Distant object forms its image at the focus; image size ≈ object angle × f.

Exam Note: Similar triangles: d = D·f/u.

Question 34. Two point light sources are 24 cm apart. Where should a convex lens of focal length 9 cm be put in between them from one source so that the images of both the sources are formed at the same place (a) 6 cm (b) 9 cm (c) 12 cm (d) 15 cm

Solution. (a) The given condition is satisfied only if one source (S1) is placed on one side such that u < f (i.e. it lies under the focus), and the other source (S2) on the other side such that u > f (beyond the focus). For S1: 1/f = 1/(−y) − 1/(−x) ⇒ 1/y = 1/x − 1/f ......(i). For S2: 1/f = 1/(+y) − 1/(−(24 − x)) ⇒ 1/y = 1/f − 1/(24 − x) ......(ii). From (i) and (ii): 1/x + 1/(24 − x) = 2/f = 2/9 ⇒ x² − 24x + 108 = 0 ⇒ x = 18 cm, 6 cm. Of the options, 6 cm is (a).

Teacher's Note: One image virtual (source inside focus), the other real; equate image positions to get a quadratic.

Exam Note: Both roots 6 and 18; only 6 is an option.

Question 35. There is an equiconvex glass lens with radius of each face as R and aμg = 3/2 and aμw = 4/3. If there is water in object space and air in image space, then the focal length is (a) 2R (b) R (c) 3R/2 (d) R²

Solution. (c) First surface (rarer to denser): (μ2 − μ1)/R = μ2/v1 − μ1/u ⇒ (3/2 − 4/3)/R = (3/2)/v1 ⇒ v1 = 9R. Second surface (denser to rarer): (1 − 3/2)/(−R) = 1/v2 − (3/2)/(9R) ⇒ 1/v2 = 2/(3R) ⇒ v2 = 3R/2. This is the focal length of the lens.

Teacher's Note: Apply single-surface refraction twice; the first image acts as object for the second surface.

Exam Note: First image at 9R, final at 3R/2.

Tricky Examples (continued)

Question T4. A luminous object is placed at a distance of 30 cm from the convex lens of focal length 20 cm. On the other side of the lens. At what distance from the lens a convex mirror of radius of curvature 10 cm be placed in order to have an upright image of the object coincident with it (a) 12 cm (b) 30 cm (c) 50 cm (d) 60 cm [CBSE PMT 1998; JIPMER 2001, 2002]

Solution. (c) For the lens u = −30 cm, f = 20 cm, hence by using 1/f = 1/v − 1/u ⇒ 1/20 = 1/v − 1/(−30) ⇒ v = 60 cm. The final image will coincide with the object if light ray falls normally on the convex mirror. From the figure it is seen that separation between lens and mirror is 60 − 10 = 50 cm.

Teacher's Note: Rays must hit the mirror normally, i.e. along radii: the mirror's centre of curvature sits at the lens image.

Exam Note: Lens image 60 cm; centre of curvature there.

Question T5. A convex lens of focal length 30 cm and a concave lens of 10 cm focal length are placed so as to have the same axis. If a parallel beam of light falling on convex lens leaves concave lens as a parallel beam, then the distance between the two lenses will be (a) 40 cm (b) 30 cm (c) 20 cm (d) 10 cm

Solution. (c) According to the figure the combination behaves as a plane glass plate (i.e., F = ∞). Hence by using 1/F = 1/f1 + 1/f2 − d/(f1f2) ⇒ 1/∞ = 1/30 + 1/(−10) − d/((30)(−10)) ⇒ d = 20 cm.

Teacher's Note: A parallel beam in and out is an afocal pair: separation = f1 + f2 = 30 − 10.

Exam Note: Afocal: d = f1 + f2 in magnitude.

Prism: Examples

Question 36. When light rays are incident on a prism at an angle of 45°, the minimum deviation is obtained. If refractive index of the material of prism is √2, then the angle of prism will be (a) 30° (b) 40° (c) 50° (d) 60°

Solution. (d) μ = sin i / sin(A/2) ⇒ √2 = sin 45° / sin(A/2) ⇒ sin(A/2) = (1/√2)/√2 = 1/2 ⇒ A/2 = 30° ⇒ A = 60°.

Teacher's Note: At minimum deviation the ray passes symmetrically, so μ = sin i / sin(A/2).

Exam Note: Use the minimum-deviation prism formula.

Question 37. Angle of minimum deviation for a prism of refractive index 1.5 is equal to the angle of prism. The angle of the prism is (cos 41° = 0.75) (a) 62° (b) 41° (c) 82° (d) 31°

Solution. (c) Given δm = A, then by using μ = sin[(A + δm)/2]/sin(A/2) ⇒ μ = sin A / sin(A/2) = 2 cos(A/2) {sin A = 2 sin(A/2) cos(A/2)} ⇒ 1.5 = 2 cos(A/2) ⇒ 0.75 = cos(A/2) ⇒ A/2 = 41° ⇒ A = 82°.

Teacher's Note: δm = A turns the prism formula into μ = 2 cos(A/2).

Exam Note: Apply sin A = 2 sin(A/2)cos(A/2).

Question 38. Angle of glass prism is 60° and refractive index of the material of the prism is 1.414, then what will be the angle of incidence, so that ray should pass symmetrically through prism (a) 38°61′ (b) 35°35′ (c) 45° (d) 53°8′

Solution. (c) Incident ray and emergent ray are symmetric when the prism is in minimum deviation position. Hence in this condition μ = sin i / sin(A/2) ⇒ sin i = μ sin(A/2) ⇒ sin i = 1.414 × sin 30° = 1/√2 ⇒ i = 45°.

Teacher's Note: Symmetric passage is the minimum-deviation condition, so i = e and r = A/2.

Exam Note: sin i = μ sin(A/2) = 0.707.

Question 39. A prism (μ = 1.5) has the refracting angle of 30°. The deviation of a monochromatic ray incident normally on its one surface will be (sin 48°36′ = 0.75) (a) 18°36′ (b) 20°30′ (c) 18° (d) 22°1′

Solution. (a) By using μ = sin i / sin A ⇒ 1.5 = sin i / sin 30° ⇒ sin i = 0.75 ⇒ i = 48°36′. Also from δ = i − A ⇒ δ = 48°36′ − 30° = 18°36′.

Teacher's Note: Normal entry gives r1 = 0, r2 = A; deviation is e − A.

Exam Note: Use μ = sin e / sin A.

Question 40. Angle of a prism is 30° and its refractive index is √2 and one of the surface is silvered. At what angle of incidence, a ray should be incident on one surface so that after reflection from the silvered surface, it retraces its path (a) 30° (b) 60° (c) 45° (d) sin−1√1.5

Solution. (c) This is the case when light ray is falling normally on the second surface. Hence by using μ = sin i / sin A ⇒ √2 = sin i / sin 30° ⇒ sin i = √2 × 1/2 ⇒ i = 45°.

Teacher's Note: To retrace its path the ray must hit the silvered face normally, so r2 = 0 and r1 = A.

Exam Note: Normal hit on mirror face: r1 = A.

Question 41. The refracting angle of prism is A and refractive index of material of prism is cot(A/2). The angle of minimum deviation is (a) 180° − 3A (b) 180° + 2A (c) 90° − A (d) 180° − 2A

Solution. (d) By using μ = sin[(A + δm)/2]/sin(A/2) ⇒ cot(A/2) = sin[(A + δm)/2]/sin(A/2) ⇒ cos(A/2)/sin(A/2) = sin[(A + δm)/2]/sin(A/2) ⇒ sin(90° − A/2) = sin[(A + δm)/2] ⇒ 90° − A/2 = (A + δm)/2 ⇒ δm = 180° − 2A.

Teacher's Note: Write cot(A/2) as cos(A/2)/sin(A/2) and compare sines with the minimum-deviation formula.

Exam Note: Convert cos(A/2) to sin(90° − A/2).

Question 42. A ray of light passes through an equilateral glass prism in such a manner that the angle of incidence is equal to the angle of emergence and each of these angles is equal to 3/4 of the angle of the prism. The angle of deviation is (a) 45° (b) 39° (c) 20° (d) 30°

Solution. (d) Given that A = 60° and i = e = (3/4)A = (3/4) × 60° = 45°. By using i + e = A + δ ⇒ 45° + 45° = 60° + δ ⇒ δ = 30°.

Teacher's Note: Equilateral prism means A = 60°; use i + e = A + δ directly.

Exam Note: Use i + e = A + δ.

Class 12 Mathematics: Pradeep's KL Gogia Solutions for Pradeep's KL Gogia Solutions Physics Chapter 13 Ray Optics Part 2

Download Pradeep's KL Gogia Solutions for Class 12

Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Physics Chapter 13 Ray Optics Part 2 tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Detailed Calculation Guides for Class 12

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 12 Physics?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 12 Physics. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 12 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 12 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 12 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 12 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.