Official Textbook Solutions: Class 12 Biology Chapter 11 Biotechnology Principles And Processes
Review structured textbook solutions for Class 12 Biology Chapter 11 Biotechnology Principles And Processes prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Chapter-wise Solutions for Biology: Chapter 11 Biotechnology Principles And Processes
Access the complete solution PDF for Class 12 Biology below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Short Answer Questions II
Question 1. List the steps involved in rDNA technology.
Solution.
Steps in rDNA technology:
i. Isolation of DNA. ii. Fragmentation of DNA by restriction endonucleases. iii. Isolation of the desired DNA fragments. iv. Amplification of the gene of interest. v. Ligation of the DNA fragment into a vector using DNA ligase. vi. Transfer of recombinant DNA into the host organism. vii. Culturing the host cell on a suitable medium on a large scale. viii. Extraction of the desired product. ix. Downstream processing of the products as finished products are ready for marketing.
Teacher's Note: The process runs from isolation of DNA through cutting, amplification, ligation, transformation and product recovery.
Exam Note: Write the steps in correct order.
Question 2. List the key tools used in recombinant DNA technology.
Solution.
The key tools used in recombinant DNA technology are:
i. Restriction enzymes ii. Polymerase enzyme iii. Ligase enzyme iv. Vectors v. Host organism/cell.
Teacher's Note: Key tools are restriction enzymes, polymerases, ligases, vectors and host cells.
Exam Note: List all five tools.
Question 3. Explain the action of the restriction endonuclease EcoRI.
Solution.
i. The recognition sequence shows palindrome character in which the sequence of base pairs read the same on both the DNA strands, i.e., same in 5′ → 3′ or 3′ → 5′ directions, e.g., 5′ — G A A T T C — 3′ 3′ — C T T A A G — 5′ ii. The restriction endonuclease acts on specified length of a DNA and binds to the DNA at the recognition sequence. iii. It cuts the opposite double helix of DNA in the sugar-phosphate backbones, at little away from the centre of the palindrome sites. iv. There are overhanging stretches called sticky ends on each strand, which form hydrogen bonds with their complementary cut counterparts. This stickiness of the ends facilitates the action of the enzyme DNA ligase.
Teacher's Note: EcoRI recognises a palindromic site and cuts both strands, leaving single-stranded sticky ends.
Exam Note: Mention the palindrome and staggered cut.
Question 4. a. What is EcoRI? What does ‘R’ represent in this? b. Explain its action.
Solution.
a. EcoRI is a restriction endonuclease, obtained from an E. coli bacterium. R represents the name of the strain.
b. It cuts the DNA between bases G and A on both the strands only when the sequence GAATTC is present in DNA.
Teacher's Note: EcoRI is from E. coli, with R denoting the strain, and it cuts between G and A on both strands.
Exam Note: R is the strain.
Question 5. Explain the process by which a bacterial cell can be made ‘competent’. Why is it essential to make bacterial cells ‘competent’ in recombinant DNA technology? OR How can be a host made competent? Explain the different methods.
Solution.
The cell is made competent by the following methods:
a. Chemical method The cell is treated with specific concentration of a divalent cation such as calcium
- to increase pore size in cell wall. The cells are incubated with recombinant DNA on ice, followed by placing them
- briefly at 42°C and then putting it back on ice. This is called heat shock treatment. The bacteria now take up the recombinant DNA.
b. Physical methods The physical methods include Micro-injection method: Recombinant DNA is directly injected into the nucleus
- of an animal cell. Biolistics or gene gun method: Cells are bombarded with high velocity micro-
- particles of gold or tungsten coated with DNA in plants.
Teacher's Note: Cells are made competent with calcium and heat shock, or by physical methods, since DNA cannot cross membranes alone.
Exam Note: Competence is needed to take up DNA.
Question 6. What is Ti plasmid? Name the organism where it is found. How does it help in genetic engineering?
Solution.
An extra-chromosomal DNA which delivers gene of interest into variety of plants and act as cloning vector is called Ti plasmid. They are present in Agrobacterium tumifaciens. Ti plasmid vectors are used for genetic transformation in many dicot plants. The tumour inducing (Ti) plasmid of Agrobacterium tumifaciens has been modified into a cloning vector which is no more pathogenic to the plants but is still able to use the mechanisms to deliver genes of interest into a variety of plants.
Teacher's Note: A plasmid from a plant pathogen carries T-DNA, which is modified to transfer useful genes into plants.
Exam Note: It is a modified plant gene carrier.
Question 7. Expand the following and mention one application of each: i. PCR ii. ELISA
Solution.
Expansion Application i. PCR Polymerase Chain Reaction Amplification of gene of ii. ELISA Enzyme Linked Immunosorbent Assay interest/In forensic study Diagnostic test for AIDS
Teacher's Note: PCR amplifies DNA, while ELISA detects antigens or antibodies, useful in diagnosis.
Exam Note: Expand both and give uses.
Question 8. Many copies of a specific gene of interest are required to study the detailed sequencing of bases in it. Name and explain the process that can help in developing large number of copies of this gene of interest.
Solution.
Polymerase Chain reaction (PCR). PCR is carried out in the following three steps:
(a) Denaturation
— The double-stranded DNA is denatured by subjecting it to high temperature of 95°C for 15 seconds. Each separated single stranded strand now acts as template for DNA synthesis.
(b) Annealing
— Two sets of primers are added which anneal to the 3′ end of each separated strand.
— Primers act as initiators of replication.
(c) Extension
— DNA polymerase extends the primers by adding nucleotides complementary to the template provided in the reaction.
— A thermostable DNA polymerase (Taq polymerase) is used in the reaction which can tolerate the high temperature of the reaction.
— All these steps are repeated many times to obtain several copies of desired DNA.
Teacher's Note: PCR amplifies a gene through denaturation, annealing and extension cycles, giving many copies for sequencing.
Exam Note: Name the three cycle steps.
Question 9. How can a bioreactor be made to function at optimal state in order to obtain a desired foreign gene product? Explain.
Solution.
A stirred-tank bioreactor is the most commonly used bioreactor. It comes with a curved base to facilitate the mixing of the reactor contents. The stirrer facilitates even mixing and oxygen availability throughout the bioreactor. The bioreactor has an agitator system, an oxygen delivery system and a foam control system, a temperature control system, pH control system and sampling port so that volumes of the cultures can be withdrawn periodically.
Teacher's Note: A stirred-tank bioreactor mixes contents evenly and allows control of temperature, pH and oxygen for best product yield.
Exam Note: Controlled conditions maximise yield.
Question 10. Name two commonly used bioreactors. State the importance of using a bioreactor.
Solution.
Two commonly used bioreactors are simple stirred tank bioreactor and sparged stirred tank bioreactor. A bioreactor is used for
i. processing large volumes of culture. ii. large scale production of recombinant proteins. iii. biologically converting raw materials into specific products.
Teacher's Note: Simple stirred-tank and sparged stirred-tank reactors process large culture volumes under controlled conditions.
Exam Note: Name two types and their advantage.
Question 11. a. List the three steps involved in Polymerase Chain Reaction (PCR). b. Name the source organism of Taq polymerase. Explain the specific role of this enzyme in PCR.
Solution.
a. The three steps involved in polymerase chain reaction (PCR): i. Denaturation of double stranded DNA (dsDNA) at high temperature. ii. Annealing of two sets of primers. iii. Extension of primers to form dsDNA by Taq polymerase and deoxynucleotides.
b. Source organism of Taq polymerase is the bacterium Thermus aquaticus. This enzyme is heat tolerant and repeatedly amplifies DNA at high temperatures.
Teacher's Note: PCR has denaturation, annealing and extension steps, and the polymerase comes from a heat-tolerant bacterium.
Exam Note: Name steps and the source organism.
Question 12. Why are genes encoding resistance to antibiotics considered useful selectable markers for E. coli cloning vector? Explain with the help of one example.
Solution.
Genes encoding resistance to antibiotics are considered useful selectable markers for E. coli cloning vector is explained using this example.
If a recombinant DNA bearing gene for resistance to an antibiotic (e.g., ampicillin) is transferred into E. coli cells, the host cells become transformed into ampicillin-resistant cells. If these transformed cells are spread on agar plates containing ampicillin, only transformants will grow, and the non-transformed recipient cells will die as they do not contain the gene for ampicillin resistance. Thus, transformed cells can be selected. The gene for ampicillin resistance, in this case, is a useful selectable marker.
Teacher's Note: An antibiotic resistance gene lets only transformed cells grow on antibiotic plates, so non-transformants are eliminated.
Exam Note: Resistance lets transformants survive selection.
Question 13. Write the steps you would suggest to be undertaken to obtain a foreign- gene-product.
Solution.
Recombinant DNA technology involves the following steps:
i. Isolation of DNA ii. Fragmentation of DNA by restriction endonucleases. iii. Isolation of a desired DNA fragment. iv. Amplification of the gene of interest. v. Ligation of the DNA fragment into a vector. vi. Insertion of recombinant DNA into the host. vii. Culturing the host cells on a suitable medium at a large scale. viii. Extraction of the desired gene product. ix. Downstream processing of the products as finished product, ready for marketing.
Teacher's Note: The procedure runs from DNA isolation and cutting, to ligation, transformation, expression and product purification.
Exam Note: Present steps in order.
Question 14. a. Explain the significance of ‘palindromic nucleotide sequence’ in the formation of recombinant DNA. b. Write the use of restriction endonuclease in the above process.
Solution.
a. Palindromic nucleotide sequence is the recognition (specific) sequence present both on the vector and on a desired or alien DNA for the action of the same (specific) restriction endonuclease to act upon. b. i. Every endonuclease inspects the entire DNA sequence for the palindromic recognition sequence. ii. On finding the palindrome, the endonuclease binds to the DNA. iii. It cuts the opposite strands of DNA in the sugar–phosphate backbone; a little away from the centre of the palindrome sites but between the same bases on both strands. iv. This results in the formation of single stranded overhanging stretches at the end of each strand called sticky ends. v. The sticky ends facilitate the action of the enzyme DNA ligase by readily forming hydrogen bonds with complementary strands.
Teacher's Note: The same palindromic site on vector and foreign DNA lets one enzyme cut both for joining.
Exam Note: Matching sites allow ligation.
Question 15. Describe the roles of heat, primers and the bacterium Thermus aquaticus in the process of PCR.
Solution.
Heat denatures or helps in separation of DNA into two strands.
- Primer–Enzyme DNA Polymerase extend the primers using the nucleotides provided in
- the reaction and the genomic DNA as template. Thermus aquaticus: It is the source of thermostable DNA polymerase
- or Taq polymerase.
Teacher's Note: Heat separates DNA strands, primers start synthesis, and the bacterial polymerase survives the temperature changes.
Exam Note: Explain each of the three roles.
Question 16. Explain three basic steps to be followed during genetic modification of an organism.
Solution.
The three basic steps are:
i. Identification of DNA with desirable genes. ii. Introduction of the identified DNA into the host. iii. Maintenance of introduced DNA in the host and transfer of the DNA to its progeny.
Teacher's Note: Genetic modification involves finding useful DNA, putting it into the host and maintaining it there.
Exam Note: Identify, introduce, maintain.
Question 17. How does β-galactosidase coding sequence act as a selectable marker? Explain. Why is it a preferred selectable marker to antibiotic resistance genes?
Solution.
When a recombinant DNA is inserted within the coding sequence of the enzyme β- galactosidase, it results into inactivation of the enzyme. The presence of a chromogenic substrate gives blue coloured colonies if the plasmid in the bacteria does not have an insert, whereas presence of insert do not produce any colour.
Selection of recombinants due to inactivation of antibiotics is a cumbersome procedure because it requires simultaneous plating on two plates having different antibiotics. Therefore, selectable markers are preferred for selection of recombinants.
Teacher's Note: Insertion inactivates the enzyme, so recombinants stay colourless on chromogenic medium, which makes selection easy.
Exam Note: Colour change identifies recombinants.
Question 18. “A very small sample of tissue or even a drop of blood can help determine paternity”. Provide a scientific explanation to substantiate the statement.
Solution.
i. DNA from all cells of an individual shows the same degree of polymorphism and therefore becomes a useful identification tool. ii. Polymorphs are heritable and the child inherits 50% of the chromosome from each parent. iii. With the help of PCR the small amount of DNA from blood can be amplified and be used in DNA finger printing to identify the paternity.
Teacher's Note: DNA polymorphism is inherited from both parents and PCR amplifies a tiny sample for fingerprinting, helping determine paternity.
Exam Note: Polymorphism plus PCR enables paternity tests.
Question 19. Answer the following question:
Why must a cell be made ‘competent’ in biotechnology experiments? How does calcium ion help in doing so?
Solution.
A cell must be made competent so that it can take up the hydrophilic DNA from the external medium. Divalent calcium ions increase the efficiency of DNA entering the cell through pores in the cell wall.
Q. State the role of ‘biolistic gun’ in biotechnology experiments. Ans. Biolistic gun is used to introduce alien DNA into the plant cell by bombarding them with high velocity microparticles (gold or tungsten coated with DNA).
Teacher's Note: Cells must be competent to take up hydrophilic DNA, and calcium ions improve its entry.
Exam Note: Competence enables DNA entry.
Question 20. Answer the following questons:
Identify the selectable markers in the diagram of E. coli vector shown above.
Solution.
a—gene for ampicillin resistance d—gene for tetracycline resistance
Teacher's Note: The labelled genes mark ampicillin and tetracycline resistance used for selection.
Exam Note: Markers identify transformants.
Question 21. Answer the following questions:
Name the selectable markers in the cloning vector pBR322? Mention the role they play.
Solution.
Selectable markers are ampR/ampicillin resistance genes and tetR/tetracycline resistance gene. They help in identifying and eliminating non-transformants/non- recombinants and selectively permitting the growth of the transformants/recombinants.
Q. Why is the coding sequence of an enzyme β-galactosidase is a preferred selectable marker in comparison to the ones named above?
Ans. This is because it is simpler and less cumbersome. In the presence of chromogenic substrate recombinants are colourless and non-recombinants are blue in colour.
Teacher's Note: Ampicillin and tetracycline resistance genes in the plasmid help identify and remove non-transformants.
Exam Note: Markers select transformed cells.
Question 22. A mixture of fragmented DNA was electrophoresed in agarose gel. After staining the gel with ethidium bromide, no DNA bands were observed. What could be the reason?
Solution.
The reasons that could be possible are as follows:
i. DNA sample that was loaded on the gel may have got contaminated with nuclease (exo- or endo- or both) and completely degraded. ii. Electrodes were put in opposite orientation in the gel assembly, i.e., anode towards the wells (where DNA sample is loaded). Since DNA molecules are negatively charged, they move towards anode and hence move out of the gel instead of moving into the matrix of gel. iii. Ethidium bromide was not added at all or was not added in sufficient concentration and so DNA was not visible. iv. After staining with Ethidium bromide it was not observed under UV
Teacher's Note: Possible causes are nuclease contamination degrading the DNA, or reversed electrodes making DNA run out of the gel.
Exam Note: Name contamination or wrong electrode orientation.
Question 23. (a) In pBR322, foreign DNA has to be introduced in tetR region. From the restriction enzymes given below, which one should be used and why? PvuI, EcoRI, BamHI (b) Give reasons, why the other two enzymes cannot be used.
Solution.
a. BamHI should be used, as restriction site for this enzyme is present in tetR region.
b. PvuI will not be used, as restriction site for this enzyme is present in ampR region (not in tetR). EcoRI will not be used, as restriction site for this enzyme is not present in selectable marker tetR.
Teacher's Note: The enzyme must cut inside the tetracycline gene region, so the one with a site there is chosen.
Exam Note: Choose the enzyme with a site in the marker.
Question 24. Prepare a flow chart in formation of recombinant DNA by the action of restriction endonuclease enzyme EcoRI.
Solution.
Steps in formation of recombinant DNA by action of restriction endonuclease enzyme EcoRI
Teacher's Note: Both DNAs are cut by EcoRI, giving matching sticky ends that ligase joins.
Exam Note: Show cut, sticky ends, joining, recombinant DNA.
Question 25. Name and explain the technique used for separating DNA fragments and making them available for biotechnology experiments.
OR
How are the DNA fragments separated and isolated for DNA fingerprinting? Explain.
Solution.
Separation and Isolation of DNA Fragments (Gel Electrophoresis)
▪ Gel electrophoresis is a technique for separating DNA fragments based on their size.
▪ Firstly, the sample DNA is cut into fragments by restriction endonucleases.
▪ The DNA fragments being negatively charged can be separated by forcing them to move towards the anode under an electric field through a medium/matrix.
▪ Commonly used matrix is agarose, which is a natural linear polymer of D-galactose and 3, 6-anhydro-L-galactose which is extracted from sea weeds.
▪ The DNA fragments separate-out (resolve) according to their size because of the sieving property of agarose gel. Hence, smaller the fragment size, the farther it will move.
A typical agarose gel electrophoresis showing migration of undigested (lane 1) and digested set of DNA fragments (lane 2 to 4)
▪ The separated DNA fragments are visualised after staining the DNA with ethidium bromide followed by exposure to UV radiation.
▪ The DNA fragments are seen as orange coloured bands.
▪ The separated bands of DNA are cut out and extracted from the gel piece. This step is called elution.
▪ The purified DNA fragments are used to form recombinant DNA which can be joined with cloning vectors.
Teacher's Note: Gel electrophoresis separates DNA fragments by size; smaller fragments travel farther.
Exam Note: Gel electrophoresis: size-based, anode, stain, elution.
Question 26. A recombinant DNA is formed when sticky ends of vector DNA and foreign DNA join. Explain how the sticky ends are formed and get joined.
OR
EcoRI is used to cut a segment of foreign DNA and that of a vector DNA to form a recombinant DNA. Show with the help of schematic diagrams.
i. The set of palindromic nucleotide sequence of base pairs the EcoRI will recognise in both the DNA segments. Mark the site at which EcoRI will act and cut both the segments.
ii. Sticky ends formed on both the segments where the two DNA segments will join later to form a recombinant DNA.
Solution.
The vector DNA and foreign DNA are cut by the same restriction enzyme, such as EcoRI, to form the same kind of sticky ends. Then these sticky ends are joined by the enzyme DNA ligase.
Steps in formation of recombinant DNA by action of restriction endonuclease enzyme EcoRI
Teacher's Note: The same enzyme gives complementary sticky ends, which base-pair and are sealed by DNA ligase.
Exam Note: Same enzyme, sticky ends, DNA ligase.
Question 27. Draw a schematic sketch of pBR322 plasmid and label the following in it:
a. Any two restriction sites.
b. ori and rop genes.
c. An antibiotic resistant gene.
Solution.
E. coli cloning vector pBR322 showing restriction sites (HindIII, EcoRI, BamHI, SalI, PvuII, PstI, ClaI), ori and antibiotic resistance genes (ampR and tetR). rop codes for the proteins involved in the replication of the plasmid.
Teacher's Note: pBR322 carries ori, rop, ampR, tetR and several unique restriction sites.
Exam Note: Label sites, ori, rop and ampR or tetR.
Question 28. How is the amplification of a gene sample of interest carried out using Polymerase Chain Reaction (PCR)?
OR
Suggest and describe a technique to obtain multiple copies of a gene of interest in vitro.
Solution.
PCR is carried out in the following three steps:
(a) Denaturation
— The double-stranded DNA is denatured by subjecting it to high temperature of 95°C for 15 seconds. Each separated single stranded strand now acts as template for DNA synthesis.
(b) Annealing
— Two sets of primers are added which anneal to the 3′ end of each separated strand.
— Primers act as initiators of replication.
(c) Extension
— DNA polymerase extends the primers by adding nucleotides complementary to the template provided in the reaction.
— A thermostable DNA polymerase (Taq polymerase) is used in the reaction which can tolerate the high temperature of the reaction.
— All these steps are repeated many times to obtain several copies of desired DNA.
Polymerase chain reaction (PCR)
Teacher's Note: PCR repeats denaturation, annealing and extension to copy DNA exponentially.
Exam Note: Three PCR steps: denaturation, annealing, extension with Taq.
Question 29. Draw a labelled sketch of sparged stirred-tank bioreactor. Write its application.
Solution.
Sparged stirred-tank bioreactor (sterile air is bubbled through a sparger at the bottom, and the impeller mixes the broth)
Application: Produces larger biomass leading to higher yields of desired protein.
Teacher's Note: In a sparged reactor, sterile air bubbles give better oxygen supply along with stirring.
Exam Note: Draw impeller, sparger, foam breaker; higher biomass.
Question 30. A schematic representation of polymerase chain reaction (PCR) up to the extension stage is given below. Answer the questions that follow:
Q. Name the process ‘a’.
Q. Identify ‘b’
Q. Identify ‘c’ and mention its importance in PCR.
Solution.
a—Denaturation process
b—Primers
c—Taq DNA polymerase. Taq polymerase is a thermostable enzyme which remains active during the high temperature required for extension of DNA.
Teacher's Note: Heat separates the strands, primers mark the start sites, and Taq polymerase builds new strands.
Exam Note: a denaturation, b primers, c Taq polymerase.
Question 31. Suggest and describe a technique to obtain multiple copies of a gene of interest in vitro.
Solution.
PCR is carried out in the following three steps:
(a) Denaturation
— The double-stranded DNA is denatured by subjecting it to high temperature of 95°C for 15 seconds. Each separated single stranded strand now acts as template for DNA synthesis.
(b) Annealing
— Two sets of primers are added which anneal to the 3′ end of each separated strand.
— Primers act as initiators of replication.
(c) Extension
— DNA polymerase extends the primers by adding nucleotides complementary to the template provided in the reaction.
— A thermostable DNA polymerase (Taq polymerase) is used in the reaction which can tolerate the high temperature of the reaction.
— All these steps are repeated many times to obtain several copies of desired DNA.
Polymerase chain reaction (PCR)
Teacher's Note: PCR repeats denaturation, annealing and extension to copy DNA exponentially.
Exam Note: Three PCR steps: denaturation, annealing, extension with Taq.
Question 32. Study the diagram given below and answer the questions that follow:
Q. Why have DNA fragments in band ‘D’ moved farther away in comparison to those in band ‘C’?
Q. Identify the anode end in the diagram.
Q. How are these DNA fragments visualised?
Solution.
DNA fragments in band ‘D’ are smaller in size than fragments in band ‘C’. Therefore, they moved faster and farther away.
The anode end is ‘B’.
The separated DNA fragments can be visualised by staining the DNA with ethidium bromide followed by exposure to UV radiation.
Teacher's Note: DNA is negatively charged, so it moves toward the anode; smaller pieces move farther.
Exam Note: Smaller fragments move farther; anode is B; ethidium bromide with UV.
Question 33. How is the coding sequence of β-galactosidase considered a better marker than the ones identified by you in the diagram? Explain.
Solution.
The insertion of rDNA into the coding sequence of an enzyme β-galactosidase leads to the inactivation of the enzyme. This is called insertional inactivation. The recombinants do not produce blue-coloured colonies in the presence of chromogenic substrate while the non-recombinants produce a blue colour. Thus, coding sequence of β-galactosidase is a better marker.
(In the diagram, a is the ampicillin resistance gene and d is the tetracycline resistance gene.)
Teacher's Note: Insertional inactivation of β-galactosidase gives a simple colour test for recombinants.
Exam Note: Insertional inactivation: white recombinants, blue non-recombinants.
Question 34. Explain the importance of (a) ori, (b) ampR and (c) rop in the E. coli vector shown below:
Solution.
a. ori: Ori is a sequence from where replication starts and any piece of DNA when linked to this sequence can be made to replicate within the host cells. It is also responsible for controlling the copy number of the linked DNA.
b. ampR: It is an antibiotic (ampicillin) resistance gene, used as a selectable marker to identify the host cells that have taken up the vector (transformants).
c. rop: It codes for the proteins involved in the replication of the plasmid.
Teacher's Note: ori starts replication, ampR is a selectable marker, and rop codes for replication proteins.
Exam Note: ori: replication; ampR: selection; rop: replication proteins.
Question 35. A plasmid DNA and a linear DNA (both of the same size) have one site for a restriction endonuclease. When cut and separated on agarose gel electrophoresis, plasmid shows one DNA band while linear DNA shows two fragments. Explain.
Solution.
It is because plasmid is a circular DNA molecule. When cut with enzyme, it becomes linear but does not get fragmented. Whereas, a linear DNA molecule gets cut into two fragments. Hence, a single DNA band is observed for plasmid while two DNA bands are observed for linear DNA in agarose gel.
Teacher's Note: One cut opens a circle into one linear piece, but splits a linear molecule into two.
Exam Note: One cut: circular gives one band, linear gives two.
Question 36. Rajesh was doing gel electrophoresis to purify DNA fragments. Given below is the sketch of the observations of the experiment performed by him.
a. At which end he would have loaded the samples and where?
b. Analyse the reason for different positions taken up by the DNA bands.
c. Elaborate the step he would have followed to visualise DNA bands.
Solution.
a. He would have loaded the samples near end A; in the wells.
b. The DNA fragments separate (resolve) according to their size through sieving effect provided by the agarose gel. Hence, the smaller the fragment size, the farther it moves.
c. After staining the DNA with ethidium bromide followed by exposure to UV radiations the DNA bands appear coloured.
Teacher's Note: Samples are loaded in wells at the cathode side; DNA moves toward the anode.
Exam Note: Load at A; size decides position; stain and use UV.
Free study material for Biology
Xam Idea Solutions for Class 12 Mathematics: Xam Idea Solutions Class 12 Biology Chapter 11 Biotechnology Principles And Processes Short Answer Questions II
Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 12 Biology Chapter 11 Biotechnology Principles And Processes Short Answer Questions II
Explore reliable mathematical solutions for Xam Idea Solutions Class 12 Biology Chapter 11 Biotechnology Principles And Processes Short Answer Questions II tailored for Class 12 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Mastering Core Concepts with Xam Idea Solutions
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Additional Study Materials for 2026
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the book for Class 12 Biology. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.