Solutions for Class 10 Science: Chapter 12 Electricity
Review structured textbook solutions for Class 10 Science Chapter 12 Electricity prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Practice Class 10 Science Solutions: Chapter 12 Electricity
Navigate directly to the solved Science textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
HOTS Higher Order Thinking Skills
Question 1. A battery E is connected to three identical lamps P, Q and R as shown in figure. Initially the switch S is kept open and the lamps P and Q are observed to glow with some brightness. Then switch S is closed. How will the brightness of glow of bulbs P and Q change? Justify your answer.
Solution.
The brightness of bulb P will increase and the brightness of bulb Q will decrease. This is because on closing S, bulbs Q and R will be in parallel and the combination will be in series with bulb P. Hence the total resistance of the circuit will decrease and the current flowing in the circuit will increase. Therefore, the glow of bulb P will increase. Also since bulbs Q and R will be in parallel in this case, the current gets divided and lesser current flows through Q and hence the glow of bulb Q will decrease.
Teacher's Note: On closing S, Q and R share current in parallel, so total resistance falls: P brightens, Q dims.
Exam Note: P brighter, Q dimmer.
Question 2. V–I graph for the metallic wires X and Y at constant temperature are as shown in figure. Assuming that the two wires have same length and same diameter, explain as to which of the two wires has higher resistivity and why?
Solution.
The slope I/V of the graph represents 1/R. Since the graph marked Y has lesser slope, it represents higher resistance.
Since the length and diameter of the two wires are the same, using the relation R = ρl/A, the resistivity of wire Y will be higher.
Teacher's Note: Slope I/V equals 1/R, so the flatter line Y means higher resistance and, for equal size, higher resistivity.
Exam Note: Y: lower slope, higher resistivity.
Question 3. Why is an ammeter likely to be burnt out if it connected in parallel in a circuit?
Solution.
The resistance of an ammeter is very low. If an ammeter is connected in parallel, the resultant resistance of the circuit decreases and excessive current passes through the instrument. Hence, the ammeter is likely to be burnt out.
Teacher's Note: An ammeter has very low resistance, so in parallel it draws large current and burns out.
Exam Note: Mention low resistance and heavy current.
Question 4. Current I flowing through a resistor results in dissipation of power P. By what percentage will the power dissipated in the resistor increase if the current through the resistor is increased by 50%? Justify your answer with the help of mathematical calculations?
Solution.
P = I2Rt
When I is increased by 50%, I becomes (3/2)I.
Hence P′ = ((3/2)I)2Rt = (9/4)I2Rt
Increase in power dissipation = (9/4)I2Rt − I2Rt = (5/4)I2Rt
Percentage increase = (increase/original) × 100 = ((5/4)I2Rt)/(I2Rt) × 100 = 125%
The power dissipated in the resistor will increase by 125%.
Teacher's Note: A 50 percent rise in current multiplies power by 2.25, an increase of 125 percent; the working here is garbled.
Exam Note: Use power proportional to current squared.
Question 5. What are the possible values of resistances which one can obtain by using resistor of values 2𝜴 , 3 𝜴 and 6𝜴? Justify your answer.
Solution.
The following combinations can be obtained:
(i) The individual resistances: 2 Ω, 3 Ω, 6 Ω
(ii) All in series: 11 Ω
(iii) All in parallel: 1 Ω
(iv) Three different mixed groupings: 2 Ω in series with (3 Ω || 6 Ω = 2 Ω) gives 4 Ω; 3 Ω in series with (2 Ω || 6 Ω = 1.5 Ω) gives 9/2 Ω; 6 Ω in series with (2 Ω || 3 Ω = 1.2 Ω) gives 36/5 Ω.
Teacher's Note: Series and parallel groupings of three resistors give many different resistance values.
Exam Note: List possible values from the combinations.
Question 6. Out of two electric bulbs of 50 W – 220 V and 100 W – 220 V, which one will glow brighter when they are connected (i) in series, and (ii) in parallel?
Solution.
The resistance of a bulb is R = V2/P. So the resistance of the 50 W bulb is double that of the 100 W bulb. When they are connected in series the current through both bulbs is the same. Hence the 50 W bulb will be brighter because P = I2R. In parallel, the voltage will be the same across both bulbs. So the 100 W bulb will be brighter because P = V2/R.
Teacher's Note: In series the higher-resistance 50 W bulb glows brighter; in parallel the 100 W bulb does.
Exam Note: Compare using current in series, voltage in parallel.
Question 7. Given n resistors each of resistance R, how will you combine them to get the (i) maximum; and (ii) minimum effective resistance? What is the ratio of maximum to minimum resistance?
Solution.
For maximum effective resistance, the resistors must be connected in series. If there are n resistors each of resistance R, then the maximum effective resistance = nR.
For minimum effective resistance, the resistors must be connected in parallel. So the minimum effective resistance = R/n.
Ratio of the maximum to minimum resistance = nR/(R/n) = n2 : 1.
Teacher's Note: For maximum resistance join the resistors in series; for minimum join them in parallel.
Exam Note: State the combinations and ratio.
Question 8. What is the resistance from A to B in the network shown in the figure?
Solution.
The point C is connected to B and the point D is connected to A. Therefore, three identical resistors, each having resistance R, are connected in parallel between A and B, and the equivalent circuit diagram is shown in the figure.
If the equivalent resistance is R′, then 1/R′ = 1/R + 1/R + 1/R = 3/R, or R′ = R/3.
Teacher's Note: Wires join C to B and D to A, putting all three resistors across the same two points in parallel.
Exam Note: R′ = R/3.
Question 9. Two students perform the experiment on series and parallel combinations of two given resistors R1 and R2 and plot the following V–I graphs (a) and (b). Which of the graphs is (are) correctly labelled in terms of the words ‘series’ and ‘parallel’? Justify your answer.
Solution.
(a) The slope V/I = resistance R. A larger resistance represents the series combination and a smaller resistance the parallel combination. Therefore the graph of greater slope represents the series combination, and hence graph (a) is correctly labelled.
(b) Here the slope I/V = 1/R, so the steeper line has the smaller resistance, which is the parallel combination. Hence graph (b) is also correctly labelled.
Teacher's Note: On a V–I graph the steeper line is larger R (series); on an I–V graph it is smaller R (parallel).
Exam Note: Both graphs are correctly labelled.
Question 10. Two students perform experiments on two given resistors R1 and R2 and plot the following V–I graphs. If R1 > R2, which of the two diagrams correctly represent the situation on the plotted curves? Justify your answer.
Solution.
As R1 > R2, figure (a) is correct. This is because R1 is greater, so the slope of the V–I graph (V/I) is greater in figure (a) and it is correctly labelled R1. In figure (b) the steeper line is labelled R2, which would mean R2 > R1.
Teacher's Note: In a V–I graph the larger resistance has the steeper line, which matches figure (a).
Exam Note: Figure (a); steeper V–I line is larger R.
Free study material for Science
Download Xam Idea Solutions for Class 10 Math PDF
Complete Math Solutions for Xam Idea Solutions Class 10 Science Chapter 12 Electricity HOTS Higher Order Thinking Skills
Access the complete chapter-wise PDF for Xam Idea Solutions Class 10 Science Chapter 12 Electricity HOTS Higher Order Thinking Skills. These structured Xam Idea Solutions solutions for Class 10 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Step-by-Step Mathematical Explanations
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Additional Study Materials for 2026
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.