CBSE Class 9 Science Advanced Physics Force and Laws of Motion Notes Set 09

Download Class 9 Physics Concept Summaries: CBSE Class 9 Science Advanced Physics Force and Laws of Motion Notes Set 09

Review targeted revision notes for Class 9 Physics with the CBSE Class 9 Science Advanced Physics Force and Laws of Motion Notes Set 09. Built according to official educational guidelines for the 2026-27 academic year, these downloadable summaries for Force and Laws of Motion support daily study and last-minute exam readiness.

Access Force and Laws of Motion Notes and Study Material

Access the complete concept summary PDF for Force and Laws of Motion below. Regular review of these targeted notes builds familiarity with complex Class 9 Physics themes and helps secure higher marks in final school evaluations.

These Class 9 Science advanced Physics notes cover the second part of the chapter Force and Newton's Laws of Motion: tension in strings, free body diagrams, motion of connected bodies (string, pulley and contact), the apparent weight of an object in a lift, and friction (static, sliding and rolling friction, the angle of repose and motion on an inclined plane).

Tension in Strings

Strings are assumed to be inextensible, i.e. they cannot be stretched, so the acceleration of masses connected through a string is always the same. Strings are assumed to be massless unless stated otherwise, so the tension is the same everywhere in the string.
If the string has mass, the tension at different points is different. It is maximum at the end at which the force is applied and minimum at the other end connected to the mass.

F T = constant A massless string F Minimum T Maximum T T not constant A string having mass

Tension in a massless string and in a string having mass

The tension on a body (or a point) is always directed outward along the string, i.e. away from the body. A tension always has a pulling action.

Free Body Diagrams

A system diagram is a sketch of all the objects involved in a situation. A free-body diagram (FBD) is a drawing in which only the object being analysed is drawn, with arrows showing all the forces acting on it.
(1) A free body diagram shows all the forces acting on one object.
(2) Forces that the object exerts on other objects do not appear, because they have no effect on the motion of the object itself.
(3) The object can be represented by a single dot or a simplified shape.
(4) Each force is an arrow; the arrow's direction shows the direction of the force and its relative length shows the magnitude.
(5) Forces of the same magnitude are drawn with about the same length; larger forces are longer and smaller forces shorter.
(6) For an object in motion, the direction of acceleration is marked on the FBD in the direction of the greater (net) force.

Fish hanging on a string System diagram Free body diagram T W Fish Ball resting on a hand System diagram Free body diagram Ball F W

Making free body diagrams

Motion of Bodies Connected by Strings

Two bodies \( m_1 \) and \( m_2 \) are placed on a horizontal frictionless plane and connected by a massless string. The mass \( m_1 \) is pulled by a force F, so the whole system moves with an acceleration a. Let the tension in the string be T.

m2 T m1 F a Massless string FBD for m₁ T F FBD for m₂ T

Motion of bodies connected by a string

For \( m_1 \): \( F - T = m_1 a \) ... (1) (F is the greater force as it is in the direction of a).
For \( m_2 \): \( T = m_2 a \) ... (2) (T is the only force on \( m_2 \)).
Adding (1) and (2): \( F = (m_1 + m_2)a \), so

\[ a = \dfrac{F}{m_1 + m_2}, \qquad T = \dfrac{m_2 F}{m_1 + m_2} \]

Motion of Bodies Connected by a String over a Light Pulley (Atwood's Machine)

Two masses \( m_1 \) and \( m_2 \) are connected by a string passing over a light pulley (the mass of the pulley is neglected). Both bodies move with the same acceleration a. Let \( m_2 > m_1 \); then \( m_2 \) moves down and \( m_1 \) moves up.

m1 m2 a a T T Atwood's machine FBD for m₁ T m1g FBD for m₂ T m2g

Motion of masses connected by a pulley

For \( m_1 \): \( T - m_1 g = m_1 a \) ... (1) (T > \( m_1 g \), as T is in the direction of a).
For \( m_2 \): \( m_2 g - T = m_2 a \) ... (2) (\( m_2 g \) > T, as \( m_2 g \) is in the direction of a).
Adding: \( (m_2 - m_1)g = (m_2 + m_1)a \), so

\[ a = \dfrac{(m_2 - m_1)g}{m_1 + m_2} \]

(Since \( a \ne g \), the two bodies are not freely falling bodies.) Putting this value in equation (1):

\[ T = \dfrac{2m_1 m_2 g}{m_1 + m_2} \]

Motion of Bodies in Contact

Two bodies of masses \( m_1 \) and \( m_2 \) are placed side by side touching each other. A push force F is applied on \( m_1 \) so that both move together with an acceleration a. At the place of contact there is a pair of action-reaction forces called normal contact forces, equal in magnitude and opposite in direction (Newton's third law).

m1 m2 F f a Motion of bodies in contact FBD for m₁ f F FBD for m₂ f

Motion of bodies in contact

For \( m_1 \): \( F - f = m_1 a \) ... (1). For \( m_2 \): \( f = m_2 a \) ... (2). Adding, \( F = (m_1 + m_2)a \), so

\[ a = \dfrac{F}{m_1 + m_2}, \qquad f = \dfrac{m_2 F}{m_1 + m_2} \]

Weight of an Object in a Lift

A weighing machine measures the normal force, not the true weight. If the normal force changes, the machine does not read the true weight but the normal force, which we call the apparent weight. Consider a girl of mass m standing in a lift.

R mg (a) Lift at rest / uniform velocity R′ mg a (b) Accelerating upward R″ mg a (c) Accelerating downward

Weight of an object in a lift

(1) Lift at rest or in uniform motion: the acceleration is zero, so the net force is zero. \( F_{net} = mg - R = 0 \), so \( R = mg \). Apparent weight = true weight.
(2) Lift moving up with uniform acceleration a: \( R' - mg = ma \), so \( R' = m(g + a) \). Apparent weight > true weight.
(3) Lift moving down with uniform acceleration a: \( mg - R'' = ma \), so \( R'' = m(g - a) \). Apparent weight < true weight.
If the rope of the lift breaks, the lift falls freely with \( a = g \), and the apparent weight is \( m(g - g) = 0 \): the weighing machine reads zero.

Friction

Friction is a force that opposes the movement between two surfaces in contact. Some important points:
(1) The magnitude of friction depends on the types of surfaces in contact; it is usually larger on rough surfaces and smaller on smooth surfaces.
(2) Friction is always parallel to the surface in contact.
(3) If an object is allowed to move on a surface, the more distance it travels on the surface, the less the friction.
(4) Friction is caused by the irregularities on the two surfaces in contact.
(5) Kinds of friction: static friction (two surfaces try to move across each other but not enough force is applied to cause motion), sliding friction (two surfaces slide across each other), rolling friction (one object rolls over another), air friction (air resistance, when air moves around an object) and viscous friction (objects move through water or other liquids).
(6) Friction increases if the two surfaces are pressed harder.
(7) Friction increases with weight: a heavy object presses harder on the floor, so the friction is larger.
(8) For hard surfaces, friction does not depend on the area of contact. This is not true if the surfaces are wet or soft: rubber is soft compared with the road, so wide rubber tyres have more friction than narrow tyres.

Static Friction

Static friction is the force exerted on an object at rest that prevents it from sliding. Its direction is opposite to the applied force (opposite to the direction in which the object tends to move). The maximum value of static friction is called the starting friction or limiting friction: the force that must be overcome to start a stationary object moving.
The law of static friction is

\[ f_s \le \mu_s N \]

where \( \mu_s \) is the coefficient of static friction (it depends only on the nature of the surfaces in contact) and N is the normal force. The limiting value is \( f_L = \mu_s N \). If the applied force F exceeds \( f_L \), the body begins to slide. If F is less than \( f_L \), then \( F = f_s \) and the body remains at rest.

Sliding (Kinetic) Friction

Sliding friction is the force exerted on an object in motion that opposes the motion of the object as it slides on another object. It is smaller than the limiting value of static friction, because it takes more force to break the interlocking between two surfaces than to keep them sliding once they are moving. Kinetic friction is also independent of the area of contact and nearly independent of the velocity.

Applied force Frictional force Static friction Kinetic friction

Variation of friction with applied force

The law of kinetic friction is

\[ f_k = \mu_k N \]

where \( \mu_k \) is the coefficient of kinetic friction. Always \( \mu_s > \mu_k \), and \( \mu_s \) or \( \mu_k \) has no unit, as each is a ratio of two forces.
The normal force on a horizontal plane is \( N = mg \), while on an inclined plane it is \( N = mg\cos\theta \), where \( \theta \) is the angle of the plane with the horizontal. Note that it is not motion but relative motion that the frictional force opposes.

Normal force N Weight mg (a) Horizontal plane: N = mg N mg θ (b) Inclined plane: N = mg cos θ

Normal forces on a horizontal plane and an inclined plane

Angle of Repose

If a body is placed on an inclined plane and the angle of inclination is gradually increased, at some angle \( \theta \) the body just starts sliding down. This angle is called the angle of repose. From the figure, \( f_L = mg\sin\theta \) ... (1) and \( R = mg\cos\theta \) ... (2). Dividing (1) by (2):

\[ \dfrac{f_L}{R} = \tan\theta = \mu_s \quad\Rightarrow\quad \tan\theta = \mu_s \]

θ R mg fL

Angle of repose

(1) If the angle of inclination \( \alpha \) of the plane is less than the angle of repose \( \theta \), the body remains at rest.
(2) If \( \alpha = \theta \), the body is just on the point of sliding (it will move uniformly once started).
(3) If \( \alpha > \theta \), the body accelerates down the plane. From the figure,

\[ F_{net} = mg\sin\alpha - f_k = mg\sin\alpha - \mu_k mg\cos\alpha \quad\Rightarrow\quad a = g(\sin\alpha - \mu_k\cos\alpha) \]

α R mg fk a

Block accelerating down a rough inclined plane

If there is no friction, the acceleration on the inclined plane is \( a = g\sin\alpha \), where \( \alpha \) is the angle of the incline with the horizontal.

Rolling Friction

The rolling motion of a wheel is a combination of spin (rotational) and linear (translational) motion. When one body rolls over the surface of another, the resistance to its motion is called rolling friction.
Rolling reduces friction significantly. Since rolling friction is smaller than sliding friction, sliding is replaced by rolling in most machines by using ball bearings.
Rolling friction increases with the deformation of the tyre or wheel. So the rolling friction of a rubber tyre is more than that of an iron wheel, because an iron wheel deforms negligibly while a rubber tyre deforms significantly.

Study Material and Revision Notes for Class 9 Physics Force and Laws of Motion

Download Chapter Summary: Class 9 Physics Force and Laws of Motion

Access structured revision notes for Force and Laws of Motion designed in alignment with the latest CBSE curriculum for Class 9 Physics. These summaries help clarify core themes and support effective daily study.

Concept Clarification for Force and Laws of Motion

Built using the official NCERT book for Class 9 Physics, these notes provide reliable academic guidance. Pair your summary review with our recommended NCERT solutions to master optimal problem-solving approaches.

Additional Study Resources for Class 9 Physics

Explore our broader library of printable assignments, chapter notes, and mock tests designed to support continuous revision and secure higher marks in CBSE assessments.

FAQs

Where can I download the latest PDF for CBSE Class 9 Science Advanced Physics Force and Laws of Motion Notes Set 09?

You can download the teacher prepared revision notes for CBSE Class 9 Science Advanced Physics Force and Laws of Motion Notes Set 09 from StudiesToday.com. These notes are designed as per 2026-27 academic session to help Class 9 students get the best study material for Physics.

Are these Physics notes for Class 9 based on the 2026 board exam pattern?

Yes, our CBSE Class 9 Science Advanced Physics Force and Laws of Motion Notes Set 09 include 50% competency-based questions with focus on core logic, keyword definitions, and the practical application of Physics principles which is important for getting more marks in 2026 CBSE exams.

Do these Class 9 notes cover all topic-wise concepts for Physics?

Yes, our CBSE Class 9 Science Advanced Physics Force and Laws of Motion Notes Set 09 provide a detailed, topic wise breakdown of the chapter. Fundamental definitions, complex numerical formulas and all topics of CBSE syllabus in Class 9 is covered.

How can I use CBSE Class 9 Science Advanced Physics Force and Laws of Motion Notes Set 09 for quick last-minute revision?

These notes for Physics are organized into bullet points and easy-to-read charts. By using CBSE Class 9 Science Advanced Physics Force and Laws of Motion Notes Set 09, Class 9 students fast revise formulas, key definitions before the exams.

Is there any registration required to download Class 9 Physics notes?

No, all study resources on StudiesToday, including CBSE Class 9 Science Advanced Physics Force and Laws of Motion Notes Set 09, are available for immediate free download. Class 9 Physics study material is available in PDF and can be downloaded on mobile.