CBSE Class 9 Science Advanced Chemistry Matter Around Us Notes Set 02

Chemistry Concept Notes for Class 9: Matter Around Us

Review targeted revision notes for Class 9 Chemistry with the CBSE Class 9 Science Advanced Chemistry Matter Around Us Notes Set 02. Built according to official educational guidelines for the 2026-27 academic year, these downloadable summaries for Matter Around Us support daily study and last-minute exam readiness.

Download Matter Around Us Revision Notes PDF

Navigate directly to the revision notes for Matter Around Us using the digital viewer below. Each summary is structured to highlight high-weightage sections, allowing students to instantly access critical definitions and focus on core exam topics.

These Class 9 Science advanced Chemistry notes continue Matter Around Us with the kinetic models of liquids and gases, surface tension, capillary action, viscosity, gas pressure and diffusion, and the interconversion of the states of matter: melting, freezing, boiling, evaporation, condensation, sublimation and latent heat.

Kinetic Model of a Liquid

In a liquid such as water or milk: (a) the molecules lie far apart from each other compared with a solid; (b) the intermolecular space is greater than in a solid; (c) the intermolecular force of attraction is not strong enough to bind the molecules to one position, so they move about more freely; (d) the molecular motion is irregular and random.

Surface Tension

Surface tension is an important property of liquids and is due to the intermolecular forces between liquid particles. A liquid surface feels stretched because of it.
A molecule in the bulk of a liquid is attracted equally on all sides, so the net pull on it is zero. A molecule at the surface is attracted only by the molecules below it, since there are none above. It therefore experiences a resultant downward pull into the liquid. This imbalance of forces puts the liquid surface under tension, which is called surface tension.

Effect of temperature: surface tension decreases with a rise in temperature, because the kinetic energy of the molecules increases and the intermolecular forces become less effective. Clothes are washed more efficiently in hot water than in cold water because of the lower surface tension of hot water.
Nature of the liquid: surface tension is a measure of the intermolecular attractive forces. When these forces are large, the surface tension is large.

Importance of Surface Tension

(i) Capillary action: when one end of a capillary tube is dipped in a liquid that wets glass, the liquid rises in the tube to a certain height and stops. The rise of a liquid in a capillary is called capillary action. It is due to the inward pull of surface tension on the liquid surface. Water below the ground rising to plants through roots, oil rising in the wick of a lamp and ink rising in blotting paper are examples.
(ii) Spherical shape of drops: liquid drops are nearly spherical. Surface tension tries to reduce the surface area of a liquid to the minimum, and a sphere has the minimum surface area for a given volume.

Viscosity

When a liquid flows through a tube, the layer in contact with the wall is stationary while the liquid at the centre has the highest velocity, and the layers in between move with a gradation of velocities. Each layer drags on the next, like the tubes of a telescope sliding past one another, and work must be done to keep the flow going. The internal friction or resistance that opposes the relative motion of the layers, that is, the flow of the liquid, is called viscosity.
Glycerine does not flow as easily as water or alcohol, so glycerine has more viscosity. The reason for viscosity is the cohesive molecular force between the molecules of the liquid.

Nature of the liquid: if the intermolecular forces are large, the viscosity is high. Water is more viscous than methyl alcohol because its intermolecular forces are greater.
Effect of temperature: the viscosity of a liquid decreases with a rise in temperature, because the average kinetic energy increases and the intermolecular forces are more easily overcome, so the liquid moves faster.

Importance of Viscosity

(i) Ships, aeroplanes and rockets are shaped so that the friction of water or air has the least effect on their velocity.
(ii) Lubricants for machines are chosen on the basis of viscosity, to reduce friction.
(iii) Viscosity helps in finding the pressure needed to send liquids such as petrol and water through pipelines.

Kinetic Model of a Gas

In a gas such as nitrogen or oxygen: (a) the molecules lie much farther apart than in a solid or a liquid; (b) the force of attraction between the molecules is negligible, so they are free to move within the space available; (c) the molecules move much faster than in liquids and so have much more kinetic energy; (d) they constantly collide with one another and with the walls of the vessel, and with each collision their direction and speed change; (e) the continuous bombardment of the walls by the molecules produces pressure.

Exertion of pressure: a solid exerts pressure only in the downward direction, a liquid exerts pressure downward as well as to the sides, and a gas exerts pressure in all directions (as in a balloon). This pressure is due to the bombardment of the particles on the walls of the container.
Homogeneous nature: gases have a similar composition in all parts, so they are homogeneous.
Liquefaction: gases can be liquefied by cooling and by applying pressure.
Diffusion: when a bottle of ammonia is opened in one corner of a laboratory, its pungent smell is soon felt all over the room; the smell of a perfume bottle opened in a drawing room spreads in the same way. All gases intermix with one another without any mechanical aid to form a homogeneous mixture. This property is called diffusion.

Uses of Gaseous Diffusion

(i) Separation of gases: when a mixture of gases diffuses, the lighter gases diffuse faster than the heavier gases, so by repeating the process the gases can be separated.
(ii) Relative densities and molecular masses of gases: Graham's law of diffusion can be used to determine these.

Interconversion of the States of Matter

If the temperature of a substance is changed, its physical state may change. A substance that has changed state can be brought back to the original state by changing the temperature, or, in the case of a gas, by changing the pressure.

1. Melting

When a solid is heated, its molecules absorb heat energy and their kinetic energy increases, and the temperature rises. At the melting stage, further heat does not raise the temperature. Instead, the heat energy is used up in weakening the intermolecular forces of attraction, which increases the intermolecular spaces and changes the arrangement of the solid to that of a liquid. The temperature at which a solid changes to a liquid at atmospheric pressure is called the melting point of the solid.
The graph below shows temperature against time as ice at −15°C changes to water and then to steam.

0100−15Temperature (°C)Time (minutes)iceice + water (melting)waterwater + steam (boiling)

Activity 1.4 (regelation): Press two pieces of ice together by hand. Under pressure the melting point decreases, so they melt at the contact surface; when the pressure is released they freeze into a single piece. This principle is called regelation.
Different solids have different melting points: ice melts at 0°C and wax at 63°C.

Factors affecting the melting point
(i) Effect of pressure. For solids that expand on melting, an increase in pressure increases the melting point, because pressure opposes expansion. Examples: paraffin wax, silver, gold, copper. For solids that contract on melting, an increase in pressure decreases the melting point, because pressure favours contraction. Examples: ice, cast iron, brass.
(ii) Effect of impurities. Adding impurities to a solid lowers its melting point. For example, Rose's metal, an alloy of tin, lead and bismuth, melts at 94.5°C, whereas the individual melting points are 327°C for lead, 231.9°C for tin and 271°C for bismuth.

2. Freezing

The conversion of a liquid to a solid is called freezing; it is the opposite of melting and is carried out by removing heat from the liquid. The temperature at which a liquid changes to a solid at atmospheric pressure is its freezing point, and the factors that affect the melting point also affect the freezing point.
A mixture of 3 parts of ice and 1 part of common salt is called a freezing mixture. It produces a lower temperature of about −21°C and is used to preserve perishable foods such as fish and meat.

Ice: A Unique Solid

Ice is less dense as a solid than water is as a liquid. Normally a liquid becomes denser as it freezes and its molecules pack closer together. When water freezes, however, its molecules form a latticework of hexagons that contain empty space, which makes the water expand by about 11% in volume. Ice therefore has fewer molecules per cubic centimetre than water. The density of ice is 0.917 g/cm3, whereas the maximum density of water is 1.00 g/cm3 at 3.98°C.
The expansion of ice weathers roads and parking lots: ice expands in crevices, opens cracks and eventually makes potholes. Because ice floats on water, about 90% of it stays below the surface.

3. Boiling

The process in which a liquid changes to the gaseous state by absorbing heat energy is called boiling. The boiling point is the constant temperature at which a liquid rapidly changes to a gas by absorbing heat at atmospheric pressure. It can also be defined as the temperature at which the vapour pressure of the liquid becomes equal to the atmospheric pressure.

Factors affecting the boiling point
(1) Pressure. The boiling point of a liquid increases with an increase in external pressure. This is why water boils below 100°C at high altitudes. In a pressure cooker the steam formed in the closed vessel raises the pressure above normal atmospheric pressure, so the water boils at a higher temperature and food cooks faster.
(2) Impurities. When a solid is dissolved in a liquid, the boiling point rises above the normal value. A common salt solution, for example, boils above 100°C.

Evaporation

Evaporation is the conversion of a liquid to vapour even without supplying heat energy. The surface molecules of a liquid have higher kinetic energy than the molecules in the bulk, so they break away from the attractive forces of the other molecules and escape as vapour. The change of a liquid into vapour at a temperature below its boiling point is called evaporation.
In evaporation, bubbles cannot form because the vapour pressure is less than the atmospheric pressure. In boiling, bubbles form and rise because the vapour pressure can overcome the atmospheric pressure.

Factors affecting the rate of evaporation
(1) Temperature: the rate increases with temperature. Wet clothes dry faster in summer than in winter.
(2) Surface area: the rate increases with surface area.
(3) Humidity of the air: humidity is the degree of dampness of the air, and higher humidity lowers the rate of evaporation. Clothes take longer to dry in the rainy season, and cereals do not dry easily then.
(4) Wind speed: the rate increases with wind speed. A wet floor dries faster with the ceiling fan on.
(5) Pressure: the rate increases when the gas pressure around the liquid decreases. If the vapour pressure of the surroundings rises to a certain level, evaporation slows down.

4. Condensation

The conversion of a gas to a liquid is called condensation. It is done by cooling the gas below a particular temperature: when heat is removed, the kinetic energy of the molecules decreases, the temperature falls and condensation follows. It can also be done by applying pressure, after cooling the gas below a certain temperature and then compressing it. LPG (liquefied petroleum gas) is a good example of a gas condensed to a liquid.

Effects of Condensation on Climate

Dew, fog and clouds are examples of condensation. During the day, water in water bodies evaporates until the air becomes saturated with water vapour. At night, when the temperature falls, the air becomes saturated. The temperature at which air becomes saturated with water vapour is called the dew point. On further cooling, some water vapour condenses into water droplets, which form dew. If condensation takes place on floating dust particles, fog or mist forms. In the upper atmosphere the condensed droplets appear as clouds.

Cooling Produced by Evaporation

Liquid molecules absorb energy from the surroundings to overcome the attractive forces and change to vapour. Since the surroundings lose energy, they become cooler. This explains (i) the cool sensation when alcohol is poured on the palm, (ii) why cotton clothes keep us cool in summer, (iii) the formation of water droplets on the outer surface of a glass of ice-cold water, where water vapour from the air condenses, and (iv) the cooling of water in earthen pots.

5. Sublimation

The phenomenon in which a substance on heating changes straight to the gaseous state without becoming a liquid, and on cooling changes back to the solid, is called sublimation. Iodine, naphthalene, solid carbon dioxide (dry ice) and ammonium chloride sublimate on heating.
Activity 1.5 (heating iodine): Heat a few crystals of iodine gently in a test tube without heating the upper part of the tube. The shiny grey crystals change directly into violet vapours without melting. The vapour deposits on the upper, cooler part of the tube as a grey powder, which is called the sublimate.

SolidLiquidGasheat (melt)cool (freeze)heat (boil)cool (condense)Sublimation: heatcool (solid deposited directly)

Think Deeper: Why do naphthalene balls placed in woollen clothes disappear even though the clothes are packed and not wet?
Explanation: Naphthalene changes directly to vapour without becoming a liquid, so the clothes do not get wet.

Difference Between Vapour and Gas

A substance that is a solid or a liquid under ordinary conditions but can exist in the gaseous state under specific conditions is called a vapour, for example water vapour or iodine vapour. A substance that is a gas under ordinary conditions remains a gas at room temperature and one atmosphere pressure, for example oxygen, nitrogen and hydrogen.

Latent Heat

The heat energy that has to be supplied to change the state of a substance is called its latent heat. Latent heat does not raise the temperature; the word latent means hidden. The heat supplied is used up in overcoming the forces of attraction between the particles during the change of state. It is of two types.
Latent heat of fusion (solid to liquid): the quantity of heat in joules needed to change 1 kg of a solid at its melting point into liquid, without any change in temperature. For ice it is 3.34 × 105 J/kg, the heat needed to change 1 kg of ice at 0°C into water at 0°C.
Latent heat of vaporisation (liquid to gas): the quantity of heat in joules needed to change 1 kg of a liquid at its boiling point into vapour, without any change in temperature. For water it is 22.5 × 105 J/kg.

Download CBSE Revision Notes: Class 9 Chemistry Matter Around Us

Download Chapter Summary: Class 9 Chemistry Matter Around Us

Explore reliable chapter overviews for Matter Around Us tailored for Class 9 learners. Use these structured points to grasp difficult themes and ensure solid preparation for upcoming assessments.

Concept Clarification for Matter Around Us

Cross-reference your comprehension with comprehensive NCERT solutions for Class 9 to ensure absolute clarity across all sub-topics in this chapter.

Additional Study Resources for Class 9 Chemistry

Follow up your revision by attempting the interactive online Chemistry MCQ test and practice worksheets for this chapter to verify your mastery. All platform resources are free to access.

FAQs

Where can I download the latest PDF for CBSE Class 9 Science Advanced Chemistry Matter Around Us Notes Set 02?

You can download the teacher prepared revision notes for CBSE Class 9 Science Advanced Chemistry Matter Around Us Notes Set 02 from StudiesToday.com. These notes are designed as per 2026-27 academic session to help Class 9 students get the best study material for Chemistry.

Are these Chemistry notes for Class 9 based on the 2026 board exam pattern?

Yes, our CBSE Class 9 Science Advanced Chemistry Matter Around Us Notes Set 02 include 50% competency-based questions with focus on core logic, keyword definitions, and the practical application of Chemistry principles which is important for getting more marks in 2026 CBSE exams.

Do these Class 9 notes cover all topic-wise concepts for Chemistry?

Yes, our CBSE Class 9 Science Advanced Chemistry Matter Around Us Notes Set 02 provide a detailed, topic wise breakdown of the chapter. Fundamental definitions, complex numerical formulas and all topics of CBSE syllabus in Class 9 is covered.

How can I use CBSE Class 9 Science Advanced Chemistry Matter Around Us Notes Set 02 for quick last-minute revision?

These notes for Chemistry are organized into bullet points and easy-to-read charts. By using CBSE Class 9 Science Advanced Chemistry Matter Around Us Notes Set 02, Class 9 students fast revise formulas, key definitions before the exams.

Is there any registration required to download Class 9 Chemistry notes?

No, all study resources on StudiesToday, including CBSE Class 9 Science Advanced Chemistry Matter Around Us Notes Set 02, are available for immediate free download. Class 9 Chemistry study material is available in PDF and can be downloaded on mobile.