Revision Notes for Class 9 Chemistry: Classification of Materials
Review targeted revision notes for Class 9 Chemistry with the CBSE Class 9 Science Advanced Chemistry Classification of Materials Notes Set 03. Built according to official educational guidelines for the 2026-27 academic year, these downloadable summaries for Classification of Materials support daily study and last-minute exam readiness.
Review Classification of Materials for Class 9 Chemistry
Access the complete concept summary PDF for Classification of Materials below. Regular review of these targeted notes builds familiarity with complex Class 9 Chemistry themes and helps secure higher marks in final school evaluations.
These Class 9 Science advanced Chemistry notes complete Classification of Materials with suspensions, colloidal solutions and their types, emulsions, the applications of colloids, and the methods used to separate solid-solid, solid-liquid, liquid-liquid, gas-gas and liquid-gas mixtures, including chromatography and Rf values.
Suspensions
A suspension is a heterogeneous mixture in which the solute particles do not dissolve but remain suspended throughout the bulk of the medium. Suspensions are formed only by substances that are insoluble in water.
Colloidal Solutions
Solutions in which the size of the particles lies between those of true solutions and suspensions are called colloidal solutions or colloids. Because the particles are small, these mixtures appear homogeneous, but they are actually heterogeneous. To distinguish them from true solutions, the term sol is used instead of solution.
Classification of Colloids by Interaction Between the Phases
(i) Lyophilic colloids: the dispersed phase has a great affinity for the dispersion medium, so it does not precipitate easily and the colloid is quite stable. The solid left after evaporating the medium can be brought back to the colloidal state by shaking it with the dispersion medium, so these colloids are reversible. Examples: gum, gelatin, starch, proteins and certain polymers in organic solvents. If water is the medium, the colloid is called hydrophilic.
(ii) Lyophobic colloids: the dispersed phase has little affinity for the dispersion medium. These sols are less stable and are easily precipitated by a small amount of electrolyte. Once precipitated they cannot easily be brought back to the colloidal state, so they are irreversible. Examples: gold sol and sulphur sol. If water is the medium, they are called hydrophobic.
Difference Between Lyophilic and Lyophobic Sols
| Property | Lyophilic sols | Lyophobic sols |
|---|---|---|
| Surface tension | Lower than that of the medium | Same as that of the medium |
| Viscosity | Much higher than that of the medium | Same as that of the medium |
| Reversibility | Reversible | Irreversible |
| Stability | More stable | Less stable |
| Visibility | Particles cannot be detected even under the ultramicroscope | Particles can be detected under the ultramicroscope |
| Migration | Particles may migrate in either direction or not migrate in an electric field | Particles migrate towards the cathode or the anode in an electric field |
| Action of electrolyte | A small quantity of electrolyte has little effect | Coagulation takes place |
| Hydration | Extensive hydration takes place | No hydration takes place |
Classification of Colloids by the Particles of the Dispersed Phase
| Multimolecular colloids | Macromolecular colloids | Associated colloids | |
|---|---|---|---|
| Formation | Aggregation of a large number of atoms or molecules, generally with diameters below 1 nm; e.g. sols of gold and sulphur | Molecules of large size, e.g. polymers such as rubber, nylon, starch and proteins | Aggregation of a large number of ions in solution, e.g. soap sol |
| Molecular mass | Not very high | Generally high | High |
| Binding / character | Atoms or molecules held together by weak van der Waals forces; usually lyophobic | Usually lyophilic | Molecules contain both lyophilic and lyophobic groups |
Emulsions
Colloidal sols in which both the dispersed phase and the dispersion medium are liquids are called emulsions.
(i) Oil-in-water (o/w) emulsions: oil is the dispersed phase and water is the medium.
(ii) Water-in-oil (w/o) emulsions: water is the dispersed phase and oil is the medium.
Emulsions are usually made by shaking oil and water vigorously, but emulsions of two pure liquids are usually not stable. Substances added to stabilise an emulsion are called emulsifiers or emulsifying agents; they stabilise it by lowering the surface tension of water. Milk is an oil-in-water emulsion in which liquid fat is dispersed in water and the milk proteins, mainly casein, act as the emulsifying agent.
Applications of Colloids in Everyday Life
(i) Medicines: most medicines are used in colloidal form, which is more easily assimilated because of the large surface area and so is more effective. Argyrol is a silver sol used as an eye lotion; colloidal antimony is used to cure kala-azar; colloidal gold is used as an intramuscular injection; milk of magnesia, an emulsion, is used as an antacid.
(ii) Food articles: many foods are colloidal, such as milk, butter, ice cream, fruit juices and halwa.
(iii) Fog, mist and clouds: on winter nights the moisture in the air condenses on dust particles to form fine droplets of colloidal size that float as fog or mist. Clouds are aerosols of small water droplets suspended in air; in the cold upper atmosphere they join into bigger drops that fall as rain. Rain is also caused when two oppositely charged clouds meet.
(iv) Artificial rain: spraying electrified or oppositely charged colloidal dust or sand particles over a cloud neutralises the colloidal water particles, which coagulate into bigger drops and fall as rain. Throwing common salt on the clouds also works, because salt is an electrolyte and coagulates the water particles.
(v) Formation of a delta: river water carries charged colloidal particles of clay, sand and other materials. Sea water holds many dissolved electrolytes, which coagulate these particles when river water meets the sea. The particles settle at that point, the river bed rises, the water changes its course and a delta forms in time. It is called a delta because the heap has the shape of the Greek letter Δ (delta); a delta is formed by the silting of the estuary.
(vi) Blue colour of the sky: it is due to the scattering of light by colloidal dust particles in the air (Tyndall effect). By Rayleigh scattering, light is scattered when the particle diameter is smaller than the wavelength of the light. Blue light has a short wavelength in sunlight, so it is scattered strongly and the sky looks blue. Sea water looks blue for a similar reason, from the scattering of light by colloidal impurities.
(vii) Tail of a comet: it is seen as a Tyndall cone because of the scattering of light by the tiny solid particles left by the comet in its path.
(viii) Blood: blood is a colloidal solution of an albuminoid. Bleeding stops on applying ferric chloride solution because the blood coagulates and forms a clot.
(ix) Cleansing action of soap: soap solution is colloidal. It removes dirt either by adsorption or by emulsifying the greasy matter sticking to the cloth.
(x) Smoke screen: in warfare, smoke screens are colloidal dispersions of certain substances (for example titanium oxide) in air.
Separation of Mixtures
Many mixtures contain a useful substance mixed with unwanted material, so chemists have developed several methods of separation. The method used depends on what is in the mixture, on the properties of the substances, and on whether they are solids, liquids or gases.
Separation of Solid-Solid Mixtures
(1) Solvent extraction uses the solubility of one component in a solvent. Sulphur dissolves in carbon disulphide (CS2) and sand does not, so a sulphur-sand mixture can be separated.
(2) Magnetic separation uses the magnetic property of one component. Iron ore (or iron filings) is attracted by a magnet and sand is left behind.
(3) Gravity method uses the difference in densities. In a mixture of sand and chalk powder in water, sand being heavier sinks and chalk powder floats.
(4) Fractional crystallisation uses the difference in solubility of the components in the same solvent. For a mixture of potassium nitrate and sodium chloride, the hot aqueous solution is cooled; the more soluble potassium nitrate stays in solution and the less soluble sodium chloride crystallises out first.
Think Deeper: A mixture contains two components A and B whose solubilities in water near the boiling point are 10 g per 100 mL and 2 g per 100 mL respectively. How will you separate A and B?
Explanation: By fractional crystallisation. When the saturated hot solution is cooled, the less soluble component B crystallises out first and the more soluble component A stays in the mother liquor.
Separation of Solid-Liquid Mixtures
(1) Sedimentation and decantation use the high density of an insoluble solid. In a mixture of sand and water, the heavier sand settles at the bottom (sedimentation) and the clear liquid is slowly transferred to another container (decantation).
(2) Filtration separates an insoluble solid from a soluble component in a given solvent. In a mixture of naphthalene and urea, urea dissolves in water and naphthalene does not; urea is recovered from the filtrate by evaporating the water.
Sometimes a hot solution must be filtered. If the water-soluble component is appreciably soluble in hot water but only sparingly soluble in cold water, the hot solution is filtered through a fluted filter paper, to avoid crystallisation during filtration and to remove suspended impurities. For a large volume, a hot-water funnel is used, whose jacket keeps the solution hot and prevents crystals forming in the funnel and its stem. A mixture of anthracene and benzoic acid is separated by dissolving it in hot water and filtering the hot solution: anthracene stays on the filter paper as residue and benzoic acid crystallises from the filtrate on cooling.
When filtration is very slow, it is carried out under reduced pressure with a Buchner funnel and a water suction pump.
Separation of Liquid-Liquid Mixtures
(1) Vacuum distillation (distillation under reduced pressure) is used for liquids that decompose on heating to their boiling point. At reduced pressure the boiling point of a liquid is lowered, so the liquid distils at a lower temperature.
(2) Steam distillation is used to separate and purify organic compounds (solid or liquid) from non-volatile impurities. It applies only to compounds that are volatile in steam, insoluble in water, have a vapour pressure of about 10–15 mm Hg at 373 K and contain non-volatile impurities, such as essential oils, nitrobenzene and chlorobenzene.
Think Deeper: How will you separate a mixture of o-nitrophenol and p-nitrophenol?
Explanation: By steam distillation. The volatile o-nitrophenol distils over with the water, while the non-volatile p-nitrophenol remains in the flask.
Separation of Gas-Gas Mixtures
(1) Diffusion uses differences in the densities of the gases: the gas of lower molecular mass diffuses faster. For example, hydrogen and methane, or helium and sulphur dioxide.
(2) Dissolution in a suitable solvent uses differences in solubility. In a mixture of carbon dioxide and carbon monoxide, CO2 dissolves in potassium hydroxide solution and CO is left. In a mixture of ammonia and nitrogen, ammonia dissolves in water and nitrogen does not.
(3) Preferential liquefaction uses differences in ease of liquefaction. In a mixture of ammonia and hydrogen, ammonia liquefies under high pressure and hydrogen is left behind.
(4) Fractional evaporation uses differences in boiling points. When air is liquefied and then allowed to evaporate, nitrogen with the lower boiling point boils off first and oxygen with the higher boiling point remains.
Separation of Liquid-Gas Mixtures
(1) Heating uses the decrease in solubility of a gas with rise in temperature. On slight heating, below the boiling point of the liquid, the dissolved gas escapes; this is how dissolved oxygen is removed from water.
(2) Lowering the pressure uses the decrease in solubility of a gas when the pressure falls. When a soda water bottle is opened, the pressure inside decreases and carbon dioxide fizzes out.
Chromatography
Chromatography is a special method applicable to all types of mixtures. The name comes from the Greek word chroma, meaning colour, because it was first used to separate coloured substances found in plants. In chromatography the stationary phase is either a solid or a tightly bound liquid on a solid support, and the mobile phase is either a liquid or a gas.
| Type of chromatography | Mobile / stationary phase | Uses |
|---|---|---|
| Adsorption (column) chromatography | Liquid / solid | Large-scale separations |
| Thin layer chromatography (TLC) | Liquid / solid | Qualitative analysis (identification and characterisation of organic compounds) |
| High performance liquid chromatography (HPLC) | Liquid / solid | Qualitative and quantitative analysis |
| Gas liquid chromatography (GLC) | Gas / liquid | Qualitative and quantitative analysis |
| Paper (partition) chromatography | Liquid / liquid | Qualitative and quantitative analysis of polar organic compounds (sugars, amino acids) and inorganic compounds |
Depending on the principle, chromatography is of two kinds.
(a) Adsorption chromatography. It is based on the differential adsorption of the components of a mixture on a suitable adsorbent such as silica gel or alumina. Since some compounds are adsorbed more strongly than others, they travel through the column at different rates and get separated. It is of two types: column chromatography and thin layer chromatography.
Rf value: \[ R_f = \frac{\text{distance travelled by the compound (X)}}{\text{distance travelled by the solvent (Y)}} \]Since the solvent front always moves faster than the compounds on a TLC plate, Rf values are usually decimal fractions.
(b) Partition chromatography. Paper chromatography works on the principle of partition: continuous differential partitioning of the components of the mixture between the stationary and the mobile phases.
Think Deeper: Name the method most suitable for separating each of the following: (a) oxygen from liquid air, (b) red blood cells from plasma, (c) petrol and kerosene from crude oil, (d) coffee grains from coffee solution, (e) pieces of steel from engine oil, (f) amino acids from a fruit juice solution, (g) ethanol and ether.
Explanation: (a) fractional distillation; (b) centrifugation; (c) fractional distillation; (d) filtration; (e) magnetic separation; (f) chromatography; (g) fractional distillation.
Free study material for Science
Classification of Materials Concepts and Summary for Class 9 Chemistry
Download Chapter Summary: Class 9 Chemistry Classification of Materials
Explore reliable chapter overviews for Classification of Materials tailored for Class 9 learners. Use these structured points to grasp difficult themes and ensure solid preparation for upcoming assessments.
Concept Clarification for Classification of Materials
Each chapter summary is structured around standard CBSE textbooks, allowing students to check their understanding and clarify complex ideas early in their revision.
Additional Study Resources for Class 9 Chemistry
Wrap up your chapter revision by testing your knowledge against standard question formats. Everything on our platform is provided free of charge.
FAQs
You can download the teacher prepared revision notes for CBSE Class 9 Science Advanced Chemistry Classification of Materials Notes Set 03 from StudiesToday.com. These notes are designed as per 2026-27 academic session to help Class 9 students get the best study material for Chemistry.
Yes, our CBSE Class 9 Science Advanced Chemistry Classification of Materials Notes Set 03 include 50% competency-based questions with focus on core logic, keyword definitions, and the practical application of Chemistry principles which is important for getting more marks in 2026 CBSE exams.
Yes, our CBSE Class 9 Science Advanced Chemistry Classification of Materials Notes Set 03 provide a detailed, topic wise breakdown of the chapter. Fundamental definitions, complex numerical formulas and all topics of CBSE syllabus in Class 9 is covered.
These notes for Chemistry are organized into bullet points and easy-to-read charts. By using CBSE Class 9 Science Advanced Chemistry Classification of Materials Notes Set 03, Class 9 students fast revise formulas, key definitions before the exams.
No, all study resources on StudiesToday, including CBSE Class 9 Science Advanced Chemistry Classification of Materials Notes Set 03, are available for immediate free download. Class 9 Chemistry study material is available in PDF and can be downloaded on mobile.