CBSE Class 9 Science Advanced Chemistry Atomic Structure Notes Set 02

Revision Notes for Class 9 Chemistry: Atomic Structure

Review targeted revision notes for Class 9 Chemistry with the CBSE Class 9 Science Advanced Chemistry Atomic Structure Notes Set 02. Built according to official educational guidelines for the 2026-27 academic year, these downloadable summaries for Atomic Structure support daily study and last-minute exam readiness.

Review Atomic Structure for Class 9 Chemistry

Navigate directly to the revision notes for Atomic Structure using the digital viewer below. Each summary is structured to highlight high-weightage sections, allowing students to instantly access critical definitions and focus on core exam topics.

These Class 9 Science advanced Chemistry notes continue Atomic Structure with isotopes, isotones, isobars and mirror nuclei, average atomic mass, the uses of radioactive isotopes, the electromagnetic spectrum, Planck's quantum theory, the hydrogen spectrum and the Rydberg formula, quantum numbers and the rules for filling electrons.

Isotopes

Two atoms of the same element contain the same number of protons but differ in the number of neutrons. Their electrons, protons and neutrons are arranged in the same way, so they have identical chemical properties. Elements showing similar chemical properties but different masses show isotopy. The commonest hydrogen isotope has no neutron; deuterium has one neutron and tritium has two. Isotopes are atoms of the same element having the same atomic number but different mass numbers.

Protium (¹H)Deuterium (²H)Tritium (³H)1 proton (red), 1 electron (blue), neutrons (grey): 0, 1 and 2
ElementNumber of isotopesIsotopes
HydrogenThree11H, 21H, 31H
CarbonThree126C, 136C, 146C
OxygenTwo (in this table)168O, 188O
ChlorineTwo3517Cl, 3717Cl
PotassiumTwo (in this table)3919K, 4019K

Think Deeper: How do we know that isotopes exist?
Explanation: They were first discovered with a mass spectrometer, first built by Francis Aston in 1919, which compared the relative masses of atoms accurately for the first time. In a vacuum, the vapour of an element is bombarded with electrons, so atoms lose an electron and form positive ions. An electric field accelerates the ions and a magnetic field deflects them; lighter ions are deflected more than heavier ones, so ions of different masses are separated and identified. A detector counts each kind of ion, giving the percentage abundance of each isotope. Chlorine gives two peaks, mass 35 (75%) and mass 37 (25%).

3537³⁵Cl (75%)³⁷Cl (25%)Mass numberAbundance (%)

Characteristics of Isotopes

(1) They have the same atomic number, so the same number of electrons, the same electronic configuration and the same chemical properties.
(2) They have different mass numbers, so their physical properties (melting point, boiling point, density) differ.
(3) They have the same number of protons.
(4) They have different numbers of neutrons.

Uses of Isotopes

(1) Some isotopes are radioactive and are used to treat cancer and other diseases. (2) Carbon-14 (146C) is used to find the age of historical and geological material (radiocarbon dating). (3) Isotopes of hydrogen, oxygen, nitrogen and carbon are used to study the mechanism of organic reactions.

Isotones

Isotones are atoms of different elements with different numbers of protons (and electrons) but the same number of neutrons. For example, 2311Na (11 protons, 12 neutrons) and 2412Mg (12 protons, 12 neutrons) both have 12 neutrons. Radium (226Ra) and actinium (227Ac) both have 138 neutrons yet behave differently, because their numbers of protons differ.

Isobars

Isobars (Greek iso = same, bar = weight) are atoms with different atomic numbers but the same mass number. All the properties of an element depend on its atomic number; atoms with the same atomic number are atoms of the same element. Argon-40 (18 protons, 22 neutrons), potassium-40 (19 protons, 21 neutrons) and calcium-40 (20 protons, 20 neutrons) are isobars.
Characteristics of isobars: (1) the same mass number; (2) different atomic numbers; (3) different numbers of protons; (4) different electronic configurations; (5) different numbers of valence electrons; (6) different chemical properties.

Mirror Nuclei

Mirror nuclei have the same mass number but the proton and neutron numbers interchanged: 74Be (Z = 4, N = 3) and 73Li (Z = 3, N = 4).

Average Atomic Mass

Atomic masses are often fractions; the atomic mass of chlorine is 35.5. This is because chlorine exists as two isotopes, 35Cl (75%) and 37Cl (25%). \[ \text{average atomic mass} = \frac{\text{total mass}}{\text{total moles}} = \frac{n_1m_1 + n_2m_2 + \cdots}{n_1 + n_2 + \cdots} \] For chlorine: \( \frac{75 \times 35 + 25 \times 37}{100} = 35.5\ \text{u} \).
Example: A sample of oxygen contains 16O and 18O with average atomic mass 16.2 amu. Find the percentage of each. Let 16O be x%. Then \( 16.2 = \frac{16x + 18(100 - x)}{100} \), so 1620 = 1800 − 2x and x = 90. 16O is 90% and 18O is 10%.

Uses of Radioactive Isotopes

1. Medicine: Co-60 for cancer treatment; Na-24 for studying blood circulation; I-131 for the thyroid; Fe-59 for locating brain tumours; radiographs of castings and teeth.
2. Industry: detecting leaks in water and oil pipelines; studying wear and tear, plastics and alloys; measuring thickness.
3. Agriculture: C-14 to study the kinetics of photosynthesis in plants; P-32 to find which phosphate fertiliser suits a given soil and crop.
4. Scientific research: K-40 to find the age of meteorites.
5. Tracers: a very small quantity of a radioisotope present in a specimen is a tracer, used to study complex biochemical reactions, to detect cracks and blockages, and to trace sewage or silt in the sea.
6. Geology and archaeology: dating ancient and lunar rocks using uranium; dating archaeological and biological specimens using C-14.

Spectrum

When light passes through a prism it splits into its components of different wavelengths. The arrangement of the components according to wavelength is called a spectrum, and the instrument used to observe it is a spectroscope. The electromagnetic spectrum is the arrangement of all types of electromagnetic radiation by increasing (or decreasing) wavelength or frequency. Wavelength increases in the order: cosmic rays < γ-rays < X-rays < UV rays < visible < IR rays < micro waves < radio waves. The visible spectrum runs from violet (about 380–430 nm) through indigo, blue, green, yellow, orange to red (about 650–760 nm).

Cosmic raysγ-raysX-raysUltravioletVisibleInfraredMicro wavesRadio wavesWavelength increasesFrequency and energy decrease from left to right.

White light has all wavelengths, giving a continuous spectrum, as from an incandescent bulb. The light from the atoms of a gas in a discharge tube gives a line spectrum: discrete lines of different colours. According to Rutherford's model the spectrum of an atom should be continuous, but the observed spectrum is not, so Bohr, in 1913, overcame the limitation with a model based on Planck's quantum theory.

Planck's Quantum Theory

At the end of the 19th century matter and energy were thought to be separate: matter has mass and a definite position, while energy (electromagnetic radiation) has no mass and no definite position, and matter could absorb or emit any amount of energy. In 1901 Max Planck, studying the radiation from heated solids, concluded that energy is absorbed or radiated in small packets called quanta, each of size \( h\nu \), where h = Planck's constant = 6.625 × 10−34 J s and ν is the frequency. This shows the particle nature of energy.
The total energy emitted or absorbed is a whole-number multiple of the quantum: E = n hν (n = 1, 2, 3, ...), that is hν, 2hν, 3hν but not 0.5 hν or 1.2 hν. Since \( \nu = c/\lambda \), \[ E = h\nu = \frac{hc}{\lambda} \] A wave of higher frequency (lower wavelength) is more energetic: violet light has more energy than red light.
Example: Find the frequency and energy of a photon of wavelength 6000 Å. \( \nu = \frac{c}{\lambda} = \frac{3 \times 10^{8}}{6000 \times 10^{-10}} = 5 \times 10^{14}\ \text{s}^{-1} \). \( E = h\nu = 6.625 \times 10^{-34} \times 5 \times 10^{14} = 3.3125 \times 10^{-19}\ \text{J} \).

Atomic Spectrum of Hydrogen

The spectrum of hydrogen is obtained when the radiation from hydrogen gas at low pressure in a discharge tube is examined with a spectroscope. It is a line spectrum of many sharp lines, each with a particular wavelength, grouped into five series named after their discoverers: (i) Lyman series: ultraviolet; (ii) Balmer series: visible; (iii) Paschen series, (iv) Brackett series and (v) Pfund series: infrared.
Balmer (1885) gave for the visible lines (Hα, Hβ, Hγ, ...): \[ \bar{\nu} = \frac{1}{\lambda} = R\left(\frac{1}{2^2} - \frac{1}{n^2}\right),\quad n = 3, 4, 5, \ldots \] where R = 109677 cm−1 is the Rydberg constant. Rydberg's general formula for all series is \[ \bar{\nu} = \frac{1}{\lambda} = R\left(\frac{1}{n_1^2} - \frac{1}{n_2^2}\right),\quad n_2 > n_1 \]

Seriesn1n2Region
Lyman12, 3, 4, ...Ultraviolet
Balmer23, 4, 5, ...Visible
Paschen34, 5, 6, ...Infrared
Brackett45, 6, 7, ...Infrared
Pfund56, 7, 8, ...Infrared

Example: Find the wavelength of the light emitted when the electron in a hydrogen atom drops from n = 4 to n = 2.
\( \bar{\nu} = 109677\left(\frac{1}{2^2} - \frac{1}{4^2}\right) = 20564.4\ \text{cm}^{-1} \), so \( \lambda = \frac{1}{20564.4}\ \text{cm} = 4.86 \times 10^{-5}\ \text{cm} = 486\ \text{nm} \), a blue-green line in the visible (Balmer) region.

Orbitals and Quantum Numbers

An orbital is the region around the nucleus in which the probability of finding the electron is maximum. Orbitals differ in size, shape and orientation in space. The numbers that describe these are quantum numbers: the principal (n), azimuthal (l) and magnetic (m) quantum numbers define an orbital; the spin quantum number (s) describes the spin of the electron about its own axis.

1. Principal quantum number (n). It gives the average distance of the electron from the nucleus (the size of the electron cloud), the energy level of the electron, and the maximum number of electrons in the shell, 2n2.
2. Azimuthal (angular momentum) quantum number (l). For a given n, l has all integer values from 0 to (n − 1); each value is a sub-shell: l = 0, 1, 2, 3 are s, p, d, f. So the number of sub-shells in a shell equals n. The energy order within a shell is s < p < d < f. The shapes are: s spherical, p dumb-bell, d double dumb-bell, f complex.

nl valuesSub-shells
101s
20, 12s, 2p
30, 1, 23s, 3p, 3d
40, 1, 2, 34s, 4p, 4d, 4f

3. Magnetic quantum number (m). It gives the number of permitted orientations of a sub-shell. For a given l, m runs from −l through 0 to +l, and each value is one orbital: s (l = 0) has 1 orbital; p (l = 1), m = −1, 0, +1, has 3 orbitals; d (l = 2), m = −2 to +2, has 5 orbitals; f (l = 3), m = −3 to +3, has 7 orbitals. It explains the splitting of spectral lines in a magnetic field (Zeeman effect).
4. Spin quantum number (s). An electron also spins about its own axis, clockwise or anticlockwise, so s has only two values, +1/2 and −1/2, shown as arrows pointing in opposite directions. It is independent of the other three quantum numbers.

Rules for Filling Electrons

Pauli's exclusion principle: no two electrons in an atom can have the same set of all four quantum numbers. So an orbital holds at most two electrons, and if it holds two, they have opposite spins (paired).
Aufbau principle: in the ground state, orbitals are filled in order of increasing energy: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. The lower the value of (n + l), the lower the energy of the orbital; if two orbitals have the same (n + l), the one with the lower n has the lower energy.
Hund's rule of maximum multiplicity: in a sub-shell with several degenerate (equal-energy) orbitals (p, d, f), electron pairing does not start until each orbital holds one electron, that is, each is singly occupied.

Electronic Configuration

The assignment of all the electrons of an atom to shells and sub-shells is its electronic configuration. In 4p3, 4 is the principal quantum number, p the sub-shell and 3 the number of electrons in it.
H: 1s1; He: 1s2; Li: 1s2 2s1; Be: 1s2 2s2; B: 1s2 2s2 2p1; C: 1s2 2s2 2p2; N: 1s2 2s2 2p3; O: 1s2 2s2 2p4; F: 1s2 2s2 2p5; Ne: 1s2 2s2 2p6.
In shorthand, filled noble-gas cores are written in brackets, since core electrons take no part in bonding: Na: [Ne] 3s1; Mg: [Ne] 3s2; Al: [Ne] 3s2 3p1; Si: [Ne] 3s2 3p2; P: [Ne] 3s2 3p3; S: [Ne] 3s2 3p4; Cl: [Ne] 3s2 3p5; Ar: [Ne] 3s2 3p6.

Atomic Structure Concepts and Summary for Class 9 Chemistry

Quick Revision Notes: Atomic Structure (CBSE)

Access structured revision notes for Atomic Structure designed in alignment with the latest CBSE curriculum for Class 9 Chemistry. These summaries help clarify core themes and support effective daily study.

Expert Study Material for Class 9 Chemistry

Each chapter summary is structured around standard CBSE textbooks, allowing students to check their understanding and clarify complex ideas early in their revision.

Complete Your Chapter Revision

Follow up your revision by attempting the interactive online Chemistry MCQ test and practice worksheets for this chapter to verify your mastery. All platform resources are free to access.

FAQs

Where can I download the latest PDF for CBSE Class 9 Science Advanced Chemistry Atomic Structure Notes Set 02?

You can download the teacher prepared revision notes for CBSE Class 9 Science Advanced Chemistry Atomic Structure Notes Set 02 from StudiesToday.com. These notes are designed as per 2026-27 academic session to help Class 9 students get the best study material for Chemistry.

Are these Chemistry notes for Class 9 based on the 2026 board exam pattern?

Yes, our CBSE Class 9 Science Advanced Chemistry Atomic Structure Notes Set 02 include 50% competency-based questions with focus on core logic, keyword definitions, and the practical application of Chemistry principles which is important for getting more marks in 2026 CBSE exams.

Do these Class 9 notes cover all topic-wise concepts for Chemistry?

Yes, our CBSE Class 9 Science Advanced Chemistry Atomic Structure Notes Set 02 provide a detailed, topic wise breakdown of the chapter. Fundamental definitions, complex numerical formulas and all topics of CBSE syllabus in Class 9 is covered.

How can I use CBSE Class 9 Science Advanced Chemistry Atomic Structure Notes Set 02 for quick last-minute revision?

These notes for Chemistry are organized into bullet points and easy-to-read charts. By using CBSE Class 9 Science Advanced Chemistry Atomic Structure Notes Set 02, Class 9 students fast revise formulas, key definitions before the exams.

Is there any registration required to download Class 9 Chemistry notes?

No, all study resources on StudiesToday, including CBSE Class 9 Science Advanced Chemistry Atomic Structure Notes Set 02, are available for immediate free download. Class 9 Chemistry study material is available in PDF and can be downloaded on mobile.