Official CBSE Assignments for Class 6 Science
Explore structured practice materials through the CBSE Class 6 Science Collection of Assignments. Tailored for Class 6 learners, utilizing these Science assignments ensures thorough preparation and strengthens foundational knowledge before final CBSE evaluations.
Solved Practice Assignments for Science
View or download the dedicated CBSE Class 6 Science Collection of Assignments resource below. Engaging with these assignments under focused study conditions ensures continuous academic progress and mastery of the 2026-27 curriculum.
Module – 16
Assignment - I, II, III (Motion and Measurement of Distances)
Question Q.1. Name the following:
(i) Any ancient means of transport …………………………………
(ii) S.I unit for measuring length …………………………….
(iii) Motion in a straight line …………………………….
(iv) S.I. unit of time is …………………………….
(v) Full form of S.I. unit is ………………………..
(vi) Motion that repeats itself at regular intervals of time is called……………
Answer: (i) Boat / Animal transport (Horse/Bullock)
(ii) Metre
(iii) Rectilinear motion
(iv) Second
(v) International System of Units
(vi) Periodic motion
In simple words: These are standard scientific names for common measurements and types of motion.
Exam Tip: Memorize exact S.I. units as questions from this list frequently appear in objective sections.
Question Q.2. State True or False-
(i) One metre is equal to 1000 centimetre.
(ii) Motion of a wheel is circular motion.
(iii) Metre scale is used to measure length and breadth.
(iv) 'Foot' is a unit of length.
(v) A curved line can be measured with the help of a scale only.
(vi) Both oscillatory and vibratory motions are examples of periodic motions.
(vii) A metre rod can be used to determine mass of a body.
(viii) For correct measurement of length, we should see the metre scale from one side.
Answer: (i) False (1 m = 100 cm)
(ii) False (Motion of a wheel is rotational and translatory / rolling motion, while a point on it is circular)
(iii) True
(iv) True
(v) False (A thread and a scale are used for curved lines)
(vi) True
(vii) False (A metre rod measures length, not mass)
(viii) False (Eye must be exactly in front of the point of reading to avoid parallax error)
In simple words: Read each statement carefully to check units and measurement rules.
Exam Tip: Watch out for words like "only" or incorrect unit conversions in True/False statements.
Question Q.3. Fill in the blanks
(i) The wheel of a moving bicycle describes ___________ and __________ motion.
(ii) Kelvin is the unit of ___________.
(iii) The early people used to domesticate ____________ to help them move form one place to another.
(iv) The invention of the ___________ proved to be a revolution in our means of transportation.
(v) Lengths more than 1m are measured by ___________.
(vi) Every measurement consists of a ___________ and a __________.
(vii) Movement of pencil on paper while writing is an example of _______ motion.
(viii) 1m = ……………………cm
(ix) 1km = ……………………mm
(x) 5m = ……………………dm
(xi) 1000m = ……………………km
(xii) 15cm = ……………………mm
Answer: (i) Rotational, Rectilinear
(ii) Temperature
(iii) Animals (like horses, donkeys, or camels)
(iv) Wheel
(v) Metre rod or measuring tape
(vi) Number, unit
(vii) Rectilinear
(viii) 100
(ix) 1000000
(x) 50
(xi) 1
(xii) 150
In simple words: Fill in with appropriate scientific terms and conversion factors.
Exam Tip: Remember metric conversions: 1 m = 100 cm, 1 km = 1000 m, 1 cm = 10 mm.
Question Q.4. Match the following-
(i) Temperature (a) Kilogram
(ii) Mass (b) Degree celsius
(iii) Length (c) Square metre
(iv) Time (d) Metre
(v) Area (e) Degree
(f) Second
Answer: (i) - (b), (ii) - (a), (iii) - (d), (iv) - (f), (v) - (c)
In simple words: Match each physical quantity with its proper unit of measurement.
Exam Tip: Always pair quantities with their standard SI or commonly used units.
Question Q.5.(i) One day is equal to-
(a) 1600 minutes
(b) 85000 seconds
(c) 86400 seconds
(d) None of these
Answer: (c) 86400 seconds
\(1 \text{ day} = 24 \text{ hours} \times 60 \text{ minutes} \times 60 \text{ seconds} = 24 \times 3600 = 86400 \text{ seconds}\)
In simple words: Multiply hours, minutes, and seconds to find total seconds in a day.
Exam Tip: Keep the conversion factor 1 hour = 3600 seconds handy for time calculations.
Question Q.5.(ii) A drill used by a carpenter executes
(a) Only translatory motion
(b) Only a rotatory motion
(c) Both translatory motion and rotatory motion
(d) Only circular motion
Answer: (c) Both translatory motion and rotatory motion
As the drill rotates around its axis (rotatory motion), it also moves forward into the wood (translatory motion).
In simple words: A carpenter's drill spins and moves forward at the same time.
Exam Tip: Identify tools that combine spinning and linear progress as having combined or multiple motions.
Question Q.5.(iii) The motion executed by a swing is-
(a) An oscillatory motion
(b) A translatory motion as well as rotatory motion
(c) A rotatory motion
(d) A Translatory motion as well as oscillatory motion
Answer: (a) An oscillatory motion
A swing moves to and fro repeatedly along the same path, which defines oscillatory motion.
In simple words: Back and forth movement like a swing is called oscillation.
Exam Tip: Swings, pendulums, and plucked guitar strings are classic examples of oscillatory motion.
Question Q.5.(iv) The handle and needle of a sewing machine
(a) Both execute a rotatory motion
(b) Both execute a translatory and an oscillatory motion
(c) Execute different types of motions
(d) Both execute a circular motion.
Answer: (c) Execute different types of motions
The wheel/handle rotates in circles (rotatory motion), while the needle moves up and down in a straight line (periodic/translatory-oscillatory motion).
In simple words: Different parts of a machine can move in completely different ways.
Exam Tip: Analyze complex machines part-by-part when answering questions about motion types.
Question Q.5. Solve the crossword given below- Across: 2. The state of a body when it does not change its position with time and with respect to the surroundings
Answer: Rest
In simple words: When an object is not moving, it is at rest.
Exam Tip: Rest and motion are relative terms depending on the surroundings.
Question Q.5. Solve the crossword given below- Across: 4. Motion of a body along a curved path with all its parts exhibiting similar motion and having similar and equal displacements.
Answer: Curvilinear
In simple words: Motion along a curved track.
Question Q.5. Solve the crossword given below- Across: 8. Motion of a thin body about a fixed point so that each part of the body remains at equal distance from that fixed point.
Answer: Rotational
In simple words: Spinning around a fixed center or axis.
Question Q.5. Solve the crossword given below- Across: 11. Motion of earth round the sun.
Answer: Revolution
In simple words: Moving in a closed orbit around another body.
Question Q.5. Solve the crossword given below- Across: 12. The type of 'to and fro' motion of a body about its position of rest
Answer: Oscillatory
In simple words: Repetitive back and forth motion.
Question Q.5. Solve the crossword given below- Across: 13. Motion of a body in a straight line with all its parts having similar and equal displacements.
Answer: Rectilinear
In simple words: Moving straight ahead.
Question Q.5. Solve the crossword given below- Down: 1. The standard unit of length
Answer: Metre
In simple words: The standard SI unit for measuring length.
Question Q.5. Solve the crossword given below- Down: 3. A motion which repeats itself after regular intervals of time
Answer: Periodic
In simple words: Motion that repeats in fixed time intervals.
Question Q.5. Solve the crossword given below- Down: 5. The comparison of an unknown quantity with some fixed quantity of the same kind.
Answer: Measurement
In simple words: Finding the size or amount using a standard unit.
Question Q.5. Solve the crossword given below- Down: 6. A fast 'to and fro' motion of some parts of a body about its position of rest
Answer: Vibratory
In simple words: Rapid back and forth oscillations.
Question Q.5. Solve the crossword given below- Down: 7. A simple device used to measure length and distances
Answer: Ruler
In simple words: A scale or measuring tape.
Question Q.5. Solve the crossword given below- Down: 9. Motion of a body where all its parts have similar and equal displacement
Answer: Translatory
In simple words: Movement where all parts travel equally.
Question IV. The distance between Radha's home & her school is 3250 m. Express this distance in km.
Answer: Distance in metres = 3250 m
Since \(1 \text{ km} = 1000 \text{ m}\), we divide by 1000:
Distance in km = \(\frac{3250}{1000} = 3.25 \text{ km}\)
In simple words: Divide metres by 1000 to convert into kilometres.
Exam Tip: Always state the conversion formula clearly before performing division.
Question V. While measuring the length of a knitting needle, the reading of the scale at one end is 3.0 cm & at the other end is 33.1 cm. What is the length of the needle?
Answer: Reading at one end (\(x_1\)) = 3.0 cm
Reading at the other end (\(x_2\)) = 33.1 cm
Length of the needle = \(x_2 - x_1 = 33.1 \text{ cm} - 3.0 \text{ cm} = 30.1 \text{ cm}\)
In simple words: Subtract the starting reading from the ending reading to get the actual length.
Question VI. Why could you not use an elastic measuring tape to measure distance? What would be some of the problems you would meet in telling someone about a distance you measures with an elastic tape?
Answer: An elastic measuring tape stretches when pulled. Because its length changes with tension, it will not give a consistent or accurate measurement. Problems faced would include: different people stretching it by different amounts leading to varying readings, inability to reproduce the same measurement, and lack of a reliable standard unit.
In simple words: Elastic tapes stretch, so measurements will change every time you pull them.
Question VII. Describe the types of motion.
Answer: The primary types of motion are:
1. Translatory Motion: All parts of an object move through the same distance in the same time (e.g., rectilinear and curvilinear).
2. Rotational Motion: An object spins around a fixed axis without changing its position (e.g., spinning top).
3. Circular Motion: An object moves along a circular path (e.g., moon around the earth).
4. Periodic Motion: Motion that repeats itself at regular intervals of time (e.g., pendulum).
5. Oscillatory / Vibratory Motion: To and fro motion about a mean position (e.g., swing).
In simple words: Different objects move in different ways like straight lines, circles, spinning, or back and forth.
Question VIII. Give one point of difference between circular & rotatory motion.
Answer: In circular motion, an entire object changes its position and moves along a circular path around a center. In rotatory motion, the object spins around a fixed axis located within or passing through the body itself without changing its overall location.
In simple words: In circular motion the body moves around another point; in rotatory motion it spins on its own axis.
Question IX. Explain combined motion with the help of an example.
Answer: When a body exhibits two or more types of motion simultaneously, it is called combined motion. Example: The earth revolves around the sun (circular/periodic motion) while simultaneously rotating on its own axis (rotational motion). Another example is a moving bicycle wheel which rotates on its axle while moving forward linearly (translatory motion).
In simple words: Doing two types of movement at the same time is combined motion.
Question X. Write similarities & differences between the motion of a bicycle & a ceiling fan that has been switched on.
Answer: Similarities: Both the wheels of a moving bicycle and the blades of a ceiling fan exhibit rotational motion.
Differences: A ceiling fan stays fixed in one place and only rotates. A bicycle undergoes translatory motion (moving forward on the road) along with the rotational motion of its wheels.
In simple words: Both spin in circles, but the bicycle also travels forward while the fan stays in one place.
Question Q.1. Classify the following as Magnetic and Non-Magnetic materials: a) A Compass b) Iron rod c) Cobalt d) Plastic e) Register
Answer: Magnetic materials: Iron rod, Cobalt, A Compass (contains a magnetic needle)
Non-Magnetic materials: Plastic, Register
In simple words: Materials attracted to magnets are magnetic; others are non-magnetic.
Question Q.2. What is a Magnes Stick?
Answer: A Magnes stick is a wooden stick with a piece of lodestone (natural magnet) attached at one end, traditionally used by shepherds in ancient times (like Magnes) to control their cattle containing iron elements or shoes with iron nails.
In simple words: An ancient shepherd's stick fitted with a natural magnet at the bottom.
Question Q.3. Study the following diagram: a) Why did the iron fillings stick to the magnet? b) As shown in the diagram, most iron fillings stick towards the ends of the magnet. Why? c) What will you observe if another magnet is brought near the ends of the magnet?
Answer: a) Iron is a magnetic material and gets attracted to a magnet.
b) The magnetic force of a bar magnet is strongest at its poles (ends).
c) We will observe attraction if unlike poles are brought close, and repulsion if like poles are brought close.
In simple words: Magnets attract iron, have strongest pull at their ends, and push or pull other magnets depending on their poles.
Question Q.4. State true or false for the following- (i) The 'N' poles of two magnets attract each other. (ii) Repulsion is the only sure test of magnetism. (iii) Magnetism is strongest at the centre of a bar magnet. (iv) Wood is attracted to magnet. (v) Substances which get attracted to a magnet are called conductors.
Answer: (i) False (Like poles repel)
(ii) True
(iii) False (Strongest at the poles/ends)
(iv) False
(v) False (They are called magnetic substances, not conductors)
In simple words: Check magnetic properties carefully before marking true or false.
Question Q.5. Match the following- (i) Lodestone (ii) Electromagnets (iii) Single touch method (iv) Sailors and navigators (v) Hammering (vi) Keepers
Answer: (i) - (b) natural magnets
(ii) - (f) electric bell
(iii) - (d) to magnetise a bar
(iv) - (c) compass needle
(v) - (e) demagnetize magnet
(vi) - (a) protect magnets not in use
In simple words: Match magnetic terms with their correct definitions or applications.
Question Q.6. Choose the correct answer- (i) The attractive power of a rectangular bar magnet is maximum. (a) Only at its left end ...
Answer: (d) At both ends (poles)
The magnetic strength of a bar magnet is concentrated at its two poles (north and south ends).
In simple words: Both ends of a bar magnet pull strongest.
Question Q.10. Name the process shown in following diagram.
Answer: Magnetisation of an iron bar using the single-touch method.
In simple words: Rubbing a magnet along an iron bar to make it magnetic.
Question Q.11. Solve the crossword given below- Across: 2. A bar of iron that can attract small pieces of iron
Answer: Magnet
In simple words: An object that attracts iron.
Question Q.11. Solve the crossword given below- Across: 4. The name given to the magnetic ore after the place of its origin
Answer: Magnetite
In simple words: Natural magnetic iron ore.
Question Q.11. Solve the crossword given below- Across: 6. The two ends of a magnet having strongest power
Answer: Poles
In simple words: North and South ends.
Question Q.11. Solve the crossword given below- Across: 7. The type of force found between two unlike poles of a magnet
Answer: Attraction
In simple words: Opposite poles pull each other.
Question Q.11. Solve the crossword given below- Across: 8. The device which uses a magnetic needle for determining directions
Answer: Compass
In simple words: Direction-finding tool.
Question Q.11. Solve the crossword given below- Across: 9. One of the shapes of man-made magnets
Answer: Horseshoe
In simple words: U-shaped magnet.
Question Q.11. Solve the crossword given below- Down: 1. The name given to the magnetic ore when its direction leading properties were studied
Answer: Lodestone
In simple words: Leading stone.
Question Q.11. Solve the crossword given below- Down: 3. The type of substances which do not get attracted towards a magnet
Answer: Nonmagnetic
In simple words: Substances unaffected by magnets.
Question Q.11. Solve the crossword given below- Down: 5. The only sure test of magnetism
Answer: Repulsion
In simple words: Only repulsion proves two objects are both magnets.
Question Q.12. What is a magnet stick.
Answer: A stick with a natural magnet at its end used in olden times. (See Q.2 above)
In simple words: A shepherd's stick with a lodestone attached.
Question Q.13. In what direction does a freely suspended magnet always rest?
Answer: North-South direction.
In simple words: A free magnet always points North and South.
Question Q.14. A tailor slipped the needle from his hand on the floor. How will you help the tailor find the needle?
Answer: By moving a strong bar magnet over the floor near where the needle fell; the iron needle will stick to the magnet.
In simple words: Sweep a magnet across the floor to pick up the iron needle.
Question Q.15. What will you observe if two bar magnets are placed one above the other with their north poles on the same side?
Answer: They will repel each other because like poles repel.
In simple words: They will push apart due to matching poles.
Question QUESTION BANK-2 I. Differentiate between: a. Natural & Artificial Magnets b. Magnetic & Non-Magnetic Materials
Answer: a. Natural Magnets: Found in nature (e.g., lodestone), irregular shape, weak strength. Artificial Magnets: Made by humans (e.g., bar magnet, horseshoe magnet), various strong shapes.
b. Magnetic Materials: Get attracted to magnets (e.g., iron, nickel, cobalt). Non-Magnetic Materials: Do not get attracted to magnets (e.g., wood, plastic, paper).
In simple words: Natural occur naturally and artificial are man-made; magnetic materials stick to magnets while non-magnetic ones do not.
Question QUESTION BANK-2 II. Write any two properties of a magnet.
Answer: 1. Every magnet has two poles (North and South).
2. Like poles repel each other, while unlike poles attract each other.
In simple words: Magnets have two poles and opposites attract while likes repel.
Question QUESTION BANK-2 III. A bar magnet has no markings to indicate its poles. How would you find out near which end is its north pole located?
Answer: Suspend the bar magnet freely using a thread. When it comes to rest, the end pointing towards the geographic North is the North pole of the magnet.
In simple words: Hang it with a string; the end pointing north is the North pole.
Question QUESTION BANK-2 IV. How is a compass used to find directions?
Answer: A compass has a magnetized needle that pivots freely and always aligns in the North-South direction. Once North is known, other directions (South, East, West) can easily be identified.
In simple words: The compass needle points North, helping us find all other directions.
Question QUESTION BANK-2 V. You are given an iron strip. How will you make it into a magnet?
Answer: By the single-touch method: Take a bar magnet and place one of its poles near one edge of the iron strip, then stroke it along the length of the strip in one direction only without lifting. Repeat this 30-40 times to magnetize the iron strip.
In simple words: Stroke an iron strip repeatedly in one direction with a bar magnet.
Question QUESTION BANK-2 VI. Name the conditions that make magnets lose their properties.
Answer: Heating, dropping from a height, hammering, and improper storage (keeping like poles together or without keepers).
In simple words: Rough handling, heating, or dropping can demagnetize a magnet.
Question QUESTION BANK-2 VII. How will you keep magnets safely?
Answer: Store bar magnets in pairs with their unlike poles on the same side, separated by a piece of wood, and with soft iron keepers placed across their ends.
In simple words: Use wooden blocks and iron keepers to store bar magnets safely.
Question Q.1. Tick the correct option: a) Water is essential because it is used ... b) The main sources of water are..... c) Drought may result due to...... d) Impacts of drought include......
Answer: a) 3) to sustain life
b) 2) Rainfall or snowfall
c) 1) Deforestation
d) 4) all of the above
In simple words: Water sustains life, comes mainly from rain/snow, is reduced by deforestation, and causes widespread hardship.
Question Q.2 Match the following columns: (i) Drought (ii) Deforestation (iii) Water table (iv) Flood
Answer: (i) - (c), (ii) - (d), (iii) - (b), (iv) - (a)
In simple words: Match environmental terms with their correct definitions.
Question Q.3 Answer in one word- (i) Loss of water by plant leaves. (ii) Guiding rain water to reach underground. (iii) Formation of clouds. (iv) Water conservation strategy based on “catch water where it falls.”
Answer: (i) Transpiration
(ii) Rainwater harvesting
(iii) Condensation
(iv) Rainwater harvesting
In simple words: Single-word scientific names for water cycle and conservation processes.
Question Q.4 What are the reasons of lowering of ground water in cities?
Answer: 1. Paving of open grounds with concrete and asphalt, preventing rainwater seepage.
2. Excessive pumping of groundwater through tube wells to meet high population demands.
3. Deforestation and reduced green cover.
In simple words: Concrete roads stop rain from soaking into the ground, while heavy pumping empties underground water.
Question QUESTION BANK-3 I. Describe how water is cycle in nature.
Answer: Water evaporates from oceans, lakes, and rivers due to heat from the sun. Transpiration also releases water vapour from plants. This vapour rises, cools, and condenses to form clouds. When heavy, it falls back to earth as rain or snow, flowing back to oceans, completing the water cycle.
In simple words: Water evaporates, forms clouds, rains down, and flows back to the sea in a continuous cycle.
Question QUESTION BANK-3 II. Take out a cooled bottle of water from refrigerator & keep it on a table. For some time you notice a puddle of water around it. Why?
Answer: The cold surface of the bottle cools the water vapour present in the surrounding air. This vapour condenses into tiny water droplets on the outer surface of the bottle, which accumulate and form a puddle.
In simple words: Moisture in the air touches the cold bottle and condenses into liquid water drops.
Question QUESTION BANK-3 III. How are clouds formed?
Answer: As air moves up, it gets cooler. At higher altitudes, water vapour cools down so much that it condenses into tiny water droplets. Millions of these tiny droplets gather together in the air to form clouds.
In simple words: Water vapour rises, cools down, and turns into tiny floating water droplets forming clouds.
Question QUESTION BANK-3 IV. When does a drought occur?
Answer: A drought occurs when a region receives no rainfall or very scanty rainfall for a prolonged period (a year or more), leading to severe water scarcity, dry soil, and crop failure.
In simple words: Drought happens when there is little to no rain for a very long time.
Question QUESTION BANK-3 V. Explain 'roof-top rain water harvesting' with diagram.
Answer: In roof-top rainwater harvesting, rainwater collected on rooftops is directed through pipes into an underground storage tank or a percolation pit. This stored water recharges groundwater or is used for household purposes after filtration.
In simple words: Collecting rainwater from roofs and sending it underground to recharge water tables.
Question Q.1. Write 'L' for Luminous and 'NL' for Non-luminous: (i) Sun (ii) Radium (iii) Shoe (iv) Painting (v) Lighted Torch (vi) Electric light
Answer: (i) L, (ii) NL, (iii) NL, (iv) NL, (v) L, (vi) L
In simple words: Objects that emit their own light are luminous; others are non-luminous.
Question Q.2. State True or False: (i) The image formed in pin hole camera is of same size as the object. ...
Answer: (i) False (It is usually diminished)
(ii) False (Shadows only show outline, not details)
(iii) True
(iv) True
(v) True
(vi) True
(vii) False (Moon reflects sunlight, it is non-luminous)
In simple words: Check properties of shadows, mirrors, and pinhole cameras.
Question Q.3. Fill in the blanks- (i) In a plane mirror __________ image is formed. (ii) When light hits opaque objects ___________ are formed. ...
Answer: (i) virtual and erect
(ii) shadows
(iii) inverted, diminished
(iv) straight lines (rectilinear propagation)
(v) plane mirror
(vi) size
In simple words: Fill in with correct optical terms.
Question Q.4. Match the following- (i) Moon (ii) Sun (iii) Brick (iv) Mirror (v) Tracing paper (vi) Clear glass
Answer: (i) - (b), (ii) - (d), (iii) - (a), (iv) - (c) [Note: mirrors reflect, clear glass is transparent], (v) - (e), (vi) - (c)
In simple words: Match objects with their correct optical classification.
Question Q.5. Give one word for the following- (i) Dark patch behind an opaque object (ii) Instrument used to see around corners ...
Answer: (i) Shadow
(ii) Periscope
(iii) Lateral inversion
(iv) Non-luminous object
(v) Translucent object
In simple words: Scientific terms for optical phenomena and devices.
Question Q.6. Tick the right answer- (i) To get a shadow, we need (a) Only a source of light & a screen (b) Only an opaque object (c) Both (i) and (ii) (d) Neither (i) nor (ii)
Answer: (c) Both (i) and (ii) (Note: also needs an opaque object)
In simple words: A shadow needs a light source, an opaque object, and a screen.
Question Q.6.(ii) The image formed by a plane mirror (a) Is an erect image (b) Is of same size as that of object (c) Shows an interchange of right and left (d) Shows all above characteristics
Answer: (d) Shows all above characteristics
Plane mirror images are virtual, erect, same size, and laterally inverted.
In simple words: Plane mirrors give upright, same-sized, laterally inverted images.
Question Q.6.(iii) A pin hole camera produces- (a) An erect and enlarged image (b) Inverted and diminished image (c) Inverted and enlarged image (d) Erect and diminished image
Answer: (b) Inverted and diminished image
In simple words: Pinhole cameras form upside-down and smaller pictures.
Question Q.7. Solve the crossword given below- Across: 2. The property of light related to its propagation in straight lines
Answer: Rectilinear
In simple words: Light travels in straight lines.
Question Q.7. Solve the crossword given below- Across: 4. The process of 'bouncing back' of light from a given surface
Answer: Reflection
In simple words: Bouncing of light rays.
Question Q.7. Solve the crossword given below- Across: 7. Something that is seen in a plane mirror
Answer: Image
In simple words: Reflection seen in mirror.
Question Q.7. Solve the crossword given below- Across: 8. Type of objects that let light to pass through them only partially
Answer: Translucent
In simple words: Semi-clear materials.
Question Q.7. Solve the crossword given below- Across: 9. A form of energy which travels at a speed of 3 x 10^8 m/s and produces a sensation of sight
Answer: Light
In simple words: Form of energy enabling vision.
Question Q.7. Solve the crossword given below- Down: 1. Type of objects that let light to pass through them freely
Answer: Transparent
In simple words: Clear materials.
Question Q.7. Solve the crossword given below- Down: 3. Type of objects that do not let light to pass through them at all
Answer: Opaque
In simple words: Non-see-through materials.
Question Q.7. Solve the crossword given below- Down: 5. An insect which is a natural source of light
Answer: Firefly
In simple words: Glowworm.
Question Q.7. Solve the crossword given below- Down: 6. A very simple camera that forms an inverted image of an object on a screen
Answer: Pinhole
In simple words: Pinhole camera.
Question Q.8. Study the following diagram and answer the following questions- (i) Which property of light is indicated here? (ii) The flame of candle will be visible in which case and why?
Answer: (i) Rectilinear propagation of light (light travels in a straight line).
(ii) Visible in case (A) because the pipe is straight, allowing light to reach the eye. In case (B), the pipe is bent, blocking the straight path of light.
In simple words: Light travels straight, so you can only see through a straight tube.
Question Q.9. Study the following diagram and answer the following questions- (i) Which phenomenon is shown in this figure? (ii) What is the use of the mirror in the given diagram?
Answer: (i) Reflection of light.
(ii) The mirror reflects the incident ray of light, changing its direction.
In simple words: Mirrors bounce light off their surface in reflection.
Question Q.12. Give 2 examples of natural & artificial sources of light.
Answer: Natural sources: Sun, Stars.
Artificial sources: Electric bulb, Burning candle.
In simple words: Natural light comes from nature; artificial light is man-made.
Question Q.13. What is the difference between the shadows of a red rose & a yellow rose?
Answer: There is no difference in the shape or colour of their shadows because shadows are only dark patches and do not depend on the colour of the object.
In simple words: Shadows are always black/dark, regardless of the object's color.
Question Q.14. Give examples of formation of shadows in nature.
Answer: Solar eclipse, lunar eclipse, and shadows of trees formed on the ground during sunlight.
In simple words: Eclipses and tree shadows outdoors.
Question Q.15. Give some examples of screens that you observe in daily life.
Answer: White wall, cinema screen, ground, and a sheet of paper.
In simple words: Walls, paper, and cinema screens where images or shadows fall.
Question Q.4. Study the chart given below:- Which could be the processes 1 and 2 in the manufacture of cotton fabric? (a) 1- spinning, 2- weaving ...
Answer: (a) 1- spinning, 2- weaving
Fibres are spun into yarn (Process 1), and yarns are woven/knitted into fabric (Process 2).
In simple words: Fibres become yarn by spinning, and yarn becomes fabric by weaving.
Question Q.5. Identify the fabric in the following: (i) shawl (ii) saree (iii) muffler (iv) socks (v) mosquito net (v) curtains
Answer: (i) Wool / Pashmina
(ii) Silk / Cotton / Chiffon
(iii) Wool
(iv) Wool / Nylon / Cotton
(v) Nylon / Net fabric
(vi) Cotton / Synthetic blend
In simple words: Common clothing and household items made from various textile fibers.
Question Q.6. Name the following:- (i) Two types of natural fibres. (ii) Examples of unstitched fabrics used even today. (iii) States where cotton is grown. (iv) Conditions required for growing cotton. (v) States where jute is grown. (vi) Devices used for spinning. (vii) Devices used for weaving. (viii) Materials used by early people to cover their bodies. (ix) Fibre cultivated in Egypt near river Nile. (x) Items made from coir. (xi) Person who popularized the use of charkha.
Answer: (i) Plant fibres and Animal fibres
(ii) Saree, dhoti, turban, lungi
(iii) Maharashtra, Gujarat, Punjab
(iv) Black soil and warm climate
(v) West Bengal, Bihar, Assam
(vi) Takli, charkha, spinning machine
(vii) Looms (handlooms/powerlooms)
(viii) Large leaves, animal skins, bark
(ix) Flax
(x) Ropes, mats, brushes, mattresses
(xi) Mahatma Gandhi
In simple words: Factual recall questions about textile origins and processing tools.
Question QUESTION BANK Q.1. Outline the various steps involved in obtaining cotton from cotton plant.
Answer: 1. Harvesting: Cotton bolls are picked by hand from cotton plants.
2. Ginning: Seeds are separated from cotton fibres by combing or machines.
3. Spinning: Fibres are twisted together to form yarn.
4. Weaving/Knitting: Yarn is made into fabric.
In simple words: Pick cotton bolls, remove seeds (ginning), spin into yarn, and weave into cloth.
Question QUESTION BANK Q.2. How are jute fibres obtained after its harvesting?
Answer: Harvested stems of jute plants are immersed in water for a few days (retting) until they rot. Then the fibres are separated by hand from the rotten stalks.
In simple words: Soak jute stalks in water until they rot, then peel out the fibers.
Question QUESTION BANK Q.3. At what stage is jute harvested?
Answer: Jute is harvested at the flowering stage.
In simple words: Cut when flowers appear on the plant.
Question QUESTION BANK Q.4. Why does cotton yarn burns with the smell of burning paper?
Answer: Because both cotton and paper are plant products made primarily of cellulose.
In simple words: Cotton and paper are both made of plant cellulose, so they smell the same when burned.
Question QUESTION BANK Q.5. From which part of a plant, cotton and jute are obtained?
Answer: Cotton is obtained from fruits (cotton bolls), and jute is obtained from the stem.
In simple words: Cotton comes from fruit bolls; jute comes from stems.
Question QUESTION BANK Q.6. Differentiate between knitting and weaving. Which one of them is a better method and why?
Answer: Weaving uses two sets of yarns arranged together in a criss-cross fashion on looms. Knitting uses a single yarn to make a piece of fabric by forming interlocking loops. Neither is universally "better"; weaving is ideal for strong, structured fabrics (like shirts), while knitting is best for stretchy, warm garments (like sweaters).
In simple words: Weaving crosses two sets of threads; knitting loops a single thread.
Question QUESTION BANK Q.7. Give reasons for the following- (i) Gunny bags are made up of jute. (ii) Jute stems are immersed in water after harvesting. (iii) We prefer to wear cotton clothes in summer season.
Answer: (i) Jute is strong, durable, and cheap.
(ii) To rot the soft tissues and easily separate the tough jute fibres.
(iii) Cotton is breathable and absorbs sweat well, keeping the body cool.
In simple words: Jute is tough, soaking rots stalks for fiber extraction, and cotton absorbs sweat.
Question Q.1. Fill in the blanks; (i) Materials that are difficult to compress are called ___________. (ii) Vinegar is ____________ in water. ...
Answer: (i) hard
(ii) miscible (soluble)
(iii) dissolve
(iv) sinks, plastic block
(v) opaque
(vi) Diamond
(vii) air
(viii) smooth, rough
(ix) immiscible
(x) Diamond
In simple words: Standard properties of matter such as hardness, solubility, and transparency.
Question Q.2. State True or False for the following:- (i) Light can pass through the palm of a human being. (ii) Wood is an opaque object. ...
Answer: (i) False
(ii) True
(iii) True
(iv) False (Ice floats on water)
(v) False (Lemon juice is miscible in water, not oil)
(vi) True
(vii) False (Plastics are non-lustrous, metals are lustrous)
In simple words: Check material properties like opacity, buoyancy, and luster.
Question Q.3. Solve the crossword given below:- Across: 1 The intermixing of molecules of one substance with another ...
Answer: Across: 1. Diffusion, 4. Material, 6. Soluble, 8. Metals, 9. Matter, 10. Gas, 11. Solution.
Down: 2. Insoluble, 3. Volume, 5. Density, 7. Luster, 8. Mass.
In simple words: Scientific terms for states of matter, solutions, and properties.
Question Q.4. Write 'S' for soluble and 'IS' for insoluble: (a) Coconut oil (b) Lemon (c) Lemon juice (d) Sand (e) Wood (f) Finger ring (g) Rasna (h) Milk
Answer: (a) IS (immiscible), (b) S, (c) S, (d) IS, (e) IS, (f) IS, (g) S, (h) S
In simple words: Determine whether substances dissolve or mix well in water.
Question Q.4.(iv) Glass is an example of (a) Transparent object (b) Opaque object (c) Translucent object (d) Both (a) and (c)
Answer: (a) Transparent object (Standard window/clear glass)
In simple words: Clear glass allows light to pass through completely.
Question Q.5.(v) Which one is not matter (a) Water (b) Pen (c) Petrol (d) Feelings
Answer: (d) Feelings
Matter has mass and occupies space; feelings do not.
In simple words: Emotions are not matter because they lack physical mass and volume.
Question Q.6.(vi) A material that disappears in water (a) Sand (b) Salt (c) Saw dust (d) Stone
Answer: (b) Salt
Salt dissolves completely in water.
In simple words: Soluble substances dissolve and seem to disappear in water.
Question QUESTION BANK Q.1. Differentiate between. (a) Hard and soft substances (b) Soluble and insoluble substances (c) Lustrous and Non-lustrous materials (d) Iron and Aluminium
Answer: (a) Hard: Difficult to compress or scratch (e.g., iron, wood). Soft: Easy to compress or scratch (e.g., cotton, sponge).
(b) Soluble: Dissolves in water (e.g., salt, sugar). Insoluble: Does not dissolve in water (e.g., sand, chalk powder).
(c) Lustrous: Have a shiny surface (e.g., gold, silver). Non-lustrous: Dull appearance without shine (e.g., wood, rubber).
(d) Iron: Magnetic, prone to rusting easily. Aluminium: Non-magnetic, forms a protective oxide layer resisting rust.
In simple words: Grouping materials by physical properties like hardness, solubility, shine, and magnetism.
Question QUESTION BANK Q.2. Answer the following questions. (i) Why are materials grouped together? (ii) How are metals different from other substances? ...
Answer: (i) For convenience and to study their properties easily.
(ii) Metals are hard, lustrous, good conductors of heat and electricity, and malleable.
(iii) Mustard oil forms a separate layer floating on water as it is immiscible and lighter.
(iv) Based on their properties and the purpose of the object (e.g., glass for tumblers, wood for chairs).
(v) Rub the surface with sandpaper to remove the dull outer layer and expose fresh shiny metal.
(vi) Similarity: Both are metals, lustrous, and good conductors. Difference: Iron is magnetic and rusts; aluminium is non-magnetic and corrosion-resistant.
(vii) High luster and good electrical/thermal conductivity.
In simple words: Grouping helps organization, and metals have special shiny and conductive properties.
Question QUESTION BANK Q.3. Give reasons. (i) Metals loose their shine and give dull appearance after sometime. (ii) It is not wise to use a cloth like material to make a tumbler. ...
Answer: (i) Due to the action of moisture and air (oxidation/corrosion).
(ii) Cloth is porous and cannot hold liquids.
(iii) Paper burns easily and cannot withstand high cooking temperatures.
(iv) To provide privacy by letting light through without allowing clear visibility.
(v) Salt dissolves/sinks and forms a solution, while chalk/sawdust are insoluble and lighter/less dense, floating or remaining suspended.
(vi) Sugar particles dissolve uniformly in water spaces.
(vii) Water is essential for metabolic reactions and transporting nutrients in our body.
In simple words: Materials are chosen for specific functions based on waterproofness, strength, and solubility.
Question Q.1. Match the columns: (i) Burning (ii) Photosynthesis (iii) Wind mill (iv) Inhale (v) Exhale
Answer: (i) - 2 (oxygen) [or carbon dioxide in specific contexts, but burning requires oxygen], (ii) - 1 (carbon dioxide), (iii) - 5 (wind), (iv) - 2 (oxygen), (v) - 1 (carbon dioxide)
In simple words: Match life processes and natural phenomena with relevant gases or wind.
Question Q.2. Fill in the blanks- (i) Food is prepared by plants ___________ by the process of ___________. (ii) Increased humidity means increased presence of __________ in the air. ...
Answer: (i) carbohydrates (glucose), photosynthesis
(ii) water vapour
(iii) 0.03 percent
(iv) Helium, Neon (or Argon, Krypton)
(v) aquatic
(vi) decreases
(vii) space
In simple words: Standard facts about air composition and plant nutrition.
Question Q.3. State true or false for the following- (i) As we go higher, the atmosphere gets thicker. (ii) Like any other matter, air cannot be compressed easily. ...
Answer: (i) False (Gets thinner)
(ii) False (Air can be compressed easily)
(iii) False (Nitrogen is the largest component at 78%)
(iv) True
(v) False (Air is a mixture, not a compound)
In simple words: Check atmospheric pressure, gas composition, and mixture properties.
Question Q.4. Answer in one word- (i) Gas with maximum concentration in air. (ii) Gas released by plants during respiration. ...
Answer: (i) Nitrogen
(ii) Carbon dioxide
(iii) Oxygen cylinder
(iv) Respiration
In simple words: Quick identification of gases and biological processes.
Question QUESTION BANK Q.1. What is the composition of air?
Answer: Air is a mixture of approximately 78% Nitrogen, 21% Oxygen, 0.9% Argon, 0.04% Water vapour, 0.03% Carbon dioxide, and trace amounts of other noble gases.
In simple words: Mostly nitrogen and oxygen with small amounts of other gases and water vapor.
Question QUESTION BANK Q.2. How will you prove that air supports burning?
Answer: Place a burning candle on a table and cover it with an inverted glass jar. After a short while, the candle extinguishes because the oxygen trapped inside gets consumed during combustion.
In simple words: Covering a burning candle cuts off its oxygen supply, making it go out.
Question QUESTION BANK Q.3. How will you show that air is dissolved in water?
Answer: Take some water in a glass pan or beaker and heat it gently on a tripod stand. Before the water starts boiling, tiny bubbles appear on the inner sides of the glass container. These bubbles are the air dissolved in water.
In simple words: Heating water forms tiny air bubbles on the sides before boiling begins.
Question QUESTION BANK Q.4. Why does a lump of cotton wool shrink in water?
Answer: Cotton wool contains a large amount of air trapped between its fibers. When immersed in water, the water replaces the trapped air, causing the cotton lump to shrink.
In simple words: Water forces out the trapped air inside cotton wool, making it collapse.
Question QUESTION BANK Q.5. Give reasons- (i) Snakes and earthworms come out of the soil during rainy season. (ii) We should not breathe air through mouth? ...
Answer: (i) Rainwater fills the air spaces in the soil, forcing them to come out to breathe.
(ii) Breathing through the mouth lets dust and germs enter without filtration.
(iii) To filter out smoke, dust, and harmful pollutants.
(iv) Photosynthesis by plants continually replenishes oxygen in the atmosphere.
(v) Dust and soot particles stick to the oily/dusty film on the glass.
(vi) The blanket cuts off the supply of oxygen, putting out the fire.
(vii) Quilts can trap exhaled carbon dioxide and reduce fresh oxygen intake.
In simple words: Explanations regarding respiration, filtration, and fire safety.
Question Q.1. Name the following: (i) Process used to separate grains from stalk. (ii) Process of separating tea leaves from tea. ...
Answer: (i) Threshing
(ii) Filtration
(iii) Winnowing
(iv) Handpicking
(v) Winnowing
(vi) Separating funnel
(vii) Churning
(viii) Evaporation
(ix) Filter paper, cotton (or strainer)
In simple words: Standard separation techniques for mixtures.
Question Q.2. Match the process with the mixture: (i) Churning (ii) Evaporation (iii) Filtration (iv) Handpicking (v) Sieving
Answer: (i) - 4, (ii) - 3, (iii) - 2 (or liquid/solid separation), (iv) - 1, (v) - 5
In simple words: Match separation methods with appropriate mixtures.
Question Q.3. Fill in the blanks: (i) Few drops of lemon juice added to milk gives ________. (ii) A mixture of sawdust and water can be separated by ________. ...
Answer: (i) curd / paneer (coagulation)
(ii) filtration (or decantation)
(iii) filter
(iv) sedimentation
(v) salt crystals (residue)
(vi) sea water
(vii) Sieving
In simple words: Fill in with correct physical/chemical separation terms.
Question Q.5.(i) The property used in separating a mixture of two solids by winnowing is- (a) Difference in weight (b) Difference in colour (c) Difference in size (d) All of the above
Answer: (a) Difference in weight
Lighter components (chaff) are blown away by wind, while heavier grains fall down.
In simple words: Winnowing relies on weight differences in the wind.
Question Q.5.(ii) Changing a liquid into its vapour state on its surface is called- (a) Boiling (b) Sublimation (c) Evaporation (d) All of these
Answer: (c) Evaporation
In simple words: Surface conversion of liquid to gas is evaporation.
Question Q.5.(iii) Method used to separate a mixture of two immiscible liquids- (a) Separating funnel (b) Decantation (c) Sedimentation (d) Evaporation
Answer: (a) Separating funnel
In simple words: Immiscible liquids form layers and are separated using a funnel.
Question Q.5.(iv) Process used to separate pebbles (a) Sedimentation (b) Sieving (c) Winnowing (d) Any of the above
Answer: (b) Sieving (or handpicking depending on size)
In simple words: Sieving separates large impurities from smaller grains.
Question Q.5.(v) The process of separating a liquid from a solid sediment is called (a) Threshing (b) Decantation (c) Winnowing (d) Filtration
Answer: (b) Decantation
In simple words: Pouring out liquid gently without disturbing settled solid sediment.
Question Q.5.(vi) Which of the following mixtures cannot be separated by evaporation (a) Sea water (b) Sugar solution (c) Sand in water (d) Sugar and salt
Answer: (c) Sand in water (Sand is separated by filtration/sedimentation, not evaporation)
In simple words: Insoluble sand is removed by filtering, not evaporating.
Question QUESTION BANK Q.1. Why do we need to separate different components of a mixture? Give two examples.
Answer: To remove harmful/unwanted substances or to obtain useful components. Examples: 1. Removing stones from rice. 2. Separating tea leaves from tea.
In simple words: Separation removes dirt or extracts useful ingredients.
Question QUESTION BANK Q.2. What is winnowing? Where is it used?
Answer: Winnowing is the method of separating heavier and lighter components of a mixture by wind or blowing air. It is used by farmers to separate lighter husk from heavier grain seeds.
In simple words: Using wind to blow away light chaff from heavy grains.
Question QUESTION BANK Q.3. What is sieving? Where is it used?
Answer: Sieving allows fine particles to pass through the holes of a sieve while the larger impurities remain on the sieve. It is used in flour mills to separate broken flour/bran and at construction sites to separate pebbles from sand.
In simple words: Using a mesh screen to separate big particles from small ones.
Question QUESTION BANK Q.4. How would you obtain clear water from a sample of muddy water?
Answer: 1. Allow muddy water to stand (sedimentation) so mud settles at the bottom.
2. Gently pour the clear water into another container (decantation).
3. Filter the decanted water using filter paper for complete clarity.
In simple words: Let mud settle, pour off clear water, and filter it.
Question QUESTION BANK Q.5. Answer the following questions. (i) Why are fruits and vegetable juices filtered before drinking? (ii) What is the principle used in the method of sedimentation and decantation? ...
Answer: (i) To remove solid pulps and seeds.
(ii) Difference in density/weight; heavier insoluble solids settle down.
(iii) By adding more solute and heating the solution.
(iv) Sieving separates components of different sizes using a mesh (e.g., flour milling, sand filtering).
(v) Both are solid substances.
In simple words: Applications and principles of filtration, sedimentation, and solutions.
Question Q.1. Fill in the blanks: (i) Boiling the water into its vapour is a _________ change. (ii) Growing old is a _________ change. ...
Answer: (i) physical (reversible)
(ii) irreversible (permanent)
(iii) non-periodic (natural)
(iv) physical (irreversible)
(v) reversible (reversing state is not possible directly, but growth is irreversible)
(vi) physical
(vii) chemical (irreversible)
(viii) periodic
(ix) chemical
(x) chemical (irreversible)
(xi) periodic
In simple words: Classifying changes as physical, chemical, reversible, or periodic.
Question Q.2. State true or false for the following statements- (i) Cooking of rice is a physical change. (ii) Rubbing chalk on a black board is a chemical change. ...
Answer: (i) False (Chemical change)
(ii) False (Physical change)
(iii) False (Irreversible change)
(iv) False (Floods occur unpredictably)
In simple words: Check whether changes create new substances or can be reversed.
Question Q.3. Choose the correct answer- (i) Which of the following involves a fast chemical change? (a) The burning of a matchstick ...
Answer: (i) (a) The burning of a matchstick
(ii) (a) Increase in temperature
(iii) (a) Periodic change
(iv) (d) Burning of cracker
(v) (d) Physical change (Growth involves complex chemical and biological changes)
In simple words: Quick identification of change types and solubility factors.
Question Q.4. Can the following changes be reversed? Write Yes or No. (i) Salt dissolving in water (ii) Blooming of bud into flower ...
Answer: (i) Yes (by evaporation)
(ii) No
(iii) Yes
(iv) No
In simple words: Determine if original materials can be recovered.
Question QUESTION BANK Q.1. State two changes that are desirable as well as undesirable. Give reasons.
Answer: 1. Rain: Desirable for crops and drinking water; undesirable when it causes floods.
2. Friction: Desirable for walking and writing; undesirable because it causes wear and tear in machinery.
In simple words: Some changes are helpful in moderation but harmful in excess.
Question QUESTION BANK Q.2. Explain how burning of paper is different from tearing it.
Answer: Tearing paper is a physical change where only size and shape change without forming new substances, and it can be reversed using tape. Burning paper is a chemical change that produces ash, smoke, and new substances, and it is irreversible.
In simple words: Tearing just changes paper size, while burning creates ash and new substances permanently.
Question Q.1. Match the following. (Mention the number of column A in box given) [Aristotle, Alexander Flemming, Edward Jenner, Louis Pasteur, J.C. Bose, William Harvey, Dr. Salim Ali, Charles Darwin]
Answer: Aristotle - Father of biology
Alexander Flemming - Discovered antibiotic called penicillin
Edward Jenner - Discovered the vaccine for small pox
Louis Pasteur - Discovered Pasteurization
J.C. Bose - Discovered sensitivity in plants
William Harvey - Circulation of blood
Dr. Salim Ali - Study about birds
Charles Darwin - Theory of organic evolution
In simple words: Match eminent scientists with their major biological discoveries.
Question Q.2. Complete the chart: Science -> 3 Branches -> Biology, [Zoology], [Botany]
Answer: Science has 3 main branches: Physics, Chemistry, and Biology. Under Biology: Study of animals (Zoology) and Study of plants (Botany).
In simple words: Main branches of science include biology, which splits into zoology and botany.
Question ASSIGNMENT-2 Q.1. Fill in the blanks: a) Lion eats only flesh and so, is called _____. b) Carbohydrates remain stored in plants as _____.
Answer: a) carnivore
b) starch
c) proteins
d) Seeds, vegetables (or greens)
e) nectar
f) carnivores
g) omnivores
In simple words: Basic biological terms for feeding habits and nutrient storage.
Question ASSIGNMENT-2 Q.2. Which is the edible part of the following plant? a) Rice b) Sugarcane c) Strawberry d) Pea
Answer: a) Seed
b) Stem
c) False fruit (receptacle)
d) Seed
In simple words: Identify which part of the plant we eat.
Question ASSIGNMENT-2 Q.3. Complete the table: Edible part of the plant [Root, Stem, Leaves, Flowers, Fruits, Seeds]
Answer: Root: Carrot, radish, beetroot
Stem: Potato, ginger, sugarcane
Leaves: Cabbage, spinach, lettuce
Flowers: Cauliflower, broccoli, banana flower
Fruits: Apple, brinjal, mango
Seeds: Wheat, maize, pulses
In simple words: Examples of plant parts used as food.
Question ASSIGNMENT-2 Q.4. Choose the correct answer. (a) Which of the following is not obtained from plants? ...
Answer: (a) i Butter (obtained from milk/animals)
(b) ii Cereals (obtained from plants)
(c) ii Herbivores
(d) i. Salt
In simple words: Identify plant versus animal food sources and animal classifications.
Question Assignment- 1 (Components of Food) Q1. Give one word: a) Protective foods are _____ and _____. b) Meals that provide us all the nutrients in the proper quantities _____...
Answer: a) Vitamins, minerals
b) Balanced diet
c) Roughage (dietary fibre)
d) nutrients
e) Starch
f) Energy
g) Body-building
h) Fats
In simple words: Basic nutrition terminology.
Question Assignment- 1 Q.2. Do as directed: a) Food has following functions in our body - 1) ... b) Name five food items which have fibre.
Answer: a) 1) Provides energy for work and body processes.
2) Helps in growth and body building.
3) Protects the body from diseases and regulates body functions.
b) Whole grains, fresh fruits, raw vegetables, beans, pulses.
In simple words: Food provides energy, growth, and disease protection.
Question Assignment- 1 Q.3. Give difference between: Energy giving food & Body building food
Answer: Energy giving food: Contains carbohydrates and fats (e.g., rice, potato, butter, oil).
Body building food: Contains proteins (e.g., pulses, milk, eggs, meat, fish).
In simple words: Carbs/fats give energy, while proteins build and repair body tissues.
Question Assignment- 1 Q.5. Observe the following activity done with egg white. Label the diagram. The food sample contains (a) Fat (b) Protein (c) Vitamin (d) None of the above
Answer: (b) Protein
Egg white is rich in protein, which turns purple upon adding copper sulphate and caustic soda (Biuret test).
In simple words: Egg white contains protein, proven by the purple color change test.
Question Q.1. Classify the following into herbs, shrubs and trees, Teak, Bougainvillea, Carrot, Tulsi, Eucalyptus, Ginger, Mango, Wheat, Mustard, Rose, Palm, and Sunflower.
Answer: Herbs: Carrot, Ginger, Wheat, Mustard, Sunflower
Shrubs: Bougainvillea, Tulsi, Rose
Trees: Teak, Eucalyptus, Mango, Palm
In simple words: Grouping plants by stem size into soft herbs, bushy shrubs, and tall trees.
Question Q.2. Fill in the blanks : a) __________ system is found above soil in a plant. b) Absorption of water in plants take place by _______________ ...
Answer: a) Shoot
b) roots
c) spines
d) tendrils (climbers)
e) tap root / main root
f) leaves (pitcher)
g) chlorophyll
h) stomata
In simple words: Plant anatomy terminology and functions.
Question Q.3. Unscramble the 3 functions of leaves from the given jumbled letters. - RRATSPTNIAOIN - EYTHNPSOIOSHTS - NOITARIPSER
Answer: 1. TRANSPIRATION
2. PHOTOSYNTHESIS
3. RESPIRATION
In simple words: Unscrambled plant leaf functions.
Question Q.4. Tick the correct option: a) Which plant has a tap root system? 1. Paddy 2. Mustard 3. Maize 4. Wheat
Answer: 2. Mustard
Mustard is a dicot plant with a tap root system, while paddy, maize, and wheat have fibrous roots.
In simple words: Mustard has a single main taproot with smaller lateral roots.
Question Q.4.(b) Which plant has a fibrous root system? 1. Pea 2. Beans 3. Wheat 4. Neem
Answer: 3. Wheat
In simple words: Cereals like wheat have bushy fibrous roots.
Question Q.4.(c) Which part of potato plant is eaten? 1. Root 2. Leaf 3. Stem 4. None of these
Answer: 3. Stem (Potato is an underground modified stem tubers)
In simple words: Potatoes are underground stems, not roots.
Question Q.4.(d) Which of the following function is performed by the root? 1) absorbs water and mineral from the soil 2) anchors the plant 3) checks soil erosion 4) All of the above
Answer: 4) All of the above
In simple words: Roots anchor plants, absorb water, and prevent soil erosion.
Question Q.4.(e) Which of the following function is performed by the stem? ... 3) It keeps plants straight and gives support to the plant 4) All of the above.
Answer: 3) It keeps plants straight and gives support to the plant (Note: stems also bear branches/leaves and transport water/food)
In simple words: Stems support plants and transport water and food.
Question Q.1. Differentiate between the following: Biodegradable Waste & Non biodegradable Waste
Answer: Biodegradable Waste: Consists of organic matter from plants and animals; easily broken down by microorganisms into harmless substances.
Non-biodegradable Waste: Inorganic waste that cannot be broken down by microorganisms and persists in the environment for a long time (e.g., plastics, glass).
In simple words: Biodegradable waste rots and mixes with soil naturally; non-biodegradable waste stays unchanged for years.
Question Q.2. Fill in the blanks:- a) __________ wastes include materials of plant and animal origin. b) Pollution causes contamination of natural elements such as _________, _________ and ___________.
Answer: a) Biodegradable
b) air, water, land (soil)
c) non-biodegradable waste
d) toxic / poisonous
e) paper mache (or recycled paper)
f) gizzard
g) Conservation
In simple words: Waste management terminology and pollution facts.
Question Q.5. Why is recycling important? List three products (each) that cannot and can be recycled.
Answer: Importance: Reduces waste in landfills, conserves natural resources, and lowers pollution.
Can be recycled: Paper, glass bottles, metal cans, plastic containers.
Cannot be recycled: Used tissues, food-soiled paper, ceramics, certain laminated plastics.
In simple words: Recycling saves resources and reduces trash; paper and metal can be recycled, while soiled items cannot.
Question Q.2. Name the joints used when, a) A student climbs the stairs b) A bowler throws a ball to batsman c) A teacher turns her head
Answer: a) Hinge joint (knees) and ball and socket joint (hips)
b) Ball and socket joint (shoulder)
c) Pivotal joint (neck)
In simple words: Knees use hinge joints, shoulders use ball and socket joints, and necks use pivotal joints.
Question Q.3. Give reasons for the following: a) Backbone is made up of many small bones b) Body of a fish is streamlined
Answer: a) To allow flexibility and bending of our back in various directions.
b) To reduce water resistance and allow easy movement through water.
In simple words: Small vertebrae make the spine flexible, and streamlined bodies help fish swim smoothly.
Question Q.4. Match the following : (a) Spinal Cord (b) Tendon (c) Sternum (d) Earthworm (e) Snail
Answer: (a) - the nerves that run down the backbone.
(b) - a tough strand that joins a muscle to a bone.
(c) - a plate of bone at the front of the chest.
(d) - along its body are tiny hair called bristles.
(e) - have a soft body covered with a tube like shell (or muscular foot movement).
In simple words: Match anatomical and zoological terms with their descriptions.
Question Q.5. Tick the correct option 1. Which of the following is made up of vertebrae? ...
Answer: 1. c) Backbone
2. b) Shoulder Girdle
3. c) Snail
4. a) Rib Cage
In simple words: Standard anatomical MCQs on skeletal parts.
Question Q.1. Fill in the blanks a) Temperature is the ___________ component of a habitat. b) ____________ is a water plant. c) ____________ and ____________ are the main components of any habitat.
Answer: a) abiotic
b) Hydrilla (or Lotus)
c) Biotic, abiotic
In simple words: Habitat components include living (biotic) and non-living (abiotic) parts.
Question Q.3. How are the following adapted to live in their respective environment? a) Polar bear b) Frog
Answer: a) Polar bear: Thick fur and a layer of fat (blubber) under the skin to keep warm in freezing environments, white fur for camouflage in snow.
b) Frog: Webbed feet for swimming in water, strong back legs for leaping on land, and moist skin for breathing underwater.
In simple words: Polar bears have thick fur for cold snow, and frogs have webbed feet and lungs/skin for water and land.
Question Q.4. Answer the following questions: a) A motor car moves, takes in oxygen and gives out carbon dioxide, consumes fuel ... In what ways does it not qualify as a living organism?
Answer: A car cannot grow, reproduce, respond to stimuli, or undergo cellular metabolism on its own. It is a machine made by humans.
In simple words: Cars consume fuel like food, but they cannot grow, reproduce, or feel.
Question Q.6. Define the following terms: a) Stimuli. b) Phototropism.
Answer: a) Stimuli: Changes in the surroundings that make living organisms respond.
b) Phototropism: The growth movement of a plant in response to light.
In simple words: Stimuli are external triggers, and phototropism is plant growth towards light.
Question SECTION- A (PHYSICS) Q.1 Luminous bodies- (i) absorb light energy (ii) emit light energy (iii) are always a natural source (iv) are transparent
Answer: (ii) emit light energy
In simple words: Luminous objects produce and give off their own light.
Question Q.2. Which of the following materials is an electric insulator? (i) aluminium (ii) gold (iii) rubber (iv) graphite
Answer: (iii) rubber
Rubber does not allow electric current to pass through it.
In simple words: Rubber blocks electricity, making it a good insulator.
Question Q.3. What kind of medium is mineral water? (i) transparent (ii) translucent (iii) opaque (iv) neither totally transparent nor translucent
Answer: (i) transparent
In simple words: Pure mineral water allows light to pass through clearly.
Question Q.4. Which one of the following is a luminous source? (i) star (ii) moon (iii) glow signboard (iv) all of them
Answer: (i) star (Note: glow signboards emit artificial light, but stars are primary natural sources; typically stars are the primary textbook answer here)
In simple words: Stars produce their own light.
Question SECTION- B (CHEMISTRY) Q.14 Choose the correct answer from the following: (i) Different fruits kept in a basket can be separated by: (a) Handpicking (b) Sieving (c) Winnowing (d) Sedimentation and Decantation
Answer: (a) Handpicking
In simple words: Different fruits are easily picked out by hand.
Question Q.14.(ii) Process of conversion of vapour back to its liquid state is called: (a) Condensation (b) Evaporation (c) Distillation (d) Both (a) and (c)
Answer: (a) Condensation
In simple words: Gas turning back to liquid is condensation.
Question Q.14.(iii) Melting of chocolate is: (a) Reversible change (b) Irreversible change (c) Periodic change (d) Both (b) and (c)
Answer: (a) Reversible change
Melted chocolate can be solidified again by cooling.
In simple words: Melted chocolate can refreeze, so it is reversible.
Question SECTION- C (BIOLOGY) Q.1. Choose the correct option:- (a) The contribution of Edward Jenner is- (a) Discovered antibiotic- penicillin (b) Discovered vaccine against smallpox ...
Answer: (b) Discovered vaccine against smallpox
In simple words: Edward Jenner developed the smallpox vaccine.
Question Q.1.(b) Biology is the branch of science which deals with the study of (a) Only plants (b) Only animals (c) Microorganisms (d) Living organisms
Answer: (d) Living organisms
In simple words: Biology studies all life forms, both plants and animals.
Question Q.1.(c) Which of these food items help in body building- (a) Rice (b) Pulses (c) Potato (d) Bread
Answer: (b) Pulses (rich in proteins)
In simple words: Pulses provide proteins for body building.
Question Q.1.(d) Lemon plant has green & hard stem so it is an example of- (a) Tree (b) Shrub (c) Herb (d) Climber
Answer: (b) Shrub
In simple words: Lemon plants have bushy woody stems, classifying them as shrubs.
Question Q.1.(e) The part of the leaf by which it is attached with stem is- (a) Lamina (b) Vein (c) Midrib (d) Petiole
Answer: (d) Petiole
In simple words: The stalk connecting a leaf to the stem is the petiole.
Question Q.2. Name the edible part of spinach
Answer: Leaves
In simple words: We eat the leafy part of spinach plants.
Question Q.3. Name the process by which plant leaves lose water vapour in air.
Answer: Transpiration
In simple words: Water loss through leaf pores is transpiration.
Question Q.4. Give the contribution of Dr. Salim Ali.
Answer: He was a renowned ornithologist who conducted extensive bird surveys in India and wrote seminal books on Indian birds.
In simple words: Dr. Salim Ali made immense contributions to ornithology (study of birds).
Question Q.5. Which of these contain roughage? Milk, Apple, Eggs, Meat
Answer: Apple
In simple words: Plant-based fruits like apples contain dietary fiber (roughage).
Question Q.6. How the study of biology helps in the field of agriculture?
Answer: It helps in developing high-yielding seed varieties, controlling plant pests and diseases, and improving crop management techniques.
In simple words: Biology helps improve crop varieties and pest control in farming.
Question Q.7. Ms. Sharma is making Kheer. Apart from milk, she used 2 raw materials obtained from plants. Name these two raw materials and the plant parts from which they are obtained.
Answer: 1. Rice (obtained from seeds)
2. Sugar (obtained from sugarcane stems)
In simple words: Rice comes from seeds and sugar comes from plant stems.
Unit – 5: ELECTRICITY AND CIRCUITS
Contents :
1. Conduction Tester- Circuit & Theory
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Module – 17 & 18
Revision And Examinations
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List of Activities
1. To measure the length of a curved line.
2. To prove that magnetic force is maximum at the poles of a magnet and minimum at its centre.
3. To show that a freely suspended magnet always aligns in North-South direction.
4. To find direction with the help of a magnetic compass.
5. To show the process of condensation on the cold surface of a glass containing ice.
6. To show reflection of light from a plane mirror.
7. To prove that light always travel in a straight line (rectilinear propagation of the light).
8. To make a simple electric circuit.
9. To differentiate between conductors and insulators using a conduction tester.
MOTION & MEASUREMENTS OF DISTANCES
TUTORIAL
Types of Motion
Translatory Motion
It is a motion in which all the particles of a body move through the same distance in the same time. E.g. the motion of a drawer of a table, a moving car or train, a ball rolling on the ground. There are two types of translatory motion, rectilinear and curvilinear.
Rectilinear motion
When a body moves along a straight line it is said to be in rectilinear motion. E.g. a car moving on a straight road, an athlete running on a straight track.
Curvilinear motion
When a body moves along a curved path then it is said to be in curvilinear motion. E.g. a ball thrown up in the air at an angle, a car moving on a curved road.
Rotational motion
The motion of a body around a fixed axis without changing its place then it is in rotational motion. E.g. a spinning top, a potter‟s wheel, blades of a moving fan.
Circular motion
A body is set to be in circular motion when it keeps on moving along a circular path. When a body is in circular motion its position changes with time. E.g. the moon moving around the earth.
Periodic motion
If a motion repeats itself after a particular time or a definite interval of time then it is known a periodic motion. E.g. pendulum of a clock, movement of the hands of a clock.
Vibratory motion
The to and fro motion of an object, about its position of rest (mean position) is called oscillatory or vibratory motion. E.g. strings of a guitar, a swing and membrane of tabla.
Combined motion
Some times a body can have two or three kinds of motion at the same time. E.g. The earth revolves around the sun, but also rotates on its axis.
Random Motion
When a body does not show any regularity in its motion it is said to be in a random motion.
=============================================
Assignment – I, II, III
Q.1. Name the following:
(i) Any ancient means of transport …………………………………
(ii) S.I unit for measuring length …………………………….
(iii) Motion in a straight line …………………………….
(iv) S.I. unit of time is …………………………….
(v) Full form of S.I. unit is ………………………..
(vi) Motion that repeats itself at regular intervals of time is called……………
Q.2. State True or False-
(i) One metre is equal to 1000 centimetre.
(ii) Motion of a wheel is circular motion.
(iii) Metre scale is used to measure length and breadth.
(iv) „Foot‟ is a unit of length.
(v) A curved line can be measured with the help of a scale only.
(vi) Both oscillatory and vibratory motions are examples of periodic motions.
(vii) A metre rod can be used to determine mass of a body.
(viii) For correct measurement of length, we should see the metre scale from one
Click on link below to download CBSE Class 6 Science Collection of Assignments
Free study material for Science
Chapter Assignment & Practice Material for Class 6 Science All topics
Chapter Practice Questions for Class 6 Science
Explore reliable practice questions for All topics tailored for Class 6 learners. Use these structured worksheets to evaluate preparedness and strengthen core problem-solving skills.
Why Practice Class 6 Science Assignments?
- Curriculum Standards: Assignments match modern CBSE sample formats to ensure relevant preparation.
- Thorough Revision: Detailed problem sets reinforce core concepts and eliminate conceptual weak spots.
- Execution Speed: Timed practice with assignment sets sharpens overall response timing.
Effective Strategy for Class 6 Science Assignments
- Textbook Review: Always study the core NCERT book for Class 6 Science prior to beginning the assignment.
- Independent Attempt: Solve All topics questions on your own initially before cross-checking with expert solutions.
- Error Tracking: Record challenging concepts in a dedicated notebook and practice online MCQ tests for revision.
FAQs
You can download free PDF assignments for Class 6 Science All topics from StudiesToday.com. These practice sheets have been updated for the 2026-27 session covering all concepts from latest NCERT textbook.
Yes, our teachers have given solutions for all questions in the Class 6 Science All topics assignments. This will help you to understand step-by-step methodology to get full marks in school tests and exams.
Yes. These assignments are designed as per the latest CBSE syllabus for 2026. We have included huge variety of question formats such as MCQs, Case-study based questions and important diagram-based problems found in All topics.
Practicing topicw wise assignments will help Class 6 students understand every sub-topic of All topics. Daily practice will improve speed, accuracy and answering competency-based questions.
Yes, all printable assignments for Class 6 Science All topics are available for free download in mobile-friendly PDF format.