Pradeep's KL Gogia Solutions Physics Chapter 22 Work Energy Power And Collision Part 1

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Physics Chapter 22 Work Energy Power And Collision

Review structured textbook solutions for Class 11 Physics Chapter 22 Work Energy Power And Collision prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Download Chapter 22 Work Energy Power And Collision Textbook Solutions PDF

Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Work, Energy, Power and Collision - Part 1

6.3 Sample Problems based on work done by constant force

Question 1. A body of mass 5 kg is placed at the origin, and can move only on the x-axis. A force of 10 N is acting on it in a direction making an angle of 60° with the x-axis and displaces it along the x-axis by 4 metres. The work done by the force is: (a) 2.5 J (b) 7.25 J (c) 40 J (d) 20 J

Solution. (d) Work done = F·s = F s cos θ = 10 × 4 × cos 60° = 20 J.

Teacher's Note: Only the force component along the displacement does work; use W = Fs cosθ.

Exam Note: State formula, substitute, write unit J.

Question 2. A force F = (5i + 3j) N is applied over a particle which displaces it from its origin to the point r = (2i − 1j) metres. The work done on the particle is: (a) −7 J (b) +13 J (c) +7 J (d) +11 J

Solution. (c) Work done = F·r = (5i + 3j)·(2i − j) = 10 − 3 = +7 J.

Teacher's Note: Work is the dot product: multiply like components and add; the j-term here is negative.

Exam Note: Dot product, not cross product; sign matters.

Question 3. A horizontal force of 5 N is required to maintain a velocity of 2 m/s for a block of 10 kg mass sliding over a rough surface. The work done by this force in one minute is: (a) 600 J (b) 60 J (c) 6 J (d) 6000 J

Solution. (a) Work done = Force × displacement = F × s = F × v × t = 5 × 2 × 60 = 600 J.

Teacher's Note: Distance = speed × time (60 s, not 1); the mass of 10 kg is a distractor.

Exam Note: Convert minute to seconds first.

Question 4. A box of mass 1 kg is pulled on a horizontal plane of length 1 m by a force of 8 N then it is raised vertically to a height of 2 m, the net work done is: (a) 28 J (b) 8 J (c) 18 J (d) None of above

Solution. (a) Work done to displace it horizontally = F × s = 8 × 1 = 8 J. Work done to raise it vertically = F × s = mgh = 1 × 10 × 2 = 20 J. ∴ Net work done = 8 + 20 = 28 J.

Teacher's Note: Add the two separate works; vertical lift needs mgh with g = 10 m/s².

Exam Note: Use g = 10 as the book does.

Question 5. A 10 kg satellite completes one revolution around the earth at a height of 100 km in 108 minutes. The work done by the gravitational force of earth will be: (a) 108 × 100 × 10 J (b) (108 × 10)/100 J (c) (100 × 10)/108 J (d) Zero

Solution. (d) Work done by centripetal force in circular motion is always equal to zero.

Teacher's Note: Gravity is perpendicular to the velocity in circular orbit, so cos 90° = 0; all data is a distractor.

Exam Note: Force ⟂ displacement gives zero work.

6.4 Sample Problems based on work done by variable force

Question 6. A position dependent force F = (7 − 2x + 3x²) N acts on a small object of mass 2 kg to displace it from x = 0 to x = 5 m. The work done in joule is: (a) 70 J (b) 270 J (c) 35 J (d) 135 J [CBSE PMT 1994]

Solution. (d) Work done = ∫F dx from x = 0 to 5 = ∫05(7 − 2x + 3x²)dx = [7x − x² + x³]05 = 35 − 25 + 125 = 135 J.

Teacher's Note: For position-dependent force integrate F dx between limits; mass is not needed.

Exam Note: Show integral, limits and final unit.

Question 7. A particle moves under the effect of a force F = Cx from x = 0 to x = x1. The work done in the process is: (a) Cx1² (b) ½Cx1² (c) Cx1 (d) Zero [CPMT 1982]

Solution. (b) Work done = ∫0x1 F dx = ∫0x1 Cx dx = C[x²/2]0x1 = ½Cx1².

Teacher's Note: Linear force like a spring: work equals area of triangle, half base times height.

Exam Note: Do not forget the factor 1/2.

Question 8. The vessels A and B of equal volume and weight are immersed in water to a depth h. The vessel A has an opening at the bottom through which water can enter. If the work done in immersing A and B are WA and WB respectively, then: (a) WA = WB (b) WA < WB (c) WA > WB (d) WA >= < WB

Solution. (b) When the vessels are immersed in water, work has to be done against up-thrust force but due to opening at the bottom in vessel A, up-thrust force goes on decreasing. So work done will be less in this case.

Teacher's Note: Water entering A reduces the net upthrust, so less external work is required.

Exam Note: Link work to upthrust opposed.

Question 9. Work done in time t on a body of mass m which is accelerated from rest to a speed v in time t1 as a function of time t is given by: (a) ½ m (v/t1) t² (b) m (v/t1) t² (c) ½ (mv/t1)² t² (d) ½ m (v²/t1²) t²

Solution. (d) Work done = F·s = ma·(½at²) = ½ma²t² = ½ m (v/t1)² t² = ½ m (v²/t1²) t², since acceleration a = v/t1 is given.

Teacher's Note: Constant acceleration from rest: s = ½at² and a = v/t₁; substitute into W = F s.

Exam Note: Express a through v and t₁.

6.6 Sample problems based on force displacement graph

Question 10. A 10 kg mass moves along x-axis. Its acceleration as a function of its position is shown in the figure (a rises linearly from 0 at x = 0 to 20 cm/s² at x = 8 cm). What is the total work done on the mass by the force as the mass moves from x = 0 to x = 8 cm? [AMU (Med.) 2000] (a) 8 × 10−2 J (b) 16 × 10−2 J (c) 4 × 10−4 J (d) 1.6 × 10−3 J

2008x (cm)a (cm/s²)

Solution. (a) Work done on the mass = mass × area between the graph and displacement axis on the a-x graph = 10 × ½ (8 × 10−2) × 20 × 10−2 = 8 × 10−2 J.

Teacher's Note: Since F = ma, work equals m times area under the a-x graph; convert cm to m.

Exam Note: Convert cm to SI before multiplying.

Question 11. The relationship between force and position is shown in the figure given (in one dimensional case). The work done by the force in displacing a body from x = 1 cm to x = 5 cm is: (a) 20 ergs (b) 60 ergs (c) 70 ergs (d) 700 ergs. (Figure, described in words: a step graph of force against x in cm; the force is +10 from x = 1 to 2, +20 from 2 to 3, −20 from 3 to 4, +10 from 4 to 5, and +20 after 5.)

Solution. (a) Work done = covered area on force-displacement graph = 1 × 10 + 1 × 20 − 1 × 20 + 1 × 10 = 20 erg.

Teacher's Note: Area below the x-axis counts negative; add signed rectangle areas between the two limits only.

Exam Note: Subtract the negative-force region.

Question 12. The graph between the resistive force F acting on a body and the distance covered by the body is shown in the figure (F rises linearly from 0 at x = 0 to 20 at x = 2 m, then falls linearly to 0 at x = 4 m). The mass of the body is 25 kg and initial velocity is 2 m/s. When the distance covered by the body is 5 m, its kinetic energy would be: (a) 50 J (b) 40 J (c) 20 J (d) 10 J

20024x (m)F

Solution. (d) Initial kinetic energy of the body = ½mu² = ½ × 25 × (2)² = 50 J. Final kinetic energy = initial energy − work done against resistive force (area between graph and displacement axis) = 50 − ½ × 4 × 20 = 50 − 40 = 10 J.

Teacher's Note: Work-energy theorem: final KE = initial KE minus area under the resistive-force graph.

Exam Note: Triangle area is half base times height.

Sample problems based on work done in conservative and non-conservative field

Question 13. If W1, W2 and W3 represent the work done in moving a particle from A to B along three different paths 1, 2 and 3 respectively (as shown in the figure: a straight path, a curved path and a path with a right-angle turn, all joining the same points A and B) in the gravitational field of a point mass m, find the correct relation: (a) W1 > W2 > W3 (b) W1 = W2 = W3 (c) W1 < W2 < W3 (d) W2 > W1 > W3

Solution. (b) As gravitational field is conservative in nature, work done in moving a particle from A to B does not depend upon the path followed by the body. It always remains same.

Teacher's Note: Conservative force: work depends only on end points, never on the path taken.

Exam Note: Name the field as conservative.

Question 14. A particle of mass 0.01 kg travels along a curve with velocity given by 4i + 16k m s−1. After some time, its velocity becomes 8i + 20j m s−1 due to the action of a conservative force. The work done on particle during this interval of time is: (a) 0.32 J (b) 6.9 J (c) 9.6 J (d) 0.96 J

Solution. (d) v1 = √(4² + 16²) = √272 and v2 = √(8² + 20²) = √464. Work done = increase in kinetic energy = ½m[v2² − v1²] = ½ × 0.01 × [464 − 272] = 0.96 J.

Teacher's Note: Work-energy theorem: use speeds squared from components; direction of velocity does not matter.

Exam Note: Square magnitudes, subtract, then multiply by m/2.

6.9 Sample problems based on energy

Question 15. A particle of mass 'm' and charge 'q' is accelerated through a potential difference of 'V' volt. Its energy is: (a) qV (b) mqV (c) (q/m)V (d) q/(mV) [UPSEAT 2001]

Solution. (a) Energy of charged particle = charge × potential difference = qV.

Teacher's Note: Work done on a charge by a potential difference V is qV; mass does not enter.

Exam Note: Energy = qV, independent of mass.

Question 16. An ice cream has a marked value of 700 kcal. How many kilowatt hour of energy will it deliver to the body as it is digested? (a) 0.81 kWh (b) 0.90 kWh (c) 1.11 kWh (d) 0.71 kWh

Solution. (a) 700 kcal = 700 × 103 × 4.2 J = (700 × 103 × 4.2)/(3.6 × 106) = 0.81 kWh [As 3.6 × 106 J = 1 kWh]. (The exact value is 0.817 kWh; option (a) is the nearest.)

Teacher's Note: Convert kcal to joule with 4.2 J/cal, then divide by 3.6 × 10⁶ J per kWh.

Exam Note: Remember 1 kWh = 3.6 × 10⁶ J.

Question 17. A metallic wire of length L metres extends by l metres when stretched by suspending a weight Mg to it. The mechanical energy stored in the wire is: (a) 2Mgl (b) Mgl (c) Mgl/2 (d) Mgl/4

Solution. (c) Elastic potential energy stored in wire U = ½Fx = Mgl/2.

Teacher's Note: Force grows from zero to Mg during stretching, so stored energy uses average force, giving the half.

Exam Note: Do not write Mgl; stored energy is half.

6.10 Sample problems based on kinetic energy

Question 18. Consider the following two statements: 1. Linear momentum of a system of particles is zero. 2. Kinetic energy of a system of particles is zero. Then: (a) 1 implies 2 and 2 implies 1 (b) 1 does not imply 2 and 2 does not imply 1 (c) 1 implies 2 but 2 does not imply 1 (d) 1 does not imply 2 but 2 implies 1 [AIEEE 2003]

Solution. (d) Momentum is a vector quantity whereas kinetic energy is a scalar quantity. If the kinetic energy of a system is zero then linear momentum definitely will be zero but if the momentum of a system is zero then kinetic energy may or may not be zero.

Teacher's Note: Momentum vectors can cancel to zero while particles still move; kinetic energy cannot cancel.

Exam Note: Vector versus scalar is the key reason.

Question 19. A running man has half the kinetic energy of that of a boy of half of his mass. The man speeds up by 1 m/s so as to have same K.E. as that of boy. The original speed of the man will be: (a) √2 m/s (b) (√2 − 1) m/s (c) 1/(√2 − 1) m/s (d) 1/√2 m/s

Solution. (c) Let m = mass of the boy, M = mass of the man, v = velocity of the boy and V = velocity of the man. Initial kinetic energy of man = ½MV² = ½[½mv²] = ½[½(M/2)v²] [as m = M/2 given]. ⇒ V² = v²/4 ⇒ V = v/2 .....(i). When the man speeds up by 1 m/s, ½M(V + 1)² = ½mv² = ½(M/2)v² ⇒ (V + 1)² = v²/2 ⇒ V + 1 = v/√2 .....(ii). From (i) and (ii) we get speed of the man V = 1/(√2 − 1) m/s.

Teacher's Note: Set up two KE equations, eliminate boy speed v using v = 2V, then solve for V.

Exam Note: Define symbols first; mass ratio is man = 2 × boy.

Question 20. A body of mass 10 kg at rest is acted upon simultaneously by two forces 4 N and 3 N at right angles to each other. The kinetic energy of the body at the end of 10 sec is: (a) 100 J (b) 300 J (c) 50 J (d) 125 J [Kerala (Engg.) 2001]

Solution. (d) As the forces are working at right angle to each other therefore net force on the body F = √(4² + 3²) = 5 N. Kinetic energy of the body = work done = F × s = F × ½at² = F × ½(F/m)t² = 5 × ½ (5/10)(10)² = 125 J.

Teacher's Note: Resultant of perpendicular forces by Pythagoras; then s = ½at² from rest gives work.

Exam Note: Combine forces first, then use a = F/m.

Question 21. If the momentum of a body increases by 0.01%, its kinetic energy will increase by: (a) 0.01% (b) 0.02 % (c) 0.04 % (d) 0.08 %

Solution. (b) Kinetic energy E = P²/2m ∴ E ∝ P². Percentage increase in kinetic energy = 2(% increase in momentum) [if change is very small] = 2(0.01%) = 0.02%.

Teacher's Note: For small changes, E ∝ P² doubles the percentage change.

Exam Note: Small-change shortcut: percentage doubles for squares.

Question 22. If the momentum of a body is increased by 100 %, then the percentage increase in the kinetic energy is: (a) 150 % (b) 200 % (c) 225 % (d) 300 % [NCERT 1990; BHU 1999; Pb. PMT 1999; CPMT 1999, 2000; CBSE PMT 2001]

Solution. (d) E = P²/2m ⇒ E2/E1 = (P2/P1)² = (2P/P)² = 4. E2 = 4E1 = E1 + 3E1 = E1 + 300 % of E1.

Teacher's Note: Large change: use exact ratio; the shortcut 2× percentage fails here.

Exam Note: Increase is 300%, not final value 400%.

Question 23. A body of mass 5 kg is moving with a momentum of 10 kg-m/s. A force of 0.2 N acts on it in the direction of motion of the body for 10 seconds. The increase in its kinetic energy is: (a) 2.8 J (b) 3.2 J (c) 3.8 J (d) 4.4 J

Solution. (d) Change in momentum = P2 − P1 = F × t ⇒ P2 = P1 + F × t = 10 + 0.2 × 10 = 12 kg-m/s. Increase in kinetic energy = (1/2m)[P2² − P1²] = (1/(2 × 5))[(12)² − (10)²] = (1/10)(144 − 100) = 44/10 = 4.4 J.

Teacher's Note: Impulse gives final momentum; then use KE = P²/2m for both states.

Exam Note: Use impulse first, then energy difference.

Question 24. Two masses of 1 g and 9 g are moving with equal kinetic energies. The ratio of the magnitudes of their respective linear momenta is: (a) 1 : 9 (b) 9 : 1 (c) 1 : 3 (d) 3 : 1

Solution. (c) P = √(2mE) ∴ P ∝ √m if E = constant. So P1/P2 = √(m1/m2) = √(1/9) = 1/3.

Teacher's Note: At equal KE, momentum scales as square root of mass; lighter body has smaller momentum.

Exam Note: Ratio is root of mass ratio.

Question 25. A body of mass 2 kg is thrown upward with an energy 490 J. The height at which its kinetic energy would become half of its initial kinetic energy will be [g = 9.8 m/s²]: (a) 35 m (b) 25 m (c) 12.5 m (d) 10 m

Solution. (c) If the kinetic energy would become half, then potential energy = ½(initial kinetic energy) ⇒ mgh = ½[490] ⇒ 2 × 9.8 × h = ½[490] ⇒ h = 12.5 m.

Teacher's Note: Energy conservation: half of the initial KE has converted to potential energy at that height.

Exam Note: Use g = 9.8 as given.

Question 26. A 300 g mass has a velocity of (3i + 4j) m/sec at a certain instant. What is its kinetic energy? (a) 1.35 J (b) 2.4 J (c) 3.75 J (d) 7.35 J

Solution. (c) v = 3i + 4j ∴ v = √(3² + 4²) = 5 m/s. So kinetic energy = ½mv² = ½ × 0.3 × (5)² = 3.75 J.

Teacher's Note: Find speed magnitude from components, and convert 300 g to 0.3 kg.

Exam Note: Mass in kg before substituting.

6.11 Sample problems based on stopping of vehicle

Question 27. Two carts on horizontal straight rails are pushed apart by an explosion of a powder charge Q placed between the carts (figure: a 200 kg cart and a 300 kg cart with the charge between them). Suppose the coefficients of friction between the carts and rails are identical. If the 200 kg cart travels a distance of 36 metres and stops, the distance covered by the cart weighing 300 kg is: (a) 32 metres (b) 24 metres (c) 16 metres (d) 12 metres [CPMT 1989]

Solution. (c) Kinetic energy of cart goes against friction. ∴ E = P²/2m = μmg × s ⇒ s = P²/(2μgm²). As the two carts pushed apart by an explosion therefore they possess same linear momentum and coefficient of friction is same for both carts (given). Therefore the distance covered by the cart before coming to rest is given by s ∝ 1/m² ∴ s2/s1 = (m1/m2)² = (200/300)² = 4/9 ⇒ s2 = (4/9) × 36 = 16 metres.

Teacher's Note: Explosion from rest gives equal and opposite momenta; friction stopping distance then goes as 1/m².

Exam Note: Equal momentum, not equal speed, after explosion.

Question 28. An unloaded bus and a loaded bus are both moving with the same kinetic energy. The mass of the latter is twice that of the former. Brakes are applied to both, so as to exert equal retarding force. If x1 and x2 be the distance covered by the two buses respectively before coming to a stop, then: (a) x1 = x2 (b) 2x1 = x2 (c) 4x1 = x2 (d) 8x1 = x2

Solution. (a) If the vehicle stops by retarding force then the ratio of stopping distance x1/x2 = E1/E2. But in the given problem kinetic energy of the two buses are given same i.e. E1 = E2. ∴ x1 = x2.

Teacher's Note: Retarding force times distance equals KE, so same KE and same force give same distance.

Exam Note: Mass ratio is a distractor.

Question 29. A bus can be stopped by applying a retarding force F when it is moving with a speed v on a level road. The distance covered by it before coming to rest is s. If the load of the bus increases by 50 % because of passengers, for the same speed and same retarding force, the distance covered by the bus to come to rest shall be: (a) 1.5 s (b) 2 s (c) 1 s (d) 2.5 s

Solution. (a) Retarding force (F) × distance covered (x) = Kinetic energy (½mv²). If v and F are constants then x ∝ m ∴ x2/x1 = m2/m1 = 1.5m/m = 1.5 ⇒ x2 = 1.5 s.

Teacher's Note: At fixed speed and force, stopping distance is directly proportional to mass.

Exam Note: 50% more mass gives 1.5 times distance.

Question 30. A vehicle is moving on a rough horizontal road with velocity v. The stopping distance will be directly proportional to: (a) √v (b) v (c) v² (d) v³

Solution. (c) As s = v²/2a ∴ s ∝ v².

Teacher's Note: Stopping distance from v² = 2as, so it grows as square of initial speed.

Exam Note: Doubling speed quadruples stopping distance.

6.12 Sample problems based on potential energy

Question 31. A particle which is constrained to move along the x-axis, is subjected to a force in the same direction which varies with the distance x of the particle from the origin as F(x) = −kx + ax³. Here k and a are positive constants. For x ≥ 0, the functional form of the potential energy U(x) of the particle is: [IIT-JEE (Screening) 2002] (Options are four U-x graphs: (a) a curve dipping below zero and then rising; (b) a symmetric hump starting and ending at zero; (c) a curve falling, then rising and falling again; (d) a curve starting at zero, rising to a maximum and then falling through zero to negative values.)

Solution. (d) F = −dU/dx ⇒ dU = −F·dx ⇒ U = −∫0x(−kx + ax³)dx ⇒ U = kx²/2 − ax⁴/4. ∴ We get U = 0 at x = 0 and x = √(2k/a). Also we get U = negative for x > √(2k/a). From the given function we can see that F = 0 at x = 0 i.e. slope of U-x graph is zero at x = 0.

Teacher's Note: Integrate F to get U; check zeros, sign for large x, and zero slope at origin.

Exam Note: Show U = −∫F dx with limits.

Question 32. The potential energy of a body is given by A − Bx² (where x is the displacement). The magnitude of force acting on the particle is: (a) Constant (b) Proportional to x (c) Proportional to x² (d) Inversely proportional to x

Solution. (b) F = −dU/dx = −(d/dx)(A − Bx²) = 2Bx ∴ F ∝ x.

Teacher's Note: Force is the negative gradient of potential energy; differentiate once.

Exam Note: Constant A vanishes on differentiation.

Question 33. The potential energy of a system is represented in the first figure (U(x) rises linearly from 0 at the origin up to x = a, then stays constant). The force acting on the system will be represented by: (a), (b), (c), (d) (four F(x) graphs, each with a marked point a on the x-axis).

Solution. (c) As slope of the given graph is positive and constant up to distance a then it becomes zero. Therefore from F = −dU/dx we can say that up to distance a force will be constant (negative) and suddenly it becomes zero.

Teacher's Note: Force is the negative slope of U-x graph: constant negative, then zero beyond a.

Exam Note: Mind the minus sign in F = −dU/dx.

Question 34. A particle moves in a potential region given by U = 8x² − 4x + 400 J. Its state of equilibrium will be: (a) x = 25 m (b) x = 0.25 m (c) x = 0.025 m (d) x = 2.5 m

Solution. (b) F = −dU/dx = −(d/dx)(8x² − 4x + 400). For the equilibrium condition F = −dU/dx = 0 ⇒ 16x − 4 = 0 ⇒ x = 4/16 ∴ x = 0.25 m.

Teacher's Note: Equilibrium means zero force, i.e. dU/dx = 0; the constant 400 does not matter.

Exam Note: Set derivative to zero and solve.

6.13 Sample problems based on elastic potential energy

Question 35. A long spring is stretched by 2 cm, its potential energy is U. If the spring is stretched by 10 cm, the potential energy stored in it will be: (a) U/25 (b) U/5 (c) 5U (d) 25U

Solution. (d) Elastic potential energy of a spring U = ½kx² ∴ U ∝ x². So U2/U1 = (x2/x1)² ⇒ U2/U = (10 cm/2 cm)² ⇒ U2 = 25U.

Teacher's Note: Energy goes as square of extension; five times the stretch gives 25 times energy.

Exam Note: Ratio of extensions, squared.

Question 36. A spring of spring constant 5 × 10³ N/m is stretched initially by 5 cm from the unstretched position. Then the work required to stretch it further by another 5 cm is: (a) 6.25 N-m (b) 12.50 N-m (c) 18.75 N-m (d) 25.00 N-m

Solution. (c) Work done to stretch the spring from x1 to x2 W = ½k(x2² − x1²) = ½ × 5 × 10³ [(10 × 10−2)² − (5 × 10−2)²] = ½ × 5 × 10³ × 75 × 10−4 = 18.75 N·m.

Teacher's Note: Work between two extensions is the difference of stored energies; final extension is 10 cm total.

Exam Note: Use limits 5 cm and 10 cm, not 5 cm.

Question 37. Two springs of spring constants 1500 N/m and 3000 N/m respectively are stretched with the same force. They will have potential energy in the ratio: (a) 4 : 1 (b) 1 : 4 (c) 2 : 1 (d) 1 : 2

Solution. (c) Potential energy of spring U = F²/2k ⇒ U1/U2 = k2/k1 = 3000/1500 = 2 : 1 [if F = constant].

Teacher's Note: For equal force, energy is inversely proportional to k; the softer spring stores more.

Exam Note: Use U = F²/2k when force is equal.

Question 38. A body is attached to the lower end of a vertical spiral spring and it is gradually lowered to its equilibrium position. This stretches the spring by a length x. If the same body attached to the same spring is allowed to fall suddenly, what would be the maximum stretching in this case? (a) x (b) 2x (c) 3x (d) x/2

Solution. (b) When spring is gradually lowered to its equilibrium position kx = mg ∴ x = mg/k. When spring is allowed to fall suddenly it oscillates about its mean position. Let y be the amplitude of vibration then at lower extreme, by the conservation of energy ⇒ ½ky² = mgy ⇒ y = 2mg/k = 2x.

Teacher's Note: Sudden release: gravity loss mgy equals spring energy ½ky², giving twice the equilibrium stretch.

Exam Note: Energy conservation, not force balance.

Question 39. Two equal masses are attached to the two ends of a spring of spring constant k. The masses are pulled out symmetrically to stretch the spring by a length x over its natural length. The work done by the spring on each mass is: (a) ½kx² (b) −½kx² (c) ¼kx² (d) −¼kx²

Solution. (d) If the spring is stretched by length x, then work done by two equal masses = ½kx². So work done by each mass on the spring = ¼kx². ∴ Work done by spring on each mass = −¼kx².

Teacher's Note: Total stretching energy is split equally between the masses; the spring opposes the pull, so work is negative.

Exam Note: Sign negative: spring force opposes displacement.

6.14 Sample problems based on electrical potential energy

Question 40. A proton has a positive charge. If two protons are brought near to one another, the potential energy of the system will: (a) Increase (b) Decrease (c) Remain the same (d) Equal to the kinetic energy

Solution. (a) As the force is repulsive in nature between two protons. Therefore potential energy of the system increases.

Teacher's Note: Work must be done against repulsion to bring like charges closer, so stored energy rises.

Exam Note: Like charges: PE rises on approach.

Question 41. Two protons are situated at a distance of 100 fermi from each other. The potential energy of this system will be in eV: (a) 1.44 (b) 1.44 × 10³ (c) 1.44 × 10² (d) 1.44 × 10⁴

Solution. (d) U = (1/4πε0)·q1q2/r = 9 × 109 × (1.6 × 10−19)²/(100 × 10−15) = 2.304 × 10−15 J = (2.304 × 10−15/1.6 × 10−19) eV = 1.44 × 104 eV.

Teacher's Note: Use Coulomb potential energy with 1 fermi = 10⁻¹⁵ m, then divide by e to get eV.

Exam Note: Convert fermi to metre; joule to eV.

Question 42. 80Hg208 nucleus is bombarded by α-particles with velocity 107 m/s. If the α-particle is approaching the Hg nucleus head-on then the distance of closest approach will be: (a) 1.115 × 10−13 m (b) 11.15 × 10−13 m (c) 111.5 × 10−13 m (d) Zero

Solution. (a) When α particle moves towards the mercury nucleus its kinetic energy gets converted in potential energy of the system. At the distance of closest approach ½mv² = (1/4πε0)·q1q2/r ⇒ ½ × m × (107)² = 9 × 109 × (2e)(80e)/r ⇒ r = 1.115 × 10−13 m. Corrected: the book prints the mass as 1.6 × 10−27 kg, which would give r = 4.6 × 10−13 m; the mass of an α-particle is 6.64 × 10−27 kg, which gives r ≈ 1.11 × 10−13 m, so the printed answer (a) is right.

Teacher's Note: At closest approach all kinetic energy becomes electrostatic PE; use alpha charge 2e and Hg charge 80e.

Exam Note: Use the alpha mass, not proton mass.

Question 43. A charged particle A moves directly towards another charged particle B. For the (A + B) system, the total momentum is P and the total energy is E: (a) P and E are conserved if both A and B are free to move (b) (a) is true only if A and B have similar charges (c) If B is fixed, E is conserved but not P (d) If B is fixed, neither E nor P is conserved

Solution. (a, c) If A and B are free to move, no external forces are acting and hence P and E both are conserved but when B is fixed (with the help of an external force) then E is conserved but P is not conserved.

Teacher's Note: Momentum needs no external force; holding B fixed applies one, but energy still stays conserved.

Exam Note: Two correct options: (a) and (c).

6.15 Sample problems based on gravitational potential energy

Question 44. The work done in pulling up a block of wood weighing 2 kN for a length of 10 m on a smooth plane inclined at an angle of 15° with the horizontal is (sin 15° = 0.259): (a) 4.36 kJ (b) 5.17 kJ (c) 8.91 kJ (d) 9.82 kJ

Solution. (b) Work done = mg × h = 2 × 10³ × l sin θ = 2 × 10³ × 10 × sin 15° = 5176 J = 5.17 kJ.

Teacher's Note: On a smooth incline, work equals weight times vertical height gained, h = l sinθ.

Exam Note: Use weight 2 kN directly; no mg needed.

Question 45. Two identical cylindrical vessels with their bases at same level each contains a liquid of density d. The height of the liquid in one vessel is h1 and that in the other vessel is h2. The area of either vases is A. The work done by gravity in equalizing the levels when the two vessels are connected, is: (a) (h1 − h2)gd (b) (h1 − h2)gAd (c) ½(h1 − h2)²gAd (d) ¼(h1 − h2)²gAd [SCRA 1996]

Solution. (d) Potential energy of liquid column is given by mg(h/2) = Vdg(h/2) = Ahdg(h/2) = ½Adgh². Initial potential energy = ½Adgh1² + ½Adgh2². Final potential energy = ½Adgh² + ½Adgh² = Adgh², where h = (h1 + h2)/2. Work done by gravity = change in potential energy W = [½Adgh1² + ½Adgh2²] − Adgh² = Adg[h1²/2 + h2²/2 − (h1 + h2)²/4] = (Adg/4)(h1 − h2)².

Teacher's Note: Treat each liquid column with centre of mass at half height; final level is the average.

Exam Note: Compare initial and final potential energies.

Question 46. If g is the acceleration due to gravity on the earth's surface, the gain in the potential energy of an object of mass m raised from the surface of earth to a height equal to the radius of the earth R, is: (a) ½mgR (b) 2mgR (c) mgR (d) ¼mgR [IIT-JEE 1983]

Solution. (a) Work done = gain in potential energy = mgh/(1 + h/R) = mgR/(1 + R/R) = ½mgR [as h = R (given)].

Teacher's Note: Height equal to R is too large for mgh; use the exact mgh/(1 + h/R).

Exam Note: Do not use mgh at large heights.

Question 47. The work done in raising a mass of 15 gm from the ground to a table of 1 m height is: (a) 15 J (b) 152 J (c) 1500 J (d) 0.15 J

Solution. (d) W = mgh = 15 × 10−3 × 10 × 1 = 0.15 J.

Teacher's Note: Convert grams to kilograms before using mgh; 15 g is 0.015 kg.

Exam Note: Unit conversion earns the mark.

Question 48. A body is falling under gravity. When it loses a gravitational potential energy by U, its speed is v. The mass of the body shall be: (a) 2U/v (b) U/2v (c) 2U/v² (d) U/2v²

Solution. (c) Loss in potential energy = gain in kinetic energy ⇒ U = ½mv² ∴ m = 2U/v².

Teacher's Note: Energy conservation: potential energy lost appears as kinetic energy, then solve for m.

Exam Note: Equate U to ½mv².

Question 49. A liquid of density d is pumped by a pump P from situation (i) to situation (ii) as shown in the diagram (figure: two connected vessels; in (i) the liquid stands at height h in both, in (ii) all the liquid is in one vessel at height 2h). If the cross-section of each of the vessels is a, then the work done in pumping (neglecting friction effects) is: (a) 2dgh (b) dgha (c) 2dgh²a (d) dgh²a

Solution. (d) Potential energy of liquid column in first situation = Vdg(h/2) + Vdg(h/2) = Vdgh = ahdgh = dgh²a [as centre of mass of liquid column lies at height h/2]. Potential energy of the liquid column in second situation = Vdg(2h/2) = (a × 2h)dgh = 2dgh²a. Work done pumping = change in potential energy = 2dgh²a − dgh²a = dgh²a.

Teacher's Note: Work by pump equals rise in potential energy of the liquid, using centre-of-mass heights.

Exam Note: Final minus initial potential energy.

Question 50. The mass of a bucket containing water is 10 kg. What is the work done in pulling up the bucket from a well of depth 10 m if water is pouring out at a uniform rate from a hole in it and there is loss of 2 kg of water from it while it reaches the top (g = 10 m/sec²)? (a) 1000 J (b) 800 J (c) 900 J (d) 500 J

Solution. (c) Gravitational force on bucket at starting position = mg = 10 × 10 = 100 N. Gravitational force on bucket at final position = 8 × 10 = 80 N. So the average force throughout the vertical motion = (100 + 80)/2 = 90 N. ∴ Work done = Force × displacement = 90 × 10 = 900 J.

Teacher's Note: Weight falls uniformly from 100 N to 80 N, so use the average force times depth.

Exam Note: Uniform leak means average force works.

Question 51. A rod of mass m and length l is lying on a horizontal table. The work done in making it stand on one end will be: (a) mgl (b) mgl/2 (c) mgl/4 (d) 2mgl

Solution. (b) When the rod is lying on a horizontal table, its potential energy = 0. But when we make it stand vertical its centre of mass rises up to height l/2. So its potential energy = mgl/2. ∴ Work done = change in potential energy = mg(l/2) − 0 = mgl/2.

Teacher's Note: Only the centre of mass rises, by l/2; work equals the gain in potential energy.

Exam Note: Use centre-of-mass height, not full length.

Question 52. A metre stick, of mass 400 g, is pivoted at one end displaced through an angle 60°. The increase in its potential energy is: (a) 1 J (b) 10 J (c) 100 J (d) 1000 J

Solution. (a) Centre of mass of a stick lies at the mid point and when the stick is displaced through an angle 60° it rises up to height h from the initial position. From the figure h = l/2 − (l/2)cos θ = (l/2)(1 − cos θ). Hence the increment in potential energy of the stick = mgh = mg(l/2)(1 − cos θ) = 0.4 × 10 × ½ (1 − cos 60°) = 1 J.

Teacher's Note: Centre of mass is at l/2; its rise is (l/2)(1 − cosθ) from the pivot geometry.

Exam Note: Convert 400 g to 0.4 kg.

Question 53. Once a choice is made regarding zero potential energy reference state, the changes in potential energy: (a) Are same (b) Are different (c) Depend strictly on the choice of the zero of potential energy (d) Become indeterminate

Solution. (a) Potential energy is a relative term but the difference in potential energy is absolute term. If reference level is fixed once then change in potential energy are same always.

Teacher's Note: Potential energy values depend on the reference, but differences between two states do not.

Exam Note: Only changes in PE are physically meaningful.

6.16 Sample problem based on chain

Question 54. A uniform chain of length L and mass M is lying on a smooth table and one third of its length is hanging vertically down over the edge of the table. If g is acceleration due to gravity, the work required to pull the hanging part on to the table is: (a) MgL (b) MgL/3 (c) MgL/9 (d) MgL/18

Solution. (d) As 1/3 part of the chain is hanging from the edge of the table. So by substituting n = 3 in standard expression W = MgL/2n² = MgL/(2(3)²) = MgL/18.

Teacher's Note: Lift only the hanging third: its centre of mass rises L/6, mass M/3, giving MgL/18.

Exam Note: Substitute n = 3 in MgL/2n².

Class 11 Mathematics: Pradeep's KL Gogia Solutions for Pradeep's KL Gogia Solutions Physics Chapter 22 Work Energy Power And Collision Part 1

Access Class 11 Mathematics Solutions

Review detailed solutions for Class 11 Mathematics. The Pradeep's KL Gogia Solutions Physics Chapter 22 Work Energy Power And Collision Part 1 PDF provides comprehensive answers mapped to standard Pradeep's KL Gogia Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with Pradeep's KL Gogia Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for Class 11 Math

In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Physics?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 11 Physics. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.