Download Class 11 Physics Pradeep's KL Gogia Textbook Solutions: Chapter 19 Unit Dimensions And Measurement
Access comprehensive textbook solutions for Chapter 19 Unit Dimensions And Measurement using the Pradeep's KL Gogia reference material for Class 11 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access Pradeep's KL Gogia Textbook Answers and Solutions
View or download the dedicated Chapter 19 Unit Dimensions And Measurement solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.
Units, Dimensions and Measurement - Part 2 (Problems 27 onwards)
Sample problems on conversion of units
Question 27. Conversion of 1 MW power on a new system having basic units of mass, length and time as 10 kg, 1 dm and 1 minute respectively is
(a) 2.16 × 1012 unit (b) 1.26 × 1012 unit (c) 2.16 × 1010 unit (d) 2 × 1014 unit
Solution. (a) [P] = [ML2T-3]. Using n2 = n1[M1/M2]1[L1/L2]2[T1/T2]-3 with 1 MW = 106 W: n2 = 106[1 kg/10 kg]1[1 m/1 dm]2[1 s/1 min]-3 = 106[1 kg/10 kg][10 dm/1 dm]2[1 s/60 s]-3 = 2.16 × 1012 unit.
Teacher's Note: Larger base units give a smaller number; use n2 = n1(M1/M2)a(L1/L2)b(T1/T2)c.
Exam Note: Convert power exponents carefully: M1L2T-3.
Question 28. In two systems of relations among velocity, acceleration and force are respectively v2 = (α2/β) v1, a2 = αβ a1 and F2 = F1/(αβ). If α and β are constants then relations among mass, length and time in two systems are
(a) M2 = (α/β)M1, L2 = (α2/β2)L1, T2 = (α3T1)/β
(b) M2 = [1/(α2β2)]M1, L2 = (α3/β3)L1, T2 = (α/β2)T1
(c) M2 = (α3/β3)M1, L2 = (α2/β2)L1, T2 = (α/β)T1
(d) M2 = (α/β2)M1, L2 = (α3/β3)L1, T2 = (α2/β)T1
Solution. (b) From velocity: [L2T2-1] = [L1T1-1]α2/β ...(i). From acceleration: [L2T2-2] = [L1T1-2]αβ ...(ii). From force: [M2L2T2-2] = [M1L1T1-2] × 1/(αβ) ...(iii). Dividing (iii) by (ii): M2 = M1/((αβ)αβ) = M1/(α2β2). Squaring (i) and dividing by (ii): L2 = L1α3/β3. Dividing (i) by (ii): T2 = T1α/β2.
Teacher's Note: Solve L/T, L/T2 ratios first, then mass from force.
Exam Note: Squaring velocity relation eliminates T; standard trick.
Question 29. If the present units of length, time and mass (m, s, kg) are changed to 100 m, 100 s, and (1/10) kg then
(a) The new unit of velocity is increased 10 times (b) The new unit of force is decreased 1/1000 times (c) The new unit of energy is increased 10 times (d) The new unit of pressure is increased 1000 times
Solution. (b) Unit of velocity = m/sec; in new system = 100 m/100 sec = m/sec (same). Unit of force = kg m/sec2; in new system = (1/10) kg × 100 m/(100 sec × 100 sec) = (1/1000) kg m/sec2. Unit of energy = kg m2/sec2; in new system = (1/10) kg × (100 m × 100 m)/(100 sec × 100 sec) = (1/10) kg m2/sec2. Unit of pressure = kg/(m sec2); in new system = (1/10) kg × 1/(100 m) × 1/(100 sec × 100 sec) = 10-7 kg/(m sec2).
Teacher's Note: Substitute new units into each derived-unit formula separately; velocity unit stays unchanged here.
Exam Note: Check each option; energy unit decreases 10 times, not increases.
Question 30. Suppose we employ a system in which the unit of mass equals 100 kg, the unit of length equals 1 km and the unit of time 100 s and call the unit of energy eluoj (joule written in reverse order), then
(a) 1 eluoj = 104 joule (b) 1 eluoj = 10-3 joule (c) 1 eluoj = 10-4 joule (d) 1 joule = 103 eluoj
Solution. (a) [E] = [ML2T-2]. 1 eluoj = [100 kg] × [1 km]2 × [100 sec]-2 = 100 kg × 106 m2 × 10-4 sec-2 = 104 kg m2 sec-2 = 104 joule.
Teacher's Note: Express each new base unit in SI, then multiply with the dimensional powers.
Exam Note: Square the km conversion (106) and the time (10-4).
Question 31. If 1 gm cm s-1 = x Ns, then number x is equivalent to
(a) 1 × 10-1 (b) 3 × 10-2 (c) 6 × 10-4 (d) 1 × 10-5
Solution. (d) gm cm s-1 = 10-3 kg × 10-2 m × s-1 = 10-5 kg m s-1 = 10-5 Ns.
Teacher's Note: gm cm s-1 is the CGS unit of momentum; N s equals kg m s-1.
Exam Note: Convert g to kg (10-3) and cm to m (10-2).
Sample problems based on formulae checking
Question 32. From the dimensional consideration, which of the following equation is correct
(a) T = 2π√(R3/GM) (b) T = 2π√(GM/R3) (c) T = 2π√(GM/R2) (d) T = 2π√(R2/GM)
Solution. (a) T = 2π√(R3/GM) = 2π√(R3/gR2) = 2π√(R/g) [As GM = gR2]. Substituting dimensions: [T] = [L/LT-2]1/2 = [T]. L.H.S. = R.H.S., i.e., the above formula is correct.
Teacher's Note: GM has dimensions L3T-2, so R3/GM gives T2.
Exam Note: Reduce GM to gR2 to recognise the pendulum-like form.
Question 33. A highly rigid cubical block A of small mass M and side L is fixed rigidly onto another cubical block B of the same dimensions and of low modulus of rigidity η such that the lower face of A completely covers the upper face of B. The lower face of B is rigidly held on a horizontal surface. A small force F is applied perpendicular to one of the side faces of A. After the force is withdrawn block A executes small oscillations. The time period of which is given by
(a) 2π√(Mη/L) (b) 2π√(L/Mη) (c) 2π√(ML/η) (d) 2π√(M/ηL)
Solution. (d) Given m = mass = [M], η = coefficient of rigidity = [ML-1T-2], L = length = [L]. Substituting: [T] = 2π([M]/[ηL])1/2 = [M/(ML-1T-2 · L)]1/2 = [T]. L.H.S. = R.H.S., i.e., the above formula is correct.
Teacher's Note: Only M/(ηL) reduces to T2; test each option by dimensions.
Exam Note: Write η as ML-1T-2 before checking options.
Question 34. A small steel ball of radius r is allowed to fall under gravity through a column of a viscous liquid of coefficient of viscosity. After some time the velocity of the ball attains a constant value known as terminal velocity vT. The terminal velocity depends on (i) the mass of the ball (ii) η (iii) r and (iv) acceleration due to gravity g. Which of the following relations is dimensionally correct
(a) vT ∝ mg/(ηr) (b) vT ∝ ηr/(mg) (c) vT ∝ ηrmg (d) vT ∝ mgr/η
Solution. (a) Given vT = [LT-1], m = [M], g = [LT-2], r = [L], η = [ML-1T-1]. Checking vT ∝ mg/(ηr): [LT-1] = [M][LT-2]/([ML-1T-1][L]) = [LT-1]. L.H.S. = R.H.S., i.e., the above formula is correct.
Teacher's Note: Matches Stokes law v = mg/(6πηr) up to a constant.
Exam Note: Dimensions cannot fix numerical constants like 6π.
Question 35. A dimensionally consistent relation for the volume V of a liquid of coefficient of viscosity η flowing per second through a tube of radius r and length l and having a pressure difference p across its end, is
(a) V = πpr4/(8ηl) (b) V = πηl/(8pr4) (c) V = 8pηl/(πr4) (d) V = πpη/(8lr4)
Solution. (a) Given V = rate of flow = Volume/sec = [L3T-1], P = pressure = [ML-1T-2], r = [L], η = [ML-1T-1], l = [L]. Checking V = πPr4/(8ηl): [L3T-1] = [ML-1T-2][L4]/([ML-1T-1][L]) = [L3T-1]. L.H.S. = R.H.S., i.e., the above formula is correct.
Teacher's Note: This is Poiseuille formula; pressure over viscosity gives T-1.
Exam Note: Check options by dimensions; others give wrong powers of L.
Question 36. With the usual notations, the following equation St = u + (1/2)a(2t - 1) is
(a) Only numerically correct (b) Only dimensionally correct (c) Both numerically and dimensionally correct (d) Neither numerically nor dimensionally correct
Solution. (c) Given St = distance travelled in tth sec = [LT-1], a = [LT-2], v = [LT-1], t = [T]. Substituting in St = u + (1/2)a(2t - 1): [LT-1] = [LT-1] + [LT-2][T] ⇒ [LT-1] = [LT-1] + [LT-1]. Since the dimension of each term is equal, this equation is dimensionally correct. And after deriving this equation from kinematics we can also prove that this equation is correct numerically also.
Teacher's Note: Distance in the tth second has dimension L/T because the time interval is 1 s.
Exam Note: Numerical check: St = St - St-1 gives the same formula.
Question 37. If velocity v, acceleration A and force F are chosen as fundamental quantities, then the dimensional formula of angular momentum in terms of v, A and F would be
(a) FA-1v (b) Fv3A-2 (c) Fv2A-1 (d) F2v2A-1
Solution. (b) Given v = [LT-1], A = [LT-2], F = [MLT-2]. Checking [Angular momentum] = Fv3A-2: [ML2T-1] = [MLT-2][LT-1]3[LT-2]-2 = [ML2T-1]. L.H.S. = R.H.S., i.e., the above formula is correct.
Teacher's Note: Match powers of M, L, T on both sides to find exponents of F, v, A.
Exam Note: Only option (b) gives ML2T-1.
Question 38. The largest mass (m) that can be moved by a flowing river depends on velocity (v), density (ρ) of river water and acceleration due to gravity (g). The correct relation is
(a) m ∝ ρ2v4/g2 (b) m ∝ ρv6/g2 (c) m ∝ ρv4/g3 (d) m ∝ ρv6/g3
Solution. (d) Given m = [M], v = [LT-1], ρ = [ML-3], g = [LT-2]. Checking m = Kρv6/g3: [M] = [ML-3][LT-1]6/[LT-2]3 = [M]. L.H.S. = R.H.S., i.e., the above formula is correct.
Teacher's Note: Mass appears only in ρ, so ρ has power 1; fix v and g powers from L and T.
Exam Note: Equate L and T exponents to zero after taking ρ1.
Sample problems based on formulae derivation
Question 39. If the velocity of light (c), gravitational constant (G) and Planck's constant (h) are chosen as fundamental units, then the dimensions of mass in new system is
(a) c1/2G1/2h1/2 (b) c1/2G1/2h-1/2 (c) c1/2G-1/2h1/2 (d) c-1/2G1/2h1/2
Solution. (c) Let m ∝ cxGyhz or m = KcxGyhz. Substituting dimensions: [M1L0T0] = K[LT-1]x[M-1L3T-2]y[ML2T-1]z = [M-y+zLx+3y+2zT-x-2y-z]. Equating powers of M, L and T: -y + z = 1, x + 3y + 2z = 0, -x - 2y - z = 0. Solving: x = 1/2, y = -1/2 and z = 1/2. ∴ m ∝ c1/2G-1/2h1/2.
Teacher's Note: Three base constants give three equations in x, y, z; solve for exponents.
Exam Note: This combination gives the Planck mass √(hc/G).
Question 40. If the time period (T) of vibration of a liquid drop depends on surface tension (S), radius (r) of the drop and density (ρ) of the liquid, then the expression of T is
(a) T = K√(ρr3/S) (b) T = K√(ρ1/2r3/S) (c) T = K√(ρr3/S1/2) (d) None of these
Solution. (a) Let T ∝ Sxryρz or T = KSxryρz. Substituting: [M0L0T1] = K[MT-2]x[L]y[ML-3]z = [Mx+zLy-3zT-2x]. Equating powers of M, L and T: x + z = 0, y - 3z = 0, -2x = 1. Solving: x = -1/2, y = 3/2, z = 1/2. So T = KS-1/2r3/2ρ1/2 = K√(ρr3/S).
Teacher's Note: Surface tension has dimension MT-2, which fixes the time exponent first.
Exam Note: Get x from T exponent: -2x = 1.
Question 41. If P represents radiation pressure, C represents speed of light and Q represents radiation energy striking a unit area per second, then non-zero integers x, y and z such that PxQyCz is dimensionless, are [AFMC 1991; CBSE 1992; CPMT 1981, 92; MP PMT 1992]
(a) x = 1, y = 1, z = -1 (b) x = 1, y = -1, z = 1 (c) x = -1, y = 1, z = 1 (d) x = 1, y = 1, z = 1
Solution. (b) [PxQyCz] = M0L0T0. Substituting: [ML-1T-2]x[MT-3]y[LT-1]z = [Mx+yL-x+zT-2x-3y-z] = M0L0T0. Equating powers of M, L and T: x + y = 0, -x + z = 0 and -2x - 3y - z = 0. Solving: x = 1, y = -1, z = 1.
Teacher's Note: Q is energy per area per time, i.e. intensity, with dimension MT-3.
Exam Note: Check: PC/Q is dimensionless since P = I/c.
Question 42. The volume V of water passing through a point of a uniform tube during t seconds is related to the cross-sectional area A of the tube and velocity u of water by the relation V ∝ Aαuβtγ, which one of the following will be true
(a) α = β = γ (b) α ≠ β = γ (c) α = β ≠ γ (d) α ≠ β ≠ γ
Solution. (b) Writing dimensions of both sides: [L3] = [L2]α[LT-1]β[T]γ ⇒ [L3T0] = [L2α+βTγ-β]. Comparing powers: 2α + β = 3 and γ - β = 0, which give β = γ and α = (3 - β)/2, i.e. α ≠ β = γ.
Teacher's Note: T exponent forces β = γ; L exponent then fixes α separately.
Exam Note: Dimensions alone give β = γ; α is not equal.
Question 43. If velocity (V), force (F) and energy (E) are taken as fundamental units, then dimensional formula for mass will be
(a) V-2F0E (b) V0FE2 (c) VF-2E0 (d) V-2F0E
Solution. (d) Let M = VaFbEc. Putting dimensions: [M] = [LT-1]a[MLT-2]b[ML2T-2]c. Equating powers: b + c = 1, a + b + 2c = 0 and -a - 2b - 2c = 0. Solving: a = -2, b = 0 and c = 1. So M = [V-2F0E].
Teacher's Note: Equate M, L, T exponents; three unknowns, three equations.
Exam Note: Sanity check: E/V2 has dimension of mass (E = ½mv2).
Question 44. Given that the amplitude A of scattered light is: (i) Directly proportional to the amplitude (A0) of incident light. (ii) Directly proportional to the volume (V) of the scattering particle (iii) Inversely proportional to the distance (r) from the scattered particle (iv) Depend upon the wavelength (λ) of the scattered light. then:
(a) A ∝ 1/λ (b) A ∝ 1/λ2 (c) A ∝ 1/λ3 (d) A ∝ 1/λ4
Solution. (b) Let A = KA0Vλx/r. Substituting dimensions: [L] = [L]·[L3][Lx]/[L] ⇒ [L] = [L3+x]; ∴ 3 + x = 1 or x = -2. ∴ A ∝ λ-2.
Teacher's Note: Amplitude has dimension L; the A0 and 1/r factors cancel each other.
Exam Note: Only the powers of L matter here.
Sample problems based on significant figures
Question 45. Each side a cube is measured to be 7.203 m. The volume of the cube up to appropriate significant figures is
(a) 373.714 (b) 373.71 (c) 373.7 (d) 373
Solution. (c) Volume = a3 = (7.203)3 = 373.71 m3 (the book prints the side as 7.023 and 373.715 in the working; Corrected: using the given side 7.203 m, the cube is 373.71 m3). In significant figures the volume of the cube will be 373.7 m3 because its side has four significant figures.
Teacher's Note: A product keeps as many significant figures as the least precise factor.
Exam Note: Side has four significant figures, so give four.
Question 46. The number of significant figures in 0.007 m2 is
(a) 1 (b) 2 (c) 3 (d) 4
Solution. (a) Leading zeros are never significant, so 0.007 has one significant figure.
Teacher's Note: Zeros to the left of the first non-zero digit do not count.
Exam Note: 0.007 equals 7 × 10-3: one significant figure.
Question 47. The length, breadth and thickness of a block are measured as 125.5 cm, 5.0 cm and 0.32 cm respectively. Which one of the following measurements is most accurate
(a) Length (b) Breadth (c) Thickness (d) Height
Solution. (a) Relative error in measurement of length is minimum, so this measurement is most accurate.
Teacher's Note: Accuracy is judged by relative error (least count/value); more significant figures mean smaller relative error.
Exam Note: Length has most significant figures, so least relative error.
Question 48. The mass of a box is 2.3 kg. Two marbles of masses 2.15 g and 12.39 g are added to it. The total mass of the box to the correct number of significant figures is
(a) 2.340 kg (b) 2.3145 kg (c) 2.3 kg (d) 2.31 kg
Solution. (c) Total mass = 2.3 + 0.00215 + 0.01239 = 2.31 kg (more precisely 2.31454 kg). Total mass in appropriate significant figures is 2.3 kg.
Teacher's Note: In addition, round to the fewest decimal places: 2.3 kg has one.
Exam Note: Convert grams to kg first, then round to one decimal.
Question 49. The length of a rectangular sheet is 1.5 cm and breadth is 1.203 cm. The area of the face of rectangular sheet to the correct no. of significant figures is :
(a) 1.8045 cm2 (b) 1.804 cm2 (c) 1.805 cm2 (d) 1.8 cm2
Solution. (d) Area = 1.5 × 1.203 = 1.8045 cm2 = 1.8 cm2 (up to correct number of significant figures).
Teacher's Note: Multiplication: keep the least number of significant figures, here two from 1.5.
Exam Note: Least precise factor 1.5 limits answer to two figures.
Question 50. Each side of a cube is measured to be 5.402 cm. The total surface area and the volume of the cube in appropriate significant figures are :
(a) 175.1 cm2, 157 cm2 (b) 175.1 cm2, 157.6 cm3 (c) 175 cm2, 157 cm2 (d) 175.08 cm2, 157.639 cm3
Solution. (b) Total surface area = 6 × (5.402)2 = 175.09 cm2 = 175.1 cm2 (up to correct number of significant figures). Total volume = (5.402)3 = 157.64 cm3 = 157.6 cm3 (up to correct number of significant figures). (The book prints the volume working as 175.64; Corrected: (5.402)3 = 157.64.)
Teacher's Note: The side has four significant figures, so area and volume are both rounded to four.
Exam Note: The factor 6 is exact; it does not limit figures.
Question 51. Taking into account the significant figures, what is the value of 9.99 m + 0.0099 m
(a) 10.00 m (b) 10 m (c) 9.9999 m (d) 10.0 m
Solution. (a) 9.99 m + 0.0099 m = 9.9999 m = 10.00 m (in proper significant figures). (The book prints the sum as 9.999 m; Corrected: the sum is 9.9999 m, which rounds to 10.00 m.)
Teacher's Note: Addition keeps the fewest decimal places: 9.99 has two, so 10.00.
Exam Note: Round to two decimal places, not by significant figures.
Question 52. The value of the multiplication 3.124 × 4.576 correct to three significant figures is
(a) 14.295 (b) 14.3 (c) 14.295424 (d) 14.305
Solution. (b) 3.124 × 4.576 = 14.295 (more exactly 14.295424) = 14.3 (correct to three significant figures).
Teacher's Note: Three significant figures means count digits from the first non-zero digit.
Exam Note: Round 14.295 to 14.3, a three-figure answer.
Question 53. The number of the significant figures in 11.118 × 10-6 V is
(a) 3 (b) 4 (c) 5 (d) 6
Solution. (c) The number of significant figures is 5 as 10-6 does not affect this number.
Teacher's Note: Only the numerical portion in exponential notation counts.
Exam Note: Powers of ten never change significant-figure count.
Question 54. If the value of resistance is 10.845 ohms and the value of current is 3.23 amperes, the potential difference is 35.02935 volts. Its value in significant number would be
(a) 35 V (b) 35.0 V (c) 35.03 V (d) 35.025 V
Solution. (b) Value of current (3.23 A) has minimum significant figures (3), so the value of potential difference V (= IR) have only 3 significant figures. Hence its value be 35.0 V.
Teacher's Note: The product takes the lowest significant figures among factors: three here.
Exam Note: Keep the trailing zero: 35.0 shows three figures.
Sample problems based on errors of measurement
Question 55. A physical parameter a can be determined by measuring the parameters b, c, d and e using the relation a = bαcβ/dγeδ. If the maximum errors in the measurement of b, c, d and e are b1%, c1%, d1% and e1%, then the maximum error in the value of a determined by the experiment is [CPMT 19..]
(a) (b1 + c1 + d1 + e1)% (b) (b1 + c1 - d1 - e1)% (c) (αb1 + βc1 - γd1 - δe1)% (d) (αb1 + βc1 + γd1 + δe1)%
Solution. (d) a = bαcβ/dγeδ. So maximum error in a is given by (Δa/a × 100)max = α·(Δb/b × 100) + β·(Δc/c × 100) + γ·(Δd/d × 100) + δ·(Δe/e × 100) = (αb1 + βc1 + γd1 + δe1)%.
Teacher's Note: Each factor contributes its percentage error times its power; errors always add.
Exam Note: Division does not subtract errors; maximum error adds all.
Question 56. The pressure on a square plate is measured by measuring the force on the plate and the length of the sides of the plate. If the maximum error in the measurement of force and length are respectively 4% and 2%, The maximum error in the measurement of pressure is
(a) 1% (b) 2% (c) 6% (d) 8%
Solution. (d) P = F/A = F/l2, so maximum error in pressure (P): (ΔP/P × 100)max = ΔF/F × 100 + 2 × Δl/l × 100 = 4% + 2 × 2% = 8%.
Teacher's Note: Area is l2, so the length error counts twice.
Exam Note: Percentage errors: add, with powers as multipliers.
Question 57. The relative density of material of a body is found by weighing it first in air and then in water. If the weight in air is (5.00 ± 0.05) Newton and weight in water is (4.00 ± 0.05) Newton. Then the relative density along with the maximum permissible percentage error is
(a) 5.0 ± 11% (b) 5.0 ± 1% (c) 5.0 ± 6% (d) 1.25 ± 5%
Solution. (a) Weight in air = (5.00 ± 0.05) N. Weight in water = (4.00 ± 0.05) N. Loss of weight in water = (1.00 ± 0.1) N. Relative density = weight in air/weight loss in water, i.e. R.D. = (5.00 ± 0.05)/(1.00 ± 0.1). With maximum permissible error = 5.00 ± (0.05/5.00 + 0.1/1.00) × 100 = 5.0 ± (1 + 10)% = 5.0 ± 11%.
Teacher's Note: Errors in a difference add absolutely (0.05 + 0.05), then convert to percentage.
Exam Note: Do not subtract errors in weight loss; add them.
Question 58. The resistance R = V/i where V = 100 ± 5 volts and i = 10 ± 0.2 amperes. What is the total error in R
(a) 5% (b) 7% (c) 5.2% (d) (5/2)%
Solution. (b) R = V/I, ∴ (ΔR/R × 100)max = ΔV/V × 100 + ΔI/I × 100 = (5/100) × 100 + (0.2/10) × 100 = (5 + 2)% = 7%.
Teacher's Note: For a quotient, add fractional errors of numerator and denominator.
Exam Note: Convert each error to percentage first, then add.
Question 59. The period of oscillation of a simple pendulum in the experiment is recorded as 2.63 s, 2.56 s, 2.42 s, 2.71 s and 2.80 s respectively. The average absolute error is
(a) 0.1 s (b) 0.11 s (c) 0.01 s (d) 1.0 s
Solution. (b) Average value = (2.63 + 2.56 + 2.42 + 2.71 + 2.80)/5 = 2.62 sec. Now |ΔT1| = 2.63 - 2.62 = 0.01, |ΔT2| = 2.62 - 2.56 = 0.06, |ΔT3| = 2.62 - 2.42 = 0.20, |ΔT4| = 2.71 - 2.62 = 0.09, |ΔT5| = 2.80 - 2.62 = 0.18. Mean absolute error ΔT = (0.01 + 0.06 + 0.20 + 0.09 + 0.18)/5 = 0.54/5 = 0.108 = 0.11 sec.
Teacher's Note: Take mean first, then average the magnitudes of deviations from it.
Exam Note: Use absolute values of deviations; do not let signs cancel.
Question 60. The length of a cylinder is measured with a meter rod having least count 0.1 cm. Its diameter is measured with venier calipers having least count 0.01 cm. Given that length is 5.0 cm. and radius is 2.0 cm. The percentage error in the calculated value of the volume will be
(a) 1% (b) 2% (c) 3% (d) 4%
Solution. (c) Volume of cylinder V = πr2l. Percentage error in volume ΔV/V × 100 = 2Δr/r × 100 + Δl/l × 100 = (2 × 0.01/2.0 × 100 + 0.1/5.0 × 100) = (1 + 2)% = 3%.
Teacher's Note: Radius is squared, so its percentage error is doubled before adding.
Exam Note: Least count gives each error directly.
Question 61. In an experiment, the following observation's were recorded : L = 2.820 m, M = 3.00 kg, l = 0.087 cm, Diameter D = 0.041 cm Taking g = 9.81 m/s2 using the formula, Y = 4MgL/(πD2l), the maximum permissible error in Y is
(a) 7.96% (b) 4.56% (c) 6.50% (d) 8.42%
Solution. (c) Y = 4MgL/(πD2l), so maximum permissible error in Y = ΔY/Y × 100 = (ΔM/M + Δg/g + ΔL/L + 2ΔD/D + Δl/l) × 100. Taking the last digit of each reading as its error: = (0.01/3.00 + 0.01/9.81 + 0.001/2.820 + 2 × 0.001/0.041 + 0.001/0.087) × 100 = (1/300 + 1/981 + 1/2820 + 2/41 + 1/87) × 100 = 0.065 × 100 = 6.5%. (Corrected: the fractions printed in the book are garbled; the denominators 9.81 and 9820 should read 981 and 2820; the result 6.5% is unchanged.)
Teacher's Note: D is squared, so its error counts twice and dominates the total.
Exam Note: Add all fractional errors; D2 doubles the diameter term.
Question 62. According to Joule's law of heating, heat produced H = I2Rt, where I is current, R is resistance and t is time. If the errors in the measurement of I, R and t are 3%, 4% and 6% respectively then error in the measurement of H is
(a) ± 17% (b) ± 16% (c) ± 19% (d) ± 25%
Solution. (b) H = I2Rt, ∴ ΔH/H × 100 = (2ΔI/I + ΔR/R + Δt/t) × 100 = (2 × 3 + 4 + 6)% = 16%.
Teacher's Note: Current is squared, so its 3% error becomes 6%.
Exam Note: Power times percentage error, then add: 6 + 4 + 6.
Question 63. If there is a positive error of 50% in the measurement of velocity of a body, then the error in the measurement of kinetic energy is
(a) 25% (b) 50% (c) 100% (d) 125%
Solution. (c) Kinetic energy E = (1/2)mv2, ∴ ΔE/E × 100 = (Δm/m + 2Δv/v) × 100. Here Δm = 0 and Δv/v × 100 = 50%, ∴ ΔE/E × 100 = 2 × 50 = 100%.
Teacher's Note: Error rule (n × percentage error) is for small errors; this is the book method.
Exam Note: Velocity squared doubles its percentage error: 2 × 50 = 100%.
Question 64. A physical quantity P is given by P = A3B1/2/(C-4D3/2). The quantity which brings in the maximum percentage error in P is
(a) A (b) B (c) C (d) D
Solution. (c) Quantity C has maximum power. So it brings maximum error in P.
Teacher's Note: Contribution to error is power times percentage error; compare powers 3, 1/2, 4, 3/2.
Exam Note: Largest power (modulus) gives largest error contribution: C.
Problems based on units and dimensions
Practice Problem 1. Number of base SI units is [MP PET 2003]
(a) 4 (b) 7 (c) 3 (d) 5
Solution. (b) 7. The SI has seven base units: metre, kilogram, second, ampere, kelvin, mole, candela.
Teacher's Note: Seven base quantities, plus two supplementary units (radian, steradian) in older texts.
Exam Note: Do not count supplementary units; answer is seven.
Practice Problem 2. The unit of Planck's constant is [RPMT 1999; MP PET 2003]
(a) Joule (b) Joule/s (c) Joule/m (d) Joule-s
Solution. (d) Joule-s. Since E = hν, h = E/ν has unit J/s-1 = joule-second.
Teacher's Note: Use E = hν: energy divided by frequency gives joule-second.
Exam Note: Same unit as angular momentum.
Practice Problem 3. The unit of reactance is [MP PET 2003]
(a) Ohm (b) Volt (c) Mho (d) Newton
Solution. (a) Ohm. Reactance opposes current like resistance, so its unit is the ohm.
Teacher's Note: Reactance X = V/I, like resistance, hence ohm.
Exam Note: Mho is conductance, the inverse unit.
Practice Problem 4. The dimension of R/L are [MP PET 2003]
(a) T2 (b) T (c) T-1 (d) T-2
Solution. (c) T-1. L/R is the time constant with dimension T, so R/L has dimension T-1.
Teacher's Note: L/R is the LR time constant, a time; its inverse is T-1.
Exam Note: Remember L/R and RC both have dimension T.
Practice Problem 5. Dimensions of potential energy are [MP PET 2003]
(a) MLT-1 (b) ML2T-2 (c) ML-1T-2 (d) ML-1T-1
Solution. (b) ML2T-2. Potential energy is mgh = M · LT-2 · L.
Teacher's Note: Same dimensions as work and all forms of energy: force times length.
Exam Note: Option (c) is pressure, not energy.
Practice Problem 6. The dimensions of electric potential are [UPSEAT 2003]
(a) [ML2T-2Q-1] (b) [MLT-2Q-1] (c) ML2T-1Q (d) ML2T-2Q
Solution. (a) [ML2T-2Q-1]. Potential = work/charge = ML2T-2/Q.
Teacher's Note: Potential is energy per unit charge; divide ML2T-2 by Q.
Exam Note: Option (b) is electric field.
Practice Problem 7. The physical quantities not having same dimensions are [AIEEE 2003]
(a) Speed and (μ0ε0)-1/2 (b) Torque and work (c) Momentum and Planck's constant (d) Stress and Young's modulus
Solution. (c) Momentum and Planck's constant. Momentum is MLT-1, Planck's constant is ML2T-1. (μ0ε0)-1/2 = c is a speed.
Teacher's Note: Check each pair; only momentum and h differ by a factor of length.
Exam Note: Torque and work share dimensions despite different nature.
Practice Problem 8. The dimensional formula for Boltzmann's constant is [MP PET 2002]
(a) [ML2T-2θ-1] (b) [ML2T-2] (c) [ML0T-2θ-1] (d) [ML2T-1θ-1]
Solution. (a) [ML2T-2θ-1]. From E = kT, k = energy/temperature = ML2T-2θ-1.
Teacher's Note: k = E/T, so energy dimensions divided by temperature.
Exam Note: Option (b) lacks the temperature dimension.
Practice Problem 9. Which of the following quantities is dimensionless [MP PET 2002]
(a) Gravitational constant (b) Planck's constant (c) Power of a convex lens (d) None of these
Solution. (d) None of these. G is M-1L3T-2, h is ML2T-1, and lens power is L-1, so none is dimensionless.
Teacher's Note: Lens power is 1/f, dimension L-1, not dimensionless.
Exam Note: Check each: only ratios of like quantities are dimensionless.
Practice Problem 10. Which of the two have same dimensions [AIEEE 2002]
(a) Force and strain (b) Force and stress (c) Angular velocity and frequency (d) Energy and strain
Solution. (c) Angular velocity and frequency. Angular velocity and frequency both have dimension T-1.
Teacher's Note: Strain is dimensionless; stress is force per area, unlike force.
Exam Note: Both are T-1 though they differ by 2π.
Practice Problem 11. The dimensions of pressure is equal to [AIEEE 2002]
(a) Force per unit volume (b) Energy per unit volume (c) Force (d) Energy
Solution. (b) Energy per unit volume. Pressure = force/area = ML-1T-2, same as energy/volume (ML2T-2/L3).
Teacher's Note: Energy density and pressure share dimensions ML-1T-2.
Exam Note: Force per volume is a different quantity: ML-2T-2.
Practice Problem 12. Identify the pair whose dimensions are equal [AIEEE 2002]
(a) Torque and work (b) Stress and energy (c) Force and stress (d) Force and work
Solution. (a) Torque and work. Torque and work both have dimensions ML2T-2.
Teacher's Note: Torque is force times perpendicular distance, like work.
Exam Note: Different physical nature, same dimensions.
Practice Problem 13. A physical quantity x depends on quantities y and z as follows: x = Ay + B tan Cz, where A, B and C are constants. Which of the following do not have the same dimensions [AMU (Eng.) 2001]
(a) x and B (b) C and z-1 (c) y and B/A (d) x and A
Solution. (d) x and A. tan Cz is dimensionless, so Cz is dimensionless (C and z-1 match), and B has the dimensions of x, while Ay has the dimensions of x, so A has dimensions of x/y; hence x and A differ.
Teacher's Note: Terms added must match x; the argument of tan is dimensionless.
Exam Note: Argument of a trigonometric function is always dimensionless.
Practice Problem 14. ML3T-1Q-2 is dimension of [RPET 2000]
(a) Resistivity (b) Conductivity (c) Resistance (d) None of these
Solution. (a) Resistivity. Resistance = V/I = ML2T-1Q-2; resistivity = RA/l = ML3T-1Q-2.
Teacher's Note: Resistivity is resistance times length; add L to ML2T-1Q-2.
Exam Note: Conductivity would be the inverse dimensions.
Practice Problem 15. Two quantities A and B have different dimensions. Which mathematical operation given below is physically meaningful [CPMT 1997]
(a) A/B (b) A + B (c) A - B (d) None of these
Solution. (a) A/B. Only quantities of the same dimensions can be added or subtracted; division is always allowed.
Teacher's Note: Addition and subtraction need identical dimensions; multiplication and division do not.
Exam Note: Ratios of unlike quantities, e.g. speed, are meaningful.
Practice Problem 16. Let [ε0] denotes the dimensional formula of the permittivity of the vacuum and [μ0] that of the permeability of the vacuum. If M = mass, L = length, T = time and I = electric current, then
(a) [ε0] = M-1L-3T2I (b) [ε0] = M-1L-3T4I2 (c) [μ0] = MLT-2I-2 (d) [μ0] = ML2T-1I
Solution. (c) [μ0] = MLT-2I-2. The book key gives (c): [μ0] = MLT-2I-2. Note: [ε0] = M-1L-3T4I2 in option (b) is also dimensionally correct.
Teacher's Note: Get μ0 from F/l = μ0I2/(2πd): MLT-2I-2.
Exam Note: Check (b) too; verify each option.
Practice Problem 17. The dimension of quantity (L/RCV) is [Roorkee 1994]
(a) [A] (b) [A]2 (c) [A-1] (d) None of these
Solution. (c) [A-1]. L/R has dimension of time [T] and CV is charge [Q = AT], so L/(RCV) = T/(AT) = A-1.
Teacher's Note: L/R is time; CV is charge; time per charge is inverse current.
Exam Note: Treat L/(RCV) as (L/R) divided by CV.
Practice Problem 18. The quantity X = ε0LV/t; here ε0 is the permittivity of free space, L is length, V is potential difference and t is time. The dimensions of X are same as that of
(a) Resistance (b) Charge (c) Voltage (d) Current
Solution. (d) Current. ε0L has dimensions of capacitance, times V gives charge, divided by t gives charge/time = current.
Teacher's Note: ε0L is capacitance (C ~ ε0A/d); CV is charge; charge/t is current.
Exam Note: Chain: capacitance, charge, current.
Practice Problem 19. The unit of permittivity of free space ε0 is [MP PET 1993; MP PMT 2003]
(a) Coulomb/Newton-metre (b) Newton-metre2/Coulomb2 (c) Coulomb2/(Newton-metre)2 (d) Coulomb2/Newton-metre2
Solution. (d) Coulomb2/Newton-metre2. From F = q1q2/(4πε0r2), ε0 = q2/(F r2), unit C2/(N m2).
Teacher's Note: Invert Coulomb's law: ε0 = q2/(4πFr2).
Exam Note: Option (b) is the unit of 1/ε0.
Practice Problem 20. Dimensional formula of capacitance is [CPMT 1978; MP PMT 1979; IIT-JEE 1983]
(a) M-1L-2T4A2 (b) ML2T4A-2 (c) MLT-4A2 (d) M-1L-2T-4A-2
Solution. (a) M-1L-2T4A2. C = Q/V = AT/(ML2T-3A-1) = M-1L-2T4A2.
Teacher's Note: C = Q/V with Q = AT and V = ML2T-3A-1.
Exam Note: Learn: capacitance M-1L-2T4A2.
Practice Problem 21. Dimensional formula for impulse is [EAMCET 1981; CBSE PMT 1991; CPMT 1978; AFMC 1998; BCECE 2003]
(a) MLT-2 (b) MLT-1 (c) ML2T (d) M2LT-1
Solution. (b) MLT-1. Impulse = force × time = MLT-2 × T = MLT-1.
Teacher's Note: Impulse equals change in momentum, so MLT-1.
Exam Note: Same dimensions as momentum.
Practice Problem 22. The dimensions of universal gravitational constant are [MP PMT 1984, 87, 97, 2000; CBSE PMT 1988, 92, 2004; MP PET 1984, 96, 99; MNR 1992; DPMT 1984; CPMT 1978, 84, 89, 90, 92, 96; AFMC 1999; NCERT 1975; DPET 1993; AIIMS 2002; RPET 2001; Pb. PMT 2002; UPSEAT 1999; BCECE 2003]
(a) M-2L2T-2 (b) M-1L3T-2 (c) ML-1T-2 (d) ML2T-1
Solution. (b) M-1L3T-2. From F = Gm1m2/r2, G = Fr2/m2 = MLT-2L2/M2 = M-1L3T-2.
Teacher's Note: Rearrange Newton's law of gravitation for G and substitute dimensions.
Exam Note: Often asked; memorise M-1L3T-2.
Practice Problem 23. How many wavelength of Kr86 are there in one metre [MNR 1985; UPSEAT 2000]
(a) 1553164.13 (b) 1650763.73 (c) 652189.63 (d) 2348123.73
Solution. (b) 1650763.73. The metre was defined as 1650763.73 wavelengths of the orange-red line of Kr86 in vacuum.
Teacher's Note: This is the old (1960) definition of the metre; a memory fact.
Exam Note: Value to remember: 1650763.73.
Practice Problem 24. Light year is a unit of [MP PMT 1989; AFMC 1991; CPMT 1991]
(a) Time (b) mass (c) Distance (d) Energy
Solution. (c) Distance. A light year is the distance travelled by light in one year.
Teacher's Note: The word year misleads; light year is distance = c × 1 year.
Exam Note: Light year is a distance, not time.
Practice Problem 25. L, C and R represent physical quantities inductance, capacitance and resistance respectively. The combination which has the dimensions of frequency is [IIT-JEE 1984]
(a) 1/RC and R/L (b) 1/√RC and √(R/L) (c) 1/√LC (d) C/L
Solution. (a) 1/RC and R/L. RC and L/R both have dimension of time, so 1/RC and R/L have dimension T-1, i.e. frequency. Book key: (a). Note: 1/√(LC) in option (c) is also of dimension T-1.
Teacher's Note: Both RC and L/R are times; LC is T2, so 1/√LC also works.
Exam Note: Check each combination reduces exactly to T-1.
Practice Problem 26. In the relation P = (α/β) e-αz/kθ, P is pressure, z is distance, k is Boltzmann constant and θ is temperature. The dimensional formula of β will be [IIT-JEE (Screening) 2004]
(a) [M0L2T0] (b) [M1L2T1] (c) [M1L0T0] (d) [M0L2T1]
Solution. (a) [M0L2T0]. αz/kθ is dimensionless, so [α] = [kθ]/[z] = MLT-2. Then [β] = [α]/[P] = MLT-2/ML-1T-2 = L2.
Teacher's Note: Exponent is dimensionless, giving α; then β = α/P.
Exam Note: Set exponent dimensionless first; then solve for β.
Practice Problem 27. If the acceleration due to gravity be taken as the unit of acceleration and the velocity generated in a falling body in one second as the unit of velocity then
(a) The new unit of length is g metre (b) The new unit of length is 1 metre (c) The new unit of length is g2 metre (d) The new unit of time is (1/g) second
Solution. (a) The new unit of length is g metre. New unit of acceleration = g m/s2, new unit of velocity = g × 1 = g m/s. Unit of time = velocity/acceleration = 1 s, and unit of length = velocity × time = g metre.
Teacher's Note: Unit time = unit velocity/unit acceleration; unit length = unit velocity × unit time.
Exam Note: Time unit stays 1 s; only length changes.
Practice Problem 28. The famous Stefan's law of radiation states that the rate of emission of thermal radiation per unit by a black body is proportional to area and fourth power of its absolute temperature that is Q = σAT4 where A = area, T = temperature and σ is a universal constant. In the 'energy-length-time-temperature' (E-L-T-K) system the dimension of σ is
(a) E2T2L-2K-2 (b) E-1T-2L-2K1 (c) ET-1L-3K-4 (d) ET-1L-2K-4
Solution. (d) ET-1L-2K-4. Q is energy per unit time: [Q] = ET-1 = [σ]L2K4, so [σ] = ET-1L-2K-4.
Teacher's Note: Q is energy emitted per unit time, so divide ET-1 by area (L2) and K4.
Exam Note: Power = E/T; area contributes L2.
Practice Problem 29. The resistive force acting on a body moving with a velocity V through a fluid at rest is given by F = CDV2Aρ where, CD = coefficient of drag, A = area of cross-section perpendicular to the direction of motion. The dimensions of CD are
(a) ML3T-2 (b) M-1L-1T2 (c) M-1L-1T-2 (d) M0L0T0
Solution. (d) M0L0T0. V2Aρ = L2T-2 · L2 · ML-3 = MLT-2, same as F, so CD is dimensionless.
Teacher's Note: Substitute dimensions of V2, A and ρ; they reproduce force, so CD is a pure number.
Exam Note: Drag coefficient has no dimensions.
Practice Problem 30. The dimensions of (angular momentum)/(magnetic moment) are :
(a) [M3LT-2A2] (b) [MA-1T-1] (c) [ML2A-2T] (d) [M2L-3AT2]
Solution. (b) [MA-1T-1]. Angular momentum = ML2T-1; magnetic moment = IA = AL2 (ampere-metre2). Ratio = ML2T-1/(A L2) = MA-1T-1.
Teacher's Note: Magnetic moment is current times area; L2 cancels in the ratio.
Exam Note: Note A denotes ampere here, not area.
Practice Problem 31. The frequency n of vibrations of uniform string of length l and stretched with a force F is given by n = (p/2l)√(F/m) where p is the number of segments of the vibrating string and m is a constant of the string. What are the dimensions of m
(a) ML-1T-1 (b) ML-3T0 (c) ML-2T0 (d) ML-1T0
Solution. (d) ML-1T0. Squaring: n2 = p2F/(4l2m), so [m] = [F]/([n2][l2]) = MLT-2/(T-2L2) = ML-1.
Teacher's Note: m is mass per unit length (linear density); p is a pure number.
Exam Note: Linear density has dimension ML-1.
Practice Problem 32. Choose the wrong statement(s)
(a) A dimensionally correct equation may be correct (b) A dimensionally correct equation may be incorrect (c) A dimensionally incorrect equation may be incorrect (d) A dimensionally incorrect equation may be incorrect
Solution. (c) A dimensionally incorrect equation may be incorrect. Book key: (c). Note: options (c) and (d) are printed identically in the source. The false statement in this set would be that a dimensionally incorrect equation may be correct, since a dimensionally incorrect equation is always wrong.
Teacher's Note: Dimensionally correct equations may or may not be physically true; incorrect ones are always wrong.
Exam Note: A dimensionally wrong equation can never be correct.
Practice Problem 33. A certain body of mass M moves under the action of a conservative force with potential energy V given by V = Kr/(x2 + a2) where x is the displacement and a is the amplitude. The units of K are
(a) Watt (b) Joule (c) Joule-metre (d) None of these
Solution. (c) Joule-metre. Taking the numerator factor as a length, V = K·(length)/(length)2, so K = V × length = joule-metre.
Teacher's Note: Denominator is L2, numerator length, so K carries energy times length.
Exam Note: Match dimensions of V on both sides.
Practice Problem 34. The Richardson equation is given by I = AT2e-B/kT. The dimensional formula for AB2 is same as that for
(a) IT2 (b) kT (c) IK2 (d) IK2/T
Solution. (c) IK2. B/kT is dimensionless, so [B] = [kT]. Also [A] = [I]/[T2]. So [AB2] = [I][k2T2]/T2 = [Ik2].
Teacher's Note: Exponent must be dimensionless, so B has dimensions of kT; then A from I/T2.
Exam Note: Substitute B = kT, then T2 cancels.
Practice Problem 35. If the units of force, energy and velocity are 10 N, 100 J and 5 ms-1, the units of length, mass and time will be
(a) 10 m, 5 kg, 1 s (b) 10 m, 4 kg, 2 s (c) 10 m, 4 kg, 0.5 s (d) 20 m, 5 kg, 2 s
Solution. (b) 10 m, 4 kg, 2 s. Unit of length = E/F = 100/10 = 10 m. Unit of time = L/v = 10/5 = 2 s. Unit of mass = F T2/L = 10 × 4/10 = 4 kg.
Teacher's Note: Length from E = Fl; time from v = l/t; mass from F = ml/t2.
Exam Note: Find length first, then time, then mass.
Practice Problem 36. The period of oscillation of a simple pendulum is given by T = 2π√(l/g) where l is about 100 cm and is known to 1 mm accuracy. The period is about 2 s. The time of 100 oscillations is measured by a stop watch of least count 0.1 s. The percentage error in g is
(a) 0.1% (b) 1% (c) 0.2% (d) 0.8%
Solution. (c) 0.2%. g = 4π2l/T2, so Δg/g = Δl/l + 2ΔT/T = 0.1/100 + 2 × 0.1/200 = 0.001 + 0.001 = 0.002 = 0.2%.
Teacher's Note: Time for 100 oscillations is about 200 s, so ΔT/T = 0.1/200; T is squared.
Exam Note: Measuring many oscillations reduces the time error.
Practice Problem 37. The percentage errors in the measurement of mass and speed are 2% and 3% respectively. How much will be the maximum error in the estimation of the kinetic energy obtained by measuring mass and speed [NCERT 1990; Orissa JEE 1990]
(a) 11% (b) 8% (c) 5% (d) 1%
Solution. (b) 8%. K = (1/2)mv2, so ΔK/K = Δm/m + 2Δv/v = 2% + 2 × 3% = 8%.
Teacher's Note: Speed is squared, so its 3% is doubled to 6%, then add 2%.
Exam Note: Errors add: 2 + 6 = 8%.
Practice Problem 38. While measuring the acceleration due to gravity by a simple pendulum, a student makes a positive error of 1% in the length of the pendulum and a negative error of 3% in the value of time period. His percentage error in the measurement of g by the relation g = 4π2(l/T2) will be
(a) 2% (b) 4% (c) 7% (d) 10%
Solution. (c) 7%. Δg/g = Δl/l + 2ΔT/T = 1% + 2 × 3% = 7%.
Teacher's Note: Take magnitudes of errors; T is squared, so 3% becomes 6%.
Exam Note: Percentage errors add regardless of sign.
Practice Problem 39. The random error in the arithmetic mean of 100 observations is x; then random error in the arithmetic mean of 400 observations would be
(a) 4x (b) (1/4)x (c) 2x (d) (1/2)x
Solution. (d) (1/2)x. Random error in the mean is inversely proportional to √n. For 400 observations, √n is doubled (20 instead of 10), so the error becomes x/2.
Teacher's Note: Random error of the mean falls as 1/√n; quadrupling n halves it.
Exam Note: Error in mean varies as 1/√n, not 1/n.
Practice Problem 40. What is the number of significant figures in 0.310 × 103
(a) 2 (b) 3 (c) 4 (d) 6
Solution. (b) 3. The leading zero is not significant; 3, 1 and the trailing 0 after the decimal point are significant, so there are 3 significant figures. The factor 103 does not matter.
Teacher's Note: Trailing zero after the decimal point is significant; the leading zero is not.
Exam Note: Ignore the power of ten; count 3, 1, 0.
Practice Problem 41. Error in the measurement of radius of a sphere is 1%. The error in the calculated value of its volume is
(a) 1% (b) 3% (c) 5% (d) 7%
Solution. (b) 3%. V = (4/3)πr3, so ΔV/V = 3Δr/r = 3 × 1% = 3%.
Teacher's Note: Volume goes as r3, so the percentage error is tripled.
Exam Note: Power of the variable times its percentage error.
Practice Problem 42. The mean time period of second's pendulum is 2.00 s and mean absolute error on the time period is 0.05 s. To express maximum estimate of error, the time period should be written as
(a) (2.00 ± 0.01) s (b) (2.00 + 0.025) s (c) (2.00 ± 0.05) s (d) (2.00 ± 0.10) s
Solution. (c) (2.00 ± 0.05) s. The result is written as mean ± mean absolute error: (2.00 ± 0.05) s.
Teacher's Note: Result format is am ± mean absolute error; no extra doubling.
Exam Note: Write mean value ± mean absolute error.
Practice Problem 43. A body travels uniformly a distance of (13.8 ± 0.2) m in a time (4.0 ± 0.3) s. The velocity of the body within error limits is
(a) (3.45 ± 0.2) ms-1 (b) (3.45 ± 0.3) ms-1 (c) (3.45 ± 0.4) ms-1 (d) (3.45 ± 0.5) ms-1
Solution. (b) (3.45 ± 0.3) ms-1. v = 13.8/4.0 = 3.45 m/s. Δv/v = 0.2/13.8 + 0.3/4.0 = 0.0145 + 0.075 = 0.0895, so Δv = 0.0895 × 3.45 = 0.31 ≈ 0.3 m/s.
Teacher's Note: Quotient: add fractional errors, then multiply by the value.
Exam Note: Compute fractional error 0.0895, then times 3.45.
Practice Problem 44. The percentage error in the above problem is
(a) 7% (b) 5.95% (c) 8.95% (d) 9.85%
Solution. (c) 8.95%. Percentage error = (0.2/13.8 + 0.3/4.0) × 100 = 1.45% + 7.5% = 8.95%.
Teacher's Note: Percentage error is the fractional error from the previous problem times 100.
Exam Note: Same working as above: 0.0895 × 100.
Practice Problem 45. The unit of percentage error is
(a) Same as that of physical quantity (b) Different from that of physical quantity (c) Percentage error is unit less (d) Errors have got their own units which are different from that of physical quantity measured
Solution. (c) Percentage error is unit less. Percentage error is a ratio of like quantities times 100, so it is unitless.
Teacher's Note: Percentage error is a ratio, so no unit; absolute error shares the quantity's unit.
Exam Note: Absolute error has units; relative or percentage error has none.
Practice Problem 46. The decimal equivalent of 1/20 upto three significant figures is
(a) 0.0500 (b) 0.05000 (c) 0.0050 (d) 5.0 × 10-2
Solution. (a) 0.0500. 1/20 = 0.05; to three significant figures this is 0.0500.
Teacher's Note: Leading zeros do not count; 5, 0, 0 are the three significant figures.
Exam Note: Pad with trailing zeros to reach three figures.
Practice Problem 47. If 97.52 is divided by 2.54, the correct result in terms of significant figures is
(a) 38.4 (b) 38.3937 (c) 38.394 (d) 38.39
Solution. (a) 38.4. 97.52/2.54 = 38.394 and the least precise number 2.54 has three significant figures, so the result is 38.4.
Teacher's Note: Division keeps the fewest significant figures: 2.54 has three.
Exam Note: Round 38.394 to three figures.
Practice Problem 48. Accuracy of measurement is determined by
(a) Absolute error (b) Percentage error (c) Both (d) None of these
Solution. (b) Percentage error. Accuracy is judged by percentage (relative) error, since it compares error with the size of the measured value.
Teacher's Note: Smaller percentage error means higher accuracy; absolute error alone ignores magnitude.
Exam Note: Compare measurements by percentage error.
Practice Problem 49. The radius of a sphere is (5.3 ± 0.1) cm. The percentage error in its volume is
(a) (0.1/5.3) × 100 (b) 3 × (0.1/5.3) × 100 (c) (0.1 × 100)/3.53 (d) 3 + (0.1/5.3) × 100
Solution. (b) 3 × (0.1/5.3) × 100. V ∝ r3, so percentage error in V = 3 × (Δr/r) × 100 = 3 × (0.1/5.3) × 100.
Teacher's Note: Percentage error in volume is three times that in radius.
Exam Note: Multiply the radius percentage error by 3.
Practice Problem 50. A thin copper wire of length l metre increases in length by 2% when heated through 10°C. What is the percentage increase in area when a square copper sheet of length l metre is heated through 10°C
(a) 4% (b) 8% (c) 16% (d) None of the above
Solution. (a) 4%. Area of the square = l2, so the percentage increase in area = 2 × 2% = 4%.
Teacher's Note: Linear expansion of 2% doubles to about 4% in area (to first order).
Exam Note: Area goes as length squared: twice the percentage.
Free study material for Physics
Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Math
Access Class 11 Mathematics Solutions
Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Physics Chapter 19 Unit Dimensions And Measurement Part 2 tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Detailed Calculation Guides for Class 11
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Next Steps in Your Mathematics Revision
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.