Pradeep's KL Gogia Solutions Physics Chapter 19 Unit Dimensions And Measurement Part 1

Pradeep's KL Gogia Solutions for Class 11 Physics: Chapter 19 Unit Dimensions And Measurement

Explore reliable textbook solutions for Chapter 19 Unit Dimensions And Measurement tailored for Class 11 learners using Pradeep's KL Gogia methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice Class 11 Physics Solutions: Chapter 19 Unit Dimensions And Measurement

Access the complete solution PDF for Class 11 Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Units, Dimensions and Measurement - Problems 1 to 26

Sample problems based on unit finding

Question 1. The equation (P + a/V²)(V − b) = constant. The units of a is. (a) Dyne × cm⁵ (b) Dyne × cm⁴ (c) Dyne/cm³ (d) Dyne/cm²

Solution. (b). By the principle of dimensional homogeneity [P] = [a/V²], so [a] = [P][V²] = [ML−1T−2][L6] = [ML5T−2]. Unit of a = g × cm5 × s−2 = Dyne × cm4.

Teacher's Note: a/V² must have the dimensions of pressure, so [a] = [P][V²].

Exam Note: Homogeneity method; g cm s⁻² is a dyne.

Question 2. If x = at + bt², where x is the distance travelled by the body in kilometre while t the time in seconds, then the units of b are (a) km/s (b) km-s (c) km/s² (d) km-s²

Solution. (c). From the principle of dimensional homogeneity [x] = [bt²], so [b] = [x/t²]. Unit of b = km/s².

Teacher's Note: Every term must have the units of x, so b = x/t².

Exam Note: Write the homogeneity step to earn the mark.

Question 3. The unit of absolute permittivity is (a) Farad-meter (b) Farad/meter (c) Farad/meter² (d) Farad

Solution. (b). From the formula C = 4πε0R, ε0 = C/(4πR). Substituting the units of capacitance and radius, the unit of ε0 = Farad/meter.

Teacher's Note: Use the capacitance of an isolated sphere to isolate ε₀.

Exam Note: Remember ε₀ unit: F/m.

Question 4. Unit of Stefan's constant is (a) Js⁻¹ (b) Jm⁻²s⁻¹K⁻⁴ (c) Jm⁻² (d) Js

Solution. (b). Stefan's formula Q/(At) = σT⁴, so σ = Q/(AtT⁴). Unit of σ = Joule/(m² × sec × K⁴) = Jm−2s−1K−4.

Teacher's Note: Power per unit area divided by T⁴ gives the unit of σ.

Exam Note: Unit is W m⁻² K⁻⁴; write it fully.

Question 5. The unit of surface tension in SI system is (a) Dyne/cm² (b) Newton/m (c) Dyne/cm (d) Newton/m²

Solution. (b). From the formula of surface tension T = F/l, substituting the SI units of force and length, the unit of surface tension = Newton/m.

Teacher's Note: Surface tension is force per unit length, not per unit area.

Exam Note: Do not confuse N/m with N/m² (pressure).

Question 6. A suitable unit for gravitational constant is (a) kg metre sec⁻¹ (b) Newton metre⁻¹ sec (c) Newton metre² kg⁻² (d) kg metre sec⁻¹

Solution. (c). As F = Gm1m2/r², G = Fr²/(m1m2). Substituting the units of the quantities, unit of G = Newton metre² kg−2.

Teacher's Note: Rearrange Newton's law of gravitation for G and insert units.

Exam Note: Unit N m² kg⁻²; dimensions M⁻¹L³T⁻².

Question 7. The SI unit of universal gas constant (R) is (a) Watt K⁻¹mol⁻¹ (b) Newton K⁻¹mol⁻¹ (c) Joule K⁻¹mol⁻¹ (d) Erg K⁻¹mol⁻¹

Solution. (c). Ideal gas equation PV = nRT, so [R] = [P][V]/([n][T]) = [ML−1T−2][L3]/([mole][K]) = [ML2T−2]/([mole][K]). So the unit will be Joule K−1mol−1.

Teacher's Note: PV has the dimensions of energy, so R is energy per mole per kelvin.

Exam Note: SI, not CGS: joule, not erg.

Sample problems based on dimension finding

Question 8. X = 3YZ², find dimension of Y in MKSA system, if X and Z are the dimension of capacity and magnetic field respectively. (a) M⁻³L⁻²T⁻⁴A⁻¹ (b) ML⁻² (c) M⁻³L⁻²T⁴A⁴ (d) M⁻³L⁻²T⁸A⁴

Solution. (d). X = 3YZ², so [Y] = [X]/[Z²] = [M−1L−2T4A2]/[MT−2A−1]2 = [M−3L−2T8A4].

Teacher's Note: Capacitance is M⁻¹L⁻²T⁴A²; magnetic field is MT⁻²A⁻¹; the factor 3 is dimensionless.

Exam Note: Square the dimensions of Z, then divide; watch the signs.

Question 9. Dimensions of 1/(μ0ε0), where symbols have their usual meaning, are (a) [LT⁻¹] (b) [L⁻¹T] (c) [L⁻²T²] (d) [L²T⁻²]

Solution. (d). We know that velocity of light C = 1/√(μ0ε0), so 1/(μ0ε0) = C². So [1/(μ0ε0)] = [LT−1]2 = [L2T−2].

Teacher's Note: 1/(μ₀ε₀) = c², the square of the speed of light.

Exam Note: Squared velocity: do not stop at LT⁻¹.

Question 10. If L, C and R denote the inductance, capacitance and resistance respectively, the dimensional formula for C²LR is (a) [ML⁻²T⁻¹I⁰] (b) [M⁰L⁰T³I⁰] (c) [M⁻¹L⁻²T⁶I²] (d) [M⁰L⁰T²I⁰]

Solution. (b). [C²LR] = [C²L(R)] = [(LC)² (R/L)]. The frequency of an LC circuit is f = 1/(2π√(LC)), i.e. the dimension of LC is equal to [T²]. L/R gives the time constant of an L–R circuit, so the dimension of L/R is [T], and hence that of R/L is [T−1]. Substituting, [(LC)²(R/L)] = [T2]2[T−1] = [T3].

Teacher's Note: LC ~ T² and L/R ~ T; rewrite C²LR as (LC)²(R/L).

Exam Note: Use known time-like combinations instead of base units.

Question 11. A force F is given by F = at + bt², where t is time. What are the dimensions of a and b? (a) MLT⁻³ and ML²T⁻⁴ (b) MLT⁻³ and MLT⁻⁴ (c) MLT⁻¹ and MLT⁰ (d) MLT⁻⁴ and MLT¹

Solution. (b). From the principle of dimensional homogeneity [F] = [at], so [a] = [F/t] = [MLT−2/T] = [MLT−3]. Similarly [F] = [bt²], so [b] = [F/t²] = [MLT−2/T2] = [MLT−4].

Teacher's Note: Each term at and bt² must have the dimensions of force.

Exam Note: Divide F by t and t² separately.

Question 12. The position of a particle at time t is given by the relation x(t) = (v0/α)(1 − e−αt), where v0 is a constant and α > 0. The dimensions of v0 and α are respectively (a) M⁰L¹T⁻¹ and T⁻¹ (b) M⁰L¹T⁰ and T⁻¹ (c) M⁰L¹T⁻¹ and LT⁻² (d) M⁰L¹T⁻¹ and T

Solution. (a). From the principle of dimensional homogeneity, αt is dimensionless, so [α] = [1/t] = [T−1]. Similarly [x] = [v0]/[α], so [v0] = [x][α] = [L][T−1] = [LT−1].

Teacher's Note: An exponent must be dimensionless, which fixes α as 1/time.

Exam Note: Exponent argument is dimensionless: first step.

Question 13. The dimensions of physical quantity X in the equation Force = X/Density is given by (a) M¹L⁴T⁻² (b) M²L⁻²T⁻¹ (c) M²L⁻²T⁻² (d) M¹L⁻²T⁻¹

Solution. (c). [X] = [Force] × [Density] = [MLT−2] × [ML−3] = [M2L−2T−2].

Teacher's Note: X = force × density; multiply the exponents, do not divide.

Exam Note: Rearrange first, then substitute dimensions.

Question 14. Number of particles is given by n = −D(n2 − n1)/(x2 − x1) crossing a unit area perpendicular to X-axis in unit time, where n1 and n2 are number of particles per unit volume for the value of x meant to x2 and x1. Find dimensions of D called as diffusion constant. (a) M⁰LT² (b) M⁰L²T⁻⁴ (c) M⁰LT⁻³ (d) M⁰L²T⁻¹

Solution. (d). (n) = number of particles passing through unit area in unit time = [M0L0T0]/([L2][T]) = [L−2T−1]. [n1] = [n2] = number of particles in unit volume = [L−3]. Now from the given formula [D] = [n][x2 − x1]/[n2 − n1] = [L−2T−1][L]/[L−3] = [L2T−1].

Teacher's Note: n is a flux (per area per time); concentration is per volume.

Exam Note: Identify n as flux versus n₁, n₂ as concentrations.

Question 15. E, m, l and G denote energy, mass, angular momentum and gravitational constant respectively, then the dimension of El²/(m⁵G²) are (a) Angle (b) Length (c) Mass (d) Time

Solution. (a). [E] = [ML2T−2], [m] = [M], [l] = [ML2T−1], [G] = [M−1L3T−2]. Now El²/(m5G²) = [ML2T−2] × [ML2T−1]2 / ([M5] × [M−1L3T−2]2) = [M0L0T0], i.e. the quantity should be angle.

Teacher's Note: Dimensionless means an angle (or pure number) among the options.

Exam Note: Square l and G before combining exponents.

Question 16. The equation of a wave is given by Y = A sin ω(x/v − k) where ω is the angular velocity and v is the linear velocity. The dimension of k is (a) LT (b) T (c) T⁻¹ (d) T²

Solution. (b). According to the principle of dimensional homogeneity [k] = [x/v] = [L]/[LT−1] = [T].

Teacher's Note: The bracket is dimensionless (ω × time), so k has dimensions of time.

Exam Note: k must match x/v, a time.

Question 17. The potential energy of a particle varies with distance x from a fixed origin as U = A√x/(x² + B), where A and B are dimensional constants then dimensional formula for AB is (a) ML⁷ᐟ²T⁻² (b) ML¹¹ᐟ²T⁻² (c) M²L⁹ᐟ²T⁻² (d) ML¹³ᐟ²T⁻³

Solution. (b). From dimensional homogeneity [x2] = [B], so [B] = [L2]. As well as [U] = [A][x1/2]/([x2] + [B]), so [ML2T−2] = [A][L1/2]/[L2], hence [A] = [ML7/2T−2]. Now [AB] = [ML7/2T−2] × [L2] = [ML11/2T−2].

Teacher's Note: Terms added in x² + B share dimensions, so B = L²; then find A from U.

Exam Note: Use the sum x² + B to fix B.

Question 18. The dimensions of (1/2)ε0E² (ε0 = permittivity of free space; E = electric field) is (a) MLT⁻¹ (b) ML²T⁻² (c) ML⁻¹T⁻² (d) ML²T⁻¹

Solution. (c). Energy density = (1/2)ε0E² = Energy/Volume = [ML2T−2/L3] = [ML−1T−2].

Teacher's Note: (1/2)ε₀E² is the electric energy stored per unit volume.

Exam Note: Energy per volume: ML⁻¹T⁻², same as pressure.

Question 19. You may not know integration. But using dimensional analysis you can check on some results. In the integral ∫dx/(2ax − x²)1/2 = an sin−1(x/a − 1) the value of n is (a) 1 (b) −1 (c) 0 (d) 1/2

Solution. (c). Let x = length, so [x] = [L] and [dx] = [L]. By the principle of dimensional homogeneity x/a is dimensionless, so [a] = [x] = [L]. The left side has dimension [L]/[L2]1/2 = [L0] (taking [ax] = [x2] = [L2]), and the right side is [Ln] (the inverse sine is dimensionless). Hence n = 0.

Teacher's Note: Argument of sin⁻¹ is dimensionless; compare dimensions on both sides.

Exam Note: Left side dimensionless, so a must have power 0.

Question 20. A physical quantity P = B²l²/m where B = magnetic induction, l = length and m = mass. The dimension of P is (a) MLT⁻³ (b) ML²T⁻⁴I⁻² (c) M²L²T⁻⁴I (d) MLT⁻²I⁻²

Solution. (b). F = BIL, so dimension of [B] = [F]/([I][L]) = [MLT−2]/([I][L]) = [MT−2I−1]. Now dimension of [P] = [B2l2]/[m] = [MT−2I−1]2 × [L2]/[M] = [ML2T−4I−2].

Teacher's Note: Get [B] from F = BIL, then square it.

Exam Note: Squaring B squares the current exponent too.

Question 21. The equation of the stationary wave is y = 2a sin(2πct/λ) cos(2πx/λ), which of the following statements is wrong? (a) The unit of ct is same as that of λ (b) The unit of x is same as that of λ (c) The unit of 2πc/λ is same as that of 2πx/λt (d) The unit of c/λ is same as that of x/λ

Solution. (d). Here 2πct/λ as well as 2πx/λ are dimensionless (angle), i.e. [2πct/λ] = [2πx/λ] = [M0L0T0]. So (a) unit of ct is same as that of λ, (b) unit of x is same as that of λ, (c) [2πc/λ] = [2πx/(λt)], and (d) x/λ is unitless. It is not the case with c/λ.

Teacher's Note: Arguments of sine and cosine are dimensionless, so ct and x are lengths.

Exam Note: c/λ has unit T⁻¹, but x/λ is dimensionless.

Sample problems based on conversion

Question 22. A physical quantity is measured and its value is found to be nu where n = numerical value and u = unit. Then which of the following relations is true (a) n ∝ u² (b) n ∝ u (c) n ∝ √u (d) n ∝ 1/u

Solution. (d). We know that P = nu = constant, so n1u1 = n2u2, or n ∝ 1/u.

Teacher's Note: A larger unit gives a smaller number for the same quantity.

Exam Note: State nu = constant to justify inverse proportion.

Question 23. In C.G.S. system the magnitude of the force is 100 dynes. In another system where the fundamental physical quantities are kilogram, metre and minute, the magnitude of the force is (a) 0.036 (b) 0.36 (c) 3.6 (d) 36

Solution. (c). n1 = 100, M1 = g, L1 = cm, T1 = sec and M2 = kg, L2 = metre, T2 = minute, x = 1, y = 1, z = −2. Using n2 = n1[M1/M2]x[L1/L2]y[T1/T2]z: n2 = 100[g/kg]1[cm/metre]1[sec/minute]−2 = 100[1/103][1/102][1/60]−2 = 3.6.

Teacher's Note: Force is MLT⁻²; convert each base unit, with T raised to −2.

Exam Note: (1/60)⁻² = 3600 is the usual slip point.

Question 24. The temperature of a body on Kelvin scale is found to be X K. When it is measured by a Fahrenheit thermometer, it is found to be X F. Then X is (a) 301.25 (b) 574.25 (c) 313 (d) 40

Solution. (b). Corrected: the book prints option (c) 313, which is wrong. Relation between centigrade and Fahrenheit: (K − 273)/5 = (F − 32)/9. According to the problem (X − 273)/5 = (X − 32)/9, so 9X − 2457 = 5X − 160, 4X = 2297 and X = 574.25. Check: (574.25 − 273)/5 = 60.25 = (574.25 − 32)/9.

Teacher's Note: Set K and F readings equal and solve the linear relation.

Exam Note: Show the cross-multiplication; 313 fails the check.

Question 25. Which relation is wrong (a) 1 Calorie = 4.18 Joules (b) 1 Å = 10⁻¹⁰ m (c) 1 MeV = 1.6 × 10⁻¹³ Joules (d) 1 Newton = 10⁻⁵ Dynes

Solution. (d). Because 1 Newton = 105 Dyne.

Teacher's Note: 1 N = 10⁵ g cm s⁻² = 10⁵ dyne.

Exam Note: Know N to dyne factor: 10⁵.

Question 26. To determine the Young's modulus of a wire, the formula is Y = (F/A)(L/ΔL), where L = length, A = area of cross-section of the wire, ΔL = change in length of the wire when stretched with a force F. The conversion factor to change it from CGS to MKS system is (a) 1 (b) 10 (c) 0.1 (d) 0.01

Solution. (c). We know that the dimension of Young's modulus is [ML−1T−2]. C.G.S. unit: gm cm−1 sec−2 and M.K.S. unit: kg m−1 sec−2. By using the conversion formula n2/n1 = [M1/M2]1[L1/L2]−1[T1/T2]−2 = [gm/kg]1[cm/meter]−1[sec/sec]−2 = [1/103][1/102]−1 = 1/10 = 0.1.

Teacher's Note: Y has the dimensions of pressure; convert g, cm to kg, m.

Exam Note: Factor 0.1: 1 Pa = 10 dyne/cm² (reverse trap).

Download Pradeep's KL Gogia Solutions for Class 11 Math PDF

Download Pradeep's KL Gogia Solutions for Class 11

Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Physics Chapter 19 Unit Dimensions And Measurement Part 1 tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Additional Study Materials for 2026

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Physics?

They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Physics. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.