Evergreen Solutions Class 9 Science Chapter 13 Sound

Download Class 9 Science Textbook Solutions: Chapter 13 Sound

Review structured textbook solutions for Class 9 Science Chapter 13 Sound prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Access Textbook Answers and Solutions

View or download the dedicated Chapter 13 Sound solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Science.

Periodic Test

Question 1. What is an echo?

Solution.

An echo is the sound produced by the reflection of sound waves from a surface and heard back by the listener.

Teacher's Note: Echo needs a distinct repetition after the original sound, heard separately from it.

Exam Note: Mention reflection and separate hearing.

Question 2. What is reverberation?

Solution.

The repeated reflection of sound that causes its persistence until it is reduced to an inaudible value is called reverberation.

Teacher's Note: Reverberation is overlapping echoes in a big hall; too much blurs speech.

Exam Note: Define with 'repeated reflection' and 'persistence'.

Question 3. What is SONAR?

Solution.

SONAR stands for Sound Navigation And Ranging. It is a device used to measure the distance, direction and speed of underwater objects using ultrasonic waves.

Teacher's Note: SONAR sends ultrasound and times the reflected echo to locate underwater objects and the sea depth.

Exam Note: Expand the full form SONAR.

Question 4. Sound is produced by a vibrating source. Why then a vibrating pendulum does not produce any sound?

Solution.

The audible range of a normal human being is 20 Hz to 20 kHz. A vibrating pendulum vibrates with a frequency much lower than 20 Hz (infrasonic range), so we are not able to hear it.

Teacher's Note: Pendulum frequency is a fraction of a hertz, far below the human audible limit of 20 Hz.

Exam Note: Link frequency below 20 Hz to inaudibility.

Question 5. What is the audible range for a normal human being?

Solution.

The audible range of a normal human being is 20 Hz to 20 kHz.

Teacher's Note: Below 20 Hz is infrasound, above 20 kHz is ultrasound; both are inaudible to humans.

Exam Note: Write both limits with units.

Question 6. Give Reasons for the Following: Why sound waves are called mechanical waves?

Solution.

The waves that require a medium to propagate are called mechanical waves. They require a medium to transport energy from one point to another. Sound waves travel through a medium by vibrations of its particles. They cannot travel in vacuum (without any medium). So, they are called mechanical waves.

Teacher's Note: Mechanical waves need particles to vibrate; vacuum has none, hence no sound in space.

Exam Note: Give the vacuum point as the key reason.

Question 7. Give Reasons for the Following: Why are ceilings of concert halls curved?

Solution.

The audience in a concert hall should hear the sound clearly. Thus, the ceilings of a concert hall are made curved. It is done so that the sound after reflection reaches every corner of the concert hall and the audience can listen to it clearly.

Teacher's Note: Curved ceilings and boards reflect sound evenly to all parts of the hall.

Exam Note: Say reflected sound reaches every corner.

Question 8. Give Reasons for the Following: Why sound wave is called a longitudinal wave?

Solution.

In a longitudinal wave, the individual particles of the medium move in a direction parallel to the direction of propagation of the disturbance. The particles oscillate back and forth about their position of rest. A sound wave propagates in the same way. So, it is called a longitudinal wave.

Teacher's Note: Particles vibrate along the wave direction forming compressions and rarefactions, unlike transverse waves.

Exam Note: State 'parallel to direction of propagation'.

Question 9. Give Reasons for the Following: Why echoes can't be heard in a small room?

Solution.

A sound persists in our ear for 0.1 s. At a temperature of 22°C in air the speed of sound is 344 m s-1, so the total distance covered by sound from the source to the reflecting surface and back should be at least 344 × 0.1 = 34.4 m. Thus the minimum distance between the source and the reflecting surface should be half of it, i.e. 17.2 m. In a small room the distance to the walls is less than 17.2 m, so the reflected sound reaches us within 0.1 s and merges with the original sound. Hence no echo is heard.

Teacher's Note: Reflected sound arriving within 0.1 s merges with the original, so it is not heard separately.

Exam Note: Quote 0.1 s and 17.2 m with calculation.

Question 10. Give Reasons for the Following: Why echoes in the long gallery and big halls can be heard?

Solution.

A sound persists in our ear for 0.1 s. At a temperature of 22°C in air the speed of sound is 344 m s-1, so the total distance covered by sound from the source to the reflecting surface and back should be at least 344 × 0.1 = 34.4 m. Thus the minimum distance between the source and the reflecting surface should be half of it, i.e. 17.2 m. In a long gallery and big halls the distance between the source and the reflecting surface is more than this minimum distance, so the echo reaches us after more than 0.1 s and is heard separately.

Teacher's Note: Longer distance delays the reflected sound beyond 0.1 s, so the ear hears it as a separate sound.

Exam Note: Same 17.2 m reasoning, opposite conclusion.

Question 11. Transverse waves and longitudinal waves.

Solution.

Transverse wave: In a transverse wave, particles oscillate up and down about their mean position in a direction perpendicular to the direction of propagation of the wave. e.g. light waves (also waves on a string).Longitudinal wave: In a longitudinal wave, the individual particles of the medium move in a direction parallel to the direction of propagation of the wave. The particles oscillate back and forth about their position of rest. e.g. sound waves.

Teacher's Note: Transverse: crests and troughs, perpendicular vibration. Longitudinal: compressions and rarefactions, parallel vibration.

Exam Note: Give definition plus one example each.

Question 12. Crest and trough.

Solution.

Crest: It is the highest point the medium rises to while the wave propagates.Trough: It is the lowest point the medium falls to while the wave propagates.

Teacher's Note: Crests and troughs exist only in transverse waves; compare with compression and rarefaction.

Exam Note: Mention highest and lowest points of the wave.

Question 13. Infrasonic vibrations and ultrasonic vibrations.

Solution.

Infrasonic vibrations: Their frequency is below 20 Hz.Ultrasonic vibrations: Their frequency is above 20 kHz.

Teacher's Note: Infrasound lies below human hearing (heard by elephants); ultrasound above (heard by bats, dogs).

Exam Note: Give frequency limits for both.

Question 14. Compression and rarefaction.

Solution.

Compressions: The particles are closest to each other in this region. The density and pressure of the medium are maximum at a compression.Rarefaction: The particles are farthest from each other. The density and pressure of the medium are minimum at a rarefaction.

Teacher's Note: Sound travels as alternate high-pressure and low-pressure regions in the medium.

Exam Note: State density and pressure for each.

Question 15. Loudness and intensity of sound.

Solution.

Loudness: It defines how loud a sound is to a listener. It depends on the amplitude of the wave and is measured in decibels (dB).Intensity: It is the amount of sound energy passing per second through unit area held perpendicular to the direction of propagation. Its SI unit is W m-2.

Teacher's Note: Intensity is physical (W m-2); loudness is the ear's response. Louder sounds have greater amplitude.

Exam Note: Distinguish physical measure from listener's sensation.

Question 16. With the help of a labelled diagram, explain the working of the human ear.

Solution.

PinnaAuditory nerveHammerAnvilStirrupOval windowCochleaTympanic membrane (eardrum)Auditory canalEustachian tubeOuter earMiddleearInnerear
Working of human ear:

The outer ear is called 'pinna'. It collects the sound from the surroundings. The auditory canal passes this sound to a thin membrane called the eardrum or tympanic membrane.

When a compression or rarefaction of the medium reaches the eardrum, it moves inward or outward. In this way, the eardrum vibrates. These vibrations are amplified several times by three bones - the hammer, anvil and stirrup - in the middle ear. The middle ear transmits the amplified pressure variations to the inner ear. The cochlea converts these variations into electrical signals in the inner ear. These signals are sent to the brain via the auditory nerve. The brain interprets them as sound.

Teacher's Note: Follow the path: pinna, canal, eardrum, three bones, cochlea, auditory nerve, brain. Diagram labels carry marks.

Exam Note: Label pinna, eardrum, ossicles, cochlea, auditory nerve.

Question 17. Illustrate with the help of an experiment that sound requires a medium to propagate.

Solution.

To electric connection CorkSwitchBell jarElectric bellTo vacuum pump
  • Take an electric bell and an airtight bell jar.
  • Suspend the bell inside the bell jar.
  • Connect a vacuum pump to the bell jar as shown in the figure.
  • Press the switch to hear the bell.
  • Now, start the vacuum pump.
  • When the air in the jar is pumped out gradually, the sound becomes fainter even though the same current is passing through the bell.
  • As the amount of air decreases inside the bell jar, the sound becomes fainter.
  • When there is no air inside the jar, there is no sound of the bell.

This shows that sound requires a medium to propagate.

Teacher's Note: Bell is still vibrating but sound fades as air is removed, proving a medium is needed.

Exam Note: Draw the jar, bell and pump; state the conclusion.

Question 18. A sound wave of wavelength 70 cm travels 840 m in 2.5 seconds. What is the velocity and frequency of sound?

Solution.

Given, distance travelled = 840 m, time taken = 2.5 s, wavelength = 70 cm = 0.7 m

velocity of wave = distance / time = 840 / 2.5 = 336 m s-1

frequency = velocity / wavelength = 336 / 0.7 = 480 Hz

Note: the printed question says 25 seconds but the solution (and the intended problem) uses 2.5 s; with 25 s the answers would be 33.6 m s-1 and 48 Hz.

Teacher's Note: Velocity is distance over time; then frequency = v/λ with wavelength converted to metres.

Exam Note: Convert 70 cm to m; units m s-1 and Hz.

Question 19. An echo is heard after 0.8 seconds, when a person fires a cracker 132.8 m from a high building. Calculate the speed of sound.

Solution.

Given, time for echo = 0.8 s, distance of building = 132.8 m

Distance travelled by sound = 2 × 132.8 = 265.6 m

speed of sound = distance / time = 265.6 / 0.8 = 332 m s-1

Teacher's Note: Sound goes to the building and back, so total distance is twice the separation.

Exam Note: Double the distance before dividing by time.

Question 20. A source of wave produces 40 crests and 40 troughs in 0.4 seconds. Find the frequency of the wave.

Solution.

Given, there are 40 crests and 40 troughs. One crest and one trough constitute one cycle. So, total number of cycles = 40.

Time period = total time / number of cycles = 0.4 / 40 = 0.01 s

frequency = 1 / time period = 1 / 0.01 = 100 Hz

Teacher's Note: One crest plus one trough is one complete wave, so 40 cycles in 0.4 s gives 100 per second.

Exam Note: Count cycles as pairs of crest and trough.

Question 21. Why an echo is not heard when distance between source of sound and reflecting body is 10 m?

Solution.

A sound persists in our ear for 0.1 s. At a temperature of 22°C in air the speed of sound is 344 m s-1, so the total distance covered by sound from the source to the reflecting surface and back should be at least 344 × 0.1 = 34.4 m. Thus the minimum distance between the source and the reflecting surface should be half of it, i.e. 17.2 m. With the reflecting body only 10 m away, the sound returns in 20/344 = 0.058 s, which is less than 0.1 s. So we cannot hear an echo.

Teacher's Note: Round trip of 20 m takes about 0.06 s, shorter than the ear's 0.1 s persistence.

Exam Note: Show time 0.058 s less than 0.1 s.

Question 22. The distance between the crest and trough of a transverse wave is 15 cm, what is the velocity of the wave if its frequency is 1000 Hz?

Solution.

As per the book, the distance between the crest and trough is taken as the wavelength: wavelength = 15 cm = 0.15 m.

frequency = 1000 Hz, velocity = wavelength × frequency = 0.15 × 1000 = 150 m s-1

Strictly, the distance between a crest and the adjacent trough is half a wavelength; then λ = 30 cm and v = 300 m s-1. The book answer is 150 m s-1.

Teacher's Note: Strictly, adjacent crest-to-trough is half a wavelength. The book treats 15 cm as wavelength, giving 150 m s-1.

Exam Note: Write v = fλ; use the book's value 150 m s-1.

Question 23. Two astronauts cannot hear each other on the moon. Why?

Solution.

Sound is a mechanical wave and requires a medium to propagate. As the moon has no atmosphere, there is no air. So, there is no medium for sound to propagate and two astronauts cannot hear each other on the moon.

Teacher's Note: No atmosphere on the Moon means no particles to carry vibrations; astronauts use radio, an electromagnetic wave.

Exam Note: Mention absence of air or medium.

Question 24. Sometimes our dog begins to bark without any reason. Can you explain why?

Solution.

Dogs can hear sounds which are beyond our audible range (ultrasonic sounds up to about 50 kHz). So, whenever they hear a sound which is inaudible to us, they bark in response to it.

Teacher's Note: Dogs hear higher frequencies than humans, so they react to sounds we cannot detect.

Exam Note: Say dogs hear ultrasound beyond 20 kHz.

Question 25. In which case is the speed of sound more; the humming of a bee or the roaring of a lion?

Solution.

The speed of sound does not depend on the amplitude or frequency of the sound. So, both the sounds - the humming of a bee and the roaring of a lion - travel at the same speed in the same medium, but differ in loudness (amplitude) and pitch.

Teacher's Note: Speed depends only on the medium and its temperature, not on the source or loudness.

Exam Note: Answer: equal speed in the same medium.

Question 26. When is the velocity of sound more; during winters or during summers?

Solution.

The speed of sound depends on the properties of the medium. It travels faster when the temperature is high as the particles vibrate more due to the heat energy provided to them. So, the velocity of sound is more in summer.

Teacher's Note: Speed of sound in air rises about 0.6 m s-1 per degree Celsius.

Exam Note: Say summer, because of higher temperature.

Question 27. Can elephants hear frequencies less than 20 Hz?

Solution.

Elephants are able to hear in the infrasound range. This range lies below 20 Hz. So, they are able to hear sound below 20 Hz.

Teacher's Note: Elephants communicate using infrasound that travels long distances; humans cannot hear it.

Exam Note: Yes; infrasonic range is below 20 Hz.

Comprehensive Exercises (MCQ)

Question 1. Which of the following are transferred from one place to another place by the waves?
A. mass
B. wavelength
C. velocity
D. energy

Solution.

Answer: D. energy

Energy is transferred from one place to another by the propagation of waves; the medium's particles only vibrate about their mean positions.

Teacher's Note: Waves carry energy, not matter.

Exam Note: Waves transfer energy, never mass.

Question 2. Sound waves are:
A. transverse
B. longitudinal
C. partly transverse and partly longitudinal
D. none of these

Solution.

Answer: B. longitudinal

In a longitudinal wave, the individual particles of the medium move in a direction parallel to the direction of propagation of the disturbance. Sound waves are longitudinal waves.

Teacher's Note: Sound shows compressions and rarefactions along the direction of travel.

Exam Note: Sound in air is always longitudinal.

Question 3. On a slinky we can produce:
A. transverse waves only
B. longitudinal waves only
C. both transverse and longitudinal waves
D. neither transverse nor longitudinal waves

Solution.

Answer: C. both transverse and longitudinal waves

A slinky produces transverse waves when one end is fixed and the other end is stretched and given a jerk at right angle to its length. It produces longitudinal waves when compressions are given at regular intervals of time at its free end.

Teacher's Note: Direction of the push decides the wave type on a slinky.

Exam Note: Both types are possible depending on the jerk.

Question 4. The distance between consecutive crests is:
A. one wavelength
B. half a wavelength
C. one-fourth wavelength
D. twice wavelength

Solution.

Answer: A. one wavelength

The distance between consecutive crests is called one wavelength.

Teacher's Note: Same for consecutive troughs, compressions or rarefactions.

Exam Note: Wavelength = distance between consecutive crests.

Question 5. Hertz is a unit of:
A. time period
B. wavelength
C. frequency
D. wave speed

Solution.

Answer: C. frequency

Hertz is a unit of frequency named after H. R. Hertz. 1 Hz = one oscillation per second.

Teacher's Note: 1 Hz is one cycle per second; time period is in seconds.

Exam Note: Hz is the SI unit of frequency.

Question 6. If the density of a medium through which sound is propagating is minimum, then this point is called:
A. rarefaction
B. crest
C. compression
D. trough

Solution.

Answer: A. rarefaction

A rarefaction during the propagation of a sound wave takes place when the density of the medium is minimum. A compression takes place when the density of the medium is maximum.

Teacher's Note: Crest and trough belong to transverse waves, so they are distractors here.

Exam Note: Minimum density means rarefaction.

Question 7. The audible range for a normal human being is:
A. 10 Hz to 20,000 Hz
B. 20 Hz to 20 kHz
C. 10 Hz to 50 kHz
D. 20 Hz to 1000 Hz

Solution.

Answer: B. 20 Hz to 20 kHz

The audible range for a normal human being is 20 Hz to 20 kHz.

Teacher's Note: Memorise both limits; bats, dogs and dolphins hear higher.

Exam Note: Audible range: 20 Hz to 20,000 Hz.

Question 8. Ultrasonic waves are not used in:
A. SONAR
B. sonography
C. CUSA
D. radio waves

Solution.

Answer: D. radio waves

Ultrasonic waves are used in SONAR, sonography and CUSA (ultrasonic surgical aspirator) but not in radio waves, which are electromagnetic waves, not sound. (The source option reads 'sibigraphy', read here as sonography.)

Teacher's Note: Radio waves are electromagnetic and are not ultrasound at all.

Exam Note: Ultrasound uses: SONAR, scanning, cleaning, surgery.

Question 9. A bomb explodes on the Moon, how long will the sound of explosion take to reach the Earth?
A. 10 s
B. 1000 s
C. 1 day
D. none of these

Solution.

Answer: D. none of these

As the moon has no atmosphere, there is no air. Sound cannot travel without a medium because it is a mechanical wave. So, it will never reach the Earth due to the vacuum between the Earth and the Moon in space.

Teacher's Note: Space between Earth and Moon is vacuum, so no sound arrives at all.

Exam Note: Answer 'never' means 'none of these'.

Question 10. The walls of a hall built for musical concert should:
A. amplify sound
B. reflect sound
C. transmit sound
D. absorb sound

Solution.

Answer: D. absorb sound

The walls of a hall built for a musical concert should be able to absorb sound and reduce reverberation.

Teacher's Note: Absorbing materials stop excess reflection that causes reverberation.

Exam Note: Absorb sound to reduce reverberation.

Question 11. In an orchestra, the musical sounds of different instruments are distinguished from one another by the characteristic of:
A. loudness
B. pitch
C. quality or timbre
D. all the three

Solution.

Answer: C. quality or timbre

Quality or timbre is the property of sound which distinguishes it from other sounds of the same pitch and loudness.

Teacher's Note: Same note on guitar and flute differs in waveform, i.e. timbre.

Exam Note: Timbre distinguishes instruments.

Question 12. The bells of a temple are made of large size. It is for:
A. producing sound of high pitch
B. producing loud sound
C. producing sound of high quality
D. enhancing the beauty

Solution.

Answer: B. producing loud sound

A larger bell vibrates with larger amplitude and low frequency, so it gives a louder sound that travels a longer distance.

Teacher's Note: Bigger vibrating surface gives larger amplitude, so more loudness.

Exam Note: Large size gives loud sound, low pitch.

Question 13. An astronaut cannot hear his companion on the surface of the Moon because:
A. frequencies produced are above the audio frequencies
B. there is no medium for sound propagation
C. temperature is too low during night and high during day
D. there are too many craters on the surface of the Moon

Solution.

Answer: B. there is no medium for sound propagation

As the moon has no atmosphere, there is no air. Sound cannot travel without a medium because it is a mechanical wave. So, an astronaut cannot hear his companion on the surface of the Moon.

Teacher's Note: Moon lacks atmosphere, so no particles carry sound between astronauts.

Exam Note: No medium on the Moon is the reason.

Question 14. The loudness of a sound depends upon:
A. amplitude
B. pitch
C. velocity
D. wavelength

Solution.

Answer: A. amplitude

The loudness of a sound is directly proportional to the square of its amplitude, so a larger amplitude gives a louder sound.

Teacher's Note: Pitch depends on frequency; loudness depends on amplitude.

Exam Note: Loudness depends on amplitude.

Question 15. In the bell jar experiment, as air is removed from the jar:
A. intensity of sound falls
B. speed of sound falls
C. intensity of sound increases
D. speed of sound increases

Solution.

Answer: A. intensity of sound falls

Sound requires a medium to propagate. So it fades as the air is removed from the jar and its intensity decreases.

Teacher's Note: Less air means fewer particles to carry vibrations; intensity falls, not speed.

Exam Note: Intensity falls as air is pumped out.

Comprehensive Exercises (T/F)

Question 1. Write true or false for the following statements: Sound waves are transverse whereas light waves are longitudinal in nature.

Solution.

Answer: False

Sound waves are longitudinal waves. They propagate when the particles of the medium oscillate back and forth about their position of rest. Light waves are transverse waves, and they do not need a medium.

Teacher's Note: Statement has the two types swapped. Sound longitudinal, light transverse.

Exam Note: Correct the swap while explaining.

Question 2. Write true or false for the following statements: Distance between a crest and the next trough in a wave motion is λ/4.

Solution.

Answer: False

The distance between a crest and the next trough in a wave motion is λ/2. (The source gives 3λ/2, which is incorrect; the statement is false either way.)

Teacher's Note: Crest to next crest is λ; so crest to next trough is half of it.

Exam Note: Crest to trough = λ/2.

Question 3. Write true or false for the following statements: The audible range of frequencies is 20 Hz-20 kHz.

Solution.

Answer: True

Human ears can detect frequencies of 20 Hz to 20 kHz only.

Teacher's Note: Standard range for a normal young person.

Exam Note: True; write both limits.

Question 4. Write true or false for the following statements: The frequency of a sounding body of time period 0.01 sec is 100 Hz.

Solution.

Answer: True

Given, time period T = 0.01 s. Frequency f = 1/T = 1/0.01 = 100 Hz.

Teacher's Note: Frequency and time period are reciprocals.

Exam Note: Use f = 1/T.

Question 5. Write true or false for the following statements: The minimum distance between a source and the reflector of sound should be 34 m.

Solution.

Answer: False

A sound persists in our ear for 0.1 s. At a temperature of 22°C in air the speed of sound is 344 m s-1, so the total distance covered by sound from the source to the reflecting surface and back should be at least 344 × 0.1 = 34.4 m. Thus the minimum distance between the source and the reflecting surface should be half of it, i.e. 17.2 m.

Teacher's Note: Minimum distance is half of 34.4 m, as sound travels to the reflector and back.

Exam Note: Minimum distance is 17.2 m.

Question 6. Write true or false for the following statements: Sound waves travel faster in air than in water.

Solution.

Answer: False

The speed of sound decreases as we go from solid to liquid to gaseous state. Thus, sound travels faster in water than in air.

Teacher's Note: Speed order: solid > liquid > gas, since particles are closer in denser media.

Exam Note: Water faster than air.

Question 7. Write true or false for the following statements: Sound travels faster at a higher temperature than at a lower temperature.

Solution.

Answer: True

The speed of sound depends on the properties of the medium. It travels faster at a higher temperature than at a lower temperature.

Teacher's Note: Particles move faster when hot, so disturbance passes quicker.

Exam Note: Speed increases with temperature.

Question 8. Write true or false for the following statements: Sound and light travel in a medium in the form of crests and troughs and rarefactions and compressions respectively.

Solution.

Answer: False

The statement has them reversed. Sound travels in a medium in the form of compressions and rarefactions (longitudinal wave), while light travels as a transverse wave in the form of crests and troughs.

Teacher's Note: Sound: compressions and rarefactions. Light: crests and troughs. The statement swaps the order.

Exam Note: Spot the reversed order.

Question 9. Write true or false for the following statements: Light waves require no medium for their propagation.

Solution.

Answer: True

Light is not a mechanical wave. It can travel without any medium, which is why we see the Sun through space.

Teacher's Note: Light is electromagnetic, so it crosses vacuum; sound cannot.

Exam Note: True; contrast with sound.

Question 10. Write true or false for the following statements: Sound produced by a sounding body of frequency 300 Hz covers 34 m in the time the sounding body produces 30 vibrations.

Solution.

Answer: True

Given, frequency f = 300 Hz, number of vibrations = 30, distance = 34 m. Time period T = 1/f = 1/300 s. Total time for 30 vibrations = 30 × 1/300 = 0.1 s. Distance = speed × time = 340 × 0.1 = 34 m (taking the speed of sound in air as 340 m s-1).

Teacher's Note: Time for 30 vibrations is 0.1 s; sound at about 340 m s-1 then covers 34 m.

Exam Note: Find time first, then distance = speed × time.

Question 11. Write true or false for the following statements: Velocity of sound in air is more for higher frequency than for lower frequency.

Solution.

Answer: False

In a given medium, the speed of sound is almost the same for all frequencies. From v = λ × f, when frequency increases the wavelength decreases so that the speed remains the same.

Teacher's Note: Speed is set by the medium; frequency and wavelength adjust inversely.

Exam Note: Speed is independent of frequency.

Question 12. Write true or false for the following statements: The wavelength of 5 MHz ultrasound in a medium where the velocity is 1540 m s-1 is 0.3 mm.

Solution.

Answer: True

Given, frequency f = 5 MHz = 5 × 106 Hz, velocity v = 1540 m s-1. Wavelength λ = v/f = 1540 / (5 × 106) = 3.08 × 10-4 m = 0.308 mm ≈ 0.3 mm. (The source solution wrote 0.03 mm and answered False; the calculation gives 0.3 mm, so the statement is True.)

Teacher's Note: Convert MHz to Hz; 1540/5,000,000 = 3.08 × 10-4 m, which is about 0.3 mm.

Exam Note: Convert MHz and metres to mm carefully.

Class 9 Mathematics: Evergreen Solutions for Evergreen Solutions Class 9 Science Chapter 13 Sound

Complete Math Solutions for Evergreen Solutions Class 9 Science Chapter 13 Sound

Access the complete chapter-wise PDF for Evergreen Solutions Class 9 Science Chapter 13 Sound. These structured Evergreen Solutions solutions for Class 9 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Concept-Driven Math Answers

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Complete Your Class 9 Exam Preparation

In addition to these Evergreen Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 9 Science?

They are chapter-wise solved questions from the book for Class 9 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 9 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 9 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 9 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 9 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.