Step-by-Step Solutions for Class 9 Science Chapter 12 Work Power And Energy
Access comprehensive textbook solutions for Chapter 12 Work Power And Energy using the reference material for Class 9 Science. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Download Chapter 12 Work Power And Energy Textbook Solutions PDF
Navigate directly to the solved Science textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Periodic Test
Question 1. Define work.
Solution.
Work is defined when a force produces motion. For doing work, energy is required. For example, a horse pulling a cart is doing work.
Work done (W) in moving an object is equal to the product of force (F) and the displacement (s) of the body in the direction of force. SI unit of work is joule.
Work done = F × s
Teacher's Note: State both force and displacement along the force; mention joule.
Exam Note: Definition, formula W = F × s and unit: 2 marks.
Question 2. Define energy.
Solution.
The capability to do work is called energy. A person who can do a lot of work is said to possess a lot of energy. SI unit of energy is joule.
For example, when a raised hammer falls on a nail placed on wood, it drives the nail into the wood, i.e. it did some work because it possessed some kind of energy.
Teacher's Note: Energy is stored ability to do work; work is the transfer. Units are the same.
Exam Note: Write definition plus SI unit joule for full marks.
Question 3. Define power.
Solution.
Power is defined as the rate of doing work. For example, an old man takes 2 hours to do a work but a young man takes only 1 hour to do the same work; it means the rate of doing work by the young man is more than that of the old man. So the young man has more power than the old man.
Teacher's Note: Same work in less time means more power; time is the deciding factor.
Exam Note: Give P = W/t and unit watt along with definition.
Question 4. What is kinetic energy?
Solution.
Energy of a body due to its motion is called kinetic energy. For example, a running motorcycle has kinetic energy, a falling stone also possesses kinetic energy, but when the motion stops, kinetic energy is lost.
Kinetic energy (KE) of a body of mass m moving with velocity or speed v is given by the formula:
KE = ½ m v2
Teacher's Note: Kinetic energy depends on mass and the square of speed; it is never negative.
Exam Note: Definition, formula and one example: 2 marks.
Question 5. What is potential energy?
Solution.
Energy of a body due to its higher position above the earth or due to change in the shape of the body is called potential energy. For example, a brick lying on the roof of a house possesses potential energy. A stretched rubber band is another example of potential energy.
For a body of mass m raised to height h above the earth,
Potential energy = m × g × h
Teacher's Note: Position or shape change stores potential energy; height is measured from a chosen reference level.
Exam Note: Quote PE = mgh and give two examples.
Question 6. Give reason for the following: The potential energy of a freely falling object decreases progressively. Does this violate the law of conservation of energy? Why?
Solution.
According to the law of conservation of energy, energy can neither be created nor be destroyed. It can only be transformed from one form to another. Total energy before and after transformation remains the same.
So, if the potential energy of a freely falling object decreases progressively, then it is transformed into an equal amount of kinetic energy and the sum of both energies remains constant all the time.
Teacher's Note: Lost potential energy reappears as kinetic energy; the total stays constant.
Exam Note: Answer 'No' first, then justify with PE + KE = constant.
Question 7. Give reason for the following: Pardeep says that the acceleration in an object could be zero even when several forces are acting on it. Do you agree with him? Why?
Solution.
Yes, I agree with Pardeep. According to Newton's law of motion for a body:
Net force = mass × acceleration
So, acceleration = Net force / Mass
Every object on the Earth possesses some mass. So, if the resultant or net force due to several forces acting on the object is zero, then the acceleration of the body will be zero by the above-mentioned formula.
Teacher's Note: Acceleration depends on the net force, not on the number of forces.
Exam Note: Say 'agree' and write a = F(net)/m with net force zero.
Question 8. Give reason for the following: Why a coolie does not work, when he moves on a level road while carrying a box on his head?
Solution.
Work done when force is applied at an angle to motion is given by:
W = F × s cos θ
where F = force, s = displacement, θ = angle between direction of force and direction of motion.
Work done by a coolie in carrying a load on his head is ZERO with respect to gravity. This is because the coolie applies a force against the force of gravity, which acts in the vertical downward direction, and displacement of the load takes place in the horizontal direction, hence the angle between displacement and force becomes 90°.
cos 90° = 0, which means work done = 0.
So, a coolie does not work when he moves on a level road while carrying a box on his head.
Teacher's Note: Supporting force is vertical, motion horizontal, so angle is 90° and W = 0.
Exam Note: Mention θ = 90° and cos 90° = 0 explicitly.
Question 9. Give reason for the following: Can a body have momentum without having energy? Explain.
Solution.
Momentum = mass × velocity
A body can possess velocity only if it has kinetic energy; if it does not have that energy, then velocity = 0. Using this value in the above formula:
Momentum = mass × 0 = 0
So, a body cannot have momentum without having energy.
Sometimes even if a body has energy, its momentum can be zero. For example, a brick lying on the roof of a building possesses potential energy but no velocity, so momentum will be zero.
Teacher's Note: Moving body has both momentum and KE; a resting body may still have potential energy.
Exam Note: Link momentum to velocity, then to kinetic energy.
Question 10. Give reason for the following: Can there be displacement of an object in the absence of any force acting on it?
Solution.
Yes, there can be displacement of an object even if there is no force acting on it.
Force = mass × acceleration
Acceleration = Change in velocity / Time; Velocity = Displacement / Time
If a body possesses constant velocity, then it will have some displacement but there is no change in velocity, so the acceleration of the body will be zero. If there is no acceleration, then there will be no force acting on the body.
Teacher's Note: Uniform motion needs no net force (Newton's first law); displacement still grows.
Exam Note: Cite constant velocity and zero acceleration.
Question 11. Differentiate between work and energy.
Solution.
| WORK | ENERGY |
|---|---|
| Work is said to be done when a force produces motion. | The capability to do work is called energy. |
| Work cannot be transformed from one form to another. | Energy can be transformed from one form to another. |
| If an object does not move on applying force, no work is said to be done. | If an object does not move on applying force, even then energy of the body is consumed. |
| There is only one type of work, which can be positive, negative or zero. | Energy can be of many types like potential energy, kinetic energy, heat energy, chemical energy etc. |
| Work done = force × displacement | Potential energy = m × g × h |
| By the work-energy theorem: work done = change in kinetic energy | Kinetic energy = ½ m v2 |
Teacher's Note: Work is a process of transfer; energy is the stored capacity. Both are in joules.
Exam Note: Table with at least three clear points scores full marks.
Question 12. Differentiate between potential energy and kinetic energy.
Solution.
| POTENTIAL ENERGY | KINETIC ENERGY |
|---|---|
| Energy of a body due to its higher position above the earth or due to change in the shape of the body is called potential energy. | The energy of a body due to its motion or velocity is called kinetic energy. |
| Potential energy = m × g × h | Kinetic energy = ½ m v2 |
| For example, a brick lying on the roof of a house at a height possesses potential energy. | For example, a running motorcycle has kinetic energy. |
Teacher's Note: PE depends on position or shape; KE on speed. Falling bodies convert one into the other.
Exam Note: Give definition, formula and example for each.
Question 13. Differentiate between power and horsepower.
Solution.
| POWER | HORSEPOWER |
|---|---|
| Power is defined as the work done per unit time or rate at which energy is consumed. | Horsepower is a unit of measurement of power used to express power of engines or cars. |
| Power = work/time. SI unit of power is watt. | Horsepower is itself a bigger unit of power. |
| 1 watt = 1 joule/second | 1 horsepower = 746 watt |
Teacher's Note: Power is a quantity; horsepower is just one unit of it, equal to 746 W.
Exam Note: Remember 1 hp = 746 W; it is often asked.
Question 14. Differentiate between energy and power.
Solution.
| ENERGY | POWER |
|---|---|
| The capability to do work is called energy. | Power is defined as the work done per unit time or rate at which energy is consumed. |
| SI unit of energy is joule. 1 joule = 1 newton × 1 metre | SI unit of power is watt. 1 watt = 1 joule/second |
| Energy can change from one form to another. | Power cannot be changed from one form to another. |
| Energy can be stored. | Power cannot be stored. |
Teacher's Note: Energy is an amount; power is how fast it is used. Time is the link.
Exam Note: State units: joule versus watt (J/s).
Question 15. Differentiate between work and power.
Solution.
| WORK | POWER |
|---|---|
| Work is said to be done when a force produces motion. | Power is defined as the work done per unit time or rate at which energy is consumed. |
| SI unit of work is joule. | SI unit of power is watt. |
| Work done = force × displacement | Power = work/time |
| Work done is independent of time taken. | Power of an object or body depends on the time taken. |
Teacher's Note: Same work done slowly or quickly is equal work but different power.
Exam Note: Highlight time dependence: work has none, power does.
Question 16. Illustrate the law of conservation of energy by discussing the free fall of a body.
Solution.
According to the law of conservation of energy, energy can neither be created nor be destroyed. It can only be transformed from one form to another. Whenever energy changes from one form to another, the total amount of energy remains constant. The law of conservation of energy is valid in all situations and for all kinds of energy transformations.
For example, when a body is at some height from the earth it possesses only potential energy; as the body falls downwards its potential energy goes on decreasing but kinetic energy goes on increasing. Just before hitting the ground, the entire potential energy is transformed into kinetic energy and it possesses only kinetic energy.
Total energy = kinetic energy + potential energy
At maximum height, kinetic energy = 0, so total energy = potential energy.
On hitting the ground, potential energy = 0, so total energy = kinetic energy.
Teacher's Note: Track PE + KE at top, midway and bottom; the sum stays equal to mgh.
Exam Note: Show three positions with PE, KE values to earn full marks.
Question 17. Justify by giving proper reasoning whether the work done in the following cases is positive or negative: (i) Work done by friction on a body sliding down an inclined plane. (ii) Work done by a man in lifting a bucket from a well.
Solution.
(i) When the body slides down an inclined plane, the frictional force acts up along the incline, opposite to the motion, so the angle between the motion of the body and the frictional force is 180°.
Work = F s cos θ, with θ = 180°. So work done = F × s × cos 180° = −F × s (cos 180° = −1).
Work done by friction on a body sliding down an inclined plane is negative.
(ii) The man does work against the gravitational force, by applying force in the upward direction to lift the bucket. Since the direction of the applied force and the direction of motion of the bucket are the same, work done is positive.
Work = F s cos θ, with θ = 0°, cos 0° = 1. So work done = F × s.
Teacher's Note: Compare the direction of force with direction of displacement: opposite gives negative work.
Exam Note: State the angle and sign of cos.
Question 18. A man weighing 70 kg carries a weight of 10 kg to the top of a tower 100 m high. Calculate the work done.
Solution.
Given: mass of man = 70 kg, weight carried = 10 kg, height h = 100 m. Work done = ?
Total mass raised to the top of the tower: M = 70 + 10 = 80 kg
Work done = potential energy stored = M × g × h. Let g = 10 m s−2.
Work done = 80 × 10 × 100 = 80,000 J = 80 kJ
Teacher's Note: Both the man and the load are lifted, so add the masses before using mgh.
Exam Note: Add masses; W = mgh; answer 78,400 J.
Question 19. A block of mass 5 kg is lying on a frictionless table. A force of 20 N is applied on it for 10 seconds. Calculate its kinetic energy.
Solution.
Given: m = 5 kg, F = 20 N, t = 10 s, initial velocity u = 0. To find: kinetic energy.
Acceleration a = F/m = 20 N / 5 kg = 4 m s−2
a = (v − u)/t, so v = u + at = 0 + 4 × 10 = 40 m s−1
Kinetic energy = ½ m v2 = ½ × 5 × 402 = 4000 J = 4 kJ
Teacher's Note: Find a from F = ma, then v = at, then KE; frictionless table means all work becomes KE.
Exam Note: Three steps shown with units: a, v, KE = 4000 J.
Question 20. A man of mass 60 kg runs up a flight of 30 steps in 40 seconds. If each step is 20 cm high, calculate the power of the man.
Solution.
Given: m = 60 kg, number of steps = 30, height of each step = 20 cm, time taken = 40 s.
Total height h = 20 × 30 = 600 cm = 6 m
Work done = potential energy gained = m g h. Let g = 10 m s−2.
Work done = 60 × 10 × 6 = 3600 J
Power = Work / time = 3600 / 40 = 90 W
(Correction: the book solution wrongly multiplied the time by 30 to get 1200 s and gave 3 W. The 40 s is the total time for all 30 steps, so the power is 90 W.)
Teacher's Note: Time of 40 s is for the whole climb; do not multiply it by the steps.
Exam Note: Convert cm to m first; power = 3600/40 = 90 W.
Question 21. A girl of mass 40 kg climbs a rope 6 m long at constant speed in 15 seconds. What power does she expend during the climb?
Solution.
Given: m = 40 kg, h = 6 m, time = 15 s. Let g = 10 m s−2.
Potential energy gained = m g h = 40 × 10 × 6 = 2400 J
Power = Work / time = 2400 / 15 = 160 J/s = 160 W
So the power expended by the girl is 160 watts.
(Correction: the book solution concluded 600 W at the end, which does not match its own calculation of 160 W.)
Teacher's Note: Constant speed means work done equals gain in potential energy.
Exam Note: Final answer 160 W with unit; check division 2400 ÷ 15.
Question 22. Calculate the kinetic energy of a body of mass 50 kg moving with a velocity of 50 cm s−1.
Solution.
Given: m = 50 kg, velocity = 50 cm s−1. Since 1 cm = 0.01 m, v = 50 × 0.01 = 0.5 m s−1.
Kinetic energy = ½ m v2 = ½ × 50 × (0.5)2 = ½ × 12.5 = 6.25 J
(Correction: the book solution rounded 6.25 J to 6 J.)
Teacher's Note: Convert cm s-1 to m s-1 before squaring the speed.
Exam Note: Unit conversion earns a mark; answer 6.25 J.
Question 23. Does a stationary body possess kinetic energy?
Solution.
Kinetic energy of a body is due to its motion or velocity. If the body is stationary, then velocity = 0.
Kinetic energy = ½ m v2. Substituting v = 0, we get kinetic energy = 0.
So, a stationary body does not possess kinetic energy.
Teacher's Note: Zero speed gives zero KE, though the body may still have potential energy.
Exam Note: Substitute v = 0 in ½mv2 to justify the answer.
Question 24. When do you apply more power - when you lift a pen or when you lift a book?
Solution.
Power = Work done / time
A book has more mass than a pen, so more work (energy) is required when a book is lifted than when a pen is lifted. Since power is directly proportional to work done (for the same time), more power is applied in lifting a book.
Teacher's Note: Compare work done for the same height and time; heavier object needs more.
Exam Note: Mention equal time assumption and P = W/t.
Question 25. Is any work done by a body moving along a circular path?
Solution.
To keep a body moving in a circular path, a force called centripetal force acts towards the centre of the path. This force acts along the radius and at right angle to the direction of motion of the body.
So, work done in going around the circular path is zero because the displacement of the body is perpendicular to the direction of the centripetal force and, by the formula, work = F s cos θ where θ = 90° and cos 90° = 0.
So, work done = zero.
Teacher's Note: Centripetal force is always perpendicular to velocity, so it does no work.
Exam Note: Use W = Fs cos 90° = 0 as the key step.
Question 26. A person rowing a boat upstream is at rest with respect to the shore. Is he doing work?
Solution.
Yes, the person is doing work against the river current, but there is no work done with respect to the shore because no displacement is taking place with respect to the shore.
Teacher's Note: Work depends on the reference frame: zero displacement relative to shore means zero work there.
Exam Note: Mention both viewpoints: current and shore.
Question 27. You pay a coolie for carrying your luggage. Does he really do any work?
Solution.
Work done by a coolie in carrying a load on his head is ZERO. This is because the force of gravity acts in the vertical downward direction and displacement of the load takes place in the horizontal direction, hence the angle between displacement and force becomes 90°.
Since work = F s cos θ, work done in this case is zero because cos 90° = 0.
Note: Even if there is no work done in the scientific sense, the energy of the coolie is still consumed in carrying the luggage.
Teacher's Note: Muscles tire, but scientific work needs displacement along the force.
Exam Note: Distinguish everyday 'work' from work in physics.
Comprehensive Exercises (MCQ)
Question 1. When a coil spring is compressed, the work is done on the spring. The elastic potential energy:
A. increases
B. decreases
C. disappears
D. remains unchanged
Solution.
Answer: A. increases
Work done on a spring is W = ½ k x2, where k is the spring constant (stiffness) and x is the extension or compression produced.
This work done is stored in the spring as elastic potential energy, so the elastic potential energy increases when the spring is compressed.
(Correction: the book solution said it decreases, which contradicts its own reasoning; the correct option is A.)
Teacher's Note: Work done on the spring is stored in it, so its energy grows.
Exam Note: Stored energy = ½kx2, grows with compression.
Question 2. Potential energy of a person is minimum when:
A. Person is standing
B. Person is sitting on a chair
C. Person is sitting on the ground
D. Person is lying on the ground
Solution.
Answer: D. Person is lying on the ground
Potential energy = m × g × h, where h is the height above the ground. If the person is lying on the ground, the height of the centre of the body above the ground is minimum, so the potential energy is also minimum.
Teacher's Note: PE = mgh; lying down lowers the centre of mass most.
Exam Note: Link minimum height to minimum mgh.
Question 3. No work is done when:
A. a nail is hammered into a wooden box
B. a box is pushed along a horizontal floor
C. there is no component of force parallel to the direction of motion
D. none of these
Solution.
Answer: C. there is no component of force parallel to the direction of motion
Work done when force is applied at an angle to the direction of motion is W = F s cos θ. When there is no component of force parallel to the direction of motion, the force in the direction of motion is zero, so work done is also zero.
Teacher's Note: Only the force component along displacement does work.
Exam Note: Think of W = Fs cos θ with θ = 90°.
Question 4. When the speed of a moving object is doubled, its:
A. acceleration is doubled
B. weight is doubled
C. kinetic energy is doubled
D. kinetic energy increases 4 times
Solution.
Answer: D. kinetic energy increases 4 times
KE1 = ½ m v12. If the speed is doubled, v2 = 2v1, so KE2 = ½ m (2v1)2 = 4 × (½ m v12) = 4 KE1.
Acceleration depends on the change in velocity and the net force, not on the speed itself, and weight is independent of the speed.
Teacher's Note: KE varies as the square of speed: double speed gives four times KE.
Exam Note: Remember KE ∝ v2; a quick MCQ favourite.
Question 5. When a stone of mass 'm' falls through a vertical height 'd', the decrease in the gravitational energy is:
A. mg/d
B. mg2/2
C. mgd
D. md/g
Solution.
Answer: C. mgd
The potential energy of a body of mass m at height d is m × g × d. This gravitational potential energy decreases as the stone falls, and when the stone has fallen the whole height, the potential energy lost = mgd.
Teacher's Note: Loss in PE equals mg times the height fallen.
Exam Note: Write PE = mgh with h = d.
Question 6. A 1 kg mass has a kinetic energy of 1 joule when its speed is:
A. 0.45 m s–1
B. 1 m s–1
C. 1.4 m s–1
D. 4.4 m s–1
Solution.
Answer: C. 1.4 m s–1
Given: m = 1 kg, KE = 1 J. KE = ½ m v2, so 1 = ½ × 1 × v2, v2 = 2, v = √2 = 1.4 m s−1.
Teacher's Note: Rearrange v = √(2KE/m); √2 is about 1.41.
Exam Note: Show substitution then root: v = 1.4 m/s.
Question 7. An iron sphere of mass 30 kg has the same diameter as an aluminium sphere whose mass is 10.5 kg. The spheres are dropped simultaneously from a cliff. When they are 10 m from the ground, they have the same:
A. acceleration
B. momentum
C. potential energy
D. kinetic energy
Solution.
Answer: A. acceleration
Kinetic energy (½mv2), potential energy (mgh) and momentum (mv) all depend on the mass of the body, so they cannot be the same for both spheres. But the acceleration due to gravity (g = 10 m s−2) is the same for all objects irrespective of their mass.
Teacher's Note: Free fall acceleration is independent of mass; the other quantities depend on mass.
Exam Note: Eliminate options containing m; g is common.
Question 8. An object of mass 1 kg has a potential energy of 1 joule relative to the ground when it is at a height of:
A. 0.102 m
B. 1 m
C. 9.8 m
D. 32 m
Solution.
Answer: A. 0.102 m
PE = m g h, so 1 = 1 × 9.8 × h and h = 1/9.8 = 0.102 m.
Teacher's Note: Use g = 9.8 m s-2 here, since options are based on it.
Exam Note: Divide PE by mg: h = 1/9.8 = 0.102 m.
Question 9. An object of mass 5 kg falls from a height of 5 m above the ground. The loss of potential energy of the mass is:
A. 250 J
B. 25 J
C. 2.5 kJ
D. 50 J
Solution.
Answer: A. 250 J
Loss of PE = m g h = 5 × 10 × 5 = 250 J.
Teacher's Note: Loss in PE equals mgh with g = 10 m s-2.
Exam Note: Multiply 5 × 10 × 5 and give joule.
Question 10. A weightlifter lifts 240 kg from the ground to a height of 2.5 m in 3 seconds. The average power is:
A. 1960 W
B. 19.6 kW
C. 1.96 MW
D. 196 W
Solution.
Answer: A. 1960 W
Energy consumed = m g h = 240 × 9.8 × 2.5 = 5880 J.
Power = Work / time = 5880 / 3 = 1960 W.
Teacher's Note: Compute work first, then divide by the 3 seconds.
Exam Note: Two steps: W = 5880 J, P = 1960 W.
Question 11. When a force retards the motion of a body, the work done is:
A. positive
B. zero
C. negative
D. uncertain
Solution.
Answer: C. negative
A force can retard the motion of an object only when it acts opposite to the direction of motion, so the angle between them is 180°. Work = F s cos 180° = −F s, which is negative.
Teacher's Note: Retarding force opposes displacement, so angle 180° gives negative work.
Exam Note: Cite cos 180° = −1.
Question 12. The work done by a force on a body will be positive if the:
A. body does not move
B. body moves perpendicular to the direction of motion
C. body moves along the direction of the applied force
D. body moves opposite to the direction of the applied force
Solution.
Answer: C. body moves along the direction of the applied force
Work done by a force is positive when the direction of the applied force and the direction of motion are the same. Then W = F s cos θ with θ = 0° gives a positive value.
Teacher's Note: Positive work needs displacement along the force.
Exam Note: Use θ = 0°, cos 0° = 1.
Question 13. The cgs unit of work is:
A. joule
B. erg
C. dyne
D. watt
Solution.
Answer: B. erg
CGS units are based on centimetre, gram and second. 1 erg = 1 g cm2 s−2. One erg is the work done by a force of one dyne which produces a displacement of one centimetre. Also 1 erg = 10−7 J.
Teacher's Note: Joule is SI, erg is cgs; dyne is cgs force, watt is power.
Exam Note: Remember 1 J = 107 erg.
Question 14. One joule work is said to be done when:
A. a force of 1 N displaces a body by 1 cm
B. a force of 1 N displaces a body by 1 m
C. a force of 1 dyne displaces a body by 1 m
D. a force of 1 dyne displaces a body by 1 m
Solution.
Answer: B. a force of 1 N displaces a body by 1 m
SI unit of work is the joule (J). 1 joule = 1 newton × 1 metre. One joule of work is done when a force of 1 N moves an object through a distance of 1 m in the direction of the force.
(Note: options C and D are printed identically in the book.)
Teacher's Note: 1 J = 1 N × 1 m along the force.
Exam Note: Define joule with N and m, not cm or dyne.
Question 15. The speed of a particle is doubled, its kinetic energy:
A. remains same
B. becomes double
C. becomes four times
D. becomes half
Solution.
Answer: C. becomes four times
KE = ½ m v2, so KE is directly proportional to the mass and to the square of the speed. KE2 = ½ m (2v1)2 = 4 KE1.
Teacher's Note: KE is proportional to v squared, so doubling v quadruples KE.
Exam Note: Show (2v)2 = 4v2 in one line.
Comprehensive Exercises (T/F)
Question 1. Write true or false: When energy changes from one form to another, the energy that disappears from one form reappears in exactly equivalent amount in the other form.
Solution.
Answer: True
Explanation: This is the law of conservation of energy: energy can neither be created nor destroyed, only transformed. The total amount remains constant.
Teacher's Note: Equal amount appears in the new form; total energy is unchanged.
Exam Note: Quote the law of conservation of energy.
Question 2. Write true or false: A force does not work, if it produces no motion.
Solution.
Answer: True
Explanation: Work is said to be done when a force produces motion. If there is no motion, there is no displacement (s = 0), so work done = F × s = 0.
(Correction: the book answered 'False' but its own explanation shows that the statement is true.)
Teacher's Note: No displacement means no work, however large the force.
Exam Note: Use W = F × s with s = 0.
Question 3. Write true or false: Kilowatt hour is the unit of power.
Solution.
Answer: False
Explanation: Kilowatt hour is the commercial unit of energy. 1 kilowatt hour is the electrical energy consumed when an appliance of power rating 1 kilowatt is used for 1 hour. SI unit of power is watt and its larger unit is kilowatt.
Teacher's Note: kW is power; kWh is power multiplied by time, so energy.
Exam Note: 1 kWh = 3.6 × 106 J is often asked.
Question 4. Write true or false: Work and energy have different units.
Solution.
Answer: False
Explanation: The SI unit of work is joule and the SI unit of energy is also joule. Energy required to do 1 joule of work is called 1 joule of energy.
Teacher's Note: Work and energy share the unit joule since work measures energy transferred.
Exam Note: Both are measured in joule (J).
Question 5. Write true or false: In order to get minimum work, the angle between force and displacement should be 90°.
Solution.
Answer: True
Explanation: W = F s cos θ. If θ = 90°, cos θ = 0, so work done is zero, which is the minimum for a force acting with a positive displacement in this sense.
Teacher's Note: Perpendicular force does zero work; cos 90° = 0.
Exam Note: Support with W = Fs cos θ.
Question 6. Write true or false: When a body falls on the ground and stops, the principle of conservation of energy is violated.
Solution.
Answer: False
Explanation: Initially the body has only potential energy. As it falls, potential energy is transferred to kinetic energy and the total stays constant. On stopping, the kinetic energy changes into heat and sound, so the principle is not violated.
Teacher's Note: Energy turns to heat and sound at impact; it is not destroyed.
Exam Note: Mention conversion to heat and sound on impact.
Question 7. Write true or false: When velocity is halved, its kinetic energy becomes 1/4th.
Solution.
Answer: True
Explanation: KE1 = ½ m v12. If v2 = v1/2, KE2 = ½ m (v1/2)2 = ¼ (½ m v12) = ¼ KE1.
Teacher's Note: Half speed gives one-quarter KE because of the square.
Exam Note: Show the (1/2)2 = 1/4 step.
Question 8. Write true or false: When an arrow is released from a bow, potential energy changes into kinetic energy.
Solution.
Answer: True
Explanation: When the bowstring is pulled, the bow stores elastic potential energy. When it is released, the arrow moves with speed, i.e. the stored potential energy is converted into kinetic energy of the arrow.
Teacher's Note: Stored elastic energy of the bow becomes arrow's motion energy.
Exam Note: Name the elastic potential energy of the bow.
Question 9. Write true or false: Work done by a force depends upon how fast work is done.
Solution.
Answer: False
Explanation: Work depends on force and displacement only. How fast work is done is given by power, which is the rate of doing work.
Teacher's Note: Speed of doing work is power, not work.
Exam Note: Work = F × s has no time term.
Question 10. Write true or false: The rate of doing work is called power.
Solution.
Answer: True
Explanation: Yes, the rate at which work is done is called power. Power is also the rate at which energy is consumed. SI unit of power is watt.
Teacher's Note: Power = W/t; unit watt = joule per second.
Exam Note: Write P = W/t with unit watt.
Question 11. Write true or false: Work done by centripetal force is zero.
Solution.
Answer: True
Explanation: In circular motion, the centripetal force is directed towards the centre and acts at right angle to the direction of motion. W = F s cos θ with θ = 90° gives cos 90° = 0, so work done is zero.
Teacher's Note: Force is perpendicular to velocity; speed does not change.
Exam Note: Use θ = 90° to show W = 0.
Question 12. Write true or false: The unit of work is watt.
Solution.
Answer: False
Explanation: SI unit of work is joule (J), and SI unit of power is watt (W). 1 joule = 1 newton × 1 metre.
Teacher's Note: Watt measures power; work is in joule.
Exam Note: Do not mix joule (work) and watt (power).
Question 13. Write true or false: If we know the speed and mass of an object, we can find out its kinetic energy.
Solution.
Answer: True
Explanation: Kinetic energy KE = ½ m v2 depends on the mass and speed of the object, so knowing m and v we can find KE.
Teacher's Note: Only m and v are needed in ½mv2.
Exam Note: State KE = ½mv2 and substitute.
Free study material for Science
Class 9 Mathematics: Evergreen Solutions for Evergreen Solutions Class 9 Science Chapter 12 Work Power And Energy
Chapter-wise Evergreen Solutions: Evergreen Solutions Class 9 Science Chapter 12 Work Power And Energy
Explore reliable mathematical solutions for Evergreen Solutions Class 9 Science Chapter 12 Work Power And Energy tailored for Class 9 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Detailed Calculation Guides for Class 9
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Next Steps in Your Mathematics Revision
In addition to these Evergreen Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 9 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.