Evergreen Solutions Class 9 Science Chapter 1 Matter In Our Surroundings

Official Textbook Solutions: Class 9 Science Chapter 01 Matter In Our Surroundings

Review structured textbook solutions for Class 9 Science Chapter 01 Matter In Our Surroundings prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Science: Chapter 01 Matter In Our Surroundings

Navigate directly to the solved Science textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

1. Matter in Our Surroundings

Periodic Test

Question 1. What do you mean by fluidity?

Solution.

The ability of a substance to flow is called fluidity. The substances which show fluidity are called fluids. Liquid and gas are examples of fluids. The particles of liquid and gas are able to move freely because there is a large space between them.

Teacher's Note: Fluidity is the ability to flow; only liquids and gases show it because their particles move freely.

Exam Note: Define fluidity and name liquids and gases as fluids.

Question 2. What is evaporation?

Solution.

Evaporation is the phenomenon in which a liquid is converted into gas at a temperature below its boiling point at atmospheric pressure. Drying of clothes and cooling of hot tea/milk kept open in a glass are due to evaporation.

Teacher's Note: Evaporation occurs at any temperature below boiling point and only at the surface.

Exam Note: Mention 'below boiling point' and 'surface' to score full marks.

Question 3. Why does a gas exert pressure?

Solution.

The particles present in the gas move randomly at high speed. As a result, the gas particles hit the walls of the container in which it is kept, at high speeds. The particles can also hit each other. The pressure exerted by the gas is because of the force exerted by the particles per unit area of the container.

Pressure = Force/Area

Teacher's Note: Gas pressure comes from countless particle collisions with the walls; stress force per unit area.

Exam Note: Write Pressure = Force/Area along with the collision explanation.

Question 4. What determines the state of a substance, whether it will be solid, liquid or gas?

Solution.

The state of a substance is determined by the inter-molecular forces present in it. If the inter-molecular forces are so strong that the substance is rigid and has fixed shape and volume, then the state of the substance is solid. The state of a substance is liquid if the inter-molecular forces hold the particles in such a way that the substance has no fixed shape but fixed volume. The state of a substance is gas if the inter-molecular forces among the particles are weak. Gases do not have a fixed shape or volume.

Teacher's Note: The relative strength of inter-molecular forces and particle spacing fixes whether matter is solid, liquid or gas.

Exam Note: Compare shape and volume for all three states in a line each.

Question 5. Define specific heat of a substance.

Solution.

The amount of heat energy for a substance of unit mass (for example 1 kg) required to raise its temperature by one unit (1°C or 1 K) is called specific heat of the substance.

Teacher's Note: Specific heat is heat for unit mass per unit temperature rise; do not confuse it with latent heat.

Exam Note: Include both 'unit mass' and 'unit rise in temperature'.

Question 6. Give Reasons for the Following: Why are we able to sip hot tea or milk faster from a saucer rather than a cup?

Solution.

The surface area of a saucer is greater than that of a cup. It is to be noted that the rate of evaporation increases with an increase in surface area. This is because, as the surface area is increased, more particles in the surface are exposed to the surroundings and hence more particles would get converted into a vapour phase by acquiring energy from surroundings.

Teacher's Note: Larger surface area exposes more particles, so evaporation and cooling are faster in a saucer.

Exam Note: Link surface area to rate of evaporation, then cooling.

Question 7. Give Reasons for the Following: A gas fills completely the vessel in which it is kept?

Solution.

Gas does not have a fixed shape or volume. The inter-molecular forces among the particles of a gas are the weakest. So they are able to move freely within the vessel.

Teacher's Note: Weakest inter-molecular forces let gas particles spread to occupy the whole available space.

Exam Note: Say gases have no fixed shape or volume.

Question 8. Give Reasons for the Following: Why do we see water droplets on the outer surface of a glass containing ice-cold water?

Solution.

The water vapour present in the air comes in contact with the glass containing ice-cold water. The vapour loses its energy to the cold water and gets converted to water droplets which we see on the outer surface of the glass. This process is called condensation.

Teacher's Note: Water vapour in air condenses on the cold glass; the water does not seep through the glass.

Exam Note: Name the process as condensation to earn the mark.

Question 9. Give Reasons for the Following: Why should we wear cotton clothes in summer?

Solution.

We perspire more in summer. Sweat present in the surface of our body absorbs the energy equal to the latent heat of vapourisation and gets converted to vapour. This gives a cooling effect to our body. This is called evaporative cooling. Cotton is a good absorber of water. Hence, cotton clothes absorb the sweat and expose it to the surroundings for easy evaporation.

Teacher's Note: Cotton absorbs sweat and exposes it to air, so evaporation takes latent heat from the body.

Exam Note: Write 'evaporative cooling' and mention cotton absorbs water.

Question 10. Give Reasons for the Following: Why does a desert cooler cool better on a hot dry day?

Solution.

The humidity (amount of water vapour present in the air) is low on a dry day. Being a hot dry day, the temperature is high and the humidity is low. The rate of evaporation increases with

i. increase in temperature

ii. decrease in humidity

Therefore the rate of evaporation and hence the cooling effect due to evaporation is high on a hot dry day. Thus, desert cooler cools better on a hot dry day.

Teacher's Note: Dry air has low humidity, and heat raises evaporation, so cooling is greater in hot dry weather.

Exam Note: Quote both factors: higher temperature and lower humidity.

Question 11. Differentiate between solids, liquids and gases with respect to : (a) fluidity (b) kinetic energy (c) density (d) shape (e) rigidity (f) compressibility.

Solution.

(a) The ability of a substance to flow is called fluidity. Fluidity is only possible if there is enough space among the particles of the substance and the inter-molecular forces must not be very strong.

Solids have very strong inter-molecular forces of attraction among the particles forming it. They tend to maintain shape and have fixed volume.

Liquids and gases have weak inter-molecular forces of attraction when compared to solids. Hence, they have a tendency to obtain the shape of the container in which they are kept.

(b) Kinetic energy is the energy associated with the motion of particles. In solids, the particles do not move much due to strong inter-molecular forces of attraction. Therefore, the kinetic energy of the particles of solid is very low.

In liquids, particles can move, but there still is a force of attraction among them. The kinetic energy of particles of liquid is greater than that of solids.

In gases, there are weak inter-molecular forces of attraction among the particles. They are able to move very freely within the container in which it is kept. Therefore the kinetic energy of particles is high in gases.

The order of increase in kinetic energy of the particles of the matter is:

Solid<Liquid<Gas

(c) Density refers to the amount of matter present in a given volume. Density increases with increase in the inter-molecular forces of attraction among the particles forming the matter which leads to more number of particles within the given space.

Since the order of strength of inter-molecular forces of attraction is:

Gases<Liquids<Solids

The increase in order of density for different states of matter is given by:

Gases<Liquids<Solids

(d) The shape of a substance is determined by the packing of particles which is due to the strength of inter-molecular forces of attraction among them.

In solids, particles are tightly packed as there are strong forces of attraction of particles. Hence solids have a fixed shape.

In liquids, particles are loosely packed. As a result, liquids do not have a fixed shape, but they take the shape of the container in which it is kept.

Gas particles are more loosely packed when compared to liquids due to weak forces of attraction. Therefore gases too do not have a fixed shape.

(e) Rigidity is the property of a substance to retain shape. Solids tend to maintain a fixed shape when subjected to external forces. Liquids have a tendency to obtain the shape of the container in which they are kept as the particles are loosely packed.

The particles of a gas are linked by weak forces of attraction. Thus gases do not have a fixed shape.

The increase in the order of rigidity is as follows: Gases<Liquids<Solids

(f) A substance is compressible only if there is enough space between particles of the substance.

In solids, the particles are tightly packed and hence there is very little empty space inside the substance. Therefore, solids are very difficult to be compressed.

In liquids, there is some space between the particles and is compressible, but it requires a high amount of pressure to compress them.

In gases, there is a large space between the particles and hence is highly compressible.

Teacher's Note: Answer all six points comparatively; kinetic energy and density orders run opposite to compressibility order.

Exam Note: A table of six properties is quick and scores well.

Question 12. How evaporation differs from boiling?

Solution.

EvaporationBoiling
The liquid is converted into vapour state at a temperature below the boiling point at atmospheric pressure.The liquid is converted into a gaseous state at boiling point at atmospheric pressure.
Evaporation is a surface phenomenon.Boiling is a bulk phenomenon.

Teacher's Note: Boiling is bulk and occurs at one fixed temperature; evaporation is surface-only and at any temperature.

Exam Note: Give two points of difference; table format preferred.

Question 13. Differentiate between gas and vapour.

Solution.

GasVapour
State of matterA substance which coexists with liquid or solid at room temperature.
Gas in its natural state is gas at room temperature.Vapour in its natural state is liquid or solid.
Appears at temperatures ≥ boiling point.May occur at temperatures below boiling point.
Example: Helium, NeonExample: water vapour

Teacher's Note: A vapour is the gaseous form of something normally liquid or solid at room temperature; a gas is not.

Exam Note: Give example pairs: helium as gas, water vapour as vapour.

Question 14. What are the characteristics of the particles of matter?

Solution.

The characteristics of the particles of matter are:

(1) Particles of matter have space between them:

All matter consists of particles which have space between them. Hence when two different substances are mixed, the particles of one substance get into the spaces between particles of the other. The intermixing of particles of two different types of matter on their own is called diffusion.

(2) Particles of matter attract each other:

The particles of matter are held together by forces of attraction. These inter-molecular forces of attraction are responsible for the physical and chemical nature of the substance.

The strength of the force of attraction between particles of matter increase in the order:

Gases<Liquids<Solids

Teacher's Note: Two properties: spaces between particles and mutual attraction; give diffusion as evidence for the first.

Exam Note: Mention diffusion and the order Gases

Question 15. Give Reasons Only: A. Water at room temperature is a liquid. B. Naphthalene balls disappear with time without leaving any solid. C. We can get smell of perfume several metres away.

Solution.

A. At room temperature, the energy present in the water molecules is sufficient to overcome the inter-molecular forces of attraction that would be present in ice (solid phase), but not enough to get converted into the gaseous phase. Thus water exists as a liquid at room temperature.

B. Naphthalene balls undergo sublimation process in which the naphthalene balls (solid) are converted into their vapour state directly. Therefore, they disappear without leaving any solid behind. Naphthalene balls are commonly used to store clothes. They prevent the attack of moths or molds on the clothes or other materials.

C. The particles of perfume (gaseous state) mix with the air quickly. This process of intermixing on their own is called diffusion. The diffused particles move with high speeds due to weak inter-molecular forces of attraction and travel long distances (several metres). Hence we can smell the perfume from several meters away.

Teacher's Note: Link each observation to energy of particles versus inter-molecular forces; naphthalene shows sublimation.

Exam Note: Use the terms sublimation and diffusion correctly.

Question 16. What are the factors which affect the rate of evaporation? Explain.

Solution.

The factors which affect the rate of evaporation are:

(1) Surface area:

Evaporation is a surface phenomenon. As the surface area increases, more particles present in the liquid surface are exposed to the surroundings, and the rate of evaporation also increases.

(2) Temperature:

With the increase in temperature, more particles are provided with kinetic energy to escape into the vapour state. Hence the rate of evaporation increases.

(3) Humidity:

Humidity is the amount of water vapour present in the air. For a given temperature, the air can only hold a particular amount of water vapour. So if the humidity is high, the amount of water vapour is high and hence the further conversion of a liquid into a vapour state is difficult or not favourable. Hence the rate of evaporation decreases.

(4) Wind Speed:

Increase in wind speed results in more moving away from water vapour particles with the wind, decreasing the amount of water vapour present in the air in that area. So the rate of evaporation increases with the wind speed.

Teacher's Note: Surface area, temperature, humidity and wind speed all affect evaporation; explain each direction.

Exam Note: List four factors with increase or decrease effect each.

Question 17. A. What produces more severe burns, boiling water or steam? B. For any substance, why does the temperature remain constant during the change of state?

Solution.

A. At a given temperature, particles of steam are at higher kinetic energy than that of boiling water. Therefore, steam would produce more severe burns than boiling water.

B. During the change of state, the heat energy supplied to the substance is completely used to overcome the forces of attraction between the particles of the substance. So there is no change in the temperature of the substance during its change of state. The energy supplied at that time is called latent heat.

Teacher's Note: Steam carries extra latent heat, so it burns more than boiling water at the same temperature.

Exam Note: Explain latent heat is absorbed or released without temperature change.

Question 18. A. Give two characteristic properties of a liquid. B. Why does our palm feel cold when we put alcohol or perfume on it? C. Give two factors which determine the rate of diffusion of a liquid in another liquid.

Solution.

A. The particles of liquid have the ability to flow. The particles are loosely packed and can move from one place to another. This property is called fluidity.

Liquids have the ability to acquire the shape of the container in which it is kept in. This is possible because of the fluidity of liquids.

B. When alcohol or perfume is put on our palm, the particles of alcohol/perfume gain energy from our palm or surroundings and evaporate. This produces a cooling effect to the palm. The principle behind this is evaporative cooling.

C. The rate of diffusion of a liquid in another liquid is affected by:

(1) Viscosity and chemical nature:

Viscosity is the resistance offered to the flow of liquids, or simply it is the thickness of the liquid. The rate of diffusion also depends upon the chemical nature of the liquids.

(2) Temperature:

An increase in temperature would increase the kinetic energy of the liquid particles which increases the rate of diffusion between them.

Teacher's Note: Answer all three parts; evaporative cooling explains the cold feeling on the palm.

Exam Note: Part C: viscosity/chemical nature and temperature are the factors.

Question 19. Draw a labelled diagram to show the sublimation of Ammonium chloride.

Solution.

Ammonium chloride (NH4Cl) is taken on a china dish. It is covered by placing an inverted funnel. The neck of the funnel is plugged using cotton. This is heated with the help of a burner as shown in the figure.

Cotton plugInverted funnel (tube)Ammonium chloridesolidifiedChina dishBurnerAmmonium chloridevapours

Sublimation of ammonium chloride

One can see that ammonium chloride starts to sublime (to convert into gaseous phase without entering liquid phase). The ammonium chloride vapours try to escape, but the funnel is completely sealed. Therefore, the ammonium chloride vapours after rising up lose energy and get solidified along the walls of the funnel. This process from vapour to solid state is also called sublimation.

Teacher's Note: Show a funnel with cotton plug over a china dish; vapours resolidify on funnel walls.

Exam Note: Label china dish, funnel, cotton plug, burner and the solidified salt.

Question 20. How will you show that, by applying pressure, particles of matter can be brought close together?

Solution.

Consider a cylinder containing a certain amount of gas. To apply pressure, the piston is lowered towards the gas particles as shown in the figure.

PistonPistonPistonCylinderCylinderCylinderCompression of gas

One can observe that as the applied pressure increases, the gas particles are forced to come closer and closer. As a result, there is an increase in the inter-molecular forces of attraction. Further increase in pressure would result in the liquefying of gas.

Teacher's Note: Pushing the piston reduces particle spacing, showing gas compressibility and that pressure squeezes particles together.

Exam Note: Draw piston positions and note particles come closer.

Question 21. Show diagrammatically, the interconversion of the three states of matter.

Solution.

The interconversion of the three states of matter – solid, liquid, gas is illustrated by the following figure.

LiquidSolidGasFusionSolidificationVapourisationCondensationSublimationSublimation

Interconversion of the three states of matter

From the figure, one can summarise that:

Starting state of matterEnding state of matterName of the process
SolidLiquidFusion
SolidGasSublimation
LiquidSolidSolidification (Freezing)
LiquidGasVapourisation
GasSolidSublimation
GasLiquidCondensation

Teacher's Note: Sublimation appears twice in the figure: solid to gas and gas to solid.

Exam Note: Label all six arrows with correct process names.

Question 22. Ice melts by absorbing heat. When it melts, its temperature remains the same. Where does the heat energy go?

Solution.

When ice reaches its melting point, the energy supplied to the system (ice) is used to overcome the force of attraction between the solid particles and converts the solid into a liquid state. At this point, there is no rise in temperature. The energy is completely used in the change of state from solid to liquid (or also called melting). This heat energy used in the conversion is called the latent heat of fusion. It is called “latent” or hidden because the supplied heat energy is not used to raise the temperature of ice.

Teacher's Note: Latent heat of fusion breaks inter-particle attraction, not raising temperature; 'latent' means hidden.

Exam Note: Name latent heat of fusion; say temperature stays constant.

Question 23. 2 ml of dettol is added to a beaker containing 500 mL of water and stirred. State four observations that you can make.

Solution.

When 2 ml of dettol is added to a beaker containing water, one can see that:

(a) Dettol completely mixes with water. After mixing, one cannot distinguish the dettol content from water.

(b) The smell of dettol could be identified after stirring.

(c) A slight colour change can also be observed while stirring. The mixture becomes slightly white in colour.

(d) The concentration of dettol is reduced. The effects (for example the ability to kill germs) shown by the mixture of dettol+water is less than that of 2 ml of dettol alone.

Teacher's Note: Dettol mixes uniformly (diffusion) and dilutes; observe smell, colour change and reduced strength.

Exam Note: Four observations, one line each, are enough.

Question 24. Water is kept in an earthen pot (matka) during summer. Why is it so?

Solution.

An earthen pot contains tiny holes. The particles present in the water surface acquire energy from the surroundings and get converted into vapour (The process involved is evaporation). The vapours escape through these tiny holes producing a cooling effect to the water inside the pot.

Comprehensive Exercises (MCQ)

Teacher's Note: Water seeps into pores, evaporates, and takes latent heat from the remaining water, cooling it.

Exam Note: Mention pores, evaporation and cooling effect.

Comprehensive Exercises (MCQ)

Question 1. In which state of matter, the process of diffusion is fastest:
A. Liquids
B. Gases
C. Solids
D. Semi-Solids

Solution.

Correct option: (B) Gases

The process of intermixing of particles of two different types of matter on their own is called diffusion. In gases, the molecules move freely at high speeds. There is a larger space between the gas molecules when compared to the spaces between molecules in solids and liquids. This is why the process of diffusion is the fastest in gases.

Teacher's Note: Gas particles have the largest spacing and speed, so they intermix fastest.

Exam Note: Diffusion fastest in gases, then liquids, then solids.

Question 2. Evaporation is called as:
A. Surface phenomenon
B. Bulk phenomenon
C. Both surface and the bulk phenomenon
D. Unique phenomenon

Solution.

Correct option: (A) Surface phenomenon

Evaporation is the phenomenon of change of a liquid into vapour phase at temperatures below its boiling point. A small fraction of the particles present in the liquid surface having higher kinetic energy breaks away from the force of attraction between other liquid particles to become vapour. Since surface particles contribute to evaporation, evaporation is a surface phenomenon.

Teacher's Note: Only surface particles escape during evaporation, unlike boiling in the whole bulk.

Exam Note: Remember: evaporation = surface; boiling = bulk.

Question 3. During the evaporation process, the heat is:
A. Absorbed
B. Evolved
C. First absorbed then evolved
D. Initially evolved and then absorbed

Solution.

Correct option: (A) Absorbed

Evaporation takes place when the particles present in the liquid surface acquire more kinetic energy by absorbing heat from the surroundings. These particles escape from the force of attraction of other particles and get converted into the vapour phase.

Teacher's Note: Surface particles take heat from the surroundings to escape, causing cooling.

Exam Note: Evaporation absorbs heat, which is why it cools.

Question 4. Boiling process is a:
A. Surface phenomenon
B. Bulk phenomenon
C. Both surface and the bulk phenomenon
D. Rare phenomenon

Solution.

Correct option: (B) Bulk phenomenon

Boiling is the process of conversion of a liquid into the vapour state. This happens when the particles of the bulk of the liquid gain enough energy to break the force of attraction between the particles of liquid.

Teacher's Note: Bubbles form throughout the liquid during boiling, so it is a bulk phenomenon.

Exam Note: Contrast boiling bulk with evaporation surface.

Question 5. The state of matter which is found to be more stable at lower temperature:
A. Solid
B. Liquid
C. Gas
D. BEC

Solution.

Correct option: (A) Solid

At low temperatures, there is less kinetic energy associated with the particles of matter. Therefore, the particles only vibrate in their positions. Since the energy from surroundings is not able to break the bond or force of attraction between the particles, the particles tend to be in a solid state with distinct boundaries and fixed volume.

Teacher's Note: Low temperature means low kinetic energy, so particles stay locked in a solid.

Exam Note: Solid is most stable at lowest temperatures.

Question 6. The gas can be liquefied by:
A. Lowering temperature and pressure
B. Raising temperature and pressure
C. Lowering temperature and raising pressure
D. Lowering pressure only

Solution.

Correct option: (C) Lowering temperature and raising pressure

By lowering temperature, the energy of surroundings become less than that of the gaseous particles. Then there is a transfer of energy from gas to the surroundings. Thus the gas molecules lose energy and get converted to a liquid state.

By raising pressure, the particles of gas come closer and closer and get converted to a liquid state.

Teacher's Note: Cooling reduces energy and pressure pushes particles closer, so gases liquefy.

Exam Note: Both cooling and compressing are needed together.

Question 7. Intermolecular forces of attraction are least effective in:
A. Solids
B. Gases
C. Liquids
D. Plasma

Solution.

Correct option: (B) Gases

In gases, there is a large space between the gaseous particles and the particles move at high speeds. This is because of the weak intermolecular forces of attraction. The intermolecular forces of attraction are higher in solids, liquids, and plasma.

Teacher's Note: Weak forces and large spacing make gas particles the least attracted.

Exam Note: Order of forces: Gas < Liquid < Solid.

Question 8. Evaporation of a liquid takes place at:
A. A fixed temperature lower than its boiling point.
B. A fixed temperature higher than its boiling point.
C. A fixed temperature and pressure.
D. All temperatures.

Solution.

Correct option: (D) All temperatures.

Evaporation is the phenomenon in which a liquid is converted into vapour state at any temperature below the boiling point of the liquid.

Teacher's Note: Evaporation needs no fixed temperature; boiling does.

Exam Note: Evaporation: any temperature below boiling point.

Question 9. When water gets solidified into ice, then heat is:
A. Absorbed
B. Evolved
C. First absorbed then evolved
D. Initially evolved and then absorbed

Solution.

Correct option: (B) Evolved

The molecules of water have more energy than that of ice. When solidified, the water molecules must lose energy to the surroundings to form ice. So heat is evolved in the conversion of water to ice.

Teacher's Note: Freezing releases energy to the surroundings, so heat is evolved.

Exam Note: Condensation and freezing evolve heat.

Question 10. Boiling of a liquid takes place at
A. A fixed temperature lower than its boiling point.
B. A fixed temperature and normal atmospheric pressure.
C. A fixed temperature higher than its boiling point.
D. A fixed temperature and higher atmospheric pressure.

Solution.

Correct option: (B) A fixed temperature and normal atmospheric pressure.

A liquid starts to boil at the boiling point. Boiling point is the temperature at which the liquid starts changing to gas at atmospheric pressure. So the conditions for boiling are fixed temperature and normal atmospheric pressure.

Teacher's Note: Boiling needs a fixed temperature at normal pressure; higher pressure raises boiling point.

Exam Note: Boiling point depends on external pressure.

Question 11. Arrange the following in the increasing order of ‘forces of attraction’:
A. Water, air, sugar
B. Salt, air, juice
C. Oxygen, water, sugar
D. Sugar, oil, air

Solution.

Correct option: (C) Oxygen, water, sugar

The increasing order of forces of attraction for the three states of matter (solid, liquid, gas) is as follows:

Gas<Liquid<Solid

Here, water → liquid, air → gas, sugar → solid, oxygen → gas, salt →solid, oil → liquid, juice → liquid.

The option which obeys the above order is (C)

Teacher's Note: Solids have strongest forces, gases weakest; identify state of each substance first.

Exam Note: Classify each substance's state before arranging.

Question 12. Which condition out of the following increase the evaporation of water.
A. Increase in temperature of the water
B. Increase in pressure of water
C. The decrease in the surface area of water
D. Adding sugar to water

Solution.

Correct option: (A) Increase in temperature of the water

When the temperature is increased, more number of particles get enough kinetic energy to go into the vapour state, increasing the rate of evaporation.

Teacher's Note: Higher temperature gives particles more energy to escape; pressure and sugar do not help.

Exam Note: Temperature, surface area, wind rise and humidity fall help evaporation.

Question 13. The property to flow is unique to fluids. Which one of the following statements is correct?
A. Only liquids are fluids
B. Gases and solids behave like fluids
C. Gases and liquids behave like fluids
D. Only gases behave like fluids

Solution.

Correct option: (C) Gases and liquids behave like fluids

States of matter which have the ability to flow are called fluids. Flow refers to the movement of particles of matter. One can find that the particles of liquid and gas are able to flow as there is enough space between the particles constituting liquid and gas. In the case of solids, there is a restriction in movement of particles as there are strong forces of attraction between them.

Teacher's Note: Fluids are those that flow: both liquids and gases, not solids.

Exam Note: Fluidity belongs to liquids and gases only.

Question 14. What will be the correct sequence of temperature when 25°C, 46°C and 99°C are converted to the Kelvin scale?
A. 289 K, 319 K, 382 K
B. 298 K, 391 K, 382 K
C. 298 K, 319 K, 328 K
D. 298 K, 319 K, 372 K

Solution.

Correct option: (D) 298 K, 319 K, 372 K

One can obtain the temperature in Kelvin scale using the following relation:

x°C = (x+273) K

∴ 25°C = (25+273) K = 298 K

46°C = (46+273) K = 319 K

99°C = (99+273) K = 372 K

Teacher's Note: K = °C + 273; add 273 carefully to each value.

Exam Note: Show the K = °C + 273 working.

Question 15. Which is the correct statement?
A. conversion of solid into liquid is called sublimation.
B. conversion of vapours into solid without passing through the liquid state is called sublimation.
C. conversion of solid into vapours without passing through the liquid state is called vaporisation.
D. conversion of vapours into solid without passing through the liquid state is called freezing.

Solution.

Correct option: (B) conversion of vapours into solid without passing through the liquid state is called sublimation.

Sublimation could be one of the following:

(1) Conversion of solid into vapour without passing through liquid state

(2) Conversion of vapour into solid without passing through liquid state

Freezing is the conversion from liquid to solid, and vaporisation is the conversion from liquid to gas.

Comprehensive Exercises (T/F)

Teacher's Note: Sublimation is solid to vapour or vapour to solid without liquid state.

Exam Note: Define sublimation with both directions.

Comprehensive Exercises (T/F)

Question 1. Write true or false for the following statements: The movement of tiny particles in a gas or liquid is called Tyndall effect.

Solution.

False

The random zig-zag movement of tiny particles suspended in a gas or liquid is called Brownian motion. (The ability of a substance to flow is called fluidity.)

Tyndall effect is the phenomenon of light scattering by particles in a colloid.

Teacher's Note: Brownian motion is the random movement of tiny particles; Tyndall effect is light scattering.

Exam Note: State the correct term to earn the explanation mark.

Question 2. Write true or false for the following statements: The force of attraction between the constituent particles in any form of matter is known as inter-molecular force.

Solution.

True

Inter-molecular forces are present in all states of matter. They are the highest in solids and lowest in gases. Inter-molecular forces determine the structure of the substance.

Teacher's Note: Inter-molecular forces act in all states of matter; they are strongest in solids.

Exam Note: Say strongest in solids, weakest in gases.

Question 3. Write true or false for the following statements: Solids are very rigid and cannot flow from one place to another.

Solution.

True

The inter-molecular forces in solids are very strong. This restricts the movement of the particles in the solid. Therefore solids have a rigid structure and fixed volume.

Teacher's Note: Solid particles only vibrate about fixed positions, so solids are rigid.

Exam Note: Link rigidity to strong inter-molecular forces.

Question 4. Write true or false for the following statements: The diffusion in liquids depends upon the thickness (viscosity) as well as on the chemical nature of the diffusing liquids.

Solution.

True Viscosity is the property of resistance offered to the flow of a fluid (liquid or gas). It is informally referred to as “thickness”

Diffusion is the process of intermixing of two different states of matter on their own. Not all substances diffuse well, as it depends upon the chemical nature and viscosity of the diffusing liquids.

Teacher's Note: Viscosity and chemical nature both control the rate of diffusion in liquids.

Exam Note: Add temperature as another factor if asked.

Question 5. Write true or false for the following statements: The Celsius scale is an absolute temperature scale.

Solution.

False

Kelvin scale is an absolute temperature scale. The conversion of ° celsius to kelvin is:

x°C = (x+273) K (approximately; more precisely 273.15)

The lowest possible temperature is 0 K (=-273°C (approx.)) which is also referred to as absolute zero.

Teacher's Note: Kelvin is the absolute scale, whose zero is absolute zero.

Exam Note: Absolute zero is 0 K, about -273 °C.

Question 6. Write true or false for the following statements: 0°C = -273 K

Solution.

False

The relation between Celsius scale and Kelvin scale is:

x°C = (x+273) K

When x = 0,

0°C = (0+273) K = 273 K

Teacher's Note: 0 °C equals 273 K, not -273 K; Kelvin has no negative values.

Exam Note: K = °C + 273; show the substitution.

Question 7. Write true or false for the following statements: -273°C = 0 K

Solution.

True The relation between Celsius scale and Kelvin scale is:

x°C = (x+273) K

When x = -273,

-273°C = (-273+273) K = 0 K

Teacher's Note: Absolute zero -273 °C equals 0 K exactly by the conversion formula.

Exam Note: Substitute -273 into K = °C + 273.

Question 8. Write true or false for the following statements: The term vapour describes the gaseous state of a substance that normally exists as a liquid or solid.

Solution.

True

Consider the case of water. In room temperature, it exists in liquid state. When heated to 100°C, water gets converted into water vapour.

The natural state of a substance that gives vapour is solid or liquid at room temperature, but for a gas the natural state at room temperature is the gaseous state itself.

Teacher's Note: Vapour is gaseous form of substance normally liquid or solid at room temperature.

Exam Note: Water vapour is the standard example.

Question 9. Write true or false for the following statements: Latent heat means the heat which can be seen easily.

Solution.

False

The word “latent” means hidden. Latent heat refers to the amount of heat energy required to convert 1 kg of a particular state of matter into another at a constant temperature (and atmospheric pressure).

For example, latent heat of fusion refers to the amount of heat energy required to convert 1 kg of a solid into liquid at atmospheric pressure at its melting point.

Teacher's Note: Latent means hidden: heat absorbed with no temperature rise.

Exam Note: Say latent heat changes state, not temperature.

Question 10. Write true or false for the following statements: Gases can be liquefied easily by applying pressure and reducing temperature.

Solution.

True

When pressure is applied to gases (or when gases are compressed) the gaseous particles are forced to come closer and get liquefied. When the temperature is reduced, the energy of gaseous particles is higher than the surroundings. As a result the gaseous particles lose energy and become liquids.

Teacher's Note: Compression and cooling both bring gas particles closer, so gases liquefy.

Exam Note: Give both factors: pressure raised, temperature lowered.

Evergreen Solutions for Class 9 Mathematics: Evergreen Solutions Class 9 Science Chapter 1 Matter In Our Surroundings

Chapter-wise Evergreen Solutions: Evergreen Solutions Class 9 Science Chapter 1 Matter In Our Surroundings

Access the complete chapter-wise PDF for Evergreen Solutions Class 9 Science Chapter 1 Matter In Our Surroundings. These structured Evergreen Solutions solutions for Class 9 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Additional Study Materials for 2026

In addition to these Evergreen Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 9 Science?

They are chapter-wise solved questions from the book for Class 9 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 9 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 9 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 9 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 9 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.