Solutions for Class 9 Science: Chapter 01 Matter In Our Surroundings
Explore reliable textbook solutions for Chapter 01 Matter In Our Surroundings tailored for Class 9 learners using methodologies. Utilizing these Science answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Practice Class 9 Science Solutions: Chapter 01 Matter In Our Surroundings
Access the complete solution PDF for Class 9 Science below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Check Point 01
Question 1. What was the basic classification of element in ancient time? Name them.
Solution.
In ancient time, the element is classified in the form of five basic elements – the “Panch Tatva” which are air, earth, fire, sky and water
According to ancient people, living or non-living things was made up of these five basic elements.
Teacher's Note: Ancient thinkers believed all matter is made of five basic elements, called Panch Tatva.
Exam Note: Remember the five: air, earth, fire, sky, water.
Question 2. (i) As the temperature rises, particles move ……………..
(ii) With increase in temperature, the kinetic energy of the particles also ………… .
(iii) The rate of diffusion of liquids is ………… than that of solids.
Solution.
i. faster
Particles of matter are continuously moving and as we increase the temperature, particles move faster. Their speed increases to a great extent.
ii. increases
Particles of matter are continuously moving, that is, they possess what we call kinetic energy. As the temperature increases, kinetic energy of the particles also increases.
iii. higher
The rate of diffusion of liquids is higher than that of solids because in the liquid state, the particles move freely. There is so much space between each other. In solids, the particles are packed tightly and cannot move freely.
Teacher's Note: Particles of matter are always moving; heating makes them move faster and gain kinetic energy.
Exam Note: Higher temperature means faster particles and more kinetic energy.
Question 3. A piece of chalk can be broken into small particles on hammering, but it is not possible to break a piece of iron in the same fashion. Why?
Solution.
A piece of chalk can be broken into small particles on hammering, but it is not possible to break a piece of iron in the same fashion because the force of attraction between particles of the chalk is too weak than the force of attraction between the particles of iron. Hence we can easily break chalk by hammering but not pieces of iron.
Teacher's Note: Particles of chalk attract each other weakly, while iron particles are held by much stronger forces.
Exam Note: Weaker force of attraction means the solid breaks easily.
Question 4. Find the density of a handful of sand having a mass of 208 g and it displaces a volume of 80 mL of water.
Solution.
Given:
Mass of sand (m) = 208 g
Volume of water displaced (V) = 80 mL
To calculate density (ρ), apply the formula:
\( \text{Density} = \dfrac{\text{Mass}}{\text{Volume}} \)
\( \text{Density} = \dfrac{208\ \text{g}}{80\ \text{mL}} = 2.6\ \text{g/mL} \)
We know that 1 mL = 1 cm³
Thus, the density of sand is 2.6 g/cm³.
Teacher's Note: Density is mass per unit volume; sand displaces its own volume of water.
Exam Note: Density = mass/volume; 1 mL = 1 cm³.
Question 5. What is fluid?
Solution.
Liquids have no fixed shape but have a fixed volume. They take up the shape of the container in which they are kept. Liquids flow and change shape, so they are not rigid and can be called fluid.
Examples of Fluid:
i. River flowing ii. Blood circulating in our body.
Teacher's Note: A fluid is any substance that can flow, so both liquids and gases are fluids.
Exam Note: Fluid means able to flow; liquids and gases.
Question 6. Why does solid ice float on water?
Solution.
Solid ice floats on water because it has a lesser density than water. This means solid ice is lighter than water. The heavier water removes the lighter ice, hence ice floats to the top.
Teacher's Note: Ice floats because it is less dense than water; molecules in ice are arranged farther apart.
Exam Note: Ice is less dense than water, so it floats.
Question 7. By which physical process the fragrance of burning an incense stick spreads all around?
Solution.
The fragrance of burning incense stick spreads all around by a physical process called diffusion. The spreading and intermixing of a substance with another substance due to the continuous motion of the particles is called diffusion.
Teacher's Note: Diffusion is the intermixing of particles of different substances due to their continuous random motion.
Exam Note: Diffusion: spreading of one substance into another by particle motion.
Check Point 02
Question 1. (i) Higher the melting point of a substance, …… will be the force of attraction between its particles.
(ii) Particles from the bulk of the liquid gain energy to change into ……… state.
(iii) Naphthalene undergoes the process of ……….
Solution.
i. greater
The temperature at which a solid melts to become a liquid at atmospheric pressure is called its melting point. The higher the melting point of a substance, the greater is the force of attraction between its particles, because more energy is needed to overcome it.
ii. vapour
Boiling is a bulk phenomenon. Particles from the bulk of the liquid gain enough energy to change into the vapour state.
iii. sublimation
Naphthalene undergoes the process of sublimation. Sublimation is a change of state directly from solid to gas without changing to the liquid state, or vice versa.
Teacher's Note: Stronger attraction between particles needs higher temperature to melt; boiling is a bulk change; naphthalene sublimes.
Exam Note: Higher melting point means stronger particle attraction.
Question 2. Define vapourization.
Solution.
Vapourization is the process in which a substance changes from the liquid state to the gaseous (vapour) state. It takes place by boiling or by evaporation.
Teacher's Note: Vapourization is the change of a liquid into its vapour (gas) at a temperature, by boiling or evaporation.
Exam Note: Vapourization: liquid to gas.
Question 3. Why particles start vibrating in solids?
Solution.
Particles start vibrating in the solids because:
i. On increasing the temperature of solids, the kinetic energy of the particles increases.
ii. Due to the increase in kinetic energy, the particles start vibrating with greater speed.
Teacher's Note: Heating raises kinetic energy, so particles vibrate faster about their fixed positions.
Exam Note: Heating increases kinetic energy and vibration.
Question 4. Convert the temperature of 70° C to the Kelvin scale.
Solution.
To convert a temperature from the Celsius scale to the Kelvin scale, add 273.
70°C = (273 + 70) K = 343 K
Teacher's Note: Kelvin temperature equals Celsius temperature plus 273.
Exam Note: K = °C + 273.
Question 5. What is the value of the latent heat of fusion of ice?
Solution.
Latent heat of fusion is the amount of heat energy required to change 1kg of a solid into liquid at its melting point. The latent heat of fusion of ice is 80cal/g.
Teacher's Note: Latent heat of fusion is the heat needed to melt a solid completely at its melting point.
Exam Note: Ice: 80 cal/g (about 3.34 × 10⁵ J/kg).
Question 6. Why burns caused by the steam are much more severe than boiling water?
Solution.
Burns caused by the steam is much more severe than boiling water because:
i. Water vapour (steam) at 373k (100°C – boiling point) have more energy than the boiling water at the same temperature.
ii. Particles in steam have absorbed extra energy in the form of latent heat of vaporization.
iii. Hence, due to this extra energy, steam causes more burns than boiling water.
Teacher's Note: Steam holds extra latent heat of vaporization compared with boiling water at the same temperature.
Exam Note: Steam at 100°C has more heat than water at 100°C.
Question 7. How gases can be liquefy?
Solution.
Gases can be liquefy by applying pressure and reducing temperature.
Teacher's Note: Gases can be liquefied by compressing them and cooling them.
Exam Note: Liquefy gas: increase pressure and decrease temperature.
Question 8. What is the major factor which determines the state of matter?
Solution.
Pressure and temperature are the major factors which determine the state of matter whether it is solid, liquid or gaseous state.
Teacher's Note: State of matter changes with temperature and pressure; the diagram shows interconversion of states.
Exam Note: Temperature and pressure decide the state of matter.
Check Point 03
Question 1. What is the SI unit of pressure? Give its value in atm unit.
Solution.
The SI unit of pressure is the pascal (Pa).
Its value in atmosphere units is:
1 atmosphere (atm) = 1.01 × 10⁵ Pa
Note: Atmospheric pressure is the pressure of air in the atmosphere. The atmospheric pressure at sea level is 1 atm.
Teacher's Note: Pressure is force per unit area; its SI unit is the pascal.
Exam Note: SI unit pascal; 1 atm = 1.01 × 10⁵ Pa.
Question 2. By which physical process wet clothes dry up?
Solution.
Wet clothes dry up by the physical process of evaporation:
i. If the surface area is increased, the rate of evaporation also increases.
ii. While putting clothes for drying up, we spread them out (surface area increased)
iii. As a result, the rate of evaporation increases and wet clothes dry up fast.
Teacher's Note: Wet clothes dry by evaporation, which is faster when surface area, wind and temperature are higher.
Exam Note: More surface area means faster evaporation.
Question 3. Name the chemical compound contains in nail-polish remover.
Solution.
Acetone is the chemical compound is present in nail polish remover.
Teacher's Note: Nail polish remover contains acetone, a volatile organic liquid.
Exam Note: Nail polish remover contains acetone.
Question 4. Which state of matter is responsible for the glow of the sun and the stars?
Solution.
There is a fourth state of matter- “plasma”. Plasma state is mainly responsible for the glow of the sun and the stars.
Teacher's Note: Plasma is an ionised gas of very hot, energetic charged particles, as found in stars.
Exam Note: Plasma is the fourth state; sun and stars.
Question 5. Write the full form of BEC.
Solution.
The full form of BEC is Bose-Einstein condensate. A Bose Einstein condensate is the fifth state of matter. This state does not exist under normal conditions.
Teacher's Note: BEC is formed by cooling a gas of very low density to extremely low temperatures.
Exam Note: BEC: Bose-Einstein condensate, fifth state of matter.
Chapter Exercise
Question 1. In what ways all substances around us are alike?
Solution.
All the substances around us are alike because everything around is made up of matter. The air we breathe, the food we eat, stones, clouds, water, plants, and animals – each thing is matter.
Teacher's Note: All substances around us, living or non-living, are made of matter.
Exam Note: Everything is made of matter.
Question 2. In what ways, air can be considered as matter?
Solution.
Matter is defined as anything that has mass and occupies space. Air occupies space and has mass. For example:
i. Take a balloon and blow air into it.
ii. We will see that the balloon expands, which shows that air occupies space.
iii. Weigh the balloon before and after filling it with air.
iv. The difference in mass shows that air has mass.
v. Hence, air can be considered as matter.
Teacher's Note: Matter has mass and occupies space; air shows both properties.
Exam Note: Matter: has mass and occupies space.
Question 3. Name the state of matter that has the tendency to maintain their shape when subjected to outside force.
Solution.
Solid state of matter has the tendency to maintain its shape when subjected to outside force:
For example: A rubber band (solid) changes shape under outside force and regains the same shape when the force is removed.
Teacher's Note: Solids have a definite shape and regain it when a small external force is removed.
Exam Note: Solids keep their shape.
Question 4. When a drop of blue ink is put in water, the blue colour spreads and the whole solution becomes blue. Name the phenomenon due to which this happens.
Solution.
Diffusion is the process through which the ink particles intermix with the water particles because of their continuous random motion. Hence the colour spreads throughout the water and the whole solution becomes blue.
Teacher's Note: Ink particles intermix with water particles through random motion, which is diffusion.
Exam Note: Diffusion: particles intermix on their own.
Question 5. Out of dry and wet air which one is heavier?
Solution.
Dry air is heavier (denser) than wet air because:
i. Dry air consists mainly of nitrogen (N₂) and oxygen (O₂) molecules.
ii. Wet air contains water vapour molecules (H₂O) in place of some of them.
iii. A molecule of nitrogen (molar mass 28 g/mol) or oxygen (32 g/mol) is heavier than a water molecule (18 g/mol), so the same volume of wet air has less mass.
Teacher's Note: At the same volume, dry air is denser than moist air because water vapour molecules are lighter.
Exam Note: Water vapour is lighter than nitrogen and oxygen.
Question 6. Which property of gases helps us in detecting the leakage of LPG gas?
Solution.
The diffusion of gases helps us in detecting the leakage of LPG gas:
i. The gases have large space between its particles.
ii. The speed of the particles is also much faster.
iii. This shows that the gases diffuse very fast into other gases.
Teacher's Note: Gas particles move fast and diffuse quickly, so the smell of leaking LPG spreads and is detected.
Exam Note: Fast diffusion of gases helps detect LPG leaks.
Question 7. Convert the following temperatures to the Kelvin scale.
(i) 65°C
(ii) 300°C
Solution.
(i) 65°C = (273 + 65) K = 338 K
(ii) 300°C = (273 + 300) K = 573 K
Teacher's Note: Convert Celsius to Kelvin by adding 273.
Exam Note: K = °C + 273.
Question 8. Is dry ice the same as ordinary ice?
Solution.
No dry ice is not same as ordinary ice.
i. Solid carbon dioxide is known as dry ice.
ii. It is stored under high pressure.
iii. Solid CO2 gets converted directly to gaseous state on decrease of pressure without changing into liquid state.
iv. Hence, solid CO2 is called dry ice.
Teacher's Note: Dry ice is solid carbon dioxide, which sublimes; ordinary ice is solid water that melts.
Exam Note: Dry ice is solid CO₂ and sublimes.
Question 9. What is humidity?
Solution.
Humidity is the amount of water vapour present in the air. If the amount of water vapour in the air is already high, the rate of evaporation decreases.
Teacher's Note: Humidity is the water vapour in air; high humidity slows evaporation.
Exam Note: High humidity lowers the rate of evaporation.
Question 10. Give examples in which matter is present in the plasma state.
Solution.
Plasma state consists of super energetic and super excited particles. Some examples are:
i. The sun and the stars glow because of the presence of plasma in them.
ii. The plasma is created in the stars at very high temperature.
iii. The fluorescent tube and neon sign bulbs consist of plasma.
Teacher's Note: Plasma is made of super-energetic, excited charged particles found in stars and glowing tubes.
Exam Note: Plasma: stars, tube lights, neon signs.
Question 11. Do solids diffuse? What happens on heating them?
Solution.
Yes, solids diffuse. On heating the solids (by increasing the temperature), the following changes occur:
i. The kinetic energy of the particles increases.
ii. The particles start vibrating with greater speed.
iii. As a result, the particles leave their fixed positions and start moving freely.
iv. It changes to liquid state or gaseous state.
Teacher's Note: Particles of solids also intermix slowly; heating gives them energy to move out of fixed positions.
Exam Note: Solids diffuse slowly; heating speeds it.
Question 12. With the help of an activity show that diffusion becomes faster with the increase in temperature.
Solution.
To prove: Diffusion becomes faster with the increase in temperature.
Activity:
i. Take a beaker A and beaker B.
ii. Pour hot water in beaker A and cold water in beaker B.
iii. Now, put a drop of ink in beaker A and beaker B.
Observations: We will observe that in beaker A, the ink spreads throughout the water faster than in the case of beaker B.
Conclusion: Hence, this activity proves that diffusion becomes faster with increase in temperature.
Teacher's Note: Hotter water particles have more kinetic energy, so ink spreads faster in hot water.
Exam Note: Diffusion increases with temperature.
Question 13. Which is more denser, 1 kg cotton or 1 kg sand? Why?
Solution.
1 kg of sand is denser than 1 kg of cotton.
Explanation: Both have the same mass (1 kg), but 1 kg of sand occupies a much smaller volume than 1 kg of cotton.
From the formula:
\( \text{Density} = \dfrac{\text{Mass}}{\text{Volume}} \)
For the same mass, density is inversely proportional to volume. The smaller the volume, the greater the density. Hence 1 kg of sand, which has the smaller volume, is denser.
Teacher's Note: Density is mass divided by volume; for equal mass, the smaller volume gives the higher density.
Exam Note: Equal mass: smaller volume means higher density.
Question 14. Cotton is solid, but it floats on water. Why?
Solution.
Cotton floats on water because:
i. Cotton is a solid which has minute (porous) holes.
ii. The holes trap air inside themselves.
iii. As a result, the overall, density of cotton becomes less than water.
iv. Being lighter than water, cotton floats on water.
Teacher's Note: Cotton traps air in its pores, so its overall density is less than water.
Exam Note: Trapped air lowers density, so cotton floats.
Question 15. Why are the particles in liquid held together less firmly as compared to solids?
Solution.
In liquids:
i. The force of attraction between the constituent particles is lesser.
ii. The rate of diffusion of liquids are higher than that of solids.
iii. Hence, the particles of liquid move freely.
iv. They have greater space between each other as compared to the particles in the solid state.
v. Due to large space in the liquid, their particles held together less firmly as compared to solids.
Teacher's Note: Liquid particles attract weakly and have more space between them than solid particles.
Exam Note: Weaker attraction, more space: liquids less rigid.
Question 16. How do you differentiate between a gas and a vapour?
Solution.
Difference between gas and vapour:
| Gas | Vapour |
|---|---|
| i. A gas is formed at or above the boiling point of a liquid. | i. Vapour is formed below the boiling point of a liquid. |
| ii. A gas is formed at or above 100°C. | ii. Vapour is formed below 100°C. |
| iii. A gas is formed by the process of boiling. | iii. Vapour is formed by the process of evaporation. |
Teacher's Note: A vapour is the gaseous form formed below boiling point; a gas forms at or above boiling point.
Exam Note: Gas: boiling; vapour: evaporation.
Question 17. Convert 273 K and 373 K into temperatures in Celsius scale. What is the physical state of water at these temperatures?
Solution.
i. 273 K = (273 − 273)°C = 0°C
At 0°C, water can exist as both solid and liquid.
ii. 373 K = (373 − 273)°C = 100°C
At 100°C, water can exist as both liquid and gas.
Teacher's Note: Subtract 273 from Kelvin to get Celsius; 0°C is melting point and 100°C is boiling point of water.
Exam Note: °C = K − 273.
Question 18. Name the state of matter in which the forces between the constituent particles are
(i) strongest
(ii) weakest
Solution.
i. Solid
The force of attraction between the constituent particles of a solid is strongest. The particles are closely arranged and tightly packed.
ii. Gases
The force of attraction between the constituent particles of gases is weakest. In the gaseous state, the particles move freely and randomly at high speed.
Teacher's Note: Solid particles are tightly packed with strongest attraction; gas particles are far apart with weakest attraction.
Exam Note: Solid: strongest forces; gas: weakest forces.
Question 19. Sugar and salt when kept in different jars, take the shape of the jar. Are they solid? Justify your answer.
Solution.
Yes, sugar and salt are solids.
As we know that solids are rigid and have a fixed shape and volume.
i. It is given that sugar and salt when kept in jars, take the shape of the jar.
ii. But each granule of salt and sugar remain in their fixed shape and volume.
iii. The shape and volume of each granule do not change at all. Hence, they are solids.
Teacher's Note: Each granule of sugar or salt keeps its own fixed shape and volume, so they are solids.
Exam Note: Solids: granules keep shape even if heaped.
Question 20. A balloon when kept in sun, bursts after some time. Why?
Solution.
A balloon when kept in sun, bursts after some time because:
i. As we know that on increasing the temperature, the kinetic energy of the gases increase.
ii. When the balloon is kept in the sun, due to sun’s heat (temperature increases), the kinetic energy of the gaseous particles also increases.
iii. As a result, the balloon expands and continues to expand in the sun’s heat.
iv. There comes a point when the balloon bursts.
Teacher's Note: Heat raises the kinetic energy of the gas inside, making it expand until the balloon bursts.
Exam Note: Heating gas increases its kinetic energy and volume.
Question 21. Why do solids are generally denser than liquids and gases?
Solution.
Solids are generally denser than liquids and gases because:
i. The space between the constituent particles of solid is less than that of liquids and gases.
ii. The force of attraction between the particles is maximum.
iii. Hence, large mass is concentrated in a very small volume.
iv. Larger will be the mass, greater will be the density.
v. In case of liquids and gases, there is so much space between the particles.
vi. Hence they don’t have large mass which is concentrated in a very small volume.
vii. So the density of solids is general more than liquids and gases.
Teacher's Note: Solid particles are closely packed with strong attraction, so a large mass lies in a small volume.
Exam Note: Less space between particles means higher density.
Question 22. With the help of an example, explain how diffusion of gases in water is essential?
Solution.
Diffusion of gases in water is essential:
i. The gases from the atmosphere diffuse and dissolve in water.
ii. The gases especially oxygen and carbon dioxide are essential for the survival of aquatic animals and plants.
iii. The aquatic animals can breathe under water due to the presence of dissolved oxygen in water (diffusion of gases of atmosphere and water)
iv. Thus, we may conclude that diffusion of gases in water is essential for the survival of aquatic animals and plants.
Teacher's Note: Atmospheric gases dissolve in water by diffusion; dissolved oxygen supports aquatic life.
Exam Note: Dissolved O₂ and CO₂ sustain aquatic life.
Question 23. How is high compressibility property of gas is useful to us?
Solution.
High compressibility property of gas:
i. Gases are highly compressible.
ii. Due to the high compressibility, large volume of gas can be compressed into a small cylinder and transported easily.
iii. The liquefied petroleum gas (LPG) cylinder that we use in our home for cooking is a compressed gas.
iv. The oxygen supplied to hospitals in cylinders is also a compressed gas.
v. Compressed natural gas (CNG) that we used as fuel in vehicles these days is also a compressed gas.
Teacher's Note: Gases can be squeezed into small volume, so they can be stored and transported in cylinders.
Exam Note: LPG, CNG, oxygen cylinders use compressibility.
Question 24. The melting point of ice is 273.16 K. What does this mean?
Explain in detail.
Solution.
The melting point is defined as the temperature at which a solid melts to become a liquid at the atmospheric pressure. The melting point of ice is 273.16K. This means that at 273.16K temperature, the ice melts and starts converting to liquid water.
Teacher's Note: Melting point is the fixed temperature at which a solid changes to liquid at atmospheric pressure.
Exam Note: Ice melts at 273 K (0°C).
Question 25. How are particles of matter affected with increasing or reducing pressure at a given temperature?
Solution.
On increasing pressure:
i. On increasing pressure, particles of matter come closer.
ii. If pressure is increasingly applied on a gas, the particles come closer and a stage is reached when the gas may change into a liquid.
iii. If pressure is increasingly applied on a liquid, it may change into a solid.
On reducing pressure:
i. On reducing pressure, particles of matter move farther apart.
ii. If pressure on a liquid is reduced, it may change into a gas.
iii. If pressure on a solid is reduced, it may change directly into a gas (sublimation), as in dry ice.
Teacher's Note: Raising pressure pushes particles closer; lowering pressure lets them spread apart, changing the state.
Exam Note: High pressure: closer particles; low pressure: farther apart.
Question 26. Why is it advisable to use pressure cooker at higher altitudes for cooking food?
Solution.
It is advisable to use a pressure cooker at higher altitudes for cooking food because:
i. A liquid boils only when its vapour pressure is equal to the atmospheric pressure.
ii. At high altitudes, the atmospheric pressure is very low.
iii. This causes water to boil at a lower temperature, so food takes a long time to cook.
iv. A pressure cooker increases the pressure inside, so the water boils at a higher temperature.
v. As a result, food cooks quickly.
Teacher's Note: Water boils at lower temperature at altitude; a pressure cooker raises pressure so water boils hotter.
Exam Note: Cooker raises boiling point, so food cooks faster.
Question 27. On a hot sunny day, why do we feel pleasant sitting under a tree?
Solution.
On a hot sunny day, we feel pleasant sitting under a tree because:
i. As we know that tree has lot of leaves. Leaves continuously loss water through their small pores present in them.
ii. When this lost water from tiny pores comes in contact with the surface of leaf, the water evaporates.
iii. This evaporation causes cooling effect.
iv. This makes the surrounding cool.
Teacher's Note: Leaves lose water vapour, and evaporation takes heat from the surroundings, cooling the air.
Exam Note: Evaporation causes cooling.
Question 28. (i) Give reason.
(a) Plasma is found in the stars.
(b) The molecules of a solid have the strongest intermolecular forces.
(ii) Out of four gases Cl2, CO2, CH4, N2, which gas would diffuse most rapidly and why?
Solution.
i. (a) Plasma is found in the stars because of very high temperature. The plasma state consists of highly excited and energetic particles. The sun and the stars glow mainly because of the presence of plasma in them.
(b) The force of attraction between the constituent particles of a solid is strongest. The particles are closely arranged and tightly packed. Hence they have the strongest intermolecular forces.
(ii) CH₄ gas would diffuse most rapidly because its molar mass (16 g/mol) is the least among all the given gases (Cl₂ 71, CO₂ 44, N₂ 28). The rate of diffusion is inversely proportional to the square root of the molar mass. The lighter the gas, the higher the rate of diffusion. Hence CH₄, being the lightest gas, diffuses fastest.
Teacher's Note: Stars are very hot so matter is plasma; lighter gases diffuse faster than heavier ones.
Exam Note: Rate of diffusion decreases as molar mass increases.
Question 29. When ice at –10°C is slowly heated, temperature of ice gradually increases till 0°C, the temperature of the system remains constant when the ice change into water and then further rises. Explain the observation.
Solution.
When ice is at 0°C, the temperature of the system remains constant because the heat supplied is used up in changing the state of matter from solid to liquid. This heat is known as the latent heat of fusion.
Teacher's Note: During melting, heat supplied breaks particle attraction instead of raising temperature; this is latent heat.
Exam Note: Temperature stays constant during change of state.
Question 30. Write an activity of show that the rate of diffusion of liquids decreases with increase in density of the liquids.
Solution.
To show that the rate of diffusion of liquids decreases with increase in density of the liquids:
Activity:
i. Take two beakers and pour some water in them.
ii. Pour some honey in first beaker and pour small drops of ink in another beaker.
iii. Leave both the beakers untouched for a while.
Observations: We will observe that the ink whose density is low gets mixed easily and spreads throughout the water. On the other hand, honey whose density is high does not get mixed and takes more time to dissolve.
Conclusion: We conclude that rate of diffusion of liquids decreases with increase in density of the liquids.
Teacher's Note: Denser, more viscous liquids mix more slowly than light ones.
Exam Note: Denser liquid diffuses more slowly.
Question 31. Show by an activity that the gases are highly compressible as compared to liquids.
Solution.
To prove that the gases are highly compressible as compared to liquids: Activity:
i. Take two 100mL syringes and close their nozzles by rubber corks as shown in the figure below.
ii. Remove the pistons from all the syringes.
iii. Now fill water in the second syringe and leave the first syringe untouched.
iv. Now insert the pistons back into both the syringes.
v. Now try to compress the content of each syringe by pushing the piston.
Observations: We will observe that the syringe with gas is easily pushed in as compared to that of the syringe with water.
Conclusion: We will conclude that gases are highly compressible as compared to liquids.
Teacher's Note: Gas particles are far apart, so gas compresses easily, unlike water.
Exam Note: Gases are highly compressible; liquids hardly.
Question 32. Describe an activity of determine the boiling point of water and melting point of ice.
Solution.
To determine the boiling point of water:
Activity:
i. Take a small amount of water in a beaker and suspend a thermometer so that its bulb (lower part) is in contact with the water.
ii. Put a glass rod in the beaker and start heating the beaker till the water starts boiling.
iii. Note the temperature when the water starts boiling.
Conclusion: The temperature at which water starts boiling at atmospheric pressure is called the boiling point of water.
To determine the melting point of ice:
Activity:
i. Take about 150 g of ice in a beaker and suspend a thermometer so that its bulb (lower part) is in contact with the ice.
ii. Start heating the beaker at a very low flame.
iii. Note the temperature when the ice starts melting.
Conclusion: The temperature at which ice starts melting into the liquid state is called the melting point of ice.
Teacher's Note: Water boils at 100°C and ice melts at 0°C at atmospheric pressure.
Exam Note: Boiling point 100°C; melting point 0°C.
Question 33. Pressure and temperature determine the state of a substance. Explain this in detail.
Solution.
Pressure:
On increasing pressure:
i. On increasing pressure, particles of matter come closer.
ii. If pressure is increasingly applied on a gas, the particles come closer and a stage is reached when the gas may change into a liquid.
iii. If pressure is increasingly applied on a liquid, it may change into a solid.
On reducing pressure:
i. On reducing pressure, particles of matter move farther apart.
ii. If pressure on a liquid is reduced, it may change into a gas.
iii. If pressure on a solid is reduced, it may change directly into a gas (sublimation).
Temperature:
On increasing temperature:
i. The kinetic energy of the particles increases.
ii. Due to the increase in kinetic energy, the particles start vibrating with greater speed.
iii. As a result, the particles leave their fixed positions and start moving freely.
iv. If temperature is increasingly applied on a solid, it will change into the liquid state.
On decreasing temperature:
i. On decreasing the temperature of any state, the particles come closer.
ii. If we reduce the temperature of a gas, it will change into a liquid.
iii. If we reduce the temperature of a liquid, it will change into a solid.
Teacher's Note: Pressure and temperature change how close particles are, so they decide the state of matter.
Exam Note: Both pressure and temperature decide state.
Question 34. A student spilled a bottle of ammonia in one corner of the laboratory. Soon the laboratory was filled with pungent irritating smell. The students immediately opened the windows and doors and switched on the exhaust fans. After some time, students got relief. What did actually happen? Explain.
Solution.
Ammonia is a strong gas which has a very pungent irritating smell.
i. When the student spilled the bottle of ammonia, diffusion of gases took place.
ii. The speed of the gas particles is very high and there is very large space between them.
iii. As a result, the gas diffuses very fast into other gases (air).
iv. Hence, the smell of ammonia filled the whole laboratory.
v. Opening the doors and windows and switching on the exhaust fans removed the ammonia from the laboratory, so the students got relief.
Teacher's Note: Ammonia gas particles move fast and diffuse through air; ventilation then removes the gas.
Exam Note: Gases diffuse rapidly; ventilate to remove fumes.
Question 35. Neha by mistake spilled a glass of water on the floor. Her mother suggested her to switch on the fan and after few minutes she found that all water disappears. She asked her mother how this happened and where all water has disappeared. On the basis of this, answer the following questions:
(i) What was the phenomenon associated with disappearance of water?
(ii) Why her mother suggested Neha to switch on the fan?
(iii) What are the values associated with her mother?
Solution.
i. Evaporation is the phenomenon which is associated with disappearance of water.
ii. Her mother suggested Neha to switch on the fan because water will evaporate faster in the presence of high amount of air coming from the moving fan. As a result, water will evaporate quickly and the floor will be dried very fast.
iii. Her mother is aware and concern.
Teacher's Note: Water on the floor changes into vapour by evaporation, faster with moving air.
Exam Note: Moving air increases the rate of evaporation.
Challengers
Question 1. The SI unit of volume is cubic metre (m³). The common unit of measuring volume in litre (L). Then, 1L = …… dm³, 1L = ………. mL and 1 mL = …….. cm³.
A. 1L = 1 dm³, 1L = 100 mL, 1 mL = 10 cm³
B. 1L = 1 dm³, 1L = 1000 mL, 1 mL = 1 cm³
C. 1L = 10 dm³, 1L = 1000 mL, 1 mL = 1 cm³
D. 1L = 10 dm³, 1L = 100 mL, 1 mL = 10 cm³
Solution.
The correct option is (B).
1 L = 1 dm³, where “dm” stands for decimetre.
1 L = 1000 mL, where “mL” stands for millilitre.
1 mL = 1 cm³, where “cm” stands for centimetre.
Teacher's Note: Litre, millilitre and cubic units of volume are related by fixed conversion factors.
Exam Note: 1 L = 1 dm³ = 1000 mL = 1000 cm³.
Question 2. Find out the incorrect increasing/decreasing order in the following.
A. Force of attraction : Oxygen < water < sugar
B. Increasing intermolecular space : Solids < liquids < gases
C. Diffusion: Solid < liquid < gas
D. Kinetic energy : Hydrogen > honey > water
Solution.
The correct option is (D).
Options A, B and C are correct orders. In option D, the kinetic energy of particles depends on the temperature and not on the kind of substance, so at the same temperature hydrogen, honey and water particles have the same average kinetic energy. Hence the given order is incorrect.
Teacher's Note: Average kinetic energy of particles depends on temperature, not on whether the substance is a gas or liquid.
Exam Note: Kinetic energy depends on temperature alone.
Question 3. Kinetic energy of particles of water in three vessels X, Y and Z are Ex, Ey and Ez respectively. Then the temperature of water in the three vessels are
A. TZ > TX > TY
B. TX > TY > TZ
C. TX > TZ > TY
D. TY > TZ > TX
Solution.
The correct option is (B).
It is given that the kinetic energy of particles of water in three vessels X, Y and Z are Ex, Ey and Ez respectively. As we know, on increasing the temperature, the kinetic energy of the particles also increases. Hence the temperature of the water in the three vessels follows the order:
TX > TY > TZ
Teacher's Note: Higher temperature means higher average kinetic energy of the particles.
Exam Note: Higher kinetic energy means higher temperature.
Question 4. Which of the following statement is correct?
A. Sponge is compressible, but considered as a solid.
B. A rubber band, change shape under force and not regains the same shape when force is removed?
C. Mass multiply be volume is called density of its substance.
D. The common name of solids and liquids is fluid.
Solution.
The correct option is (A).
A sponge has minute holes in it. Air is trapped in these holes. When we press the sponge, the air is expelled and we are able to compress it easily. Hence a sponge is compressible but is considered a solid.
Teacher's Note: A sponge has air-filled pores, so it can be squeezed even though it is a solid.
Exam Note: Sponge is a solid, though compressible.
Question 5. Match the column (I) (hypothesis) with column (II) (evidence that supports it)
| Column I (Hypothesis) | Column II (Evidence) | ||
|---|---|---|---|
| P. | Particles in a solid move farther apart on heating. | I. | You can smell dinner cooking in the kitchen when you are in your bedroom. |
| Q. | Different particles of different elements have different masses. | II. | It is easier to squash a balloon filled with air than a balloon filled with water. |
| R. | Gas particles always spread out to fill the space available to them. | III. | A metal rod expands on heating. |
| S. | Gas particles are farther apart than liquid particles. | IV. | A gold bracelet is much heavier than an identical silver bracelet. |
A. P-III, Q-IV, R-II, S-I
B. P-IV, Q-I, R-II, S-III
C. P-I, Q-II, R-III, S-IV
D. P-IV, Q-III, R-II, S-I
Solution.
The correct option is (A): P-III, Q-IV, R-II, S-I.
P: Particles in a solid move farther apart on heating - A metal rod expands on heating. The kinetic energy of the particles increases. As a result, the particles leave their fixed positions and start moving freely.
Q: Different particles of different elements have different masses - A gold bracelet (has large mass and density) is much heavier than an identical silver bracelet (has lower density and mass).
R: Gas particles always spread out to fill the space available to them - It is easier to squash a balloon filled with air than a balloon filled with water.
S: Gas particles are farther apart than liquid particles - You can smell dinner cooking in the kitchen when you are in your bedroom.
Teacher's Note: Each hypothesis about particles of matter is supported by a matching everyday observation.
Exam Note: Match each hypothesis with its observed evidence.
Question 6. You are given the following substances with their boiling and melting points.
| Substance | Boiling point (°C) | Melting point (°C) |
|---|---|---|
| A | −183 | −219 |
| B | 445 | 119 |
| C | 78 | −15 |
Point out the physical states of A, B and C at room temperature (30°C).
A. A-Gas, B-Solid, C-Liquid
B. A-Gas, B-Liquid, C-Solid
C. A-Liquid, B-Solid, C-Gas
D. A-Solid, B-Liquid, C-Gas
Solution.
The correct option is (A).
A: boiling point −183°C, so at 30°C it is a gas.
B: melting point 119°C, so at 30°C it is a solid.
C: melting point −15°C and boiling point 78°C, so at 30°C it is a liquid.
Hence A is a gas, B is a solid and C is a liquid.
Teacher's Note: A substance is gas above its boiling point, liquid between melting and boiling points, solid below melting point.
Exam Note: Compare room temperature with melting and boiling points.
Question 7. Among the following, which one is the false statement?
A. Sublimation is the process of conversion of a matter from its liquid state to gaseous state at specific conditions of temperature and pressure.
B. Naphthalene, camphor, iodine, ammonium chloride are undergo sublimation.
C. The melting point of ice is 0°C or 273.16 K
D. Condensation is the process of conversion of matter from its gaseous state to liquid state at specific conditions of temperature and pressure.
Solution.
The correct option is (A).
Sublimation is a change of state directly from solid to gas without changing to the liquid state, or vice versa. Hence statement A is false.
Teacher's Note: Sublimation is a direct solid-to-gas change, not liquid-to-gas.
Exam Note: Sublimation: solid to gas directly.
Question 8. Effect of change of temperature on the physical state many be represented as
What is X, Y and Z?
A. X = Liquid state, Y = Gaseous stage, Z = Solid state
B. X = Solid state, Y = Gaseous state, Z = Liquid state
C. X = Liquid state, Y = Solid state, Z = Gaseous state
D. X = Solid state, Y = Liquid state, Z = Gaseous state
Solution.
The correct option is (D): X = solid state, Y = liquid state, Z = gaseous state.
As we increase the temperature of any state, particles move farther apart:
i. If we increase the temperature of a solid, it will change into a liquid.
ii. If we increase the temperature of a liquid, it will change into a gas.
As we decrease the temperature of any state, the particles come closer:
iii. If we reduce the temperature of a gas, it will change into a liquid.
iv. If we reduce the temperature of a liquid, it will change into a solid.
Teacher's Note: Heating moves matter solid to liquid to gas; cooling reverses it.
Exam Note: Heat: solid, liquid, gas; cooling reverses.
Question 9. What will be the correct sequence of temperature when 25°C and 45°C are converted to Kelvin scale and Fahrenheit scale?
A. 278.16 K, 308.16 K, 74° F, 103° F
B. 298.16 K, 318.16 K, 74° F, 103° F
C. 298.16 K, 318.16 K, 77° F, 113° F
D. 318.16 K, 298.16 K, 77° F, 113° F
Solution.
The correct option is (C).
In Kelvin scale:
For 25°C: 25°C = (273.16 + 25) K = 298.16 K
For 45°C: 45°C = (273.16 + 45) K = 318.16 K
In Fahrenheit scale:
For 25°C, apply the formula:
\( \text{Temperature in Fahrenheit} = \text{Temperature in Celsius} \times \dfrac{9}{5} + 32 \)
\( t = 25 \times \dfrac{9}{5} + 32 = 77 \)
Temperature in Fahrenheit = 77°F
For 45°C, apply the formula:
\( \text{Temperature in Fahrenheit} = \text{Temperature in Celsius} \times \dfrac{9}{5} + 32 \)
\( t = 45 \times \dfrac{9}{5} + 32 = 113 \)
Temperature in Fahrenheit = 113°F
Teacher's Note: Kelvin = Celsius + 273.16 as used here; Fahrenheit = Celsius × 9/5 + 32.
Exam Note: °F = (9/5)°C + 32; K = °C + 273.16.
Question 10. The non-SI units and SI units of some physical quantities are given in Column I and Column II respectively. Match the units belonging to the same physical quantity.
| Column I | Column II | ||
|---|---|---|---|
| P. | Degree Celsius | I. | Kilogram |
| Q. | Centimetre | II. | Pascal |
| R. | PSI | III. | Metre |
| S. | Milligram | IV. | Kelvin |
A. P-IV, Q-III, R-II, S-I
B. P-III, Q-IV, R-I, S-II
C. P-II, Q-III, R-IV, S-I
D. P-I, Q-II, R-III, S-IV
Solution.
The correct option is (A): P-IV, Q-III, R-II, S-I.
The non-SI unit of temperature is degree Celsius and its SI unit is kelvin.
The non-SI unit of length is centimetre and its SI unit is metre.
The non-SI unit of pressure is PSI (pounds per square inch) and its SI unit is pascal.
The non-SI unit of mass is milligram and its SI unit is kilogram.
Teacher's Note: Each quantity has an SI unit: temperature in kelvin, length in metre, pressure in pascal, mass in kilogram.
Exam Note: SI units: K, m, Pa, kg.
Free study material for Science
Step-by-Step All In One Solutions for Class 9 Math
Access Class 9 Mathematics Solutions
Explore reliable mathematical solutions for All In One Solutions Class 9 Science Chapter 1 Matter In Our Surroundings tailored for Class 9 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Mastering Core Concepts with All In One Solutions
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Complete Your Class 9 Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 9 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.