CBSE Class 9 Mathematics Surface Areas and Volumes MCQs Set 07

Multiple Choice Questions (MCQs) for Class 9 Mathematics: Chapter 11 Surface Areas and Volumes

Explore reliable objective questions for Chapter 11 Surface Areas and Volumes tailored for Class 9 learners. Utilizing these Mathematics multiple-choice formats ensures thorough preparation and strengthens problem-solving speed for upcoming school assessments.

Practice Chapter 11 Surface Areas and Volumes MCQs for Class 9 Mathematics

Navigate directly to the 50 objective questions for Chapter 11 Surface Areas and Volumes using the digital viewer below. Each practice set includes verified answer keys, allowing students to instantly cross-check their work and identify areas requiring further revision.

Multiple Choice Questions

Question 1: A right circular cylinder is a solid generated by the revolution of
(a) a rectangle about one of its sides
(b) a triangle about its altitude
(c) a semicircle about its diameter
(d) a circle about a tangent
Show Answer & Explanation

Answer: (a) a rectangle about one of its sides

Explanation:
1. Rotating a rectangle about one of its sides sweeps out a cylinder.
2. The side it rotates about becomes the axis, and the opposite side traces the curved surface.

Teacher's Note:
1. A right-angled triangle gives a cone, a semicircle gives a sphere.
2. The axis is perpendicular to both bases.

Question 2: The total surface area of a hollow cylinder with outer radius R, inner radius r and height h is
(a) 2π(R + r)(h + R − r)
(b) 2π(R − r)(h + R + r)
(c) π(R² − r²)h
(d) 2πh(R − r)
Show Answer & Explanation

Answer: (a) 2π(R + r)(h + R − r)

Explanation:
1. Outer plus inner curved area: 2πRh + 2πrh = 2πh(R + r).
2. The two ring-shaped ends add 2π(R² − r²) = 2π(R + r)(R − r).
3. Total = 2π(R + r)(h + R − r).

Teacher's Note:
1. Do not forget the two rings at the ends.
2. The volume is πh(R² − r²), which is different.

Question 3: When a cone is cut by a plane parallel to its base, the portion between the plane and the base is called a
(a) frustum of the cone
(b) sector of the cone
(c) cap of the cone
(d) segment of the cone
Show Answer & Explanation

Answer: (a) frustum of the cone

Explanation:
1. The solid left between the cutting plane and the base is a frustum.
2. The part above the plane is a smaller cone.

Teacher's Note:
1. A frustum has two circular faces of different radii.
2. Its slant height is the difference of the slant heights of the two cones.

Question 4: The slant height of a frustum of a cone with height h and end radii R and r is
(a) √(h² + (R − r)²)
(b) √(h² + (R + r)²)
(c) h + R − r
(d) √(h² − (R − r)²)
Show Answer & Explanation

Answer: (a) √(h² + (R − r)²)

Explanation:
1. Draw a perpendicular from the edge of the smaller circle to the base plane. It forms a right triangle with sides h and R − r.
2. So l = √(h² + (R − r)²).

Teacher's Note:
1. Use Pythagoras in the cross-section.
2. Check with R = r (a cylinder): l = h.

Question 5: If a ______ is revolved about one of the sides containing the right angle, the solid generated is a right circular cone.
(a) right-angled triangle
(b) rectangle
(c) semicircle
(d) square
Show Answer & Explanation

Answer: (a) right-angled triangle

Explanation:
1. Rotating a right triangle about one of its perpendicular sides gives a cone.
2. The side rotated about is the height and the other perpendicular side is the radius.

Teacher's Note:
1. The hypotenuse becomes the slant height.
2. Rotating about the hypotenuse gives a double cone.

Question 6: Two cubes each of volume 64 cm³ are joined end to end. The volume of the resulting cuboid is
(a) 148 cm³
(b) 128 cm³
(c) 182 cm³
(d) 821 cm³
Show Answer & Explanation

Answer: (b) 128 cm³

Explanation:
1. Each edge is ∛64 = 4 cm.
2. The cuboid is 8 cm × 4 cm × 4 cm, with volume 128 cm³.

Teacher's Note:
1. Joining the cubes adds their volumes.
2. The cuboid dimensions are 8, 4, 4.

Question 7: A conical vessel with internal radius 5 cm and height 24 cm is full of water. The water is emptied into a cylindrical vessel with internal radius 10 cm. The height to which the water rises is
(a) 2 cm
(b) 3 cm
(c) 1 cm
(d) 4 cm
Show Answer & Explanation

Answer: (a) 2 cm

Explanation:
1. Volume of the cone = ⅓π × 25 × 24 = 200π cm³.
2. Cylinder: π × 100 × h = 200π, so h = 2 cm.

Teacher's Note:
1. Volume of water stays the same.
2. π cancels on both sides.

Question 8: The diagonal of a cube is √6 cm. Its lateral surface area is
(a) 6√6 cm²
(b) 36 cm²
(c) 12 cm²
(d) 8 cm²
Show Answer & Explanation

Answer: (d) 8 cm²

Explanation:
1. Diagonal = a√3 = √6, so a = √2 cm.
2. Lateral surface area = 4a² = 4 × 2 = 8 cm².

Teacher's Note:
1. The diagonal of a cube of edge a is a√3.
2. Lateral area is four faces, not six.

Question 9: The ratio of the volume of a cube to that of the sphere which exactly fits inside the cube is
(a) 8 : π
(b) π : 8
(c) π : 6
(d) 6 : π
Show Answer & Explanation

Answer: (d) 6 : π

Explanation:
1. The sphere has radius r and the cube has edge 2r.
2. Cube volume = 8r³ and sphere volume = (4/3)πr³.
3. Ratio = 8 : (4π/3) = 6 : π.

Teacher's Note:
1. The edge of the cube equals the diameter of the sphere.
2. 6 : π is about 1.91, so the cube is the larger solid.

Question 10: A vessel is a hemispherical bowl mounted by a hollow cylinder. The diameter of the sphere is 14 cm and the total height of the vessel is 13 cm. Its capacity is (π = 22/7)
(a) 1642.66 cm³
(b) 1462.66 cm³
(c) 1662.42 cm³
(d) 1246.26 cm³
Show Answer & Explanation

Answer: (a) 1642.66 cm³

Explanation:
1. The hemisphere has radius 7 cm, so the cylinder has height 13 − 7 = 6 cm and radius 7 cm.
2. Volume = ⅔π × 7³ + π × 7² × 6 = 718.67 + 924.
3. Total = 1642.67 ≈ 1642.66 cm³.

Teacher's Note:
1. Capacity is the sum of the two volumes.
2. Subtract the hemisphere height from the total height first.

Question 11: A cylinder of base diameter 8 cm and height 7 cm is dipped vertically one third into a bucket of paint. The area painted is (π = 22/7)
(a) 108.95 cm²
(b) 553.14 cm²
(c) 318.47 cm²
(d) 226.28 cm²
Show Answer & Explanation

Answer: (a) 108.95 cm²

Explanation:
1. The painted height is 7/3 cm and the radius is 4 cm.
2. Curved part = 2π × 4 × 7/3 = 58.67 cm² and the lower base = π × 16 = 50.29 cm².
3. Total = 108.95 cm².

Teacher's Note:
1. The bottom face is painted as well.
2. Area is in cm², not cm³.

Question 12: Twelve spheres of the same size are made by melting a solid cylinder of diameter 16 cm and height 2 cm. The diameter of each sphere is
(a) √3 cm
(b) 2 cm
(c) 3 cm
(d) 4 cm
Show Answer & Explanation

Answer: (d) 4 cm

Explanation:
1. Volume of the cylinder = π × 8² × 2 = 128π cm³.
2. Each sphere: (4/3)πr³ = 128π ÷ 12, so r³ = 8 and r = 2 cm.
3. Diameter = 4 cm.

Teacher's Note:
1. Volume is conserved when melting.
2. Do not give the radius as the final answer.

Question 13: A bucket of height 8 cm is a frustum of a right circular cone with radii 3 cm (lower end) and 9 cm (upper end). The height of the cone of which the bucket is a part is
(a) 9 cm
(b) 8 cm
(c) 12 cm
(d) 6 cm
Show Answer & Explanation

Answer: (c) 12 cm

Explanation:
1. Let the full cone have height H. The small cone cut off has height H − 8 and radius 3.
2. By similar triangles (H − 8) ÷ H = 3 ÷ 9, so 3H − 24 = H and H = 12 cm.

Teacher's Note:
1. Radii are proportional to heights in similar cones.
2. The cut-off cone has height 4 cm.

Question 14: A bucket of height 8 cm is a frustum of a cone with lower radius 3 cm and upper radius 9 cm. The volume of water it can hold is
(a) 312π cm³
(b) 321π cm³
(c) 123π cm³
(d) 231π cm³
Show Answer & Explanation

Answer: (a) 312π cm³

Explanation:
1. Volume = (π h / 3)(R² + Rr + r²) = (π × 8 / 3)(81 + 27 + 9).
2. = (8π/3) × 117 = 312π cm³.

Teacher's Note:
1. Use the frustum volume formula.
2. 117 = 3 × 39, so the 3 cancels.

Question 15: A bucket of height 8 cm is a frustum of a cone with lower radius 3 cm and upper radius 9 cm. The area of copper sheet needed to make the (closed at the bottom) bucket is
(a) 192π cm²
(b) 129π cm²
(c) 921π cm²
(d) 291π cm²
Show Answer & Explanation

Answer: (b) 129π cm²

Explanation:
1. Slant height l = √(8² + (9 − 3)²) = 10 cm.
2. Curved surface = π(R + r)l = π × 12 × 10 = 120π cm².
3. Add the base: π × 3² = 9π, so the total is 129π cm².

Teacher's Note:
1. An open bucket has the bottom disc but not the top.
2. The slant height uses the difference of radii.

Question 16: The volume of a hollow cylinder with outer radius R, inner radius r and height h is
(a) πh(R² − r²)
(b) πh(R + r)
(c) 2πh(R − r)
(d) π(R² + r²)h
Show Answer & Explanation

Answer: (a) πh(R² − r²)

Explanation:
1. Volume of the material = outer cylinder − inner cylinder = πR²h − πr²h.
2. = πh(R² − r²).

Teacher's Note:
1. The cross-section is a ring of area π(R² − r²).
2. Multiply the ring area by the height.

Question 17: The diagonal of a cuboid with length l, breadth b and height h is
(a) √(l² + b² + h²)
(b) l + b + h
(c) √(lb + bh + hl)
(d) 2(lb + bh + hl)
Show Answer & Explanation

Answer: (a) √(l² + b² + h²)

Explanation:
1. Apply Pythagoras twice: the face diagonal has square l² + b², then the space diagonal squared is l² + b² + h².

Teacher's Note:
1. Do not confuse it with the total surface area 2(lb + bh + hl).
2. For a cube it becomes a√3.

Question 18: The volume of a hemisphere of radius r is
(a) (2/3)πr³
(b) (4/3)πr³
(c) 2πr²
(d) 3πr²
Show Answer & Explanation

Answer: (a) (2/3)πr³

Explanation:
1. A hemisphere is half of a sphere, so its volume is ½ × (4/3)πr³ = (2/3)πr³.

Teacher's Note:
1. 2πr² is the curved surface area and 3πr² is the total surface area.
2. The volume formula has r³.

Question 19: The total surface area of a cone of base radius r and slant height l is
(a) πr(l + r)
(b) πrl
(c) (1/3)πr²h
(d) 2πr(l + r)
Show Answer & Explanation

Answer: (a) πr(l + r)

Explanation:
1. Curved surface area = πrl and the base area = πr².
2. Total = πrl + πr² = πr(l + r).

Teacher's Note:
1. The curved surface alone is πrl.
2. The volume formula is different.

Question 20: The number of solid spheres, each of diameter 6 cm, that can be moulded to form a solid metal cylinder of height 45 cm and diameter 4 cm is
(a) 3
(b) 4
(c) 5
(d) 6
Show Answer & Explanation

Answer: (c) 5

Explanation:
1. Volume of one sphere = (4/3)π × 3³ = 36π cm³.
2. Volume of the cylinder = π × 2² × 45 = 180π cm³.
3. Number = 180π ÷ 36π = 5.

Teacher's Note:
1. Equate total volumes.
2. Check: 5 × 36 = 180.

Question 21: A solid sphere of radius r is melted and cast into a solid cone of height r. The radius of the base of the cone is
(a) 2r
(b) 3r
(c) r
(d) 4r
Show Answer & Explanation

Answer: (a) 2r

Explanation:
1. (4/3)πr³ = (1/3)πR² × r, so R² = 4r².
2. R = 2r.

Teacher's Note:
1. Volume stays the same.
2. π and 1/3 cancel.

Question 22: A sphere of diameter 6 cm is melted and drawn into a wire of diameter 2 mm. The length of the wire is
(a) 12 m
(b) 18 m
(c) 36 m
(d) 66 m
Show Answer & Explanation

Answer: (c) 36 m

Explanation:
1. Sphere volume = (4/3)π × 3³ = 36π cm³. Wire radius = 0.1 cm.
2. π × 0.1² × L = 36π, so L = 3600 cm = 36 m.

Teacher's Note:
1. Convert 2 mm to 0.2 cm before using the radius.
2. 100 cm make 1 m.

Question 23: The areas of three adjacent faces of a cuboid are a, b and c and its volume is V. Then
(a) V = abc
(b) V² = abc
(c) V = a²b²c²
(d) √V = a²b²c²
Show Answer & Explanation

Answer: (b) V² = abc

Explanation:
1. With edges x, y, z the areas are xy, yz, zx and V = xyz.
2. abc = (xyz)² = V².

Teacher's Note:
1. Multiply the three face areas.
2. Square root of abc gives the volume.

Multiple Choice Questions (MCQs) for Class 9 Mathematics Chapter 11 Surface Areas and Volumes

Chapter MCQs with Answers for Class 9 Mathematics

Review structured objective questions for Class 9 Mathematics Chapter 11 Surface Areas and Volumes. Built according to official CBSE guidelines, these MCQ sets support daily revision and core concept reinforcement.

Expert Practice Material for Class 9 Mathematics

Built using the official NCERT book for Class 9, these Mathematics objective sets provide reliable academic guidance. Pair your practice with our recommended NCERT solutions to master optimal problem-solving approaches.

Complete Your Chapter Revision

Follow up your worksheet practice by attempting the interactive online Mathematics MCQ test for this chapter to evaluate your execution speed. All platform resources are free to access.

FAQs

Where can I access latest CBSE Class 9 Mathematics Surface Areas and Volumes MCQs Set 07?

You can get most exhaustive CBSE Class 9 Mathematics Surface Areas and Volumes MCQs Set 07 for free on StudiesToday.com. These MCQs for Class 9 Mathematics are updated for the 2026-27 academic session as per CBSE examination standards.

Are Assertion-Reasoning and Case-Study MCQs included in the Mathematics Class 9 material?

Yes, our CBSE Class 9 Mathematics Surface Areas and Volumes MCQs Set 07 include the latest type of questions, such as Assertion-Reasoning and Case-based MCQs. 50% of the CBSE paper is now competency-based.

How do practicing Mathematics MCQs help in scoring full marks in Class 9 exams?

By solving our CBSE Class 9 Mathematics Surface Areas and Volumes MCQs Set 07, Class 9 students can improve their accuracy and speed which is important as objective questions provide a chance to secure 100% marks in the Mathematics.

Do you provide answers and explanations for CBSE Class 9 Mathematics Surface Areas and Volumes MCQs Set 07?

Yes, Mathematics MCQs for Class 9 have answer key and brief explanations to help students understand logic behind the correct option as its important for 2026 competency-focused CBSE exams.

Can I practice these Mathematics Class 9 MCQs online?

Yes, you can also access online interactive tests for CBSE Class 9 Mathematics Surface Areas and Volumes MCQs Set 07 on StudiesToday.com as they provide instant answers and score to help you track your progress in Mathematics.