Solutions for Class 9 Science: Chapter 02 Is Matter Around Us Pure
Explore reliable textbook solutions for Chapter 02 Is Matter Around Us Pure tailored for Class 9 learners using methodologies. Utilizing these Science answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Practice Class 9 Science Solutions: Chapter 02 Is Matter Around Us Pure
Navigate directly to the solved Science textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Long Answer Type Questions
Question 1. Differentiate between a true solution and a colloid.
Solution.
True solution Colloid
1. A true solution is a homogeneous
1. A colloidal solution is a heterogeneous mixture of two or more substances. mixture of two substances.
2. The size of the particles is less than
2. The range of particle size is between one nanometer. one nanometer to 1000 nanometer.
3. It is always transparent.
3. It is translucent.
4. The particles cannot be seen even with
4. The particles of a colloidal solution can microscope. be seen with microscope.
5. It does not show Tyndall effect.
5. It shows Tyndall effect.
Teacher's Note: True solutions are homogeneous and clear; colloids are heterogeneous and scatter light.
Exam Note: Tabulate with several points.
Question 2. Distinguish between physical change and chemical change.
Solution.
Physical change Chemical change
1. In a physical change, only physical
1. In a chemical change, the chemical properties such as colour, physical state, composition and chemical properties density, volume, etc. change; chemical undergo a change. properties remain unchanged.
2. No new substance is formed in a
2. A new substance is formed in a physical change. chemical change.
3. Very little or no energy in the form of
3. A chemical change is always heat, light or sound is usually absorbed or accompanied by absorption or evolution given out in a physical change. of energy.
4. A physical change is a temporary
4. A chemical change is a permanent change. change.
5. The original form of substance can be
5. Original substance cannot be obtained regained by simple physical methods. by simple physical methods.
6. A physical change is reversible.
6. A chemical change is irreversible.
Teacher's Note: Physical changes alter form only; chemical changes form new substances.
Exam Note: Tabulate with examples.
Question 3. Distinguish between metals and non-metals.
Solution.
Metals Non-metals
1. They have lustre (sheen).
1. They are non-lustrous (dull).
2. They are malleable and ductile.
2. They are neither malleable nor ductile.
3. They have high density and high
3. They have low density and low melting melting and boiling points. and boiling points.
4. Except mercury and gallium, all other
4. Non-metals may exist in solid, liquid or metals are solid at room temperature. gaseous states at room temperature.
5. They are sonorous.
5. They are not sonorous.
6. They are good conductors of heat and
6. They are poor conductors of heat and electricity. electricity.
7. They are generally hard (except
7. Non-metals are generally soft (except sodium and potassium). diamond).
8. They have high tensile strength.
8. They have low tensile strength.
Teacher's Note: Metals are lustrous, malleable and ductile; non-metals mostly are not.
Exam Note: Tabulate several properties.
Question 4. You are provided with a mixture containing sand, iron filings, ammonium chloride and sodium chloride. Describe the procedures you would use to separate these constituents from the mixture.
Solution.
(i) Removing iron filings from the mixture by magnetic separation. Take the mixture in a petri dish and roll a bar magnet over it. Iron filings will get attach to the magnet and thus separate from the mixture.
(ii) Removing ammonium chloride by sublimation Transfer the remaining mixture into China dish and heat it. On heating, ammonium chloride sublimes and solidifies on condensation. The mixture containing sand and sodium chloride left behind in the China dish.
(iii) Removing sand by filtration Make a solution of sand and sodium chloride in water. Filter the solution. Sodium chloride will dissolve in water and sand is left as residue on the filter paper.
(iv) Evaporate the filtrate to dryness to get sodium chloride or by crystallisation.
Teacher's Note: Use magnet, then sublimation, then water dissolution, filtration and evaporation.
Exam Note: Describe steps in order.
Question 5. Classify each of the following as a physical or a chemical change. Give reasons. (a) Drying of a shirt in the sun. (b) Rising of hot air over a radiator. (c) Burning of kerosene in a lantern. (d) Change in the colour of black tea on adding lemon juice to it. (e) Churning of milk cream to get butter.
Solution.
(a) It is a physical change because water is converted from its liquid state to gaseous state because of the sun's heat.
(b) It is a physical change because water in the radiator is converted from a liquid state to gaseous state.
(c) It is a chemical change because combustion of kerosene occurs and new products are formed.
(d) It is a chemical change because there is a reaction between the citric acid in the lemon and the compounds of tea resulting in formation of new products.
(e) It is a physical change because the cream suspended in the milk is separated by churning.
Teacher's Note: Physical changes alter state or form; chemical changes form new substances.
Exam Note: Give a reason for each.
Question 6. Iron filings and sulphur were mixed together and divided into two parts ‘A and S, Part A, was heated strongly while Part 'S' was not heated. Dilute hydrochloric acid was added to both the parts and evolution of gas was seen in both the cases. How will you identify the gases evolved?
Solution.
Part A 𝐻𝑒𝑎𝑡 𝐹𝑒𝑆(𝑠) 𝐹𝑒(𝑠) + 𝑆(𝑠) →
𝐹𝑒𝑠(𝑠) + 2𝐻𝐶𝑙(𝑎𝑞) →𝐹𝑒𝐶𝑙2(𝑎𝑞) + 𝐻2𝑆(𝑔)
Part B
Fe(s) + S(s) → Mixture of iron filings and sulphur When dilute HCl is added to it Fe(s) + S(s) + 2HCI(aq) → FeCl2(aq) + H2(g) Sulphur remains unreacted. H2S gas formed has a foul smell and on passing through lead acetate solution, it turns the solution black. Hydrogen gas burns with a pop sound.
Teacher's Note: Heated mixture forms iron sulphide, unheated stays a mixture.
Exam Note: Write equations, compare parts.
Question 7. A group of students took an old shoe box and covered it with a black paper from all sides. They fixed a source of light (a torch) at one end of the box by making a hole in it and made another hole on the other side to view the light. They placed a milk sample contained in a beaker/tumbler in the box as shown in the figure. They were amazed to see that milk taken in the tumbler was illuminated. They tried the same activity by taking a salt solution but found that light simply passed through it.
(a) Explain why the milk sample was illuminated. Name the phenomenon involved. (b) Same results were not observed with a salt solution. Explain. (c) Can you suggest two more solutions which would show the same effect as shown by the milk solution?Solution.
(a) Milk is a colloid. If a beam of light is put on a milk sample contained in a beaker, the path of light beam is illuminated and becomes visible when seen from the other side. This is because the colloidal particles are big enough to scatter light falling on them. This scattered light enters our eyes and we are able to see the path of light beam. The scattering of light by colloidal particles is known as Tyndall effect.
(b) Salt solution is a true solution. If a beam of light is put on a salt solution kept in a beaker in a dark room, the path of light beam is not visible inside the solution when seen from the other side. This is because salt particles present in it are so small that they cannot scatter light rays falling on them.
(c) Detergent solution, sulphur solution.
Teacher's Note: Colloid particles scatter light (Tyndall effect); true solution particles are too small.
Exam Note: Name Tyndall effect and reason.
Question 8. Fractional distillation is suitable for separation of miscible liquids with a boiling point difference of about 25 K or less. What part of fractional distillation apparatus makes it efficient and possess an advantage over a simple distillation process? Explain using a diagram.
Solution.
The fractionating column packed with glass beads provides a surface for the vapours to collide and lose energy so that they can be quickly condensed and distilled. Also, length of the column would increase the efficiency of separation.
Teacher's Note: Glass beads in the column repeatedly condense and vaporise the mixture.
Exam Note: Name fractionating column and draw.
Question 9. A child wanted to separate the mixture of dyes constituting a sample of ink. He marked a line by the ink on the filter paper and placed the filter paper in a glass containing water as shown in figure. The filter paper was removed when the water moved near the top of the filter paper.
(i) What would you expect to see, if the ink contains three different coloured components? (ii) Name the technique used by the child. (iii) Suggest one more application of this technique.Solution.
(i) The colour component which is more soluble in water dissolves first, rises faster and produces a colour band (spot) on the paper at a higher position. The less soluble colour components dissolve a little later, rise slower and form coloured bands at lower heights. In this way, three different bands will be observed.
(ii) Chromatography
(iii) To separate the pigments present in chlorophyll.
Teacher's Note: Components travel at different rates, forming separate coloured bands.
Exam Note: Name chromatography, describe bands.
Question 10. Show diagrammatically how water is purified in the waterworks system and list the processes involved.
Solution.
The processes involved are sedimentation, loading (with alum to settle suspended impurities), filtration and chlorination.
Teacher's Note: Water is settled, filtered through sand and gravel, then chlorinated.
Exam Note: List the four steps in order.
Free study material for Science
Xam Idea Solutions for Class 9 Mathematics: Xam Idea Solutions Class 9 Science Chapter 2 Is Matter Around Us Pure Long Answer Type Questions
Access Class 9 Mathematics Solutions
Review detailed solutions for Class 9 Mathematics. The Xam Idea Solutions Class 9 Science Chapter 2 Is Matter Around Us Pure Long Answer Type Questions PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Mastering Core Concepts with Xam Idea Solutions
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Complete Your Class 9 Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 9 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.