Step-by-Step Solutions for Class 10 Science Chapter 03 Metal And Non Metals
Access comprehensive textbook solutions for Chapter 03 Metal And Non Metals using the reference material for Class 10 Science. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Download Chapter 03 Metal And Non Metals Textbook Solutions PDF
Access the complete solution PDF for Class 10 Science below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Short Answer Type Questions I
Question 1. Explain why the surface of some metals acquires a dull appearance when exposed to air for a long time.
Solution.
The surface of some metals acquires a dull appearance when exposed to air for a long time due tothe formation of a thin layer of oxide, carbonate or sulphide on their surface by the slow action ofthe various gases present in air.
Teacher's Note: Metal surfaces react with air to form a surface layer of oxide, sulphide or carbonate, which makes them dull.
Exam Note: Mention reaction with air or moisture and the dull compound layer formed.
Question 2. Give two each of the metals that are good conductors and poor conductors of heat respectively.
Solution.
(a) Good conductors: Ag and Cu
(b) Poor conductors: Pb and Hg
Teacher's Note: Silver and copper are best heat conductors, while lead and mercury are poor ones.
Exam Note: Give two names for each category exactly as in the answer.
Question 3. Name one metal and one non-metal that exist in liquid state at room temperature. Also name two metals having melting point less than 310 K (370 C).
Solution.
Metal: Mercury (Hg); Non-metal: Bromine (Br)
Two metals with melting points less than 310K are Cesium (Cs) and Gallium (Ga).
Teacher's Note: Mercury and bromine are liquids at room temperature; some metals have low melting points.
Exam Note: Name one metal and one non-metal, then the two low melting metals.
Question 4. A zinc plate was kept in a glass container having copper sulphate solution. On examining it was found that the blue colour of the soluton is getting fader and fader. After a few days when the zinc plate was taken out of the solution, a number of small holes were noticed in it. State the reason and give chemical equation of the reaction involved.
Solution.
Zinc is more reactive than copper. Hence, when a zinc plate is kept in a solution of copper sulphate, it slowly displaces copper from the solution and blue colour of the solution keeps fading away. Because of zinc going into solution as zinc sulphate a number of holes are seen in the zinc plate. The reaction is + 𝐶𝑢(𝑠) 𝐶𝑢𝑆𝑂4(𝑎𝑞) + 𝑍𝑛(𝑠) → 𝑍𝑛𝑆𝑂4(𝑎𝑞) 𝐵𝑙𝑢𝑒 𝐶𝑜𝑙𝑜𝑢𝑟𝑙𝑒𝑠𝑠
Teacher's Note: Zinc is more reactive than copper, so it displaces copper from copper sulphate, changing the solution and plate.
Exam Note: Observe colour change and brown deposit, and give the displacement equation.
Question 5. Generally, when metals are treated with mineral acids, hydrogen gas is liberated but when metals (except Mn and Mg) are treated with HNO3, hydrogen is not liberated, why?
Solution.
It is because HNO3 is a strong oxidisings agent. It oxidises the H2 produced to H2O and itself getreduced to any of the oxides of the nitrogen, like NO2, NO, etc.
Teacher's Note: Nitric acid is a strong oxidiser, so hydrogen produced is oxidised to water.
Exam Note: Mention oxidising agent, hydrogen oxidised to water, and the exceptions.
Question 6. What happens when (i) Iron nail is placed in silver nitrate solution? (ii) Iron strip is dipped in zinc sulphate solution?
Solution.
(i)Iron is more reactive than silver. Fe(s) + 2AgNO3 (aq) →Fe(NO3)2(aq) + 2Ag(s)
(ii) Iron is below zinc in the reactivity series; therefore, iron cannot displace zinc from zincsulphate solution. No reaction takes place.
Teacher's Note: Metal displacement depends on relative reactivity, so each case gives either a reaction or none.
Exam Note: Answer both parts with equations and give reasons.
Question 7. Why do metals not evolve hydrogen gas with nitric acid?
Solution.
When metal reacts with nitric acid (HNO3), hydrogen gas is not evolved. This is because HNO3 is a strong oxidising agent. It oxidises H2 produced to water and is itself reduced to any of the oxides of nitrogen (N2O, NO or NO2). For example, 3Cu(s) + 8HNO3 (aq) →3Cu (NO3)2(aq) + 2NO (g) + 4H2O (l)
Teacher's Note: Nitric acid oxidises the hydrogen formed, so no hydrogen gas is released in most cases.
Exam Note: State HNO3 is a strong oxidising agent that oxidises hydrogen.
Question 8. (i) Name a metal for each case: (a) It does not react with cold as well as hot water but reacts with steam. (b) It does not react with any physical state of water. (ii) When calcium metal is added to water the gas evolved does not catch fire but the same gasevolved on adding sodium metal to water catches fire. Why is it so?
Solution.
(i) (a) Aluminium, (b) Copper
(ii) In both cases, the gas evolved is H2. When calcium reacts with water the heat evolved is not sufficient for hydrogen to catch fire. On the other hand, sodium metal reacts with water violently and in this case a lot of heat is evolved which is sufficient for hydrogen to catch fire.
Teacher's Note: Metals differ in reactivity with water, cold, hot or steam, and the gas evolved is hydrogen in these cases.
Exam Note: Name the metal for each case and the gas evolved.
Question 9. Which of the following reactions will not occur? Give reasons. (i) MgSO4 (aq) + Fe(s)→FeSO4 (aq) + Mg(s) (ii) MgSO4 (aq) + Cu(s)→CuSO4 (aq) + Mg(s) (iii) CuSO4 (aq) + Fe(s) →FeSO4 (aq) + Cu(s)
Solution.
Reaction (i) will not occur because Fe is less reactive than Mg. Reaction (i) will not occur because Cuis less reactive than Mg.
Teacher's Note: A displacement reaction occurs only if the metal added is more reactive than the metal in the compound.
Exam Note: Use reactivity series to state which reaction does not occur and why.
Question 10. List any two observations when a highly reactive metal is dropped in water.
Solution.
(i) Large amount of heat is evolved.
(ii) Metal starts floating.
Teacher's Note: Highly reactive metals react vigorously with water, releasing heat and gas.
Exam Note: Give two observations like heat evolved and metal floating or moving.
Question 11. State the reason for the following behaviour of zinc metal: On placing a piece of zinc metal in a solution of mercuric chloride, it acquires a shining silvery surface but when it is placed in a solution of magnesium sulphate no change is observed.
Solution.
When a piece of zinc metal is placed in a solution of mercuric chloride (HgCl2).a white layer of mercury is deposited on zinc metal to give it silvery shining look. This is because mercury is lower to zinc in reactivity series and hence, zinc can displace mercury from HgCl2. But when zinc is placed in a solution of magnesium sulphate, there is no change. This is becausemagnesium is above zinc in the reactivity series and hence, zinc cannot displace magnesium from its salt solution.
Teacher's Note: Zinc is more reactive than mercury, so it displaces mercury from mercuric chloride solution.
Exam Note: Mention reactivity and displacement of mercury; add equation if possible.
Question 12. An ore gives carbon dioxide on treatment with a dilute acid. What steps will you take to convert such a concentrated ore into free metal?
Solution.
A metal carbonate reacts with a dilute acid to form carbon dioxide. Therefore, this ore is a carbonate ore. Carbonate ore is converted into free metal in the following two steps:
(1) Calcination: The carbonate ore is strongly heated in the absence of air to get the metal oxide. 𝐶𝑎𝑙𝑐𝑖𝑛𝑎𝑡𝑖𝑜𝑛 𝑀𝑒𝑡𝑎𝑙 𝑜𝑥𝑖𝑑𝑒 + 𝐶𝑎𝑟𝑏𝑜𝑛 𝑑𝑖𝑜𝑥𝑖𝑑𝑒 𝑀𝑒𝑡𝑎𝑙 𝑐𝑎𝑟𝑏𝑜𝑛𝑎𝑡𝑒 →
(ii) Reduction: The metal oxide is reduced with carbon to get free metal. 𝑅𝑒𝑑𝑢𝑐𝑡𝑖𝑜𝑛 𝑀𝑒𝑡𝑎𝑙 + 𝐶𝑎𝑟𝑏𝑜𝑛 𝑚𝑜𝑛𝑜𝑥𝑖𝑑𝑒 𝑀𝑒𝑡𝑎𝑙 𝑜𝑥𝑖𝑑𝑒 + 𝐶𝑎𝑟𝑏𝑜𝑛 → (𝐶𝑜𝑘𝑒)
Teacher's Note: A carbonate ore is converted to oxide by calcination and then reduced to the metal.
Exam Note: Write both steps in order with equations, calcination then reduction.
Question 13. The following reaction takes place when aluminium powder is heated with MnO2. 3MnO2(s) + 4Al(s) →3Mn (l) + 2Al2O3 (l) + Heat (a) Is aluminium getting reduced? (b) Is MnO2 getting oxidised?
Solution.
(a) No, because oxygen is added to aluminium therefore, it is getting oxidised.
(b) No, since manganese has lost oxygen therefore, it is getting reduced.
Teacher's Note: Redox reaction: aluminium gains oxygen and is oxidised while manganese dioxide loses oxygen and is reduced.
Exam Note: State which substance is oxidised and which is reduced with the reason.
Question 14. What is a thermit reaction? State one use of this reaction.
Solution.
The reaction between iron (III) oxide (Fe2O3) and aluminium gives out lots of heat. It is called the thermit reaction. + 𝐻𝑒𝑎𝑡 𝐹𝑒2𝑂3(𝑠) + 2𝐴𝑙(𝑠) → 2𝐹𝑒(𝑙) + 𝐴𝑙2𝑂3(𝑠) 𝐼𝑟𝑜𝑛(𝐼𝐼𝐼) 𝑜𝑥𝑖𝑑𝑒 𝐴𝑙𝑢𝑚𝑖𝑛𝑖𝑢𝑚 𝐼𝑟𝑜𝑛 𝐴𝑙𝑢𝑚𝑖𝑛𝑖𝑢𝑚 𝑜𝑥𝑖𝑑𝑒
This displacement reaction is used to join railway tracks on cracked machine parts. This heat gives out in the reaction melts the iron formed. The molten iron runs down between the tracks and welds them together.
Teacher's Note: The thermit reaction between iron oxide and aluminium releases heat to produce molten iron.
Exam Note: Mention reactants, the heat and the use, such as welding railway tracks.
Question 15. Why should the metal sulphides and carbonates be converted to metal oxides in the process of extraction of metal from them?
Solution.
It is easier to obtain metal from its oxide, as compared from its sulphides and carbonates. So prior to reduction, sulphide ores are converted into oxides by roasting and carbonate ores by calcination.
Teacher's Note: Metal oxides are easier to reduce than sulphides and carbonates, so ores are converted first.
Exam Note: State that reduction of oxides is easier and name roasting and calcination.
Question 16. What is 24-carat gold? How will you convert it into 18-carat gold?
Solution.
24-carat gold is pure gold. Pure gold is very soft and not suitable for making jewllery. Therefore, to increase its hardness, it is alloyed either with copper or sılver. 18-carat gold is prepared by alloying 18 parts pure gold with 6 parts of either copper or silver.
Teacher's Note: Pure gold is soft, so it is alloyed with another metal to harden it for jewellery.
Exam Note: Explain 24-carat as pure gold; 18-carat needs alloying with copper or silver.
Question 17. What would happen to iron railings on the road side if they are not painted? Why does it happen so?
Solution.
If the iron railing on the road side is not painted, a brown rust would form on its surface because the moist air of the atmosphere reacts with iron to form brown flaky substance on its surface. The rust is hydrated iron (III) oxide, Fe2O3.xH2O.
Teacher's Note: Unpainted iron reacts with moist air to form brown rust on its surface.
Exam Note: Mention rust as hydrated iron oxide caused by oxygen and moisture.
Question 18. Explain why, the galvanised iron article is protected against rusting even if the zinc layer is broken.
Solution.
The galvanised iron article is protected against rusting even if the zinc layer is broken because zinc is more easily oxidised than iron. So when zinc layer on the surface of galvanised iron article is broken, then zinc continues to corrode but iron article does not corrode or rust.
Teacher's Note: Zinc is more reactive than iron, so it corrodes first and protects iron even after the coating breaks.
Exam Note: Use sacrificial protection and say zinc oxidises in preference to iron.
Question 19. Why are food cans tin- Plated instead of zinc plated though zinc is cheaper than tin?
Solution.
Tin is less reactive zinc. It is less likely to dissolve in the liquid strored in the food cans. Tin reacts only with powerful acids whereas zinc can easily react even with tomatoes, so it is ot safe to store food in zinc- plated cans.
Teacher's Note: Tin is less reactive than zinc, so it is safer and does not dissolve in foods.
Exam Note: Give reactivity as the reason, not cost.
Question 20. Metals replace hydrogen from dilute acids, whereas non-metals do not. Why?
Solution.
Hydrogen from dilute acids can only be replaced if electrons are supplied to H⁺ ions of the acid. Metals can easily lose electrons and so supply them to H⁺ ions, forming hydrogen gas, but non-metals cannot lose electrons, so they do not replace hydrogen.
Teacher's Note: Metals lose electrons to H⁺ ions; non-metals cannot.
Exam Note: State electron loss as the reason.
Question 21. Why is aluminium oxide considered an amphoteric oxide?
Solution.
Aluminium oxide (Al₂O₃) shows basic as well as acidic behaviour because it reacts with both acids and bases. Thus, it is considered an amphoteric oxide. The two types of reactions given by Al₂O₃ are as follows:
(i) Al₂O₃(s) + 6HCl(aq) → 2AlCl₃(aq) + 3H₂O(l)
(ii) Al₂O₃(s) + 2NaOH(aq) → 2NaAlO₂(aq) + H₂O(l)
Teacher's Note: Al₂O₃ reacts with both acids and bases.
Exam Note: Write both balanced equations.
Free study material for Science
Xam Idea Solutions for Class 10 Mathematics: Xam Idea Solutions Class 10 Science Chapter 3 Metal And Non Metals Short Answer Type Questions I
Access Class 10 Mathematics Solutions
Review detailed solutions for Class 10 Mathematics. The Xam Idea Solutions Class 10 Science Chapter 3 Metal And Non Metals Short Answer Type Questions I PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Concept-Driven Math Answers
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Complete Your Class 10 Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.