Official Textbook Solutions: Class 10 Science Chapter 03 Metal And Non Metals
Review structured textbook solutions for Class 10 Science Chapter 03 Metal And Non Metals prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Chapter-wise Solutions for Science: Chapter 03 Metal And Non Metals
View or download the dedicated Chapter 03 Metal And Non Metals solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Science.
Short Answer Type Questions II
Question 1. Name two metals which react violently with cold water. Write any observation you would make when such a metal is dropped into water. How would you identify the gas evolved, if any, during the reactions?
Solution.
Metals which react violently with cold water are potassium (K) and sodium (Na).
2K + 2H2O → 2KOH + H2 + Heat energy
2Na + 2H2O → 2NaOH + H2 + Heat energy
The hydrogen gas produced during the reaction of these tow metals with water immediately catches fire. Thus, these reactions are violent and exothermic. The gas evolved during these reaction burns with popping sound which confirms that the gas is hydrogen (H2).
Teacher's Note: Potassium and sodium react violently with cold water, giving a metal hydroxide and hydrogen.
Exam Note: Name both metals and give one observation like hydrogen catching fire.
Question 2. Give reasons: (i) Reactivity of Al decreases if it is dipped in HNO3. (ii) Carbon cannot reduce the oxides of Na or Mg. (iii) NaCl is not a conductor of electricity in solid state whereas it does conduct electricity in aqueous solution as well as in molten state. (iv) Metals like Na, K, Ca and Mg are never found in their free in nature.
Solution.
(i) Due to the formation of a layer of oxide, i.e., Al2O3 it becomes less reactive.
(ii) Na or Mg are more reactive metals as compared to carbon. So, their oxides are more stable.
(iii) In solid NaCl, the movement of ions is not possible due to its rigid structure but in aqueous solution or molten state, the ions can move freely. These free ions are responsible for conduction of electricity.
(iv) Na, K, Ca and Mg are highly reactive metals and thus never found in their free state in nature.
Teacher's Note: Aluminium oxide layer makes it unreactive, and carbon cannot reduce oxides of very reactive metals.
Exam Note: Give a separate reason for each part.
Question 3. Explain the following statement: (i) Most metal oxides are insoluble in water but some of these dissolve in water. What are these oxides and their solutions in water called? (ii) At ordinary temperature, the surface of metal such as magnesium, aluminium and zinc, etc. is covered with a thin layer. What is the composition of this layer? State its importance. (iii) Some alkali metals can be cut with a knife.
Solution.
(i) These oxides are called basic oxides and their solutions in water are called alkalis.
(ii) This layer formed is protective oxides layer which prevents the metal from further oxidation.
(iii) Some alkali can be cut with a knife because they are very soft and have low densities.
Teacher's Note: Metal oxides are basic and some are amphoteric; soluble ones form alkalis in water.
Exam Note: Explain each statement in terms of basic, soluble and amphoteric oxide behaviour.
Question 4. When a metal X is treated with cold water, it gives a basic salt Y with molecular formula XOH (molecular mass = 40) liberates a gas Z which easily catches fire. Identify X,Y and Z and also write the reaction involved.
Solution.
Sodium (Na) and potassium (K) react with cold water to form basic salt NaOH and KOH respectively. The molecular mass of NaOH is 40. So, X is Na and Y is NaOH. The gas liberated during the reaction is hydrogen (H2). So. Z is H2. 2Na + 2H2O → 2NaOH + H2 + Heat energy
Teacher's Note: Alkali metals form hydroxides XOH when they react with cold water, so the metal is identified from the formula.
Exam Note: Identify the metals and the basic compounds, and write the reaction equation.
Question 5. Of the three metals X,Y and Z,X reacts with cold water,Y with hot water and Z with steam only. Identify X,Y and Z and also arrange them in order of increasing reactivity.
Solution.
X is an alkali metal, Na or K. Y is an alkaline earth, Mg or Ca. Z is Fe. Increasing reactivity series: Na > Mg > Fe
Teacher's Note: Reactivity with water decreases from alkali metals to alkaline earth metals to iron.
Exam Note: Identify X, Y and Z by water reaction, naming example metals.
Question 6. An element A burns with golden flame in air. It reacts with another element B, atomic number 17 to give a product C. An aqueous solution of product C on electrolysis gives a compound D and liberates hydrogen. Identify A , B, C and D. Also write down the equations for the reactions involved.
Solution.
A – Na; B – Cl2; C – NaCl; D - NaOH 2Na + Cl2 → 2NaCl 2NaCl(aq) + 2H2O(l) → 2NaOH(aq) + Cl2(g) + H2(g)
Teacher's Note: The golden flame and chlorine reaction point to sodium chloride, and electrolysis of its solution gives sodium hydroxide.
Exam Note: Name each compound and write both equations in balanced form.
Question 7. Iqbal treated a lustrous, divalent element M with sodium hydroxide. He observed he formation of bubbles in reaction mixture. He made the same observation when this element was treated with hydrochloric acid. Suggest how can he identify the produced gas. Write chemical equations for both the reactions.
Solution.
The element is a metal. M + 2NaOH → Na2MO2 + H2 M + 2HCl → MCl2 + H2
Teacher's Note: A metal that reacts with both NaOH and HCl releasing hydrogen is amphoteric in behaviour.
Exam Note: Identify it as a metal; write its reactions with acid and base.
Question 8. Give reason: (a) Platinum, gold and silver are used to make jewellery. (b) Sodium, Potassium and lithium are stored under oil. (c) Aluminium is a highly reactive metal, yetit is used to make utensils for cooking.
Solution.
(a) Platinum, gold and silver are used to make jewellery because of their bright shiny surface and high resistance to corrosion. Also they have high malleability and ductility.
(b) Sodium, potassium and lithium are stored under oil to prevent their reaction with oxygen, moisture and carbon dioxide of air so as protect them as they are highly reactive metals.
(c) Aluminium metal forms a thin layer of aluminium oxide all over its surface under the action of moist air. This layer prevents the metal underneath from further corrosion. It is cheap, easily available, malleable and ductile. Therefore, it is used to make utensils for cooking.
Teacher's Note: Reason for uses depends on properties like lustre, softness and reactivity with air and water.
Exam Note: Give each reason separately: lustre, corrosion resistance, and reactivity with air.
Question 9. An ore on heating in air produces sulphur dioxide. Which process would you suggest for its concentration? Describe briefly any two steps involved in the conversion of this concentrated ore into related metal.
Solution.
The ore on heating produces sulphur dioxide gas so it is a sulphide ore. The method used for its concentration is “froth floatation process”. After concentration of the ore following two steps would be followed.to convert it into metal.
(i) Roasting: The sulphide ore is converted into its oxide by heating it in the presence of air. 𝑀𝑆 + 𝑂2 → 𝑀𝑂 + 𝑆𝑂2 ↑
(ii) Reduction of metal oxide to metal: The oxide formed by roasting is then reduced to metal by using a suitable reducing agent like carbon (Coke).
(𝐶𝑜𝑘𝑒) → 𝑀 + 𝐶𝑂 𝑀𝑂 + 𝐶
Teacher's Note: Sulphide ores are concentrated by froth flotation, then roasted.
Exam Note: Mention froth flotation, roasting and the equation if asked.
Question 10. During extraction of metal, electrolytic refining is used to obtain pure metals. (i) Which material will be used as anode and cathode for refining of silver metal by this process? (ii) Suggest a suitable electrolyte also. (iii) In this electrolytic cell, where do we get pure silver after passing electric current?
Solution.
(i) Anode: Impure silver
Cathode: Pure silver
(ii) Electrolyte: Silver salt, such as AgNO3, AgCl, etc.
(iii) We get pure silver at cathode.
Teacher's Note: In electrolytic refining the impure metal is anode, the pure metal is cathode and a salt solution is electrolyte.
Exam Note: Fill all three: anode, cathode and electrolyte for silver.
Question 11. A metal that exists as a liquid at room temperature is obtained by heating its sulphide in the presence of air. Identify the metal and its ore and give the reaction involved.
Solution.
Metal low in activity series can be obtained by reducing their sulphides or oxides by heating. Mercury is the only metal that exists as liquid at room temperature. It can be obtained by heating cinnabar (HgS), the sulphide ore of mercury.
The reaction are as follows: 𝐻𝑒𝑎𝑡 2𝐻𝑔𝑂(𝑠) + 2𝑆𝑂2(𝑔) 2𝐻𝑔𝑆(𝑠) + 3𝑂2(𝑔) → 𝐻𝑒𝑎𝑡 2𝐻𝑔(𝑙) + 𝑂2(𝑔) 2𝐻𝑔𝑂(𝑠) →
Teacher's Note: A low-reactivity metal that is liquid is mercury, obtained by roasting its sulphide.
Exam Note: Name the metal, the ore and write the roasting reaction.
Question 12. How can a layer of aluminium oxide on an aluminium object be made thicker? What is this process called?
Solution.
Aluminium develops a thin oxide layer when exposed to air. This aluminium oxide coat makes it resistant to further corrosion. The resistance can be improved further by making the oxide layer thicker. This process is called anodising. During anodising, a clean aluminium article is made the anode and is electrolysed with dilute sulphuric acid. The oxygen gas evolved at the anode reacts with aluminium articles an attractive finish.
Teacher's Note: Anodising makes the natural aluminium oxide layer thicker by electrolysis, improving corrosion resistance.
Exam Note: Name the process anodising and mention electrolysis with dilute sulphuric acid.
Question 13. (i) A metal M is found in nature as MCO3. It is used in galvanising iron articles. Name the metal. (ii) How can the metal be obtained from its carbonate ore?
Solution.
(i) The metal is zinc (Zn).
(ii) The carbonate ore is first heated strongly in limited supply of oxygen and changed into its oxide. This process is called calcination. 𝐻𝑒𝑎𝑡 𝑍𝑛𝑂(𝑠) + 𝐶𝑂2(𝑔) 𝑍𝑛𝐶𝑂3(𝑠) →
Zinc oxide is then reduced to zinc metal by heating it with carbon. This process is called reduction. 𝐻𝑒𝑎𝑡 𝑍𝑛(𝑠) + 𝐶𝑂(𝑔) 𝑍𝑛𝑂(𝑠) + 𝐶(𝑠) →
Teacher's Note: The zinc ore is converted to oxide and then reduced to zinc.
Exam Note: Name zinc, then give calcination and reduction with carbon.
Question 14. Which two metals do not corrode easily? Give example in each case to support that (i) Corrosion of some metals is an advantage. (ii) Corrosion of some metals is a serious problem.
Solution.
Gold and platinum.
(i) A thin impervious layer aluminium oxide forms a protective layer which protects the aluminium metals underneath from further damage.
(ii) Corrosion of iron is a serious problem. Every year enormous amount of money is spent to replace damaged iron and steel structures.
Teacher's Note: Gold and platinum are noble metals; aluminium resists corrosion by forming a protective oxide layer.
Exam Note: Name the two metals and support each statement with the example asked.
Question 15. In the formation of the compound XY, atoms of X lost one electron each while atoms of Y gained one electron each. What is the nature of bond in XY? Predict the two properties of XY.
Solution.
The atoms of X electrons whereas the atoms of Y gain electrons. Thus, there is transfer of electrons from atoms of X to atoms of Y. The bond formed by the transfer of electrons is called ionic bond. Therefore, the nature of bond in the compound XY is ionic.
Properties of ionic compound XY:
(i) The compound will be soluble in water.
(ii) The compound will conduct electricity when dissolved in water or in molten state
Teacher's Note: Ionic bond formation involves electron transfer; X forms a positive ion and Y a negative ion.
Exam Note: State the transfer, ions formed and the electrostatic attraction in the compound.
Question 16. Explain how the properties of an alloy are different from those of constituent metals.
Solution.
(i) Alloys are stronger and harder than the constituent metals.
(ii) Alloys are more resistant to corrosion.
(iii) Alloys are more resistant to corrosion.
(iv) Alloys have lower electrical conductivity than pure metals.
Teacher's Note: Alloys are mixtures with improved properties like strength and resistance to corrosion.
Exam Note: List the differences in properties such as hardness, melting point and conductivity.
Question 17. Give the differences between electrolytic reduction and reduction with carbon.
Solution.
| Reduction with carbon | Electrolytic reduction |
|---|---|
| 1. Carbon is used as a reducing agent. | 1. Electrolysis process is used for reduction. |
| 2. Oxides of moderately reactive metals (e.g., Zn, Fe, Cu, Ni) are reduced by carbon. | 2. Oxides (and chlorides) of highly reactive metals (e.g., Al, Na, K, Mg, Ca) are reduced by this process. |
| 3. In this process, the metal oxide is mixed with carbon (Coke) and heated in a furnace. ZnO + C → Zn + CO | 3. In this process, molten metal oxide is electrolysed in an electrolytic cell where the cathode acts as a powerful reducing agent by supplying electrons to reduce metal ions into metal. Al³⁺ + 3e⁻ → Al (electrolytic reduction) |
Teacher's Note: Carbon reduces moderately reactive metal oxides; electrolysis reduces highly reactive ones.
Exam Note: Present as a two-column table.
Question 18. What is meant by refining of metals? Describe the electrolytic refining of copper with a neat labelled diagram.
Solution.
In electrolytic refining process, the impure metal is made as anode and a thin strip of pure metal is made as cathode. A solution of the metal salt is made as an electrolyte. On passing the current through the electrolyte, the pure metal from the anode dissolves into the electrolyte. An equivalent amount of pure metal from the electrolyte is deposited on the cathode. The soluble impurities go into the solution, whereas, the insoluble impurities settle down at the bottom of the anode and are known as anode mud.
At anode: Cu → Cu²⁺ + 2e⁻
At cathode: Cu²⁺ + 2e⁻ → Cu
Teacher's Note: Impure metal as anode, pure metal as cathode, salt solution as electrolyte.
Exam Note: Label anode, cathode, electrolyte and anode mud.
Question 19. State reason for the following: (i) Lemon is used for restoring the shine of tarnished copper vessels. (ii) A metal sulphide is converted into its oxide to extract the metal from the sulphide ore. (iii) Copper wires are used in electrical connections.
Solution.
(i) When copper vessels are exposed to moist air, they form a green coating of basic copper carbonate [CuCO₃.Cu(OH)₂].
The sour substance such as lemon or tamarind juice contain acids. Lemon juice contains citric acid and tamarind contain tartaric acid. These acids dissolve the coating of copper oxides or basic copper carbonate present on the surface of tarnished copper vessels and make them shining red-brown again.
(ii) It is easier to obtain a metal from its oxides as compared to its sulphides and carbonates. So, prior to reduction, metal carbonate and sulphides must be converted into metal oxides. A carbonate ore is converted into oxide by calcination whereas a sulphide ore is converted into oxide by roasting.
(iii) Copper wires are good conductor of electricity, so they are used in electrical connections.
Teacher's Note: Acids in lemon dissolve the coating; oxides are easier to reduce.
Exam Note: Give one reason for each part.
Free study material for Science
Xam Idea Solutions for Class 10 Mathematics: Xam Idea Solutions Class 10 Science Chapter 3 Metal And Non Metals Short Answer Type Questions II
Complete Math Solutions for Xam Idea Solutions Class 10 Science Chapter 3 Metal And Non Metals Short Answer Type Questions II
Access the complete chapter-wise PDF for Xam Idea Solutions Class 10 Science Chapter 3 Metal And Non Metals Short Answer Type Questions II. These structured Xam Idea Solutions solutions for Class 10 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Step-by-Step Mathematical Explanations
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Next Steps in Your Mathematics Revision
In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.