Download Class 10 Science Textbook Solutions: Chapter 03 Metal And Non Metals
Access comprehensive textbook solutions for Chapter 03 Metal And Non Metals using the reference material for Class 10 Science. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access Textbook Answers and Solutions
View or download the dedicated Chapter 03 Metal And Non Metals solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Science.
Long Answer Type Questions
Question 1. What are ionic or electrovalent compounds? Give an example of ionic compound. Explain with reason four properties of these compounds.
Solution.
Ionic compounds are those compounds which are formed by the transfer of electrons from a metal to a non-metal. For example, NaCl.
Properties:
(i) Physical nature: Ionic compounds are hard and solid due to strong force of attraction between oppositely charged ions.
(ii) Melting point and boiling point: As more amount of energy is required to break strong bonds. So, they have high melting points and boiling point.
(iii) Solubility: These are soluble in water (polar solvent) but insoluble in organic solvent.
(iv) Conduction of electricity: They conduct electricity in solution or molten state as ions move towards opposite electrodes.
Teacher's Note: Ionic compounds form by transfer of electrons, giving charged ions held by strong electrostatic forces that decide their properties.
Exam Note: Define, give NaCl as example, explain four properties with reasons.
Question 2. Two ores A and B were taken. On heating ore A gives CO2 whereas, ore B gives SO2. What steps will you take to convert them into metals?
Solution.
Since ore A gives CO2 and gives SO2. Therefore, ores are MCO3 and MS. As A is a carbonate ore, it is first subjected to calcination followed by reduction.
𝐶𝑎𝑙𝑐𝑖𝑛𝑎𝑡𝑖𝑜𝑛 𝑀𝑂 + 𝐶𝑂2 𝑀𝐶𝑂3 → 𝑅𝑒𝑑𝑢𝑐𝑡𝑖𝑜𝑛 𝑀 + 𝐶𝑂 𝑀𝑂 + 𝐶 →
As B is a sulphide ore, it is first subjected to roasting followed by reduction.
𝑅𝑜𝑎𝑠𝑡𝑖𝑛𝑔 2𝑀𝑂 + 2𝑆𝑂2 2𝑀𝑆 + 3𝑂2 → 𝑅𝑒𝑑𝑢𝑐𝑡𝑖𝑜𝑛 𝑀 + 𝐶𝑂 𝑀𝑂 + 𝐶 →
Teacher's Note: Carbonate and sulphide ores are converted to oxides by different processes before reduction.
Exam Note: Name calcination for the carbonate and roasting for the sulphide.
Question 3. (i) Hydrogen is not a metal but it has been assigned a place in the reactivity series of metals. Explain. (ii) How would you show that silver is chemically less reactive than copper?
Solution.
(i) Though hydrogen is not a metal but even then it has been assigned a place in the activity series. The reason is that like metals, hydrogen also has a tendency to lose electron and forms a positive ion H+. The metals which lose electrons less readily than hydrogen are placed below it and the metals which lose electrons more readily than hydrogen are placed above it in the reactivity series of metals.
(ii) By displacement reaction silver can be shown to be chemically less reactive than copper or copper is more reactive than silver. If a piece of silver is immersed in a solution of copper sulphate, no reaction will take place because silver is less reactive than copper and will not displace copper from the copper from the copper sulphate solution.
𝐶𝑢𝑆𝑂4(𝑎𝑞) + 𝐴𝑔(𝑠) → 𝑁𝑜 𝑟𝑒𝑎𝑐𝑡𝑖𝑜𝑛
On the other hand, if a copper plate is placed in a solution of silver nitrate, copper will slowly displace silver from the solution and blue solution of copper nitrate is formed.
(𝑎𝑞) + 2𝐴𝑔(𝑠) 2𝐴𝑔𝑁𝑂3(𝑎𝑞) + 𝐶𝑢(𝑠) → 𝐶𝑢(𝑁𝑂3) 𝐶𝑜𝑙𝑜𝑢𝑟𝑙𝑒𝑠𝑠 𝐵𝑙𝑢𝑒
This shows that copper is more reactive than silver.
Teacher's Note: Hydrogen is placed in the series because it can lose electrons like metals, helping compare reactivity.
Exam Note: Answer each part separately and give the reason clearly.
Question 4. (i) Distinguish between ionic and covalent compounds under the following properties: (a) Strength of forces between constituent elements (b) Solubility of compounds in water (c) Electrical conduction in substances (ii) Explain how the following metals are obtained from their compounds by the reduction process: (a) Metal M which is in the middle of the reactivity series (b) Metal N which is high up in the reactivity series Give one example of each type.
Solution.
(i) (a) Ionic compounds have strong force of attraction between the oppositely charged ions (e.g., Na+ and Cl-), so they are solids. Covalent compounds have weak force of attraction between their molecules, so they are usually liquids or gases.
(b) Ionic compounds are soluble in water but covalent compounds are insoluble in water
(c) lonic compounds conduct electricity when dissolved in water or when melted because they contain ions (charged particles). But, covalent compounds like glucose do not conduct electricity because they do not contain ions.
(ii) (a) The metal M which is in the middle of the reactivity series (such as iron, zinc, lead, copper, etc.) is moderately reactive. So, for obtaining such metals from their compounds, their sulphides and carbonates (in which they are present in nature) are first converted into their oxides by the process of roasting and calcination respectively. For example, 𝐻𝑒𝑎𝑡 2𝑍𝑛𝑂(𝑠) + 2𝑆𝑂2(𝑔) 2𝑍𝑛𝑆(𝑠) + 3𝑂2(𝑔) → 𝑍𝑖𝑛𝑐 𝑠𝑢𝑙𝑝ℎ𝑖𝑡𝑒 (𝑠𝑢𝑙𝑝ℎ𝑖𝑑𝑒 𝑜𝑟𝑒)
𝐻𝑒𝑎𝑡 𝑍𝑛𝑂(𝑠) + 𝐶𝑂2(𝑔) 𝑍𝑛𝐶𝑂3(𝑠) → 𝑍𝑖𝑛𝑐 𝑐𝑎𝑟𝑏𝑛𝑜𝑛𝑎𝑡𝑒(𝐶𝑎𝑟𝑏𝑜𝑛𝑎𝑡𝑒 𝑜𝑟𝑒)
The metal oxides (MO) are then reduced to the corresponding metals by using suitable reducing agents such as carbon. For example, zinc metal from its oxide is obtained as follow:
+ 𝐶𝑂(𝑔) 𝑍𝑛𝑂(𝑠) + 𝐶(𝑠) → 𝑍𝑛(𝑠) 𝑍𝑖𝑛𝑐 𝑍𝑖𝑛𝑐
(b) The metal N which is high up in the reactivity series (such as sodium, magnesium, calcium, aluminium, etc.), is very reactive and cannot be obtained from its compound by heating with carbon. Therefore, such metals are obtained by electrolytic reduction of their molten salt. For example, sodium is obtained by the electrolysis of molten sodium chloride (NaCl). At cathode: Na++ e- → Na 2Cl- → Cl2 + 2e- At anode:
Teacher's Note: Ionic and covalent compounds differ in force strength, melting and boiling points and conductivity.
Exam Note: Compare property by property, linking each to the type of bonding.
Question 5. (i) Distinguish between ‘roasting’ and ‘calcination’. Which of these two is used for sulphide ores and why? (ii) Write a chemical equation to illustrate the use of aluminium for joining cracked railway lines. (iii)Name the anode, the cathode and the electrolyte used in the electrolytic refining of impure copper.
Solution.
(i) Roasting: It is the process in which sulphide ores of the metals are converted into oxides by heating them in the presence of excess air. For example, Zinc sulphide is converted into zinc oxide by roasting.
𝐻𝑒𝑎𝑡 2𝑍𝑛𝑂(𝑠) + 2𝑆𝑂2(𝑔) 2𝑍𝑛𝑆(𝑠) + 3𝑂2(𝑔) → 𝑅𝑜𝑎𝑠𝑡𝑖𝑛𝑔
Calcination: It is the process in which carbonate ores of the metals are decomposed into oxides by heating them in the absence or limited air. For example zinc carbonate is decomposed into zinc and carbon dioxide by calcination.
𝐻𝑒𝑎𝑡 𝑍𝑛𝑂(𝑠) + 𝐶𝑂2(𝑔) 𝑍𝑛𝐶𝑂3(𝑠) → 𝐶𝑎𝑙𝑐𝑖𝑛𝑎𝑡𝑖𝑜𝑛
Out of roasting and calcination, only roasting is used for sulphide ores. This is because it is easier to obtain metal from its oxide as compared to its sulphide.
𝐻𝑒𝑎𝑡2𝐹𝑒(𝑙)
(ii) 𝐹𝑒2𝑂3(𝑠) + 𝐻𝑒𝑎𝑡 + 2𝐴𝑙(𝑠) → + 𝐴𝑙2𝑂3(𝑠) 𝐴𝑙𝑢𝑚𝑖𝑛𝑖𝑢𝑚 𝐴𝑙𝑢𝑚𝑖𝑛𝑖𝑢𝑚 𝐼𝑟𝑜𝑛(𝐼𝐼𝐼) 𝑂𝑥𝑖𝑑𝑒 𝐼𝑟𝑜𝑛 𝑚𝑒𝑡𝑎𝑙 𝑝𝑜𝑤𝑑𝑒𝑟 𝑜𝑥𝑖𝑑𝑒
(iii) Anode − Impure copper Cathode − Strip of pure copper Electrolyte – Acidified copper sulphate solution.
Teacher's Note: Roasting heats sulphide ores in air, while calcination heats carbonate ores in limited air.
Exam Note: Distinguish both with equations; roasting suits sulphide ores.
Question 6. Write about different chemical processes used for obtaining a metal from its oxides, for metals low in the reactivity series, metals in the middle of reactivity series and metals towards the top of the reactivity series.
Solution.
(i) For obtaining the metals that are low in the reactivity series, oxides of such metals can be reduced to metals by simply heating them in the air. For example, HgS or cinnabar is the ore of mercury metal which on heating changes to HgO. This metal oxide (HgO) gets reduced to mercury metal (Hg) on further heating.
𝐻𝑒𝑎𝑡 2𝐻𝑔𝑂 + 2𝑆𝑂2 ↑ 2𝐻𝑔𝑆 + 3𝑂2 → (𝑅𝑜𝑎𝑠𝑡𝑖𝑛𝑔) (𝑎𝑖𝑟)
𝐻𝑒𝑎𝑡 + 𝑂2 ↑ 2𝐻𝑔𝑂 → 2𝐻𝑔 𝑀𝑒𝑟𝑐𝑢𝑟𝑦 𝑚𝑒𝑡𝑎𝑙
(ii) For obtaining metals that are in the middle of reactivity series, oxides of such metals can be reduced with coke (carbon) which acts as a reducing agent. For example, iron (III) oxide can be reduced to iron, as follows: 𝐻𝑒𝑎𝑡4𝐹𝑒 𝑀𝑒𝑡𝑎𝑙 + 3𝐶𝑂2 ↑ 2𝐹𝑒2𝑂3 + 3𝐶 (𝐶𝑜𝑘𝑒) →
(iii) For obtaining metals that are high up in the reactivity series, their oxides are reduced to metals by electrolysis. For example, 𝐶𝑢𝑟𝑟𝑒𝑛𝑡 4𝐴𝑙3+ + 6(𝑂)2− 2𝐴𝑙2𝑂3 → (𝐵𝑎𝑢𝑥𝑖𝑡𝑒 𝑜𝑟𝑒)
At cathode: 4𝐴𝑙3+ + 12𝑒− → (𝑀𝑒𝑡𝑎𝑙) 4𝐴𝑙
6(𝑂)2− → 3𝑂2 + 12𝑒− At anode:
Teacher's Note: Low-reactivity metals need only heat, middle ones need carbon, and highly reactive ones need electrolysis.
Exam Note: Cover the three reactivity groups with examples and equations.
Question 7. Write the names and symbols of two most reactive metals. Explain by drawing electronic structure how any one of them reacts with a halogen. Explain any two physical properties of the compound formed.
Solution.
Most reactive metals are Na (sodium) and K (potassium).
Na → Na⁺ + e⁻ and Cl + e⁻ → Cl⁻
Physical Properties:
(i) Physical nature: Hard and solid due to strong attractive forces between oppositely charged ions.
(ii) High melting points and boiling points because more amount of energy is required to break strong force of attraction.
Teacher's Note: Sodium gives one electron to chlorine forming NaCl.
Exam Note: Draw the transfer and give two properties.
Question 8. (i) What is an ionic bond? (ii) How is an ionic bond formed? (iii) Write the formation of magnesium chloride.
Solution.
(i) The chemical bond formed by the transfer of electrons from one atom to another is known as an ionic bond.
(ii) An ionic bond is formed when one of the atoms can donate electrons to achieve the inert gas electronic configuration and other atom needs electrons to achieve the inert gas electronic configuration.
When a metal (usually 1, 2 or 3 electrons in outermost shell) reacts with a non-metal (usually 5, 6 or 7 electrons in outermost shell), transfer of electrons takes place from metal atoms to the non-metal atoms and an ionic bond is formed. There is a strong force of electrostatic attraction between metallic cation and non-metallic anion which is responsible for the formation of ionic bond.
(iii) Formation of magnesium chloride (MgCl₂): The atomic number of magnesium is 12. It has two electrons in its valence shell as shown below: Mg – 2, 8, 2
Magnesium, therefore, has a tendency to lose the 2 valence electrons and in the process attains the electronic configuration of neon. Mg → Mg²⁺ + 2e⁻ (2,8,2 → 2,8)
Chlorine (atomic number 17) has 7 electrons in the valence shell. It has a tendency to gain one electron to complete its octet. Cl + e⁻ → Cl⁻ (2,8,7 → 2,8,8)
Thus, when magnesium and chlorine are brought together, the magnesium atom transfers its two valence electrons to two chlorine atoms. In the process, both the atoms acquire the stable electronic configuration of nearest inert gases. The positively charged magnesium ion Mg²⁺ and negatively charged chloride ions (Cl⁻) are now held together by the electrostatic force of attraction and form ionic bond. Mg²⁺ + 2Cl⁻ → Mg²⁺(Cl⁻)₂ or MgCl₂
This process can also be shown as below:
Teacher's Note: Electron transfer from metal to non-metal forms an ionic bond.
Exam Note: Show Mg losing two electrons to two Cl.
Question 9. (i) How do you classify elements into metals and non-metals on the basis of their electronic configuration? Choose metal and non-metal out of the following: A (Z = 11, mass 23), B (Z = 9, mass 19), C (Z = 12, mass 24), D (Z = 15, mass 31), E (Z = 17, mass 35). (ii) What type of bond will be formed if (a) ‘A’ combines with ‘B’? (b) ‘A’ combines with ‘E’? (c) ‘C’ combines with ‘E’? (d) ‘D’ combines with ‘E’?
Solution.
(i) Elements which contain 1 to 3 electrons in their outermost shell are metals. Elements containing 4 to 7 electrons in their valence shell are non-metals.
Electronic configurations:
| Element | Electronic configuration |
|---|---|
| A (Z = 11) | 2, 8, 1 |
| B (Z = 9) | 2, 7 |
| C (Z = 12) | 2, 8, 2 |
| D (Z = 15) | 2, 8, 5 |
| E (Z = 17) | 2, 8, 7 |
Hence A and C are metals whereas, B, D and E are non-metals.
(ii) Type of bonds
(a) ‘A’ is metal and ‘B’ is non-metal, so the bond formed will be ionic. A = 2, 8, 1; B = 2, 7
(b) ‘A’ is metal and ‘E’ is non-metal, so the bond formed is ionic. A = 2, 8, 1; E = 2, 8, 7
(c) ‘C’ is metal and ‘E’ is non-metal, so the bond formed is ionic. C = 2, 8, 2; E = 2, 8, 7
(d) ‘D’ is a non-metal and E is also a non-metal, so the bond formed will be covalent. D = 2, 8, 5; E = 2, 8, 7
Teacher's Note: Metals have 1 to 3 valence electrons; metal plus non-metal gives ionic bond.
Exam Note: Write configurations before naming bond types.
Free study material for Science
Download Xam Idea Solutions for Class 10 Math PDF
Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 10 Science Chapter 3 Metal And Non Metals Long Answer Type Questions
Explore reliable mathematical solutions for Xam Idea Solutions Class 10 Science Chapter 3 Metal And Non Metals Long Answer Type Questions tailored for Class 10 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Detailed Calculation Guides for Class 10
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Explore More Study Resources for Class 10 Math
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.