Xam Idea Solutions Class 10 Science Chapter 13 Magnetic Effects Of Electric Current Short Answer Type Questions I

Official Textbook Solutions: Class 10 Science Chapter 13 Magnetic Effects Of Electric Current

Review structured textbook solutions for Class 10 Science Chapter 13 Magnetic Effects Of Electric Current prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Science: Chapter 13 Magnetic Effects Of Electric Current

Navigate directly to the solved Science textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Short Answer Type Questions I

Question 1. The given magnet is divided into three parts A, B and C. A B Name the parts where the strength of the magnetic field is: (𝐢) maximum (𝐢𝐢) minimum How will density of magnetic field lines differ at these parts.

Solution.

(i) Maximum magnetic field is in the region A and C.

(ii) Minimum magnetic field is in the region B.

Reason: A and C are magnetic poles and have maximum number of magnetic field lines which determine the intensity of magnetic field while B is centre of the magnet has no magnetic field lines. So intensity of magnetic field near B is almost zero.

Teacher's Note: The magnetic field is strongest at the poles of a magnet and weakest in the middle region.

Exam Note: Strongest at poles, weakest at the centre.

Question 2. What is electromagnetic induction?

Solution.

Whenever the magnetic flux linked with a circuit changes, an induced e.m.f. (electromotive force) and hence induced current is produced in the circuit. This phenomenon is known as electromagnetic induction and is used to generate electric current in a generator or a dynamo.

Teacher's Note: Electromagnetic induction produces induced emf and current whenever the magnetic flux linked with a circuit changes.

Exam Note: Changing flux produces induced emf.

Question 3. Write SI unit of magnetic field. Under what condition does a moving charge experience (𝐢) maximum force (ii) minimum force?

Solution.

The SI unit of magnetic field is tesla.

(𝐢) Maximum force: When the velocity of charge and the magnetic field are perpendicular to each other.

(𝐢𝐢) Minimum force: When this charge is moving in the direction of the magnetic field.

Teacher's Note: Magnetic field is measured in tesla, with maximum force when motion is perpendicular to the field and minimum when parallel.

Exam Note: Perpendicular gives maximum force; parallel gives none.

Question 4. A magnetic compass shows a deflection when placed near a current-carrying wire. How will the deflection of the compass get affected if the current in the wire is increased? Support your answer with a reason.

Solution.

In the current in the wire is increased, the deflection increases. The strength of magnetic field is directly proportional to the magnitude of current passing through the straight conductor.

Teacher's Note: Increasing the current strengthens the magnetic field, so the compass deflection increases.

Exam Note: Field strength is proportional to current.

Question 5. What does the divergence of magnetic field lines near the ends of a current-carrying straight solenoid indicate?

Solution.

The divergence, that is, the falling degree of closeness of magnetic field lines indicates the fall in strength of magnetic field near and beyond the ends of the solenoid.

Teacher's Note: Diverging field lines near the ends of a solenoid indicate that the field becomes weaker there.

Exam Note: Fewer closer lines mean weaker field.

Question 6. A student performs an experiment to study the magnetic effect of current around a current carrying straight conductor with the help of a magnetic compass. He reports that (𝐢) the degree of deflection of the magnetic compass increases when the compass is moved away from the conductor. (ii) the degree of deflection of the magnetic compass increases when the current through the conductor is increased. Which of the above observations of the student appears to be wrong and why?

Solution.

The first observation is wrong. Because as the distance from the conductor increases, the strength of the magnetic field will decrease. So the degree of deflection of the compass should decrease instead of increasing.

Teacher's Note: The student's first observation is wrong because the field weakens with distance, so the compass deflection must decrease.

Exam Note: Field falls with distance.

Question 7. How does the strength of the Magnetic field at the centre of a circular coil of a wire depend on: (a) radius of the coil (b) number of turns in the coil.

Solution.

(a) More the radius weaker the field.

(b) Field strength is directly proportional to the number of turns in the coil.

Teacher's Note: A larger coil radius weakens the field at the centre, while more turns strengthen it.

Exam Note: Field depends on radius and number of turns.

Question 8. (𝐢) How is the direction of magnetic field at a point determined? (𝐢𝐢) What is the direction of magnetic field at the centre of a current- carrying circular loop?

Solution.

(𝐢) The direction of the magnetic field at a point can be found by placing a small magnetic compass at that point. The north end of the needle of a compass indicates the direction of magnetic field at a point where it is placed.

(𝐢𝐢) The direction of magnetic field at the centre of a current-carrying circular loop is perpendicular to the plane of the loop.

Teacher's Note: A small compass placed at the point shows the field direction, with its north end pointing along the field.

Exam Note: Use a compass to find direction.

Question 9. AB is a current-carrying conductor in the plane of the paper as shown in figure. What are the directions of magnetic fields produced by it at points P and Q? Given r1 > r2, where will the strength of the magnetic field be larger?

ABQPr₂r₁

Solution.

Magnetic field at P is into the plane of paper and at Q it is out of the plane of paper. The strength of the magnetic field at Q will be larger as strength of the field ∝ 1/r.

Teacher's Note: Field strength falls with distance from the wire; Q is nearer. Direction follows the right-hand thumb rule.

Exam Note: Q stronger, since field varies as 1/r.

Question 10. What is an electromagnet? Draw a circuit diagram to show how a soft iron piece can be transformed into an electromagnet.

soft iron core + coilbatterykey K

Solution.

The magnetic field produced due to current flowing in a coil or a solenoid can be used to magnetise a material like soft iron temporarily. The insulated copper wire is wrapped on a soft iron piece. When current is passed through the coil using a battery and a key, the iron piece behaves like a bar magnet as long as current is being passed. Such a magnet is called an electromagnet.

Teacher's Note: Soft iron loses its magnetism when the current stops, so the magnet is temporary.

Exam Note: Soft iron core in a current-carrying coil.

Question 11. Identify the poles of the magnet in the figure (a) and (b) shown below.

NS(a)NS(b)

Solution.

The magnetic field lines emerge from north pole and merge at the south pole. In (a) the lines leave the left end and enter the right end, so the left end is the north pole and the right end is the south pole. In (b) the lines in the gap run from the left magnet to the right magnet, so the end of the left magnet facing the gap is the north pole and the end of the right magnet facing the gap is the south pole.

Teacher's Note: Outside a magnet, field lines run from north to south, so arrows leaving an end mark its north pole.

Exam Note: Lines leave north pole, enter south pole.

Download Xam Idea Solutions for Class 10 Math PDF

Download Xam Idea Solutions for Class 10

Review detailed solutions for Class 10 Mathematics. The Xam Idea Solutions Class 10 Science Chapter 13 Magnetic Effects Of Electric Current Short Answer Type Questions I PDF provides comprehensive answers mapped to standard Xam Idea Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your Class 10 Exam Preparation

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 10 Science?

They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 10 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 10 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 10 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 10 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.