Xam Idea Solutions Class 10 Science Chapter 13 Magnetic Effects Of Electric Current Short Answer Type Questions II

Step-by-Step Solutions for Class 10 Science Chapter 13 Magnetic Effects Of Electric Current

Access comprehensive textbook solutions for Chapter 13 Magnetic Effects Of Electric Current using the reference material for Class 10 Science. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 13 Magnetic Effects Of Electric Current Textbook Solutions PDF

Navigate directly to the solved Science textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Short Answer Type Questions II

Question 1. What is the difference between a direct current and an alternating current? How many times does AC used in India change direction in one second?

Solution.

Direct current always flows in one direction but the alternating current reverses its direction periodically. Also the magnitude of current in case of DC is same throughout whereas in case of AC, it changes continuously. The frequency of AC in India is 50 Hz and in each cycle it alters direction twice. Therefore, AC changes direction 2 x 50 = 100 times in one second.

Teacher's Note: DC flows in one direction while AC reverses periodically, and in India AC reverses direction many times each second.

Exam Note: AC reverses direction twice per cycle.

Question 2. How can the magnitude of the induced current be increased?

Solution.

The magnitude of the induced current can be increased by:

(i) Taking the conductor in the form of a coil of many turns of insulated wire.

(ii) Increasing the strength of the magnetic field used.

(iii) Increasing the rate of change of magnetic flux associated with the coil.

Teacher's Note: Induced current can be increased by using a coil with more turns, a stronger magnet or faster relative motion.

Exam Note: More turns, stronger magnet, faster motion.

Question 3. What is the role of fuse used in series with any electrical appliance? Why should a fuse with defined rating not be replaced by one with a larger rating?

Solution.

Fuse is used for protecting appliances due to short-circuiting or overloading. The fuse is rated for a certain maximum current and blows off when a current more than the rated value flows through it. If a fuse is replaced by one with larger ratings, the appliances may get damaged while the protecting fuse does not burn off. This practice of using fuse of improper rating should always be avoided.

Teacher's Note: A fuse protects appliances from short circuits and overloading by melting when the current exceeds its rated value.

Exam Note: Fuse of correct rating protects appliances.

Question 4. Answer the following questions: (𝐢) What is the direction of magnetic field lines outside a bar-magnet? (𝐢𝐢) The magnetic field lines in a given region are getting crowded. What does it indicate? (𝐢𝐢𝐢) State one advantage of AC over DC.

Solution.

(i) North pole to south pole.

(ii) The strength of magnetic field is higher in this region.

(iii) A.C. voltage can be stepped up and transmitted over long distances without much loss of energy.

Teacher's Note: Field lines outside a bar magnet run from north to south, and AC can be stepped up for transmission.

Exam Note: Lines go north to south outside the magnet.

Question 5. What are magnetic field lines? How is the direction of a magnetic field at a point determined? Mention two important properties of magnetic field lines.

Solution.

The magnetic field lines of force are the lines drawn in a magnetic field along which a hypothetical north magnetic pole would move if it is free to do so. The direction of a magnetic field at a point is the direction of the resultant force acting on a hypothetical north pole placed at that point. The tangent at any point on the magnetic field line gives the direction of magnetic field at that point. The direction of the magnetic field at a point can be found by placing a small magnetic compass at that point. The north end of the needle indicates the direction of the field.

Two important properties of the magnetic lines of force are:

(i) The magnetic lines of force start from north pole and terminate at south pole. Inside the magnet they travel from south pole to north pole. Thus, they are closed curves.

(ii) They do not intersect each other because at the point of intersection there will be two directions of same magnetic field which is impossible.

Teacher's Note: Field lines show how a magnetic field acts in a region, and the compass shows their direction at a point.

Exam Note: Lines show direction and strength of the field.

Question 6. A copper coil is connected to a galvanometer. What would happen if a bar magnet is (𝐢) pushed into the coil with its north pole entering first (𝐢𝐢) held at rest inside the coil (𝐢𝐢𝐢) pulled out again?

Solution.

(𝐢) When north pole is pushed into the coil, a momentary deflection is observed in the galvanometer. This deflection indicates that a momentary current is produced in the coil. The direction of current in the coil is anticlockwise.

(ii) When the magnet is held at rest, there is no deflection in the galvanometer. It indicates that no current is produced in the coil in this use.

(iii) In pulling the magnet out of the coil, a deflection in opposite direction is observed. It indicates that the current produced in the coil is in opposite direction.

Teacher's Note: Moving a magnet into or out of a coil changes the flux, causing a momentary current and galvanometer deflection.

Exam Note: Relative motion between magnet and coil causes deflection.

Question 7. Explain what is short circuiting and overloading in an electric supply.

Solution.

Short circuiting: Whenever live and neutral wires come in contact with each other, the incident is called short circuiting. In this case, resistance of a circuit decreases to a very small value. The decreasing of resistance increases the current. Due to this increased current, the wires get heated. This extreme heat may cause fire in the building.

Overloading: Every supply has a capacity to bear a maximum load, i.e., the power that can be supplied has a limit. Sometimes, the number of appliances which are switched on at the same time have power more than the capacity of the line. This is called overloading. In this situation, wires of the supply get heated due to extremely large current flowing through them and the circuit may catch fire. To avoid this fire, we use an electric fuse in the circuit.

Teacher's Note: Short circuiting occurs when live and neutral wires touch, while overloading happens when too many appliances draw current at once.

Exam Note: Both cause excess current.

Question 8. What change in the deflection of the compass needle placed at a point near current carrying straight conductor shall be observed if the (a) current through the conductor is increased? (b) direction of current in the conductor is reversed? (c) compass is moved away from the conductor?

Solution.

(a) Deflection increases.

(b) Direction of deflection is reversed.

(c) Deflection decreases.

Teacher's Note: Compass deflection grows with stronger current, reverses with reversed current and weakens with greater distance.

Exam Note: Deflection follows current strength and distance.

Question 9. A coil made of insulated copper wire is connected to a galvanometer. What will happen to the deflection of the galvanometer if this coil is moved towards a stationary bar magnet and then moved away from it? Give reason for your answer and name the phenomenon involved.

Solution.

When coil is moved towards a stationary magnet, the magnetic field associated with the coil will change and so current will be induced in the coil. This causes galvanometer to show deflection in one direction. Now when coil is moved away, the magnetic field will decrease and so current induces in the opposite direction causing galvanometer to show deflection in opposite direction. The phenomenon is electromagnetic induction.

Teacher's Note: Moving the coil relative to a magnet changes the magnetic flux, so a current is induced and the galvanometer deflects.

Exam Note: Relative motion produces induced current.

Question 10. In what respect does the construction of an AC generator differ from that of a DC generator?

Solution.

The only difference between a DC generator and an AC generator is in the way the two ends of the generator coil are connected to the outer circuit. In a DC generator, the two ends of the generator coil are connected to a split ring type commutator consisting of two half rings of copper. In an AC generator, the ends of the coil are connected to two full rings of copper called slip rings. There is no commutator in an AC generator.

Teacher's Note: Moving the coil relative to a magnet changes the flux, so a current is induced and the galvanometer deflects.

Exam Note: Slip rings for AC; split ring for DC.

Question 11. Magnetic field lines are shown in the given diagram. A student makes a statement that magnetic field at X is stronger than at Y. Justify this statement. Also redraw the diagram and mark the direction of magnetic field lines.

NSXY

Solution.

The relative strength of the magnetic field is shown by the degree of closeness of the field lines. The degree of closeness is more at X than at Y. Therefore, the field is stronger at X where the field lines are crowded.

The diagram is redrawn below with the direction of the field lines marked, from the north pole to the south pole outside the magnet.

NSXY

Teacher's Note: Crowded field lines mean a stronger field; outside a magnet they run from north to south.

Exam Note: Closer lines mean stronger field; arrows from N to S.

Question 12. Name and state the rule used for determination of direction of induced current produced in a conductor due to a changing magnetic field and give one practical application of this phenomenon in everyday life.

Solution.

Rule: Fleming's right-hand rule.

It states that if we stretch the thumb, forefinger and middle finger of our right hand such that they are mutually perpendicular to each other, and the forefinger indicates the direction of magnetic field and the thumb shows the direction of motion of conductor, then the middle finger will show the direction of induced current.

Application: Electrical generator.

Teacher's Note: Fleming's right-hand rule gives induced current direction when a conductor moves in a field; generators use it.

Exam Note: Name rule, state fingers, give generator.

Step-by-Step Xam Idea Solutions for Class 10 Math

Access Class 10 Mathematics Solutions

Access the complete chapter-wise PDF for Xam Idea Solutions Class 10 Science Chapter 13 Magnetic Effects Of Electric Current Short Answer Type Questions II. These structured Xam Idea Solutions solutions for Class 10 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Mastering Core Concepts with Xam Idea Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for Class 10 Math

In addition to these Xam Idea Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 10 Science?

They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 10 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 10 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 10 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 10 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.