Download Class 10 Science Textbook Solutions: Chapter 12 Electricity
Review structured textbook solutions for Class 10 Science Chapter 12 Electricity prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Access Textbook Answers and Solutions
View or download the dedicated Chapter 12 Electricity solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Science.
Short Answer Type Questions I
Question 1. Why does resistance of a metallic conductor increase with increase in temperature?
Solution.
When a metallic conductor is heated, the atoms in the metal vibrate with greater amplitude and frequency. Due to increase in temperature, the thermal velocities of free electrons also increases. Therefore, the number of collisions between free electrons and atoms increases. This increases the opposition to the movement of electrons and hence the resistance of the conductor.
Teacher's Note: Heating makes metal atoms vibrate more, which obstructs electron flow and raises resistance.
Exam Note: Link vibration to more collisions.
Question 2. Why is it not advisable to handle high voltage electrical circuit with wet hands?
Solution.
The resistance of dry-skin human body is about 50,000 𝛺. When the skin is wet, the resistance gets lowered to about 10,000 𝛺. If a person with wet hands touches the electrical circuit, high current will flow through the body causing risk to life.
Teacher's Note: Wet skin has much lower resistance, so a dangerous current can flow through the body.
Exam Note: Link wet skin with low resistance.
Question 3. Though the same current flows through line wires or the filament of a bulb, yet only the latter glows. Why?
Solution.
The filament of electric lamp has high resistance whereas the line wires are of negligible resistance. Since amount of heat generated is proportional to the resistance, the filament generates much more heat and it starts glowing.
Teacher's Note: The filament's high resistance makes it heat up and glow, while line wires, with negligible resistance, stay cool.
Exam Note: Heat produced depends on resistance at equal current.
Question 4. Heat is generated continuously in an electric heater but the temperature of its element becomes constant after some time. Why?
Solution.
When the temperature of the heater becomes greater than the temperature of the surrounding, some of the heat is lost to the surroundings in the form of thermal radiations. After some time, rate at which heat is being produced becomes equal to the rate of which heat is lost. Hence, the temperature of the element becomes constant.
Teacher's Note: Temperature stays steady once heat lost to the surroundings equals heat produced in the element.
Exam Note: Steady temperature means heat gained equals heat lost.
Question 5. In the given circuit diagram, two resistance wires A and B are of same area of cross-section and same material, but A is longer than B. Which ammeter A1 or A2 will indicate higher reading for current? Give reason.
Solution.
Ammeter A2 shows the higher reading. Since wire A is longer, it has greater resistance and so draws less current. So more current flows through B and A2 shows the higher reading.
Teacher's Note: Wires in parallel share the same voltage; the shorter wire B has less resistance and draws more current.
Exam Note: Shorter wire, lower resistance, more current.
Question 6. Two wires of equal length, one of copper and the other of manganin (an alloy) have the same thickness. Which one can be used for (i) electrical transmission lines (ii) electrical heating devices? Why?
Solution.
(i) Copper wire can be used for electrical transmission lines because copper has very low resistivity and hence it is very good conductor of electricity.
(ii) Manganin can be used for electrical heating devices because the resistivity of manganin is about 25 times more than that of copper and hence it produces a lot of heat on passage of current through it.
Teacher's Note: Copper suits transmission lines for its low resistivity, whereas manganin suits heating devices because its high resistivity produces much heat.
Exam Note: Low resistivity for lines; high resistivity for heaters.
Question 7. A student has drawn the electric circuit to study Ohm's law as shown in figure. His teacher told that the circuit diagram needs correction. Study the circuit diagram and redraw it after making all corrections.
Solution.
Given circuit (incorrect): the ammeter is connected in parallel with the resistor and the voltmeter in series, and the polarities are not marked.
Corrected circuit: the ammeter is connected in series with the resistor R, the voltmeter is connected in parallel across R, and the + terminals of the meters are towards the positive terminal of the battery.
Teacher's Note: Ammeter goes in series, voltmeter in parallel across the resistor, and current must enter each meter at +.
Exam Note: Ammeter series, voltmeter parallel, correct polarity.
Question 8. What is electrical resistivity? In a series electrical circuit comprising of a resistor having a metallic wire, the ammeter reads 5 A. The reading of the ammeter decreases to half when the length of the wire is doubled. Why?
Solution.
The resistivity of a material is defined as the resistance of a conductor made of that material of unit length and unit cross-sectional area.
Using R = ρl/A and V = RI: when the length is doubled, R is doubled while V remains unchanged. Hence, the current becomes half.
Teacher's Note: Resistivity is the resistance of a conductor of unit length and unit cross-section, and it depends on material and temperature.
Exam Note: Resistivity depends on the material, not the dimensions.
Free study material for Science
Class 10 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 10 Science Chapter 12 Electricity Short Answer Type Questions I
Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 10 Science Chapter 12 Electricity Short Answer Type Questions I
Access the complete chapter-wise PDF for Xam Idea Solutions Class 10 Science Chapter 12 Electricity Short Answer Type Questions I. These structured Xam Idea Solutions solutions for Class 10 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Concept-Driven Math Answers
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Complete Your Class 10 Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.