Solutions for Class 10 Science: Chapter 12 Electricity
Access comprehensive textbook solutions for Chapter 12 Electricity using the reference material for Class 10 Science. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Practice Class 10 Science Solutions: Chapter 12 Electricity
Navigate directly to the solved Science textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Short Answer Type Questions II
Question 1. Why does an electric bulb become dim when an electric heater in parallel circuit is switched on? Why does dimness decrease after sometime?
Solution.
The resistance of a heater coil is less than that of electric bulb filament. When heater is switched on in parallel, more current start flowing through the heater coil and current through the bulb filament decreases making it dim. After some time, when heater coil becomes hot its resistance increases. As a result, current through the heater coil decreases and the current through the bulb filament increases and thus dimness of the bulb decreases.
Teacher's Note: A bulb dims when a heater joins in parallel because the heavy extra current drops the supply voltage slightly.
Exam Note: Parallel heater draws more current, reducing the bulb's voltage.
Question 2. A metallic wire of resistance R is cut into ten parts of equal length. Two pieces each are joined in series and then five such combinations are joined in parallel. What will be the effective resistance of the combination?
Solution.
The resistance of a conductor is directly proportional to its length. When the wire of resistance R is cut into ten parts of equal length, the resistance of each part is r = R/10.
Two such pieces joined in series have resistance 2r = 2R/10 = R/5.
Five such combinations are connected in parallel, so 1/R′ = 5/(R/5) = 25/R.
Hence R′ = R/25.
Teacher's Note: Resistance is proportional to length, so combine the equal pieces in series, then parallel.
Exam Note: Use series then parallel rules.
Question 3. A wire of length L and resistance R is stretched so that its length is doubled and the area of cross-section is halved. How will its: (a) resistance change? (b) resistivity change? Justify your answer in each case.
Solution.
(a) A wire of length l and area of cross-section A becomes a wire of length 2l and area of cross-section A/2.
Using R = ρl/A, the new resistance is R1 = ρ(2l)/(A/2) = 4ρl/A = 4R, i.e., the resistance becomes four times.
(b) Resistivity of a substance does not depend on its length or area of cross-section. It depends on the nature of the material and temperature. Hence there is no change.
Teacher's Note: Stretching the wire changes length and area but not the material, so resistance changes while resistivity stays fixed.
Exam Note: Resistivity is a property of the material.
Question 4. (a) The components of an electric circuit are 0.5 m long nichrome wire XY, an ammeter, a voltmeter, four cells of 1.5 V each, rheostat and a plug key. Draw a circuit diagram to study the relation between potential difference across the terminals X and Y of the wire and current flowing through it.
(b) State the law that relates potential difference across a conductor with the current flowing through it.
Solution.
(a) The circuit diagram is shown below.
(b) Ohm's law states that the current through a conductor between two points is directly proportional to the potential difference across the two points, provided the temperature remains the same.
Teacher's Note: Draw the loop with a battery, key, rheostat and ammeter in series with the wire, and a voltmeter across it.
Exam Note: Voltmeter in parallel; ammeter in series.
Question 5. Draw a circuit diagram of an electric circuit containing a cell, a key, an ammeter, a resistor of 2 Ω in series with a combination of two resistors (4 Ω each) in parallel and a voltmeter across the parallel combination. Will the potential difference across the 2 Ω resistor be the same as that across the parallel combination of 4 Ω resistors? Give reason.
Solution.
The circuit is shown below.
Effective resistance of the two 4 Ω resistors in parallel: Req = (4 × 4)/(4 + 4) = 2 Ω.
Since the 2 Ω resistor and the parallel combination of two 4 Ω resistors are in series, the same current flows through both. Hence the potential difference across the 2 Ω resistor is the same as that across the combination of the two resistors (because the resistances are equal, 2 Ω each).
Teacher's Note: The 2 ohm resistor and the parallel pair are in series, so they carry the same current.
Exam Note: Same current, equal resistance, equal potential difference.
Question 6. Three incandescent bulbs of 100 W each are connected in series in an electrical circuit. In another circuit another set of three bulbs of the same wattage are connected in parallel to the same source. (a) Will the bulb in the two circuits glow with the same brightness? Justify your answer. (b) Now let one bulb in both the circuits get fused. Will the rest of the bulbs continue to glow in each circuit? Give reason.
Solution.
(a) No.
Reasons: Let R be the resistance of each bulb, then total resistance in series = 3R In series, current in each bulb is same.
So current drawn by each bulb connected in series is one-third as compared to the current in each bulb in parallel arrangement, so the bulbs connected in parallel combination glow more brightly.
(b) In series arrangement, if one bulb is fused; then current in the bulbs connected in series will become zero, so bulbs will stop glowing. In parallel arrangement, if one bulb is fused, the other two bulbs will continue to glow with same brightness.
Teacher's Note: Series and parallel bulbs do not shine equally, and a fused bulb affects the two arrangements differently.
Exam Note: Series stops completely; parallel bulbs keep working.
Question 7. What would be the reading of ammeter and voltmeter in the given circuit?
Solution.
R = R1 + R2 = 1 + 2 = 3 Ω
I = V/R = 3/3 = 1 A
Ammeter reading = 1 A
Voltmeter reading (across the 2 Ω resistor) = IR = 1 × 2 = 2 V
Teacher's Note: The 1 Ω and 2 Ω resistors are in series; the voltmeter reads the drop across the 2 Ω resistor.
Exam Note: I = 1 A; V = 2 V.
Question 8. Read the following information:
(i) Resistivity of copper is lower than that of aluminium which, in turn, is lower than that of constantan.
(ii) Six wires labelled as A, B, C, D, E, F have been designed as per the following parameters:
| Wire | Length | Diameter | Material | Resistance |
|---|---|---|---|---|
| A | l | 2d | Aluminium | R1 |
| B | 2l | d/2 | Constantan | R2 |
| C | 3l | d/2 | Constantan | R3 |
| D | l/2 | 3d | Copper | R4 |
| E | 2l | 2d | Aluminium | R5 |
| F | l/2 | 4d | Copper | R6 |
Answer the following question using the above data: (a) Which of the wires has maximum resistance and why? (b) Which of the wires has minimum resistance and why? (c) Arrange R1, R3 and R5 in ascending order of their values. Justify your answer.
Solution.
(a) Wire C has maximum resistance because it has maximum length, least thickness and highest resistivity.
(b) Wire F has the minimum resistance since it has least length, maximum thickness and least resistivity (using R = ρl/A).
(c) R1 < R5 < R3, i.e., R3 > R5 > R1 (using R = ρl/A, with A proportional to d²). R5 = 2R1, as wires A and E have the same material and diameter but E is twice as long. R3 is much larger than R1: wire C is three times as long, its cross-section is 1/16 that of A, and constantan has a higher resistivity than aluminium.
Teacher's Note: Resistance rises with length and resistivity and falls with thickness, which identifies the wires with highest and lowest resistance.
Exam Note: Use the resistance formula to compare wires.
Free study material for Science
Class 10 Mathematics: Xam Idea Solutions for Xam Idea Solutions Class 10 Science Chapter 12 Electricity Short Answer Type Questions II
Chapter-wise Xam Idea Solutions: Xam Idea Solutions Class 10 Science Chapter 12 Electricity Short Answer Type Questions II
Explore reliable mathematical solutions for Xam Idea Solutions Class 10 Science Chapter 12 Electricity Short Answer Type Questions II tailored for Class 10 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Step-by-Step Mathematical Explanations
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Additional Study Materials for 2026
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.