Together With Solutions Class 9 Science Chapter 1 Matter In Our Surroundings

Official Textbook Solutions: Class 9 Science Chapter 01 Matter In Our Surroundings

Access comprehensive textbook solutions for Chapter 01 Matter In Our Surroundings using the reference material for Class 9 Science. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Science: Chapter 01 Matter In Our Surroundings

Navigate directly to the solved Science textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Assess Yourself

Question 1. Why gases are compressible but not liquids?

Solution.

The intermolecular space between the gas particles is very large as compared to the intermolecular space between the liquid particles. Hence, gases are more compressible.

Question 2. What do you think, matter is made up of small particles or not?

Solution.

Yes, the matter is made up of very small particles. Any bulk material is made up of millions of smaller particles.

For eg, when sugar crystals are dissolved in water, the smaller particles dissociate from the crystal and dissolve in water.

Question 3. Why does the level of water not change when salt is dissolved in water?

Solution.

The level of water does not change when salt is dissolved in water because the salt particles dissociate and occupy the intermolecular spaces between the water particles. Since only the empty spaces are occupied, the level of water does not increase.

Question 4. What about a rubber band, can it change its shape? Is it solid?

Solution.

Yes, a rubber band can change its shape when a force is applied to it and can regain its shape when the force is removed. It is solid in nature but upon the application of force, the shape can change due to the elastic nature of the rubber band.

Question 5. Sugar and salt kept in different jars gain the shape of their respective jars. Are they solids?

Solution.

Sugar and salt are both solids. They take the shape of their respective jars as the individual crystals of each are small and many of these small sugar or salt crystals can fill up the empty spaces of a container.

Question 6. What is CGS unit of volume?

Solution.

The CGS unit of volume is the Litre.

Question 7. How many cm3 are there in 1 L?

Solution.

There are 1000 cm3 in 1L.

Question 8. What is meant by density?

Solution.

Density is the degree of compactness of the particles. It is also defined as the mass per unit volume of a material.

Question 9. Why is the density of solids mostly higher than that of liquids?

Solution.

The density of solids is higher than that of liquids because the particles are more compactly arranged in a solid with very less intermolecular spaces between them. In liquids, these intermolecular spaces are more and hence they are less dense.

Question 10. A sponge can be compressed. Is it solid or not? Why?

Solution.

Yes, a sponge is solid and it can be compressed because there are many small holes in it in which air is trapped. When a force is applied, for example, when the sponge is pressed, this air gets released and hence it can be compressed.

Question 11. What is meant by kinetic energy?

Solution.

The energy possessed by moving objects is known as kinetic energy. It depends on the mass of the object and also the velocity or speed at which the object is moving.

The unit of kinetic energy is Joules.

Question 12. Why do liquids flow?

Solution.

Liquids flow because the particles in a liquid are not very tightly bound to each other and they have high intermolecular spaces between them, which allows the particles to be displaced or move causing the liquids to flow.

Question 13. Why do people in villages use earthen pots in summer to cool water?

Solution.

The temperature during summer is high which increases the rate of evaporation. Earthen pots are made of clay that has many pores in it. The pores increase the rate of evaporation of water as the water can move via the pores through capillary action. With the increase in the rate of evaporation, the heat energy leaves the pots in the form of kinetic energy of the evaporated water. This, in turn, keeps the inside of the pot cool and the remaining water cooler. Hence, people in villages use earthen pots in summer to cool the water.

Question 14. Convert 100 °C to kelvin scale.

Solution.

We know,

0°C = 273 K

Therefore,

100°C = 273K + 100 = 373K.

Question 15. Write the name of two substances that sublime.

Solution.

1) Solid Carbon dioxide

2) Naphthalene

Explanation: Both these substances are solids and directly evaporate into their gaseous state depending on the temperature and pressure of the environment in which they are placed. Generally, these substances are solid at lower temperatures and evaporate into their gaseous state when the temperature increases.

Question 16. Give two factors which increase the rate of evaporation.

Solution.

1) Temperature: The increase in temperature causes an increase in the kinetic energy possessed by the particles which make the rate of their evaporation faster. Eg: When we increase the cooking gas flame from medium to high, the water boils faster.

2) Surface area: The higher the surface area, the more exposed are the particles and hence higher will be the rate of their evaporation. Eg: Water spilled on the floor dries faster when it is spread on the surface using a mop.

Question 17. Why does water have higher boiling point than alcohol? At what temperature in Kelvin, it can be changed into solid state and into vapours?

Solution.

The intermolecular forces of attraction that hold the water molecules together are stronger than the forces that hold the alcohol particles together. Hence, more energy is required to break these intermolecular forces of attraction of water particles than that of alcohol. This gives water a higher boiling point as more heat energy will be used than that for alcohol.

Water changes into solid state at a temperature of 273.15 K and turns into vapour at 373.15 K.

Question 18. B. Ice at 0 °C is more effective in cooling than water at 0 °C. Give reason.

Solution.

When ice melts or gets converted to liquid, it absorbs latent heat of fusion which is the heat energy required to change a solid into liquid at a constant pressure. Ice at 0°C absorbs much more heat to increase its temperature and melt as compared to water at 0°C. This makes ice at 0°C more effective in cooling than water at 0°C.

Question 19. Describe by experiment the relationship between the rate of diffusion and density of the liquid.

Solution.

Experiment:

i) In a glass filled with water, add 2 tablespoons of sugar and keep stirring until the sugar dissolves.

ii) Gradually increase the amount of sugar added to the water and notice that it takes more time for the sugar to dissolve than it did when only 2 tablespoons of sugar were added.

Explanation: The rate at which the sugar crystals dissolve in water is called the rate of diffusion. This rate was higher when the amount of sugar dissolved was less. As the amount or the density of sugar in the liquid increases the time taken for the sugar to

dissolve also increases, i.e, the rate of diffusion decreases. Hence, the rate of diffusion and density of liquid are inversely proportional to each other.

Question 20. How is melting point related to intermolecular forces of attraction? Why is latent heat of vaporization higher than latent heat of fusion?

Solution.

The intermolecular forces of attraction are the bonds that the particles in the matter form with each other. The stronger the bond, the stronger are the intermolecular forces of attraction between them. When the intermolecular forces of attraction are strong, a higher amount of heat energy will be needed to breaks these bonds and hence the melting point of strong intermolecular forces of attraction will be higher.

The latent heat of vaporization is higher than latent heat of fusion because the intermolecular space between gas particles is the greatest and the intermolecular forces of attraction are almost negligible. Hence more energy is needed to convert liquid into a gas. The transition of solid into liquid requires less energy because the energy used for this is only needed to decrease the intermolecular attraction between the particles.

Question 21. Show by an experiment that by increasing the temperature, the substance can be changed into liquid and then into vapours.

Solution.

Experiment:

i) Take a few ice cubes in a beaker and heat it using a burner. Suspend a laboratory thermometer into the beaker with the bulb in contact with the ice cubes to monitor the increase in temperature.

ii) As the temperature increases, the ice cubes start to melt and get converted into liquid water.

iii) Upon further increase in temperature, the water starts to boil and gets converted into gaseous water vapour.

Explanation: Increase in temperature causes an increase in the kinetic energy possessed by the particles. The increased kinetic energy starts breaking the intermolecular forces of attraction in solid ice and converts it into liquid water with more intermolecular space. Further, increase in the temperature results in a greater increase in the kinetic energy of liquid water particles which in turn get converted into their gaseous state and evaporate.

Question 22. Write an activity to show that water can be made to boil even at a temperate below its normal boiling point (100 °C).

Solution.

Activity:

i) Take some warm water in a cup. Gently, fill a 12ml plastic syringe with around 3ml of the warm water from the cup.

ii) Hold the syringe horizontally and press your index finger tightly over the tip of the syringe.

iii) Slowly pull out the plunger. The plunger will show some resistance and it pulls back in the opposite direction.

iv) Allow the plunger to slide back slowly into the syringe and then pull the plunger out again. Release the plunger quickly.

v) Pull the plunger out the 2nd time. Bubbles will start forming as the water in the syringe boils.

Explanation: The boiling of water does not only depend on temperature. Pressure also plays a role in the boiling of any liquid. When the pressure goes down below the atmospheric pressure of 1atm, water starts to boil at a temperature lower than its boiling temperature. By pulling the plunger out, we increase the volume inside the syringe but decrease the pressure. This causes the water molecules to gain more kinetic energy. The increase of energy breaks the forces of attraction between the water molecules and they begin to move freely. Hence the water starts to boil.

Step-by-Step Together With Solutions for Class 9 Math

Chapter-wise Together With Solutions: Together With Solutions Class 9 Science Chapter 1 Matter In Our Surroundings

Review detailed solutions for Class 9 Mathematics. The Together With Solutions Class 9 Science Chapter 1 Matter In Our Surroundings PDF provides comprehensive answers mapped to standard Together With Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with Together With Solutions

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your Class 9 Exam Preparation

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 9 Science?

They are chapter-wise solved questions from the book for Class 9 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 9 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 9 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 9 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 9 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.