Together With Solutions Class 10 Science Chapter 12 Electricity

Download Class 10 Science Textbook Solutions: Chapter 12 Electricity

Explore reliable textbook solutions for Chapter 12 Electricity tailored for Class 10 learners using methodologies. Utilizing these Science answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Access Textbook Answers and Solutions

Access the complete solution PDF for Class 10 Science below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Assess Yourself

Question 1. Which kind of charge moves: positive charges (protons) or negative charges (electrons)?

Solution.

Negative charge moves while protons can’t move because they are stuck in the nucleus so they can't move due to "strong nuclear force".

Teacher's Note: Electrons move because protons are fixed in the nucleus; conventional current direction is opposite to electron flow.

Exam Note: State electrons carry charge in conductors.

Question 2. Is electric current a scalar or vector quantity? Sate the smaller unit of current.

Solution.

Electric current is a scalar quantity because it is the measure of how much charge flow through a particular area.

Smaller unit of current is Ampere denoted by A.

Teacher's Note: Current is scalar despite having direction; ampere is the SI unit and milliampere or microampere are smaller units.

Exam Note: Quote milliampere, not ampere, as the smaller unit.

Question 3. What is electric potential?

Solution.

The electric potential, or voltage, is the difference in potential energy per unit charge between two locations in an electric field.

Teacher's Note: Potential is work done per unit charge; potential difference is the energy needed to move unit charge between two points.

Exam Note: Define using work and unit charge; unit is volt.

Question 4. Calculate the work done in moving a charge of 5 coulombs from a point at 20 to another at 30 V.

Solution.

Given;

Charge (Q) = 5C;

Potential difference = 30 – 20 = 10V;

Work done = Charge × Potential difference

⇒ Work done = 5 × 10 = 50 J.

Hence the work done is 50 Joule.

Teacher's Note: Use W = Q times potential difference, with difference 30 minus 20 giving 10 V; final work is 50 J.

Exam Note: Show formula, substitution and unit joule.

Question 5. Electrons are responsible for conduction in a conductor. The speed of electron is not very high. Then, how the bulb is on immediately even through the switch and bulb are far away from each other in a household circuit?

Solution.

This is because the number of the free electrons constituting current in a typical conductor is very large of order 1018 or more. This large electron number density keeps the good amount of current flowing through.

Teacher's Note: Bulb lights instantly because the electric field sets all free electrons drifting together; drift speed itself is very small.

Exam Note: Mention drift speed is small but field spreads instantly.

Question 6. How does the resistance of an ohmic conductor depend on the applied voltage?

Solution.

Resistance do not depend on the voltage it depends on the material of the resistor whether the intermolecular force of attraction is strong or loose which decides the resistance.

Teacher's Note: For an ohmic conductor, resistance stays constant with voltage; it depends on material, length, area and temperature.

Exam Note: State V is proportional to I, resistance constant.

Question 7. An electric fan/motor becomes warm when continuously used for a long time. Why?

Solution.

In the electric fan motor the

Electrical energy is transferred into the mechanical energy, due to which some amount of the energy is lost in form of heat energy and is dissipated into the surroundings. That is why appliances like electric fan/motor become warm after continuous usage.

Teacher's Note: Some electrical energy is lost as heat through winding resistance and friction, so the motor warms up.

Exam Note: Mention heating effect and energy dissipation.

Question 8. The electric power consumed by a device may be calculated by the using either of the two expressions P = I2R or P = V2/R. The first expression indicates that it is directly proportional to R whereas the second expression indicates inverse proportionality. How can the seemingly different dependence of P on R in these expressions be explained.

Solution.

Both the expressions are correct. In the first case where P = I2R current (I) remains constant. Whereas in the second expression where P = V2/R the Voltage (V) remains constant.

Therefore P = I2R is used where the resistors are connected in series because in the series connection the current in each resistance is constant.

P = V2/R is used where the resistors are connected in parallel because in the parallel connection the voltage in each resistance is constant. So power becomes inversely proportional to resistance.

Teacher's Note: P = I squared R suits series circuits with equal current; V squared over R suits parallel circuits.

Exam Note: Match each formula with its circuit condition.

Question 9. A. A simple circuit consists of a resistor, a battery, and connecting wires. How must a voltmeter be connected to a resistor in order to read the potential difference across it?

Solution.

The voltmeter must be connected in parallel to the resistor to read the potential difference across the resistor

Voltmeter has very high resistance to ensure that it's connection do not change the flow of current in the circuit. Now if it is connected in series then no current will be there in the circuit due to its high resistance. Hence it is connected in parallel to the load across which potential difference is to be measured.

Also the voltage in the parallel connection is constant; therefore we will not get any error while measuring the voltage across resistor.

Teacher's Note: Voltmeter goes in parallel and has very high resistance so it draws almost no current from the circuit.

Exam Note: State parallel connection plus high resistance reason.

Question 10. B. A simple circuit consists of a resistor, a battery, and connecting wires. How must an ammeter be connected in a circuit to correctly read the current?

Solution.

The ammeter must be connected in the series to read the current correctly. Ammeter has very low resistance If it is connected in parallel across any load then all current in circuit will choose lower resistive path (i.e ammeter) which will cause the circuit to be damaged. Hence it is used in series. Also the current in the series is always same.

Teacher's Note: Ammeter goes in series and has very low resistance; in parallel it would draw excessive current and be damaged.

Exam Note: Mention series connection and low resistance.

Question 11. A. Shushant was doing an experiment by using an ammeter. Unfortunately, it fell from his hand and broke. Fearing the scolding of teacher, his group mates advised him not to tell the teacher, but he told her. On listening to him patiently, the teacher did not scold him as it was just and accident and used the opportunity to show the whole class the internal structure of ammeter. What are the values displayed by Shushant?

Solution.

Shushant told his teacher that ammeter was broke by him he did not hide from his teacher this shows that Shushant is very honest and respectful towards his teacher. Also, in spite of his group mates telling him not to tell to the teacher he developed enough courage to tell everything to his teacher this show that he is courageous and confident student who accept his mistake.

Teacher's Note: Value-based answer: highlight honesty, courage and responsibility shown by admitting the mistake despite peer pressure.

Exam Note: Name two values with a brief justification.

Class 10 Mathematics: Together With Solutions for Together With Solutions Class 10 Science Chapter 12 Electricity

Download Together With Solutions for Class 10

Access the complete chapter-wise PDF for Together With Solutions Class 10 Science Chapter 12 Electricity. These structured Together With Solutions solutions for Class 10 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Next Steps in Your Mathematics Revision

In addition to these Together With Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 10 Science?

They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 10 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 10 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 10 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 10 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.