Official Pradeep's KL Gogia Textbook Solutions: Class 11 Physics Chapter 08 Laws Of Motion
Review structured textbook solutions for Class 11 Physics Chapter 08 Laws Of Motion prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Chapter-wise Solutions for Physics: Chapter 08 Laws Of Motion
Access the complete solution PDF for Class 11 Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Pradeep's KL Gogia Solutions Physics Chapter 8 Laws Of Motion - Pages 31-60
Sample Problems (Miscellaneous)
Question 70. In the above problem, the additional distance traversed by m2 in coming to rest position will be
(a) 20 cm (b) 40 cm (c) 60 cm (d) 80 cm
Solution. (a) When m2 acquired velocity 200 cm/s it will move upward until its velocity becomes zero. H = u²/2g = (200)²/(2 × 1000) = 20 cm. Corrected: the book prints 2 × 100 in the denominator; with g = 1000 cm/s² the working is as shown and the answer (a) 20 cm stands.
Teacher's Note: After the string goes slack it rises freely: use H = u²/2g with consistent cm units.
Exam Note: Keep cm with g = 1000 cm/s², not 10.
Question 71. The acceleration of block B in the figure will be
(a) m2g/(4m1 + m2) (b) 2m2g/(4m1 + m2) (c) 2m1g/(m1 + 4m2) (d) 2m1g/(m1 + m2)
(Figure: block A of mass m1 on a horizontal table is joined by a string over a fixed pulley to a movable pulley; block B of mass m2 hangs from the movable pulley, whose string goes up to a fixed support.)
Solution. (a) When block m2 moves down with acceleration a, mass m1 has acceleration 2a, because it covers double the distance in the same time. Let T be the string tension. Free body diagrams of A and B give T = m1(2a) …(i) and m2g − 2T = m2a …(ii). Solving (i) and (ii): a = m2g/(4m1 + m2).
Teacher's Note: Movable pulley: the free string end moves twice as far, so its acceleration is double.
Exam Note: Write the constraint aA = 2aB first.
Question 72. A body weighs 8 gm, when placed in one pan and 18 gm, when placed in the other pan of a false balance. If the beam is horizontal (when both the pans are empty), the true weight of the body is
(a) 13 gm (b) 12 gm (c) 15.5 gm (d) 15 gm
Solution. (b) For the given condition true weight = √(W1W2) = √(8 × 18) = 12 gm.
Teacher's Note: Beam horizontal with unequal arms: true weight is the geometric mean of the two readings.
Exam Note: Unequal arms: GM; unequal pans: AM.
Question 73. A plumb line is suspended from a ceiling of a car moving with horizontal acceleration of a. What will be the angle of inclination with vertical [Orissa JEE 2003]
(a) tan−1(a/g) (b) tan−1(g/a) (c) cos−1(a/g) (d) cos−1(g/a)
Solution. (a) From the figure, tan θ = a/g, so θ = tan−1(a/g).
Teacher's Note: In the car frame the bob feels pseudo force ma backwards; balance with mg gives tan θ.
Exam Note: Memorise tan θ = a/g for plumb lines.
Question 74. A block of mass 5 kg is moving horizontally at a speed of 1.5 m/s. A perpendicular force of 5 N acts on it for 4 sec. What will be the distance of the block from the point where the force started acting [Pb PMT 2002]
(a) 10 m (b) 8 m (c) 6 m (d) 2 m
Solution. (a) The force acts perpendicular to the initial velocity, so the body moves with constant velocity in the horizontal direction and under the force in the vertical direction. Sx = uxt = 1.5 × 4 = 6 m. Sy = ut + ½at² = 0 + ½(F/m)t² = ½(5/5)(4)² = 8 m. ∴ S = √(Sx² + Sy²) = √(36 + 64) = √100 = 10 m.
Teacher's Note: Perpendicular force: treat the two directions independently, then combine with Pythagoras.
Exam Note: Do not answer 8 m or 6 m alone.
Question 75. The velocity of a body of rest mass m0 is (√3/2)c (where c is the velocity of light in vacuum). Then mass of this body is [Orissa JEE 2002]
(a) (√3/2)m0 (b) (1/2)m0 (c) 2m0 (d) (2/√3)m0
Solution. (c) From Einstein's formula m = m0/√(1 − v²/c²) = m0/√(1 − 3/4) = 2m0.
Teacher's Note: Relativistic mass: v² = 3c²/4 makes the root equal 1/2.
Exam Note: Substitute v/c carefully; root gives 1/2.
Question 76. Three weights W, 2W and 3W are connected to identical springs suspended from a rigid horizontal rod. The assembly of the rod and the weights fall freely. The positions of the weights from the rod are such that [Roorkee 1999]
(a) 3W will be farthest (b) W will be farthest (c) All will be at the same distance (d) 2W will be farthest
Solution. (c) For W, 2W, 3W the apparent weight will be zero because the system is falling freely. So there will be no extension in any spring, i.e. the distances of the weights from the rod will be the same.
Teacher's Note: Free fall means apparent weight zero, so springs stay at natural length.
Exam Note: Link free fall to weightlessness.
Question 77. A bird is sitting on stretched telephone wires. If its weight is W then the additional tension produced by it in the wires will be
(a) T = W (b) T > W (c) T < W (d) T = 0
Solution. (b) For equilibrium 2T sin θ = W, so T = W/(2 sin θ). θ lies between 0 to 90°, i.e. sin θ < 1, ∴ T > W.
Teacher's Note: Vertical components 2T sin θ balance W; small θ means very large tension.
Exam Note: State sin θ < 1 to justify T > W.
Question 78. With what minimum acceleration can a fireman slide down a rope while breaking strength of the rope is (2/3) his weight [CPMT 1979]
(a) (2/3)g (b) g (c) (1/3)g (d) Zero
Solution. (c) When the fireman slides down, tension in the rope T = m(g − a). For the critical condition m(g − a) = (2/3)mg ⇒ mg − ma = (2/3)mg ∴ a = g/3. So this is the minimum acceleration with which a fireman can slide down the rope.
Teacher's Note: Sliding down: T = m(g − a); set T equal to the breaking tension.
Exam Note: Minimum a corresponds to maximum allowed tension.
Question 79. A car moving at a speed of 30 kilometers per hour is brought to a halt in 8 metres by applying brakes. If the same car is moving at 60 km per hour, it can be brought to a halt with same braking power in
(a) 8 metres (b) 16 metres (c) 24 metres (d) 32 metres
Solution. (d) From v² = u² − 2as, 0 = u² − 2as, so s = u²/2a ⇒ s ∝ u² (if a = constant). s2/s1 = (u2/u1)² = (60/30)² = 4 ⇒ s2 = 4s1 = 4 × 8 = 32 metres.
Teacher's Note: Stopping distance scales with the square of speed for constant retardation.
Exam Note: Double speed gives four times distance.
Sample Problems Based on Fundamentals of Friction
Question Friction 1. If a ladder weighing 250 N is placed against a smooth vertical wall having coefficient of friction between it and floor is 0.3, then what is the maximum force of friction available at the point of contact between the ladder and the floor [AIIMS 2002]
(a) 75 N (b) 50 N (c) 35 N (d) 25 N
Solution. (a) Maximum force of friction Fl = μsR = 0.3 × 250 = 75 N.
Teacher's Note: Normal reaction at the floor equals the ladder weight because the wall is smooth.
Exam Note: Wall smooth: no friction there.
Question Friction 2. On the horizontal surface of a truck (μ = 0.6), a block of mass 1 kg is placed. If the truck is accelerating at the rate of 5 m/s² then frictional force on the block will be
(a) 5 N (b) 6 N (c) 5.88 N (d) 8 N
Solution. (a) Limiting friction = μsR = μsmg = 0.6 × 1 × 9.8 = 5.88 N. When the truck accelerates forward at 5 m/s² a pseudo force (ma) of 5 N works on the block in the backward direction. Here the magnitude of the pseudo force is less than limiting friction, so static friction works between the block and the surface of the truck and, as we know, static friction = applied force = 5 N.
Teacher's Note: Compare required force ma with limiting friction first; if smaller, friction equals ma.
Exam Note: Do not answer with limiting value 5.88 N.
Question Friction 3. A block of mass 2 kg is kept on the floor. The coefficient of static friction is 0.4. If a force F of 2.5 N is applied on the block as shown in the figure, the frictional force between the block and the floor will be [MP PET 2]
(a) 2.5 N (b) 5 N (c) 7.84 N (d) 10 N
(Figure: block on a horizontal floor pulled by a horizontal force F to the right.)
Solution. (a) Applied force = 2.5 N and limiting friction = μmg = 0.4 × 2 × 9.8 = 7.84 N. As the applied force is less than limiting friction, static friction acts and equals the applied force = 2.5 N.
Teacher's Note: Static friction is self-adjusting: equals applied force until the limit is reached.
Exam Note: Check F against μmg before choosing.
Question Friction 4. A block A with mass 100 kg is resting on another block B of mass 200 kg. As shown in figure a horizontal rope tied to a wall holds it. The coefficient of friction between A and B is 0.2 while coefficient of friction between B and the ground is 0.3. The minimum required force F to start moving B will be
(a) 900 N (b) 100 N (c) 1100 N (d) 1200 N
(Figure: block A on block B; a horizontal rope from A to a wall; force F pulls B horizontally away from the wall; fAB and fBG act on B opposite to F.)
Solution. (c) Two frictional forces work on block B. F = fAB + fBG = μABmAg + μBG(mA + mB)g = 0.2 × 100 × 10 + 0.3 × (300) × 10 = 200 + 900 = 1100 N. (This is the required minimum force.)
Teacher's Note: Ground friction uses combined weight 300 kg; the A-B friction uses only A's weight.
Exam Note: Two friction forces act on B; add both.
Question Friction 5. A 20 kg block is initially at rest on a rough horizontal surface. A horizontal force of 75 N is required to set the block in motion. After it is in motion, a horizontal force of 60 N is required to keep the block moving with constant speed. The coefficient of static friction is
(a) 0.38 (b) 0.44 (c) 0.52 (d) 0.60
Solution. (a) Coefficient of static friction μs = Fl/R = 75/(20 × 9.8) = 0.38.
Teacher's Note: Static coefficient uses the force needed to start motion (75 N), not the 60 N.
Exam Note: 60 N gives kinetic coefficient 0.31.
Question Friction 6. A block of mass M is placed on a rough floor of a lift. The coefficient of friction between the block and the floor is μ. When the lift falls freely, the block is pulled horizontally on the floor. What will be the force of friction
(a) μMg (b) μMg/2 (c) 2μMg (d) None of these
Solution. (d) When the lift moves downward with acceleration a, the effective acceleration due to gravity is g′ = g − a ∴ g′ = g − g = 0 [as the lift falls freely, a = g]. So force of friction = μmg′ = 0.
Teacher's Note: Free fall gives zero apparent weight, so normal reaction and friction vanish.
Exam Note: Answer is zero, hence "none of these".
Question Friction 7. A body of 5 kg weight kept on a rough inclined plane of angle 30° starts sliding with a constant velocity. Then the coefficient of friction is (assume g = 10 m/s²)
(a) 1/√3 (b) 2/√3 (c) √3 (d) 2√3
Solution. (a) Here the given angle is the angle of repose. So μ = tan 30° = 1/√3.
Teacher's Note: Sliding at constant speed means net force zero, so μ = tan of incline angle.
Exam Note: Mass and g are irrelevant here.
Question Friction 8. The upper half of an inclined plane of inclination θ is perfectly smooth while the lower half is rough. A body starting from rest at top comes back to rest at the bottom if the coefficient of friction for the lower half is given [Pb PMT 2000]
(a) μ = sin θ (b) μ = cot θ (c) μ = 2 cos θ (d) μ = 2 tan θ
(Figure: incline with the upper half marked smooth and the lower half marked rough.)
Solution. (d) For the upper half, by the equation of motion v² = u² + 2as: v² = 0² + 2(g sin θ)(l/2) = gl sin θ [u = 0, s = l/2, a = g sin θ]. For the lower half: 0 = u² + 2g(sin θ − μ cos θ)(l/2) [v = 0, s = l/2, a = g(sin θ − μ cos θ), where u² is the value of v² above, i.e. the final velocity of the upper half equals the initial velocity of the lower half] ⇒ 0 = gl sin θ + gl(sin θ − μ cos θ) ⇒ 2 sin θ = μ cos θ ⇒ μ = 2 tan θ.
Teacher's Note: Speed gained on the smooth half is lost on the rough half; equate the two.
Exam Note: Use the speed at mid-point as link.
Question Friction 9. What is the maximum value of the force F such that the block shown in the arrangement does not move (μ = 1/(2√3)) [IIT-JEE (Screening) 2003]
(a) 20 N (b) 10 N (c) 12 N (d) 15 N
(Figure: block of mass m = √3 kg on a horizontal floor, force F pressing down on it at 60° to the horizontal; free body diagram: friction f, F cos 60°, W + F sin 60°.)
Solution. (a) Frictional force f = μR ⇒ F cos 60° = μ(W + F sin 60°) ⇒ F cos 60° = (1/(2√3))(√3 g + F sin 60°) ⇒ F = 20 N. (Check with g = 10 m/s²: F/2 = 5 + F/4, so F = 20 N.)
Teacher's Note: Pushing at an angle adds F sin 60° to the normal reaction; balance horizontally.
Exam Note: Use g = 10 to match the option.
Question Friction 10. A block of mass m rests on a rough horizontal surface as shown in the figure. Coefficient of friction between the block and the surface is μ. A force F = mg acting at angle θ with the vertical side of the block pulls it. In which of the following cases the block can be pulled along the surface
(a) tan θ ≥ μ (b) cot θ ≥ μ (c) tan(θ/2) ≥ μ (d) cot(θ/2) ≥ μ
(Figure: block of mass m on a rough floor, force F = mg inclined at θ to the vertical side of the block; the horizontal component is mg sin θ.)
Solution. (d) For pulling the block, P ≥ f ⇒ mg sin θ ≥ μR ⇒ mg sin θ ≥ μ(mg − mg cos θ) ⇒ sin θ ≥ μ(1 − cos θ) ⇒ 2 sin(θ/2) cos(θ/2) ≥ μ(2 sin²(θ/2)) ⇒ cot(θ/2) ≥ μ.
Teacher's Note: Vertical part mg cos θ lifts the block, reducing normal reaction to mg(1 − cos θ).
Exam Note: Use half-angle identities to reach cot(θ/2).
Sample Problems Based on Acceleration Against Friction
Question Friction 11. A body of mass 10 kg is lying on a rough plane inclined at an angle of 30° to the horizontal and the coefficient of friction is 0.5. The minimum force required to pull the body up the plane is
(a) 914 N (b) 91.4 N (c) 9.14 N (d) 0.914 N
Solution. (b) F = mg(sin θ + μ cos θ) = 10 × 9.8 × (sin 30° + 0.5 cos 30°) = 91.4 N.
Teacher's Note: Pulling up at constant speed: force balances mg sin θ plus friction μmg cos θ.
Exam Note: Check the decimal place: 98 × 0.933.
Question Friction 12. A block of mass 10 kg is placed on a rough horizontal surface having coefficient of friction μ = 0.5. If a horizontal force of 100 N is acting on it, then acceleration of the block will be [AIIMS 2002]
(a) 0.5 m/s² (b) 5 m/s² (c) 10 m/s² (d) 15 m/s²
Solution. (b) a = (applied force − kinetic friction)/mass = (100 − 0.5 × 10 × 10)/10 = 5 m/s².
Teacher's Note: Net force is applied force minus kinetic friction; g = 10 m/s² is used.
Exam Note: Subtract friction before dividing by mass.
Question Friction 13. A body of weight 64 N is pushed with just enough force to start it moving across a horizontal floor and the same force continues to act afterwards. If the coefficients of static and dynamic friction are 0.6 and 0.4 respectively, the acceleration of the body will be (Acceleration due to gravity = g) [EAMCET 2001]
(a) g/6.4 (b) 0.64 g (c) g/32 (d) 0.2 g
Solution. (d) Limiting friction Fl = μsR ⇒ 64 = 0.6 mg ⇒ m = 64/(0.6g). Acceleration = (applied force − kinetic friction)/mass = (64 − μkmg)/m = (64 − 0.4 × 64/0.6)/(64/(0.6g)) = 0.2g.
Teacher's Note: Force that just starts motion equals limiting friction; afterwards kinetic friction is smaller.
Exam Note: Express a as (μs − μk)g.
Question Friction 14. If a block moving up at θ = 30° with a velocity 5 m/s, stops after 0.5 sec, then what is μ
(a) 0.5 (b) 1.25 (c) 0.6 (d) None of these
Solution. (c) From v = u − at ⇒ 0 = u − at ∴ t = u/a. For upward motion on an inclined plane a = g(sin θ + μ cos θ), ∴ t = u/[g(sin θ + μ cos θ)]. Substituting θ = 30°, t = 0.5 s and u = 5 m/s, we get μ = 0.6. (Check: a = 10 m/s²; with g = 9.8, sin 30° + μ cos 30° = 1.02 gives μ ≈ 0.6; with g = 10, μ ≈ 0.58.)
Teacher's Note: Find retardation a = u/t, then equate to g(sin θ + μ cos θ).
Exam Note: Retardation on incline includes both gravity and friction.
Sample Problems Based on Work Done Against Friction
Question Friction 15. A body of mass 5 kg rests on a rough horizontal surface of coefficient of friction 0.2. The body is pulled through a distance of 10 m by a horizontal force of 25 N. The kinetic energy acquired by it is (g = 10 m/s²) [EAMCET (Med.) 2000]
(a) 330 J (b) 150 J (c) 100 J (d) 50 J
Solution. (b) Kinetic energy acquired by body = total work done on the body − work done against friction = F × S − μmgS = 25 × 10 − 0.2 × 5 × 10 × 10 = 250 − 100 = 150 J.
Teacher's Note: Work-energy theorem: net work (force minus friction work) becomes kinetic energy.
Exam Note: Subtract friction work 100 J from 250 J.
Question Friction 16. 300 Joule of work is done in sliding a 2 kg block up an inclined plane to a height of 10 meters. Taking value of acceleration due to gravity 'g' to be 10 m/s², work done against friction is [MP PMT 2002]
(a) 100 J (b) 200 J (c) 300 J (d) Zero
Solution. (a) Work done against gravity = mgh = 2 × 10 × 10 = 200 J. Work done against friction = total work done − work done against gravity = 300 − 200 = 100 J.
Teacher's Note: Total work splits into gain in potential energy and heat lost to friction.
Exam Note: Compute mgh first, subtract from 300 J.
Question Friction 17. A block of mass 1 kg slides down on a rough inclined plane of inclination 60° starting from its top. If the coefficient of kinetic friction is 0.5 and length of the plane is 1 m, then work done against friction is (Take g = 9.8 m/s²) [AFMC 2000; KCET (Engg./Med.) 2001]
(a) 9.82 J (b) 4.94 J (c) 2.45 J (d) 1.96 J
Solution. (c) W = μmg cos θ · S = 0.5 × 1 × 9.8 × ½ = 2.45 J.
Teacher's Note: Friction on an incline is μmg cos θ times the path length; cos 60° = 1/2.
Exam Note: Use cos, not sin, for normal reaction.
Question Friction 18. A block of mass 50 kg slides over a horizontal distance of 1 m. If the coefficient of friction between their surfaces is 0.2, then work done against friction is [CBSE PMT 1999, 2000; AIIMS 2000; BHU 2001]
(a) 98 J (b) 72 J (c) 56 J (d) 34 J
Solution. (a) W = μmgS = 0.2 × 50 × 9.8 × 1 = 98 J.
Teacher's Note: Work against friction on level ground is simply friction force times distance.
Exam Note: Use g = 9.8 to match option.
Sample Problems Based on Body Resting on Another
Question Friction 19. A 4 kg block A is placed on the top of a 8 kg block B which rests on a smooth table. A just slips on B when a force of 12 N is applied on A. Then the maximum horizontal force on B to make both A and B move together, is
(a) 12 N (b) 24 N (c) 36 N (d) 48 N
Solution. (c) Maximum friction, i.e. limiting friction between A and B, Fl = 12 N. If F is the maximum value of force applied on the lower body such that both bodies move together, the pseudo force on the upper body is just equal to limiting friction: Fl = m(F/(m + M)) ⇒ (4/(4 + 8))F = 12 ∴ F = 36 N.
Teacher's Note: Common acceleration F/(m+M); friction on A must supply mF/(m+M) at the limit.
Exam Note: Same limiting friction in both pull cases.
Question Friction 20. A body A of mass 1 kg rests on a smooth surface. Another body B of mass 0.2 kg is placed over A as shown. The coefficient of static friction between A and B is 0.15. B will begin to slide on A if A is pulled with a force greater than
(a) 1.764 N (b) 0.1764 N (c) 0.3 N (d) It will not slide for any F
(Figure: body B on top of body A; A is pulled to the right by a horizontal force.)
Solution. (a) B will begin to slide on A if the pseudo force is more than limiting friction: F > Fl ⇒ m(F/(m + M)) > μsR ⇒ 0.2·F/1.2 > 0.15 × 0.2 × 9.8 ∴ F > 1.764 N.
Teacher's Note: B slides when its required acceleration exceeds the maximum μg friction can give.
Exam Note: Total mass 1.2 kg goes in the denominator.
Question Friction 21. A block A of mass 2 kg rests on another block B of mass 8 kg which rests on a horizontal floor. The coefficient of friction between A and B is 0.2, while that between B and floor is 0.5. When a horizontal force of 25 N is applied on the block B, the force of friction between A and B is [IIT-JEE 1993]
(a) Zero (b) 3.9 N (c) 5.0 N (d) 49 N
Solution. (a) Limiting friction between block B and the surface FBS = μBSR = 0.5(m + M)g = 0.5(2 + 8)10 = 50 N. But the applied force is 25 N, so the lower block will not move, i.e. there is no pseudo force on the upper block A. Hence there will be no force of friction between A and B.
Teacher's Note: Compare applied force with floor limiting friction first; if B stays, A feels nothing.
Exam Note: Check whether B moves at all.
Motion of an Insect in the Rough Bowl
Question Friction 22. An insect crawls up a hemispherical surface very slowly (see the figure). The coefficient of friction between the insect and the surface is 1/3. If the line joining the centre of the hemispherical surface to the insect makes an angle α with the vertical, the maximum possible value of α is given by [IIT-JEE (Screening) 2001]
(a) cot α = 3 (b) tan α = 3 (c) sec α = 3 (d) cosec α = 3
(Figure: insect on the inside of a hemispherical bowl; α is the angle between the vertical and the line from the centre to the insect.)
Solution. (a) From the above expression, for equilibrium R = mg cos α and F = mg sin α. Substituting these values in F = μR we get tan α = μ or cot α = 1/μ = 3.
Teacher's Note: At the highest point friction is limiting: tan α = μ.
Exam Note: tan α = 1/3 means cot α = 3.
Sample Problems Based on Hung Mass
Question Friction 23. Two blocks of mass M1 and M2 are connected with a string passing over a pulley as shown in the figure. The block M1 lies on a horizontal surface. The coefficient of friction between the block M1 and horizontal surface is μ. The system accelerates. What additional mass m should be placed on the block M1 so that the system does not accelerate
(a) (M2 − M1)/μ (b) M2/μ − M1 (c) M2 − M1/μ (d) (M2 − M1)μ
(Figure: M1 on a horizontal table joined by a string over a pulley at the table edge to M2 hanging.)
Solution. (b) By comparing the given condition with the general expression μ = M2/(m + M1) ⇒ m + M1 = M2/μ ⇒ m = M2/μ − M1.
Teacher's Note: No acceleration means hanging weight equals limiting friction on the total mass on the table.
Exam Note: Add m to M1 before applying μ.
Question Friction 24. The coefficient of kinetic friction is 0.03 in the diagram where mass m2 = 20 kg and m1 = 4 kg. The acceleration of the block shall be (g = 10 m s−2)
(a) 1.8 m s−2 (b) 0.8 m s−2 (c) 1.4 m s−2 (d) 0.4 m s−2
(Figure: m2 = 20 kg on a horizontal table joined over a pulley to m1 = 4 kg hanging.)
Solution. (c) Let the acceleration of the system be a. From the F.B.D. of m2: T − F = m2a ⇒ T − μm2g = m2a ⇒ T − 0.03 × 20 × 10 = 20a ⇒ T − 6 = 20a …(i). From the FBD of m1: m1g − T = m1a ⇒ 4 × 10 − T = 4a ⇒ 40 − T = 4a …(ii). Solving (i) and (ii): a = 1.4 m/s².
Teacher's Note: Add the two equations: net driving force 40 − 6 over total mass 24 kg.
Exam Note: Friction acts only on the table block.
Question Friction 25. A heavy uniform chain lies on a horizontal table top. If the coefficient of friction between the chain and the table surface is 0.25, then the maximum fraction of the length of the chain that can hang over one edge of the table is [CBSE PMT 1990]
(a) 20% (b) 25% (c) 35% (d) 15%
Solution. (a) From the expression l′ = (μ/(μ + 1))l = (0.25/(0.25 + 1))l [as μ = 0.25] ⇒ l′ = (0.25/1.25)l = l/5 = 20% of the length of the chain.
Teacher's Note: Hanging weight equals limiting friction on the part lying on the table: μ = l′/(l − l′).
Exam Note: Fraction is μ/(1 + μ), not μ.
Sample Problems Based on Motion of Body on Rough Surface
Question Friction 26. A body takes just twice the time as long to slide down a plane inclined at 30° to the horizontal as if the plane were frictionless. The coefficient of friction between the body and the plane is [JIPMER 1999]
(a) √3/4 (b) √3 (c) 4/3 (d) 3/4
Solution. (a) μ = tan θ(1 − 1/n²) = tan 30°(1 − 1/2²) = (1/√3)(3/4) = √3/4.
Teacher's Note: Same length, time doubled means acceleration falls to one quarter: sin θ = n²(sin θ − μ cos θ).
Exam Note: n = 2 gives factor 3/4.
Question Friction 27. A marble block of mass 2 kg lying on ice when given a velocity of 6 m/s is stopped by friction in 10 s. Then the coefficient of friction is
(a) 0.01 (b) 0.02 (c) 0.03 (d) 0.06
Solution. (d) v = u − at = u − μgt = 0 ∴ μ = u/(gt) = 6/(10 × 10) = 0.06.
Teacher's Note: Retardation is μg, so mass cancels; use v = u − μgt.
Exam Note: Mass 2 kg is a distractor.
Question Friction 28. A 2 kg mass starts from rest on an inclined smooth surface with inclination 30° and length 2 m. How much will it travel before coming to rest on a surface with coefficient of friction 0.25
(a) 4 m (b) 6 m (c) 8 m (d) 2 m
Solution. (a) v² = u² + 2aS = 0 + 2 × g sin 30° × 2, so v² = 20 (v = √20). Let it travel distance S before coming to rest: S = v²/(2μg) = 20/(2 × 0.25 × 10) = 4 m.
Teacher's Note: Speed at the bottom of the smooth incline becomes initial speed for the rough surface.
Exam Note: Take g = 10 m/s² throughout.
Sample Problems (Miscellaneous)
Question Friction 29. A motorcycle is travelling on a curved track of radius 500 m if the coefficient of friction between road and tyres is 0.5. The speed avoiding skidding will be [MH CET (Med.) 2001]
(a) 50 m/s (b) 75 m/s (c) 25 m/s (d) 35 m/s
Solution. (a) v = √(μrg) = √(0.5 × 500 × 10) = 50 m/s.
Teacher's Note: Friction supplies centripetal force: μmg = mv²/r gives maximum safe speed.
Exam Note: Use v = √(μrg) directly.
Question Friction 30. A horizontal force of 10 N is necessary to just hold a block stationary against a wall. The coefficient of friction between the block and the wall is 0.2. The weight of the block is [AIEEE 2003]
(a) 2 N (b) 20 N (c) 50 N (d) 100 N
(Figure: block pressed against a vertical wall by a horizontal force of 10 N; R, friction F upward and weight W downward.)
Solution. (a) For equilibrium, weight (W) = force of friction (F): W = μR = 0.2 × 10 = 2 N.
Teacher's Note: Pressing force equals normal reaction; friction balances weight vertically.
Exam Note: Friction = μ × pressing force.
Question Friction 31. A body of mass 2 kg is kept pressing to a vertical wall by a force of 100 N. The friction between wall and body is 0.3. Then the frictional force is equal to [Orissa JEE 2003]
(a) 6 N (b) 20 N (c) 600 N (d) 700 N
Solution. (b) For the given condition, static friction = applied force = weight of body = 2 × 10 = 20 N.
Teacher's Note: Body is at rest, so static friction equals weight; limiting value μR = 30 N is not reached.
Exam Note: Do not use μR = 30 N here.
Question Friction 32. A fireman of mass 60 kg slides down a pole. He is pressing the pole with a force of 600 N. The coefficient of friction between the hands and the pole is 0.5, with what acceleration will the fireman slide down (g = 10 m/s²) [Pb. PMT 2002]
(a) 1 m/s² (b) 2.5 m/s² (c) 10 m/s² (d) 5 m/s²
Solution. (d) Friction = μR = 0.5 × 600 = 300 N, weight = 600 N. ma = W − F ⇒ a = (W − F)/m = (600 − 300)/60 ∴ a = 5 m/s².
Teacher's Note: Net downward force is weight minus kinetic friction from the grip.
Exam Note: Weight is 60 × 10 = 600 N.
Question Friction 33. The system shown in the figure is in equilibrium. The maximum value of W, so that the maximum value of static frictional force on 100 kg body is 450 N, will be
(a) 100 N (b) 250 N (c) 450 N (d) 1000 N
(Figure: 100 kg block on a table; a horizontal string to a knot, a second string at 45° to the ceiling, and weight W hanging from the knot.)
Solution. (c) For vertical equilibrium T1 sin 45° = W ∴ T1 = W/sin 45°. For horizontal equilibrium T2 = T1 cos 45° = (W/sin 45°)cos 45° = W. For the critical condition T2 = F ∴ W = T2 = F = 450 N.
Teacher's Note: At 45° the horizontal tension equals W; set it equal to maximum friction.
Exam Note: tan 45° = 1 makes T2 = W.
Practice Problems
Basic Level
Question Practice 1. When a body is moving on a surface, the force of friction is called [MP PET 2002]
(a) Static friction (b) Dynamic friction (c) Limiting friction (d) Rolling friction
Solution. (b) Friction acting on a body that is moving over a surface is dynamic (kinetic) friction.
Teacher's Note: Static: no motion; limiting: about to move; dynamic: moving.
Exam Note: Moving means kinetic friction.
Question Practice 2. Which one of the following is not used to reduce friction [Kerala (Engg.) 2001]
(a) Oil (b) Ball bearings (c) Sand (d) Graphite
Solution. (c) Oil, ball bearings and graphite reduce friction; sand increases it.
Teacher's Note: Lubricants and rolling elements reduce friction; sand adds roughness.
Exam Note: Sand increases friction on slippery ground.
Question Practice 3. A block of mass 10 kg is placed on an inclined plane. When the angle of inclination is 30°, the block just begins to slide down the plane. The force of static friction is
(a) 10 kg wt (b) 89 kg wt (c) 49 kg wt (d) 5 kg wt
Solution. (d) At the verge of sliding, friction = mg sin 30° = 10 × ½ = 5 kg wt.
Teacher's Note: At the verge of sliding, friction balances mg sin θ.
Exam Note: Answer in kg wt: 10 sin 30°.
Question Practice 4. A vehicle of mass m is moving on a rough horizontal road with momentum P. If the coefficient of friction between the tyres and the road be μ, then the stopping distance is [CBSE PMT 2001]
(a) P/(2μmg) (b) P²/(2μmg) (c) P/(2μm²g) (d) P²/(2μm²g)
Solution. (d) Retardation a = μg; s = u²/(2a) = u²/(2μg). With u = P/m: s = P²/(2μm²g).
Teacher's Note: Stopping distance u²/(2μg); substitute u = P/m.
Exam Note: Convert velocity to momentum: u = P/m.
Question Practice 5. A box is lying on an inclined plane. What is the coefficient of static friction if the box starts sliding when an angle of inclination is 60° [KCET (Engg./Med.) 2000]
(a) 1.173 (b) 1.732 (c) 2.732 (d) 1.677
Solution. (b) μ = tan θ = tan 60° = 1.732.
Teacher's Note: Angle of repose equals angle of friction; μ = tan θ.
Exam Note: μ can exceed 1.
Question Practice 6. A brick of mass 2 kg begins to slide down on a plane inclined at an angle of 45° with the horizontal. The force of friction will be [CPMT 2000]
(a) 19.6 sin 45° (b) 19.6 cos 45° (c) 9.8 sin 45° (d) 9.8 cos 45°
Solution. (a) At the point of sliding, friction = mg sin 45° = 2 × 9.8 × sin 45° = 19.6 sin 45°.
Teacher's Note: At the verge of sliding, friction equals the weight component down the plane.
Exam Note: Use mg sin θ, with m = 2 kg.
Question Practice 7. To avoid slipping while walking on ice, one should take smaller steps because of the [BHU 1999]
(a) Friction of ice is large (b) Larger normal reaction (c) Friction of ice is small (d) Smaller normal reaction
Solution. (c) Friction of ice is small, so a small step keeps the required friction within the available limit.
Teacher's Note: Ice offers small friction, so keep horizontal push component small.
Exam Note: Cause is low μ of ice.
Question Practice 8. Two bodies having the same mass, 2 kg each have different surface areas 50 m² and 100 m² in contact with a horizontal plane. If the coefficient of friction is 0.2, the forces of friction that come into play when they are in motion will be in the ratio [EAMCET (Med.) 1999]
(a) 1 : 1 (b) 1 : 2 (c) 2 : 1 (d) 1 : 4
Solution. (a) Friction μmg does not depend on contact area; both bodies have the same μ and m, so the ratio is 1 : 1.
Teacher's Note: Friction is independent of apparent contact area.
Exam Note: Area is a distractor.
Question Practice 9. Starting from rest, a body slides down a 45° inclined plane in twice the time it takes to slide down the same distance in the absence of friction. The coefficient of friction between the body and the inclined plane is [CBSE PMT 1990]
(a) 0.33 (b) 0.25 (c) 0.75 (d) 0.80
Solution. (c) μ = tan θ(1 − 1/n²) = tan 45°(1 − 1/4) = 0.75.
Teacher's Note: Time doubled gives n = 2 in μ = tan θ(1 − 1/n²).
Exam Note: Substitute n = 2, tan 45° = 1.
Question Practice 10. Brakes of very small contact area are not used although friction is independent of area, because friction
(a) Resists motion (b) Causes wear and tear (c) Depends upon the nature of materials (d) Operating in this case is sliding friction
Solution. (b) A small contact area would give large pressure, causing excessive wear and tear of the brake.
Teacher's Note: Small area concentrates pressure and heat, wearing the brake quickly.
Exam Note: Area does not change friction but changes wear.
Question Practice 11. The angle between frictional force and the instantaneous velocity of the body moving over a rough surface is
(a) Zero (b) π/2 (c) π (d) Equal to the angle of friction
Solution. (c) Kinetic friction always opposes the motion, so it is directed opposite to the velocity: the angle is π.
Teacher's Note: Friction is antiparallel to the velocity of the sliding body.
Exam Note: Opposite direction means 180°.
Question Practice 12. What happens to the coefficient of friction, when the normal reaction is halved
(a) Halved (b) Doubled (c) No change (d) Depends on the nature of the surface
Solution. (c) The coefficient of friction depends only on the nature of the surfaces, not on the normal reaction; friction force halves but μ is unchanged.
Teacher's Note: μ depends on surface materials and condition only.
Exam Note: Force changes, coefficient does not.
Question Practice 13. What can be inferred regarding the limiting frictional force in the following four figures
(a) FA = FB = FC = FD (b) FA > FB > FC > FD (c) FA < FB < FC < FD (d) FA = FB < FC < FD
(Figure: four blocks A, B, C, D of different shapes, i.e. different contact areas, each of weight mg resting on the same horizontal surface with normal reaction R.)
Solution. (a) The blocks have the same weight, so the same normal reaction. Limiting friction μR does not depend on contact area, so all four are equal.
Teacher's Note: Limiting friction depends on R and μ, not on shape or area.
Exam Note: Same mg and same surface give equal friction.
Question Practice 14. A force of 98 Newton is required to drag a body of mass 100 kg on ice. The coefficient of friction will be
(a) 0.98 (b) 0.89 (c) 0.49 (d) 0.1
Solution. (d) μ = F/(mg) = 98/(100 × 9.8) = 0.1.
Teacher's Note: μ = F/R with R = mg.
Exam Note: Take g = 9.8 m/s².
Question Practice 15. A 60 kg body is pushed with just enough force to start it moving across a floor and the same force continues to act afterwards. The coefficients of static and sliding friction are 0.5 and 0.4 respectively. The acceleration of the body is
(a) 6 m/s² (b) 4.9 m/s² (c) 3.92 m/s² (d) 1 m/s²
Solution. (d) Force applied = μsmg. a = (μs − μk)g = (0.5 − 0.4) × 9.8 = 0.98 ≈ 1 m/s².
Teacher's Note: Acceleration is (μs − μk)g, independent of mass.
Exam Note: Mass 60 kg cancels out.
Question Practice 16. A particle is projected along a line of greatest slope up a rough plane inclined at an angle of 45° with the horizontal. If the coefficient of friction is 1/2, then the retardation is
(a) g/√2 (b) g/(2√2) (c) (g/√2)(1 + 1/2) (d) (g/√2)(1 − 1/2)
Solution. (c) Retardation a = g(sin θ + μ cos θ) = g(1/√2 + (1/2)(1/√2)) = (g/√2)(1 + 1/2).
Teacher's Note: Moving up, gravity component and friction both retard.
Exam Note: Add, not subtract, μ cos θ going up.
Question Practice 17. A block moves down a smooth inclined plane of inclination θ. Its velocity on reaching the bottom is v. If it slides down a rough inclined plane of same inclination its velocity on reaching the bottom is v/n, where n is a number greater than 0. The coefficient of friction μ is given by
(a) μ = tan θ(1 − 1/n²) (b) μ = cot θ(1 − 1/n²) (c) μ = tan θ(1 − 1/n²)1/2 (d) μ = cot θ(1 − 1/n²)1/2
(In the source the options for this question are labelled “18.”; the next printed question is numbered 19.)
Solution. (a) Smooth: v² = 2gs sin θ. Rough: v²/n² = 2gs(sin θ − μ cos θ). Dividing: 1/n² = 1 − μ cot θ, so μ = tan θ(1 − 1/n²).
Teacher's Note: Compare v² on smooth and rough planes with the same length.
Exam Note: Ratio of v² gives 1/n².
Question Practice 19. Consider a car moving along a straight horizontal road with a speed of 72 km/hr. If the coefficient of static friction between the tyres and the road is 0.5, the shortest distance in which the car can be stopped is (g = 10 m/s²)
(a) 30 m (b) 40 m (c) 72 m (d) 20 m
Solution. (b) v = 72 km/h = 20 m/s. s = v²/(2μg) = 400/(2 × 0.5 × 10) = 40 m.
Teacher's Note: Convert 72 km/h to 20 m/s; use s = v²/(2μg).
Exam Note: Always convert km/h to m/s first.
Question Practice 20. All the surfaces shown in the figure are rough. The direction of friction on B due to A is
(a) Zero (b) To the left (c) Upwards (d) Downwards
(Figure: block A against a vertical wall; a smaller block B on the right face of A is pressed towards A by a horizontal force F directed to the left.)
Solution. (c) The weight of B acts downward; for B to stay on A, A must exert friction on B upwards.
Teacher's Note: Friction on B must balance its weight, so it points upward.
Exam Note: Friction opposes B's tendency to slide down.
Question Practice 21. A body of mass M just starts sliding down an inclined plane (rough) with inclination θ, such that tan θ = 1/3. The force acting on the body down the plane in this position is
(a) Mg (b) Mg/3 (c) Mg/3 (d) Mg/√10
(Options (b) and (c) are printed in the source as shown; (b) and (c) appear to be both Mg/3 in the scan.)
Solution. (d) tan θ = 1/3 gives sin θ = 1/√10. The force acting down the plane is the weight component Mg sin θ = Mg/√10.
Teacher's Note: tan θ = 1/3 gives sin θ = 1/√10 (3-1-√10 triangle).
Exam Note: Build the right triangle for sin θ.
Advance Level
Question Practice 22. Consider the following statements. Assertion (A): It is difficult to move a cycle along the road with its brakes on. Reason (R): Sliding friction is greater than rolling friction. Of these statements [AIIMS 2002]
(a) Both A and R are true and the R is a correct explanation of the A (b) Both A and R are true but the R is not a correct explanation of the A (c) A is true but the R is false (d) Both A and R are false (e) A is false but the R is true
Solution. (a) With brakes on the wheels slide instead of roll, and sliding friction is greater than rolling friction, so A and R are true and R explains A.
Teacher's Note: Braked wheels slide; sliding friction exceeds rolling friction.
Exam Note: Reason directly explains assertion.
Question Practice 23. A body is sliding down an inclined plane having coefficient of friction 0.5. If the normal reaction is twice that of the resultant downward force along the incline, the angle between the incline and the horizontal is [EAMCET (Engg.) 2000]
(a) 15° (b) 30° (c) 45° (d) 60°
Solution. (c) Resultant downward force = mg sin θ − μmg cos θ. Given R = mg cos θ = 2(mg sin θ − 0.5 mg cos θ) ⇒ 2 cos θ = 2 sin θ ⇒ tan θ = 1 ⇒ θ = 45°.
Teacher's Note: Resultant down-slope force is mg sin θ − μmg cos θ, not just the weight component.
Exam Note: Use net force including friction.
Question Practice 24. A block of mass 2 kg rests on a rough inclined plane making an angle of 30° with the horizontal. The coefficient of static friction between the block and the plane is 0.7. The frictional force on the block is [IIT-JEE 1980]
(a) 9.8 N (b) 0.7 × 9.8 × √3 N (c) 9.8 × √3 N (d) 0.7 × 9.8 N
Solution. (a) Block is at rest, so friction = mg sin 30° = 2 × 9.8 × ½ = 9.8 N (limiting friction 0.7 × 2 × 9.8 × cos 30° = 11.9 N is larger).
Teacher's Note: Block at rest: friction equals mg sin θ, not the limiting value.
Exam Note: Compare mg sin θ with μmg cos θ first.
Question Practice 25. A body of weight W is lying at rest on a rough horizontal surface. If the angle of friction is θ, then the minimum force required to move the body along the surface will be
(a) W tan θ (b) W cos θ (c) W sin θ (d) W cos θ
Solution. (c) Corrected: the printed answer sheet gives (a) W tan θ, which is only the force needed when pulling horizontally; the minimum over all directions is W sin θ (c). The minimum force is applied at an angle equal to the angle of friction: Pmin = μW/√(1 + μ²) = W tan θ cos θ = W sin θ.
Teacher's Note: Pull at the angle of friction to minimise force.
Exam Note: Not W tan θ; that is horizontal pull.
Question Practice 26. A block of mass M is placed on a rough horizontal surface as shown in the figure. A force F = Mg acts on the block. It is inclined to the vertical at an angle θ. The coefficient of friction is μ. The block can be pushed along the surface only when
(a) tan θ ≥ μ (b) cot θ ≥ μ (c) tan(θ/2) ≥ μ (d) cot(θ/2) ≥ μ
(Figure: block M on a rough floor; force F = Mg pushes it, directed downward at angle θ to the vertical.)
Solution. (c) Horizontal component Mg sin θ must be at least friction μ(Mg + Mg cos θ). So sin θ ≥ μ(1 + cos θ) ⇒ 2 sin(θ/2)cos(θ/2) ≥ μ·2cos²(θ/2) ⇒ tan(θ/2) ≥ μ.
Teacher's Note: Pushing downward adds Mg cos θ to the normal reaction, so use (1 + cos θ).
Exam Note: Pushing gives tan(θ/2); pulling gives cot(θ/2).
Question Practice 27. A plane is inclined at an angle θ with the horizontal. A body of mass m rests on it. If the coefficient of friction is μ, then the minimum force that has to be applied parallel to the inclined plane to make the body just move up the inclined plane is
(a) mg sin θ (b) μmg cos θ (c) μmg cos θ − mg sin θ (d) μmg cos θ + mg sin θ
Solution. (d) F = mg sin θ + μmg cos θ.
Teacher's Note: Up the plane: weight component plus friction.
Exam Note: Both act down the slope.
Question Practice 28. A block of mass m is placed on another block of mass M which itself is lying on a horizontal surface. The coefficient of friction between the two blocks is μ1 and that between the block of mass M and horizontal surface is μ2. What maximum horizontal force can be applied to the lower block so that the two blocks move without separation
(a) (M + m)(μ2 − μ1)g (b) (M − m)(μ2 − μ1)g (c) (M − m)(μ2 + μ1)g (d) (M + m)(μ2 + μ1)g
Solution. (d) Upper block can have at most a = μ1g. For the whole system F − μ2(M + m)g = (M + m)μ1g ⇒ F = (M + m)(μ1 + μ2)g.
Teacher's Note: Maximum common acceleration is μ1g, set by friction on the upper block.
Exam Note: Add floor friction to (M+m)μ1g.
Question Practice 29. A block of mass M1 is placed on a slab of mass M2. The slab lies on a frictionless horizontal surface. The coefficient of static friction between the block and slab is μs and that of dynamic friction is μk. A force F acts on the block M1. Take g = 10 m s−2. If M1 = 10 kg, M2 = 30 kg, μs = 0.5, μk = 0.15 and F = 40 N, what will be the acceleration with which the slab will move
(a) 5 m s−2 (b) 2 m s−2 (c) 1 m s−2 (d) Zero
Solution. (c) Maximum friction = 0.5 × 10 × 10 = 50 N. If together, a = 40/(10 + 30) = 1 m/s²; friction needed on slab = 30 × 1 = 30 N < 50 N, so they move together and the slab accelerates at 1 m/s².
Teacher's Note: Check that required friction on the slab is below the static limit.
Exam Note: Test no-slip condition before using μk.
Question Practice 30. In the above problem if F = 100 N, what will be the acceleration with which the slab will move
(a) 5 m s−2 (b) 2 m s−2 (c) 1 m s−2 (d) None of these
Solution. (d) Together a would be 100/40 = 2.5 m/s², needing 75 N friction on the slab, which exceeds 50 N, so the block slips. Kinetic friction = 0.15 × 10 × 10 = 15 N acts on the slab: a = 15/30 = 0.5 m/s² (not among (a)-(c)).
Teacher's Note: When slipping, the slab is driven only by kinetic friction on it.
Exam Note: Slab acceleration = μk M1 g / M2.
Question Practice 31. A block X of mass 4 kg is lying on another block Y of mass 8 kg. As shown in the figure. When the force acting on X is 12 N, block X is on the verge of slipping on Y. The force F in Newton necessary to make both X and Y move simultaneously will be
(a) 36 (b) 3.6 (c) 0.36 (d) 3.6
(Figure: X on Y on a smooth table; F pulls Y horizontally.)
Solution. (a) Limiting friction between X and Y is 12 N. With F on Y, common acceleration = F/12 and X needs 4 × F/12 = 12 ⇒ F = 36 N.
Teacher's Note: Limiting friction 12 N caps the common acceleration of X at 3 m/s².
Exam Note: Total mass 12 kg times a = 3.
Question Practice 32. Two masses 10 kg and 5 kg are connected by a string passing over a pulley as shown. If the coefficient of friction be 0.15, then the minimum weight that may be placed on 10 kg to stop motion is
(a) 18.7 kg (b) 23.3 kg (c) 32.5 kg (d) 44.3 kg
(Figure: 10 kg block on a horizontal table, extra mass on top of it, joined over a pulley to the 5 kg mass hanging.)
Solution. (b) No motion requires 5g = μ(10 + m)g ⇒ 5 = 0.15(10 + m) ⇒ m = 33.3 − 10 = 23.3 kg.
Teacher's Note: Hanging weight equals limiting friction on the total mass on the table.
Exam Note: Remember to subtract the 10 kg.
Question Practice 33. Two blocks of mass M1 and M2 are connected with a string which passes over a smooth pulley. The mass M1 is placed on a rough inclined plane as shown in the figure. The coefficient of friction between the block and the inclined plane is μ. What should be the maximum mass M2 so that block M1 slides downwards
(a) M2 = M1(sin θ + μ cos θ) (b) M2 = M1(sin θ − μ cos θ) (c) M2 = M1/(sin θ + μ cos θ) (d) M2 = M1/(sin θ − μ cos θ)
Solution. (b) M1 slides down if M1g sin θ − μM1g cos θ ≥ M2g, so the maximum is M2 = M1(sin θ − μ cos θ).
Teacher's Note: For M1 to slide down, its net down-slope force must exceed M2g.
Exam Note: Friction opposes sliding down, so subtract.
Question Practice 34. A car starts from rest to cover a distance s. The coefficient of friction between the road and the tyres is μ. The minimum time in which the car can cover the distance is proportional to
(a) μ (b) √μ (c) 1/μ (d) 1/√μ
Solution. (d) Maximum acceleration a = μg. s = ½at² ⇒ t = √(2s/(μg)), so t ∝ 1/√μ.
Teacher's Note: Friction limits acceleration to μg; then t = √(2s/a).
Exam Note: Time varies inversely as √μ.
Question Practice 35. An engine of mass 50,000 kg pulls a coach of mass 40,000 kg. If there is a resistance of 1 N per 100 kg acting on both the engine and the coach, and if the driving force of the engine be 4,500 N, then the acceleration of the engine is
(a) 0.08 m/s² (b) Zero (c) 0.04 m/s² (d) None of these
Solution. (c) Total resistance = (90,000/100) × 1 = 900 N. a = (4500 − 900)/90,000 = 0.04 m/s².
Teacher's Note: Treat engine plus coach as one system with total resistance 900 N.
Exam Note: Resistance scales with each mass.
Question Practice 36. In the above question, then tension in the coupling is
(a) 2,000 N (b) 1,500 N (c) 500 N (d) 1000 N
Solution. (a) For the coach: T − 400 = 40,000 × 0.04 = 1600 ⇒ T = 2000 N.
Teacher's Note: Coach alone: tension covers its resistance 400 N and its acceleration.
Exam Note: Apply F = ma to the coach only.
Question Practice 37. An aeroplane requires for take off a speed of 72 km/h. The run of the ground is 100 m. The mass of the plane is 104 kg and the coefficient of friction between the plane and the ground is 0.2. The plane accelerates uniformly during take off. What is the acceleration of the plane
(a) 1 m/s² (b) 2 m/s² (c) 3 m/s² (d) 4 m/s²
Solution. (b) v = 72 km/h = 20 m/s. v² = 2as ⇒ a = 400/(2 × 100) = 2 m/s².
Teacher's Note: Kinematics gives acceleration directly; mass and μ are not needed.
Exam Note: Convert 72 km/h to 20 m/s.
Question Practice 38. The force required to just move a body up an inclined plane is double the force required to just prevent it from sliding down. If φ is angle of friction and θ is the angle which incline makes with the horizontal then
(a) tan θ = tan φ (b) tan θ = 2 tan φ (c) tan θ = 3 tan φ (d) tan φ = 3 tan θ
Solution. (c) Up: F1 = mg(sin θ + μ cos θ). Prevent sliding down: F2 = mg(sin θ − μ cos θ). F1 = 2F2 ⇒ sin θ = 3μ cos θ ⇒ tan θ = 3 tan φ.
Teacher's Note: Two limiting forces differ only in the sign of the friction term.
Exam Note: Set F1 = 2F2 and simplify.
Question Practice 39. A body is on a rough horizontal plane. A force is applied to the body directed towards the plane at an angle φ with the vertical. If θ is the angle of friction then for the body to move along the plane
(a) φ > θ (b) φ < θ (c) φ = θ (d) φ can take up any value
Solution. (a) Horizontal component F sin φ must exceed μ(W + F cos φ). For large F this needs sin φ > μ cos φ, i.e. tan φ > tan θ, so φ > θ.
Teacher's Note: Pushing at a small angle to the vertical just increases normal reaction.
Exam Note: Compare tan φ with μ = tan θ.
Question Practice 40. In the arrangement shown W1 = 200 N, W2 = 100 N, μ = 0.25 for all surfaces in contact. The block W1 just slides under the block W2.
(a) A pull of 50 N is to be applied on W1 (b) A pull of 90 N is to be applied on W1 (c) Tension in the string AB is 10√2 N (d) Tension in the string AB is 20√2 N
(Figure: W2 rests on W1; a string AB runs from W2 at 45° up to a wall; W1 is pulled horizontally.)
Solution. (b, d) For W2 (string at 45°, T upward component T sin 45°): T cos 45° = 0.25(100 − T sin 45°) ⇒ T = 20√2 N, so N2 = 100 − 20 = 80 N. On W1: pull = 0.25 × 80 (from W2) + 0.25 × (200 + 80) (from floor) = 20 + 70 = 90 N. So (b) and (d) are correct.
Teacher's Note: Write both friction forces on W1: from W2 and from the floor.
Exam Note: Two options are correct here.
Question Practice 41. A board of mass m is placed on the floor and a man of mass M is standing on the board as shown. The coefficient of friction between the board and the floor is μ. The maximum force that the man can exert on the rope so that the board does not slip on the floor is
(a) F = μ(M + m)g (b) F = μmg (c) F = μMg/(μ + 1) (d) F = μ(M + m)g/(μ + 1)
(Figure: man standing on a board pulls a rope that runs over fixed pulleys and is attached horizontally to the board.)
Solution. (d) The rope pulls the man up with F, so the floor normal reaction is (M + m)g − F. The rope pulls the board horizontally with F ≤ μ[(M + m)g − F] ⇒ F ≤ μ(M + m)g/(1 + μ).
Teacher's Note: Rope pulls man up, reducing normal reaction on the floor.
Exam Note: Normal reaction is (M+m)g − F, not (M+m)g.
Question Practice 42. A body slides over an inclined plane forming an angle of 45° with the horizontal. The distance x travelled by the body in time t is described by the equation x = kt², where k = 1.732. The coefficient of friction between the body and the plane has a value
(a) μ = 0.5 (b) μ = 1 (c) μ = 0.25 (d) μ = 0.75
Solution. (a) x = kt² gives a = 2k = 3.464 m/s². a = g(sin 45° − μ cos 45°) = (g/√2)(1 − μ), with g = 9.8: 3.464 = 6.93(1 − μ) ⇒ μ = 0.5.
Teacher's Note: Compare x = kt² with ½at² to get a = 2k.
Exam Note: Use a = g(sin θ − μ cos θ).
Question Practice 43. Two blocks A and B of masses m and M respectively are placed on each other and their combination rests on a fixed horizontal surface C. A light string passing over the smooth light pulley is used to connect A and B as shown. The coefficient of sliding friction between all surfaces in contact is μ. If A is dragged with a force F then for both A and B to move with a uniform speed we have
(a) F = μ(M + m)g (b) F = μmg (c) F = μ(3M + m)g (d) F = μ(3m + M)g
(Figure: A on top of B on a fixed horizontal surface; a string joins A and B over a pulley fixed to a wall; F pulls A.)
Solution. (d) Uniform speed: for A, F = T + μmg. For B, T = μmg (from A) + μ(M + m)g (from floor). So F = 3μmg + μMg = μ(3m + M)g.
Teacher's Note: Count three friction forces: A-B on A, A-B on B, floor on B.
Exam Note: Same tension T acts on A and B.
Question Practice 44. A force of 100 N is applied on a block of mass 3 kg as shown in figure. The coefficient of friction between the surface of the block is 1/4. The friction force acting on the block is
(a) 15 N downwards (b) 25 N upwards (c) 20 N downwards (d) 20 N upwards
(Figure: block of mass 3 kg touching a vertical wall; force F = 100 N pushes it into the wall, directed upward at an angle to the horizontal. The angle is not printed in the scan; the answer corresponds to cos α = 0.8, i.e. 37°.)
Solution. (c) Taking the force at 37° to the horizontal: N = 100 cos 37° = 80 N, limiting friction = ¼ × 80 = 20 N. Upward component = 60 N exceeds weight 30 N, and the block would need 30 N of friction to stay, more than 20 N, so it slides up and kinetic friction of 20 N acts downwards.
Teacher's Note: Check whether needed friction exceeds μN before choosing static or limiting value.
Exam Note: Friction opposes the tendency to slide up.
Free study material for Physics
Download Pradeep's KL Gogia Solutions for Class 11 Math PDF
Download Pradeep's KL Gogia Solutions for Class 11
Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Physics Chapter 8 Laws Of Motion Part 2 tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Concept-Driven Math Answers
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Additional Study Materials for 2026
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.