Pradeep's KL Gogia Solutions Physics Chapter 8 Laws Of Motion Part 1

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Physics Chapter 08 Laws Of Motion

Access comprehensive textbook solutions for Chapter 08 Laws Of Motion using the Pradeep's KL Gogia reference material for Class 11 Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 08 Laws Of Motion Textbook Solutions PDF

View or download the dedicated Chapter 08 Laws Of Motion solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.

Chapter 8. Laws of Motion - Part 1

Sample problems based on Newton's first law

Question 1. When a bus suddenly takes a turn, the passengers are thrown outwards because of [AFMC 1999; CPMT 2000, 2001]
(a) Inertia of motion
(b) Acceleration of motion
(c) Speed of motion
(d) Both (b) and (c)

Solution. (a)

Teacher's Note: Passengers tend to keep moving in a straight line (inertia of direction) while the bus turns.

Exam Note: Name the inertia type; one-line reason earns the mark.

Question 2. A person sitting in an open car moving at constant velocity throws a ball vertically up into air. The ball falls [EAMCET (Med.) 1995]
(a) Outside the car
(b) In the car ahead of the person
(c) In the car to the side of the person
(d) Exactly in the hand which threw it up

Solution. (d). Because the horizontal components of velocity are the same for the car and the ball, they cover equal horizontal distances in the given time interval.

Teacher's Note: Ball shares the car's horizontal velocity, so it stays above the hand.

Exam Note: Use frames: relative to the car the ball moves only vertically.

Sample problems based on Newton's second law

Question 3. A train is moving with velocity 20 m/sec. on this, dust is falling at the rate of 50 kg/min. The extra force required to move this train with constant velocity will be [RPET 1999]
(a) 16.66 N
(b) 1000 N
(c) 166.6 N
(d) 1200 N

Solution. (a). Force F = v (dm/dt) = 20 × 50/60 = 16.66 N

Teacher's Note: Mass changes, so use F = v·dm/dt; convert kg/min to kg/s.

Exam Note: Convert minutes to seconds first; common slip is 1000 N.

Question 4. A force of 10 Newton acts on a body of mass 20 kg for 10 seconds. Change in its momentum is [MP PET 2002]
(a) 5 kg m/s
(b) 100 kg m/s
(c) 200 kg m/s
(d) 1000 kg m/s

Solution. (b). Change in momentum = F × t = 10 × 10 = 100 kg m/s.

Teacher's Note: Impulse equals change in momentum; mass is a distractor.

Exam Note: Δp = F·t; ignore the given mass.

Question 5. (Question statement is not printed in the source book; solution given below.)

Solution. (a). Force = m dv/dt = 100(0 − 5)/0.1, so F = −5000 (as printed in the book).

Teacher's Note: Force equals mass times rate of change of velocity; negative sign shows retarding force.

Exam Note: Substitute carefully; keep the sign and units.

Sample problems based on force and equilibrium

Question 6. Three forces start acting simultaneously on a particle moving with velocity v. These forces are represented in magnitude and direction by the three sides of a triangle ABC (as shown). The particle will now move with velocity
(a) v remaining unchanged
(b) Less than v
(c) Greater than v
(d) v in the direction of the largest force BC

Solution. (a). The three forces are in equilibrium, i.e. the net force is zero. It means the particle will move with the same velocity.

Teacher's Note: Forces forming a closed triangle in order sum to zero, so no acceleration.

Exam Note: State: net force zero, hence constant velocity.

Question 7. Two forces are such that the sum of their magnitudes is 18 N and their resultant is perpendicular to the smaller force and magnitude of resultant is 12. Then the magnitudes of the forces are [AIEEE 2002]
(a) 12 N, 6 N
(b) 13 N, 5 N
(c) 10 N, 8 N
(d) 16 N, 2 N

Solution. (b). Let the two forces be F1 and F2 (F1 < F2). F1 + F2 = 18 ...(i)
The angle between F1 and the resultant R is 90°, so tan 90° = F2 sin θ/(F1 + F2 cos θ) = ∞, giving F1 + F2 cos θ = 0, i.e. cos θ = −F1/F2 ...(ii)
R2 = F12 + F22 + 2F1F2 cos θ, so 144 = F12 + F22 + 2F1F2 cos θ ...(iii)
Solving (i), (ii), (iii): F1 = 5 N and F2 = 13 N.

Teacher's Note: Perpendicular resultant means the denominator of the angle formula is zero; then R² = F2² − F1².

Exam Note: Quick check: 13² − 5² = 144, so R = 12.

Question 8. The resultant of two forces, one double the other in magnitude, is perpendicular to the smaller of the two forces. The angle between the two forces is [KCET (Engg./Med.) 2002]
(a) 60°
(b) 120°
(c) 150°
(d) 90°

Solution. (b). Let the forces be F and 2F, with angle θ between them, and the resultant making angle α with F. tan α = 2F sin θ/(F + 2F cos θ) = tan 90° = ∞, so F + 2F cos θ = 0, cos θ = −1/2, θ = 120°.

Teacher's Note: Resultant perpendicular to F gives F + 2F cos θ = 0, so cos θ = −1/2.

Exam Note: Set the denominator of tan α to zero.

Question 9. A weightless ladder, 20 ft long rests against a frictionless wall at an angle of 60° with the horizontal. A 150 pound man is 4 ft from the top of the ladder. A horizontal force is needed to prevent it from slipping. Choose the correct magnitude from the following [CBSE PMT 1998]
(a) 175 lb
(b) 100 lb
(c) 70 lb
(d) 150 lb

Solution. (c). The system is in equilibrium, so ΣFx = 0 and ΣFy = 0, hence F = R2 and W = R1.
Taking moments about point B: F·(BC) + W·(EC) = R1·(AC) with EC = 4 cos 60°:
F(20 sin 60°) + W(4 cos 60°) = R1(20 cos 60°), i.e. 10√3 F + 2W = 10R1.
As R1 = W, F = 8W/(10√3) = 8 × 150/(10√3) ≈ 70 lb.

Teacher's Note: Take torques about the ladder foot; friction at the ground supplies F, wall reaction is horizontal.

Exam Note: Choose the pivot to remove unknowns; answer 69.3 ≈ 70 lb.

Question 10. A mass M is suspended by a rope from a rigid support at P as shown in the figure. Another rope is tied at the end Q, and it is pulled horizontally with a force F. If the rope PQ makes angle θ with the vertical then the tension in the string PQ is
(a) F sin θ
(b) F/sin θ
(c) F cos θ
(d) F/cos θ

Solution. (b). For horizontal equilibrium T sin θ = F, therefore T = F/sin θ. (Figure: free-body diagram of Q with T along PQ, components T sin θ horizontal and T cos θ vertical, force F horizontal and weight mg downward.)

Teacher's Note: Resolve T at Q: horizontal component balances F.

Exam Note: Resolve along horizontal and vertical axes separately.

Question 11. A spring balance A shows a reading of 2 kg, when an aluminium block is suspended from it. Another balance B shows a reading of 5 kg, when a beaker full of liquid is placed in its pan. The two balances are arranged such that the Al-block is completely immersed inside the liquid as shown in the figure. Then [IIT-JEE]
(a) The reading of the balance A will be more than 2 kg
(b) The reading of the balance B will be less than 5 kg
(c) The reading of the balance A will be less than 2 kg and that of B will be more than 5 kg
(d) The reading of balance A will be 2 kg and that of B will be 5 kg

Solution. (c). Due to the buoyant force on the aluminium block the reading of spring balance A will be less than 2 kg, but it increases the reading of balance B.

Teacher's Note: Buoyancy lifts the block (A reads less); its reaction pushes the liquid down (B reads more).

Exam Note: Apply Newton's third law to the buoyant force.

Question 12. In the following diagram, pulley P1 is movable and pulley P2 is fixed. The value of angle θ will be
(a) 60°
(b) 30°
(c) 45°
(d) 15°

Solution. (b). Free body diagram of pulley P1: for horizontal equilibrium T1 cos θ = T2 cos θ, so T1 = T2, and T1 = T2 = W.
For vertical equilibrium T1 sin θ + T2 sin θ = W, so W sin θ + W sin θ = W, sin θ = 1/2, θ = 30°.

Teacher's Note: One string over the pulleys carries the same tension W throughout; vertical components of two strands balance W.

Exam Note: Same string means equal tensions; then 2 sin θ = 1.

Question 13. In the following figure, the pulley is massless and frictionless. The relation between T1, T2 and T3 will be
(a) T1 = T2 ≠ T3
(b) T1 ≠ T2 = T3
(c) T1 ≠ T2 ≠ T3
(d) T1 = T2 = T3

Solution. (d). Since a single string whole system is attached, W2 = T3 = T2 = T1.

Teacher's Note: A massless string over a frictionless pulley carries the same tension everywhere.

Exam Note: Cite 'single string, massless frictionless pulley'.

Question 14. In the above problem (13), the relation between W1 and W2 will be
(a) W2 = W1/(2 cos θ)
(b) 2 W2 cos θ
(c) W2 = W1
(d) W2 = 2 cos θ/W1

Solution. (a). For vertical equilibrium T1 cos θ + T2 cos θ = W1 [as T1 = T2 = W2], so 2W2 cos θ = W1, therefore W2 = W1/(2 cos θ).

Teacher's Note: Both strands pull up at angle θ with tension W2, so 2W2 cos θ balances W1.

Exam Note: Show vertical resolution, then the result.

Question 15. In the following figure the masses of the blocks A and B are same and each equal to m. The tensions in the strings OA and AB are T2 and T1 respectively. The system is in equilibrium with a constant horizontal force mg on B. The T1 is
(a) mg
(b) √2 mg
(c) √3 mg
(d) √5 mg

Solution. (b). From the free body diagram of block B: T1 cos θ1 = mg ...(i) and T1 sin θ1 = mg ...(ii) (the book writes −mg, taking the opposite sense). Squaring and adding: T12(sin2θ1 + cos2θ1) = 2(mg)2, so T1 = √2 mg.

Teacher's Note: Block B: vertical component of T1 balances weight, horizontal component balances mg.

Exam Note: Square and add to eliminate θ1.

Question 16. In the above problem (15), the angle θ1 is
(a) 30°
(b) 45°
(c) 60°
(d) tan−1(1/2)

Solution. (b). From the solution of (15), dividing equation (ii) by equation (i): T1 sin θ1/T1 cos θ1 = mg/mg, so tan θ1 = 1 and θ1 = 45°.

Teacher's Note: Dividing the two equilibrium equations removes T1 and gives tan θ1 directly.

Exam Note: Divide equations to eliminate the tension.

Question 17. In the above problem (15) the tension T2 will be
(a) mg
(b) √2 mg
(c) √3 mg
(d) √5 mg

Solution. (d). From the free body diagram of block A: for vertical equilibrium T2 cos θ2 = mg + T1 cos θ1 = mg + √2 mg cos 45° = 2mg ...(i). For horizontal equilibrium T2 sin θ2 = T1 sin θ1 = √2 mg sin 45° = mg ...(ii). Squaring and adding: T22 = 5(mg)2, so T2 = √5 mg.

Teacher's Note: Block A carries its own weight plus the pull of string AB downward.

Exam Note: Resolve for block A; use T1 = √2 mg from earlier.

Question 18. In the above problem (15) the angle θ2 will be
(a) 30°
(b) 45°
(c) 60°
(d) tan−1(1/2)

Solution. (d). From the solution of (17), dividing equation (ii) by equation (i): tan θ2 = mg/2mg = 1/2, so θ2 = tan−1(1/2).

Teacher's Note: Ratio of horizontal to vertical components of T2 gives tan θ2 = 1/2.

Exam Note: Divide the two component equations.

Question 19. A man of mass m stands on a crate of mass M. He pulls on a light rope passing over a smooth light pulley. The other end of the rope is attached to the crate. For the system to be in equilibrium, the force exerted by the men on the rope will be
(a) (M + m)g
(b) (1/2)(M + m)g
(c) Mg
(d) mg

Solution. (b). From the free body diagram of the man and crate system, for vertical equilibrium 2T = (M + m)g, therefore T = (M + m)g/2.

Teacher's Note: Two rope segments support the combined man-plus-crate weight, so each carries half.

Exam Note: Treat man and crate as one system.

Question 20. Two forces, with equal magnitude F, act on a body and the magnitude of the resultant force is F/3. The angle between the two forces is
(a) cos−1(−17/18)
(b) cos−1(−1/3)
(c) cos−1(2/3)
(d) cos−1(8/9)

Solution. (a). Resultant of two vectors A and B at angle θ: R = √(A2 + B2 + 2AB cos θ). With A = B = F and R = F/3: (F/3)2 = F2 + F2 + 2F2 cos θ, so F2/9 = 2F2 + 2F2 cos θ, giving cos θ = −17/18 and θ = cos−1(−17/18).

Teacher's Note: Square the resultant formula with equal magnitudes; obtuse angle expected for small resultant.

Exam Note: Cancel F² early to avoid arithmetic slips.

Question 21. A cricket ball of mass 150 gm is moving with a velocity of 12 m/s and is hit by a bat so that the ball is turned back with a velocity of 20 m/s. The force of blow acts for 0.01 s on the ball. The average force exerted by the bat on the ball is
(a) 480 N
(b) 600 N
(c) 500 N
(d) 400 N

Solution. (a). v1 = −12 m/s and v2 = +20 m/s [because direction is reversed]; m = 150 gm = 0.15 kg, t = 0.01 s. Force exerted by the bat on the ball F = m(v2 − v1)/t = 0.15[20 − (−12)]/0.01 = 480 N.

Teacher's Note: Reversal of direction means velocity change is 20 + 12 = 32 m/s, not 8.

Exam Note: Take opposite signs for reversed velocity; convert grams to kg.

Sample problems based on Newton's third law

Question 22. You are on a frictionless horizontal plane. How can you get off if no horizontal force is exerted by pushing against the surface
(a) By jumping
(b) By splitting or sneezing
(c) By rolling your body on the surface
(d) By running on the plane

Solution. (b). By doing so we can get push in backward direction in accordance with Newton's third law of motion.

Teacher's Note: Without friction only expelling matter backward gives a forward reaction.

Exam Note: Cite action-reaction; momentum conservation also works.

Sample problem based on Impulse

Question 23. A ball of mass 150 g moving with an acceleration 20 m/s2 is hit by a force, which acts on it for 0.1 sec. The impulsive force is [AFMC 1999]
(a) 0.5 N-s
(b) 0.1 N-s
(c) 0.3 N-s
(d) 1.2 N-s

Solution. (c). Impulsive force = force × time = m a × t = 0.15 × 20 × 0.1 = 0.3 N-s.

Teacher's Note: Impulse = F·t with F = ma; convert 150 g to 0.15 kg.

Exam Note: Convert grams to kg before multiplying.

Question 24. A force of 50 dynes is acted on a body of mass 5 g which is at rest for an interval of 3 seconds, then impulse is
(a) 0.15 × 10−3 N-s
(b) 0.98 × 10−3 N-s
(c) 1.5 × 10−3 N-s
(d) 2.5 × 10−3 N-s

Solution. (c). Impulse = force × time = 50 × 10−5 × 3 = 1.5 × 10−3 N-s.

Teacher's Note: 1 dyne = 10−5 N; mass of the body is not needed for impulse.

Exam Note: Convert dyne to newton; mass is a distractor.

Question 25. The force-time (F − t) curve of a particle executing linear motion is as shown in the figure. The momentum acquired by the particle in time interval from zero to 8 second will be
(a) −2 N-s
(b) +4 N-s
(c) 6 N-s
(d) Zero

Solution. (d). Momentum acquired by the particle is numerically equal to the area enclosed by the force-time curve and the time axis. For the given diagram the area in the upper half is positive and in the lower half is negative (and equal to the upper half). So the net area is zero. Hence the momentum acquired by the particle will be zero. (Figure: force varies between +2 N and −2 N as a smooth wave over 0 to 8 s, with equal areas above and below the time axis.)

Teacher's Note: Impulse is the signed area under the F-t graph; equal positive and negative lobes cancel.

Exam Note: Count area below the axis as negative.

Sample problems based on conservation of momentum

Question 26. A wagon weighing 1000 kg is moving with a velocity 50 km/h on smooth horizontal rails. A mass of 250 kg is dropped into it. The velocity with which it moves now is
(a) 12.5 km/hour
(b) 20 km/hour
(c) 40 km/hour
(d) 50 km/hour

Solution. (c). Initial momentum of the wagon = 1000 × 50 kg km/h. When 250 kg is dropped in, the new mass of the system = 1000 + 250 = 1250 kg. By conservation of linear momentum, initial momentum = final momentum: 1000 × 50 = 1250 × v, so v = 50,000/1250 = 40 km/h.

Teacher's Note: Smooth rails mean no external horizontal force, so momentum is conserved.

Exam Note: Units can stay in km/h; the ratio of masses decides.

Question 27. The kinetic energy of two masses m1 and m2 are equal. The ratio of their linear momentum will be [RPET 1988]
(a) m1/m2
(b) m2/m1
(c) √(m1/m2)
(d) √(m2/m1)

Solution. (c). Relation between linear momentum (P), mass (m) and kinetic energy (E): P = √(2mE), so P ∝ √m [as E is constant], therefore P1/P2 = √(m1/m2).

Teacher's Note: Use p = √(2mE); equal energy means momentum varies as the square root of mass.

Exam Note: Quote p = √(2mE) and substitute.

Question 28. Which of the following has the maximum momentum
(a) A 100 kg vehicle moving at 0.02 m s−1
(b) A 4 g weight moving at 10000 cm s−1
(c) A 200 g weight moving with kinetic energy 10−6 J
(d) A 20 g weight after falling 1 kilometre

Solution. (d). Momentum of body for given options: (a) P = mv = 100 × 0.02 = 2 kg m/s; (b) P = mv = 4 × 10−3 × 100 = 0.4 kg m/s; (c) P = √(2mE) = √(2 × 0.2 × 10−6) = 6.3 × 10−4 kg m/s; (d) P = m√(2gh) = 20 × 10−3 × √(2 × 10 × 103) = 2.82 kg m/s. So for option (d) momentum is maximum.

Teacher's Note: Convert every option to SI and compare; falling 1 km gives about 140 m/s.

Exam Note: Convert to SI before comparing; check g = 10.

Question 29. A rocket with a lift-off mass 3.5 × 104 kg is blasted upwards with an initial acceleration of 10 m/s2. Then the initial thrust of the blast is
(a) 1.75 × 105 N
(b) 3.5 × 105 N
(c) 7.0 × 105 N
(d) 14.0 × 105 N

Solution. (c). Initial thrust on the rocket F = m(g + a) = 3.5 × 104(10 + 10) = 7.0 × 105 N.

Teacher's Note: Thrust must overcome weight and also give acceleration a, so F = m(g + a).

Exam Note: Remember to add g; taking g = 10 m/s².

Question 30. In a rocket of mass 1000 kg fuel is consumed at a rate of 40 kg/s. The velocity of the gases ejected from the rocket is 5 × 104 m/s. The thrust on the rocket is
(a) 2 × 103 N
(b) 5 × 104 N
(c) 2 × 106 N
(d) 2 × 109 N

Solution. (c). Thrust on the rocket F = u(dm/dt) = 5 × 104 × 40 = 2 × 106 N.

Teacher's Note: Thrust equals exhaust speed times fuel burn rate; rocket mass is not needed.

Exam Note: Use F = u·dm/dt.

Question 31. If the force on a rocket moving with a velocity of 300 m/s is 210 N, then the rate of combustion of the fuel is
(a) 0.7 kg/s
(b) 1.4 kg/s
(c) 0.07 kg/s
(d) 10.7 kg/s

Solution. (a). Force on the rocket = u(dm/dt), therefore rate of combustion of fuel dm/dt = F/u = 210/300 = 0.7 kg/s.

Teacher's Note: Rearrange thrust formula; the given velocity is used as exhaust speed.

Exam Note: Divide force by speed; check units give kg/s.

Question 32. A rocket has a mass of 100 kg. 90% of this is fuel. It ejects fuel vapours at the rate of 1 kg/sec with a velocity of 500 m/sec relative to the rocket. It is supposed that the rocket is outside the gravitational field. The initial upthrust on the rocket when it just starts moving upwards is [NCERT 1978]
(a) Zero
(b) 500 N
(c) 1000 N
(d) 2000 N

Solution. (b). Up thrust force F = u(dm/dt) = 500 × 1 = 500 N.

Teacher's Note: Upthrust depends only on exhaust speed and burn rate; no gravity here.

Exam Note: Mass figures are distractors; use F = u·dm/dt.

Sample problems based on lift

Question 33. A man weighs 80 kg. He stands on a weighing scale in a lift which is moving upwards with a uniform acceleration of 5 m/s2. What would be the reading on the scale. (g = 10 m/s2)
(a) 400 N
(b) 800 N
(c) 1200 N
(d) Zero

Solution. (c). Reading of weighing scale = m(g + a) = 80(10 + 5) = 1200 N.

Teacher's Note: Lift accelerating upward: apparent weight R = m(g + a).

Exam Note: Use g + a for upward acceleration.

Question 34. A body of mass 2 kg is hung on a spring balance mounted vertically in a lift. If the lift descends with an acceleration equal to the acceleration due to gravity 'g', the reading on the spring balance will be
(a) 2 kg
(b) (4 × g) kg
(c) (2 × g) kg
(d) Zero

Solution. (d). R = m(g − a) = m(g − g) = 0 [because the lift is moving downward with a = g].

Teacher's Note: Free fall of the lift gives weightlessness, so the balance reads zero.

Exam Note: Free fall means apparent weight is zero.

Question 35. In the above problem, if the lift moves up with a constant velocity of 2 m/sec, the reading on the balance will be
(a) 2 kg
(b) 4 kg
(c) Zero
(d) 1 kg

Solution. (a). R = mg = 2g newton or 2 kg [because the lift is moving with zero acceleration].

Teacher's Note: Constant velocity means zero acceleration, so apparent weight equals true weight.

Exam Note: Constant velocity gives true weight, any direction.

Question 36. If the lift in problem, moves up with an acceleration equal to the acceleration due to gravity, the reading on the spring balance will be
(a) 2 kg
(b) (2 × g) kg
(c) (4 × g) kg
(d) 4 kg

Solution. (d). R = m(g + a) = m(g + g) = 2mg, so R = 2 × 2g N = 4g N or 4 kg.

Teacher's Note: Upward acceleration g doubles the apparent weight: 2 kg becomes 4 kg.

Exam Note: State reading as 4 kg (kg-wt) = 4g N.

Question 37. A man is standing on a weighing machine placed in a lift, when stationary, his weight is recorded as 40 kg. If the lift is accelerated upwards with an acceleration of 2 m/s2, then the weight recorded in the machine will be (g = 10 m/s2) [MP PMT 1994]
(a) 32 kg
(b) 40 kg
(c) 42 kg
(d) 48 kg

Solution. (d). R = m(g + a) = 40(10 + 2) = 480 N, i.e. 48 kg.

Teacher's Note: Reading scales by (g + a)/g = 1.2; 40 × 1.2 = 48 kg.

Exam Note: Convert 480 N back to kg using g = 10.

Question 38. An elevator weighing 6000 kg is pulled upward by a cable with an acceleration of 5 m s−2. Taking g to be 10 m s−2, then the tension in the cable is [Manipal MEE 1995]
(a) 6000 N
(b) 9000 N
(c) 60000 N
(d) 90000 N

Solution. (d). T = m(g + a) = 6000(10 + 5) = 90,000 N.

Teacher's Note: Cable tension must support weight and provide upward acceleration.

Exam Note: Answer in newtons, not kg.

Question 39. The ratio of the weight of a man in a stationary lift and when it is moving downward with uniform acceleration 'a' is 3 : 2. The value of 'a' is (g = acceleration due to gravity on the earth)
(a) 3g/2
(b) g/3
(c) 2g/3
(d) g

Solution. (b). (Weight of a man in stationary lift)/(weight of a man in downward moving lift) = mg/m(g − a) = 3/2, so g/(g − a) = 3/2, giving 2g = 3g − 3a, hence a = g/3.

Teacher's Note: Downward acceleration reduces apparent weight to m(g − a); set the ratio equal to 3/2.

Exam Note: Cross-multiply carefully: 2g = 3g − 3a.

Question 40. A 60 kg man stands on a spring scale in the lift. At some instant he finds, scale reading has changed from 60 kg to 50 kg for a while and then comes back to the original mark. What should we conclude
(a) The lift was in constant motion upwards
(b) The lift was in constant motion downwards
(c) The lift while in constant motion upwards, is stopped suddenly
(d) The lift while in constant motion downwards, is suddenly stopped

Solution. (c). For retarding motion of a lift R = m(g + a) for downward motion and R = m(g − a) for upward motion. Since the weight of the body decreased for a while and then comes back to the original value, it means the lift was moving upward and stops suddenly. Note: generally we use R = m(g + a) for upward motion and R = m(g − a) for downward motion, here a = acceleration, but for the given problem a = retardation.

Teacher's Note: Reading drops while acceleration is downward; an upward-moving lift slowing to rest does that.

Exam Note: Reading back to normal means final constant velocity (rest).

Question 41. A bird is sitting in a large closed cage which is placed on a spring balance. It records a weight of 25 N. The bird (mass = 0.5 kg) flies upward in the cage with an acceleration of 2 m/s2. The spring balance will now record a weight of [MP PMT 1999]
(a) 24 N
(b) 25 N
(c) 26 N
(d) 27 N

Solution. (b). Since the cage is closed and we can treat bird, cage and air as a closed (isolated) system, the force applied by the bird on the cage is an internal force, so the reading of the spring balance will not change.

Teacher's Note: Closed cage: bird, air and cage form one system, so internal forces cannot change the reading.

Exam Note: Internal forces cancel; scale reads total weight.

Question 42. A bird is sitting in a wire cage hanging from the spring balance. Let the reading of the spring balance be W1. If the bird flies about inside the cage, the reading of the spring balance is W2. Which of the following is true
(a) W1 = W2
(b) W1 > W2
(c) W1 < W2
(d) Nothing definite can be predicted

Solution. (b). In this problem the cage is a wire cage, the momentum of the system will not be conserved and due to this the weight of the system will be lesser when the bird is flying as compared to the weight of the same system when bird is resting, i.e. W2 < W1.

Teacher's Note: In an open wire cage some downward air push escapes, so the reading is lower (answer as printed).

Exam Note: Contrast closed cage (no change) with wire cage.

Sample problems based on motion of blocks in contact

Question 43. Two blocks of mass 4 kg and 6 kg are placed in contact with each other on a frictionless horizontal surface. If we apply a push of 5 N on the heavier mass, the force on the lighter mass will be
(a) 5 N
(b) 4 N
(c) 2 N
(d) None of the above

Solution. (c). Let m1 = 6 kg, m2 = 4 kg and F = 5 N (given). Force on the lighter mass = m2F/(m1 + m2) = 4 × 5/(6 + 4) = 2 N.

Teacher's Note: Common acceleration is 0.5 m/s²; contact force on the lighter block is 4 × 0.5.

Exam Note: Find common acceleration first, then isolate one block.

Question 44. In the above problem, if a push of 5 N is applied on the lighter mass, the force exerted by the lighter mass on the heavier mass will be
(a) 5 N
(b) 4 N
(c) 2 N
(d) None of the above

Solution. (d). Force on the heavier mass = m1F/(m1 + m2) = 6 × 5/(6 + 4) = 3 N.

Teacher's Note: Now the heavier block is the one being pushed by contact: force = 6 × 0.5 = 3 N.

Exam Note: Contact force depends on which block is pushed.

Question 45. In the above problem, the acceleration of the lighter mass will be
(a) 0.5 m s−2
(b) 5/4 m s−2
(c) 5/6 m s−2
(d) None of the above

Solution. (a). Acceleration = net force on the system/total mass of the system = 5/10 = 0.5 m/s2.

Teacher's Note: Blocks in contact move together; use total mass 10 kg.

Exam Note: Both blocks have the same acceleration.

Question 46. Two blocks are in contact on a frictionless table one has a mass m and the other 2m as shown in figure. Force F is applied on mass 2m then system moves towards right. Now the same force F is applied on m. The ratio of force of contact between the two blocks will be in the two cases respectively.
(a) 1 : 1
(b) 1 : 2
(c) 1 : 3
(d) 1 : 4

Solution. (b). When the force is applied on mass 2m, contact force f1 = mF/(m + 2m) = F/3. When the force is applied on mass m, contact force f2 = 2mF/(m + 2m) = 2F/3. Ratio of contact forces f1/f2 = 1/2. (The book prints g in place of F in these expressions; F is meant.)

Teacher's Note: Contact force equals the mass of the block being pushed times the common acceleration F/3m.

Exam Note: Contact force is F times far-block mass over total.

Sample problems based on motion of blocks connected by massless string

Question 47. A monkey of mass 20 kg is holding a vertical rope. The rope will not break when a mass of 25 kg is suspended from it but will break if the mass exceeds 25 kg. What is the maximum acceleration with which the monkey can climb up along the rope (g = 10 m/s2)
(a) 10 m/s2
(b) 25 m/s2
(c) 2.5 m/s2
(d) 5 m/s2

Solution. (c). Maximum tension that the string can bear Tmax = 25 × g N = 250 N. Tension in rope when the monkey climbs up T = m(g + a). For the limiting condition T = Tmax ⇒ m(g + a) = 250 ⇒ 20(10 + a) = 250 ⇒ a = 2.5 m/s2.

Teacher's Note: Rope tension while climbing is m(g + a); set it equal to the breaking tension of 250 N.

Exam Note: Limit case: tension equals the maximum the rope bears.

Question 48. Three blocks of masses 2 kg, 3 kg and 5 kg are connected to each other with light string and are then placed on a frictionless surface as shown in the figure. The system is pulled by a force F = 10 N, then tension T1 = [Orissa JEE 2002]
(a) 1 N
(b) 5 N
(c) 8 N
(d) 10 N

Solution. (c). By comparing with the general expression, T1 = (m2 + m3)F/(m1 + m2 + m3) = (3 + 5) × 10/(2 + 3 + 5) = 8 N.

Teacher's Note: T1 must accelerate the two blocks behind it (3 kg and 5 kg) at a = 1 m/s².

Exam Note: T1 = (3 + 5) × a with a = 10/10.

Question 49. Two blocks are connected by a string as shown in the diagram. The upper block is hung by another string. A force F applied on the upper string produces an acceleration of 2 m/s2 in the upward direction in both the blocks. If T and T′ be the tensions in the two parts of the string, then [AMU (Engg.) 2000]
(a) T = 70.8 N and T′ = 47.2 N
(b) T = 58.8 N and T′ = 47.2 N
(c) T = 70.8 N and T′ = 58.8 N
(d) T = 70.8 N and T′ = 0

Solution. (a). From the F.B.D. of the 4 kg mass: 4a = T′ − 4g ...(i). From the F.B.D. of the 2 kg mass: 2a = T − T′ − 2g ...(ii). For the total system upward force F = T = (2 + 4)(g + a) = 6(9.8 + 2) N = 70.8 N (the book prints 6(18 + 2), a misprint for 6(9.8 + 2)). Substituting the value of T in (i) and (ii) and solving, T′ = 4(9.8 + 2) = 47.2 N.

Teacher's Note: Lower string carries only the 4 kg block; upper string carries both blocks.

Exam Note: Use g = 9.8; tension equals mass below times (g + a).

Question 50. Three masses of 15 kg, 10 kg and 5 kg are suspended vertically as shown in the fig. If the string attached to the support breaks and the system falls freely, what will be the tension in the string between 10 kg and 5 kg masses. Take g = 10 m s−2. It is assumed that the string remains tight during the motion
(a) 300 N
(b) 250 N
(c) 50 N
(d) Zero

Solution. (d). In the condition of free fall, tension becomes zero.

Teacher's Note: In free fall all blocks accelerate at g, so strings carry no tension.

Exam Note: Free fall: zero tension, apparent weight zero.

Question 51. A sphere is accelerated upwards with the help of a cord whose breaking strength is five times its weight. The maximum acceleration with which the sphere can move up without cord breaking is
(a) 4g
(b) 3g
(c) 2g
(d) g

Solution. (a). Tension in the cord = m(g + a) and breaking strength = 5mg. For the critical condition m(g + a) = 5mg ⇒ a = 4g. This is the maximum acceleration with which the sphere can move up without cord breaking.

Teacher's Note: Set the tension m(g + a) equal to 5mg, the breaking strength.

Exam Note: Subtract g from 5g to get 4g.

Sample problems based on motion of blocks over pulley

Question 52. A light string passing over a smooth light pulley connects two blocks of masses m1 and m2 (vertically). If the acceleration of the system is g/8 then the ratio of the masses is [AIEEE 2002]
(a) 8 : 1
(b) 9 : 7
(c) 4 : 3
(d) 5 : 3

Solution. (b). a = ((m2 − m1)/(m1 + m2))g = g/8; by solving, m2/m1 = 9/7.

Teacher's Note: Atwood formula a = (m2 − m1)g/(m1 + m2); set it equal to g/8 and solve the ratio.

Exam Note: Write (m2 − m1)/(m2 + m1) = 1/8, then cross-multiply.

Question 53. A block A of mass 7 kg is placed on a frictionless table. A thread tied to it passes over a frictionless pulley and carries a body B of mass 3 kg at the other end. The acceleration of the system is (given g = 10 m s−2) [Kerala (Engg.) 2000]
(a) 100 m s−2
(b) 3 m s−2
(c) 10 m s−2
(d) 30 m s−2

Solution. (b). a = (m2/(m1 + m2))g = (3/(7 + 3)) × 10 = 3 m/s2.

Teacher's Note: Only the hanging weight 3g drives the whole 10 kg system.

Exam Note: Driving force = weight of hanging mass; total mass = 10 kg.

Question 54. Two masses m1 and m2 are attached to a string which passes over a frictionless smooth pulley. When m1 = 10 kg, m2 = 6 kg, the acceleration of masses is [Orissa JEE 2002]
(a) 20 m/s2
(b) 5 m/s2
(c) 2.5 m/s2
(d) 10 m/s2

Solution. (c). a = ((m1 − m2)/(m1 + m2))g = ((10 − 6)/(10 + 6)) × 10 = 2.5 m/s2.

Teacher's Note: Atwood machine: net weight difference over total mass.

Exam Note: Difference over sum, times g.

Question 55. Two weights W1 and W2 are suspended from the ends of a light string passing over a smooth fixed pulley. If the pulley is pulled up with an acceleration g, the tension in the string will be
(a) 4W1W2/(W1 + W2)
(b) 2W1W2/(W1 + W2)
(c) W1W2/(W1 + W2)
(d) W1W2/(2(W1 + W2))

Solution. (a). When the system is at rest the tension is T = 2m1m2g/(m1 + m2). If the system moves upward with acceleration g then T = (2m1m2/(m1 + m2))(g + g) = 4m1m2g/(m1 + m2), or T = 4W1W2/(W1 + W2).

Teacher's Note: Upward acceleration of the pulley raises effective gravity from g to 2g, doubling the tension.

Exam Note: Replace g by g + a in the Atwood tension formula.

Question 56. Two masses M1 and M2 are attached to the ends of a string which passes over a pulley attached to the top of an inclined plane. The angle of inclination of the plane is θ. Take g = 10 m s−2. If M1 = 10 kg, M2 = 5 kg, θ = 30°, what is the acceleration of mass M2
(a) 10 m s−2
(b) 5 m s−2
(c) (2/3) m s−2
(d) Zero

Solution. (d). Acceleration = ((m2 − m1 sin θ)/(m1 + m2))g = ((5 − 10 sin 30°)/(5 + 10))g = ((5 − 5)/(5 + 10))g = 0.

Teacher's Note: M1 sin 30° = 5 kg equals M2, so the system is in balance.

Exam Note: Compare M2 with M1 sin θ before computing.

Question 57. In the above problem, what is the tension in the string
(a) 100 N
(b) 50 N
(c) 25 N
(d) Zero

Solution. (b). T = m1m2(1 + sin θ)g/(m1 + m2) = 10 × 5(1 + sin 30°) × 10/(10 + 5) = 50 N.

Teacher's Note: With zero acceleration, tension simply equals the weight of M2: 5 × 10 = 50 N.

Exam Note: Equilibrium check: T = M2·g.

Question 58. In the above problem, given that M2 = 2M1 and M2 moves vertically downwards with acceleration a. If the position of the masses are reversed the acceleration of M2 down the inclined plane will be
(a) 2a
(b) a
(c) a/2
(d) None of the above

Solution. (d). If m2 = 2m1, then m2 moves vertically downward with acceleration a = ((m2 − m1 sin θ)/(m1 + m2))g = ((2m1 − m1 sin 30°)/(m1 + 2m1))g = g/2. If the position of the masses is reversed then m2 moves downward (along the incline) with acceleration a′ = ((m2 sin θ − m1)/(m1 + m2))g = ((2m1 sin 30° − m1)/(m1 + 2m1))g = 0 [as m2 = 2m1], i.e. m2 will not move.

Teacher's Note: On the incline m2 sin 30° = m1, which exactly balances the hanging mass, so there is no motion.

Exam Note: Recompute with the masses swapped; a′ = 0.

Question 59. In the above problem, given that M2 = 2M1 and the tension in the string is T. If the positions of the masses are reversed, the tension in the string be
(a) 4T
(b) 1T
(c) T
(d) T/2

Solution. (c). Tension in the string T = m1m2(1 + sin θ)g/(m1 + m2). If the position of the masses is reversed then there will be no effect on tension.

Teacher's Note: The tension formula is symmetric in m1 and m2, so swapping them changes nothing.

Exam Note: Spot the symmetry in m1 and m2.

Question 60. In the above problem, given that M1 = M2 and θ = 30°. What will be the acceleration of the system
(a) 10 m s−2
(b) 5 m s−2
(c) 2.5 m s−2
(d) Zero

Solution. (c). a = ((m2 − m1 sin θ)/(m1 + m2))g = ((1 − 1/2)/2)g = g/4 = 2.5 m/s2 [as m1 = m2].

Teacher's Note: Equal masses: hanging block wins by (1 − sin 30°) = 1/2 over total mass 2.

Exam Note: Substitute m1 = m2 and sin 30° = 1/2.

Question 61. In the above problem, given that M1 = M2 = 5 kg and θ = 30°. What is tension in the string
(a) 37.5 N
(b) 25 N
(c) 12.5 N
(d) Zero

Solution. (a). T = m1m2(1 + sin θ)g/(m1 + m2) = 5 × 5(1 + sin 30°) × 10/(5 + 5) = 37.5 N.

Teacher's Note: Check: m2(g − a) = 5(10 − 2.5) = 37.5 N.

Exam Note: Verify with T = m(g − a) using a = 2.5.

Question 62. Two blocks are attached to the two ends of a string passing over a smooth pulley as shown in the figure. The acceleration of the block will be (in m/s2) (sin 37° = 0.60, sin 53° = 0.80)
(a) 0.33
(b) 0.133
(c) 1
(d) 0.066

Solution. The book prints (b). Corrected: the 100 kg block is on the 37° side and the 50 kg block on the 53° side. a = (m2 sin β − m1 sin α)g/(m1 + m2) = (50 sin 53° − 100 sin 37°)g/(100 + 50) = (40 − 60)g/150 = −0.133 g. With g = 10 m/s2 the magnitude is 1.33 m/s2 (the 100 kg block slides down the 37° incline). The printed 0.133 is the value of the coefficient without g; none of the given options equals 1.33, so (b) 0.133 is the book's intended choice.

Teacher's Note: Compare components along the planes: 100 sin 37° = 60 against 50 sin 53° = 40.

Exam Note: Don't drop g: a = 0.133g, about 1.33 m/s².

Question 63. The two pulley arrangements shown in the figure are identical. The mass of the rope is negligible. In (a) the mass m is lifted up by attaching a mass 2m to the other end of the rope. In (b) m is lifted up by pulling the other end of the rope with a constant downward force of 2mg. The ratio of accelerations in two cases will be
(a) 1 : 1
(b) 1 : 2
(c) 1 : 3
(d) 1 : 4

Solution. (c). For the first case a1 = ((m2 − m1)/(m1 + m2))g = ((2m − m)/(m + 2m))g = g/3 ...(i). For the second case, from the free body diagram of m: ma2 = T − mg, ma2 = 2mg − mg [as T = 2mg], so a2 = g ...(ii). From (i) and (ii), a1/a2 = (g/3)/g = 1/3.

Teacher's Note: Hanging a 2m mass makes the rope tension less than 2mg because the 2m block also accelerates.

Exam Note: Compare attached mass versus applied force: tensions differ.

Question 64. In the adjoining figure m1 = 4m2. The pulleys are smooth and light. At time t = 0, the system is at rest. If the system is released and if the acceleration of mass m1 is a, then the acceleration of m2 will be
(a) g
(b) a
(c) a/2
(d) 2a

Solution. (d). Since the mass m2 travels double distance in comparison to mass m1, therefore its acceleration will be double, i.e. 2a.

Teacher's Note: Movable-pulley constraint: m2 moves twice as far as m1 in the same time.

Exam Note: Use the string-length constraint to relate accelerations.

Question 65. In the above problem (64), the value of a will be
(a) g
(b) g/2
(c) g/4
(d) g/8

Solution. (c). By drawing the FBD of m1 and m2: m1a = m1g − 2T ...(i) and m2(2a) = T − m2g ...(ii). By solving these equations a = g/4.

Teacher's Note: The movable pulley carries 2T; with m1 = 4m2 the two equations give 8a = 2g.

Exam Note: Write one equation per mass, then eliminate T.

Question 66. In the above problem, the tension T in the string will be
(a) m2g
(b) m2g/2
(c) (2/3)m2g
(d) (3/2)m2g

Solution. (d). From the solution of (65), by solving the equations T = (3/2)m2g.

Teacher's Note: From (ii): T = m2(2a + g) = m2(g/2 + g) = 1.5 m2 g.

Exam Note: Substitute a = g/4 into equation (ii).

Question 67. In the above problem, the time taken by m1 in coming to rest position will be
(a) 0.2 s
(b) 0.4 s
(c) 0.6 s
(d) 0.8 s

Solution. (b). Time taken by mass m1 to cover the distance 20 cm: t = √(2h/a) = √(2 × 0.2/(g/4)) = √(2 × 0.2/2.5) = 0.4 s. (The 20 cm distance comes from the figure of the original problem and is not stated in the text.)

Teacher's Note: Constant acceleration g/4 from rest: t = √(2s/a) with s = 0.2 m.

Exam Note: Use SI units: 20 cm = 0.2 m, g = 10.

Question 68. In the above problem, the distance covered by m2 in 0.4 s will be
(a) 40 cm
(b) 20 cm
(c) 10 cm
(d) 80 cm

Solution. (a). Since the m2 mass covers double distance therefore S = 2 × 20 = 40 cm.

Teacher's Note: Movable pulley: m2 covers twice the distance of m1 in the same time.

Exam Note: Apply the 2:1 displacement relation.

Question 69. In the above problem, the velocity acquired by m2 in 0.4 second will be
(a) 100 cm/s
(b) 200 cm/s
(c) 300 cm/s
(d) 400 cm/s

Solution. (b). Velocity acquired by mass m2 in 0.4 s: from v = u + at [as a = g/2 = 10/2 = 5 m/s2], v = 0 + 5 × 0.4 = 2 m/s = 200 cm/s.

Teacher's Note: Acceleration of m2 is 2a = g/2 = 5 m/s²; multiply by time.

Exam Note: Convert 2 m/s to cm/s.

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Math

Download Pradeep's KL Gogia Solutions for Class 11

Review detailed solutions for Class 11 Mathematics. The Pradeep's KL Gogia Solutions Physics Chapter 8 Laws Of Motion Part 1 PDF provides comprehensive answers mapped to standard Pradeep's KL Gogia Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with Pradeep's KL Gogia Solutions

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Physics?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 11 Physics. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.