Solutions for Class 9 Science: Chapter 02 Is Matter Around Us Pure
Review structured textbook solutions for Class 9 Science Chapter 02 Is Matter Around Us Pure prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Practice Class 9 Science Solutions: Chapter 02 Is Matter Around Us Pure
Access the complete solution PDF for Class 9 Science below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Periodic Test
Question 1. What is meant by a pure substance?
Solution.
A pure substance is a type of substance which contains a single type of constituent particles which are the same in their chemical nature.
Elements (iron, copper etc.) and compounds (water, carbon dioxide, etc.) are examples of pure substances.
Teacher's Note: Pure means identical particles throughout; elements and compounds both qualify.
Exam Note: Definition plus one element and one compound example.
Question 2. What type of mixtures are separated by the technique of crystallization?
Solution.
Crystallisation is a process that separates a pure solid in the form of its crystals from a solution. This process is used to obtain pure crystals of a substance from an impure mixture sample.
Example: Separation of pure crystals of copper sulphate from an impure copper sulphate solution is done using crystallisation.
Teacher's Note: Used for a dissolved solid contaminated with impurities; evaporation alone leaves impurities behind.
Exam Note: Mention solid dissolved in liquid, with copper sulphate example.
Question 3. Define (a) solute (b) solvent.
Solution.
(a) The solute is the component which gets dissolved in a solvent to form a solution. It is present in a smaller amount when compared to the solvent.
(b) The solvent is the component which dissolves a solute to form a solution. The solvent is present in larger amount when compared to the solute.
Example: copper sulphate (solute) dissolved in water (solvent) gives copper sulphate solution.
Teacher's Note: Solvent is the larger component; in solid in liquid solutions it is the liquid.
Exam Note: Give both definitions and one solute-solvent example pair.
Question 4. Why alloy is considered as a mixture?
Solution.
An alloy consists of metals mixed in a particular proportion. They exhibit the properties of the constituents. No new chemical properties are shown once the metals are mixed. Hence an alloy is considered as a mixture.
Example: steel is an alloy of iron and carbon as it is a mixture of these two elements where the larger proportion is of metal (iron) and smaller proportion of non-metal (carbon).
Teacher's Note: Alloys keep constituent properties and have variable composition, like any mixture.
Exam Note: Mention variable proportions and retained properties.
Question 5. Define solution.
Solution.
A solution is a homogeneous mixture of two or more substances. The substance present in the larger amount (solvent) dissolves the substance present in the smaller amount (solute).
Example: sugar (solute) dissolved in water (solvent) gives a sugar solution.
Teacher's Note: Uniform composition throughout is the key word: homogeneous.
Exam Note: Write 'homogeneous mixture' and name solute and solvent.
Question 6. Give reasons for the following: Why air is considered as a mixture?
Solution.
The constituent particles of air are evenly distributed. This means that a sample of air taken from any place would contain the constituent particles in the same proportion. Air is constituted by more than one kind of substance and shows the properties of its constituent particles. Therefore, air is considered a mixture.
Teacher's Note: Air has several gases in variable proportions that keep their own properties.
Exam Note: Name nitrogen, oxygen and say composition is not fixed.
Question 7. Give reasons for the following: Why is it said that solubility of any solute changes with a change in temperature?
Solution.
A solvent dissolves solute particles by overcoming the forces between the solute particles (solute-solute interaction). So, to dissolve a solute, the solute-solute interaction must be broken by the solvent particles.
When the temperature increases, the kinetic energy of the solvent particles increases, so they break the solute-solute interactions more effectively. This allows more solute particles to be added. So the solubility increases with increase in temperature. Lowering the temperature does the opposite: it decreases the solubility of the solute.
(This is the usual behaviour for solids dissolving in liquids.)
Teacher's Note: Higher temperature gives solvent particles more kinetic energy to separate solute particles.
Exam Note: Link temperature to kinetic energy and solubility of solids.
Question 8. Give reasons for the following: Why Tyndall effect is not observed when light passes through a true solution or suspension?
Solution.
The phenomenon where the path of a light beam becomes visible as a result of scattering of light by colloidal particles is called the Tyndall effect. The size of the particle should be such that it can scatter light. Particles which are very small (as in true solutions) do not scatter light enough, and the very large particles of a suspension settle down and make the mixture opaque rather than showing a clear beam. So the Tyndall effect is not observed in true solutions or suspensions.
In certain special cases, if the particle size of a suspension is small enough to scatter light, then suspensions also show the Tyndall effect.
Teacher's Note: Only colloid-sized particles scatter a visible beam; true solution particles are too small.
Exam Note: Say particle size decides scattering; colloids show it.
Question 9. Give reasons for the following: Why does cream separate from milk on churning?
Solution.
Cream (fat) and milk differ in density. Cream is lighter (less dense) than the rest of the milk. When milk is churned or spun rapidly (centrifugation), the denser particles are thrown outwards to the bottom while the lighter cream collects towards the centre/top, from where it is separated. This process is called centrifugation.
(Correction: the book states that cream is denser and stays at the bottom, which is wrong; cream is the lighter fat-rich part.)
Teacher's Note: Spinning forces denser skim milk outward; lighter cream gathers near the axis.
Exam Note: Name centrifugation and the density difference.
Question 10. Give reasons for the following: Why different colours present in the ink rise to different levels during paper chromatography?
Solution.
Chromatography is the process of separation of solutes that dissolve in the same solvent.
Ink is a mixture of two or more colours (dyes) dissolved in water. Different colours present in ink have different solubility in water. The component which is more soluble rises faster in the strip of filter paper. The component which is less soluble travels less distance in the filter paper. This is why different colours present in the ink rise to different levels during paper chromatography.
Teacher's Note: Greater solubility in the solvent means greater distance travelled up the paper.
Exam Note: Link solubility of each dye to height reached.
Question 11. Differentiate between true solution, colloidal solution and suspension.
Solution.
| True solution | Suspension | Colloidal solution |
|---|---|---|
| Homogeneous mixture | Heterogeneous mixture | Heterogeneous mixture |
| Appearance: transparent | Appearance: opaque | Appearance: translucent |
| Particle size: very small, cannot be seen by naked eye | Particle size: large, can be seen by naked eye | Particle size: between true solution and suspension, cannot be seen by naked eye |
| Solute particles do not settle down when left undisturbed | Solute particles settle down when left undisturbed | Solute particles do not settle down when left undisturbed |
| Filtration separation: not possible | Filtration separation: possible | Filtration separation: not possible |
| Does not scatter light | Does not show Tyndall effect | Scatters light (Tyndall effect) |
| Eg: salt solution | Eg: sand in water | Eg: milk |
(Corrections: the book wrongly said suspension particles cannot be seen by the naked eye; they can. The Tyndall row was added.)
Teacher's Note: Particle size decides everything: settling, filtering and light scattering follow from it.
Exam Note: Table with size, stability, filtration and Tyndall effect rows.
Question 12. List the points of difference between homogeneous and heterogeneous mixtures.
Solution.
| Homogeneous mixtures | Heterogeneous mixtures |
|---|---|
| Uniform composition | Non-uniform composition |
| Constituent particles are not visible to naked eye | Constituent particles may be visible to naked eye |
| Components cannot be separated by simple filtration | Components may be separated by simple filtration |
| Do not scatter a beam of light | May scatter a beam of light (Tyndall effect, e.g. colloids) |
| Particle size is very small | Particle size is larger than that of homogeneous mixtures |
| Eg: sugar solution, alloys | Eg: mud in water, ink |
Teacher's Note: Uniform throughout versus visibly different parts is the core distinction.
Exam Note: Give at least three differences with examples.
Question 13. Differentiate between saturated and unsaturated solution.
Solution.
| Saturated solution | Unsaturated solution |
|---|---|
| At a given temperature, no more solute can be dissolved | At a given temperature, more solute can be dissolved |
| The concentration of solution is maximum (at a given temperature) | The concentration of solution is lower than the maximum (at a given temperature) |
Teacher's Note: Saturation depends on temperature; heating usually lets more solute dissolve.
Exam Note: Always add 'at a given temperature' in the answer.
Question 14. What is the difference between aqueous and non-aqueous solution?
Solution.
| Aqueous solution | Non-aqueous solution |
|---|---|
| The solution in which the solvent used is water | The solvent used is not water |
| Water is a polar solvent. | Solvent may be polar or non-polar. |
| Liquid solution | May be solid, liquid or gaseous solution |
| Eg: salt solution (salt + water) | Eg: tincture of iodine (iodine + alcohol). Alcohol is the solvent |
Teacher's Note: Only the solvent identity matters: water or something else.
Exam Note: Cite tincture of iodine as non-aqueous example.
Question 15. Explain the following giving examples: (a) Saturated solution (b) Unsaturated solution (c) Suspension.
Solution.
(a) A solution in which, at a given temperature, no more solute can be dissolved by the solvent is called a saturated solution. The concentration of such a solution is the maximum at a given temperature.
To illustrate this, take a beaker, add some common salt and fill it with water; stir well to get a salt solution. Continue adding salt slowly along with stirring. At some point the solution reaches a state where even though salt is added and stirred, some salt stays undissolved. The solution has then reached its saturation level at that temperature.
(b) A solution in which, at a given temperature, more solute can be dissolved by the solvent is called an unsaturated solution. Unsaturated solutions can be made saturated by adding more solute to them. In the activity above, the solution obtained in the beginning is an unsaturated solution.
(c) A suspension is a heterogeneous mixture of two or more components. The particles forming the suspension are visible to the naked eye. In this mixture, the solute particles do not dissolve in the solvent; instead they remain suspended in the solvent medium. When left undisturbed, the solute particles tend to settle down at the bottom of the container.
Eg: a mixture of sand and water forms a suspension.
Teacher's Note: Undissolved salt after stirring marks saturation; suspensions settle on standing.
Exam Note: Give a definition and example for each of the three parts.
Question 16. How will you separate a mixture containing benzene and diesel (difference in their boiling points is more than 50°C), which are miscible with each other?
Solution.
A mixture of two miscible liquids whose boiling points differ by more than 50°C can be separated using a technique called distillation. The liquids must not decompose upon boiling.
The mixture of liquids is taken in a round bottom flask and is heated. The liquid component with the lower boiling point starts to escape from the mixture and the vapour is passed through a condenser. The cold water helps to condense the vapour into its liquid form, which is collected in a beaker.
In the given mixture, at around 80°C, benzene gets converted into the gaseous state and is sent through the condenser to get benzene back in the liquid state.
Finally, diesel remains in the round bottom flask and benzene in the beaker.
Teacher's Note: Lower boiling benzene vaporises first; cold water in the condenser liquefies it.
Exam Note: Draw distillation set-up and label condenser, thermometer, flask.
Question 17. Describe the method of tea making by using the terminology of: (a) soluble (b) solvent (c) solute (d) solution (e) insoluble (f) filtrate (g) residue (h) dissolve.
Solution.
Take a kettle or a teapot and add water to it. Boil the water and add tea leaves/tea powder to it. Here water is the solvent and the soluble colour and flavour of the tea (the solute) dissolve in it to form a solution. The tea leaves themselves are insoluble in water.
Once the mixture starts to boil, dissolve sugar (another solute, which is soluble in water) in it. To this solution add milk if milk tea is wanted. Once it is boiled, remove it from the heat and filter the mixture. The tea leaves left on the strainer are the residue, and the liquid that passes through (the tea) is the filtrate.
Teacher's Note: Identify each term in the real process: water is solvent, leaves are residue.
Exam Note: Use all eight terms correctly in a short sequence.
Question 18. What is meant by the concentration of a solution? Explain by giving an example.
Solution.
The concentration of a solution is the amount of solute present in a given amount of solution or solvent.
Concentration of solution = Amount of solute / Amount of solution (or Amount of solute / Amount of solvent)
It is mainly expressed in two ways: (a) Mass by mass percentage = (Mass of solute / Mass of solution) × 100; (b) Mass by volume percentage = (Mass of solute / Volume of solution) × 100.
Example: 30 g of sugar (solute) is dissolved in 150 g of water (solvent). Mass of solution = 30 + 150 = 180 g.
Mass by mass percentage = (30/180) × 100 = (1/6) × 100 = 16.7%
(Correction: the book rounded 16.67% down to 16.6%; the correct rounding is 16.7%.)
Teacher's Note: Divide by the mass of the whole solution, not the solvent alone.
Exam Note: Add masses first; give the answer as percentage.
Question 19. Give two characteristics each of: (a) Pure substances (b) Mixtures.
Solution.
(a) A pure substance is a type of matter formed by a single type of particles. The constituent particles are identical in their chemical nature. The constituent particles of a pure substance are always found in a fixed composition and cannot be separated using physical methods. Elements and compounds are examples of pure substances.
(b) Mixtures are a type of matter formed by more than one pure substance. The constituent particles just mix together in different proportions to give different mixtures. The properties exhibited by the mixture are the same as the properties exhibited by the individual constituents. These constituents can be separated using physical techniques. Sugar solution, milk and air are examples of mixtures.
Note: The sub-division of matter is shown as:
Teacher's Note: Fixed composition and chemical-only separation mark pure substances; mixtures are the opposite.
Exam Note: Two points each: composition and method of separation.
Question 20. Draw a labelled diagram showing fractional distillation.
Solution.
Fractional distillation is the process used to separate a mixture of miscible liquids whose boiling points differ by less than 25°C. The experimental set-up is similar to that of simple distillation except for a fractionating column which is filled with glass beads.
The mixture is heated using a burner, and both liquids most likely enter the vapour state. The vapours hit the glass beads in the column and tend to condense. Of the two vapours, the less volatile component cools faster and returns to the liquid state. Gradually, the more volatile component reaches the top of the column, passes through the condenser as shown in the figure and gets liquefied.
The less volatile component remains in the round bottom flask. The process is repeated to separate the two liquids completely.
Teacher's Note: Glass beads give surface for repeated condensation and evaporation, enriching the more volatile liquid.
Exam Note: Label column, condenser, thermometer, flask; state boiling difference below 25°C.
Question 21. Show diagrammatically how you will separate two immiscible liquids.
Solution.
Separation of two immiscible liquids is done using a separating funnel. The figure shows a separating funnel clamped to a stand. In this case the mixture to be separated contains oil and water.
Immiscible liquids do not mix and have different densities. When the mixture is left undisturbed, the denser liquid comes to the bottom of the funnel and the lighter liquid stays on top of it. By operating the stopcock carefully, the denser liquid (here, water) is run into the conical flask. The stopcock is closed when the water has been completely transferred. Oil remains in the funnel and water is in the conical flask.
Teacher's Note: Denser water settles below oil; the stopcock is closed just as the interface reaches it.
Exam Note: Draw funnel with two layers, stopcock and flask labelled.
Question 22. Draw a labelled diagram to show separation of dyes in black ink using a chromatography method.
Solution.
Chromatography is a technique used to separate components which dissolve in the same solvent. Different components present in the ink have different solubility in the solvent. The component which is more soluble travels more distance with the solvent; the component with less solubility travels less distance.
An ink spot is marked on a thin strip of filter paper. The bottom of the paper is immersed in a beaker containing water (the spot must stay above the water level). As the water rises up, it takes along the different components of the ink to different heights according to their solubility. As a result, the colours (individual components of the ink) are seen along the height of the strip. This way the individual components are separated.
Teacher's Note: Ink spot must start above the water level, otherwise the dye washes into the beaker.
Exam Note: Show start and end strips; label spot, paper, water.
Question 23. Crystallisation method is used to get salt from sea water. Why is it so?
Solution.
The salt present in sea water may contain impurities in dissolved form. Simple evaporation causes the water to evaporate, leaving the impurities with the salt. In crystallisation, a pure solid is obtained in the form of crystals from a solution. So, crystallisation ensures the purity of the product obtained.
Teacher's Note: Evaporation to dryness traps impurities; slow crystal growth leaves them in solution.
Exam Note: Contrast evaporation with crystallisation for purity.
Question 24. Fractional distillation method is used for the separation of different gases from air. Why is it so?
Solution.
To separate the different gases from air, they are first liquefied: the air is compressed and cooled to obtain liquid air. The boiling points of the various constituents differ by less than 25°C. For instance, the boiling point of oxygen is −183°C whereas that of nitrogen is −196°C. So simple distillation would convert both into the gaseous state and one would fail to separate them. Due to this reason, fractional distillation is used.
Both liquids get converted into vapour and pass through the fractionating column. The less volatile component gets condensed and becomes a liquid again. The more volatile component suffers less condensation, so it tends to reach the top of the column, where its vapour is condensed and collected. For effective separation the process is repeated several times.
Teacher's Note: Oxygen and nitrogen boil only 13°C apart, too close for simple distillation.
Exam Note: Quote the two boiling points and the 25°C rule.
Question 25. A separating funnel is used to separate two immiscible liquids and not miscible liquids. Why is it so?
Solution.
Two immiscible liquids are separated by the difference in their densities. When left undisturbed, the denser liquid stays at the bottom of the separating funnel and the lighter liquid stays at the top. Then the denser liquid is run out by carefully operating the stopcock.
In the case of miscible liquids, the mixture is homogeneous: the liquids mix completely and do not form separate layers, however long the mixture is left. So they cannot be separated with a separating funnel.
Teacher's Note: Layers form only if liquids do not mix; miscible liquids stay one phase.
Exam Note: Key word: layers. Miscible liquids form no layers.
Comprehensive Exercises (MCQ)
Question 1. Which of the following will show the 'Tyndall effect'?
A. Salt solution
B. Sugar solution
C. Soap solution
D. Copper sulphate solution
Solution.
Answer: C. Soap solution
The Tyndall effect is the phenomenon in which the path of a light beam becomes visible when it enters a colloidal solution, due to scattering of light by the colloidal particles. Soap solution is a colloidal solution and hence shows the Tyndall effect. Salt solution, sugar solution and copper sulphate solution are true solutions and do not show it.
Teacher's Note: Only the colloid among the options scatters light.
Exam Note: Colloid shows Tyndall effect; true solutions do not.
Question 2. What happens when a saturated solution is cooled?
A. It becomes unsaturated
B. It remains unaffected
C. It becomes supersaturated
D. It becomes transparent
Solution.
Answer: C. It becomes supersaturated
A solution in which no more solute can be dissolved at a given temperature is called a saturated solution. Solubility of a solid generally decreases with a fall in temperature. On cooling, the solution therefore holds more solute than it normally can at the lower temperature, i.e. it becomes supersaturated (the excess solute then separates out as crystals).
Teacher's Note: Cooling lowers solubility, so solute is now in excess of the saturation limit.
Exam Note: Solubility falls on cooling for most solids.
Question 3. Which of the following is a compound?
A. Air
B. Water
C. Soda water
D. Pond water
Solution.
Answer: B. Water
Water is a compound formed by the elements hydrogen and oxygen. Air, soda water and pond water are examples of mixtures.
Teacher's Note: A compound has fixed composition; the others vary from sample to sample.
Exam Note: Water has H and O in the fixed ratio 2:1 by atoms.
Question 4. Which of the following is an element?
A. Oxygen gas
B. Carbon dioxide gas
C. Sulphur dioxide gas
D. Nitrogen dioxide gas
Solution.
Answer: A. Oxygen gas
Elements are pure substances which cannot be broken down into simpler substances. Carbon dioxide, sulphur dioxide and nitrogen dioxide are compounds; they can be broken down into their elements by chemical reactions.
Teacher's Note: Count the kinds of atoms: oxygen gas has only one.
Exam Note: Compound names usually show two element names.
Question 5. Which of the following is a homogeneous mixture?
A. Soda water
B. Copper sulphate solution
C. Starch solution
D. Sodium chloride solution
Solution.
Answer: C. Starch solution (as the question is printed, see note)
The question as printed has three homogeneous options: soda water, copper sulphate solution and sodium chloride solution are all uniform throughout. Starch solution is a colloid (heterogeneous), so it is the odd one out.
The question was probably meant as 'Which is NOT a homogeneous mixture?', for which the answer is C. Starch solution. (Note: the book also calls starch a suspension, which is wrong; it is a colloidal solution.)
Teacher's Note: Three options are homogeneous, so the question is probably misprinted; check the wording.
Exam Note: In exams, read for 'not' and eliminate true solutions.
Question 6. Which of the following materials fall in the category of a 'pure substance'?
A. Ice, milk and iron
B. CaO, CO2 and NaCl
C. Brick, mercury and wood
D. Iron, CaO and air
Solution.
Answer: B. CaO, CO2 and NaCl
Pure substances are those in which all the constituent particles are the same in their chemical nature; elements and compounds are pure substances. CaO, CO2 and NaCl are compounds. Air, milk, brick and wood are mixtures.
Teacher's Note: Every item in the correct option must be an element or compound.
Exam Note: Reject any option containing air, milk or wood.
Question 7. Which of the following is an aqueous solution?
A. Sulphur in carbon disulphide
B. Iodine in carbon disulphide
C. Sodium chloride in water
D. Iodine in alcohol
Solution.
Answer: C. Sodium chloride in water
An aqueous solution is a solution in which the solvent is water. In sodium chloride in water, water is the solvent.
Teacher's Note: Aqueous means water is the solvent.
Exam Note: Check the second-named substance: it must be water.
Question 8. The substances that sublime can be made to liquefy by:
A. Heating them under pressure
B. Heating them at low pressure
C. Cooling them under pressure
D. Cooling them at low pressure
Solution.
Answer: A. Heating them under pressure
Sublimation is the change of a solid directly into gas without passing through the liquid state. When pressure is applied, the particles are pushed closer together; heating the solid under pressure then makes it melt to a liquid, as it cannot sublime under the increased pressure.
Teacher's Note: High pressure suppresses vaporisation, letting the solid melt first.
Exam Note: Heat plus pressure gives liquid for subliming solids.
Question 9. The substances that sublime easily are:
A. Petrol, acetone, camphor, iodine and solid CO2
B. Iodine, solid CO2, ammonium chloride, kerosene and diesel
C. Iodine, camphor, ammonium chloride, anthracene and naphthalene
D. Iodine, acetone, camphor, petrol and naphthalene
Solution.
Answer: C. Iodine, camphor, ammonium chloride, anthracene and naphthalene
Sublimation is the conversion of a solid directly to gas without entering the liquid state. Iodine, camphor, ammonium chloride, anthracene and naphthalene are all solids that sublime on heating. Petrol, acetone, kerosene and diesel are liquids.
Teacher's Note: Reject options that list liquids like petrol, acetone or kerosene.
Exam Note: Remember: camphor, naphthalene, NH4Cl, iodine sublime.
Question 10. Chromatography is the technique which is used for separation of those solutes that:
A. Dissolve in the same solvent
B. Get adsorbed to different extremes
C. Get absorbed at the same speed
D. Are soluble in aqueous medium
Solution.
Answer: A. Dissolve in the same solvent
Chromatography separates a mixture into its individual components. The components dissolved in the same solvent travel at different speeds depending on their solubility, and so get separated.
Teacher's Note: Different solubility in one solvent gives different speeds on the paper.
Exam Note: Standard wording: solutes dissolving in the same solvent.
Question 11. Which of the following statements are true for pure substances? (i) Pure substances contain only one kind of particles (ii) Pure substances may be compounds or mixtures (iii) Pure substances have the same composition throughout (iv) Pure substances can be exemplified by all elements other than nickel
A. (i) and (ii)
B. (i) and (iii)
C. (iii) and (iv)
D. (ii) and (iii)
Solution.
Answer: B. (i) and (iii)
Pure substances contain only one kind of particles and have the same composition throughout. Elements and compounds are pure substances, not mixtures, so (ii) is false. All elements, including nickel, are pure substances, so (iv) is false.
Teacher's Note: Check each statement separately; (ii) and (iv) contain clear errors.
Exam Note: Mixtures are never pure substances.
Question 12. Rusting of an article made up of iron is called:
A. Corrosion and it is a physical as well as chemical change
B. Dissolution and it is a physical change
C. Corrosion and it is a chemical change
D. Dissolution and it is a chemical change
Solution.
Answer: C. Corrosion and it is a chemical change
Corrosion is the gradual degradation of a material by chemical reaction with its environment. Rusting is the corrosion of iron, in which iron is converted into hydrated iron oxide on exposure to air and moisture. A new substance is formed, so it is a chemical change.
Teacher's Note: A new substance, iron oxide, forms, so the change is chemical.
Exam Note: Rusting is chemical because a new compound forms.
Question 13. A mixture of sulphur and carbon disulphide is:
A. Heterogeneous and shows Tyndall effect
B. Homogeneous and shows Tyndall effect
C. Heterogeneous and does not show Tyndall effect
D. Homogeneous and does not show Tyndall effect
Solution.
Answer: D. Homogeneous and does not show Tyndall effect
Sulphur dissolves in carbon disulphide to form a true solution. True solutions are homogeneous and do not show the Tyndall effect.
Teacher's Note: Sulphur dissolves in carbon disulphide; particles too small to scatter light.
Exam Note: True solution: homogeneous, no Tyndall effect.
Question 14. Tincture of iodine has antiseptic properties. This solution is made by dissolving:
A. Iodine in potassium iodide
B. Iodine in Vaseline
C. Iodine in water
D. Iodine in alcohol
Solution.
Answer: D. Iodine in alcohol
Tincture of iodine is made by dissolving iodine in alcohol. It is used as an antiseptic medicine. (Option A is printed as 'potassium iodine' in the book.)
Teacher's Note: 'Tincture' means a solution in alcohol.
Exam Note: Tincture of iodine: iodine in alcohol, a non-aqueous solution.
Question 15. Which of the following are homogeneous in nature? (i) Ice (ii) Wood (iii) Soil (iv) Air
A. (i) and (iii)
B. (ii) and (iv)
C. (i) and (iv)
D. (iii) and (iv)
Solution.
Answer: C. (i) and (iv)
Homogeneous means the composition is uniform throughout. Ice is a pure substance and air is a mixture, but both have uniform composition throughout. Wood and soil show visibly different parts, so they are heterogeneous.
Teacher's Note: Homogeneous does not mean pure; air is a homogeneous mixture.
Exam Note: Uniform composition decides, not purity.
Comprehensive Exercises (T/F)
Question 1. Write true or false: The properties that can be observed and specified are called physical properties.
Solution.
Answer: True
Properties such as density, boiling point and melting point are physical properties and can be observed or measured directly.
Teacher's Note: Physical properties are measured without changing the substance's identity.
Exam Note: Give density, boiling point as examples.
Question 2. Write true or false: During burning of a candle only chemical change takes place.
Solution.
Answer: False
Both physical and chemical changes occur. The wax melts (solid to liquid) and then vaporises, and a change of state is a physical change. Burning is combustion: the wax vapour combines with oxygen to give carbon dioxide and water vapour, which is a chemical change.
Teacher's Note: Melting wax is physical, burning vapour is chemical; both occur together.
Exam Note: Name one physical and one chemical change.
Question 3. Write true or false: Non-metals are lustrous and good conductors of heat and electricity.
Solution.
Answer: False
Metals are lustrous and good conductors of heat and electricity. Non-metals are generally dull and poor conductors (graphite is an exception).
Teacher's Note: Lustre and conductivity are metal properties; graphite is the exception.
Exam Note: Mention graphite as the exception for extra credit.
Question 4. Write true or false: Metals are malleable, ductile, sonorous and lustrous.
Solution.
Answer: True
Metals can be beaten into thin sheets (malleable) and drawn into thin wires (ductile). They produce a ringing sound when struck (sonorous) and have a shiny appearance (lustre).
Teacher's Note: Define each term with a use, such as foil, wire, bell.
Exam Note: Give a one-word meaning for each property.
Question 5. Write true or false: A compound is a substance composed of two or more elements, chemically combined with one another in a fixed proportion.
Solution.
Answer: True
Compounds are pure substances composed of two or more elements chemically combined in a fixed proportion. Water and carbon dioxide are examples of compounds.
Teacher's Note: Chemical combination in fixed ratio separates compounds from mixtures.
Exam Note: Quote 'fixed proportion' and name water as example.
Free study material for Science
Download Evergreen Solutions for Class 9 Math PDF
Access Class 9 Mathematics Solutions
Review detailed solutions for Class 9 Mathematics. The Evergreen Solutions Class 9 Science Chapter 2 Is Matter Around Us Pure PDF provides comprehensive answers mapped to standard Evergreen Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Mastering Core Concepts with Evergreen Solutions
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Additional Study Materials for 2026
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the book for Class 9 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.