CBSE Class 9 Science Advanced Physics Force and Laws of Motion MCQs Set 21

Practice MCQs for Class 9 Physics Force and Laws of Motion

Access targeted multiple-choice questions for Force and Laws of Motion designed to align with the latest CBSE academic syllabus for Class 9 Physics. These objective practice sets help students evaluate their conceptual understanding and improve exam readiness.

Access Force and Laws of Motion Questions and Solutions

Navigate directly to the 50 objective questions for Force and Laws of Motion using the digital viewer below. Each practice set includes verified answer keys, allowing students to instantly cross-check their work and identify areas requiring further revision.

Multiple Choice Questions

Question 1: Two masses of 3 kg and 4 kg are suspended over a frictionless pulley by a string joining them. The acceleration of the system will be
(a) 4.9 m/s2
(b) 2.45 m/s2
(c) 1.4 m/s2
(d) 9.8 m/s2
Show Answer & Explanation

Answer: (c) 1.4 m/s2

Explanation:
1. \( a = \dfrac{(4 - 3) \times 9.8}{4 + 3} = \) 1.4 m/s².

Teacher's Note:
1. Take g = 9.8 m/s².

Question 2: In the system shown, a constant force F is applied on block \( m_1 \), which pushes block \( m_2 \) on a frictionless surface. The reaction offered by \( m_2 \) upon \( m_1 \) is
m1 m2 F f a Motion of bodies in contact FBD for m₁ f F FBD for m₂ f (a) \( \dfrac{m_1 F}{m_1 + m_2} \)
(b) \( \dfrac{m_2 F}{m_1 + m_2} \)
(c) \( \left(\dfrac{m_1 - m_2}{m_2}\right)F \)
(d) zero
Show Answer & Explanation

Answer: (b) \( \dfrac{m_2 F}{m_1 + m_2} \)

Explanation:
1. Common acceleration \( a = \dfrac{F}{m_1 + m_2} \).
2. The contact force on \( m_2 \) is \( f = m_2 a = \dfrac{m_2 F}{m_1 + m_2} \); by Newton's third law, \( m_2 \) pushes back on \( m_1 \) with the same force.

Teacher's Note:
1. The contact force accelerates only the block ahead (m₂).

Question 3: Two blocks are in contact on a frictionless table. One has mass m and the other 2m. A force F is applied on 2m as shown in the figure. Now the same force F is applied from the right on m. In the two cases, the ratio of the force of contact between the two blocks will be
F 2m m (a) 1 : 1
(b) 1 : 2
(c) 2 : 1
(d) 1 : 3
Show Answer & Explanation

Answer: (b) 1 : 2

Explanation:
1. Case 1 (F on 2m): contact force = force needed to accelerate m \( = m \times \dfrac{F}{3m} = \dfrac{F}{3} \).
2. Case 2 (F on m): contact force accelerates 2m \( = 2m \times \dfrac{F}{3m} = \dfrac{2F}{3} \).
3. Ratio = 1 : 2.

Teacher's Note:
1. The block in front receives the contact force.

Question 4: The force exerted by the floor of an elevator on the feet of a person standing there is more than the weight of the person, if the elevator is
(a) going up and slowing down
(b) going down and slowing down
(c) going up and speeding up
(d) both (b) and (c)
Show Answer & Explanation

Answer: (d) both (b) and (c)

Explanation:
1. The normal force exceeds the weight when the acceleration is upward: \( R = m(g + a) \).
2. Going up and speeding up: acceleration upward. Going down and slowing down: acceleration also upward.
3. So both (b) and (c).

Teacher's Note:
1. Going up and slowing down has a downward acceleration, so R < mg.

Question 5: A boy of mass 50 kg is standing on a weighing machine placed on the floor of a lift. The machine reads his weight in N. What is the reading of the machine if the lift is moving upwards with a uniform speed of 10 m s−1? (Take g = 10 m s−2)
(a) 510 N
(b) 480 N
(c) 490 N
(d) 500 N
Show Answer & Explanation

Answer: (d) 500 N

Explanation:
1. Uniform speed means zero acceleration, so the reading equals the true weight.
2. \( R = mg = 50 \times 10 = \) 500 N.

Teacher's Note:
1. Only acceleration, not velocity, changes the reading.

Question 6: A lift is descending with an acceleration of 2 m/s2. What will be the apparent weight of a person of 80 kg mass? (take g = 10 m/s2)
(a) 640 N
(b) 72 N
(c) 48 N
(d) 480 N
Show Answer & Explanation

Answer: (a) 640 N

Explanation:
1. Descending with acceleration a: \( W' = m(g - a) = 80 \times (10 - 2) = \) 640 N.

Teacher's Note:
1. g = 10 m/s² is assumed (with 9.8 the answer would be 624 N).

Question 7: A block of mass 5 kg resting on a horizontal surface is connected by a cord, passing over a light frictionless pulley to a hanging block of mass 5 kg. The coefficient of kinetic friction between the block and the surface is 0.5. Tension in the cord is (g = 9.8 m/s2)
5 kg A 5 kg B (a) 49 N
(b) zero
(c) 36.75 N
(d) 12.75 N
Show Answer & Explanation

Answer: (c) 36.75 N

Explanation:
1. Friction on A = \( 0.5 \times 5 \times 9.8 = 24.5 \) N. For the system: \( 5g - 24.5 = 10a \Rightarrow a = 2.45 \) m/s².
2. For the hanging block: \( 5g - T = 5a \Rightarrow T = 49 - 12.25 = \) 36.75 N.

Teacher's Note:
1. Apply F = ma to each block separately.

Question 8: A 30 kg block rests on a rough horizontal surface. A force of 200 N is applied on the block. The block acquires a speed of 4 m/s, starting from rest, in 2 s. What is the value of the coefficient of friction? (g = 10 m/s2)
(a) \( \dfrac{10}{3} \)
(b) \( \dfrac{\sqrt{3}}{10} \)
(c) 0.47
(d) 0.185
Show Answer & Explanation

Answer: (c) 0.47

Explanation:
1. \( a = 4/2 = 2 \) m/s².
2. \( F - \mu mg = ma \Rightarrow 200 - \mu(300) = 60 \).
3. \( \mu = 140/300 = \) 0.47.

Teacher's Note:
1. Net force = applied force − friction.

Question 9: A block of mass 0.1 kg is held against a wall by applying a horizontal force of 5 N on the block. If the coefficient of friction between the block and the wall is 0.5, the magnitude of the frictional force acting on the block is (g = 9.8 m/s2)
(a) 2.5 N
(b) 0.98 N
(c) 4.9 N
(d) 0.49 N
Show Answer & Explanation

Answer: (b) 0.98 N

Explanation:
1. The block is at rest, so the static friction balances its weight.
2. \( f = mg = 0.1 \times 9.8 = \) 0.98 N.
3. (The limiting friction \( \mu N = 2.5 \) N is larger, so the block does not slip.)

Teacher's Note:
1. Static friction adjusts to the force needed, up to μN.

Question 10: A block of mass m is at rest on an inclined plane which is making an angle θ with the horizontal. The coefficient of friction between the block and plane is μ. Then the frictional force acting between the surfaces is
θ m (a) μ mg
(b) μ mg sin θ
(c) μ (mg sin θ − mg cos θ)
(d) mg sin θ
Show Answer & Explanation

Answer: (d) mg sin θ

Explanation:
1. The block is at rest, so the friction is static and balances the component of weight along the plane.
2. \( f = \) \( mg\sin\theta \).

Teacher's Note:
1. μmg cos θ is only the maximum (limiting) friction.

Question 11: A balloon of weight w is falling vertically downward with a constant acceleration a (< g). The magnitude of the air resistance is
(a) w
(b) \( w\left(1 + \dfrac{a}{g}\right) \)
(c) \( w\left(1 - \dfrac{a}{g}\right) \)
(d) \( w\dfrac{a}{g} \)
Show Answer & Explanation

Answer: (c) \( w\left(1 - \dfrac{a}{g}\right) \)

Explanation:
1. \( w - R = ma = \dfrac{w}{g}a \).
2. \( R = w\left(1 - \dfrac{a}{g}\right) \).

Teacher's Note:
1. Mass m = w/g.

Question 12:
Assertion (A): Action and reaction forces act on two different objects.
Reason (R): Action and reaction have zero resultant.
(a) Both A and R are true, and R is the correct explanation of A.
(b) Both A and R are true, but R is not the correct explanation of A.
(c) A is true, but R is false.
(d) A is false, but R is true.
Show Answer & Explanation

Answer: (c) A is true, but R is false.

Explanation:
1. Action and reaction forces act on two different bodies, so Assertion (A) is true.
2. Reason (R) is false: since they act on different bodies they cannot be added to give a zero resultant.
3. So A is true but R is false.

Teacher's Note:
1. Forces cancel only when they act on the same body.

Question 13:
Assertion (A): When brakes are applied on a wet road, a car is likely to skid.
Reason (R): Brakes prevent rotation of the wheels and there is not sufficient friction between the road and the wheels to stop the translational motion.
(a) Both A and R are true, and R is the correct explanation of A.
(b) Both A and R are true, but R is not the correct explanation of A.
(c) A is true, but R is false.
(d) A is false, but R is true.
Show Answer & Explanation

Answer: (a) Both A and R are true, and R is the correct explanation of A.

Explanation:
1. On a wet road, the friction is small, and when the brakes lock the wheels the car skids: A is true.
2. R correctly says brakes stop the rotation of the wheels and the road friction is not enough to stop the translational motion, so R explains A.

Teacher's Note:
1. Skidding happens when the friction is too small to stop the car.

Question 14: Assertion (A): The slope of the momentum versus time curve gives us the acceleration.
Reason (R): Acceleration is given by the rate of change of momentum.
(a) Both A and R are true, and R is the correct explanation of A.
(b) Both A and R are true, but R is not the correct explanation of A.
(c) A is true, but R is false.
(d) Both A and R are false.
Show Answer & Explanation

Answer: (d) Both A and R are false.

Explanation:
1. The slope of the p–t graph is \( \dfrac{\Delta p}{\Delta t} \), which is the force, not the acceleration, so A is false.
2. The rate of change of momentum is also the force, so R is false.
3. Both are false.

Teacher's Note:
1. F = dp/dt; acceleration is the rate of change of velocity.

Practice MCQs for Class 9 Physics Force and Laws of Motion

About Force and Laws of Motion MCQs for Class 9 Physics

Review structured objective questions for Class 9 Physics Force and Laws of Motion. Built according to official CBSE guidelines, these MCQ sets support daily revision and core concept reinforcement.

How to Verify Your MCQ Answers

Cross-reference your completed choices with comprehensive NCERT solutions for Class 9 Physics to ensure absolute clarity across all sub-topics in this chapter.

Enhance Speed with Online MCQ Tests

Wrap up your chapter revision by testing your knowledge against standard question formats. Everything on our platform is provided free of charge.

FAQs

Where can I access latest CBSE Class 9 Science Advanced Physics Force and Laws of Motion MCQs Set 21?

You can get most exhaustive CBSE Class 9 Science Advanced Physics Force and Laws of Motion MCQs Set 21 for free on StudiesToday.com. These MCQs for Class 9 Physics are updated for the 2026-27 academic session as per CBSE examination standards.

Are Assertion-Reasoning and Case-Study MCQs included in the Physics Class 9 material?

Yes, our CBSE Class 9 Science Advanced Physics Force and Laws of Motion MCQs Set 21 include the latest type of questions, such as Assertion-Reasoning and Case-based MCQs. 50% of the CBSE paper is now competency-based.

How do practicing Physics MCQs help in scoring full marks in Class 9 exams?

By solving our CBSE Class 9 Science Advanced Physics Force and Laws of Motion MCQs Set 21, Class 9 students can improve their accuracy and speed which is important as objective questions provide a chance to secure 100% marks in the Physics.

Do you provide answers and explanations for CBSE Class 9 Science Advanced Physics Force and Laws of Motion MCQs Set 21?

Yes, Physics MCQs for Class 9 have answer key and brief explanations to help students understand logic behind the correct option as its important for 2026 competency-focused CBSE exams.

Can I practice these Physics Class 9 MCQs online?

Yes, you can also access online interactive tests for CBSE Class 9 Science Advanced Physics Force and Laws of Motion MCQs Set 21 on StudiesToday.com as they provide instant answers and score to help you track your progress in Physics.