CBSE Class 9 Science Advanced Physics Fluid Mechanics MCQs Set 10

Multiple Choice Questions (MCQs) for Class 9 Physics: Fluid Mechanics

Access targeted multiple-choice questions for Fluid Mechanics designed to align with the latest CBSE academic syllabus for Class 9 Physics. These objective practice sets help students evaluate their conceptual understanding and improve exam readiness.

Practice Fluid Mechanics MCQs for Class 9 Physics

View or download the dedicated Fluid Mechanics MCQ resource below. Practicing these 50 objective questions regularly builds familiarity with standard exam patterns and helps secure higher marks in final Physics evaluations.

Multiple Choice Questions

Question 1: The vessels shown below all contain water to the same height. Compare the pressure exerted by the water on the vessel bottoms.
1 2 3 4same water level (a) Least for 3, then 4, then 2, then 1
(b) Least for 4, then 3, then 2, then 1
(c) Least for 2, then 3, then 4, then 1
(d) All pressures are the same
Show Answer & Explanation

Answer: (d) All pressures are the same

Explanation:
1. \( P = h\rho g \), which depends only on the height of the liquid and its density.
2. The height and the liquid are the same, so the pressure at the bottom is the same in all vessels, whatever their shape.

Teacher's Note:
1. Shape and width of a vessel do not matter.

Question 2: A cubical block of side 10 cm floats at the interface of oil (0.6 g/cc, layer 10 cm deep) and water (1.0 g/cc), with its lower 2 cm in the water. The pressure above that of the atmosphere at the lower face of the block is
(a) 200 N/m2
(b) 680 N/m2
(c) 400 N/m2
(d) 800 N/m2
Show Answer & Explanation

Answer: (d) 800 N/m2

Explanation:
1. Gauge pressure at the lower face = pressure of the oil layer + pressure of 2 cm of water.
2. \( P = 600\times10\times0.10 + 1000\times10\times0.02 = 600+200 = 800 \) N/m2.

Teacher's Note:
1. Take g = 10 m s−2 and convert cm to m.

Question 3: A body submerged in the sea was brought up slowly from the sea bed to the sea surface. Which graph correctly shows the variation of pressure P on the body as the body rises (from sea bed to sea surface)?
(a) P 1 atm 0 Sea bed Sea surface
(b) P 1 atm 0 Sea bed Sea surface
(c) P 1 atm 0 Sea bed Sea surface
(d) P 1 atm 0 Sea bed Sea surface
Show Answer & Explanation

Answer: (a) P 1 atm 0 Sea bed Sea surface

Explanation:
1. Pressure = atmospheric pressure + hρg, so it falls steadily as the depth h decreases.
2. At the surface h = 0, so the pressure becomes 1 atm (not zero). Only graph (a) falls linearly and ends at 1 atm.

Teacher's Note:
1. Absolute pressure never drops to zero at the surface; it equals the atmospheric pressure.

Question 4: The widening of the wall of a dam towards the bottom is because of
(a) increase in pressure with depth of water
(b) decrease in pressure with depth of water
(c) decrease in density of water
(d) increase in density of water
Show Answer & Explanation

Answer: (a) increase in pressure with depth of water

Explanation:
1. Pressure increases with depth \( (p = h\rho g) \).
2. The lower part of the wall must be thicker to withstand the greater pressure.

Teacher's Note:
1. Dams are thicker at the bottom.

Question 5: A dam has a height H and a width b. Assuming that the water level reaches the top, find the net force exerted on the dam for H = 60 m and b = 200 m. (Take g = 10 m s−2, density of water 1000 kg/m3)
(a) 3 × 108 N
(b) 4.2 × 109 N
(c) 2.3 × 1010 N
(d) 3.6 × 109 N
Show Answer & Explanation

Answer: (d) 3.6 × 109 N

Explanation:
1. Total force on a dam: \( F = \tfrac{1}{2}\rho g W H^2 \).
2. \( F = \tfrac{1}{2}\times1000\times10\times200\times60^2 = 3.6\times10^9 \) N.

Teacher's Note:
1. The average pressure is \( \rho gH/2 \), acting on area \( bH \).

Question 6: At a depth of 1000 m in an ocean, what is the gauge pressure? (The density of sea water is 1.03 × 103 kg m−3; g = 10 m s−2)
(a) 1.03 × 105 Pa
(b) 2.06 × 105 Pa
(c) 1.03 × 107 Pa
(d) 2.06 × 107 Pa
Show Answer & Explanation

Answer: (c) 1.03 × 107 Pa

Explanation:
1. Gauge pressure = \( h\rho g \).
2. \( = 1000\times1.03\times10^3\times10 = 1.03\times10^7 \) Pa.

Teacher's Note:
1. Gauge pressure excludes the atmospheric pressure.

Question 7: To obtain the absolute pressure from the gauge pressure
(a) subtract atmospheric pressure
(b) add atmospheric pressure
(c) subtract 273
(d) add 273
Show Answer & Explanation

Answer: (b) add atmospheric pressure

Explanation:
1. \( P_{absolute} = P_{atm} + P_{gauge} \).

Teacher's Note:
1. Gauge pressure is measured above atmospheric pressure.

Question 8: A U-tube of uniform cross-section is partially filled with liquid I. Another liquid II, which does not mix with I, is poured into one arm. The free surfaces of the two arms are then at the same level, while the level of liquid I in the other arm has risen by 2 cm. If the specific gravity of liquid I is 1.1, the specific gravity of liquid II must be
(a) 1.2
(b) 1.1
(c) 1.3
(d) 1.0
Show Answer & Explanation

Answer: (b) 1.1

Explanation:
1. Liquid I falls 2 cm on the side where II is poured and rises 2 cm on the other side. The interface is 2 cm below the original level and the common top is 2 cm above it, so the column of II is 4 cm high.
2. Pressure at the interface level: \( 4\rho_{II}g = 4\rho_{I}g \), so the specific gravity of II = 1.1.

Teacher's Note:
1. Compare pressures at the level of the interface.

Question 9: In the U-tube shown, the left arm is closed and holds a gas at pressure P above a column of liquid of density ρ and height 3h. The right arm is open (pressure P0) and holds a column of height h of a liquid of density 2ρ above the common interface level. Then
3h h P P₀ ρ 2ρ closed (a) P < P0
(b) P > P0
(c) P = P0
(d) P = 0
Show Answer & Explanation

Answer: (a) P < P0

Explanation:
1. Equal pressure at the interface level: \( P + 3h\rho g = P_0 + h(2\rho)g \).
2. \( P = P_0 - h\rho g \), which is less than \( P_0 \).

Teacher's Note:
1. Write the pressure at the same horizontal level through each liquid.

Question 10: A liquid X of density 3.36 g/cm3 is poured in a U-tube that contains mercury (13.6 g/cm3). Another liquid Y is poured in the left arm so that its column is 8 cm high, while the column of X in the right arm is 10 cm high; the upper levels of X and Y are the same. What is the density of Y?
(a) 0.8 g/cc
(b) 1.2 g/cc
(c) 1.4 g/cc
(d) 1.6 g/cc
Show Answer & Explanation

Answer: (a) 0.8 g/cc

Explanation:
1. Since the tops are level and X is 2 cm taller, the mercury surface under Y is 2 cm higher than that under X.
2. Pressure at the lower mercury surface: \( 3.36\times10 = \rho_Y\times8 + 13.6\times2 \), so \( 8\rho_Y = 33.6-27.2 = 6.4 \) and \( \rho_Y = 0.8 \) g/cc.

Teacher's Note:
1. Balance pressures at the level of the lower mercury surface.

Question 11: Mercury is a convenient liquid to use in a barometer because
(a) it is a metal
(b) it has a high boiling point
(c) it expands little with temperature
(d) it has a high density
Show Answer & Explanation

Answer: (d) it has a high density

Explanation:
1. From \( h = P/\rho g \), a liquid of high density gives a short column.
2. With water the column would be 10.33 m, which is impractical, but mercury needs only 76 cm.

Teacher's Note:
1. Height of column is inversely proportional to density.

Question 12: A capillary tube C dipped in a liquid that wets it has its upper end close to a horizontal tube H. If air is blown through H (across the top of the capillary), what will happen to the liquid column in the capillary tube?
(a) The level will fall below A.
(b) The level will rise above A.
(c) The level will remain at A.
(d) It is difficult to predict.
Show Answer & Explanation

Answer: (b) The level will rise above A.

Explanation:
1. Moving air across the top lowers the pressure there (Bernoulli's principle).
2. The atmospheric pressure on the liquid surface outside is then greater, so liquid is pushed up and the level rises above A.

Teacher's Note:
1. Fast-moving air means lower pressure.

Question 13: A manometer is connected to a gas supply (right arm); the left arm is open to the air. The water level in the left arm stands 8 cm above that in the right arm. The pressure of the gas is
8 cm Air to gas supply Water open arm on the left, gas on the right (a) 8 cm of water more than atmospheric pressure
(b) 12 cm of water more than atmospheric pressure
(c) 8 cm of water less than atmospheric pressure
(d) 12 cm of water less than atmospheric pressure
Show Answer & Explanation

Answer: (a) 8 cm of water more than atmospheric pressure

Explanation:
1. The right-hand surface is pushed lower than the left-hand surface, so the gas pressure is greater than the atmospheric pressure.
2. The excess pressure equals the height difference, 8 cm of water.

Teacher's Note:
1. Use only the difference between the two water levels, not the other lengths.

Question 14: A solid of mass 1.6 kg and density 2.4 × 103 kg m−3 is completely immersed in water. The loss of weight is
(a) 0.66 N
(b) 0.66 kg wt
(c) 6.6 kg wt
(d) 66 N
Show Answer & Explanation

Answer: (b) 0.66 kg wt

Explanation:
1. Volume = \( \dfrac{1.6}{2400} = 6.67\times10^{-4} \) m3.
2. Loss of weight = weight of water displaced = \( 6.67\times10^{-4}\times1000 = 0.667 \) kg = 0.66 kg wt (about 6.5 N).

Teacher's Note:
1. Loss of weight equals the weight of water displaced.
2. 0.66 N is too small, 66 N too large, so (b) is the one.

Question 15: A body floats in a liquid contained in a beaker. The whole system falls freely under gravity. The upthrust on the body is
(a) zero
(b) equal to the weight of the liquid displaced
(c) equal to the body weight in air
(d) equal to the weight of the immersed portion of the body
Show Answer & Explanation

Answer: (a) zero

Explanation:
1. In free fall the effective g is zero, so the displaced liquid has no (apparent) weight.
2. Upthrust = weight of displaced liquid = 0.

Teacher's Note:
1. Weightlessness removes buoyancy.

Multiple Choice Questions (MCQs) for Class 9 Physics Fluid Mechanics

Download Multiple Choice Questions: Fluid Mechanics (Class 9 Physics)

Explore reliable practice questions for Fluid Mechanics tailored for Class 9 Physics learners. Use these multiple-choice formats to evaluate preparedness and strengthen problem-solving skills.

Concept Clarification for Fluid Mechanics

Cross-reference your completed choices with comprehensive NCERT solutions for Class 9 Physics to ensure absolute clarity across all sub-topics in this chapter.

Additional Study Resources for Class 9 Physics

Wrap up your chapter revision by testing your knowledge against standard question formats. Everything on our platform is provided free of charge.

FAQs

Where can I access latest CBSE Class 9 Science Advanced Physics Fluid Mechanics MCQs Set 10?

You can get most exhaustive CBSE Class 9 Science Advanced Physics Fluid Mechanics MCQs Set 10 for free on StudiesToday.com. These MCQs for Class 9 Physics are updated for the 2026-27 academic session as per CBSE examination standards.

Are Assertion-Reasoning and Case-Study MCQs included in the Physics Class 9 material?

Yes, our CBSE Class 9 Science Advanced Physics Fluid Mechanics MCQs Set 10 include the latest type of questions, such as Assertion-Reasoning and Case-based MCQs. 50% of the CBSE paper is now competency-based.

How do practicing Physics MCQs help in scoring full marks in Class 9 exams?

By solving our CBSE Class 9 Science Advanced Physics Fluid Mechanics MCQs Set 10, Class 9 students can improve their accuracy and speed which is important as objective questions provide a chance to secure 100% marks in the Physics.

Do you provide answers and explanations for CBSE Class 9 Science Advanced Physics Fluid Mechanics MCQs Set 10?

Yes, Physics MCQs for Class 9 have answer key and brief explanations to help students understand logic behind the correct option as its important for 2026 competency-focused CBSE exams.

Can I practice these Physics Class 9 MCQs online?

Yes, you can also access online interactive tests for CBSE Class 9 Science Advanced Physics Fluid Mechanics MCQs Set 10 on StudiesToday.com as they provide instant answers and score to help you track your progress in Physics.