Download CBSE Class 8 Mathematics Assignments
Review targeted academic assignments with the CBSE Class 8 Mathematics Practical Geometry Assignment Set 04. Built according to official CBSE standards for the 2026-27 term, these downloadable Class 8 Mathematics worksheets support effective daily practice for Chapter 04 Practical Geometry.
Access CBSE School Assignments and Answers
View or download the dedicated CBSE Class 8 Mathematics Practical Geometry Assignment Set 04 resource below. Engaging with these assignments under focused study conditions ensures continuous academic progress and mastery of the 2026-27 curriculum.
VIII - Mathematics Assignment No. 04 - Practical Geometry
Construct the following constructions and write their steps of constructions.
Question 1. Construct a quadrilateral ABCD such that \(AB = 4\) cm, \(BC = 3\) cm, \(AD = 3.5\) cm, diagonal \(AC = 5\) cm and diagonal \(BD = 6\) cm.
Answer:
Steps of Construction:
1. Draw a line segment \(AB = 4\) cm.
2. With center \(A\) and radius equal to \(5\) cm (\(AC\)), draw an arc.
3. With center \(B\) and radius equal to \(3\) cm (\(BC\)), draw another arc to intersect the previous arc at \(C\).
4. Join \(AC\) and \(BC\).
5. With center \(A\) and radius equal to \(3.5\) cm (\(AD\)), draw an arc on the other side of \(AB\).
6. With center \(B\) and radius equal to \(6\) cm (\(BD\)), draw an arc to intersect the previous arc at \(D\).
7. Join \(AD\), \(BD\), and \(CD\).
\(ABCD\) is the required quadrilateral.
In simple words: Draw triangle ABC first using three sides, then locate point D using the remaining side and diagonal lengths.
Exam Tip: Always make a rough sketch first to visualize the given sides and diagonals correctly before doing actual construction.
Question 2. Construct a parallelogram ABCD such that \(AB = 3.5\) cm, \(BC = 5.5\) cm and angle \(B = 75^\circ\).
Answer:
Steps of Construction:
1. Draw a line segment \(AB = 3.5\) cm.
2. At point \(B\), construct an angle of \(75^\circ\) using a compass and ruler (\(\angle ABX = 75^\circ\)).
3. With center \(B\) and radius equal to \(5.5\) cm (\(BC\)), cut an arc on ray \(BX\) at point \(C\).
4. With center \(C\) and radius equal to \(3.5\) cm (\(CD = AB\)), draw an arc.
5. With center \(A\) and radius equal to \(5.5\) cm (\(AD = BC\)), draw another arc to intersect the previous arc at \(D\).
6. Join \(CD\) and \(AD\).
\(ABCD\) is the required parallelogram.
In simple words: Use the property that opposite sides of a parallelogram are equal and construct the given angle at vertex B.
Exam Tip: Remember that opposite sides of a parallelogram are equal in length (\(CD = AB\) and \(AD = BC\)).
Question 3. Construct a rectangle ABCD such that side \(AD = 3\) cm and diagonal \(BD = 5\) cm.
Answer:
Steps of Construction:
1. In a rectangle, each corner angle is a right angle (\(90^\circ\)), and opposite sides are equal.
2. Draw a line segment \(AD = 3\) cm.
3. At point \(D\), construct an angle of \(90^\circ\) (\(\angle ADX = 90^\circ\)).
4. Since \(ABCD\) is a rectangle, by Pythagoras theorem in right triangle \(ABD\):
\(AB = \sqrt{BD^2 - AD^2} = \sqrt{5^2 - 3^2} = \sqrt{25 - 9} = \sqrt{16} = 4\) cm.
5. With center \(D\) and radius equal to \(4\) cm (\(AB = CD\)), cut an arc on ray \(DX\) to get point \(C\).
(Alternatively, with center \(B\) [after locating B] or using diagonal property). Let us construct using base \(AB = 4\) cm or use arc of radius \(5\) cm from \(A\) to cut the perpendicular line at \(B\).
Let us refine standard steps:
- Draw side \(AD = 3\) cm.
- Construct \(90^\circ\) at \(D\) and \(A\).
- With center \(A\) and radius \(5\) cm (diagonal \(BD = AC = 5\) cm in a rectangle), cut the perpendicular line at \(B\).
- With center \(B\) and radius \(3\) cm, and center \(D\) and radius \(4\) cm, find point \(C\).
- Join \(AB\), \(BC\), and \(CD\).
\(ABCD\) is the required rectangle.
In simple words: Use the property that diagonals of a rectangle are equal and all angles are 90 degrees.
Exam Tip: Diagonals of a rectangle are equal in length, so \(AC = BD = 5\) cm.
Question 4. Construct a square ABCD such that length of one diagonal is \(8\) cm.
Answer:
Steps of Construction:
1. Draw a line segment \(AC = 8\) cm representing the diagonal.
2. Draw the perpendicular bisector of \(AC\). Let it intersect \(AC\) at point \(O\).
3. Since diagonals of a square are equal and bisect each other at \(90^\circ\), half of the diagonal is \(\frac{8}{2} = 4\) cm.
4. From center \(O\), cut arcs of length \(4\) cm on both sides of the perpendicular bisector to get points \(B\) and \(D\).
5. Join \(AB\), \(BC\), \(CD\), and \(DA\).
\(ABCD\) is the required square.
In simple words: Draw one diagonal, find its perpendicular bisector, and mark off half-diagonal lengths on both sides to locate the other two vertices.
Exam Tip: Diagonals of a square are perpendicular bisectors of each other and are equal in length.
Question 5. Construct a rhombus PQRS such that one side is \(5\) cm and one angle is \(60^\circ\).
Answer:
Steps of Construction:
1. Draw a line segment \(PQ = 5\) cm.
2. At point \(P\), construct an angle of \(60^\circ\) (\(\angle QPX = 60^\circ\)).
3. With center \(P\) and radius equal to \(5\) cm (\(PS = 5\) cm, since all sides of a rhombus are equal), cut an arc on ray \(PX\) at point \(S\).
4. With center \(S\) and radius \(5\) cm, draw an arc on the right side.
5. With center \(Q\) and radius \(5\) cm, draw another arc to intersect the previous arc at point \(R\).
6. Join \(SR\) and \(QR\).
\(PQRS\) is the required rhombus.
In simple words: All four sides of a rhombus are equal in length. Construct one side, draw the 60-degree angle at the vertex, and use compass arcs to locate the remaining vertices.
Exam Tip: A rhombus has all four sides equal, so once one side is given as 5 cm, all other sides are also 5 cm.
Free study material for Mathematics
Download Practice Assignments: Class 8 Mathematics Chapter 04 Practical Geometry
Download Assignment: Chapter 04 Practical Geometry (Class 8 Mathematics)
Explore reliable practice questions for Chapter 04 Practical Geometry tailored for Class 8 learners. Use these structured worksheets to evaluate preparedness and strengthen core problem-solving skills.
Why Practice Class 8 Mathematics Assignments?
- Curriculum Standards: Assignments match modern CBSE sample formats to ensure relevant preparation.
- Thorough Revision: Detailed problem sets reinforce core concepts and eliminate conceptual weak spots.
- Execution Speed: Timed practice with assignment sets sharpens overall response timing.
How to Approach Mathematics Chapter 04 Practical Geometry Assignments
- Initial Reading: Begin by reading the NCERT book for Class 8 Mathematics to build a baseline understanding.
- Independent Testing: Attempt assignment questions unassisted, then verify work using provided answer keys.
- Supplementary Aids: Leverage revision notes and worksheets whenever you encounter difficult topics.
FAQs
You can download free PDF assignments for Class 8 Mathematics Chapter 04 Practical Geometry from StudiesToday.com. These practice sheets have been updated for the 2026-27 session covering all concepts from latest NCERT textbook.
Yes, our teachers have given solutions for all questions in the Class 8 Mathematics Chapter 04 Practical Geometry assignments. This will help you to understand step-by-step methodology to get full marks in school tests and exams.
Yes. These assignments are designed as per the latest CBSE syllabus for 2026. We have included huge variety of question formats such as MCQs, Case-study based questions and important diagram-based problems found in Chapter 04 Practical Geometry.
Practicing topicw wise assignments will help Class 8 students understand every sub-topic of Chapter 04 Practical Geometry. Daily practice will improve speed, accuracy and answering competency-based questions.
Yes, all printable assignments for Class 8 Mathematics Chapter 04 Practical Geometry are available for free download in mobile-friendly PDF format.