All In One Solutions Class 9 Science Chapter 8 Motion

Solutions for Class 9 Science: Chapter 08 Motion

Explore reliable textbook solutions for Chapter 08 Motion tailored for Class 9 learners using methodologies. Utilizing these Science answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice Class 9 Science Solutions: Chapter 08 Motion

Access the complete solution PDF for Class 9 Science below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Question 1. Write the SI unit of the both distance and displacement

Solution.

Displacement refers to the measure of the shortest path between any two points whereas distance is the measurement of path between two points. The SI unit of both distance and displacement is meter (m).

Teacher's Note: Distance is the path length; displacement is the shortest straight-line change in position. Both are measured in metres.

Exam Note: SI unit of both: metre (m).

Question 2. State whether displacement is a scalar or a vector quantity.

Solution.

Displacement is a vector quantity as it has both magnitude and direction.

Teacher's Note: Displacement has magnitude and direction, so it is a vector, unlike distance which is a scalar.

Exam Note: Displacement = vector; distance = scalar.

Question 3. What is the displacement of a satellite when it makes a complete round along its circular path?

Solution.

Displacement along a circular path is zero as the final and the initial points meet each other that is both the points are same.

Teacher's Note: After one complete circle the object returns to its starting point, so its net change in position is zero.

Exam Note: Complete circle: displacement zero, distance 2πr.

Question 4. In which one of the following cases will the distance covered and the magnitude of the displacement are not the same? Justify.

(i) A passenger in a train travels from Delhi to Kolkata.

(ii) A raindrop falling in still air.

(iii) An athlete completes one lap in a race.

Solution.

(iii) An athlete completes one lap in a race

As the track is circular, the displacement would be zero but distance will be equal to the circumference of the track.

Teacher's Note: On a closed circular track start and end coincide, so displacement is zero while distance is the track length.

Exam Note: Round trip or circle: displacement 0, distance not 0.

Question 5. After studying the motion of a ball rolling on a straight line as shown in the figure.

PRQ2 m10 m

Find its distance and displacement covered.

(i) when it rolls from P to Q and then to R (i.e., P to Q to R)

(ii) Finally comes back to P (i.e., P to P)(take, P as reference point).

Solution.

(i) Distance would be PQ+QR = 10 m + 2 m = 12 m whereas displacement is PR = 8 m as displacement is the shortest distance between two points.

(ii) In this case displacement is zero as initial and final point is same but distance would be PQ+QP = 20 m.

Teacher's Note: Distance adds up the whole path travelled; displacement is only the straight-line gap between start and end points.

Exam Note: Distance never less than displacement magnitude.

Question 1. Define average speed, write any one point of difference between average speed and average velocity.

Solution.

Average speed of the object in an interval of time is the distance travelled by the object divided by the duration of interval of time. Average speed is a scalar quantity while average velocity is a vector quantity.

Teacher's Note: Average speed is total distance divided by total time; it has no direction, whereas average velocity uses displacement.

Exam Note: Average speed = total distance ÷ total time.

Question 2. The maximum speed of a train is 80 km/h. It takes 10 h to cover a distance of 400 km. Find the ratio of its maximum speed to its average speed.

Solution.

Maximum speed = 80 km/hr

Average speed = \(\frac{\text{distance travelled}}{\text{time interval}}\) = \(\frac{400\ \text{km}}{10\ \text{hr}}\) = 40 km/hr

Ratio = \(\frac{\text{maximum speed}}{\text{average speed}}\) = \(\frac{80\ \text{km/hr}}{40\ \text{km/hr}}\) = 2

Teacher's Note: Average speed is total distance divided by total time taken; the ratio compares the top speed with this average.

Exam Note: Average speed = distance ÷ time; ratio = 2.

Question 3. Which of the two can be zero under certain conditions: average speed of a moving body or average velocity of a moving body?

Solution.

Average speed of a moving body cannot be zero because the distance covered is never zero, but average velocity is a vector quantity and it can be zero if the object returns to its starting point, for example when it completes a circular path.

Teacher's Note: Average velocity uses displacement, zero for a round trip; a moving body covers distance, so average speed is nonzero.

Exam Note: Round trip: average velocity zero, average speed not zero.

Question 4. (i) Give two factors on which acceleration depends.

(ii)Mention the formula and SI unit of acceleration.

Solution.

(i) Acceleration depends on the change in the velocity and the time taken by the object to travel.

(ii) Acceleration = \(\frac{\text{change in velocity}}{\text{time taken}}\) = \(\frac{\text{final velocity}(v)-\text{initial velocity}(u)}{\text{time taken}(t)}\)

SI unit of acceleration is meter per second square (m/s²).

Teacher's Note: Acceleration is the rate of change of velocity: change in velocity divided by time taken. Its SI unit is m/s².

Exam Note: a = (v − u)/t; unit m/s².

Question 5. Fill in the blanks.

(i) ………..is the term used for negative acceleration.

(ii) A bus starting from rest attains a velocity of 54 km/h in 60 s, its acceleration is …………….. .

Solution.

(i) Retardation is the term used for negative acceleration.

Explanation: If the velocity of an object is decreasing, it is said to have negative acceleration.

(ii) A bus starting from rest attains a velocity of 54 km/h in 60 s, its acceleration is 0.25 m/s².

Explanation: initial velocity = 0

time = 60 s

final velocity = 54 km/hr = \(\frac{54\times1000}{60\times60}\) m/s = 15 m/s

Acceleration = \(\frac{\text{change in velocity}}{\text{time taken}}\) = \(\frac{\text{final velocity}(v)-\text{initial velocity}(u)}{\text{time taken}(t)}\)

= \(\frac{15\ \text{m/s}-0}{60\ \text{s}}\) = 0.25 m/s²

Teacher's Note: Negative acceleration (retardation) means velocity decreases. Acceleration is change in velocity divided by time, in m/s.

Exam Note: Convert km/h to m/s: multiply by 5/18.

Question 1. If the distance-time graph of a particle is parallel to time axis, then how much is the velocity of the particle?

Solution.

timeDisplacement

The velocity of the particle will be zero because the distance is constant and the time is increasing and this will happen only when the particle is stationary.

Teacher's Note: A horizontal line on a distance-time graph means distance stays constant, so the object is at rest.

Exam Note: Flat distance-time graph: body at rest, velocity zero.

Question 2. In the figure below is shown the time-distance graph of cyclist.

01234510203040Time (s)Distance (m)

Find out from the graph average speed in the whole journey.

Solution.

Average speed = \(\frac{\text{Total distance covered}}{\text{Total time taken}}\)

= \(\frac{40\ \text{m}}{5\ \text{s}}\) = 8 m/s

Teacher's Note: Average speed is total distance divided by total time for the whole journey, including any time spent at rest.

Exam Note: Average speed = total distance ÷ total time, not a sum.

Question 3. Give one similarity and one dissimilarity between the two graphs:

OTime (s)Velocity (m/s)BXYOTime (s)Velocity (m/s)BAXY

Solution.

Similarity is that both the graphs shows uniform acceleration and dissimilarity is that in the first graph the object starts from rest whereas in the second graph the object has some initial velocity.

Teacher's Note: A straight line on a velocity-time graph means uniform acceleration; the line's starting height gives the initial velocity.

Exam Note: Straight v-t line: uniform acceleration; intercept: initial velocity.

Question 4. What is the value of acceleration in the following graph:

10203040501020304050OTime (s)Velocity (m/s)

Solution.

The acceleration is the slope of the velocity-time graph.

Acceleration = \(\frac{v_f-v_i}{t_f-t_i}\) = \(\frac{(0-50)\ \text{m/s}}{(40-0)\ \text{s}}\) = -1.25 m/s²

Teacher's Note: Acceleration equals the slope of a velocity-time graph, found as change in velocity divided by change in time.

Exam Note: Slope of v-t graph = acceleration; negative means retardation.

Question 5. Given figures represent the motion of two objects P and Q. Which of the objects has positive acceleration and which one has negative acceleration?

515OTime (s)Velocity (m/s)P515OTime (s)Velocity (m/s)Q

Solution.

Graph P is having negative acceleration as the time is increasing, velocity is decreasing and finally comes to rest which shows retardation whereas Graph Q represents positive acceleration as the time is increasing velocity is also increasing.

Teacher's Note: A falling velocity-time line shows negative acceleration (retardation); a rising line shows positive acceleration.

Exam Note: Falling v-t line: negative acceleration; rising: positive.

Question 6. Velocity-time graphs of two objects P and Q are as given below:

1234562468101214OTime (s)Velocity (m/s)P12345624681012OTime (s)Velocity (m/s)Q

(i) Which object starts from rest?

(ii) Which object has more velocity after 5 s?

Solution.

(i) The object in Graph Q starts from rest as when time is zero, velocity is also zero.

(ii) Graph P will have more velocity after 5 secs as from the graphs we can infer that in Graph P after 5 secs the velocity is 12 m/s whereas in Graph Q the velocity reaches 10 m/s. Both the graph shows uniform acceleration but object in graph P has an initial velocity of 2 m/s and object in graph Q starts from rest.

Teacher's Note: A velocity-time line starting at zero means the object starts from rest; compare heights at equal times.

Exam Note: Read velocity at the given time directly from the graph.

Question 1. A body is moving with a velocity of 10 m/s. If it starts acceleration with the rate of 2.5 m/s2. Find out its velocity after 10s.

Solution.

Using the first equation of motion: v = u + at

where: v = final velocity

u = initial velocity = 10 m/s

a = acceleration = 2.5 m/s²

t = time = 10 s

v = 10 m/s + 2.5 m/s² × 10 s = 10 + 25 m/s = 35 m/s

Teacher's Note: The first equation of motion, v = u + at, gives final velocity under constant acceleration.

Exam Note: v = u + at; write given data first.

Question 2. If a car travels 50 m distance in 4s with a acceleration of 5 m/s2, then what was its initial speed?

Solution.

Using the second equation of motion: s = ut + \(\frac{1}{2}\)at²

where: s = distance covered = 50 m

u = initial velocity = ?

a = acceleration = 5 m/s²

t = time = 4 s

s = ut + \(\frac{1}{2}\)at²

50 = u × 4 s + \(\frac{1}{2}\) × 5 × 4²

50 = u × 4 s + 40

50 – 40 = u × 4 s

10 = u × 4 s

u = \(\frac{10}{4}\) m/s = 2.5 m/s

Teacher's Note: The second equation of motion, s = ut + ½at², relates distance covered to initial velocity, acceleration and time.

Exam Note: s = ut + ½at²; substitute carefully, then solve for u.

Question 3. A cyclist is moving with a speed of 14 m/s. He starts accelerating with a rate of 6 m/s2 and acquired the speed of 18 m/s. Calculate, what distance did he move in acquiring that speed?

Solution.

Using the third equation of motion: v² – u² = 2as

where: s = distance covered = ?

v = final velocity = 18 m/s

u = initial velocity = 14 m/s

a = acceleration = 6 m/s²

18² – 14² = 2 × 6 × s

324 – 196 = 12 × s

\(\frac{128}{12}\) = s

s = 10.67 m

Teacher's Note: The third equation of motion, v² − u² = 2as, links speeds and distance without needing time.

Exam Note: v² − u² = 2as; use when time is not given.

Question 4. A bus is moving with a speed 72 km/h can be stopped by brakes after at least 10 m. What will be the minimum stopping distance, if the same bus is moving at a speed of 144 km/h?

Solution.

We have to first find the retardation.

Using the third equation of motion: v² – u² = 2as

where: s = distance covered = 10 m

v = final velocity = 0 m/s (brakes are applied so that bus comes to rest)

u = initial velocity = 72 km/h = 20 m/s

a = acceleration = ? m/s²

0 – 20² = 2 × a × 10

-400 = 20 × a

\(-\frac{400}{20}\) = a

a = -20 m/s²

Now, u = initial velocity = 144 km/h = 40 m/s

s = distance covered = ?? m

v = final velocity = 0 m/s (brakes are applied so that bus comes to rest)

a = acceleration = -20 m/s²

Using the third equation of motion: v² – u² = 2as

0 – 40² = 2 × (-20) × s

-1600 = -40 × s

\(\frac{-1600}{-40}\) = s

s = 40 m

Teacher's Note: Use v² − u² = 2as: find braking deceleration first, then stopping distance at the new speed.

Exam Note: Stopping distance is proportional to the square of speed.

Question 5. What do you understand by a uniform circular motion?

Solution.

Uniform circular motion is defined as the motion of an object in a circle at a constant speed. As an object moves in a circle, it is constantly changing its direction. In all instances, the object is moving tangentially to the circle. For example an artificial satellite moving along its orbit around the earth, the car taking a curve in a circular track.

Teacher's Note: In uniform circular motion speed is constant but velocity direction changes continuously, so the object is accelerating.

Exam Note: Constant speed, changing direction: velocity not constant.

Question 1. If the acceleration of the particle is constant in magnitude but not in direction, then what type of path does the particle follow?

Solution.

The particle is moving in a circular path because at every point the direction is changing along the path and is always tangential to the circular path.

Teacher's Note: If acceleration only changes the direction of velocity and not its magnitude, the object moves along a circle.

Exam Note: Constant-magnitude, changing-direction acceleration: circular motion.

Question 2. What does the path of an object look like when it is in uniform motion?

Solution.

Uniform Motion means that the object covers the equal distance in equal interval of time that is the speed is constant. So path can be straight or curved but the magnitude remains the same.

Teacher's Note: In uniform motion equal distances are covered in equal time intervals, so speed stays constant whatever the path shape.

Exam Note: Uniform motion: equal distance in equal time.

Question 3. The velocity of a body increases by 10 m/s in every one second. What physical quantity does the body represent and what is its magnitude?

Solution.

The given quantity represents change of velocity per unit time that is acceleration and its magnitude is 10 m/s2.

Teacher's Note: Acceleration is the rate of change of velocity. A velocity gain of 10 m/s each second is 10 m/s².

Exam Note: Acceleration = velocity change per second.

Question 4. Area under the velocity-time graph line is 40 m. What physical quantity does this area represent?

Solution.

The area under the velocity time graph gives the displacement of the object and its value is 40 m.

Teacher's Note: On a velocity-time graph, the area between the line and the time axis equals the displacement.

Exam Note: Area under v-t graph = displacement.

Question 5. Does the motion of second’s hand of a watch represent uniform velocity or uniform speed?

Solution.

The motion of second’s hand represent uniform speed because as it is moving in a circular motion, its direction is changing at every point and hence uniform velocity will not be the case.

Teacher's Note: The second hand moves at constant speed along a circle, but its direction changes, so velocity is not uniform.

Exam Note: Circular motion: uniform speed, changing velocity.

Question 6. A cyclist travels a distance of 4 km from P to Q and then moves a distance of 3 km at right angle to PQ. Find his resultant displacement graphically.

Solution.

PQR4 km3 km

Using Pythagoras theorem: PQ² + QR² = PR²

4² + 3² = PR²

PR² = 16 + 9 = 25

PR = 5 km

Teacher's Note: Two displacements at right angles combine by Pythagoras theorem; the resultant is the hypotenuse of the right triangle.

Exam Note: Right-angle displacements: resultant = √(a² + b²).

Question 7. Draw a diagram to show the motion of a body whose speed remains constant but the velocity changes continuously.

Solution.

A body moving in a circular path having uniform speed is a true example where speed remains constant but velocity changes because at every point the direction changes and is tangential to the circular path.

vvvvABCD

Teacher's Note: In uniform circular motion speed is constant but velocity direction changes at every point along the tangent.

Exam Note: Constant speed, changing direction: velocity changes.

Question 8. A car is moving on a straight road with a uniform acceleration. The following table gives the speed of the car at various instants of time.

Time (s)01020304050
Speed (m/s)51015202530

(i) Draw the shape of speed-time graph representing the above sets of observations.

(ii) Find the acceleration of the car.

Solution.

(i)

102030405051015202530OTime (s)Speed (m/s)ABCD

(ii) Acceleration of car = slope of line AB = \(\frac{BC}{AC}\) = \(\frac{30-5}{50-0}\) = \(\frac{25}{50}\) = 0.5 m/s²

Teacher's Note: For uniform acceleration the speed-time graph is a straight line and its slope gives the acceleration.

Exam Note: Slope of speed-time graph = acceleration.

Question 9. How can you calculate the following?

(i) Speed from distance-time graph?

(ii) Acceleration from velocity-time graph.

(iii) Displacement from velocity-time graph.

Solution.

(i) Speed is equal to the slope of the distance-time graph.

Slope = Speed = \(\frac{\text{change in distance}}{\text{change in time}}\)

0123456789100510152025303540time (s)Distance (m)+++++++++5 s20 m

(ii) Acceleration is also the slope of the velocity-time graph.

Slope = Acceleration = \(\frac{\text{change in velocity}}{\text{change in time}}\)

0123456789100510152025303540time (s)Velocity (m/s)+++++++++5 s20 m

(iii) The Magnitude of Displacement is the area under the curve of velocity time graph.

02468101202468101214Time (s)Velocity (m/s)Area = ½ × base × height

Teacher's Note: Slope of distance-time graph is speed, slope of velocity-time graph is acceleration; its area is displacement.

Exam Note: Slope: d-t gives speed, v-t gives acceleration. Area: v-t gives displacement.

Question 10. How will you show that the slope of the displacement-time graph gives the velocity of the body?

Solution.

Velocity is equal to the slope of the distance-time graph.

Slope = Velocity = \(\frac{\text{change in distance}}{\text{change in time}}\)

= \(\frac{40-20}{10-5}\) m/s

= \(\frac{20}{5}\) m/s = 4 m/s

0123456789100510152025303540time (s)Distance (m)+++++++++5 s20 m

Teacher's Note: The slope of a displacement-time graph is change in displacement divided by change in time, which is the velocity.

Exam Note: Slope of displacement-time graph = velocity.

Question 11. Given below is the velocity-time graph for the motion of the car. What does the nature of the graph show? Also, find the acceleration of the car.

51015202530352.557.51012.515OTime (min)Speed (m/s)ARCt₁t₂v₁v₂

Solution.

The graph represents a straight line which means that the object is moving with uniform acceleration.

Acceleration = \(\frac{\text{change in velocity}}{\text{change in time}}\) = \(\frac{10-7.5}{(20-15)\times60}\) = \(\frac{2.5}{300}\) ≈ 0.0083 m/s²

Teacher's Note: A straight-line speed-time graph means uniform acceleration, found from the slope after converting minutes to seconds.

Exam Note: Convert minutes to seconds before finding the slope.

Question 12. (i) If the velocity-time graph of an object is parallel to X-axis, then what does it mean? Can it be parallel to Y-axis?

(ii) What type of motion is represented by each one of the following graphs?

OTime (s)Speed (m/s)OTime (s)Speed (m/s)

(iii) A bus increases its speed from 36 km/h to 54 km/h in 10 s. Find its acceleration.

Solution.

(i) If the line is parallel to X-axis in a velocity-time graph that means that with increase in time velocity remains constant. There will be no acceleration and the body will move with constant velocity. It cannot be parallel to Y-axis because it will mean that time is constant but velocity is increasing which is practically not possible.

24681012141618102030405060OTime in secondVelocity (m/s)ABt₁t₂

(ii) The first graph represents a body which is moving with a uniform acceleration and the second graph represents a body which is moving with uniform retardation.

(iii) Initial velocity = 36 km/h = 10 m/s

Final velocity = 54 km/h = 15 m/s

Acceleration = \(\frac{\text{change in velocity}}{\text{change in time}}\) = \(\frac{15-10}{10}\) = \(\frac{5}{10}\) = 0.5 m/s²

Teacher's Note: A horizontal velocity-time line means constant velocity and zero acceleration. Sloping lines show uniform acceleration or retardation.

Exam Note: Flat v-t line: constant velocity. Sloping: uniform acceleration.

Question 13. Study the velocity-time graph and calculate.

0123456510152025OTime (s)Velocity (m/s)ABCDEF

(i) the acceleration from A to B.

(ii) the acceleration from B to C.

(iii) the distance covered in the region ABE.

(iv) the average velocity from C to D.

(v) the distance covered in the region BCFE.

Solution.

(i) Acceleration from A to B = \(\frac{\text{change in velocity}}{\text{change in time}}\) = \(\frac{25-0}{3-0}\) = 8.33 m/s²

(ii) Acceleration from B to C = \(\frac{15-25}{4-3}\) = -10 m/s²

(iii) Distance covered in the region ABE = \(\frac{1}{2}\) × base × height = \(\frac{1}{2}\) × 3 s × 25 m/s = 37.5 m

(iv) Average velocity from C to D = \(\frac{\text{initial velocity}+\text{final velocity}}{2}\) = \(\frac{15+0}{2}\) = 7.5 m/s

(v) Distance covered in the region BCFE = \(\frac{1}{2}\) × sum of parallel sides × distance between them = \(\frac{1}{2}\) × (25 + 15) × 1 = 20 m

Teacher's Note: Slope of a velocity-time graph is acceleration; the area under it is distance, found with triangle or trapezium formulas.

Exam Note: Slope = acceleration; area under graph = distance.

Question 14. Plot velocity-time graph of a body.

(i) moving with a uniform retardation.

(ii) moving with a variable acceleration.

Solution.

(i) moving with a uniform retardation and (ii) moving with a variable acceleration

OtvUniform retardation123456781357time (s)velocity (m/s)variable acceleration

Teacher's Note: Uniform retardation gives a straight falling velocity-time line; variable acceleration gives a curved velocity-time graph.

Exam Note: Straight sloping v-t line: uniform; curved line: variable acceleration.

Question 15. A body starts to slide over a horizontal surface with an initial velocity of 0.5 m/s. Due to friction, its velocity decreases at the rate 0.105 m/s2. How much time will it take for the body to stop?

Solution.

Using the first equation of motion: v = u + at

where: v = final velocity = 0 m/s

u = initial velocity = 0.5 m/s

a = acceleration = -0.105 m/s²

t = time = ??

v = u + at

0 = 0.5 - 0.105 × t

0.105 × t = 0.5

t = \(\frac{0.5}{0.105}\) s = 4.76 s

Teacher's Note: Friction slows the body: use v = u + at with negative acceleration and final velocity zero.

Exam Note: Retardation: take a negative; final velocity zero.

Question 16. Look at the figure below and answer the following questions:

StoneThread

(i) Name the kind of motion of the stone.

(ii) Is this an example of accelerated motion? Why?

(iii) Name the force that keeps the stone in its path.

(iv) What is the direction of this force? Draw it in your answer sheet.

Solution.

(i) The stone is moving with circular motion.

(ii) Yes it is an example of accelerated motion. Though the speed is constant, the direction of the velocity changes at each point, which is tangential to the circular path, so the velocity changes.

(iii) Centripetal force keeps the stone in its path.

(iv) The force is directed towards the centre of the circular path.

VelocityAxisCentripetal forceOrbit

Teacher's Note: A whirled stone moves in a circle at constant speed; its velocity direction changes, so it accelerates.

Exam Note: Centripetal force acts towards the centre of the circle.

Question 17. The figure shows an x-t graph of a particle moving along a straight line. What is the sign of the acceleration during the intervals OA, AB, BC, and CD?

ABCDOxTime tDistance

Solution.

a) In the interval OA, the curve bends downwards: the slope decreases with time, so the speed decreases and the acceleration is negative.

b) In the interval AB, the slope of the curve increases with time, so the speed increases and the acceleration is positive.

c) In the interval BC, the curve first flattens and then becomes steeper again, so the acceleration is first negative and then positive.

d) In the interval CD, the curve becomes flatter with time, so the speed decreases and the acceleration is negative.

Teacher's Note: Slope of a distance-time graph is speed: falling slope means slowing down, rising slope means speeding up.

Exam Note: Changing slope of d-t graph shows acceleration or retardation.

Question 18. Write three equations of uniformly accelerated motion. Also, state the symbols used.

Solution.

a) The first equation of motion: v = u + at

where: v = final velocity (m/s)

u = initial velocity (m/s)

a = acceleration (m/s²)

t = time (s)

b) The second equation of motion: s = ut + \(\frac{1}{2}\)at²

where: s = distance covered (m)

u = initial velocity (m/s)

a = acceleration (m/s²)

t = time (s)

c) The third equation of motion: v² – u² = 2as

where: s = distance covered (m)

v = final velocity (m/s)

u = initial velocity (m/s)

a = acceleration (m/s²)

Teacher's Note: The three equations of motion relate u, v, a, s and t for constant acceleration in a straight line.

Exam Note: Learn all three equations with symbols.

Question 19. An object starting from rest travels 20 m in the first 2s and 160 m in next 4s. What will be the velocity after 7s from the start?

Solution.

Using the second equation of motion: s = ut + \(\frac{1}{2}\)at²

where: s = distance covered = 20 m

u = initial velocity = 0 m/s

a = acceleration = ? m/s²

t = time = 2 s

20 = 0 × 2 + \(\frac{1}{2}\) × a × 2²

20 = 0 + 2 × a

a = 10 m/s²

Final velocity, v after 2 s

The first equation of motion: v = u + at

where: v = final velocity = ?

u = initial velocity = 0 m/s

a = acceleration = 10 m/s²

t = time = 2 s

v = u + at

v = 0 + 10 × 2 = 20 m/s

Now it is given that in next 4 s it covers 160 m. But now the vehicle has gained some velocity. So the final velocity of the previous case will become the initial velocity in this case.

Using the second equation of motion: s = ut + \(\frac{1}{2}\)at²

where: s = distance covered = 160 m

u = initial velocity = 20 m/s

a = acceleration = ? m/s²

t = time = 4 s

160 = 20 × 4 + \(\frac{1}{2}\) × a × 4 × 4

160 = 80 + a × 8

160 – 80 = a × 8

80 = a × 8

a = 10 m/s²

This shows that acceleration is uniform.

The first equation of motion: v = u + at

where: v = final velocity = ?

u = initial velocity = 0 m/s

a = acceleration = 10 m/s²

t = time = 7 s

v = u + at

v = 0 + 10 × 7

v = 70 m/s

Teacher's Note: Get acceleration from 2 s data, check it for the next 4 s, then use v = u + at

Exam Note: Final speed of one stage is initial speed of the next.

Question 20. Obtain a relation for the distance travelled by an object moving with a uniform acceleration in the interval between 4th and 5th second.

Solution.

Using the second equation of motion: s = ut + \(\frac{1}{2}\)at²

where: s = distance covered

u = initial velocity

a = acceleration

t = time

Distance covered in 4 s:

s₁ = ut + \(\frac{1}{2}\)at²

s₁ = u × 4 + \(\frac{1}{2}\) a × 4²

s₁ = 4u + \(\frac{16}{2}\)a ………………… equation 1

Distance covered in 5 s:

s₂ = ut + \(\frac{1}{2}\)at²

s₂ = u × 5 + \(\frac{1}{2}\) a × 5²

s₂ = 5u + \(\frac{25}{2}\)a …………………… equation 2

Distance travelled by an object between 4th and 5th sec: equation 2 – equation 1

(s₂ – s₁) = (5u + \(\frac{25}{2}\)a) - (4u + \(\frac{16}{2}\)a)

(s₂ – s₁) = 5u – 4u + \(\frac{25}{2}\)a - \(\frac{16}{2}\)a

(s₂ – s₁) = u + \(\frac{9}{2}\)a

Teacher's Note: Distance in the 5th second equals distance in 5 s minus distance in 4 s.

Exam Note: Distance in nth second = u + a(2n − 1)/2.

Question 21. Manan and Sharman went to Agra through Yamuna-Expressway. Manan started the car and accelerated, so highly that the car was running at 180 km/h within the 20s. Sharman stopped him from doing so and told him that over speeding on road was a straight invitation to life staking situation. Though Manan wanted the adventure of speeding but he was convinced by Sharman.

(i) Why do you think it is dangerous to drive fast on road?

(ii) Which values of Sharman are worth appreciating?

(iii) Find Manan’s speed in m/s.

(iv) What is the acceleration of car?

(v) What would you suggest to Manan, if you were in that car?

Solution.

(i) Over speeding on roads increases the chances of accidents which could be fatal also. Some serious injuries may happen due to this. Also they could hit some other car on the road as well.

(ii) Sharman behaved as a responsible citizen and patiently he convinced his friend not to drive like this. He is smart, intelligent, responsible as well as patient.

(iii) Speed = 180 km/h

1 km = 1000 m and 1 hour = 3600 secs

speed = \(\frac{180\times1000}{3600}\) = \(\frac{180000}{3600}\) = 50 m/s

(iv) The first equation of motion: v = u + at

where: v = final velocity = 50 m/s

u = initial velocity = 0 m/s

a = acceleration = ? m/s²

t = time = 20 s

v = u + at

50 = 0 + a × 20

a = \(\frac{50}{20}\) = 2.5 m/s²

(v) I would also suggest him to drive in the speed limit and try to make him realize the importance of life.

Teacher's Note: Convert km/h to m/s by multiplying by 1000/3600, then use v = u + at from rest to get acceleration.

Exam Note: 1 km/h = 5/18 m/s; 180 km/h = 50 m/s.

Question 22. Manoj was travelling by Metro train while Rajnish was travelling by his car towards the same destination. Manoj was surprised to reach much before Rajnish and said, since his motion was uniform, he could reach on time. However, Rajnish said that Manoj’s motion was also not uniform.

(i) Who gave a correct explanation of types of motion?

(ii) How did Manoj reach early?

(iii) Give the characteristic values of Manoj.

Solution.

(i) Rajnish gave the correct explanation as for a uniform motion the velocity should be uniform. But the metro has stopped at various stations which means that it had come to rest and its velocity at that point is zero.

(ii) Manoj had used metro which is free from the traffic jam and thus manages to reach early.

(iii) Manoj is a responsible citizen as he had used a public transport instead of the personal car which helps in conservation of fuel.

Teacher's Note: Uniform motion needs constant velocity. A metro stops at stations, so its velocity changes and its motion is non-uniform.

Exam Note: Stops and starts mean non-uniform motion.

Question 23. Neha and Priya went to market. There was no parking space left. Neha parked the car on road side and came out. Priya, however, was very concerned about traffic rules and said that the car should not be standing in ‘Tow Away Zone’. She made Neha drive to the next parking slot which was a little far from the market area.

(i) Compare and contrast the values of Neha and Priya.

(ii) What type of motion is exhibited by a car moving in the market area?

(iii) Represent a car parked in a parking area graphically on a distance- time graph.

Solution.

(i) Neha is not concerned about the traffic rules and hence does not care about the problems faced by other people. On the other hand, Priya being a responsible citizen follows the traffic rules. She understands that car being parked in a tow away zone can lead to traffic jams and can lead to chaos.

(ii) Non-uniform motion is exhibited by the car in the market area as Neha has to sometimes stop the car, sometimes move the car. The velocity is not uniform.

(iii) With the increase in time, distance remains the same which implies that the object is at rest.

OTimeDistanceABC

Teacher's Note: A parked car does not change position, so its distance-time graph is a horizontal line; the car is at rest.

Exam Note: Rest: horizontal distance-time line.

Question 1. A 100 m sprinter increases her speed from rest uniformly at the rate of 1 m/s2 upto 40 m and covers the remaining distance with a uniform speed. The sprinter covers the first half of the run in t1s and second half in t2s, then

A. t1 > t2

B. t1 < t2

C. t1 = t2

D. information given is incomplete

Solution.

For the first 40 m:

Using the third equation of motion: v² – u² = 2as

where: s = distance covered = 40 m

v = final velocity = ? m/s

u = initial velocity = 0 m/s

a = acceleration = 1 m/s²

v² – 0 = 2 × 1 × 40

v² = 80

v = 8.94 m/s

Using the first equation of motion: v = u + at

8.94 = 0 + 1 × t

t = 8.94 s for the first 40 m.

The remaining 60 m is covered with this uniform speed of 8.94 m/s.

The first half of the run is 50 m: 40 m with acceleration and the next 10 m at uniform speed.

Time for the 10 m = 10 ÷ 8.94 = 1.12 s

t₁ = 8.94 s + 1.12 s = 10.06 s

The second half is 50 m at uniform speed of 8.94 m/s.

t₂ = 50 ÷ 8.94 = 5.59 s

Since t₁ > t₂, the correct option is A.

Teacher's Note: Speed after 40 m comes from v² = 2as; the rest of the run is at that constant speed.

Exam Note: Add accelerated and uniform parts of each half separately.

Question 2. Particles P and Q are undergoing uniform horizontal circular motions along concentric circles of different radii in clockwise sense. P completes each round in 2 min while Q does it in 5 min. Time required by Q to make one revolution around P is

A. 3 min

B. 10 min

C. \(\frac{10}{3}\) min

D. This is not possible as Q is moving slower than P

Solution.

P completes \(\frac{1}{2}\) revolution per minute and Q completes \(\frac{1}{5}\) revolution per minute, both in the same sense.

Relative rate of Q with respect to P = \(\frac{1}{2}-\frac{1}{5}\) = \(\frac{3}{10}\) revolution per minute.

Time required by Q to make one revolution around P = \(\frac{10}{3}\) min. So the correct option is C.

Teacher's Note: For bodies circling the same way, Q's time to go round P depends on the difference of rotation rates.

Exam Note: Relative motion: subtract the angular speeds.

Question 3. You are sitting in a stationary car. There is a helium balloon tied to its floor. You accelerate and obviously feel like you are being pushed backwards (against the direction of your accelerations). The balloon.

A. will move forward

B. will move backward

C. will remain state

D. None of these

Solution.

Helium is less dense than the air and so it is lighter than the air, so when the car is accelerated the air starts moving backwards but as the helium is lighter it is pushed forward by the air collecting at its back. So the balloon will move forward (option A).

Teacher's Note: Helium is lighter than air, so in an accelerating car denser air at the back pushes the balloon forward.

Exam Note: Light balloon moves opposite to the pseudo-force on you.

Question 4. A boy begins to walk eastward along a street in front of his house and the graph of his position from home is shown in the following figure. His average speed for whole time interval is equal to

2040OPosition (m)-205101520Time (min)

A. 8 m/min

B. 6 m/min

C. \(\frac{8}{3}\) m/min

D. 2 m/min

Solution.

Average speed = \(\frac{\text{total distance travelled}}{\text{total time taken}}\)

= \(\frac{120}{20}\) m/min = 6 m/min

Teacher's Note: Average speed is total distance (not displacement) divided by total time, so distance travelled in each stage must be added.

Exam Note: Add distances for each stage, going back counts.

Question 5. A bus is travelling the first one-third distance at a speed of 10 km/h, the next one-fourth at 20 km/h and the remaining at 40 km/h. What is the average speed of the bus?

A. 17 km/h

B. 17.8 km/h

C. 18 km/h

D. 20 km/h

Solution.

Let the total distance be 100 km

One third of 100 km = 33.33 km

time = \(\frac{\text{distance}}{\text{speed}}\)

t₁ = \(\frac{33.33}{10}\) = 3.33 hr

Next one fourth of 100 km = 25 km

t₂ = \(\frac{25}{20}\) = 1.25 hr

Remaining distance = 100 km – 33.33 km – 25 km = 41.67 km

t₃ = \(\frac{41.67}{40}\) = 1.04 hr

t₁ + t₂ + t₃ = 5.62 hr

Average speed = \(\frac{\text{(total distance travelled)}}{\text{total time taken}}\) = \(\frac{100}{5.62}\) = 17.8 km/hr

So the correct option is B.

Teacher's Note: Average speed is total distance over total time; get each time from distance ÷ speed and add.

Exam Note: Never average speeds directly; use total distance ÷ total time.

Question 6. A car A is travelling on a straight level road with a uniform speed of 60 km/h. It is followed by another car B. Which is moving with a speed of 70 km/h. When the distance between them is 2.5 km, the car B is given a deceleration of 20 km/h². After how much time will B catch up with A?

A. 1 h

B. \(\frac{1}{2}\) h

C. \(\frac{1}{4}\) h

D. \(\frac{1}{8}\) h

Solution.

Distance covered by car A in time t is, s₁ = 60t

For car B:

Using the second equation of motion: s = ut + \(\frac{1}{2}\)at²

where: s = distance covered = s₂

u = initial velocity = 70 km/h

a = acceleration = -20 km/h²

t = time = t

s₂ = 70t + \(\frac{1}{2}\) × (-20) × t²

s₂ = 70t – 10t²

But it is given that s₂ – s₁ = 2.5 km

70t – 10t² – 60t = 2.5

10t – 10t² = 2.5

t – t² = 0.25

t² – t + 0.25 = 0

(t – 0.5)² = 0

t = 0.5 hr

So the correct option is B.

Teacher's Note: Equate the extra distance covered by car B (decelerating) to the 2.5 km gap using s = ut + ½at².

Exam Note: Catch-up: distance of B minus distance of A equals the gap.

Question 7. A sprinter has to cover a total run of 100 m. She increases her speed from rest under a uniform acceleration of 1.0 m/s² up to three quarters of the total run and covers the last quarter with uniform speed. The time she takes to cover the first half, and to cover the second half of the run will be

A. 3.25 s

B. 4.25 s

C. 5.25 s

D. 6.25 s

Solution.

Speed at the end of 75 m: v² – u² = 2as, v² = 2 × 1 × 75 = 150, v = 12.25 m/s

First half (50 m): s = ut + \(\frac{1}{2}\)at², 50 = \(\frac{1}{2}\) × 1 × t², t² = 100, t = 10 s

Time to cover 75 m: 75 = \(\frac{1}{2}\) × 1 × t², t² = 150, t = 12.25 s

Time taken from 50 m to 75 m = 12.25 s – 10 s = 2.25 s

Last 25 m at uniform speed 12.25 m/s: time = 25 ÷ 12.25 = 2.04 s

Time for the second half = 2.25 s + 2.04 s = 4.29 s, which is closest to 4.25 s (option B). The first half takes 10 s.

Teacher's Note: Use s = ½at² and v² = 2as for the accelerated 75 m, then add the uniform-speed part.

Exam Note: Split the run at 50 m, 75 m and 100 m.

Question 8. A bus begin to move with an acceleration of 1 m/s². A man who is 48 m behind the bus starts running at 10 m/s to catch the bus. The man will be able to catch the bus after.

A. 8 s

B. 5 s

C. 6 s

D. 7 s

Solution.

For bus:

Using the second equation of motion: s = ut + \(\frac{1}{2}\)at²

where: s₁ = distance covered = ? m

u = initial velocity = 0 m/s

a = acceleration = 1 m/s²

t = time = t s

s₁ = 0 × t + \(\frac{1}{2}\) × 1 × t² = t²/2

Distance travelled by the man, s₂ = 10t

s₂ – s₁ = 48 m

10t – t²/2 = 48

20t – t² = 96

20t – t² – 96 = 0

t² – 20t + 96 = 0

(t – 12)(t – 8) = 0

t = 12 s or 8 s

The man catches the bus for the first time after 8 s (option A).

Teacher's Note: The man covers the bus distance plus the 48 m gap in the same time; solve the quadratic.

Exam Note: Man's distance = bus distance + initial gap.

Question 9. Which graph represents a state of rest for an object?

stA.vtB.atC.stD.

Solution.

With increase in time distance remains constant which means it is not moving. So the correct option is D.

Teacher's Note: On a distance-time graph, a horizontal line means the distance does not change, so the object is at rest.

Exam Note: Rest: horizontal distance-time (s-t) line.

Class 9 Mathematics: All In One Solutions for All In One Solutions Class 9 Science Chapter 8 Motion

Access Class 9 Mathematics Solutions

Review detailed solutions for Class 9 Mathematics. The All In One Solutions Class 9 Science Chapter 8 Motion PDF provides comprehensive answers mapped to standard All In One Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with All In One Solutions

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Additional Study Materials for 2026

In addition to these All In One Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 9 Science?

They are chapter-wise solved questions from the book for Class 9 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 9 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 9 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 9 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 9 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.