Multiple Choice Questions (MCQs) for Class 11 Physics: Chapter 01 Units and Measurement
Explore reliable objective questions for Chapter 01 Units and Measurement tailored for Class 11 learners. Utilizing these Physics multiple-choice formats ensures thorough preparation and strengthens problem-solving speed for upcoming school assessments.
Practice Chapter 01 Units and Measurement MCQs for Class 11 Physics
Access the complete set of multiple-choice questions for Chapter 01 Units and Measurement below. This focused format allows students to isolate specific topics for thorough review and uninterrupted practice alongside official CBSE textbooks.
Question. Physical quantities are
(a) quantities such as degrees, radians and steradians
(b) quantities such as length, mass, time, electric current, thermodynamic temperature, amount of substance, and luminous intensity
(c) quantities such as pounds, dollars and rupees
(d) quantities such as kilos, pounds and gallons
Answer: b
Question.The acceleration of a car is 10 mile per hour second. The same in ft/s is :
(a) 1.467 ft/s2
(b) 14.67 ft/s2
(c) 40 ft/s2
(d) none of these
Answer: a
Question. The numbers 2.745 and 2.735 on rounding off to 3 significant figures will give
(a) 2.75 and 2.74
(b) 2.74 and 2.73
(c) 2.75 and 2.73
(d) 2.74 and 2.74
Answer: d
Question. One slug is equivalent to 14.6 kg. A force of 10 pound is applied on a body of one kg. The acceleration of the body is :
(a) 44.5 m/s2
(b) 4.448 m/s2
(c) 44.4 ft/s2
(d) none of these
Answer: a
Question. One horse power is equal to :
(a) 746 watt
(b) 756 watt
(c) 736 watt
(d) 766 watt
Answer: a
Question. Refer the data from above question. The value of R in calorie per °C mol is :
(a) 2 cal/mol °C
(b) 4 cal/mol °C
(c) 6 cal/mol °C
(d) 8.21 cal/mol °C
Answer: a
Question. 4.32 x 2.0 is equal to :
(a) 8.64
(b) 8.6
(c) 8.60
(d) 8.640
Answer: b
Question. If C and R denote capacitance and resistance respectively, what will be the dimensions of CxR?
(a) [M0L0TA0]
(b) [ML0TA-2]
(c) [ML0TA2]
(d) [MLTA-2]
Answer: a
Question.The unit of intensity of a wave is W/m ? What are dimensions of intensity of wave ?
(a) [M T -3]
(b) [A ML0T-2]
(c) [M0L-1T-2]
(d) None of these
Answer: a
Question. Which of the following sets of quantities has the same dimensional formula?
(a) Frequency, angular frequency and angular momentum
(b) Surface tension, stress and spring constant
(c) Acceleration, momentum and retardation
(d) Work, energy and torque
Answer: d
Question. Resolution is
(a) a measure of the bias in the instrument
(b) None of these
(c) the smallest amount of input signal change that the instrument can detect reliably
(d) a measure of the systematic errors
Answer: d
Question.1 mm of Hg pressure is equivalent to one torr and one torr is equivalent to 133.3 N/m2. The atmospheric pressure in mm of Hg pressure is :
(a) 70 mm
(b) 760 mm
(c) 3.76 mm
(d) none of these
Answer: b
Question. Which of the following units denotes the dimensions [ML2/Q2], where Q represents the electric charge?
(a) Wb/m²
(b) Henry(H)
(c) H/m²
(d) Weber(Wb)
Answer: b
Question. The number of molecules of H20 in 90 g of water is :
(a) 35.6 x 1023
(b) 41.22 x 1023
(c) 27.2 x 1023
(d) 30.11 x 1023
Answer: d
Question. 4.338 + 4.835 x 3.88 + 3.0 is equal to :
(a) 10.6
(b) 10.59
(c) 10.5912
(d) 10.591267
Answer: a
Question. Generally, sugar cubes are added to coffee. A typical sugar cube has an edge of length of 1 cm. Minimum edge length of a cubical box containing one mole of the sugar cubes is:
(a) 840 km
(b) 970 km
(c) 780 km
(d) 750 km
Answer: a
Question. The optical path difference is defined as Δ x = 2π/λ What are dimensions of optical path difference ?
(a) [M0L-1 T0]
(b) [MLT0 ]
(c) [ML0T]
(d) [M L-2 T]
Answer: a
Question. Universal time is based on :
(a) rotation of earth on its axis
(b) oscillation of quartz crystal
(c) vibration of caesium atom
(d) earth's orbital motion around the sun
Answer: a
Question. One nautical mile is 6080 ft. The same in kilometre is :
(a) 0.9 km
(b) 0.8 km
(c) 1.85 km
(d) none of these
Answer: c
Question. The dimensions of heat capacity is :
(a) [L2T-2θ-1]
(b) [ML2T-2θ-1]
(c) [M-1L2T-2θ-1]
(d) none of these
Answer: b
Question. The dimensions of wavelength is :
(a) [M0L0T0]
(b) [M0LT0]
(c) [M0L-1 T0]
(d) none of these
Answer: b
Question. The dimensional formula of radius of gyration is :
(a) [M0L0 T°]
(c) [M0LT0]
(b) [M0L0T]
(d) none of these
Answer: c
Question. Which of the following pairs has the same dimensions?
(a) specific heat and latent heat
(b) lmpulse and momentum
(c) surface tension and force
(d) moment of lnertia and torque
Answer: b
Question. The concorde is the fastest airlines used for commercial service. It can cruise at 1450 mile per hour (about two times the speed of sound or in other words, mach 2). What is it in m/s ?
(a) 644.4 m/s
(b) 80 m/s
(c) 40 m/s
(d) None of these
Answer: a
Question. The velocity of the body within the error limits, if a body travels uniformly a distance of (13.8 ± 0.2) m in a time (4.0 ± 0.3), is :
(a) (3.45 ± 0.2) m/s
(b) (3.45 ± 0.4) m/s
(c) (3.45 ± 0.3) m/s
(d) (3.45 ± 0.5) m/s
Answer: c
Question. 1.00 x 2.88 is equal to:
(a) 2.88
(b) 2.880
(c) 2.9
(d) none of these
Answer: a
Question. The maximum static friction on a body is F = μN. Here, N = normal reaction force on the bodyμ. = coefficient of static frictionThe dimensions of p is :
(a) [MLT-2]
(b) [M0L0T0 θ-1]
(c) dimensionless
(d) none of these
Answer: c
Question.1 revolution is equivalent to 360°. The value of 1 revolution per minute is :
(a) 2 π rad/s
(b) 0.1047 rad/s
(c) 3.14 rad/s
(d) none of these
Answer: b
Question. While measuring the diameter of a wire by screw gauge, three readings were taken are 1.002 cm, 1.004 cm and 1.006 cm. The absolute error in the third reading is :
(a) 0.002 cm
(b) 0.004 cm
(c) zero
(d) 1.002 cm
Answer: a
Free study material for Physics
Multiple Choice Questions (MCQs) for Class 11 Physics Chapter 01 Units and Measurement
Chapter MCQs with Answers for Class 11 Physics
Test your conceptual understanding of Chapter 01 Units and Measurement with these targeted multiple-choice questions. Designed in alignment with the latest CBSE curriculum for Class 11 Physics, these problem sets build accuracy and prepare students for objective exams.
Expert Practice Material for Class 11 Physics
Cross-reference your completed choices with comprehensive NCERT solutions for Class 11 Physics to ensure absolute clarity across all sub-topics in this chapter.
Complete Your Chapter Revision
Follow up your worksheet practice by attempting the interactive online Physics MCQ test for this chapter to evaluate your execution speed. All platform resources are free to access.
FAQs
You can get most exhaustive CBSE Class 11 Physics Units and Measurements MCQs Set 04 for free on StudiesToday.com. These MCQs for Class 11 Physics are updated for the 2026-27 academic session as per CBSE examination standards.
Yes, our CBSE Class 11 Physics Units and Measurements MCQs Set 04 include the latest type of questions, such as Assertion-Reasoning and Case-based MCQs. 50% of the CBSE paper is now competency-based.
By solving our CBSE Class 11 Physics Units and Measurements MCQs Set 04, Class 11 students can improve their accuracy and speed which is important as objective questions provide a chance to secure 100% marks in the Physics.
Yes, Physics MCQs for Class 11 have answer key and brief explanations to help students understand logic behind the correct option as its important for 2026 competency-focused CBSE exams.
Yes, you can also access online interactive tests for CBSE Class 11 Physics Units and Measurements MCQs Set 04 on StudiesToday.com as they provide instant answers and score to help you track your progress in Physics.