Evergreen Solutions Class 10 Science Chapter 3 Metals And Non Metals

Step-by-Step Solutions for Class 10 Science Chapter 03 Metals And Non Metals

Access comprehensive textbook solutions for Chapter 03 Metals And Non Metals using the reference material for Class 10 Science. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 03 Metals And Non Metals Textbook Solutions PDF

View or download the dedicated Chapter 03 Metals And Non Metals solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Science.

3. Metals and Non-Metals

Periodic Test

Question 1. Name one metal and one non-metal that exists in liquid state at room temperature.

Solution.

Mercury is a metal that exists in liquid state at room temperature. Bromine is the non-metal that exists in liquid state at room temperature.

Teacher's Note: Gallium and caesium melt just above room temperature, so mercury is the only common liquid metal.

Exam Note: One metal (Hg), one non-metal (Br); one mark each.

Question 2. Why metals can act as reducing agents while non-metal cannot?

Solution.

Metals act as reducing agents because they have a tendency to lose electrons easily (they donate electrons), so they are oxidised and reduce other substances. Highly reactive metals can also displace less reactive metals from their compounds. Non-metals tend to gain electrons, so they do not behave as reducing agents.

Teacher's Note: Reducing agent means electron donor; metals have few valence electrons that they lose readily.

Exam Note: Give electron loss as the reason, not just displacement.

Question 3. What type of oxides are formed by?
(a) Metals
(b) Non-metals?

Solution.

(a) Metals form oxides (metallic oxides) which are basic in nature. Some examples are Na2O, K2O etc.

(b) Non-metals form oxides (non-metallic oxides) which are acidic in nature. Some non-metallic oxides are NO2, SO2.

Teacher's Note: Exceptions exist: Al2O3 and ZnO are amphoteric; CO and water are neutral oxides.

Exam Note: Basic for metals, acidic for non-metals, with examples.

Question 4. Name two non-metals which are lustrous.

Solution.

Iodine and carbon are non-metals which are lustrous. Note that carbon is lustrous only in certain forms like diamond, and graphite.

Teacher's Note: Lustre is usually a metallic property; iodine crystals and diamond are common exceptions.

Exam Note: Name iodine and a carbon form such as diamond.

Question 5. Name two metals:
(a) which have very low melting points,
(b) which are so soft that they can be cut with a knife.

Solution.

(a) Gallium and Caesium are two metals which have very low melting points. The melting point is so low that they start to melt if kept in our palms.

(b) Sodium and potassium are two metals which are soft and can be cut with a knife. They belong to the group of alkali metals (Group 1 elements).

Teacher's Note: Most metals are hard with high melting points; alkali metals and gallium are exceptions.

Exam Note: Two examples for each part; avoid naming mercury for (a).

Question 6. Name two metals:
(a) which are best conductors of heat,
(b) which are comparatively poor conductors of heat.

Solution.

(a) Silver and copper are the best conductors of heat.

(b) Mercury and lead are two poor conductors of heat.

Teacher's Note: Silver is the best conductor, copper second; lead and mercury conduct poorly.

Exam Note: Silver and copper; lead and mercury.

Question 7. What is meant by malleability? Name two most malleable metals.

Solution.

The property of metals which allow them to be beaten into thin sheets is called malleability. Gold and silver are the most malleable metals.

Teacher's Note: Malleable means hammered into sheets; ductile means drawn into wires. Do not interchange them.

Exam Note: Define in one sentence and name gold and silver.

Question 8. What is meant by ductility? Name two most ductile metals.

Solution.

The ability of the metals to be drawn into thin wires is known as ductility. Gold and platinum are the most ductile metals.

Teacher's Note: Gold is so ductile that one gram can be drawn into a wire about 2 km long.

Exam Note: Definition plus two metals; gold first.

Question 9. Name two metal oxides which are:
(a) water soluble
(b) insoluble in water.

Solution.

(a) Sodium oxide (Na2O), potassium oxide (K2O) are metal oxides which are water soluble.

(b) Copper (II) oxide (CuO), Beryllium oxide (BeO) are metal oxides which are water insoluble.

Teacher's Note: Soluble metal oxides give alkalis; copper(II) oxide is CuO, while Cu2O is copper(I) oxide.

Exam Note: Give correct formulae; CuO for copper(II) oxide.

Question 10. What is meant by anodising? Why is it done?

Solution.

The process of coating an oxide layer over a metal is called anodising. Usually, aluminium is selected as the metal, and the oxide coating will be aluminium oxide. Anodising is done to make the metal resistant to further corrosion.

Teacher's Note: Aluminium is made the anode in dilute acid; oxygen formed there thickens the oxide layer.

Exam Note: Define, name aluminium, and give purpose: corrosion resistance.

Question 11. Write the electron-dot structure for Na and Cl atoms. How do these form a chemical bond? Name the type of bond so formed. Why does a compound so formed have high melting point?

Solution.

The reactivity of the elements is determined by the tendency to have a completely filled valence shell. The electron dot structure of Na (sodium) and Cl (chlorine) atoms are shown in the figure below.

Na has to lose the outermost electron, and Cl needs one electron to complete the valence shell. By losing an electron, Na becomes Na+ (cation) and this electron is accepted by Cl to form Cl- (anion). The oppositely charged ions attract each other and form NaCl. They are held together by strong electrostatic forces of attraction. The bond existing between them is called an ionic bond.

Since the inter-ionic forces are very strong, it requires a considerably large amount of energy to break the bond. Hence, ionic compounds have high melting point.

NaCl×××××××Sodium atom (2,8,1)Chlorine atom (2,8,7)
Na+Cl×××××××(Na⁺)Cl×××××××−Sodium chloride (Na⁺ Cl⁻), ionic bond

Teacher's Note: Sodium has configuration 2,8,1 and chlorine 2,8,7; both reach an octet by transferring one electron.

Exam Note: Draw dot structures, show transfer, name ionic bond, explain melting point.

Question 12. Differentiate between metals and non-metals with respect to their chemical properties.

Solution.

The properties of metals and non-metals are given in the form of a table shown below. The properties mentioned here apply to the metals and non-metals generally. However, all metals and non-metals may not obey the given properties; there might be exceptions.

MetalsNon-metals
Contain 1-3 electrons in their valence shellContain 4-8 electrons in their valence shell
Lose electrons to achieve stable electronic configurationAccept electrons to achieve stable electronic configuration
Possess low electronegativityPossess high electronegativity
Combine with oxygen to form metallic oxides which are generally basic in nature.Combine with oxygen to form non-metallic oxides which are acidic or neutral in nature.
Metal + Water → Metal oxide + HydrogenNon-metal + Water → No reaction
Metal + Acid → Salt + HydrogenNon-metal + Acid → No reaction

Teacher's Note: The book's last row repeated 'Non-metal + Water'; it should read Non-metal + Acid, corrected here.

Exam Note: Four to five matched properties in table form earn full marks.

Question 13. Differentiate between roasting and calcination.

Solution.

The process of heating a sulphide ore strongly in the presence of excess air is called roasting.

The process of heating a carbonate ore strongly in the presence of limited air is called calcination.

Teacher's Note: Roasting gives oxide plus SO2; calcination gives oxide plus CO2. Both convert ore to oxide.

Exam Note: Contrast ore type and air supply in a table.

Question 14. Define the following terms:
(a) Alloy
(b) Corrosion.

Solution.

(a) An alloy is a homogenous mixture of two or more metals, mixed in a suitable proportion.

(b) Corrosion is the process of destruction of a material caused by chemical reactions between the material and the surrounding environment.

Teacher's Note: Alloys can include a non-metal such as carbon in steel; brass, bronze and solder are common ones.

Exam Note: Definitions in one line each; add an example.

Question 15. What happens when:
(a) iron reacts with steam?
(b) calcium and potassium are put in water?

Solution.

(a) Iron (II) oxide (FeO), as well as iron (III) oxide (Fe2O3), are oxides of iron. When iron reacts with steam, both oxides are formed and the product is in a combined form (FeO.Fe2O3 or Fe3O4).

3Fe(s) + 4H2O(g) → Fe3O4(s) + 4H2(g)

(b) Calcium and potassium are two highly reactive metals in the reactivity series.

Potassium reacts very violently with water, and hydrogen is released. The reaction is so exothermic that the evolved hydrogen catches fire immediately.

2K(s) + 2H2O(l) → 2KOH(aq) + H2(g) + heat energy

The reaction of calcium with water is not as violent as the above reaction. The heat evolved is not sufficient for the hydrogen to catch fire. Also, calcium starts floating because the bubbles of hydrogen gas formed stick to the surface of calcium.

Ca(s) + 2H2O(l) → Ca(OH)2(aq) + H2(g)

Teacher's Note: Iron reacts with steam, not cold water; the product Fe3O4 is magnetic oxide.

Exam Note: Balanced equations and observations (fire, floating) earn the marks.

Question 16. Show the formation of:
(a) MgO
(b) Na2O by the transfer of electrons.

Solution.

(a) Magnesium loses two electrons to attain a noble gas configuration, whereas oxygen gains two electrons to completely fill the valence shell.

Mg → Mg2+ + 2e–

O + 2e– → O2–

(b) Sodium loses one electron to have a completely filled valence shell, whereas oxygen gains two electrons to complete the valence shell. Two sodium atoms are needed for one oxygen atom.

Na → Na+ + e–

O + 2e– → O2–

Mg+O××××××(Mg²⁺)O××××××2−Magnesium oxide (Mg²⁺ O²⁻)
NaNa+O××××××(Na⁺)₂O××××××2−Sodium oxide (2 Na⁺, O²⁻)

Teacher's Note: Total charge must balance: Mg2+ with O2-, and 2Na+ with O2-.

Exam Note: Show dot-cross diagram with arrows and charges.

Question 17. Why do ionic compounds:
(a) are hard and solids?
(b) conduct electricity in their aqueous solution form or molten state?

Solution.

(a) Ionic compounds are made up of oppositely charged ions which are held together by strong electrostatic force of attraction. Due to this reason, they are hard solids. When large pressure is applied, they tend to break into pieces.

(b) Conduction of electricity is achieved by the movement of charged particles. In the molten state or in their aqueous solution form, ionic compounds contain ions which can move freely throughout the solution/molten liquid, which helps in conducting electricity.

Teacher's Note: In solid state ions are locked in position, so solid ionic compounds do not conduct.

Exam Note: Mention strong attraction for (a) and free ions for (b).

Question 18. How are the following metals reduced:
(a) Metals which are highly reactive?
(b) Metals which are in the middle of the reactivity series?

Solution.

(a) Highly reactive metals (e.g., sodium, potassium) are reduced from their compounds by electrolytic reduction. By electrolyzing the chlorides or oxides of these metals in molten state, the pure metal is deposited at the cathode. At the cathode: Na+ + e– → Na; at the anode: 2Cl– → Cl2 + 2e–.

(b) Metals which come in the middle of the reactivity series are reduced from their compound using any of the following techniques.

i. If the compound is a metal oxide, then it is reduced to the corresponding metals by reduction using carbon (coke) in the presence of heat.

ii. If the compound is a metal carbonate, then it is converted into corresponding metal oxide by strongly heating it in the limited air (calcination). Later, metal oxides are reduced to metals using carbon.

iii. If the compound is a metal sulphide, then it is converted into corresponding metal oxide by strongly heating it in excess air (roasting). Then the metal oxide obtained is reduced to metal using carbon.

+−BatteryCl₂(g)Molten NaClCl⁻Na⁺Anode (+)Cathode (−)e⁻

Teacher's Note: Carbon cannot reduce Na or K oxides; their strong bond to oxygen demands electrolysis.

Exam Note: Electrolysis for (a); carbon reduction after roasting or calcination for (b).

Question 19. How you will obtain the following metals:
(a) mercury from cinnabar?
(b) Copper from its ore copper glance?

Solution.

(a) Cinnabar (HgS - mercury (II) sulphide or mercuric sulphide) is an ore of mercury. It is heated in air to give mercuric oxide (HgO). Mercuric oxide is further heated to get mercury. The reactions involved are,

2HgS(s) + 3O2(g) —(heat)→ 2HgO(s) + 2SO2(g)

2HgO(s) —(heat)→ 2Hg(s) + O2(g)

(b) Copper glance is a sulphide ore of copper (Cu2S). So it is converted to cuprous oxide (Cu2O) by just heating in air. Cuprous oxide is reduced to copper using carbon (or by reacting with the remaining Cu2S). The reactions involved are,

2Cu2S(s) + 3O2(g) —(heat)→ 2Cu2O(s) + 2SO2(g)

2Cu2O(s) + Cu2S(s) —(heat)→ 6Cu(s) + SO2(g)

Teacher's Note: Mercury is unusual: its oxide decomposes on heating alone, no reducing agent needed.

Exam Note: Roasting equation first, then reduction equation; balance both.

Question 20. What happens when:
(a) manganese dioxide is heated with aluminium powder?
(b) iron (III) oxide is heated with aluminium powder?

Solution.

(a) When manganese dioxide (MnO2) is heated with aluminium powder, displacement reaction takes place, and manganese is obtained as the product along with aluminium oxide. It is an exothermic reaction and hence Mn is obtained in molten form.

3MnO2(s) + 4Al(s) → 3Mn(l) + 2Al2O3(s) + heat

(b) Iron (III) oxide is heated with aluminium powder to form iron and aluminium oxide. This is another example of a displacement reaction and is highly exothermic. This reaction is also known as thermit reaction.

Fe2O3(s) + 2Al(s) → 2Fe(l) + Al2O3(s) + heat

Teacher's Note: Aluminium is more reactive than Mn and Fe, so it displaces them; molten iron welds rail tracks.

Exam Note: Both equations balanced; name thermit reaction in (b).

Question 21. How will you extract metal M from its enriched sulphide ore, if M is in the middle of the reactivity series? Write various steps used in extracting this metal.

Solution.

For a metal in the middle of the reactivity series, having a sulphide ore, the following processes are done to extract the metal M.

i. The ore might contain impurities (also called gangue) which must be removed before the extraction of metal.

ii. The metal sulphide ore is subjected to strong heating in excess air. This process is called roasting, and it converts the metal sulphide to the corresponding metal oxide. The reaction can be represented as:

2MS + 3O2 —(heat)→ 2MO + 2SO2

iii. Now, the metal oxide is reduced to the metal M using suitable reducing agents like C (coke) in the presence of heat.

MO + C —(heat)→ M + CO

iv. Once the extraction is complete, M is subjected to various refining processes to remove impurities from the metal.

Teacher's Note: Sequence matters: concentrate, roast to oxide, reduce with carbon, then refine.

Exam Note: List steps in order with the two general equations.

Question 22. What is a reactivity series? Describe an activity to develop a reactivity series.

Solution.

A reactivity series is a list of metals which are arranged in the order of their decreasing activity. This means the metal at the top of the series is the most reactive and the metal at the bottom of the list is the least reactive metal.

To develop a reactivity series, take pieces of different metals (e.g., iron, copper, zinc etc) and the salt solutions of those metals (i.e., iron sulphate, copper sulphate, zinc sulphate etc).

Add a metal piece to a different metal salt solution. Check for any colour changes in the solution or to the metal piece and record your observations.

One can tell that for metals A and B if the following reaction occurs,

Metal A + salt solution of B → metal B + salt solution of A

Then, metal A is more reactive than B. Similarly by trying out various combinations of metals with metal salt solutions, one can create a reactivity series.

Teacher's Note: A more reactive metal displaces a less reactive one from its salt solution; no change means no displacement.

Exam Note: State the activity with observation and the conclusion drawn.

Question 23. How electrolytic refining of copper is carried out? Explain in detail.

Solution.

The electrolytic refining of copper is done using the apparatus shown in the figure below.

This is a standard electrolysis setup, where the impure copper (the sample to be refined) is placed as anode and a thin strip of pure copper is placed as cathode. The electrolyte used is copper sulphate solution (acidified). When current is passed through the electrolyte, pure copper content from anode dissolves into the electrolyte, and the same amount of copper is deposited on the cathode. One can see that the thickness of the cathode increases.

The soluble impurities present in the anode goes into the solution when the current flows through the setup. The insoluble impurities present in the anode settle down at the bottom of the anode and is called anode mud. Thus, one can refine copper electrolytically.

+−Anode(impure copper)Cathode(pure copper)CuSO₄ solutionAnode mud

Teacher's Note: At the anode Cu → Cu2+ + 2e–; at the cathode Cu2+ + 2e– → Cu.

Exam Note: Labelled diagram: anode impure, cathode pure, CuSO4, mud.

Question 24. Define the following:
(a) Amalgam
(b) Ore
(c) Mineral.

Solution.

(a) An alloy of mercury with another metal is called amalgam.

(b) Mineral which contains a very high percentage of a metal and from which the metal can be economically extracted is called an ore.

(c) An element or compound which occurs naturally in the Earth's crust is called a mineral.

Teacher's Note: All ores are minerals but not all minerals are ores; economics decides.

Exam Note: Three crisp definitions; mention economical extraction for ore.

Question 25. What is meant by corrosion? How corrosion is caused? How it can be prevented? What is the effect of corrosion on:
(a) copper?
(b) silver?

Solution.

Corrosion refers to the destruction or deterioration of a substance due to its interactions with the surrounding environment. Corrosion is a natural process and occurs when the substance is in contact with air, water, chemicals like acid etc. Corrosion can damage metals causing it to lose properties such as strength and conductivity of heat/electricity.

Corrosion can be prevented by various techniques like painting the surface of the material, galvanizing, oiling, greasing etc.

(a) Copper when in contact with moist carbon dioxide in air gains a green coloured coat over copper. This coat is nothing but basic copper carbonate formed by the reaction of copper with moisture and carbon dioxide.

(b) Silver reacts with sulphur present in the air to form a black coating of silver sulphide over the surface of silver.

Teacher's Note: Rusting of iron needs both air and moisture; copper turns green, silver black.

Exam Note: Define, cause, prevention, then colour change for each metal.

Question 26. (a) Make a flowchart to explain the various steps involved in the extraction of metals from ores.
(b) Give four characteristics of ionic compounds.
OR
Give reasons only:
(a) Na, K and Li are stored under oil.
(b) Pt, Au and Ag are used to make jewellery.
(c) Hydrogen gas is not evolved when metals react with nitric acid.
(d) Aluminium is a reactive metal, yet it is used to make utensils for cooking.
(e) Aqueous copper sulphate solution should not be stored in an iron container.

Solution.

(a) Flowchart: Extraction of metals from ores (see figure).

(b) The characteristics of ionic compounds are,

i. Ionic compounds are hard solids. They are brittle in nature.

ii. They have high melting and boiling point.

iii. They are generally soluble in water, but they do not dissolve in solvents like kerosene, petrol etc.

iv. Ionic compounds conduct electricity in their molten/dissolved form. They do not conduct electricity in their solid form.

OR

(a) Na, K and Li react vigorously with air and water. Hence they cannot be kept in open or in water. They do not react with oil or kerosene. They are stored under oil to avoid contact with air and water.

(b) Pt, Au and Ag are lustrous. They shine brightly when light falls on them. Besides, these metals are easily malleable and ductile to make chains, rings, and so on. Thus they are used in jewellery.

(c) Nitric acid is a strong oxidizing agent. The hydrogen gas obtained from the reaction is quickly oxidized to water (H2O).

(d) Aluminium is a light metal. It is a good conductor of heat. It has a relatively high melting point. Due to the reactivity of aluminium, it combines with oxygen to form a layer of aluminium oxide over the surface of aluminium. This oxide layer prevents it from further reactivity of the metal. All these reasons make aluminium useful in making cooking utensils.

(e) Iron is more reactive than copper. So iron would displace copper from its salt solutions. In this case, the following reaction will occur:

Fe + CuSO4 → FeSO4 + Cu

Hence, there will no longer be copper sulphate solution in the container. It is advised to store chemicals with containers made of less reactive metals.

Ore (Concentration of Ores)Metals of high reactivityMetals of medium reactivityMetals of least reactivityElectrolysis of molten orePure metalCarbonate oreSulphide oreCalcinationRoastingOxide of metalReduction to metalPurificationSulphide oreRoastingMetalPurification

Teacher's Note: Choose the branch (reason-based OR) matching your strength; reasons need one scientific point each.

Exam Note: Flowchart branches by reactivity; reasons need one clear cause each.

Comprehensive Exercises (MCQ)

Question 1. Which of the following pairs will give displacement reactions?
A. NaCl solution and copper metal
B. MgCl2 solution and aluminium metal
C. FeSO4 solution and silver metal
D. AgNO3 solution and copper metal

Solution.

Answer: D. A metal which has high reactivity can displace a metal with low reactivity from its salt solution. The order of reactivity is Na > Ca > Mg > Al > Fe > Cu > Ag. Copper is more reactive than silver, so copper displaces silver from AgNO3.

Teacher's Note: Check that the free metal is above the metal in the salt in the series.

Exam Note: The free metal must be more reactive than the salt's metal.

Question 2. Which of the following methods is suitable for preventing an iron frying pan from rusting?
A. Applying grease
B. Applying paint
C. Applying a coating of zinc
D. All of these

Solution.

Answer: C. Grease and paint would burn off on heating, so they are unsuitable for a frying pan. The most suitable method is to apply a coating of zinc (galvanisation).

Teacher's Note: Think about heat: grease and paint would burn off a frying pan.

Exam Note: Pick the method that survives heat: zinc coating.

Question 3. An element reacts with oxygen to give a compound with a high melting point. This compound is also soluble in water. The element is likely to be:
A. Calcium
B. Carbon
C. Silicon
D. Iron

Solution.

Answer: A. Metal oxides have relatively high melting points. Here both iron and calcium are metals, but iron oxide is insoluble in water, while calcium oxide dissolves (reacting to form calcium hydroxide).

Teacher's Note: Carbon and silicon oxides are not both high melting and water soluble.

Exam Note: Eliminate non-metals, then check oxide solubility.

Question 4. Food cans are coated with tin and not with zinc because:
A. Zinc is costlier than tin
B. Zinc has a higher melting point than tin
C. Zinc is more reactive than tin
D. Zinc is less reactive than tin.

Solution.

Answer: C. Zinc is a highly reactive metal, and it might react with the contents of the can. Metals of low reactivity are used for food cans.

Teacher's Note: Reactive zinc would react with food acids and contaminate it.

Exam Note: Reason is reactivity, not cost or melting point.

Question 5. The electrical conductivity and melting point of an alloy is:
A. Less than that of pure metal
B. More than that of pure metal
C. Equal to that of pure metal
D. Electrical conductivity is less and melting point is more than that of pure metal.

Solution.

Answer: A. An alloy is composed of different metals mixed in a certain proportion. Alloys generally have lower electrical conductivity and a lower melting point than the pure metals they are made from.

Teacher's Note: Solder, a lead-tin alloy, melts below both pure metals; this is why it is useful.

Exam Note: Alloys: lower conductivity and lower melting point.

Question 6. Brass is an alloy of:
A. Copper and zinc
B. Copper and tin
C. Copper and nickel
D. Copper and lead.

Solution.

Answer: A. Brass is an alloy of copper and zinc and is used in making locks, gears, etc.

Teacher's Note: Brass: Cu and Zn; bronze: Cu and Sn. Students swap them often.

Exam Note: Memorise brass, bronze and solder compositions.

Question 7. Solder is an alloy of lead and tin. It has a:
A. Low melting point and is used for welding electrical wires together.
B. Low melting point and is used for welding heavy iron machinery.
C. High melting point and is used for welding electrical wires together.
D. High melting point and is used for welding heavy iron machinery.

Solution.

Answer: A. Solder has a low melting point, and upon giving a small amount of heat, it turns into liquid and solidifies on cooling, so it is used for joining electrical wires.

Teacher's Note: Low melting point means wires need only mild heat and are not damaged.

Exam Note: Solder: low melting point, joins electrical wires.

Question 8. Galvanisation is a method of protecting:
A. Steel and copper from rusting
B. Steel and silver from rusting
C. Steel and iron from rusting
D. Steel and tin from rusting.

Solution.

Answer: C. Galvanisation is the process of applying a protective coating of zinc over the surfaces of steel and iron.

Teacher's Note: Rusting applies only to iron and steel; copper and silver do not rust.

Exam Note: Galvanising protects iron and steel with zinc.

Question 9. The metals which are mixed with iron to make stainless steel are:
A. Copper and nickel
B. Nickel and chromium
C. Copper and chromium
D. Copper and silver

Solution.

Answer: B. Nickel and chromium are mixed with iron to make stainless steel which does not rust.

Teacher's Note: Stainless steel also contains a little carbon; chromium forms the protective layer.

Exam Note: Stainless steel: iron, nickel, chromium.

Question 10. Bronze is an alloy of:
A. Copper and zinc
B. Copper and lead
C. Copper and tin
D. Copper and nickel

Solution.

Answer: C. Bronze is an alloy of copper and tin and is commonly used in industries and for statues and medals.

Teacher's Note: Bronze Cu + Sn; brass Cu + Zn.

Exam Note: Bronze means copper and tin.

Question 11. Which of the following metals are obtained by electrolysis of their chlorides in molten state?
(i) Na (ii) Ca (iii) Fe (iv) Cu
A. (i) and (iv)
B. (iii) and (iv)
C. (i) and (iii)
D. (i) and (ii)

Solution.

Answer: D. Metals at the top of the reactivity series (Na, Ca) are obtained by the electrolysis of their molten chlorides and oxides.

Teacher's Note: Only highly reactive metals need electrolysis; Fe and Cu are reduced by carbon.

Exam Note: Top-of-series metals use electrolysis of molten compounds.

Question 12. Which among the following statements is incorrect for magnesium metal?
A. It burns in oxygen with a dazzling white flame.
B. It reacts with cold water to form magnesium oxide and evolves hydrogen gas.
C. It reacts with hot water to form magnesium hydroxide and evolves hydrogen gas.
D. It reacts with steam to form magnesium hydroxide and evolves hydrogen gas.

Solution.

Answer: B. Magnesium does not react with cold water. It reacts with hot water to give magnesium hydroxide and hydrogen. (Option D is loosely worded, since steam gives magnesium oxide, but B is the clearly incorrect statement.)

Teacher's Note: Magnesium reacts with hot water; with steam it forms oxide and hydrogen.

Exam Note: Mg does not react with cold water.

Question 13. An electrolytic cell consists of:
(i) Positively charged cathode
(ii) Negatively charged anode
(iii) Positively charged anode
(iv) Negatively charged cathode
A. (i) and (ii)
B. (iii) and (iv)
C. (i) and (iii)
D. (ii) and (iv)

Solution.

Answer: B ((iii) and (iv)). In an electrolytic cell the anode is connected to the positive terminal of the battery and is positively charged, while the cathode is connected to the negative terminal and is negatively charged.

Teacher's Note: Remember: anode attracts anions and is positive in electrolysis.

Exam Note: Anode positive, cathode negative.

Question 14. During electrolytic refining of zinc, it gets:
A. Deposited on cathode
B. Deposited on anode
C. Deposited on cathode as well as anode
D. Remains in the solution.

Solution.

Answer: A. Impure metal is kept as anode, and a thin strip of pure metal is kept as cathode. The pure metal content present in anode is dissolved into the electrolyte and the same amount of zinc gets deposited on the cathode.

Teacher's Note: Pure metal always collects on the cathode; the anode shrinks.

Exam Note: Pure metal deposits at the cathode.

Question 15. An element A is soft and can be cut with a knife. This is very reactive to air and cannot be kept open in air. It reacts vigorously with water. Identify the element from the following:
A. Mg
B. Na
C. P
D. Ca

Solution.

Answer: B. Na is one of the metals that can be cut with a knife. It is highly reactive to air and water.

Teacher's Note: Sodium is stored in kerosene and is soft enough to cut; phosphorus is a non-metal.

Exam Note: Soft, knife-cuttable, stored under oil: sodium.

Question 16. Which one of the following properties are not generally exhibited by ionic compounds?
A. Solubility in water
B. Electrical conductivity in solid state
C. High melting and boiling points
D. Electrical conductivity in molten state.

Solution.

Answer: B. Ionic compounds do not conduct electricity in the solid state because the ions are not free to move.

Teacher's Note: Conduction needs free ions: molten or dissolved, not solid.

Exam Note: Solid ionic compounds do not conduct.

Question 17. Which of the following metals exist in their native state in nature?
(i) Cu (ii) Au (iii) Zn (iv) Ag
A. (i) and (ii)
B. (ii) and (iii)
C. (ii) and (iv)
D. (iii) and (iv)

Solution.

Answer: C. Gold (Au) and Silver (Ag) are less reactive and exist in their native (free) state in nature. Copper is also sometimes found free, but among the options Au and Ag is the standard answer.

Teacher's Note: Very unreactive metals such as gold, silver and platinum occur free.

Exam Note: Au and Ag occur in free state.

Question 18. Metals are refined by using different methods. Which of the following metals are refined by electrolytic refining?
(i) Au (ii) Cu (iii) Na (iv) K
A. (i) and (ii)
B. (i) and (iii)
C. (ii) and (iii)
D. (iii) and (iv)

Solution.

Answer: A ((i) and (ii)). Gold and copper are refined electrolytically. Sodium and potassium are obtained by electrolysis of molten compounds, not refined this way.

Teacher's Note: Do not confuse extraction by electrolysis (Na, K) with electrolytic refining (Cu, Au).

Exam Note: Refining uses Cu, Ag, Au, Zn.

Question 19. Silver articles become black on prolonged exposure to air. This is due to the formation of:
A. Ag3N
B. Ag2O
C. Ag2S
D. Ag2S and Ag3N

Solution.

Answer: C. Silver when exposed to sulphur compounds in air forms a black coat of silver sulphide.

Teacher's Note: Sulphur compounds in air tarnish silver; the black coat is Ag2S.

Exam Note: Black coating on silver: silver sulphide.

Question 20. Galvanisation is a method of protecting iron from rusting by coating with a thin layer of:
A. Gallium
B. Aluminium
C. Zinc
D. Silver

Solution.

Answer: C. Zinc is more reactive than iron. Hence zinc acts as a protective metal to prevent direct contact of iron with moisture, air etc.

Teacher's Note: Even if the zinc layer is scratched, zinc corrodes first and still protects iron.

Exam Note: Galvanisation uses zinc.

Comprehensive Exercises (T/F)

Question 1. Write true or false for the following statements:
Non-metals react with acids to give a salt and hydrogen gas.

Solution.

Answer: False. Metals generally react with acids to give a salt and hydrogen gas. Non-metals do not react with dilute acids.

Teacher's Note: Reaction with acids to release hydrogen is a typical metallic property.

Exam Note: False: this is a property of metals.

Question 2. Write true or false for the following statements:
At ordinary temperature, the surfaces of metals such as magnesium, aluminium, zinc, lead, etc., are covered with a thin layer of oxide which protects the metal from further oxidation.

Solution.

Answer: True. These metals form a thin protective oxide layer on exposure to air.

Teacher's Note: The oxide layer on aluminium is the reason it resists corrosion.

Exam Note: True: protective oxide layer.

Question 3. Write true or false for the following statements:
Iron does not burn on heating but iron filings burn vigorously when sprinkled in the flame of the burner.

Solution.

Answer: True. Powdered iron has a large surface area, so iron filings burn vigorously while a bulk piece does not.

Teacher's Note: Surface area decides rate: powder burns, lump does not.

Exam Note: True: filings have larger surface area.

Question 4. Write true or false for the following statements:
Copper does not burn in air, but the hot metal is coated with a black coloured layer of copper (II) oxide.

Solution.

Answer: True. Heated copper reacts with oxygen to form black copper(II) oxide: 2Cu + O2 → 2CuO.

Teacher's Note: Black CuO coating is the common observation in the copper heating activity.

Exam Note: True: black CuO forms.

Question 5. Write true or false for the following statements:
Silver and gold react with oxygen at high temperatures.

Solution.

Answer: False. Silver and gold do not react with oxygen at high temperatures.

Teacher's Note: Gold and silver are very unreactive, which is why they stay shiny.

Exam Note: False: they do not react.

Question 6. Write true or false for the following statements:
Hydrogen gas is evolved when a metal reacts with nitric acid.

Solution.

Answer: False. The hydrogen gas obtained from the reaction of metal and nitric acid is oxidized to water by nitric acid, which is a strong oxidising agent. (Only Mg and Mn release H2 with very dilute HNO3.)

Teacher's Note: Nitric acid oxidises hydrogen to water, giving nitrogen oxides instead.

Exam Note: False: nitric acid oxidises hydrogen to water.

Question 7. Write true or false for the following statements:
Copper reacts vigorously with dilute HCl.

Solution.

Answer: False. Copper is below hydrogen in the reactivity series. Therefore copper cannot displace H from HCl.

Teacher's Note: Only metals above hydrogen displace it from dilute acids.

Exam Note: False: copper is below hydrogen.

Question 8. Write true or false for the following statements:
A solution of an ionic compound in water contains ions, which move to the opposite electrodes when electricity is passed through the solution.

Solution.

Answer: True. Cations move to the cathode and anions to the anode in the solution.

Teacher's Note: Ions are attracted to the electrode of opposite charge.

Exam Note: True: ions move to opposite electrodes.

Question 9. Write true or false for the following statements:
The elements or compounds, which occur naturally in the earth's crust, are known as minerals.

Solution.

Answer: True. Minerals are naturally occurring elements or compounds in the Earth's crust.

Teacher's Note: Compare with ore: an ore is a mineral that is economical to extract.

Exam Note: True: that is the definition of mineral.

Question 10. Write true or false for the following statements:
Those minerals which contain a very high percentage of a particular metal and from which metal can be profitably extracted are called ores.

Solution.

Answer: True. Such minerals are called ores.

Teacher's Note: Profitable extraction is the key condition that makes a mineral an ore.

Exam Note: True: this is the definition of an ore.

Step-by-Step Evergreen Solutions for Class 10 Math

Chapter-wise Evergreen Solutions: Evergreen Solutions Class 10 Science Chapter 3 Metals And Non Metals

Access the complete chapter-wise PDF for Evergreen Solutions Class 10 Science Chapter 3 Metals And Non Metals. These structured Evergreen Solutions solutions for Class 10 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Mastering Core Concepts with Evergreen Solutions

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Additional Study Materials for 2026

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 10 Science?

They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 10 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 10 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 10 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 10 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.