All In One Solutions Class 10 Science Chapter 3 Metals And Non Metals

Solutions for Class 10 Science: Chapter 03 Metals And Non Metals

Review structured textbook solutions for Class 10 Science Chapter 03 Metals And Non Metals prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice Class 10 Science Solutions: Chapter 03 Metals And Non Metals

View or download the dedicated Chapter 03 Metals And Non Metals solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Science.

Check Point 01

Question 1. What are metalloids?

Solution.

Metalloids refer to those class of material which possess properties of both the metals and non-metals. Examples of such materials are silicon, germanium etc. They possess fair conductivity of electricity or heat and are brittle in nature etc.

Teacher's Note: Metalloids lie between metals and non-metals, showing properties of both; silicon and germanium are semiconductors.

Exam Note: Metalloids: intermediate properties; silicon, germanium.

Question 2. Which metal has highest melting point?

Solution.

Among all the metals in their pure form, Tungsten has the highest melting point which is around 3422° C and this is the reason why it is used in the making of incandescent bulb filaments.

Teacher's Note: Tungsten has the highest melting point among metals, so it withstands the heat of a glowing bulb filament.

Exam Note: Tungsten: highest melting point, bulb filaments.

Question 3. Some metals melt on keeping them on palm. Why? Also give an example.

Solution.

Some metals melt on keeping them on palm because such metals have very low melting point compared to other metals. Examples of such metals are Gallium and caesium.

Teacher's Note: Gallium and caesium have very low melting points, so they melt at body temperature.

Exam Note: Gallium and caesium melt on the palm.

Question 4. To avoid accidental fires, some metals are kept immersed in kerosene oil. Why?

Solution.

Reactive metals like sodium and potassium react very violently with oxygen or water and hence the reaction can even catch fire. To prevent such an accidental reaction or fires, metals are kept immersed in kerosene oil.

Teacher's Note: Sodium and potassium react violently with air and water, so they are stored under kerosene to avoid fire.

Exam Note: Sodium, potassium stored in kerosene: very reactive.

Question 5. An element X is soft and can be cut with a knife easily. This is very reactive with air and cannot be kept open with air. It reacts vigorously with water. Name the element X.

Solution.

Based on the description of the metal that it is reactive with water or air and it can be cut with a knife, the metal X is surely sodium as sodium possess all these properties.

Teacher's Note: A soft metal that is cut with a knife and reacts vigorously with air and water is sodium.

Exam Note: Soft, very reactive with air and water: sodium.

Question 6. Write a chemical reaction for metals with dil. HCl.

Solution.

Less reactive metals do not displace hydrogen from the acids. Reactive metals like sodium, magnesium etc displace hydrogen from acids to form respective chlorides.

Reaction:

2Na + 2HCl → 2NaCl + H₂

Mg + 2HCl → MgCl₂ + H₂

Teacher's Note: Metals above hydrogen in the reactivity series displace hydrogen from dilute acids, forming a salt and hydrogen gas.

Exam Note: Metal plus dilute acid gives salt plus hydrogen.

Question 7. Name the reagent which is able to dissolve gold and platinum.

Solution.

Gold and Platinum belong to class of noble metals in the sense that gold and platinum do not react with almost any chemical reagent.

Aqua Regia is the chemical mixture which consists of 3 parts of concentrated

hydrochloric acid and 1 part of concentrated nitric acid and this mixture can dissolve gold and platinum. The reaction is as follows:

Au + HNO₃ + 4 HCl → HAuCl₄ + NO + 2 H₂O

Teacher's Note: Aqua regia, three parts concentrated hydrochloric acid to one part concentrated nitric acid, dissolves unreactive gold and platinum.

Exam Note: Aqua regia: 3 HCl : 1 HNO₃.

Check Point 02

Question 1. Do non-metals possess lustre? Give two exceptions of this property of non- metal.

Solution.

Lustre means the shine which is possessed generally by all the metals. Non- metals generally do not possess any kind of lustre.

Example of non-metals which possess lustre are carbon as diamond and iodine.

Teacher's Note: Non-metals are generally dull, but iodine and diamond shine; graphite also has some lustre.

Exam Note: Exceptions: iodine and diamond are lustrous.

Question 2. Give an example of a non-metal which is

a. hardest known substance.

b. a good conductor of heat and electricity.

Solution.

(a) Diamond is the hardest known naturally occurring non-metalic substance.

(b) Graphite, an allotrope of carbon is a non-metal which is a good conductor of heat and electricity.

Teacher's Note: Diamond, an allotrope of carbon, is the hardest natural substance, while graphite conducts heat and electricity.

Exam Note: Diamond hardest; graphite conducts.

Question 3. Non-metals do not evolve hydrogen gas when react with water, steam or dilute acids. Why?

Solution.

Non-metals are electronegative; they do not lose electrons to form positive ions, so they cannot give electrons to the hydrogen ions of water, steam or dilute acids.

Hence non-metals do not evolve hydrogen gas when they react with water, steam or dilute acids.

Teacher's Note: Non-metals do not lose electrons to form positive ions, so they cannot supply electrons to displace hydrogen.

Exam Note: Non-metals cannot lose electrons to displace hydrogen.

Question 4. Write a displacement reaction for non-metal.

Solution.

The best example of a displacement reaction for a non-metal is the reaction in which the more reactive halogen replaces the less reactive ones. The reaction is as follows:

Cl₂ + 2NaBr → 2NaCl + Br₂

Teacher's Note: A more reactive halogen displaces a less reactive halogen from its salt solution; chlorine displaces bromine from sodium bromide.

Exam Note: Chlorine displaces bromine from sodium bromide.

Question 5. Write the product by giving balanced chemical equation

(i) When sulphur reacts with conc. nitric acid.

(ii) When phosphorus reacts with conc. sulphuric acid.

(iii) When phosphorus reacts with conc. nitric acid.

Solution.

(i) When Sulphur reacts with concentrated nitric acid, sulphuric acid, nitrogen dioxide and water are formed as the products. The reaction is as follows:

S + 6HNO₃→ H₂SO₄ + 6NO₂ + 2H₂O

(ii) When white phosphorous reacts with concentrated sulphuric acid the products formed are phosphoric acid, sulphur dioxide and water. The reaction is as follows:

P₄ + 10H₂SO₄→ 4H₃PO₄ + 10SO₂ + 4H₂O

(iii) When phosphorous reacts with concentrated nitric acid formation of phosphoric acid, nitrogen dioxide and water takes place. The reaction is as follows:

P + 5HNO₃→ H₃PO₄ + 5NO₂ + H₂O

Teacher's Note: Non-metals such as sulphur and phosphorus are oxidised by hot concentrated acids; always balance the equation.

Exam Note: Write products, then balance atoms on both sides.

Check Point 03

Question 1. A non-metal gains electrons to form anions. What do you mean by this statement?

Solution.

Non-metals typically have smaller sizes as compared to the metals because of which to attain a stable noble gas configuration, it is difficult for a non-metal to lose electrons and on the other hand they can easily accept electrons with less energy involved to fill the octet.

Hence non-metals gain electrons to form anions.

Teacher's Note: Non-metals have small atoms with high nuclear charge, so they gain electrons easily to complete their octet and form anions.

Exam Note: Non-metals gain electrons, forming negative ions.

Question 2. What do you mean by ionic bond?

Solution.

Ionic Bond is a type of chemical bond which exists between two oppositely charged species and the bond is mainly formed between electron donor element and electron acceptor element.

Example- NaCl, KBr etc.

In example of NaCl, Sodium atom donate one electron to chlorine atom to form ionic bond.

Teacher's Note: An ionic bond forms by transfer of electrons from a metal to a non-metal, giving oppositely charged ions that attract.

Exam Note: Ionic bond: transfer of electrons, attraction of ions.

Question 3. Water helps in separation of oppositely charged ions from their ionic compound. Give reason.

Solution.

Water helps in separation of oppositely charged ions from their ionic state because when an ionic compound is dissolved in water the ions get attracted by the water

molecules which leads to the dissociation of ionic compound.

Teacher's Note: Water molecules surround and attract the ions, weakening the electrostatic force holding the ionic crystal together.

Exam Note: Water weakens electrostatic attraction between ions.

Question 4. Ionic compounds are crystalline solids and brittle. Why?

Solution.

In Ionic compounds, ions are held tightly together by strong electrostatic forces of attraction making them quite rigid and hence even when a small force is applied to the compound, the force causes the ions to get displaced from the lattice and they suffer repulsion from similar charged ions in the lattice causing the ionic solids to shatter.

Teacher's Note: Strong electrostatic forces make ionic solids rigid, but a blow shifts ion layers, like charges repel and the crystal breaks.

Exam Note: Like charges repel on shifting, so crystal breaks.

Question 5. Why ions move freely and conduct electricity in the molten form?

Solution.

In Ionic compounds, ions are held tightly together by strong electrostatic forces of attraction making them quite rigid. So these ions do not conduct electricity in solid state due to the immobility of the ions. But in molten state the ions get some free space to move as the electrostatic force of attraction weakens and hence allow the conduction of electricity.

Teacher's Note: Ions are fixed in solid ionic compounds; in the molten state they move freely and carry current.

Exam Note: Molten ionic compounds conduct because ions are mobile.

Check Point 04

Question 1. What is calcination?

Solution.

Calcination is one of the processes of metallurgy in which the ore is heated at high temperatures in the absence or limited supply of air to get rid of the volatile substances and to convert the ore to its oxide.

Carbonates, Bicarbonates and hydroxide ores generally undergo calcination.

Reaction:

CaCO₃ → CaO + CO₂ (limestone → quick lime + carbon dioxide)

Teacher's Note: Calcination heats an ore strongly in little or no air, driving off volatile matter and forming the metal oxide.

Exam Note: Calcination: heating carbonate ore without air gives oxide.

Question 2. In electrolytic reduction of NaCl, metal is deposited at the ………. and chlorine is liberated at the ……….

Solution.

In electrolytic reduction of NaCl, metal is deposited at the cathode and chlorine is liberated at the anode.

Sodium being electropositive in nature gets attracted to the negative electrode cathode and chlorine being electronegative in nature gets attracted to positive electrode anode.

Teacher's Note: In electrolysis of molten sodium chloride, sodium ions gain electrons at the cathode; chloride ions lose them at the anode.

Exam Note: Sodium at cathode, chlorine at anode.

Question 3. Name any two elements which can be refined electrolytically.

Solution.

The two metals which can be refined electrolytically are copper and zinc.

Teacher's Note: Impure metal acts as the anode and pure metal collects at the cathode in electrolytic refining of copper and zinc.

Exam Note: Copper and zinc are refined electrolytically.

Question 4. What is electroplating?

Solution.

The word electroplating can be broken into two words electro which means using electricity and plating means to coat.

Hence electroplating is a process of coating a metal object with another metal like zinc, chromium etc by the process of electrolytic deposition in order to protect the base metal.

Teacher's Note: Electroplating coats a metal article with a thin layer of another metal using electric current, to protect or decorate it.

Exam Note: Electroplating: coating metal with metal using electricity.

Question 5. Why should we paint on a metal surface?

Solution.

Metal surface when exposed to environment, there are chances that the oxygen or moisture present in the environment to react with the metal making the metal corroded.

In order to protect the metal from environmental factors the metal is painted.

Teacher's Note: Paint covers the metal surface, keeping out air and moisture, and so prevents corrosion.

Exam Note: Paint stops air and moisture reaching the metal.

Question 6. What is galvanization? Name the element used in the process.

Solution.

Galvanization is a process of coating a metal especially iron object with zinc metal.

Zinc is the metal which is used for coating and iron objects are generally galvanized to protect them from rust.

Teacher's Note: Galvanisation coats iron or steel with a layer of zinc, which protects it from rusting.

Exam Note: Galvanisation: iron coated with zinc.

Question 7. Name the elements which are resistant to corrosion.

Solution.

Noble metals like gold and platinum which are unreactive under normal conditions are the elements which are resistant to corrosion.

Teacher's Note: Gold and platinum are so unreactive that air and moisture do not corrode them.

Exam Note: Gold and platinum resist corrosion.

Question 8. What is the special quality of iron pillar near Qutub Minar?

Solution.

The special quality of the iron pillar at Qutub Minar is that the pillar is not rusted or rather the pillar is rust resistant which depicts the high-quality craftsmanship of Indian craftsman.

Teacher's Note: The ancient iron pillar near Qutub Minar has resisted rusting for centuries, showing the skill of early Indian metallurgists.

Exam Note: Iron pillar: rust-resistant for centuries.

Chapter Exercise

Question 1. Which of the following elements is a metal?

\( {}^{7}_{3}\mathrm{X},\ {}^{3}_{1}\mathrm{Y},\ {}^{19}_{9}\mathrm{Z} \)

Solution.

Atomic Number of X = 3

Atomic Number of Y = 1

Atomic Number of Z = 9

Among the given elements, element X is a metal as it can easily lose one electron to achieve the stable noble gas configuration of helium. Element X is Lithium.

Element Z will be a non-metal as it can easily accept an electron to achieve the stable noble gas configuration of neon.

Teacher's Note: Elements with one electron to lose, like lithium, are metals; elements needing one to gain, like fluorine, are non-metals.

Exam Note: Use atomic number to find electron arrangement.

Question 2. Name one metal and one non-metal which are obtained on a large scale from sea water.

Solution.

Sea water contains many dissolved salts but the salt which is abundant in seawater is sodium chloride.

So Sodium and chlorine are obtained on a large scale from sea water.

Other salts in sea water are MgCl₂, CaCl₂ etc.

Teacher's Note: Sea water contains much sodium chloride, from which sodium metal and chlorine gas are obtained by electrolysis.

Exam Note: Sodium and chlorine come from sea salt.

Question 3. Name the process used for the concentration of the sulphide ore.

Solution.

Concentration is a process of removal of impurities from the ores. Sulphide ores are normally concentrated by the process of Froth Flotation as these ores possess good wetting and froth forming properties when mixed with frothing agents.

Teacher's Note: Sulphide ores are concentrated by froth flotation, in which ore particles cling to froth while impurities sink.

Exam Note: Sulphide ore: froth flotation.

Question 4. For the reduction of metal oxide to metal, suggest a reducing agent cheaper than aluminium.

Solution.

Element which is cheaper than aluminium and can be used for the reduction purposes is carbon. Carbon reacts with metallic oxides to form carbon dioxide and metal is obtained.

Teacher's Note: Carbon is a cheap reducing agent that reduces many metal oxides to metals, forming carbon monoxide or carbon dioxide.

Exam Note: Cheaper reducing agent than aluminium: carbon.

Question 5. What is the purpose of adding carbon (C) to molten iron?

Solution.

Carbon is added to the molten iron to improve the properties of iron and it basically enhances the strength and hardness of iron.

Teacher's Note: Adding a little carbon to molten iron makes steel, which is harder and stronger than pure iron.

Exam Note: Carbon makes iron harder and stronger (steel).

Question 6. Aluminium occurs in combined state the, whereas gold is found in free-state in nature. Why?

Solution.

Noble metals like gold and platinum which are unreactive under normal conditions and hence are found in free-state.

On the other hand, aluminium is reactive in nature and hence react with environmental factors like oxygen or moisture to form corresponding products.

Teacher's Note: Reactive metals like aluminium occur as compounds, while unreactive gold stays uncombined in nature.

Exam Note: Reactivity decides free or combined occurrence.

Question 7. What is the difference between sodium atom and sodium ion?

Solution.

Sodium atom contains total 11 electrons whereas sodium ion is formed by the loss of one electron and hence sodium ion contain total 10 electrons which is similar to the noble gas configuration of neon.

Teacher's Note: A sodium atom has eleven electrons; its ion has ten after losing one, matching neon's stable configuration.

Exam Note: Na has 11 electrons; Na⁺ has 10.

Question 8. Why is it that non-metals do not displace hydrogen from dilute acids?

Solution.

Non-metals are electronegative; they do not lose electrons to form positive ions, so they cannot give electrons to the hydrogen ions of water, steam or dilute acids and do not evolve hydrogen gas.

To displace hydrogen, an element must be able to lose electrons, as metals above hydrogen in the reactivity series do.

Teacher's Note: Non-metals cannot give electrons to hydrogen ions, so they do not liberate hydrogen from water or dilute acids.

Exam Note: Non-metals do not lose electrons, so no hydrogen.

Question 9. Answer the following:

(i) Name a metal which does not stick to glass.

(ii) What is the nature of zinc oxide?

(iii) What is deposited at the cathode, a pure or impure metal?

(iv) Will carbon monoxide (CO) change the colour of blue litmus?

Solution.

(i) Mercury is a metal which does not stick to glass as mercury lacks adhesive forces.

(ii) Zinc Oxide is amphoteric in nature which means it can act as an acid as well as a base in a chemical reaction depending upon the reaction conditions.

(iii) A pure metal will be deposited at cathode because cathode is a negative electrode and hence it attracts the positive metal ions from the electrolyte.

(iv) No, carbon monoxide will not change the colour of blue litmus because it is a neutral oxide.

Teacher's Note: Mercury does not wet glass, zinc oxide is amphoteric, pure metal collects at the cathode, and carbon monoxide is neutral.

Exam Note: CO is a neutral oxide: no litmus change.

Question 10. Zn is more electropositive than Fe. Therefore, it should get corroded faster than Fe. But it does not happen. Instead, it is used to galvanize iron. Explain why does it happen so?

Solution.

Though zinc is more reactive than iron but when a layer of zinc is exposed to the atmosphere zinc reacts with the oxygen in the atmosphere to form zinc oxide. This zinc oxide forms a protective layer on the surface of zinc which prevents the further attack. Hence zinc is used to galvanize iron.

Teacher's Note: Zinc is more reactive than iron, but its oxide layer protects it, and zinc corrodes in preference to iron.

Exam Note: Zinc's protective oxide layer shields iron.

Question 11. Write the equations for the reactions of

(i) Iron with steam

(ii) Calcium with water

(iii) Potassium with water

Solution.

(i) The reaction is as follows:

3Fe + 4H₂O → Fe₃O₄ + 4H₂

(ii) The reaction is as follows:

Ca + 2H₂O → Ca(OH)₂ + H₂

(iii) The reaction is as follows:

2K + 2H₂O → 2KOH + H₂

Teacher's Note: Iron reacts with steam, and calcium and potassium react with water, liberating hydrogen; balance each equation.

Exam Note: Metal plus water or steam: oxide or hydroxide plus hydrogen.

Question 12. Why Al metal cannot be obtained by the reduction of Al₂O₃ with coke? Explain.

Solution.

Aluminium has far greater affinity for oxygen as compared to carbon because of which carbon cannot separate oxygen from aluminium oxide. Hence Al metal cannot be obtained by the reduction of Al₂O₃ with coke.

Teacher's Note: Aluminium holds oxygen more strongly than carbon does, so coke cannot reduce aluminium oxide.

Exam Note: Al has greater affinity for oxygen than carbon.

Question 13. A solution of CuSO₄ was kept in an iron pot. After few days, the iron pot was found to have a number of holes in it. Explain the reason in terms of

reactivity. Write the equation of the reaction involved.

Solution.

In terms of reactivity o iron and copper, iron is more reactive than copper because of which iron reacts with the copper sulphate solution to form ferrous sulphate leaving holes in the iron pot. The reaction is as follows:

Fe + CuSO₄→ FeSO₄ + Cu

Teacher's Note: Iron is more reactive than copper and displaces it from copper sulphate solution, so the iron pot corrodes.

Exam Note: More reactive iron displaces copper; pot gets holes.

Question 14. List three properties of sodium in which it differs from the general physical properties of most of the metals.

Solution.

The three properties of sodium are as follows:

1. Sodium is very soft in nature and it can be easily cut with the help of a knife.

2. It is non-sonorous metal which means it does not make sound on being hit by hard object.

3. It has low melting and boiling points.

Teacher's Note: Unlike most metals, sodium is soft, easily cut with a knife, and has low melting and boiling points.

Exam Note: Sodium: soft, low melting point, low boiling point.

Question 15. A. An ore, on heating in air, give Sulphur dioxide gas. Name the method in each metallurgical step that will be required to extract this metal from its ore.

Solution.

Since the ore on heating in air gives Sulphur dioxide which means that the ore is a sulphide ore. The various methods involved in the extraction of metals from sulphide ores are as follows:

1. The ore is concentrated by the process of froth flotation to remove the impurities.

2. The concentrated ore is then roasted, that is heated in presence of air to convert the ore to

corresponding metal oxide.

3. The metal oxide is then made to react with carbon to reduce the metal oxide to corresponding metal.

4. The metal is then purified by electrolytic refining.

Teacher's Note: Sulphide ores are concentrated, roasted in air to oxide, reduced to metal and then refined electrolytically.

Exam Note: Concentration, roasting, reduction, refining.

Question 15. B. State which of the following reactions will take place or which will not, giving a suitable reason for each?

Zn(s) + CuSO₄(aq) → ZnSO₄(aq) + Cu(s)

Fe(s) + ZnSO₄(aq) → FeSO₄(aq) + Zn(s)

Solution.

In the first reaction zinc is more reactive than copper and hence the above reaction is possible as zinc can replace copper from copper sulphate to form zinc sulphate.

In the second reaction, it is known that iron is less reactive than zinc and hence iron cannot replace zinc from zinc sulphate.

Teacher's Note: A more reactive metal displaces a less reactive metal from its salt solution, so only the first reaction occurs.

Exam Note: Zinc displaces copper; iron cannot displace zinc.

Question 16. A non-metal A which is the largest constituent of air, when heated with H₂ in 1:3 ratio in the presence of catalyst (Fe) gives a gas B. On heating with O₂, it gives an oxide C. If this oxide is passed into water in the presence of air, it gives an acid D which acts as a strong oxidizing agent.

(i) Identify A, B, C and D.

(ii) To which group of the periodic table, does this non-metal belongs?

Solution.

The non-metal which is the largest constituent of air is Nitrogen.

When nitrogen is heated with hydrogen in the ratio of 1:3 in presence of iron as a catalyst we get ammonia as the product. This process of ammonia production is called as Haber’s process. The reaction is as follows:

N₂ + 3H₂→ 2NH₃

When nitrogen is heated with oxygen, it gives nitrogen dioxide. The reaction is as follows:

N₂ + 2O₂→ 2NO₂

When nitrogen dioxide is dissolved in water, it gives nitric acid which is a strong oxidizing agent. The reaction is as follows:

3NO₂ + H₂O → 2HNO₃ + NO

(i) Therefore from above reactions we can easily state that,

A is Nitrogen B is Ammonia

C is Nitrogen Dioxide

D is Nitric Acid

(ii) The non-metal that is nitrogen belongs to the group 15 of the periodic table.

Teacher's Note: Nitrogen, the main gas in air, gives ammonia with hydrogen and, via its oxide, nitric acid; group 15.

Exam Note: A=N₂, B=NH₃, C=NO₂, D=HNO₃.

Question 17. Noble gases, which have a completely filled valence shell, show little chemical activity. At ordinary temperature they do not show chemical reactivity. However, a large number of compounds of these gases particularly those of xenon and krypton have been prepared. Read the above passage and answer the following questions.

(i) Write one use of each Ar and Kr.

(ii) What are the values associated with the use of helium in artificial respiration in deep sea diving?

Solution.

(i) The use of argon is as follows:

Argon is inert in its nature and hence it is used in filament bulbs to provide the inert medium and to avoid the burning of the metal.

The use of Krypton is as follows:

Krypton is also used in fluorescent bulbs, flashbulbs and lasers. Lamps filled with krypton are used as approach lights at airports as the light from these lamps can travel far even in dense fog.

(ii) Helium is generally added to protect the divers from the toxic effects of nitrogen and the percentage of helium is 11.7%.

The values associated are concern for the safety of divers and the use of scientific knowledge for human welfare.

Teacher's Note: Argon and krypton are inert gases used in lamps; helium mixed with oxygen helps deep sea divers breathe safely.

Exam Note: Noble gases are inert; give use of each.

Challengers

Question 1. In each test tubes A, B, C and D, 2 mL of solution of Al₂(SO₄)₃ in water was filled. Clean pieces of zinc were placed in test tube A, clean iron nail was put in test tube B, silver (Ag) was placed in test tube C and a clean copper wire was placed in test tube D.

Which of the following option (s) is/are correct about above experiment?

A. Zinc is more reactive than aluminium

B. Copper is more reactive than aluminium

C. Zinc is more reactive than copper

D. Zinc, iron, silver and copper are less reactive than aluminium.

Solution.

Zinc, iron, copper as well as silver are less reactive as compared to aluminium and hence cannot displace aluminium from its salt as they are placed below aluminium in activity series.

So the correct answer is d.

The activity series of metals is as follows:

MetalSymbolReactivity
PotassiumKMost reactive metal
SodiumNaMore reactive than hydrogen
CalciumCaMore reactive than hydrogen
MagnesiumMgMore reactive than hydrogen
AluminiumAlMore reactive than hydrogen
ZincZnMore reactive than hydrogen
IronFeMore reactive than hydrogen
TinSnMore reactive than hydrogen
LeadPbMore reactive than hydrogen
[Hydrogen][H]Hydrogen
CopperCuLess reactive than hydrogen
MercuryHgLess reactive than hydrogen
SilverAgLess reactive than hydrogen
GoldAuLeast reactive metal

Teacher's Note: A metal displaces another from its salt solution only if it is more reactive; compare each metal with aluminium.

Exam Note: Metals below aluminium cannot displace it.

Question 2. On the basis of the sequence of the given reactions identify the most and least reactive elements:

X+ YA → XA + Y ...(i)

X + YB → XB + Y ...(ii)

Z + XA → ZA + X

A. X and Z

B. Y and Z

C. Z and X

D. Z and Y

Solution.

From the sets of reactions i, ii, iii, it can be observed from i and ii that X is more reactive than Y and hence it displaces Y from its salt.

From reaction iii it can be observed that Z is more reactive than X as it displaces X from its salt.

So the most reactive element is Z and the least reactive is Y.

So correct answer is d [Z and Y].

Teacher's Note: A metal displaces from solution a metal less reactive than itself; use the reactions to rank X, Y and Z.

Exam Note: Rank: the displacing metal is more reactive.

Question 3. A metal M has electronic configuration 2, 8, 3 and occurs in earth's crust and its oxide M₂O₃. It is more reactive than zinc. Which of the following options (s) is/are correct?

A. The metal M is iron

B. The metal M is lead

C. The ore from which metal M is extracted in haematite.

D. The ore from which metal M is extracted is bauxite.

Solution.

The element with atomic number of 13 [2 + 8 + 3 = 13] is Aluminium and it is more reactive than zinc.

The ore of aluminium is called as bauxite and the oxide of aluminium is Al₂O₃.

So the correct answer is d.

Teacher's Note: Electronic configuration 2, 8, 3 means atomic number 13, which is aluminium, extracted from bauxite.

Exam Note: 2, 8, 3 is Al; ore is bauxite.

Question 4. Metal M reacts with oxygen to form metallic oxide MO. This oxide reacts with moisture and carbon dioxide of the atmosphere to form a basic carbonate. The metal 'M' is

A. Cu

B. Fe

C. Zn

D. Cr

Solution.

The metallic oxide of type MO which reacts with moisture and carbon dioxide of atmosphere to form basic carbonate is copper oxide. Copper metal on exposed to atmosphere reacts with oxygen, moisture and carbon dioxide to form a green coloured coating of copper carbonate and copper hydroxide.

So the correct answer is a.

Teacher's Note: Copper exposed to moist air gains a green coating of basic copper carbonate.

Exam Note: Copper turns green: basic copper carbonate.

Question 5. Beakers A, B and C contain zinc sulphate, silver nitrate and iron (II) sulphate solutions respectively. Copper pieces are added to each beaker. Blue colour will appear in case of

A. beaker A

B. beaker B

C. beaker C

D. all the beakers.

Solution.

Among all the available metal solutions, copper is more reactive as compared to silver only. Copper cannot displace zinc or iron from its salt as it is less reactive as compared to both the metals. So blue colour will appear only in the beaker which has Silver nitrate solution in it.

So the correct answer is b.

Teacher's Note: Copper displaces only metals less reactive than itself, so it reacts with silver nitrate, giving a blue solution.

Exam Note: Copper displaces silver; solution turns blue.

Question 6. A student puts one big iron nail each in four test tubes containing solutions of zinc sulphate, aluminium sulphate, copper sulphate and iron sulphate. A reddish brown coating was observed only on the surface of iron nail which was put in the solution of

A. zinc sulphate

B. iron sulphate

C. copper sulphate

D. aluminium sulphate

Solution.

Iron is more reactive than copper and hence it can displace only copper from its salt. Iron is less reactive as compared to aluminium or zinc so they will not be displaced from their salts. Also iron will not react with its own salt. So the reddish brown coating on surface of nail is of copper deposition which will be observed only in case of iron nail dipped in copper sulphate solution.

So the correct answer is c.

Teacher's Note: Iron displaces only less reactive copper from copper sulphate, depositing a reddish brown layer on the nail.

Exam Note: Iron nail in copper sulphate gets reddish brown coating.

Question 7. Which of the following reactions not occur?

A. 2AgNO₃(aq) + Zn(s) → Zn(NO₃)₂(aq)+ 2Ag(s)

B. CuSO₄(aq)+ Zn(s) → ZnSO₄ (aq)+ Cu(s)

C. 2AgNO₃(aq)+Fe(s) → Fe(NO₃)₂(aq) + 2Ag(s)

D. CuSO₄(aq) + 2Ag(s) → Cu(s)+ Ag₂SO₄ (aq)

Solution.

Among all the reactions, the reaction d is only not possible because silver is less reactive as compared to copper and hence it cannot displace copper from its salt. So correct answer is d.

Teacher's Note: A displacement reaction occurs only when the added metal is more reactive than the metal in the salt.

Exam Note: Silver cannot displace copper from its salt.

Question 8. Hydrogen gas is not widely used as a reducing agent because

A. hydrogen decomposes to atomic hydrogen at higher temperature

B. risk of explosion with water

C. hydrogen isomerises to ortho hydrogen at higher temperature.

D. many metals form hydrides at lower temperatures.

Solution.

Many metals react with hydrogen to form respective hydrides, and hence hydrogen is not widely used as reducing agent in metallurgy. So the correct answer is d.

Teacher's Note: Hydrogen is a poor choice as reducing agent in metallurgy because many metals react with it, forming hydrides.

Exam Note: Hydrogen forms hydrides with many metals.

Question 9. Alloys are homogeneous mixtures of a metal with a metal or non-metal. Which among the following alloys contain non-metal as one of its constituents?

A. Brass

B. Bronze

C. Amalgam

D. Steel

Solution.

Among all the available options Steel is the alloy of iron which contains the non-metal carbon in it.

Bronze consists primarily of copper and 12% tin

Brass is an alloy of copper and zinc.

Amalgam is an alloy of mercury.

So the correct answer is d.

Teacher's Note: Alloys can contain non-metals; steel is iron with a small amount of carbon.

Exam Note: Steel contains the non-metal carbon.

Question 10. E is an element that's ore is rich in E₂O₃. E₂O₃ is not affected by water. It forms two chlorides, ECl₂ and ECl₃ The element E is

A. copper

B. zinc

C. aluminium

D. iron

Solution.

The metallic oxide of the form E₂O₃ is Iron [III] Oxide. Iron reacts with chlorine to form two different chlorides, Iron [II] Chloride and Iron [III] Chloride. The ore of Iron that is Fe₂O₃ Haematite does not react with water.

So the correct answer is d.

Teacher's Note: Iron forms the oxide Fe₂O₃ and two chlorides, iron(II) chloride and iron(III) chloride.

Exam Note: Iron shows two valencies: FeCl₂ and FeCl₃.

All In One Solutions for Class 10 Mathematics: All In One Solutions Class 10 Science Chapter 3 Metals And Non Metals

Access Class 10 Mathematics Solutions

Explore reliable mathematical solutions for All In One Solutions Class 10 Science Chapter 3 Metals And Non Metals tailored for Class 10 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Step-by-Step Mathematical Explanations

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Explore More Study Resources for Class 10 Math

In addition to these All In One Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these [current-page:node:field_author] Solutions for Class 10 Science?

They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 10 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 10 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 10 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 10 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.