Official Textbook Solutions: Class 10 Science Chapter 13 Magnetic Effects Of Electric Current
Review structured textbook solutions for Class 10 Science Chapter 13 Magnetic Effects Of Electric Current prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Chapter-wise Solutions for Science: Chapter 13 Magnetic Effects Of Electric Current
Access the complete solution PDF for Class 10 Science below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Magnetic Effects of Electric Current
Periodic Test
Question 1. What is the function of an earth wire in electrical instruments?
Solution. The earth wire is a safety device. It connects the metallic body of an appliance to the earth through a low-resistance path. If the live wire touches the metal body or current leaks, the current flows to the earth through the earth wire instead of through the person touching the appliance, so we do not get an electric shock. The earth wire is usually green in colour.
Teacher's Note: Earth wire gives leakage current an easy path to ground, not through you.
Exam Note: Say 'prevents electric shock'; mention low-resistance path to earth.
Question 2. List any two uses of an electromagnet.
Solution. Uses of an electromagnet:
(i) It is used in cranes to lift and move heavy iron and steel scrap.
(ii) It is used in electric bells, electric motors, generators and loudspeakers.
Teacher's Note: Electromagnet is switchable: strong when current flows, nearly nothing when off.
Exam Note: Any two correct uses earn full marks.
Question 3. Draw a labelled diagram to show how an electromagnet is made.
Solution. An electromagnet is made by winding insulated copper wire around a soft iron core (an iron nail) and connecting the ends of the wire to a battery. When current passes through the coil, the iron core becomes a magnet with a north pole at one end and a south pole at the other.
The electromagnetic field is formed when current passes through the wire.
Teacher's Note: Soft iron core strengthens the coil's field; reverse current to swap poles.
Exam Note: Label coil, iron nail, battery, current I, poles N and S.
Question 4. Describe an activity to demonstrate the direction of the magnetic field generated around a current carrying conductor.
Solution. Different shapes of conductors produce different patterns of magnetic field. For a straight conductor:
• Take a straight thick copper wire and place it between the points X and Y in an electric circuit. The wire XY is kept perpendicular to the plane of the paper.
• Horizontally place a small compass near this copper wire. See the position of its needle.
• Pass the current through the circuit by inserting the key into the plug.
• Observe the change in the position of the compass needle and the direction of deflection.
• Interchange the battery connection in the circuit so that the direction of the current in the copper wire changes.
• Observe the change in the direction of deflection of the needle.
Conclusion: a current-carrying conductor produces a magnetic field around it, and the direction of the field reverses when the direction of the current is reversed.
Teacher's Note: Compass deflects with current and reverses when current reverses: field depends on current direction.
Exam Note: Write steps, observation and conclusion; draw circuit with compass.
Question 5. Name one material used for making permanent magnets. Describe how permanent magnets are made electrically.
Solution. Steel (or alloys such as alnico) is used for making permanent magnets, because it retains its magnetism for a long time.
To make a permanent magnet electrically, a steel bar is placed inside a solenoid (a coil of insulated copper wire) and a direct current is passed through the coil for some time. The magnetic field of the solenoid magnetises the steel bar, which then remains a permanent magnet after the current is switched off.
Teacher's Note: Soft iron loses magnetism quickly; steel retains it, so steel makes permanent magnets.
Exam Note: Do not write soft iron: it is for electromagnets.
Question 6. Describe an activity to draw a magnetic field line outside a bar magnet from one pole to another pole.
Solution. • Take a small compass and a bar magnet.
• Place the magnet on a sheet of white paper fixed on a drawing board, using some adhesive material.
• Mark the boundary of the magnet.
• Place the compass near the north pole of the magnet. The south pole of the needle points towards the north pole of the magnet, and the north pole of the compass is directed away from the north pole of the magnet.
• Mark the positions of the two ends of the needle.
• Now move the needle to a new position such that its south pole occupies the position previously occupied by its north pole.
• In this way, proceed step by step until you reach the south pole of the magnet.
• Join the points marked on the paper by a smooth curve. This curve represents a field line.
• Repeat the procedure for other starting points to get more field lines. These lines represent the magnetic field around the magnet and are known as magnetic field lines.
• The deflection of the compass needle increases as the needle is moved towards the pole, showing that the field is stronger near the poles.
Teacher's Note: Each compass position gives the field direction; joining marked points traces a line.
Exam Note: Include steps and a diagram; field lines go from N to S.
Question 7. (a) What is the function of an earth wire in electrical instruments? Why is it necessary to earth the metallic electric appliances? (b) Explain what is short-circuiting and overloading in an electric supply. (c) What is the usual capacity of the fuse wire in the line to feed: (i) Lights and fans? (ii) Appliances of 2 kW or more power?
Solution. (a) The earth wire provides a low-resistance path for any leakage current to flow to the earth. Metallic appliances are earthed so that if the live wire touches the metal body, the leaked current passes through the earth wire to the earth and the user does not get an electric shock.
(b) Short-circuiting: when the live wire and the neutral wire come in direct contact, the resistance of the circuit becomes very small, so a very large current flows (by Ohm's law, I = V/R) and the wires may heat up and cause a fire.
Overloading: when too many appliances are connected to the same socket at the same time, they draw more current than the circuit is designed to carry, and the wires get overheated.
(c) A fuse wire is a safety device that melts and breaks the circuit in case of overloading or short-circuiting.
(i) The usual capacity of the fuse wire for lights and fans is 5 A.
(ii) The usual capacity of the fuse wire for appliances of 2 kW or more power (geyser, heater, air conditioner) is 15 A.
Teacher's Note: Earth wire protects the user; fuse protects the wiring from excess current.
Exam Note: Fuse ratings 5 A and 15 A are frequently asked.
Question 8. The diagram below shows a coil connected to a centre zero galvanometer G. The galvanometer shows a deflection to the right when the N-pole of a powerful magnet is moved to the right as shown. (i) Explain why the deflection occurs in the galvanometer. (ii) Does the direction of current in the coil appear clockwise or anticlockwise when viewed from end A? (iii) State the observation in G when the coil is moved away from N. (iv) State the observation in G when both coil and the magnet are moved to the right at the same speed.
Solution. (i) As the magnet moves towards the coil, the magnetic flux linked with the coil changes. This induces an emf and hence an induced current in the coil (electromagnetic induction), so the galvanometer deflects.
(ii) The current appears anticlockwise when viewed from end A, because end A acts as a north pole (the coil opposes the approach of the N-pole of the magnet) and end B as a south pole.
(iii) When the coil is moved away from N, the flux linked decreases, the induced current reverses (A becomes a south pole), so the galvanometer shows a deflection to the left.
(iv) There is no deflection in the galvanometer, because there is no relative motion between the coil and the magnet, so the magnetic flux linked with the coil does not change.
Teacher's Note: Induced current needs changing flux; Lenz's law fixes its direction to oppose the change.
Exam Note: Mention change in flux and relative motion in each part.
Question 9. The figure shows a long solenoid, a cylindrical coil of a number of turns of insulated copper wire, connected to a battery through an ammeter A and a rheostat Rh. (i) Which end of the solenoid is an N-pole and which end is an S-pole? (ii) Draw the magnetic field lines inside the solenoid and indicate their directions. Are magnetic field lines closed? (iii) How can you increase the strength of the magnetic field inside the solenoid? Give two methods.
Solution. (i) End P is the south pole and end Q is the north pole. Using the right-hand thumb rule (curl the fingers of the right hand in the direction of the current in the turns; the thumb points towards the north pole), the thumb points towards Q, so Q is the north pole.
(ii) The magnetic field lines inside the solenoid are parallel straight lines directed from the south pole to the north pole (from P to Q), and outside the solenoid they go from the north pole to the south pole. Yes, magnetic field lines are closed curves, as shown in the figure below.
(iii) The strength of the magnetic field inside the solenoid (B = μ0nI) can be increased by:
(a) increasing the number of turns per unit length of the solenoid;
(b) increasing the amount of current passing through it. (Placing a soft iron core inside the solenoid also increases the field.)
Teacher's Note: Inside a solenoid the field is uniform; outside it spreads like a bar magnet's.
Exam Note: Draw closed lines, arrows P to Q inside; name two methods.
Question 10. (a) What is meant by a magnetic field? (b) How is the direction of magnetic field at a point determined? (c) Describe an activity to demonstrate the direction of the magnetic field generated around a current carrying conductor. (d) What is the direction of magnetic field at the centre of a current carrying circular loop?
Solution. (a) A magnetic field is the region around a magnet (or a current-carrying conductor) in which its magnetic force can be detected; a magnetic material placed in it is attracted or repelled.
(b) The direction of the magnetic field at a point is the direction in which the north pole of a compass needle placed at that point points (the direction of force on a free north pole).
(c) Take a straight thick copper wire and place it between the points X and Y in an electric circuit; the wire XY is kept perpendicular to the plane of the paper. Horizontally place a small compass near this wire and note the position of its needle. Pass the current through the circuit by inserting the key into the plug. Observe the change in the position of the compass needle and the direction of deflection. Interchange the battery connection so that the direction of the current in the wire changes, and observe the change in the direction of deflection of the needle. The deflection reverses, showing that the direction of the field depends on the direction of the current.
(d) At the centre of a current carrying circular loop the magnetic field lines are straight lines perpendicular to the plane of the loop. The direction depends on the direction of the current: if the current is clockwise (seen from one side) the field is directed into the plane of the loop along its axis, and if the current is anticlockwise the field is directed out of the plane (right-hand thumb rule).
Teacher's Note: Field direction follows current direction: clockwise into the page, anticlockwise out of it.
Exam Note: Part (d): straight lines perpendicular to loop plane at centre.
Comprehensive Exercises (MCQ)
Question 1. A current carrying wire produces:
A. an electric field
B. a magnetic field
C. both electric and magnetic fields
D. neither electric nor magnetic field
Solution. Correct option: B. Whenever current passes through a conductor it produces a magnetic field around it. For a straight wire the field lines are concentric circles, with direction given by the right-hand thumb rule.
Teacher's Note: Moving charges create magnetic field; the wire stays electrically neutral.
Exam Note: Oersted's experiment: current produces magnetic field.
Question 2. By increasing the number of turns 3 times in a toroidal solenoid, the magnetic field:
A. will become three times
B. will remain unchanged
C. will reduce to one-third
D. none of these
Solution. Correct option: A. The magnetic field of a toroidal solenoid is directly proportional to the number of turns (B ∝ N), so tripling the number of turns makes the field three times.
Teacher's Note: Field is proportional to turns when current and radius are unchanged.
Exam Note: Use B proportional to N for direct-ratio answers.
Question 3. The induced potential difference produced, in a coil when a magnet is inserted in it doesn't depend upon:
A. number of turns of the coil
B. the resistance of the coil
C. the magnetic moment of the magnet
D. the speed of approach of the magnet
Solution. Correct option: B. The induced potential difference (emf) depends on the number of turns, the strength of the magnet and the rate of change of magnetic flux (speed of approach). The resistance of the coil affects only the induced current, not the induced emf.
Teacher's Note: Emf depends on flux change; resistance only decides how much current flows.
Exam Note: Distinguish induced emf from induced current.
Question 4. The laws of electromagnetism tell us that energy can be transferred from one object to another:
A. even if there is no material medium
B. instantaneously
C. only if they are connected by a cable
D. only in pulses but not continuously
Solution. Correct option: A. Energy is transferred in the form of electromagnetic waves, which do not need any material medium to travel, so energy can be transferred even through vacuum.
Teacher's Note: Electromagnetic waves, such as sunlight, travel through empty space.
Exam Note: Link answer to electromagnetic waves needing no medium.
Question 5. A soft iron bar is introduced inside a current carrying solenoid. The magnetic field inside the solenoid:
A. no change
B. will decrease
C. will increase
D. uncertain
Solution. Correct option: C. Soft iron is easily magnetised. When placed inside the solenoid it becomes a magnet itself, and its field adds to that of the solenoid, so the magnetic field inside increases (several hundred times).
Teacher's Note: Soft iron core multiplies the field of the coil: B becomes k times larger.
Exam Note: Soft iron core strengthens an electromagnet.
Question 6. Inside a current carrying solenoid the magnetic lines of force are:
A. circular and do not intersect.
B. along the axis of the solenoid and parallel to each other.
C. perpendicular to the axis of the solenoid.
D. none of these
Solution. Correct option: B. Each turn of the solenoid produces a field along its axis inside the coil. These add up so that inside the solenoid the field lines are parallel straight lines along the axis, i.e. the field is uniform.
Teacher's Note: Uniform field inside a long solenoid: parallel, equally spaced lines along axis.
Exam Note: Uniform field: straight, parallel lines along the axis.
Question 7. The material of the core of a strong electromagnet is:
A. steel
B. soft iron
C. wrought iron
D. brass
Solution. Correct option: B. Soft iron is magnetised easily and loses its magnetism quickly when the current is switched off, which is why it is used as the core of an electromagnet. Steel retains magnetism and is used for permanent magnets.
Teacher's Note: Electromagnets need magnetism that switches off quickly: soft iron does this.
Exam Note: Soft iron for electromagnets; steel for permanent magnets.
Question 8. The direction of induced potential difference is given by:
A. Cork screw rule
B. Right hand thumb rule
C. Fleming's left-hand rule
D. Fleming's right hand rule
Solution. Correct option: D. Fleming's right-hand rule gives the direction of the induced current (and emf) in a conductor moving in a magnetic field, as in a generator. Fleming's left-hand rule gives the direction of force on a current-carrying conductor in a field.
Teacher's Note: Right hand for generator (induced current), left hand for motor (force).
Exam Note: Right hand: generator; left hand: motor.
Question 9. The principle of which of these devices is electromagnetism:
A. galvanometer
B. motor
C. transformer
D. all of these
Solution. Correct option: D. A galvanometer and a motor work on the magnetic effect of current (force on a current-carrying conductor in a magnetic field), and a transformer works on electromagnetic induction (mutual induction between two coils). All of these are based on electromagnetism.
Teacher's Note: Each device uses magnetic effect of current or electromagnetic induction.
Exam Note: Name principle for each device before choosing 'all'.
Question 10. The magnetic field around a current carrying conductor is:
A. directly proportional to r
B. inversely proportional to r
C. directly proportional to r2
D. inversely proportional to r2
Solution. Correct option: B. For a long straight conductor, B(2πr) = μ0I, so B = μ0I/(2πr). The field is therefore inversely proportional to the distance r from the conductor.
Teacher's Note: Field of a straight wire weakens as one over distance from the wire.
Exam Note: B = μ0I/2πr; remember inverse proportionality to r.
Question 11. The strength of the magnetic field of a solenoid does not depend upon:
A. current through it
B. number of turns of the coil
C. core of the coil
D. area of the coil
Solution. Correct option: D. The field inside a solenoid is B = μnI. It depends on the current, the number of turns per unit length and the core material, but not on the area of cross-section of the coil.
Teacher's Note: B equals mu times n times I; cross-section area does not appear.
Exam Note: Recall formula B = μnI to eliminate options.
Question 12. The phenomenon of electromagnetic induction is:
A. the process of charging a body
B. the process of generating a magnetic field due to current passing through a coil.
C. producing induced current in a coil by relative motion between a magnet and a coil.
D. the process of rotating a coil of an electric motor.
Solution. Correct option: C. Electromagnetic induction is the production of an induced emf and current in a coil when there is relative motion between a magnet and the coil, which changes the magnetic flux linked with the coil.
Teacher's Note: Relative motion changes flux; faster change gives larger induced emf.
Exam Note: Definition: induced current due to changing flux.
Question 13. A device used for producing current is:
A. generator
B. voltmeter
C. ammeter
D. galvanometer
Solution. Correct option: A. A generator produces electric current by electromagnetic induction. A rotating coil between the poles of a magnet cuts the field, the flux linked with it changes and an induced current flows in the external circuit.
Teacher's Note: Generator converts mechanical energy into electrical energy by rotating coil in field.
Exam Note: Voltmeter, ammeter, galvanometer only measure; they do not produce current.
Comprehensive Exercises (T/F)
Question 1. Write true or false for the following statements: If the direction of current is reversed, the direction of magnetic field is also reversed.
Solution. True. By the right-hand thumb rule, when the direction of current is reversed, the direction of the magnetic field is also reversed.
Teacher's Note: Field direction follows current direction in the thumb rule.
Exam Note: Reverse current gives reverse field; compass deflection reverses.
Question 2. Write true or false for the following statements: To find the direction of magnetic field around a current carrying conductor, we use Fleming's left-hand rule.
Solution. False. The direction of the magnetic field around a current-carrying conductor is found with the right-hand thumb rule. Fleming's left-hand rule gives the direction of force on a current-carrying conductor in a magnetic field.
Teacher's Note: Thumb rule gives field; Fleming's left-hand rule gives force.
Exam Note: Match each rule with its use.
Question 3. Write true or false for the following statements: Magnetic field due to a straight current-carrying conductor is in the form of concentric circles.
Solution. True. The magnetic field lines around a straight conductor are concentric circles centred on the conductor, in a plane perpendicular to it (right-hand thumb rule).
Teacher's Note: Circles get larger and weaker with distance from the wire.
Exam Note: Concentric circles around a straight wire.
Question 4. Write true or false for the following statements: A current carrying solenoid behaves like a bar magnet.
Solution. True. The field pattern of a current-carrying solenoid is the same as that of a bar magnet, with one end acting as a north pole and the other as a south pole.
Teacher's Note: Solenoid has N and S ends, like a bar magnet.
Exam Note: Solenoid field resembles a bar magnet's.
Question 5. Write true or false for the following statements: Inside a solenoid, the magnetic field is constant in magnitude and direction.
Solution. True. Inside a long solenoid the magnetic field lines are parallel, equally spaced straight lines along the axis, so the field is uniform (constant in magnitude and direction).
Teacher's Note: Uniform field is the key property of a long solenoid.
Exam Note: Say: parallel, equally spaced lines inside.
Question 6. Write true or false for the following statements: Magnetic field produced by a current carrying solenoid depends directly upon the strength of the current.
Solution. True. The magnetic field inside a solenoid is B = μnI, so it is directly proportional to the current (B ∝ I).
Teacher's Note: B = mu n I shows direct proportion with current.
Exam Note: Use B proportional to I.
Question 7. Write true or false for the following statements: In order to find the force experienced by a current carrying conductor, we can use Maxwell's cork screw rule.
Solution. False. Maxwell's cork screw rule (like the right-hand thumb rule) gives the direction of the magnetic field due to a current. The force on a current-carrying conductor in a magnetic field is found with Fleming's left-hand rule.
Teacher's Note: Corkscrew rule finds field direction; force needs Fleming's left-hand rule.
Exam Note: Do not confuse field rules with force rule.
Question 8. Write true or false for the following statements: Whenever magnetic field through a coil is changed, a potential difference is produced in the coil.
Solution. True. Whenever the magnetic flux linked with a coil changes, an induced emf (potential difference) is produced in the coil by electromagnetic induction.
Teacher's Note: Any change in flux induces emf in the coil.
Exam Note: Emf is produced when flux linked changes.
Question 9. Write true or false for the following statements: The strength of the induced potential difference depends on the relative speed between the coil and the magnet.
Solution. True. The faster the relative motion between the coil and the magnet, the faster the flux changes, so the larger is the induced potential difference.
Teacher's Note: Rate of flux change decides the size of induced emf.
Exam Note: Faster relative motion gives larger induced emf.
Question 10. Write true or false for the following statements: Electric motor converts mechanical energy into electrical energy.
Solution. False. An electric motor converts electrical energy into mechanical energy. A generator converts mechanical energy into electrical energy.
Teacher's Note: Motor: electrical to mechanical; generator: mechanical to electrical.
Exam Note: Learn motor and generator energy conversions.
Question 11. Write true or false for the following statements: Fleming's right hand rule can be used to find the direction of magnetic field.
Solution. False. Fleming's right-hand rule gives the direction of the induced current in a conductor moving in a magnetic field (used in generators). The direction of the magnetic field due to a current is found by the right-hand thumb rule.
Teacher's Note: Right-hand rule gives induced current direction, not the field around a wire.
Exam Note: Fleming's right-hand rule: induced current.
Question 12. Write true or false for the following statements: Electric generator works on the principle of electromagnetic induction.
Solution. True. In a generator, a coil is rotated between the poles of a magnet. The magnetic flux linked with the coil changes, so an emf is induced by electromagnetic induction.
Teacher's Note: Rotating coil changes flux, inducing emf: the generator principle.
Exam Note: Principle of generator: electromagnetic induction.
Question 13. Write true or false for the following statements: The electric current that always flows in the same direction is called alternating current.
Solution. False. Current that always flows in the same direction is called direct current (DC). Current that reverses its direction after equal intervals of time is called alternating current (AC).
Teacher's Note: Direct current keeps direction; alternating current reverses periodically.
Exam Note: Define AC and DC correctly.
Question 14. Write true or false for the following statements: Normally red colour cable is used for live wire.
Solution. True. In domestic wiring the live wire has red insulation, the neutral wire has black insulation and the earth wire has green insulation.
Teacher's Note: Colour coding: red live, black neutral, green earth.
Exam Note: Remember red-live, black-neutral, green-earth.
Question 15. Write true or false for the following statements: All the distribution circuits for domestic purpose are parallel connections.
Solution. True. Domestic circuits use parallel connections so that each appliance gets the same potential difference and can be switched on or off independently; if one appliance fails the others keep working.
Teacher's Note: Parallel wiring gives each appliance full voltage and independent switching.
Exam Note: Give both advantages: same voltage, independent working.
Question 16. Write true or false for the following statements: One should always use rubber gloves and rubber shoes when dealing with electricity.
Solution. True. Rubber is a good insulator, so rubber gloves and shoes prevent current from passing through the body and protect against electric shock.
Teacher's Note: Insulators stop current passing through your body.
Exam Note: Reason: rubber is an insulator.
Question 17. Write true or false for the following statements: Earthing of electrical appliances is very important.
Solution. True. Earthing is a safety measure. If the live wire touches the metal body of an appliance, the current flows to the earth through the earth wire instead of through a person touching it.
Teacher's Note: Earthing gives leaked current a path to ground, saving users.
Exam Note: Earthing prevents electric shock.
Question 18. Write true or false for the following statements: Like magnetic poles attract each other; unlike poles repel.
Solution. False. Like magnetic poles repel each other and unlike poles attract each other.
Teacher's Note: Remember: like repel, unlike attract.
Exam Note: Correct statement: unlike poles attract.
Question 19. Write true or false for the following statements: If you strike a sharp edge of a metallic knife against the north pole of a bar magnet, it will induce a north pole.
Solution. False. A magnetic material touched to the north pole of a magnet gets an opposite (south) pole induced at the touching end, and a north pole at the far end. So a north pole is not induced at the touching edge.
Teacher's Note: Induction makes the near end opposite to the magnet's pole.
Exam Note: Induced pole at the touching end is opposite.
Question 20. Write true or false for the following statements: The magnetic field produced by a current in a straight wire has no poles.
Solution. True. The field lines of a straight current-carrying wire are closed concentric circles with no starting or ending point, so the field has no north or south pole; the compass needle points along the tangent to the circles.
Teacher's Note: Closed circular lines have no beginning or end, hence no poles.
Exam Note: Field lines are closed loops, so no poles.
Question 21. Write true or false for the following statements: An electric generator is a device that converts electrical energy into mechanical energy.
Solution. False. An electric generator converts mechanical energy (used to rotate the coil between the magnets) into electrical energy by electromagnetic induction.
Teacher's Note: Generator output is electrical energy; motor output is mechanical.
Exam Note: Generator: mechanical to electrical energy.
Free study material for Science
Download Evergreen Solutions for Class 10 Math PDF
Access Class 10 Mathematics Solutions
Explore reliable mathematical solutions for Evergreen Solutions Class 10 Science Chapter 13 Magnetic Effects Of Electric Current tailored for Class 10 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Detailed Calculation Guides for Class 10
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Explore More Study Resources for Class 10 Math
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.