Evergreen Solutions Class 10 Science Chapter 10 Light Reflection And Refraction

Official Textbook Solutions: Class 10 Science Chapter 10 Light Reflection And Refraction

Review structured textbook solutions for Class 10 Science Chapter 10 Light Reflection And Refraction prepared by . Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Science: Chapter 10 Light Reflection And Refraction

Access the complete solution PDF for Class 10 Science below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Periodic Test

Question 1. Complete the following ray diagram by drawing suitable rays. (A convex mirror with its principal focus F and an object AB in front of it is shown; one ray from A is directed towards F.)

Solution. The ray from A directed towards the principal focus F is reflected parallel to the principal axis. The ray from A incident at the pole P is reflected making the same angle with the principal axis on the other side. The two reflected rays diverge; when produced backwards (dotted lines) they meet behind the mirror, between P and F, at A′. A′B′ is the virtual, erect and diminished image.

ABPFA′B′

Teacher's Note: A ray aimed at F reflects parallel; a ray at P reflects symmetrically. Extend reflected rays backwards with dotted lines.

Exam Note: Arrows on rays and dotted back-extensions are essential.

Question 2. Complete the following ray diagram by drawing suitable rays. (A concave mirror with centre of curvature C and a point object A beyond C is shown; two rays from A are drawn, one passing through C and one falling at the pole P.)

Solution. For concave mirror: the ray from A passing through the centre of curvature C falls normally on the mirror and is reflected back along the same path. The ray from A falling at the pole P is reflected making an equal angle with the principal axis, on the other side of it. The two reflected rays meet in front of the mirror, between C and F, below the axis, at A′, which is the real image of A.

APCFA′

Teacher's Note: A ray through C strikes normally and retraces itself. The ray at P obeys equal angles about the axis.

Exam Note: Show both reflected rays meeting at A′, with arrows.

Question 3. What is the difference between virtual images produced by concave, plane and convex mirrors?

Solution. The virtual image formed by concave mirror is magnified, that produced by plane mirror is of the same size and that by a convex mirror is diminished.

Teacher's Note: Compare size only: concave enlarged, plane same size, convex smaller. All are erect and formed behind the mirror.

Exam Note: Three mirrors, three sizes: magnified, same, diminished.

Question 4. For driving a car what type of mirror would you prefer to see the traffic at your back and why? Explain why it is preferred over a plane mirror?

Solution. A convex mirror is used to see the traffic at the back. It is because a convex mirror always forms an erect though diminished image of the object. It has a wider field of view. So, we will be able to see a much larger area at the back than with a plane mirror while driving the car.

Teacher's Note: Convex mirror curves outwards, so it collects rays from a wide area and gives an erect, smaller image.

Exam Note: Name convex mirror; give erect image and wider field.

Question 5. An erect image three times the size of the object is formed with a concave mirror of radius of curvature 36 cm. What is the position of the image?

Solution. For an erect image, magnification is positive. Thus, m = +3 for an erect image three times the size of the object.

For a concave mirror, f = −R/2 = −18 cm.

m = −v/u = 3, so v = −3u.

Using the mirror formula, 1/v + 1/u = 1/f

− 1/(3u) + 1/u = 1/f ⇒ 2/(3u) = − 1/18 ⇒ u = −12 cm

Then v = −3u = +36 cm.

Thus, the image is formed behind the mirror at a distance of 36 cm.

Teacher's Note: Erect and magnified means a virtual image, so the object lies between P and F. Apply signs carefully.

Exam Note: Write m = +3, f = −18 cm; v = +36 cm.

Question 6. Copy the figure and show the image formation with the help of rays. Write three characteristics of the image formed. (A concave mirror with centre of curvature C and focus F is shown; the object AB stands on the axis between C and F.)

Solution. Draw a ray from A parallel to the principal axis; after reflection it passes through the focus F. Draw a second ray from A through F; after reflection it travels parallel to the principal axis. The two reflected rays meet at A′ beyond C. A′B′ is the image.

Characteristics of the image: (i) it is formed beyond the centre of curvature C, (ii) it is real and inverted, (iii) it is magnified (larger than the object).

ABPFCA′B′

Teacher's Note: Object between F and C gives a real, inverted, enlarged image beyond C. Use parallel and focus rays.

Exam Note: Diagram with arrows, then three characteristics.

Question 7. Discuss the position and nature of the image formed by a concave mirror when the object is moved from infinity towards the pole of mirror.

Solution. As the object is moved from infinity towards the pole of a concave mirror, the image formed starts shifting from the focus of the mirror towards infinity and then appears behind the mirror.

Position of objectPosition of imageNature and size of image
At infinityAt focus FReal, inverted, highly diminished (point-sized)
Beyond CBetween F and CReal, inverted, diminished
At CAt CReal, inverted, same size
Between C and FBeyond CReal, inverted, magnified
At FAt infinityReal, inverted, highly magnified
Between F and PBehind the mirrorVirtual, erect, magnified

Teacher's Note: Image moves away as object nears F; inside F it becomes virtual, erect, behind the mirror.

Exam Note: Tabulate all six positions with nature and size.

Question 8. Figure below shows an object AB placed on the principal axis of a convex lens placed in air. F₁ and F₂ are the two foci of the lens. Copy the diagram. (i) Draw a ray of light starting from B and passing through O. Show the same ray after refraction by the lens. (ii) Draw another ray from B which passes through F₂ after refraction by the lens. (iii) Locate the final image formed. (iv) Is the image real or inverted?

Solution. (i) The ray from B passing through the optical centre O goes straight, without any deviation.

(ii) The ray from B parallel to the principal axis is refracted by the lens so that it passes through the focus F₂.

(iii) The two refracted rays do not meet on the right of the lens; they appear to meet when produced backwards (dotted lines) at B′ on the same side as the object. A′B′ is the final image.

(iv) The object is between F₁ and the lens, so the image is virtual, erect and larger than the object. (It is neither real nor inverted.)

BAOF₁F₂B′A′

Teacher's Note: Object inside the focal length gives a virtual, erect, magnified image on the same side as the object.

Exam Note: State virtual, erect, enlarged; show dotted extensions.

Question 9. Find the position, nature and size of the image of an object 3 cm high placed at a distance of 9 cm from a concave mirror of focal length 18 cm.

Solution. Given: height of object h = +3 cm, object distance u = −9 cm, focal length of concave mirror f = −18 cm.

Using the mirror formula, 1/v + 1/u = 1/f

1/v = 1/f − 1/u = −1/18 + 1/9 = 1/18

v = +18 cm

Magnification m = h′/h = −v/u = −18/(−9) = +2

h′ = m × h = +2 × 3 = +6 cm

Thus, the image is formed 18 cm behind the mirror; it is virtual, erect and magnified, 6 cm high. (The object is inside the focus, so a real, inverted image is not possible.)

Teacher's Note: Object at 9 cm lies inside f = 18 cm, so image is virtual, erect, enlarged.

Exam Note: Substitute with signs; state v, m and h′.

Question 10. With the help of ray diagrams, show the formation of image of an object by a concave mirror, when it is placed: (i) beyond the centre of curvature (ii) at the centre of curvature.

Solution. (i) When the object is beyond the centre of curvature: the image is formed between F and C, real, inverted and diminished.

ABPFCA′B′

(ii) When the object is at the centre of curvature: the image is formed at C, real, inverted and of the same size as the object.

ABPFCA′B′

Teacher's Note: Use the parallel ray and the ray through F. Beyond C: diminished; at C: same size.

Exam Note: Both diagrams with arrows, and nature of each image.

Comprehensive Exercises (MCQ)

Question 1. Multiple images are formed by a thick plane mirror. Which of the following is the brightest of all the images? A. First B. second C. third D. fourth

Solution. For a thick plane mirror, first reflection will take place through the glass surface and the second through the silvered surface. The silvered surface is much more reflective than the glass surface. The third reflection will be after reflection from front and then from the silvered surface. So, the second reflection will be more effective and the second image will be the brightest.

Answer: B. second.

Teacher's Note: Most light reflects at the silvered back surface, so the second image is brightest; the first is faint.

Exam Note: Brightest image comes from the silvered surface.

Question 2. A plane mirror is placed vertically facing due north. An arrow pointing north-east is kept in front of the mirror. In which direction will the arrow point in this image? A. north-east B. south-east C. south-west D. north-west

Solution. The arrow pointing north-east is the resultant of two directions, north and east. The component along the mirror (east) remains the same on reflection. The component perpendicular to the mirror (north) is reversed. Thus, the image will have an arrow pointing south and east, i.e. south-east.

Answer: B. south-east.

Teacher's Note: Only the component perpendicular to the mirror reverses; the component parallel to it stays unchanged.

Exam Note: Resolve into components and reverse the perpendicular one.

Question 3. When a plane mirror is rotated through a certain angle, the reflected ray turns through twice as much and the size of the image: A. is doubled B. is halved C. becomes infinite D. remains same

Solution. The size of the image does not change when the mirror is rotated by a certain angle. But the reflected ray rotates through twice the angle of rotation of the mirror.

Answer: D. remains same.

Teacher's Note: Plane mirror image always equals object size; only the direction of the reflected ray changes, by twice the angle.

Exam Note: Reflected ray turns 2θ; image size unchanged.

Question 4. The image formed by a convex mirror is only one-third of the size of the object. If the focal length of the mirror is 12 cm, the image formed will be A. 8 cm behind the mirror B. 10 cm behind the mirror C. 8 cm in front of the mirror D. 10 cm in front of the mirror

Solution. Given, height of image h′ = (height of object h)/3 and focal length of mirror f = +12 cm.

m = h′/h = −v/u = 1/3 ⇒ u = −3v

Using the mirror formula, 1/v + 1/u = 1/f

1/v + 1/(−3v) = 1/12 ⇒ 2/(3v) = 1/12 ⇒ v = 8 cm

As v is positive, the image is formed 8 cm behind the mirror.

Answer: A. 8 cm behind the mirror.

Teacher's Note: Convex mirror: f positive, image virtual. Use m = −v/u, then the mirror formula.

Exam Note: Use m = −v/u first; v = +8 cm.

Question 5. A beam of light incident on a plane mirror forms a real image on reflection. The incident beam is: A. parallel B. convergent C. divergent D. not certain

Solution. A real image is formed when the rays of light are convergent and a virtual image is formed when the rays of light diverge. The convergent rays meet to form a real image and the divergent rays appear to meet to form a virtual image.

Answer: B. convergent.

Teacher's Note: A plane mirror forms a real image only of a virtual object: the incident beam must converge.

Exam Note: Real image needs a convergent incident beam.

Question 6. If an object is placed symmetrically between two plane mirrors, inclined at an angle of 72°, then total number of images formed is: A. 5 B. 4 C. 2 D. infinite

Solution. The number of images formed if two plane mirrors are kept at an angle θ is n = 360°/θ − 1 if 360°/θ is even; if 360°/θ is odd, n = 360°/θ for an object placed unsymmetrically, but n = 360°/θ − 1 when the object is placed symmetrically (on the bisector).

For θ = 72°, 360°/72° = 5, which is odd. The object is symmetrically placed, so n = 5 − 1 = 4.

Answer: B. 4. (The source key gives 5, which holds only for an unsymmetrical object; for a symmetrical object two images coincide, leaving 4.)

Teacher's Note: For odd 360°/θ, symmetrical placement makes two images coincide, so subtract one. Here 5 − 1 = 4.

Exam Note: Use n = 360°/θ − 1 for symmetric objects.

Question 7. A plane mirror produces a magnification of: A. −1 B. +1 C. zero D. between 0 and infinity

Solution. A plane mirror produces an image of the same size as the object. Thus, the value of magnification is 1 in magnitude. The formed image is virtual and erect, and the magnification is positive for a virtual, erect image. Thus, the magnification by a plane mirror is +1.

Answer: B. +1.

Teacher's Note: Same size gives |m| = 1; virtual and erect image gives positive sign, so m = +1.

Exam Note: Magnitude one, sign positive: +1.

Question 8. A dice is placed with one of its edges parallel to the principal axis between the principal focus and the centre of curvature of concave mirror. Then the final image has the shape of: A. cube B. rectangular parallelepiped C. barrel shape D. spherical

Solution. The final image will have the edges perpendicular to the principal axis larger than those of the dice, and the edge along the axis stretched by a different factor. Thus, the image is not a cube but has a similar shape with different dimensions, like a rectangular parallelepiped.

Answer: B. rectangular parallelepiped.

Teacher's Note: Sideways and along-axis magnifications differ, so a cube cannot stay a cube; the book key is parallelepiped.

Exam Note: Follow the book key: rectangular parallelepiped.

Question 9. Two adjacent walls and the ceiling of a rectangular room are mirror surfaced. The number of images of himself that an observer sees is: A. 3 B. 9 C. 6 D. 8

Solution. The number of images formed if two plane mirrors are kept at an angle θ is n = 360°/θ − 1 when 360°/θ is even. For θ = 90°, n = 4 − 1 = 3. So 3 images are formed for each perpendicular mirror pair. Thus 6 images are counted, 3 for the two adjacent walls and 3 for each wall with the ceiling mirror, counting only the images from single pairs.

Answer: C. 6 (book key). Strictly, three mutually perpendicular mirrors also give a seventh image by reflection in all three mirrors, so the full count is 7; since 7 is not among the options, 6 is the expected choice.

Teacher's Note: Three mutually perpendicular mirrors strictly give 2³ − 1 = 7 images; the options force the book key of 6.

Exam Note: Choose option C as the book key says.

Question 10. Image formed by a convex spherical mirror is: A. virtual B. real C. enlarged D. inverted

Solution. A convex spherical mirror always produces a virtual, erect and diminished image of an object.

Answer: A. virtual.

Teacher's Note: Convex mirror: always virtual, erect and diminished, for any real object position.

Exam Note: Virtual, erect, diminished: choose A.

Question 11. A diminished virtual image can be obtained only in: A. plane mirror B. concave mirror C. convex mirror D. all of these

Solution. A convex mirror always produces a diminished, virtual and erect image for a real object. A plane mirror gives a same-size image and a concave mirror gives a magnified virtual image.

Answer: C. convex mirror.

Teacher's Note: Plane mirror gives equal size, concave gives enlarged virtual image; only convex gives diminished virtual image.

Exam Note: Only convex mirrors diminish virtual images.

Question 12. A convex mirror has a focal length f. A real object is placed at a distance f in front of it. The mirror produces an image at: A. infinity B. f C. f/2 D. 2f

Solution. For the convex mirror, focal length = +f and object distance u = −f.

1/v = 1/f − 1/u = 1/f + 1/f = 2/f ⇒ v = f/2

The image is formed behind the mirror, between the pole and the focus, at a distance f/2 from the mirror.

Answer: C. f/2.

Teacher's Note: Substitute u = −f and f = +f; the image lies behind the mirror between P and F.

Exam Note: Show 1/v = 2/f, so v = f/2.

Question 13. A light ray incident normally on a plane mirror suffers deviation of: A. zero B. 90° C. 180° D. 360°

Solution. A light ray incident normally on a plane surface traces back its path. The angle of deviation is the angle between the produced incident ray and the reflected ray.

The angle of deviation is 180° for the above case.

Answer: C. 180°.

Teacher's Note: Normal incidence means angle of incidence is zero, yet the ray reverses direction, so deviation is 180°, not zero.

Exam Note: Deviation 180° although angle of incidence is zero.

Question 14. A convex mirror is used to form the image of a real object. Then tick the wrong statement: A. image lies between the pole and the focus B. image is diminished in size C. image is erect D. image is real

Solution. A convex mirror always forms a virtual, erect and diminished image for a real object irrespective of its position, between the pole and the focus. So the statement that the image is real is wrong.

Answer: D. image is real.

Teacher's Note: Convex mirror images are never real for a real object; the wrong statement is the one claiming real.

Exam Note: Pick the statement contradicting virtual image.

Question 15. An object is placed at a distance of 40 cm in front of a concave mirror of focal length 20 cm. The image produced is: A. virtual and inverted B. real and erect C. real, inverted and diminished D. real, inverted and of same size

Solution. The radius of curvature of the mirror is double the focal length (R = 2f = 40 cm). The object distance is equal to the radius of curvature, so the object is at the centre of curvature C.

Check: 1/v = 1/f − 1/u = −1/20 + 1/40 = −1/40, so v = −40 cm, m = −v/u = −1.

The image formed at the centre of curvature of the concave mirror is real, inverted and of the same size.

Answer: D.

Teacher's Note: Object distance equals 2f, so the object is at C and the image is also at C, same size.

Exam Note: Object at C gives real, inverted, same-size image.

Question 16. Two plane mirrors are at right angles to each other. A man stands between them and combs his hair with the right hand. In how many images will he be seen using his left hand? A. none B. 1 C. 2 D. 3

Solution. Total number of images formed by two mirrors at right angles is 360°/90° − 1 = 4 − 1 = 3. But only one image will have the man with comb in his right hand. This image is produced by the double reflection (reflection from both mirrors in turn). Thus, two images will have the man combing with the left hand.

Answer: C. 2.

Teacher's Note: Single reflection flips left-right; a double reflection flips it back. So two images show the left hand.

Exam Note: Three images: two single-reflection, one double.

Comprehensive Exercises (T/F)

Question 1. Write true or false for the following statements: Laws of reflection are true only for plane mirror and not for curved mirrors.

Solution. False

The Laws of reflection are valid for any reflecting surface including spherical surfaces. So, they are valid for both plane and curved mirrors.

Teacher's Note: For curved mirrors apply the laws at each point, with the normal along the radius at that point.

Exam Note: False: laws hold for all reflecting surfaces.

Question 2. Write true or false for the following statements: The radius of curvature of a spherical mirror is half of the focal length.

Solution. False

The radius of curvature of a spherical mirror is twice of its focal length. (R = 2f)

Teacher's Note: Focal length is half the radius of curvature: f = R/2, so R = 2f. Do not reverse it.

Exam Note: Correct statement: R = 2f.

Question 3. Write true or false for the following statements: The rays travelling parallel to the principal axis after reflecting from the concave mirror pass or appear to pass through the focus.

Solution. True

A concave mirror converges parallel rays to its principal focus; this is the definition of the focus.

Teacher's Note: Concave mirror: parallel rays actually pass through F. For a convex mirror they appear to come from F.

Exam Note: True: focus is where parallel rays meet.

Question 4. Write true or false for the following statements: Convex mirror can be used to see large image of small object.

Solution. False

A convex mirror always produces a diminished image of the object. It can never produce an image larger than the size of the object.

Teacher's Note: Convex mirrors always diminish, which is why they give a wide field of view, not enlargement.

Exam Note: False: convex image is always smaller.

Question 5. Write true or false for the following statements: A convex mirror always forms a virtual and erect image.

Solution. True

For every position of a real object, a convex mirror forms a virtual, erect and diminished image behind the mirror.

Teacher's Note: For every real object position, a convex mirror gives an image behind it that is virtual and erect.

Exam Note: True: virtual, erect, diminished.

Question 6. Write true or false for the following statements: A concave mirror can be used to obtain a parallel beam of light from a small lamp.

Solution. True

When a small lamp is kept at the focus of the concave mirror, the rays of light emitted from the lamp after reflection on its surface pass parallel to the principal axis.

Teacher's Note: Torches and headlights put the bulb at the focus of a concave reflector to get a parallel beam.

Exam Note: True: lamp at the focus gives parallel beam.

Question 7. Write true or false for the following statements: A plane mirror can be used to form a real image equal in size as of the object.

Solution. False

A plane mirror always produces a virtual image for a real object.

Teacher's Note: Plane mirror images of real objects are virtual and cannot be caught on a screen, though equal in size.

Exam Note: False: plane mirror image is virtual.

Question 8. Write true or false for the following statements: A virtual, magnified and erect image can be formed by a concave mirror.

Solution. True

When an object is kept between the focus and pole of a concave mirror, a virtual, magnified and erect image is obtained behind the mirror.

Teacher's Note: Object between P and F gives an enlarged erect image behind the mirror, as in shaving mirrors.

Exam Note: True: object between pole and focus.

Question 9. Write true or false for the following statements: When a plane mirror is turned by an angle θ, the reflected rays turn by an angle θ.

Solution. False

When a plane mirror is turned by an angle θ, the reflected ray turns by an angle 2θ.

Teacher's Note: Rotating the mirror by θ rotates the normal by θ, so the reflected ray turns through 2θ.

Exam Note: False: reflected ray turns by 2θ.

Question 10. Write true or false for the following statements: In a plane mirror, the distance between image and the mirror is the same as distance between object and the mirror.

Solution. True

In a plane mirror, the image distance is equal to the object distance.

Teacher's Note: The image is as far behind the mirror as the object is in front, on the line perpendicular to it.

Exam Note: True: image distance equals object distance.

Question 11. Write true or false for the following statements: If an object is placed in between two plane mirrors inclined at an angle 45°, then the number of images formed will be 9.

Solution. False

The number of images formed if two plane mirrors are kept at an angle θ is 360°/θ if 360°/θ is odd (object unsymmetrical), and 360°/θ − 1 if 360°/θ is even.

For θ = 45°, 360°/45° = 8 is an even number, so the number of images = 8 − 1 = 7, not 9.

Teacher's Note: Check whether 360°/θ is odd or even before choosing the formula. Here it is 8, even, so 7 images.

Exam Note: Show 360°/45° = 8, so n = 7.

Question 12. Write true or false for the following statements: The frequency, wavelength or speed of light does not change on reflection.

Solution. True

On reflection light stays in the same medium, so its speed, frequency and wavelength remain unchanged.

Teacher's Note: These change on refraction (speed and wavelength) but not on reflection, as the medium is unchanged.

Exam Note: True: reflection stays in the same medium.

Question 13. Write true or false for the following statements: Mirror formula is relation between height of the image and the height of the object.

Solution. False

Mirror formula is a relation between the object distance, image distance and the focal length of a mirror. Magnification formula deals with the height of the image and the height of the object.

Teacher's Note: Mirror formula 1/v + 1/u = 1/f links distances; the magnification formula links heights and distances.

Exam Note: False: it relates u, v and f.

Question 14. Write true or false for the following statements: Mirror formula is the same irrespective of convex mirror or a concave mirror.

Solution. True

Mirror formula does not change for concave and convex mirror. The sign conventions are changed according to the nature of mirror.

Teacher's Note: Same formula for both mirrors; only the signs of f, u and v change with the Cartesian sign convention.

Exam Note: True: only the signs differ.

Question 15. Write true or false for the following statements: Magnification equation is a relation between image distance and object distance.

Solution. True

Magnification m = h′/h = −v/u. It relates the height of the image to the height of the object and also to the image distance and object distance.

Teacher's Note: m = h′/h = −v/u, so it connects image and object distances as well as heights.

Exam Note: True: m equals −v/u.

Question 16. Write true or false for the following statements: Magnification equation is the same irrespective of convex mirror and concave mirror.

Solution. True

The magnification equation is not changed for convex and concave mirror. The height of the object and the height of the image are taken positive or negative as per the sign convention.

Teacher's Note: One equation, m = −v/u, works for all mirrors with signs applied; positive m means erect.

Exam Note: True: same equation for both mirrors.

Download Evergreen Solutions for Class 10 Math PDF

Download Evergreen Solutions for Class 10

Explore reliable mathematical solutions for Evergreen Solutions Class 10 Science Chapter 10 Light Reflection And Refraction tailored for Class 10 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Concept-Driven Math Answers

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Additional Study Materials for 2026

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 10 Science?

They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 10 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 10 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 10 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 10 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.