All In One Solutions Class 10 Science Chapter 10 Light Reflection And Refraction

Solutions for Class 10 Science: Chapter 10 Light Reflection And Refraction

Access comprehensive textbook solutions for Chapter 10 Light Reflection And Refraction using the reference material for Class 10 Science. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Practice Class 10 Science Solutions: Chapter 10 Light Reflection And Refraction

Access the complete solution PDF for Class 10 Science below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Check Point 01

Question 1. Why does a ray of light passing through the centre of curvature of a concave mirror gets reflected along same path after reflection?

Solution.

When ray of light passes through the center of curvature of the concave mirror it strikes along the normal, that means it falls on the mirror perpendicularly (angle of incidence = 0°, i.e. 90° to the mirror surface).

Thus by the law of reflection, which states that the angle of incidence is always equal to the angle of reflection, the angle of reflection is also 0°.

Hence the incident ray coincides with the normal and retraces its path after reflection from the spherical mirror.

The figure below illustrates the above situation.

incident ray (blue), reflected ray (red) on the same lineCFPnormal

Teacher's Note: A ray through the centre of curvature falls along the normal, so angle of incidence is zero.

Exam Note: Ray through C retraces its path; angle of incidence is 0°.

Question 2. What kind of image is formed on a cinema screen?

Solution.

Image formed is real and erect because real image is formed on the screen, and it is not inverted because the object inside the projector is inverted already,

therefore its image will come as erect image, hence we are able to produce the image on screen as well as keep it erect.

Teacher's Note: A cinema projector holds an inverted film frame, so the screen shows a real, erect image of it.

Exam Note: Cinema image: real and erect (film is loaded inverted).

Question 3. What do you mean by laterally inverted?

Solution.

A mirror forms an image such that its left side is object’s right side and its right side is object’s left side. This phenomenon of change in object and image sides is known as lateral inversion.

For example, the word AMBULANCE is painted left-right inverted on the ambulance so that when the driver of a vehicle in front looks into his rear-view mirror, he can make out the word AMBULANCE quickly and give way. As shown in the figure below.

Look at the vehicle (as painted)AMBULANCELook in the rear-view mirrorAMBULANCEPainted laterally inverted, it reads correctly in a mirror

Teacher's Note: A plane mirror swaps left and right of the image; this is called lateral inversion.

Exam Note: Lateral inversion: left becomes right; AMBULANCE written inverted.

Question 4. The image formed by a convex mirror is observed to be virtual, erect and extremely diminished than the object, what should be the position of the object?

Solution.

Convex mirror always forms virtual, erect and diminished image of an object but when the object is kept at infinity the image is formed at focus and is extremely diminished. As shown in the figure below.

FCPParallel rays after reflection appear to diverge from F

Teacher's Note: A convex mirror always forms a virtual, erect, diminished image; for a distant object it is at focus.

Exam Note: Object at infinity: image at F, virtual, erect, highly diminished.

Question 5. Which type of spherical mirror has a larger field of view?

Solution.

Convex mirror has a larger field of view because it is diverging in nature. The light rays incident on it gets diverged following the laws of reflection, the reflected rays form the wider path as shown in the figure below.

ImageD (driver)The reflected rays spread out, so the mirror shows a wide field of view

Due to large field of view convex mirrors are used as rear-view mirrors in vehicles.

Teacher's Note: A convex mirror diverges light, so it shows a wider area than a plane or concave mirror.

Exam Note: Convex mirror: larger field of view; used as vehicle rear-view mirror.

Question 6. If a ray of light is incident on a plane mirror such that it makes an angle of 30° with the mirror, then what will be the angle of reflection?

Solution.

Ray of light strikes the mirror at an angle of 30°.

⇒ It will make an angle of 60° (90° – 30°) with the normal. As shown in the figure below.

normal30°i = 60°r = 60°Plane mirror

∴ Angle of incidence = 60°.

Now, By laws of reflection;

Angle of Incidence = Angle of reflection;

⇒ Angle of reflection = 60°.

Hence Angle of reflection is 60°.

Teacher's Note: Angles of incidence and reflection are measured from the normal, not from the mirror surface.

Exam Note: Angle with mirror 30° means angle of incidence 60°; r = i.

Check Point 02

Question 1. A spherical mirror has focal length -10 cm. What type of mirror is it likely to be?

Solution.

The mirror is likely to be the concave mirror because the focal length of the concave mirror is negative because the focus is on the left-hand side of the mirror which is taken to be negative according to sign convention.

Thus the required spherical mirror is a concave mirror of focal length 10 cm.

Teacher's Note: By the new Cartesian sign convention, a concave mirror has negative focal length.

Exam Note: Negative f: concave mirror; positive f: convex mirror.

Question 2. If the magnification of an image formed by a mirror is positive, what does it mean?

Solution.

Positive magnification means that both the object and the image formed by a spherical mirror (concave or convex) are erect (upright). An erect image is always virtual. Thus, positive magnification indicates that the image formed by a spherical mirror is virtual, erect.

Teacher's Note: Positive magnification means the image is erect, and for mirrors an erect image is always virtual.

Exam Note: m positive: virtual, erect image.

Question 3. What is the magnification produced by a rear view mirror fitted in vehicles?

Solution.

Convex mirrors are used in vehicles for rear view due to their wide field of view. And the convex mirror forms a virtual, erect and diminished image of the object. Therefore, magnification (m) produced by a rear view mirror fitted in vehicles is less than one i.e., m < +1 because

Magnification (m) = \( \frac{\text{Image height}}{\text{Object height}} \)

And image size is less than the object size.

Teacher's Note: A convex rear-view mirror gives a virtual, erect, smaller image, so magnification is positive but less than one.

Exam Note: Rear-view mirror: convex, 0 < m < 1.

Question 4. Rays from the sun converge at a point 15 cm in front of a concave mirror. Where an object should be placed, so that its image formed is equal to the size of the object?

Solution.

The rays from sun coming from infinity are parallel to principal axis after reflection they converge at a point, known as focus. Therefore, focal length (F) of concave mirror is 15 cm.

And we know that same size, real and inverted image is formed by concave mirror when object is placed at centre of curvature = 2×Focal length (F). So to form same size image object will be placed at 15x2 = 30cm.

Teacher's Note: A concave mirror gives a same-size real inverted image when the object is at the centre of curvature.

Exam Note: Same size image: object at C = 2f = 30 cm.

Question 5. An object is placed at a distance of 8 cm from a convex mirror of focal length 12 cm. Find the position of the image formed?

Solution.

According to the question;

Focal length (f) = 12cm;

Object distance (u) = -8cm;

By mirror formula;

\( \frac{1}{v} + \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{v} + \frac{1}{-8} = \frac{1}{12} \)

\( \Rightarrow \frac{1}{v} = \frac{1}{8} + \frac{1}{12} \)

\( \Rightarrow \frac{1}{v} = \frac{3+2}{24} \)

\( \Rightarrow \frac{1}{v} = \frac{5}{24} \)

\( \Rightarrow v = \frac{24}{5} = 4.8\ \text{cm} \)

Since v = 4.8cm which is positive hence image is behind the mirror.

The image is formed at the distance of 4.8 cm behind the mirror and is virtual and erect.

Teacher's Note: Convex mirrors always form virtual, erect, diminished images behind the mirror; use f positive in the mirror formula.

Exam Note: Convex mirror: f positive; v positive means behind mirror.

Question 6. If the object distance for a concave mirror is 24 cm and image distance is 12 cm in front of a mirror. Then, find the magnification of the mirror.

Solution.

Given that;

Object distance (u) = -24cm;

Image distance (v) = -12cm (image is in front of mirror hence v is negative).

Now;

Magnification \( m = -\frac{v}{u} \)

\( \Rightarrow m = -\frac{-12}{-24} = -\frac{1}{2} \)

∴ Magnification is -0.5. Which tells that image is real and inverted and half of the size of the object.

Teacher's Note: Magnification m = −v/u; a negative value means a real, inverted image.

Exam Note: m = −v/u; negative m: real, inverted.

Check Point 03

Question 1. The depth of a bucket filled with water seems to be less than its actual depth. Name the phenomenon responsible for this?

Solution.

The depth appears to be less because of refraction of light. Light rays bend as they move from water to the air. When the light ray from water reaches our eye, the eye traces them back as straight lines (shown as dashed lines) which intersect at a higher position than where the actual rays originated. This causes the depth of a bucket to appear higher and we cannot see the actual depth of the bucket.

The figure below illustrates the same.

EyeBucketWateractual position of coinapparent position

Teacher's Note: Light bends away from the normal as it leaves water, so the bottom appears raised.

Exam Note: Apparent depth less than real depth: refraction.

Question 2. A light ray is incident on a rectangular glass slab at an angle of 60°. What is the angle between the ray coming out of the slab and the normal to the face of rectangular slab from which it comes out?

Solution.

Ray of light strikes the glass slab at an angle of incidence of 60°.

Now, By laws of refraction;

\( \mu = \frac{\sin i}{\sin r} \)

Angle of incidence is 60°

Refractive index of glass slab is 1.5

Putting the value in the above equation, we get

\( 1.5 = \frac{\sin 60^\circ}{\sin r} = \frac{0.866}{\sin r} \)

On solving the above equation, we get

\( \sin r = \frac{0.866}{1.5} \)

Angle of refraction, r= 35.26°

Thus the angle of refraction at the first face is 35.26° from the normal.

The two faces of the slab are parallel, so this ray falls on the second face at an angle of incidence of 35.26°. On leaving the slab it bends away from the normal at the angle e given by

\( \frac{\sin 35.26^\circ}{\sin e} = \frac{1}{1.5} \Rightarrow \sin e = 1.5 \times 0.5774 = 0.866 \Rightarrow e = 60^\circ \)

Hence the angle between the emergent ray and the normal is 60° (the emergent ray is parallel to the incident ray).

Teacher's Note: Emergent ray from a parallel-sided slab is parallel to the incident ray, so it leaves at the same angle.

Exam Note: Slab: emergent angle = incident angle (60°).

Question 3. How is the refractive index of a medium related to the speed of light? Give an expression for refractive index of a medium with respect to another in terms of speed of light in these two media?

Solution.

Refractive index compares the speed of light in a particular medium with the speed of light in vacuum

Relation between refractive index and speed of light:

\( \text{Refractive index } (\mu) = \frac{c\ (\text{speed of light in vacuum})}{v\ (\text{speed of light in any medium})} \)

\( \Rightarrow \mu = \frac{c}{v} \)

Let the refractive index of medium 1 be μ1 and the speed of light in medium 1 is v1.

\( \mu_1 = \frac{c}{v_1} \)

………………….. (1)

Similarly;

Let the refractive index of medium 2 be μ2 and the speed of light in medium2 is v2.

\( \mu_2 = \frac{c}{v_2} \)

………………….. (2)

Dividing (1) by (2),

\( \frac{\mu_1}{\mu_2} = \frac{c/v_1}{c/v_2} = \frac{v_2}{v_1} \)

Hence refractive index of a medium is inversely proportional to the speed of light in that medium.

Teacher's Note: Refractive index is the ratio of speed of light in vacuum to its speed in the medium.

Exam Note: μ = c/v; refractive index inversely proportional to speed.

Question 4. For the same angle of incidence, the angle of refraction in three different media A, B and C are 10°, 25° and 40°, respectively. In which medium the velocity of light will be maximum?

Solution.

Refractive index \( \mu = \frac{c}{v} \) ……(1)

Hence refractive index of a medium is inversely proportional to the speed of light in that medium.

Also \( \mu = \frac{\sin i}{\sin r} \) …………….. (2)

⇒ Refractive index is inversely proportional to the sine of the angle of refraction.

From (1) and (2)

Velocity of light is directly proportional to the sine of the angle of refraction.

Thus velocity of light is maximum in medium C because angle of refraction 40° is maximum.

Teacher's Note: For a fixed angle of incidence, a larger angle of refraction means lower refractive index and faster light.

Exam Note: Larger angle of refraction: smaller μ, higher speed.

Question 5. Calculate the angle of incidence of light ray incident of surface of a plastic slab of refractive index √3, if the angle of refraction is 30°.

Solution.

Given;

Angle of refraction(r) = 30°.

Angle of incidence = i.

Refractive index (μ) = √3.

\( \mu = \frac{\sin i}{\sin r} \)

\( \Rightarrow \sqrt{3} = \frac{\sin i}{\sin 30^\circ} = \frac{\sin i}{1/2} \)

⇒ √3 = 2×sin i

\( \Rightarrow \sin i = \frac{\sqrt{3}}{2} \)

\( \Rightarrow i = 60^\circ \)

Hence angle of incidence is 60°.

Teacher's Note: Snell's law: refractive index equals sin i divided by sin r.

Exam Note: μ = sin i / sin r; sin 60° = √3/2.

Question 6. If a ray of light enters from alcohol to air. The refractive index of alcohol is 1.36. Calculate the speed of light in alcohol with respect to air.

Solution.

Given;

Refractive index of alcohol (μ) = 1.36.

Speed of light in vacuum = 3 × 10⁸ m/s.

\( \mu = \frac{c}{v} = \frac{c\ (\text{speed of light in vacuum})}{v\ (\text{speed of light in alcohol})} \)

\( \Rightarrow 1.36 = \frac{3\times10^8}{\text{speed of light in alcohol}} \)

\( \Rightarrow \text{speed of light in alcohol} = \frac{3\times10^8}{1.36} \)

∴ Speed of light in alcohol = 2.21 × 10⁸ m/s

Speed of light in alcohol with respect to air is 2.21 × 10⁸ m s⁻¹

Teacher's Note: Speed of light in a medium equals c divided by its refractive index.

Exam Note: v = c/μ; use c = 3 × 10⁸ m/s.

Question 7. The refractive index of glass with respect to air is \( \frac{3}{2} \) and refractive index of water with respect to air is \( \frac{4}{3} \). What will be the refractive index of water with respect to glass?

Solution.

Refractive index of air, μair = 1;

Given;

Refractive index of water w.r.t air, \( {}_a\mu_w = \frac{4}{3} \)

Refractive index of glass w.r.t air, \( {}_a\mu_g = \frac{3}{2} \)

Refractive index of water w.r.t glass = gμw =

\( {}_g\mu_w = \frac{{}_a\mu_w}{{}_a\mu_g} = \frac{4/3}{3/2} = \frac{4\times2}{3\times3} = \frac{8}{9} \)

∴ Refractive index of water w.r.t glass is 8/9.

Teacher's Note: Relative refractive index of water to glass equals aμw divided by aμg.

Exam Note: gμw = aμw / aμg = 8/9.

Check Point 04

Question 1. Name the lens which always forms a virtual image of an object.

Solution.

A concave lens always forms the virtual image of an object because it is diverging lens. The image formed is erect as shown in the figure below.

ABA'B'OFF

Teacher's Note: A concave lens always forms a virtual, erect, diminished image between the object and the lens.

Exam Note: Concave lens: image always virtual, erect, diminished.

Question 2. Discuss the case when a convex lens forms a virtual and enlarged image.

Solution.

A virtual, erect and enlarged image is formed at the same side of lens, when an object is placed between principal focus, F1 and optical centre, O of a convex lens. Figure below shows the image formation.

ABA'B'OFF2F2F

Teacher's Note: A convex lens gives a virtual, erect, magnified image when the object lies between focus and optical centre.

Exam Note: Object between F and O: virtual, erect, enlarged image.

Question 3. Which lens would you prefer to use while reading small letters from a dictionary?

Solution.

I would prefer convex lens because it gives the magnified image of an object when an object is placed between the optical centre and the focus. Also the magnification is more for the convex lenses having shorter focal length.

Hence for reading, a convex lens of focal length 5 cm should be used.

Teacher's Note: A convex lens used as a magnifier gives a larger virtual image; shorter focal length magnifies more.

Exam Note: Magnifier: convex lens of short focal length.

Question 4. What type of lens is an air bubble inside the water?

Solution.

When the light ray passes from a denser medium (water) to a rarer medium (air) it bends away from the normal. Thus light ray get diverge when it emerges out from the air bubble.

Thus the air bubble inside the water acts as Concave lens.

airwater

Teacher's Note: Light going from water into air bends away from the normal, so the bubble spreads parallel rays.

Exam Note: Air bubble in water acts as a diverging (concave) lens.

Question 5. A convex lens of focal length 20 cm can produce a magnified virtual as well as real image. Is this a correct statement? If yes, where shall the object be placed in each case for obtaining these images?

Solution.

Yes the above statement is correct.

A magnified virtual image can be obtained when the object is placed between optical centre and principal focus of the lens means the object is placed at distance less than 20 cm from the centre of the lens. Figure below illustrates it.

Real image of various sizes can be obtained when the object is placed beyond the principal focus.

ABA'B'OFF2F2F

Teacher's Note: A convex lens forms a magnified virtual image for objects within f, and real images beyond f.

Exam Note: Within 20 cm: virtual, magnified; beyond 20 cm: real images.

Question 6. A convex lens of focal length 20 cm can produce a magnified virtual as well as real image. Is this a correct statement? If yes, where shall the object be placed in each case for obtaining these images?

Solution.

Yes the above statement is correct.

A magnified virtual image can be obtained when the object is placed between optical centre and principal focus of the lens means within 20cm. Figure below illustrates it.

Real image of various sizes can be obtained when the object is placed beyond the principal focus.

ABA'B'OFF2F2F

Teacher's Note: Object inside the focal length gives an enlarged virtual image; beyond focus gives real images.

Exam Note: Statement correct: object within 20 cm gives virtual image.

Check Point 05

Question 1. A student uses a lens of focal length- 50 cm. What is the nature of the lens and its power?

Solution.

Since the focal length is negative, therefore the lens is concave lens because the focal length of concave lens is negative.

\( P\ (\text{in dioptre}) = \frac{1}{f\ (\text{in metres})} \)

F = -50cm = -0.5m (1m = 100cm)

\( \Rightarrow P = -\frac{1}{0.5} = -2\ \text{D} \)

Hence power of lens is -2 Dioptre.

Teacher's Note: Power of a lens is the reciprocal of its focal length in metres; negative for concave lenses.

Exam Note: P = 1/f (metres); concave lens has negative power.

Question 2. You are provided with two lenses of focal length 20 cm and 30 cm,

respectively. Which lens will you use to obtain more convergent light?

Solution.

We know that Power of lens is defined as the efficiency with which a lens can converge or diverge the light ray.

Also \( P\ (\text{in dioptre}) = \frac{1}{f\ (\text{in metres})} \)

Hence power is inversely proportional to the focal length

Therefore the lens with focal length 20cm will have more power than the lens with focal length 30cm. Therefore the lens with focal length 20cm will give more convergent light.

Teacher's Note: Power of a lens is the reciprocal of its focal length, so a shorter focal length gives more power.

Exam Note: Shorter focal length: greater power, more convergent light.

Question 3. A lens has power 4 D. Find the focal length of that lens.

Solution.

Given Power (P) = 4D

\( P\ (\text{in dioptre}) = \frac{1}{f\ (\text{in metres})} \)

\( \Rightarrow 4 = \frac{1}{f\ (\text{in metres})} \)

\( \Rightarrow f\ (\text{in metres}) = \frac{1}{4} = 0.25\ \text{m} \)

Now 1m = 100cm

⇒ 0.25m = 25cm

Hence the focal length of lens is 25cm.

Teacher's Note: Focal length is the reciprocal of power: f (in metres) = 1/P.

Exam Note: f = 1/P; P = 4 D gives f = 25 cm.

Question 4. Two lenses of power -3.5 D and + 1 D are placed in contact. Find the total power of the combination of lens. Calculate the focal length of this combination.

Solution.

Power P1 = -3.5D; P2 = +1D

Total power = P1 + P2 = -3.5D + 1D

⇒ Total power (P) = -2.5D.

Now;

\( P\ (\text{in dioptre}) = \frac{1}{f\ (\text{in metres})} \)

\( \Rightarrow -2.5 = \frac{1}{f\ (\text{in metres})} \)

\( \Rightarrow f\ (\text{in metres}) = \frac{-1}{2.5} = \frac{-1}{5/2} \)

\( \Rightarrow f\ (\text{in metres}) = -\frac{2}{5} = -0.4\ \text{m} \)

Now 1m = 100cm

⇒ -0.4m = -40cm

Hence the focal length of lens is -40cm.

Teacher's Note: Powers of lenses in contact add up; focal length follows from f = 1/P.

Exam Note: Combined power P = P₁ + P₂.

Question 5. If two lenses (convex) are in contact with each other, what happens to the ray after refraction?

Solution.

If the two lenses are kept in contact than their power is added

⇒ Power (P) = P1 + P2.

Hence the power of combination is increased which means that the converging capacity is increased. And the focal length is decreased (because focal length is inversely proportional to the power of lens).

Therefore the ray after refraction will converge at point close to lens than earlier.

Teacher's Note: Lenses in contact add their powers, so the combination is more converging with shorter focal length.

Exam Note: Convex lenses in contact: power adds, focal length decreases.

Question 6. A lens is cut into two equal halves

(i) along the principal axis

(ii) Perpendicular to principal axis. What will be the focal length of each half?

Solution.

(i) If the lens is cut along the principal axis than there will be no change in the focal length of the lens because the radius of curvature will remain the same, hence the focal length will remain unchanged.

(ii) If the lens is cut perpendicular to the principal axis than the focal length will change, it will be twice the focal length of the original lens because each half is a plano-convex lens: one surface keeps its radius of curvature and the other becomes plane, so the power becomes half.

Teacher's Note: Cutting along the axis keeps both curved surfaces; cutting across the axis leaves one curved surface, halving the power.

Exam Note: Along axis: f unchanged; perpendicular to axis: f doubles.

Chapter Exercise

Question 1. What is the radius of curvature of a plane mirror?

Solution.

A plane mirror can be considered as a spherical mirror of infinite radius of curvature where the radius is infinitely large hence the aperture is straight. Therefore the radius of curvature of a plane mirror is infinite

Teacher's Note: A plane mirror can be treated as a spherical mirror of infinite radius of curvature.

Exam Note: Plane mirror: R = infinity, f = infinity.

Question 2. What is the power of sun glasses?

Solution.

The sunglasses are not used for magnification they are used to protect our eyes from the sun rays. The sun glass is plain glass (usually with a tint or a thin polarizing film), therefore it does not have focus or the focus is at infinity.

∴ Power = \( \frac{1}{\text{focal length}} \)

Power = \( \frac{1}{\infty} = 0 \)

Hence the power of sun glasses is zero.

Teacher's Note: Plain sunglasses have flat surfaces, so their focal length is infinite and power is zero.

Exam Note: Power = 1/f; plane glass has zero power.

Question 3. What is the value of speed of light in free space?

Solution.

The refractive index of free space is 1, hence μ = 1.

\( \mu = \frac{c}{v} = 1 \)

⇒ c = v

⇒ Speed of light = c

Therefore speed of light in free space is 3×10⁸ m/s.

Teacher's Note: In free space the refractive index is 1, so light travels at c, about 3 × 10⁸ m/s.

Exam Note: Speed of light in vacuum c = 3 × 10⁸ m/s.

Question 4. For what position of an object, a concave mirror forms a real image equal in size to the object?

Solution.

When an object is kept at the centre of curvature of the concave mirror than the image formed is real, inverted and equal to the size of the object.

The figure below shows the ray diagram.

AA'PFCB, B′

Teacher's Note: At the centre of curvature a concave mirror forms a real, inverted image of the same size.

Exam Note: Object at C: image at C, real, inverted, same size.

Question 5. Does the value of speed of light change with medium?

Solution.

Yes it does change with the change in medium because different mediums have different optical densities. Some are optically denser(higher refractive index) like oil, diamond etc in which the light travels at a slower speed and bends towards the normal, whereas some other materials can be optically rarer(lower refractive index) like air, water in which light speeds up and bends away from the normal.

Teacher's Note: Light travels at different speeds in different media; speed is lower where refractive index is higher.

Exam Note: Speed of light changes with medium: v = c/μ.

Question 6. A concave mirror forms sharp image of a distant tree. What is the separation between the mirror and the screen called?

Solution.

When an object is kept at infinity or larger distances than the image is formed at the focus. Therefore the image of the distant tree will be formed at the focus of the concave mirror. So the screen will be placed at the focus to obtain the image And the distance between the mirror and the screen will be the focal length.

Figure below shows the ray diagram for the same.

FPscreenfocal length

Teacher's Note: Rays from a distant object are parallel and meet at the focus, so the screen sits at F.

Exam Note: Mirror-to-screen distance for distant object = focal length.

Question 7. Does refractive index change with color of light?

Solution.

Yes the refractive index changes with the color of the light because refractive index changes with the change in the wavelength and different colors have different wavelength. Due to it refractive index of violet color is highest and of red color is lowest.

Teacher's Note: Different colours have different wavelengths, so the refractive index varies; violet is highest, red lowest.

Exam Note: Refractive index: violet highest, red lowest.

Question 8. Magnification produced by a concave mirror of a body 4.0 cm in size is 0.16 what is the size of image?

Solution.

Given;

Magnification (m) = 0.16;

Size of object = 4cm;

Size of image =?

We know that;

\( \text{Magnification} = \frac{\text{Size of image}}{\text{Size of object}} \)

\( 0.16 = \frac{\text{Size of image}}{4} \)

⇒ Size of image = 0.16×4 = 0.64cm.

Hence size of image is 0.64cm.

Teacher's Note: Magnification is the ratio of image size to object size.

Exam Note: h' = m × h = 0.16 × 4 = 0.64 cm.

Question 9. Redraw the ray diagram given below in your answer book and complete the path of ray.

2F₁F₁OF₂2F₂

Solution.

When the ray of light passes through the focus of the convex lens it becomes parallel to the principal axis as shown in the figure below.

2F₁F₁OF₂2F₂

Teacher's Note: A ray passing through the first principal focus of a convex lens emerges parallel to the principal axis.

Exam Note: Ray through F₁ emerges parallel to the principal axis.

Question 10. The refractive index of water is 1.33 and the speed of light in air 3 × 108 ms–1. Calculate the speed of light in water.

Solution.

Given that;

Refractive index (μ) = 1.33 (taking μ = 4/3)

Speed of light in air (c) = 3 × 10⁸ m/s;

Speed of light in water =?

We know that

\( \mu = \frac{c}{v} \)

\( \frac{4}{3} = \frac{3\times10^8}{v} \)

\( \Rightarrow v = \frac{3\times3\times10^8}{4} = \frac{9\times10^8}{4} \)

⇒ v= 2.25 × 10⁸ m/s.

Hence speed of light in water is 2.25 × 10⁸ m/s.

Teacher's Note: Speed of light in a medium is v = c/μ, so light is slower in water than in air.

Exam Note: v = c/μ ≈ 2.25 × 10⁸ m/s in water.

Question 11. Draw a ray diagram to show the path of the reflected ray corresponding to an incident ray of light parallel to the principal axis of a convex mirror and show the angle of incidence and angle of reflection on it.

Solution.

A ray of light parallel to the principal axis after reflection appears to come from the focus of the convex mirror as shown in the figure below.

irFCP

Teacher's Note: A ray parallel to the axis reflects from a convex mirror as if it came from the focus.

Exam Note: Parallel ray: reflected ray appears to come from F; i = r.

Question 12. How do we say a medium to be rarer or denser? Give two reasons.

Solution.

A medium can be classified as rarer or denser by following ways.

Rarer medium has less refractive index ex-water (1.33) while denser medium has higher refractive index ex-diamond (2.42).

When light goes from rarer medium to denser medium it bends towards the normal but when light goes from denser to rarer medium it goes away from the normal.

Teacher's Note: A medium with higher refractive index is optically denser; light bends towards the normal on entering it.

Exam Note: Denser medium: higher refractive index, light slower.

Question 13. When we focus sunlight using a convex lens at the tip of a matchstick, what will happen? Why?

Solution.

The matchstick will burn because convex lens is the converging lens. The rays of sun coming from large distance ( infinity) will be converged at the focus of the convex lens, due to which too much energy will be produced and this energy will burn the matchstick kept at focus of the convex lens.

Figure below shows the ray diagram for the same.

focal pointconvex lensfocal length

Teacher's Note: A convex lens converges parallel sunlight to its focus, concentrating enough heat to burn the matchstick.

Exam Note: Convex lens focuses sunlight at F; matchstick placed at F burns.

Question 14. A dentist uses a mirror in front of a decayed tooth at a distance of 4 cm from the tooth to get four times magnified image in the mirror. Use mirror formula to find the focal length and nature of the mirror used.

Solution.

Given;

Magnification (m) = 4;

Object distance (u) = -4cm;

Image distance = v;

Magnification \( m = -\frac{v}{u} \)

\( \Rightarrow 4 = -\frac{v}{-4} \)

⇒ v = 4 × 4 = 16cm

Image distance = 16cm.

By mirror formula;

\( \frac{1}{v} + \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{16} + \frac{1}{-4} = \frac{1}{f} \)

\( \Rightarrow \frac{1-4}{16} = \frac{1}{f} \)

\( \Rightarrow -\frac{3}{16} = \frac{1}{f} \)

\( \Rightarrow f = -\frac{16}{3} = -5.33\ \text{cm} \)

Hence the focal length is -5.33cm. Since the focal length is negative therefore the mirror is concave.

Teacher's Note: A dentist's concave mirror held close to a tooth gives a magnified, erect, virtual image.

Exam Note: m = −v/u; negative focal length means concave mirror.

Question 15. A ray of light strikes the glass slab at an angle of 90°. What are the angle of incidence and the angle of refraction?

Solution.

Since the ray strikes the glass slab at an angle of 90°. Therefore

Angle of incidence = 0°.

Thus the ray of light will pass straight without any deviation as shown in the figure below.

AOBCAirGlassAirThe ray AO strikes the surface at 90°(angle of incidence = 0°)

Laws of Refraction of light;

\( \mu = \frac{\sin i}{\sin r} \)

Refractive index=1.5

Thus angle of refraction is given by

\( 1.5 = \frac{\sin 0^\circ}{\sin r} = \frac{0}{\sin r} \)

On solving, we get

\( \sin r = 0 \)

Thus the angle of refraction is 0°

Thus the refracted ray is perpendicular to the surface of the glass slab as shown in the above diagram.

Teacher's Note: A ray along the normal has zero angle of incidence and passes undeviated through the glass slab.

Exam Note: Normal incidence: i = 0°, r = 0°, no bending.

Question 16. When two or more lenses are placed in contact, what will be their combined power?

Solution.

When two or more lenses each of power P1, P2, P3, P4… Pn. are placed in contact with each other as shown in the figure below.

12

Then the combined power of the combination is the sum of all individual powers. ⇒ P = P1 + P2 + P3 + P4 + …..+ Pn

Teacher's Note: Thin lenses in contact behave as one lens whose power is the sum of the individual powers.

Exam Note: P = P₁ + P₂ + … + Pₙ

Question 17. A ray of light incident on one face of a rectangular glass slab emerges from the opposite face of the slab parallel to the direction of the incident ray. Why does it happen so?

Solution.

It happens so due to the refraction in glass Slab. The incident ray bends towards the normal as the refracted ray when it enters the glass slab, and bends away from the normal as it comes out of the slab as the emergent ray. Because of this, the emergent ray is shifted sideways from the incident ray. The displacement between emergent and incident ray is called as lateral displacement. The figure below illustrates the above situation.

irelateral displacementAirGlass slabAirIncident rayRefracted rayEmergent rayNormal

Teacher's Note: Refraction at the two parallel faces of a slab bends the ray equally and oppositely.

Exam Note: Slab: emergent ray parallel to incident ray, laterally shifted.

Question 18. A ray passing through the centre of curvature of a spherical mirror after reflection returns along the same path. Why?

Solution.

When ray of light passes through the centre of curvature of the spherical mirror it strikes along the normal, that means it is incident on the mirror perpendicularly (at 90° to the surface). Hence the incident ray coincides with the normal and retraces its path. Therefore angle of incidence = 0 so, According to law of reflection;

Angle of reflection = 0, hence the reflected ray also goes along the normal, thus ray of light retraces its path.

The figure below illustrates the above situation.

CFPPFC

Teacher's Note: A ray directed along a radius meets the mirror normally, so it reflects back along the same path.

Exam Note: Ray along normal: i = r = 0, path retraced.

Question 19. Why does a ray of light bend from its path when it travels from one medium to other?

Solution.

Bending of the light ray as it travels from one medium to another is due to the refraction of light. Refraction takes place because there is change in velocity as the light travels from one medium to another. Also the light always follows the path that takes the least time between the two given points (Fermat's principle), due to this property the light gets bend.

Teacher's Note: Light changes speed on entering another medium, so its direction changes; this bending is called refraction.

Exam Note: Refraction: bending due to change in speed of light.

Question 20. A ray of light traveling from a medium x enters obliquely into another medium Y. If it bends away from the normal, then state which one of the two is relatively optically denser. Why?

Solution.

When the ray of light travels from denser medium to the rarer medium than it bends away from the normal.

Therefore medium x is optically denser than medium y because the ray of light bends away from the normal when it travels from the medium x to medium y.

Figure below shows the situation.

irIncident rayWater (denser medium)Air (rarer medium)Refracted rayNormal

Teacher's Note: A ray bending away from the normal is passing from an optically denser to a rarer medium.

Exam Note: Away from normal: denser to rarer; towards normal: rarer to denser.

Question 21. Why is the refractive index of atmosphere different at different altitudes?

Solution.

As we move above the earth surface the density of air goes on decreasing because the amount of air present at high altitudes is less. Thus due to the decrease in the density of the air, the refractive index gradually increases from the atmosphere to the earth’s surface. Therefore the refractive index of the atmosphere is different at different altitudes.

Teacher's Note: Air becomes less dense with height, so the refractive index of the atmosphere decreases upward.

Exam Note: Higher altitude: lower air density, lower refractive index.

Question 22. For the same angle of incidence in medium P, Q and R, the angles of refraction are 45°, 35° and 15° respectively. In which medium will the velocity of light be minimum? Give reason for your answer.

Solution.

Refractive index, \( \mu = \frac{c}{v} \) ……(1)

Hence refractive index of a medium is inversely proportional to the speed of light in that medium.

Also \( \mu = \frac{\sin i}{\sin r} \) …………….. (2)

⇒ Refractive index is inversely proportional to the sine of the angle of refraction.

From (1) and (2)

Velocity of light is directly proportional to the sine of the angle of refraction.

Thus velocity of light is minimum in medium R because angle of refraction 15° is minimum.

Teacher's Note: For equal angles of incidence, the smallest angle of refraction means greatest bending and the slowest light.

Exam Note: Smallest angle of refraction: highest μ, minimum speed.

Question 23. What is meant by refractive index? If the speed of light in a medium is 2/3rd of the speed of light in vacuum, find the refractive index of that medium.

Solution.

Refractive index is the measure of bending of ray of light as it passes from one medium to another. It is also defined as the ratio of the speed of light in vacuum to the speed of light in any medium.

Refractive index \( \mu = \frac{c}{v} \)

Given

Speed of light in a medium \( v = \frac{2c}{3} \)

\( \Rightarrow \mu = \frac{c}{2c/3} \)

\( \Rightarrow \mu = \frac{3c}{2c} \)

\( \Rightarrow \mu = \frac{3}{2} = 1.5 \)

Hence Refractive index of medium is 1.5.

Teacher's Note: Refractive index is c/v; if v = 2c/3, then μ = 3/2.

Exam Note: μ = c/v = 3/2 = 1.5.

Question 24. The radius of curvature of a concave mirror is 50 cm. Where should an object be placed in the mirror, so as to form its image at infinity? Justify your answer.

Solution.

Given;

Radius of Curvature(R) = 50cm;

R = 2f

⇒ 50 = 2f

\( \Rightarrow f = \frac{50}{2} = 25\ \text{cm} \)

Focal length = 25cm.

When an object is kept at the focus of the concave mirror then the image is formed at infinity.

This can be shown as below:

The Mirror formula is given by:

\( \frac{1}{F} = \frac{1}{v} + \frac{1}{u} \)

Where, F is the focal length of the mirror

v is the image distance from the pole of the mirror

u is the object distance from the pole of the mirror

On solving for v, we get

\( \frac{1}{v} = \frac{1}{F} - \frac{1}{u} \)

If F=u=25 cm, we get

\( \frac{1}{v} = 0 \text{ or } v = \frac{1}{0} = \infty \)

Therefore the object should be placed at 25cm from the pole of the concave mirror to get an image at infinity.

Teacher's Note: A concave mirror forms the image at infinity when the object is at its focus; R = 2f.

Exam Note: Image at infinity: object at focus; f = R/2 = 25 cm.

Question 25. Draw the ray diagram in your answer book and show the formation of image of object AB with suitable rays. Mention the position and nature of image.

BACF

Solution.

The mirror is the concave mirror and the object is kept between Centre of curvature and focus.

Thus the real, inverted and enlarged image will be formed beyond the center of curvature. Below is the ray diagram for it.

ABA'B'PFC

Teacher's Note: For an object between C and F of a concave mirror, the image is real, inverted, enlarged and beyond C.

Exam Note: Object between C and F: image beyond C, enlarged, real.

Question 26. How far should an object be placed from a convex lens of focal length 20 cm to obtain its image at a distance of 30 cm from the lens? What will be the height of the image, if the objects is 6 cm tall?

Solution.

According to the question;

Object distance = u;

Image distance (v) = 30cm;

Focal length = 20cm

By lens formula;

\( \frac{1}{v} - \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{30} - \frac{1}{u} = \frac{1}{20} \)

\( \Rightarrow \frac{1}{u} = \frac{1}{30} - \frac{1}{20} \)

\( \Rightarrow \frac{1}{u} = \frac{20-30}{600} = \frac{-10}{600} \)

\( \Rightarrow \frac{1}{u} = \frac{-1}{60} \)

⇒ u = -60cm.

Therefore object is placed at 60 cm in front of lens.

Now;

Height of object h1= 6cm;

Magnification \( m = \frac{h_2}{h_1} = \frac{v}{u} \)

Putting values of v and u

\( \frac{h_2}{6} = \frac{30}{-60} \)

\( \Rightarrow \frac{h_2}{6} = -\frac{1}{2} \)

\( \Rightarrow h_2 = -\frac{6}{2} = -3 \)

Height of image is 3 cm.

Negative sign means image is real and inverted.

Teacher's Note: Use 1/v − 1/u = 1/f for position and m = v/u = h₂/h₁ for image height.

Exam Note: u = −60 cm; image 3 cm tall, real, inverted.

Question 27. An object of size 7.0 cm is placed at a distance of 27 cm in front of concave mirror of focal length 18 cm. At what distance from the mirror should a screen be placed so that a sharply focused image can be obtained? Find the size and the nature of the image.

Solution.

According to the question;

Object distance (u) = -27cm;

Focal length (f) = -18cm;

Image distance = v;

By mirror formula;

\( \frac{1}{v} + \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{v} + \frac{1}{-27} = \frac{1}{-18} \)

\( \Rightarrow \frac{1}{v} = \frac{1}{27} - \frac{1}{18} \)

\( \Rightarrow \frac{1}{v} = \frac{-3+2}{54} \)

\( \Rightarrow \frac{1}{v} = -\frac{1}{54} \)

⇒ v = -54cm.

Thus, screen should be placed 54cm in front of the mirror to obtain the sharp focused image.

Height of object h1= 7cm;

Magnification \( m = \frac{h_2}{h_1} = -\frac{v}{u} \)

Putting values of v and u

\( \frac{h_2}{7} = -\frac{-54}{-27} \)

\( \Rightarrow \frac{h_2}{7} = -2 \)

⇒ h2 = 7 × -2 = -14.

Height of image is 14 cm.

Negative sign means image is real and inverted.

Thus real, inverted image of 14cm size is formed.

Teacher's Note: Use the mirror formula for image distance and m = −v/u for image size; real image forms on a screen.

Exam Note: v = −54 cm; image 14 cm, real, inverted, enlarged.

Question 28. A 5.0 cm tall object is placed perpendicular to the principal axis of a convex lens of focal length 20 cm. The distance of the object from the lens is 30 cm By calculation determine

(i) The position and

(ii) The size of the image formed.

Solution.

According to the question;

Object distance = -30 cm;

Image distance = v cm;

Focal length = 20 cm

By lens formula;

\( \frac{1}{v} - \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{v} - \frac{1}{-30} = \frac{1}{20} \)

\( \Rightarrow \frac{1}{v} = \frac{1}{20} - \frac{1}{30} \)

\( \Rightarrow \frac{1}{v} = \frac{30-20}{600} = \frac{10}{600} \)

\( \Rightarrow \frac{1}{v} = \frac{1}{60} \)

⇒ v = 60cm.

Therefore image is formed at 60 cm in right of lens. Now;

Height of object h1= 5cm;

Magnification \( m = \frac{h_2}{h_1} = \frac{v}{u} \)

Putting values of v and u

\( \frac{h_2}{5} = \frac{60}{-30} \)

\( \Rightarrow \frac{h_2}{5} = -2 \)

⇒ h2 =-2 ×5=-10 cm

Height of image is 10 cm.

Negative sign means image is real and inverted.

Teacher's Note: Convex lens with object between f and 2f gives a real, inverted, enlarged image beyond 2f.

Exam Note: v = 60 cm; image 10 cm, real, inverted.

Question 29. An object placed 45 cm from a lens forms an image on a screen place 90 cm on the other side of the lens. Identify the type of the lens and find its focal length.

Solution.

According to the question;

Object distance, u= -45cm;

Image distance, v= 90 cm;

Focal length, f=?

By lens formula;

\( \frac{1}{v} - \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{90} - \frac{1}{-45} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{f} = \frac{1}{90} + \frac{1}{45} \)

\( \Rightarrow \frac{1}{f} = \frac{1+2}{90} = \frac{3}{90} \)

\( \Rightarrow f = \frac{90}{3} \)

⇒ f = 30cm.

Since the focal length is positive, therefore the lens is convex lens of focal length 30cm.

Teacher's Note: A real image on a screen means a convex lens; its focal length follows from the lens formula.

Exam Note: Positive focal length: convex lens, f = 30 cm.

Question 30. Does the incident and emergent ray coincide in the process of refraction through glass slab? Give reason.

Solution.

The incident ray and the emergent ray do not coincide they are parallel to each other. The emergent ray is shifted by some distance from the incident ray while passing through the glass slab which is called the lateral displacement.

The figure below illustrates it.

irelateral displacementAIRGlass slabAirIncident rayRefracted rayEmergent rayNormalOB

Teacher's Note: In a glass slab the emergent ray is parallel to the incident ray but shifted sideways.

Exam Note: Emergent ray parallel, not coincident; lateral displacement.

Question 31. A ray of light enters a diamond from air. If the refractive index of diamond is 2.42, what % (percentage) is speed of light in diamond with that of speed in air?

Solution.

Refractive index \( \mu = \frac{c\ (\text{speed of light in vacuum})}{v\ (\text{speed of light in any medium})} \)

Given μ = 2.42, c = 3 × 10⁸ m/s.

Putting the value in the above formula, we get

\( 2.42 = \frac{3\times10^8}{v} \)

\( \Rightarrow v = \frac{3\times10^8}{2.42} \)

⇒ v = 1.24 × 10⁸ m/s.

Speed of light in diamond is 1.24 × 10⁸ m/s

\( \% \text{ of speed in diamond} = \frac{1.24\times10^8}{3\times10^8}\times100 = 0.41\times100 \approx 41\% \)

Thus the speed of light in diamond is about 41% of its speed in air (a decrease of about 59%).

Teacher's Note: Speed in a medium is c/μ; for diamond it is about 41% of the speed in air.

Exam Note: Diamond: v = c/2.42, about 41% of c.

Question 32. The image of an object place at 60 cm in front of a lens is obtained on a screen at a distance of 120 cm from it. Find the focal length of the lens. What would be the lens? What would be the height of the image? If the object is 5 cm high?

Solution.

According to the question;

Object distance (u) = -60cm;

Image distance (v) = 120cm;

Focal length = f

By lens formula;

\( \frac{1}{v} - \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{120} - \frac{1}{-60} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{f} = \frac{1}{120} + \frac{1}{60} \)

\( \Rightarrow \frac{1}{f} = \frac{1+2}{120} = \frac{3}{120} \)

\( \Rightarrow f = \frac{120}{3} \)

⇒ f = 40cm.

Therefore Focal length of lens is 40 cm.

Since the focal length is positive. Therefore the lens is convex lens of focal length 40cm. Now;

Height of object h1= 5cm;

Magnification \( m = \frac{h_2}{h_1} = \frac{v}{u} \)

Putting values of v and u

\( \frac{h_2}{5} = \frac{120}{-60} \)

\( \Rightarrow \frac{h_2}{5} = -2 \)

⇒ h2 = -2 × 5= -10 cm

Height of image is 10 cm.

Negative sign means image is real and inverted.

Teacher's Note: Real image on a screen shows a convex lens; the image is twice the object size.

Exam Note: f = 40 cm; image 10 cm, real, inverted.

Question 33. A. Two lenses have power of (a) + 2D (b) – 4D. What is the nature and focal length of each lens?

Solution.

Power P1 = 2D;

Since Power is positive. Therefore, the lens is convex lens.

\( \text{Power} = \frac{1}{\text{focal length (in metres)}} \)

\( 2 = \frac{1}{f} \)

\( \Rightarrow f = \frac{1}{2} = 0.5\ \text{m} \)

1m = 100cm

⇒ 0.5m = 50cm.

Hence the focal length is 50cm

P2 = -4D.

Since the power is negative. Therefore, the lens is concave lens.

\( \text{Power} = \frac{1}{\text{focal length (in metres)}} \)

\( -4 = \frac{1}{f} \)

\( \Rightarrow f = \frac{1}{-4} = -0.25\ \text{m} \)

1m = 100cm

⇒ -0.25m = -25cm.

Hence the focal length is -25cm

Teacher's Note: Positive power indicates a convex lens and negative power a concave lens; f = 1/P.

Exam Note: +2 D: convex, 50 cm; −4 D: concave, −25 cm.

Question 33. B. An object is kept at a distance of 100 cm from each of the above lenses. Calculate the

(a) image distance and

(b) magnification in each of two cases.

Solution.

(a) Given

Object distance (u) = -100cm

Focal length (f) = 50cm

Image distance = v

By lens formula;

\( \frac{1}{v} - \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{v} - \frac{1}{-100} = \frac{1}{50} \)

\( \Rightarrow \frac{1}{v} = \frac{1}{50} - \frac{1}{100} \)

\( \Rightarrow \frac{1}{v} = \frac{2-1}{100} = \frac{1}{100} \)

⇒ v=100cm

Hence the image is formed at 100 cm behind the lens.

Object distance (u) = -100cm

Focal length (f) = -25cm

Image distance = v

By lens formula;

\( \frac{1}{v} - \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{v} - \frac{1}{-100} = \frac{-1}{25} \)

\( \Rightarrow \frac{1}{v} = \frac{-1}{25} - \frac{1}{100} \)

\( \Rightarrow \frac{1}{v} = \frac{-4-1}{100} = \frac{-5}{100} \)

\( \Rightarrow v = -\frac{100}{5} \)

⇒ v= -20cm

Hence the image is formed at 20cm in front of the lens.

(b) For 1st case

Object distance (u) = -100cm

Image distance (v) = 100cm.

By Magnification Formula

Magnification \( m = \frac{v}{u} \)

\( \Rightarrow \text{Magnification} = \frac{100}{-100} = -1 \)

Therefore, Magnification for the 1st case is -1. The negative sign means the image is real and inverted.

For 2nd case

Object distance (u) = -100cm

Image distance (v) = -20cm.

By Magnification Formula

Magnification \( m = \frac{v}{u} \)

\( \Rightarrow \text{Magnification} = \frac{-20}{-100} = \frac{1}{5} = 0.2 \)

Therefore, Magnification for 2nd case is 0.2. The positive sign means the image is erect and virtual.

Teacher's Note: Use the lens formula 1/v − 1/u = 1/f for image distance and m = v/u for magnification.

Exam Note: Convex: m = −1 (real); concave: m = 0.2 (virtual).

Question 34. List the sign conventions for reflection of light by spherical mirror. Draw a diagram and apply these conventions in the determination of focal length of a spherical mirror which forms three times magnified real image of an object placed. 16 cm in front of it.

Solution.

Pole (P) of the mirror is taken as the origin and the Principal axis is taken as the horizontal X- axis. The sign conventions are as follows:

The object is always placed on the left side of the mirror.

All the distances measured to the right side of the origin are taken as positive, while the distances measured to the left side of the origin are taken as negative.

The object distance is always negative.

All the distances parallel to the principal axis of the mirror are measured from the pole of the mirror.

Distances measured vertically upwards from the principal axis of the mirror are taken as positive.

Distances measured vertically downwards from the principal axis of the mirror are taken as negative.

The focal length of Concave mirror is negative while that of convex mirror is positive. The figure below illustrates the conventions used.

Incident lightHeight upwards (Positive)Height downwards (Negative)Object on leftDistance against incident light (Negative)Distance alongincident light(Positive)

Given;

Magnification (m) = -3 (real image is inverted always). Object distance (u) = -16cm.

Ray diagram can be shown as below

ABA'B'PFCu = 16 cmf = 12 cm

By Magnification Formula;

Magnification \( m = -\frac{v}{u} \)

Where,

v is the image distance

u is the object distance

\( -3 = -\frac{v}{-16} \)

⇒ v = -3 × 16 = -48cm.

∴ Image distance (v) = -48cm.

By mirror formula;

\( \frac{1}{v} + \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{-48} + \frac{1}{-16} = \frac{1}{f} \)

\( \Rightarrow f = \frac{-48}{4} = -12 \)

Therefore the focal length is -12 cm. Since the focal length is negative, therefore the mirror is concave mirror.

Teacher's Note: Real image is inverted, so m is negative; the mirror formula with u = −16 cm gives f.

Exam Note: m = −3, v = −48 cm, f = −12 cm: concave.

Question 35. List the new Cartesian sign convention for reflection of light by spherical mirrors. Draw a diagram and apply these conventions for calculating the focal length and nature of a spherical mirror which forms 1/3 times magnified virtual image of an object placed 18 cm if front of it.

Solution.

According to the new Cartesian system the Pole (P) of the mirror is taken as the origin and the Principal axis is taken as the horizontal X- axis. The sign conventions for it are as follows:

The object is always placed on the left side of the mirror.

All the distances measured to the right side of the origin are taken as positive, while the distances measured to the left side of the origin are taken as negative.

All the distances parallel to the principal axis of the mirror are measured from the pole of the mirror.

Distances measured vertically upwards from the principal axis of the mirror are taken as positive.

Distances measured vertically downwards from the principal axis of the mirror are taken as negative.

The focal length of Concave mirror is negative while that of convex mirror is positive. The figure below illustrates the conventions used.

Direction of incident lightHeight upwards (+ve)Height downwards (−ve)Distance towards the left (−ve)Distance towards the right (+ve)PPrincipal axisMirror

Given;

Magnification \( m = \frac{1}{3} \) (virtual image is always erect). Object distance (u) = -18cm.

By Magnification Formula;

Magnification \( m = -\frac{v}{u} \)

Where,

v is the image distance

u is the object distance

\( \frac{1}{3} = -\frac{v}{-18} \)

\( \Rightarrow v = \frac{18}{3} = 6 \)

⇒ v= 6cm.

∴ Image distance (v) = 6cm.

By mirror formula;

\( \frac{1}{v} + \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{6} + \frac{1}{-18} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{6} - \frac{1}{18} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{f} = \frac{3-1}{18} = \frac{2}{18} \)

\( \Rightarrow f = \frac{18}{2} = 9\ \text{cm} \)

Therefore, the focal length is 9 cm. Since the focal length is positive, therefore the mirror is convex mirror.

Figure below shows the ray diagram for the same.

BAB'A'PFC18 cm6 cm9 cm

Teacher's Note: A virtual image is always erect, so m is positive; a positive focal length means a convex mirror.

Exam Note: f = +9 cm (positive): convex mirror.

Question 36. A. State and define the SI unit of power of a lens.

Solution.

The reciprocal of focal length of the lens is called the power of the lens (P).

\( P\ (\text{in dioptre}) = \frac{1}{f\ (\text{in metres})} \)

The S.I unit of power of lens is diopter denoted by D.

From the formula of power of lens.

\( 1\ \text{D} = \frac{1}{1\ \text{m}} = 1\ \text{m}^{-1} \)

Thus 1 Dioptre is the power of the convex lens having focal length of 1m.

Teacher's Note: Power is the reciprocal of focal length; its SI unit is the dioptre (D = m⁻¹).

Exam Note: 1 dioptre = power of a lens of focal length 1 m.

Question 36. B. A convex lens of focal length 25 cm and a concave lens of focal length 10 cm are placed in close contact with each other. Calculate the lens power of this combination.

Solution.

Given

f1 = 25cm (Focal length of convex lens is positive)

⇒ f1 = 0.25m (1m = 100cm)

\( P\ (\text{in dioptre}) = \frac{1}{f\ (\text{in metres})} \)

⇒ Power of convex lens, (F=25 cm) \( P_1 = \frac{1}{0.25} = \frac{1}{1/4} \)

∴ P1 = 4D.

f2 = -10cm (Focal length of concave lens is negative)

⇒ f2 = -0.1m (1m = 100cm)

⇒ Power of the concave lens (F=10 cm), \( P_2 = \frac{1}{-0.1} = \frac{1}{-1/10} \)

∴ P2 = -10D.

Power of combination = P1 + P2.

P = 4D – 10D = -6D.

Lens power of the combination is -6D. Since it is negative therefore the new lens will behave like concave lens having a focal length f = 1/P = 1/(−6) m ≈ −0.167 m ≈ −16.7 cm, i.e. a focal length of about 16.7 cm.

Teacher's Note: Add the powers of the two lenses; negative total power means the combination acts as a concave lens.

Exam Note: Combination −6 D: concave, f ≈ −16.7 cm.

Question 37. List the sign conventions that are followed in case of refraction of light through spherical lenses. Draw a diagram and apply these conventions in

determining the nature and focal length of a spherical lens which forms three times magnified real image of an object placed 16 cm from the lens.

Solution.

Sign convention for the refraction of light is as follows.

1. All the distances are measured from the optical centre of the lens.

2. All the distances which are measured in the same direction of the incident light ray (right hand side of lens) will be taken as positive.

3. All the distances which are measured against the direction of incident light (left hand side) are taken as negative.

4. The perpendicular distances to principal axis in upward direction will be positive and those in downward direction will be taken as negative.

Figure below illustrates the conventions more clearly.

Direction of incident ray (+v)2F₁F₁F₂2F₂OUpward height (+ve)Downward height (−ve)Negative distancePositive distance

According to the question.

Magnification (m) = -3 (real image is always inverted).

Object distance (u) = -16cm.

By Magnification Formula;

Magnification \( m = \frac{v}{u} \)

Where,

v is the image distance,

u is the object distance

\( -3 = \frac{v}{-16} \)

⇒ v= -16 × -3

⇒ v= 48cm.

∴ Image distance (v) = 48cm.

By lens formula;

\( \frac{1}{v} - \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{48} - \frac{1}{-16} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{f} = \frac{1}{48} + \frac{1}{16} \)

\( \Rightarrow \frac{1}{f} = \frac{1+3}{48} = \frac{4}{48} \)

\( \Rightarrow f = \frac{48}{4} = 12 \)

Therefore the focal length is 12 cm. Since the focal length is positive, therefore the lens is convex lens.

Figure below shows the ray diagram for the same.

BAB'A'OFF2F2F16 cm12 cm48 cm

Teacher's Note: Real images are inverted so m is negative; the lens formula then gives a positive focal length.

Exam Note: v = 48 cm, f = +12 cm: convex lens.

Question 38. A. State the laws of refraction of light. Write an expression to relate

absolute refractive index of a medium with speed of light in vacuum.

Solution.

The refraction of light occurs according to the following laws which are as follows.

1. The incident ray, the refracted ray, and the normal to the surface separating two media at the point of incidence all lie in the same plane.

2. The ratio of sine of angle of incidence and sine of angle of refraction remains constant ( \( \frac{\sin i}{\sin r} \) = constant) subject to certain conditions. This law is called Snell’s law of refraction.

θ₁θ₂n₂n₁Snell's Law:n₁ sin θ₁ = n₂ sin θ₂

Refractive index of a medium \( \mu = \frac{\text{Speed of light in vacuum } (c)}{\text{Speed of light in the medium } (v)} \)

\( \Rightarrow \mu = \frac{c}{v} \)

Teacher's Note: Refraction follows two laws, including Snell's law sin i / sin r = constant; and μ = c/v.

Exam Note: Snell's law: sin i / sin r = constant; μ = c/v.

Question 38. B. The refractive index of a medium x with respect to y is 2/3 and the refractive index of medium y with respect to z is 4/3 Calculate the refractive index of medium z with respect to medium x

Solution.

Refractive index of air, μair = 1;

Given;

Refractive index of medium x w.r.t medium y, \( \mu_{xy} = \frac{2}{3} \)

Refractive index of medium y w.r.t medium z, \( \mu_{yz} = \frac{4}{3} \)

Refractive index of medium z w.r.t medium x = \( \mu_{zx} = \frac{\mu_z}{\mu_x} = \frac{\mu_z}{\mu_y} \times \frac{\mu_y}{\mu_x} \)

\( \Rightarrow \mu_{zx} = \frac{1}{\mu_y/\mu_z} \times \frac{1}{\mu_x/\mu_y} \)

\( \Rightarrow \mu_{zx} = \frac{1}{\mu_{yz}} \times \frac{1}{\mu_{xy}} \)

\( \Rightarrow \mu_{zx} = \frac{1}{4/3} \times \frac{1}{2/3} \)

\( \Rightarrow \mu_{zx} = \frac{3}{4} \times \frac{3}{2} \)

\( \Rightarrow \mu_{zx} = \frac{9}{8} \)

∴ Refractive index of medium z w.r.t medium x is 9/8.

Teacher's Note: μzx = 1/(μxy × μyz), since relative indices multiply along the chain.

Exam Note: μzx = 1/(2/3 × 4/3) = 9/8.

Question 39. Varun’s mom is finding it difficult to cook in the kitchen as there was power cut and she was complaining about it to Varun. He immediately took a plane mirror from his shelf made it stand against a wall such that sun’s rays were focused into the kitchen directly on the cook top, due to the reflection of the mirror. There was some light now and his mother was able to finish her work.

(i) What are the characteristic of the image formed by a plane mirror?

(ii) What values did Varun display?

Solution.

(i) Image formed by plane mirror is of the same size as of the object.

Positive value of magnification indicates that image formed by plane mirror is erect. Image formed by plane mirror is at same distance as the object but behind the mirror. Magnification of image is +1.

The image is virtual.

(ii) Varun made an arrangement for the light so that his mother could finish the work easily this shows that Varun is caring and responsible towards his mother. Also, he has used his knowledge of plane mirrors to get the light this shows that he is also quite clever and intelligent also he is the serious student who focuses on the practical aspect of things taught in class and applies them in a day to day use.

In other words, Varun had put the science to the real use.

Teacher's Note: A plane mirror forms a virtual, erect, same-sized image as far behind it as the object is in front.

Exam Note: Plane mirror: virtual, erect, same size, m = +1.

Question 40. Mr. Raghav, grade 6 teacher find that his students do not draw when he draws on the board. Every time he had to turn towards them to see whether they draw and label the diagrams. Arav, one of his student fixed two big convex mirrors at the two sides of the black board. With this Mr. Raghav was able to draw and also supervise his students through the mirror. All the students started doing their work property.

(i) Which characteristics of convex mirror, let Mr. Raghav to do both his job at the same time?

(ii) What value did Arav and Mr. Raghav show?

Solution.

(i) The convex mirrors are diverging in nature and they have the wide field of view due to which we can see the image of large area in the mirror. The light rays incident on it gets diverged following the laws of reflection, the reflected rays forms the wider path as shown in the figure below.

EyeConvex mirrorWide field of view

(ii) Mr. Raghav every time look to see whether students are drawing the diagram or not this shows that he is a responsible and caring teacher who does his job passionately. Arav puts two convex mirrors so that Mr. Raghav will not have to turn every time this shows that Arav is helpful, caring and respectful towards his teacher. Also he had used the property of convex mirrors thus he is quite intelligent and serious student who puts the practical use of concepts in day to day life use.

Teacher's Note: A convex mirror diverges light and so shows a wide field of view in a small mirror.

Exam Note: Convex mirror: wide field of view; values: responsibility, helpfulness.

Challengers

Question 1. A virtual image three times the size of the object is obtained with a concave mirror of radius of curvature 36 cm. The distance of the object from the mirror is

A. 20cm

B. 10cm

C. 12cm

D. 5cm

Solution.

Given:

Magnification (m) = 3 (virtual image is erect).

Radius of the curvature, R =36 cm

Focal Length (f) = \( \frac{R}{2} \) = \( \frac{36}{2} \) = -18cm (Negative for concave mirror).

Now by formula,

\( m = -\frac{v}{u} \)

1. Magnification,

Where,

v is the image distance,

u is the object distance,

Putting the values in the above formula, we get

\( 3 = -\frac{v}{u} \text{ or } v = -3u \)

2. Mirror formula

\( \frac{1}{f} = \frac{1}{v} + \frac{1}{u} \)

Where f is the focal length of the mirror v is the image distance from the mirror u is the object distance from the mirror Thus, putting the values in the equation, we get

\( \frac{-1}{18} = \frac{-1}{3u} + \frac{1}{u} = \frac{2}{3u} \)

\( \frac{-1}{36} = \frac{1}{3u} \)

Thus, on solving the above equation, we get

u=-12 cm

Hence the distance of the object from the mirror is 12 cm. Therefore the option C is correct.

Teacher's Note: Virtual image 3 times larger: m = 3, v = −3u; the mirror formula gives u.

Exam Note: f = R/2 = −18 cm; u = −12 cm, option C.

Question 2. A convex mirror of focal length f forms an image \( \frac{1}{n} \) times the size of the object. The distance of the object from the mirror is

A. \( \frac{n+1}{n}f \)

B. \( (n+1)f \)

C. \( (n-1)f \)

D. \( \frac{n-1}{n}f \)

Solution.

According to the question

Magnification \( m = \frac{1}{n} \) (image is \( \frac{1}{n} \) of the size of object).

Focal length = f (positive for convex mirror).

Object distance = -u.

Now By formula.

\( m = \frac{f}{f-(-u)} = \frac{f}{f+u} \)

\( \Rightarrow \frac{1}{n} = \frac{f}{f+u} \)

⇒ f + u = nf

⇒ u = nf – f

⇒ u = (n-1)f.

Therefore the object distance from the mirror is (n-1) f. Hence the option C is correct.

Teacher's Note: For a convex mirror, magnification m = f/(f − u); setting m = 1/n gives the object distance.

Exam Note: Object distance = (n − 1)f; option C.

Question 3. A perfectly reflecting mirror has an area of 1cm². Light energy is allowed to fall on it for an hour at the rate of 10 Wcm⁻². The force that acts on the mirror is

A. 3.35×10⁻⁷N

B. 6.7×10⁻⁷N

C. 3.35×10⁻⁸N

D. 6.7×10⁻⁸N

Solution.

Given: -

Area of the mirror = 1 cm²,

Power transmitted to the mirror = 10 Wcm⁻²,

Calculations: -

The average force is given by \( F = \frac{\Delta p}{\Delta t} \)

Since the surface is perfectly reflecting we can write \( \Delta p = \frac{2\,\Delta E}{c} \)

So \( F = 2\left(\frac{\Delta E}{c\,\Delta t}\right) = 2\,\frac{P}{c} \)

\( = 2 \times \frac{10\times10^{4}\times1\times10^{-4}}{3\times10^{8}} \)

\( = \frac{20}{3}\times10^{-8}\ \text{N} \)

= 6.7×10⁻⁸ N

Hence the option D is correct.

Teacher's Note: Light carries momentum; on a perfectly reflecting surface the force is F = 2P/c.

Exam Note: F = 2 × power / c = 6.7 × 10⁻⁸ N.

Question 4. An object is placed at the centre of curvature of a concave mirror. The distance between its image and the pole is

A. equal to f

B. between f and 2f

C. equal to 2f

D. greater than 2f

Solution.

When an object is placed at centre of curvature of concave mirror than the real, inverted image of size same as that of object is formed at the center of curvature. Therefore the image distance = Centre of curvature = 2f. Hence the correct option is C

AA'PFCB, B′

Teacher's Note: An object at the centre of curvature gives a real, inverted image of equal size at C.

Exam Note: Object at C: image at C = 2f; option C.

Question 5. The refractive index of lens flint glass is 1.65 and for alcohol, it is 1.36 with respect to air, then the refractive index of the dense flint glass with respect to alcohol is

A. 1.31

B. 1.21

C. 1.11

D. 1.01

Solution.

Refractive index of air, μair = 1;

Given;

Refractive index of flint glass w.r.t air, \( {}_{air}\mu_{glass} = 1.65 \)

Refractive index of alcohol w.r.t air, \( {}_{air}\mu_{alcohol} = 1.36 \)

Refractive index of flint glass w.r.t alcohol = \( {}_{alcohol}\mu_{glass} = \frac{{}_{air}\mu_{glass}}{{}_{air}\mu_{alcohol}} = \frac{1.65}{1.36} \)

⇒ alcoholμglass = 1.213

Hence the refractive index of flint glass w.r.t alcohol is 1.213. Therefore the option B is correct.

Teacher's Note: Refractive index of one medium relative to another is the ratio of their absolute refractive indices.

Exam Note: 1.65 / 1.36 = 1.21; option B.

Question 6. Refractive index of diamond with respect to glass is 1.6. If the absolute refractive index of glass is 1.5, then the absolute refractive index of diamond is

A. 1.4

B. 2.4

C. 3.4

D. 4.4

Solution.

Absolute refractive index of glass = \( \frac{\mu_{glass}}{\mu_{air}} = 1.5 \)

Refractive index of diamond w.r.t glass is

\( \frac{\mu_{diamond}}{\mu_{glass}} = 1.6 \)

⇒ μdiamond = 1.6 × μglass

⇒ μdiamond = 1.6 × 1.5 (μglass = 1.5).

⇒ μdiamond = 2.4

Hence the absolute refractive index of diamond is 2.4. Therefore the option B is correct.

Teacher's Note: Absolute refractive index of diamond equals its index relative to glass times that of glass.

Exam Note: μ(diamond) = 1.6 × 1.5 = 2.4; option B.

Question 7. A ray of light from a denser medium strikes a rarer medium at an angle of incidence i as shown in figure. The reflected and refracted rays make an angle of 90° with each other. The angles of reflection and refraction are r and r′. The critical angle is

DenserRarerNN′irr′ACDB

A. sin⁻¹ (tan r)

B. sin⁻¹ (tan i)

C. sin⁻¹ (tan r′)

D. tan⁻¹ (tan i)

Solution.

The reflected and refracted rays are at 90° to each other, so r + r′ = 90° (angles measured from the normal), i.e. r′ = 90° − r. Also the angle of reflection equals the angle of incidence, i = r.

According to Snell’s law for light going from the denser to the rarer medium, \( \frac{\sin i}{\sin r'} = \frac{1}{\mu} \), where μ is the refractive index of the denser medium with respect to the rarer medium.

\( \Rightarrow \frac{1}{\mu} = \frac{\sin r}{\sin (90^\circ - r)} = \frac{\sin r}{\cos r} = \tan r \)

For the critical angle \( i_c \), \( \sin i_c = \frac{1}{\mu} \)

\( \Rightarrow \sin i_c = \tan r \)

\( \Rightarrow i_c = \sin^{-1}(\tan r) \)

Therefore, the critical angle ic = sin⁻¹(tan r)

Hence the option A is correct.

Teacher's Note: Critical angle ic satisfies sin ic = 1/μ; with reflected and refracted rays at 90°, sin ic = tan r.

Exam Note: sin ic = tan r, so option A.

Question 8. A convex lens A of focal length 20 cm and a concave lens B of focal length 5 cm are kept along the same axis with a distance d between them. If a parallel beam of light falling on A leaves B as a parallel beam, then the distance d in cm will be

A. 25

B. 15

C. 30

D. 50

Solution.

According to the question following is the ray diagram.

IABd5 cm20 cm

As the incident ray is parallel to the principal axis. Therefore in absence of concave lens it will form an image at focus of convex lens.

∴ v = 20cm = f

Distance of Image I from the concave lens B will be = u = 20 – d

Now, the image I will act as object for the concave lens.

Since image object (image I) is at focus of concave lens. Therefore, Image will be formed at infinity

\( \Rightarrow v = \infty \)

Focal length = -5cm.

By Lens Formula.

\( \frac{1}{v} - \frac{1}{u} = \frac{1}{f} \)

\( \Rightarrow \frac{1}{\infty} - \frac{1}{20-d} = \frac{1}{-5} \)

\( \Rightarrow 0 - \frac{1}{20-d} = \frac{1}{-5} \)

\( \Rightarrow \frac{1}{20-d} = \frac{1}{5} \)

⇒ 20 – d = 5

⇒ d = 20 – 5 = 15cm.

Therefore, the distance d will be 15cm. Hence the option B is correct.

Teacher's Note: A parallel beam leaves the concave lens parallel only if the convex lens's focus coincides with the concave lens's focus.

Exam Note: d = f₁ − |f₂| = 20 − 5 = 15 cm.

Question 9. A thick plane-convex lens made of crown glass (refractive index 1.5) has thickness of 3 cm at its centre. The radius of curvature of the spherical surface is 5 cm.

POplane facecurved face

An ink mark made at the centre of its plane face, when viewed normal through the curved face, appears to be at a distance x from the curved face. Then, x is equal to

A. 2cm

B. 2.1cm

C. 2.3cm

D. 2.5cm

Solution.

Given:

Radius of curvature, R=-5 cm

Object distance, u=-3 cm

The refractive indices n1=1.5 (glass), n2=1.0(air)

We have, \( \frac{n_2}{v} - \frac{n_1}{u} = \frac{n_2 - n_1}{R} \) (refraction at a spherical surface)

\( \frac{1}{v} - \frac{1.5}{-3} = \frac{1-1.5}{-5} \)

\( \frac{1}{v} = \frac{0.5}{5} - \frac{1.5}{3} = -\frac{2}{5} \)

v= -2.5 cm

Then the image will appear at a distance of 2.5 cm from the curved surface of the lens. Hence D is the correct option.

Teacher's Note: Apparent depth of an object under a curved glass surface follows n₂/v − n₁/u = (n₂ − n₁)/R.

Exam Note: v = −2.5 cm, so x = 2.5 cm; option D.

Question 10. An object is placed in front of a screen and a convex lens is placed at a position such that the size of the image formed is 9cm. when the lens is shifted through a distance of 20 cm, the size of the image becomes 1 cm. The focal length of the lens and the size of the object are respectively.

A. 7.5 cm and 3.5 cm

B. 7.5 cm and 4.5 cm

C. 6 cm and 3 cm

D. 7.5 cm and 3 cm

Solution.

If h1 and h2 are the sizes of the images formed in two conjugate positions, then, the size of object is given as h = √(h1h2) = √(9×1) = 3cm.

The sizes of the image in the two conjugate positions are 9 cm and 1 cm.

In the first case, the magnification is given as

\( m = \frac{v}{u} = \frac{9}{3} \)

Such that, v = 3u

Also, v = 20+u, since “v” and “u” interchange in the conjugate positions.

∴ 3u = 20 + u

Or 2u = 20

Or u = 10

And, v = 20+ u = 20+10 = 30 cm

Now, focal length is calculated as:

\( \frac{1}{f} = \frac{1}{v} + \frac{1}{u} \)

\( = \frac{1}{30} + \frac{1}{10} \)

\( = \frac{10+30}{300} \)

\( \frac{1}{f} = \frac{40}{300} \Rightarrow f = 7.5\ \text{cm} \)

Thus, correct answer is option (D)

Teacher's Note: Displacement method: object size = √(h₁h₂), and v − u = shift of the lens.

Exam Note: h = √(h₁h₂) = 3 cm; f = 7.5 cm; option D.

Download All In One Solutions for Class 10 Math PDF

Access Class 10 Mathematics Solutions

Review detailed solutions for Class 10 Mathematics. The All In One Solutions Class 10 Science Chapter 10 Light Reflection And Refraction PDF provides comprehensive answers mapped to standard All In One Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Complete Your Class 10 Exam Preparation

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 10 Science?

They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 10 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 10 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 10 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 10 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.