Download Class 10 Chemistry Practice Worksheets
Access comprehensive chapter-wise worksheets for Chemistry Practical Viva Questions using the Chemistry Practical Viva Questions CBSE Class 10 Chemistry Worksheets Set 08. Designed to align with the 2026-27 academic syllabus for Class 10 Chemistry, these printable practice sets help students reinforce key concepts and improve their overall exam readiness.
Access Chemistry Practical Viva Questions Practice Papers and Solutions
Navigate directly to the solved Chemistry worksheets using the digital viewer below. Each practice set includes detailed step-by-step solutions, allowing students to instantly cross-check their work and identify areas requiring further revision.
Questions with Answers
Question 1. What do you observe when a little concentrated sulphuric acid is poured into water in a beaker, and how should dilution always be carried out?
Answer:
The beaker becomes very hot because dissolving the acid releases a large amount of heat. For this reason the acid must always be added to the water in small portions with stirring. If water is added to the acid, the heat boils the water at the surface and may spurt out the acid.
In simple words: Always add acid to water, never water to acid.
Teacher's Note:
1. Dilution of concentrated sulphuric acid is highly exothermic.
2. Use a thick-walled glass vessel.
Question 2. Describe how rhombic, monoclinic and plastic sulphur are prepared.
Answer:
Rhombic sulphur: dissolve powdered roll sulphur in carbon disulphide, filter and leave to evaporate in air (no flame, since carbon disulphide is inflammable); shining octahedral crystals remain.
Monoclinic sulphur: melt the sulphur gently, let it cool until a crust forms, pierce the crust and pour out the liquid; needle-shaped crystals are left.
Plastic sulphur: heat sulphur nearly to boiling and pour it in a thin stream into cold water; a brown elastic, amorphous mass is formed.
In simple words: Different ways of melting and cooling or dissolving sulphur give different allotropes.
Teacher's Note:
1. Allotropes are different forms of the same element.
2. Plastic sulphur slowly turns into the rhombic form.
Question 3. What is the volume ratio of hydrogen to oxygen during electrolysis of water? How can the gases be identified?
Answer:
The volume of hydrogen collected at the cathode is double that of oxygen collected at the anode, which shows that water has the volumetric composition H\( _2 \)O (2 volumes of hydrogen to 1 of oxygen). A few drops of acid are added to make the water conduct. Hydrogen burns with a pop, and oxygen rekindles a glowing splinter.
In simple words: Hydrogen : oxygen = 2 : 1 by volume.
Teacher's Note:
1. Pure water is a very poor conductor of electricity.
2. The experiment uses a voltameter with platinum electrodes.
Question 4. How can you show that the hardness caused by calcium bicarbonate is temporary and that caused by calcium chloride is permanent?
Answer:
Prepare two samples of soft water and dissolve calcium bicarbonate in one and calcium chloride in the other. Both need a lot of soap before a lather forms. After boiling and cooling, the first sample lathers easily with soap, because the bicarbonate has changed to insoluble calcium carbonate, but the second still needs a lot of soap, because calcium chloride is not changed by boiling. Adding sodium carbonate to the second sample then removes the hardness.
In simple words: Boiling removes bicarbonate hardness only.
Teacher's Note:
1. Ca(HCO\( _3 \))\( _2 \) \( \rightarrow \) CaCO\( _3 \) + H\( _2 \)O + CO\( _2 \).
2. CaCl\( _2 \) + Na\( _2 \)CO\( _3 \) \( \rightarrow \) CaCO\( _3 \) + 2NaCl.
Question 5. Define the equivalent weight of an element. State the equivalent weight of magnesium, and describe how it is found by the hydrogen displacement method.
Answer:
The equivalent weight of an element is the number of parts by weight of it that combine with or displace 1.008 parts of hydrogen, 8 parts of oxygen or 35.5 parts of chlorine.
About 0.2 to 0.3 g of magnesium is weighed and allowed to react with dilute hydrochloric acid. The hydrogen displaces an equal volume of water, which is measured after equalising the water levels.
The volume is corrected to S.T.P. after subtracting the aqueous vapour pressure at the room temperature. Since 1.008 g of hydrogen occupies 11 200 cm\( ^3 \) at S.T.P., the mass of magnesium that gives 11 200 cm\( ^3 \) is calculated.
The value comes out as 12, so the equivalent weight of magnesium is 12.
In simple words: Equivalent weight is the weight that displaces 1.008 g of hydrogen; magnesium: 12.
Teacher's Note:
1. Equivalent weight is a number and has no unit.
2. Zinc, iron and aluminium can be used in the same way.
Question 6. How is the equivalent weight of copper determined by the oxide method? What is its value?
Answer:
Weigh clean copper in an evaporating basin and dissolve it in concentrated nitric acid, adding the acid in drops (brown fumes of NO\( _2 \) are given off).
Heat gently until the blue nitrate has turned into black cupric oxide and no more brown fumes appear. Cool and weigh. Repeat heating until the mass is constant.
Mass of oxygen = mass of oxide \( - \) mass of copper. Equivalent weight of copper = (mass of copper / mass of oxygen) \( \times \) 8.
The value found is about 31.5.
In simple words: Find how much copper combines with 8 g of oxygen: about 31.5 g.
Teacher's Note:
1. Heating to constant mass shows that the reaction is complete.
2. Copper (atomic mass 63) has valency 2, so 63/2 = 31.5.
Question 7. What is the effect of heating on the carbonates of copper, magnesium, sodium and potassium?
Answer:
Carbonates of copper and magnesium decompose into the oxide and carbon dioxide (black CuO and white MgO), and the gas turns lime water milky. Sodium and potassium carbonates are stable and do not decompose in a Bunsen flame. Ammonium carbonate decomposes completely into ammonia, water and carbon dioxide.
In simple words: Most carbonates break up into oxide and CO\( _2 \), except those of sodium and potassium.
Teacher's Note:
1. CuCO\( _3 \) \( \rightarrow \) CuO + CO\( _2 \).
2. Carbonates of the more reactive metals are more stable.
Question 8. A solution of an unknown salt gives a white precipitate with dilute HCl which dissolves in hot water, and a yellow precipitate with potassium iodide that dissolves on heating and returns as golden spangles. Which metal ion is present?
Answer:
The metal ion is lead (Pb\( ^{2+} \)). Lead chloride is soluble in hot water, and the golden spangles of lead iodide on cooling are a characteristic test for lead.
In simple words: Lead.
Teacher's Note:
1. Silver chloride and mercurous chloride do not dissolve in hot water.
2. Lead iodide is bright yellow.
Question 9. Why are the metals in the iron group precipitated only after ammonium chloride is added to ammonium hydroxide?
Answer:
Ammonium hydroxide is a weak base. Added to a solution containing NH\( _4 \)Cl, its ionisation is suppressed by the common NH\( _4 \)\( ^+ \) ion, so the concentration of hydroxide ions is small. Only hydroxides of very low solubility, those of iron(III) and aluminium, precipitate, while those of magnesium and the zinc group stay in solution.
In simple words: NH\( _4 \)Cl keeps the hydroxide ion concentration low.
Teacher's Note:
1. This is the common-ion effect.
2. It prevents co-precipitation of other groups.
Question 10. How would you distinguish between chloride, bromide and iodide using silver nitrate solution?
Answer:
Silver nitrate gives a white precipitate with a chloride (soluble in dilute ammonia), a pale yellow precipitate with a bromide (only sparingly soluble in dilute ammonia, soluble in concentrated ammonia) and a deeper yellow precipitate with an iodide (insoluble in ammonia). All are insoluble in dilute nitric acid.
In simple words: White, pale yellow and yellow precipitates for Cl, Br and I.
Teacher's Note:
1. Solubility in ammonia decreases from AgCl to AgI.
2. Silver halides darken in light.
Question 11. What is the use of the brown ring test? Describe it briefly.
Answer:
The brown ring test identifies a nitrate. A freshly prepared solution of ferrous sulphate is added to the nitrate solution, and concentrated sulphuric acid is poured slowly along the wall of the tube so that it settles at the bottom without mixing. A brown ring appears at the junction of the two liquids. It is formed by the nitrogen monoxide produced combining with ferrous sulphate.
In simple words: A brown ring at the junction of the two layers shows a nitrate.
Teacher's Note:
1. Do not shake the tube.
2. Nitrites and bromides can interfere with the test.
Question 12. A white substance gives a colourless gas on warming with dilute hydrochloric acid. The gas turns acidified potassium dichromate paper green. Name the radical.
Answer:
The radical is sulphite (SO\( _3 \)\( ^{2-} \)). Dilute acid releases sulphur dioxide, which reduces orange dichromate to green chromium(III). A carbonate gives CO\( _2 \), which does not do this, and a sulphide gives H\( _2 \)S, which blackens lead acetate paper.
In simple words: Sulphite.
Teacher's Note:
1. Sulphur dioxide has the smell of burning sulphur.
2. It also decolourises acidified permanganate.
Free study material for Science
CBSE Class 10 Chemistry Worksheets for Chemistry Practical Viva Questions
Mastering Chemistry Practical Viva Questions with Printable Worksheets
Review targeted practice exercises for Class 10 Chemistry Chemistry Practical Viva Questions. Curated to match official CBSE guidelines, these printable problem sets support daily revision and improve overall test readiness.
Verified Solutions and NCERT Alignment
Built using official NCERT guidelines for Class 10 Chemistry, these practice sheets provide reliable academic support. Cross-reference your completed work with our detailed solutions to learn standard answer-writing formats for CBSE exams.
Additional Study Resources for Class 10 Chemistry
Consistent engagement with these exercises builds familiarity with recurring exam themes. If specific areas within Chemistry Practical Viva Questions cause trouble, utilize our dedicated NCERT solutions for Class 10 Chemistry to clear up doubts immediately.
FAQs
You can download the latest chapter-wise printable worksheets for Class 10 Chemistry Chemistry Practical Viva Questions for free from StudiesToday.com. These have been made as per the latest CBSE curriculum for this academic year.
Yes, Class 10 Chemistry worksheets for Chemistry Practical Viva Questions focus on activity-based learning and also competency-style questions. This helps students to apply theoretical knowledge to practical scenarios.
Yes, we have provided solved worksheets for Class 10 Chemistry Chemistry Practical Viva Questions to help students verify their answers instantly.
Yes, our Class 10 Chemistry test sheets are mobile-friendly PDFs and can be printed by teachers for classroom.
For Chemistry Practical Viva Questions, regular practice with our worksheets will improve question-handling speed and help students understand all technical terms and diagrams.