Chapter-wise Worksheets for Class 10 Chemistry: Chemical Industry
Access comprehensive chapter-wise worksheets for Chemical Industry using the Chemical Industry CBSE Class 10 Chemistry Worksheets Set 07. Designed to align with the 2026-27 academic syllabus for Class 10 Chemistry, these printable practice sets help students reinforce key concepts and improve their overall exam readiness.
Practice Class 10 Chemistry Worksheets: Chemical Industry
View or download the dedicated Chemical Industry CBSE Class 10 Chemistry Worksheets Set 07 resource below. Engaging with these practice papers under focused study conditions ensures continuous academic progress and mastery of the 2026-27 curriculum for Chemical Industry.
Questions with Answers
Question 1. Name the raw materials used in the manufacture of (i) Portland cement (ii) hard glass (iii) nylon (iv) safety matches (v) thiokol.
Answer:
(i) Limestone and clay (with a little gypsum).
(ii) Sand (silica), potassium carbonate (potash) and calcium carbonate (lime).
(iii) Hexamethylenediamine and adipic acid.
(iv) Antimony trisulphide, potassium chlorate and glue for the head; red phosphorus on the side of the box.
(v) Ethylene dichloride and sodium polysulphide.
In simple words: Each product has its own set of starting chemicals.
Teacher's Note:
1. Hard glass resists heat because it contains potash and lime instead of soda.
2. Safety matches have phosphorus only on the box.
Question 2. What is annealing of glass? Why is it necessary?
Answer:
Annealing is heating glass articles to a high temperature and then cooling them very slowly.
It removes internal strain. Quickly cooled glass is brittle because its outside hardens while the inside is still shrinking, which sets up stresses.
In simple words: Slow cooling makes glass tough instead of brittle.
Teacher's Note:
1. Annealing is done in a special oven called a lehr.
2. Toughened glass is made by the opposite idea, controlled rapid cooling.
Question 3. Give the average composition of cement.
Answer:
Calcium oxide (lime) 60–67%, silica (SiO₂) 17–25%, alumina (Al₂O₃) 3–8%, ferric oxide (Fe₂O₃) 0.5–6%, magnesium oxide 0.1–4%, sulphur trioxide 1–3%.
In simple words: Cement is mainly lime combined with silica and alumina.
Teacher's Note:
1. Remember lime is about two thirds of cement.
2. The range changes slightly with the type of cement.
Question 4. Glass is a supercooled liquid. What does this statement mean?
Answer:
Glass has no regular crystal structure; its particles are arranged randomly as in a liquid.
On cooling the molten mass, it hardens without crystallising, so it behaves like a solid but has no sharp melting point.
Hence it is regarded as a liquid cooled below its freezing point without crystallising.
In simple words: Glass looks solid but its structure is that of a liquid.
Teacher's Note:
1. Amorphous means without shape or crystal order.
2. It softens gradually when heated.
Question 5. Bring out the differences between thermoplastics and thermosetting plastics.
Answer:
Thermoplastics soften on heating and harden on cooling, and can be remoulded again and again (polythene, PVC).
Thermosetting plastics become hard and infusible once moulded and cannot be softened again by heating (bakelite, melamine).
Thermoplastics are mostly linear or slightly branched polymers; thermosetting plastics have a cross-linked network.
In simple words: One can be reshaped by heat, the other cannot.
Teacher's Note:
1. Cross-linking makes a plastic thermosetting.
2. Thermoplastics can be recycled.
Question 6. Why is soap unsuited for washing clothes with hard water?
Answer:
Hard water contains calcium and magnesium ions.
These react with soap to form an insoluble sticky scum of calcium or magnesium stearate and no lather forms until all these ions are used up.
So soap is wasted and the clothes are not cleaned properly. Detergents do not form scum because their calcium salts are soluble.
In simple words: Hard water makes soap form scum.
Teacher's Note:
1. 2C₁₇H₃₅COONa + Ca²⁺ → (C₁₇H₃₅COO)₂Ca + 2Na⁺.
2. Detergents work well in hard water.
Question 7. Fill in the blanks: (a) The setting of cement is mainly a ______ process. (b) Glass was discovered by the ______. (c) Heating glass to a high temperature and cooling it gradually is called ______. (d) Laminated glass has a layer of ______ between sheets of glass. (e) In vulcanisation, rubber is warmed with ______. (f) A plastic that once hardened cannot be softened again is ______. (g) Rayon is a ______ fibre. (h) A glyceryl ester of a fatty acid is called a ______. (i) Glass drawn into fine threads is called ______ glass. (j) The main ingredient causing ignition by friction in a strike-anywhere match is ______.
Answer:
(a) chemical (hydration)
(b) Phoenicians
(c) annealing
(d) plastic (polyvinyl butyral)
(e) sulphur
(f) thermosetting
(g) semi-synthetic (regenerated cellulose)
(h) fat or oil
(i) fibre (spun)
(j) phosphorus sesquisulphide, P₄S₃
In simple words: Short recall of facts about materials.
Teacher's Note:
1. Learn each key industry term with one example.
2. Vulcanisation makes rubber harder and more elastic.
Question 8. State true or false: (a) The raw materials of cement are limestone and clay. (b) Pyrex glass is potash-lead glass. (c) Crookes glass allows ultraviolet rays to pass. (d) The best-known semi-synthetic fibre is nylon. (e) Hydrolysis of an ester with alkali is called saponification. (f) Shaving soap contains mostly sodium and potassium stearates. (g) Natural rubber is a polymer of butadiene. (h) Glass is annealed to prevent internal strain. (i) Bakelite is a thermoplastic. (j) Clinker is obtained in both dry and wet processes of cement manufacture.
Answer:
(a) True.
(b) False: Pyrex is borosilicate glass.
(c) False: Crookes glass absorbs ultraviolet rays.
(d) False: nylon is fully synthetic; rayon is semi-synthetic.
(e) True.
(f) True.
(g) False: natural rubber is a polymer of isoprene.
(h) True.
(i) False: bakelite is thermosetting.
(j) True.
In simple words: Check each statement with the properties of the material.
Teacher's Note:
1. Pyrex is chosen for laboratory ware because it resists heat shock.
2. Keep in mind the difference between natural, semi-synthetic and synthetic fibres.
Free study material for Science
Chemical Industry Printable Worksheets and Exercises for Class 10 Chemistry
Download Chapter Worksheets: Class 10 Chemistry
Explore reliable practice questions for Chemical Industry tailored for Class 10 Chemistry learners. Use these structured worksheets to evaluate exam preparedness and strengthen problem-solving skills throughout the 2026 academic session.
Concept Clarification for Chemical Industry
Built using official NCERT guidelines for Class 10 Chemistry, these practice sheets provide reliable academic support. Cross-reference your completed work with our detailed solutions to learn standard answer-writing formats for CBSE exams.
Effective Revision Strategies for School Exams
Consistent engagement with these exercises builds familiarity with recurring exam themes. If specific areas within Chemical Industry cause trouble, utilize our dedicated NCERT solutions for Class 10 Chemistry to clear up doubts immediately.
FAQs
You can download the latest chapter-wise printable worksheets for Class 10 Chemistry Chemical Industry for free from StudiesToday.com. These have been made as per the latest CBSE curriculum for this academic year.
Yes, Class 10 Chemistry worksheets for Chemical Industry focus on activity-based learning and also competency-style questions. This helps students to apply theoretical knowledge to practical scenarios.
Yes, we have provided solved worksheets for Class 10 Chemistry Chemical Industry to help students verify their answers instantly.
Yes, our Class 10 Chemistry test sheets are mobile-friendly PDFs and can be printed by teachers for classroom.
For Chemical Industry, regular practice with our worksheets will improve question-handling speed and help students understand all technical terms and diagrams.