Xam Idea Solutions Class 10 Science Chapter 2 Acids Bases And Salts Short Answer Type Questions II

Solutions for Class 10 Science: Chapter 02 Acids Bases And Salts

Explore reliable textbook solutions for Chapter 02 Acids Bases And Salts tailored for Class 10 learners using methodologies. Utilizing these Science answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice Class 10 Science Solutions: Chapter 02 Acids Bases And Salts

View or download the dedicated Chapter 02 Acids Bases And Salts solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Science.

Short Answer Type Questions II

Question 1. When zinc metal treated with a dilute solution of a strong acid, a gas is evolved, which is utilised in the hydrogenation of oil. Name the gas evolved. Write the chemical equation of the reaction and also write a test to detect the gas formed.

Solution.

When zinc reacts with dilute solution of strong acid, it forms salt and hydrogen gas is evolved.

Zn + 2HCl → ZnCl2 + H2

When a burning splinter is brought near the mouth of the test tube, the gas burns with a pop sound.

Teacher's Note: Zinc with a dilute acid releases hydrogen, which burns with a pop sound near a flame.

Exam Note: Mention the pop test.

Question 2. Which acid is produced in our stomach? What happens if there is an excess of acid in the stomach? How can its effect be cured?

Solution.

hydrochloric acid is produced in our stomach. The excess acid in the stomach causes indigestion which produces pain and irritation. This effect can be cured by using antacids. Antacids (a group of mild bases) react with excess acid in the stomach and neutralise it.

Teacher's Note: Stomach acid is hydrochloric acid, and excess causes indigestion, relieved by mild bases called antacids.

Exam Note: Name the acid and the remedy.

Question 3. To the three solutions listed below, a few drops of phenolphthalein and blue litmus were added separately. Specify the colour change in each case, if any: Colour change with Colour change with blue Name of the solution phenolphthalein litmus (a) Sodium carbonate (b) Hydrochloric acid (c) Sodium chloride

Solution.

Colour change with Colour change with blue Name of the solution phenolphthalein litmus

(a) Sodium carbonate Turns pink No change

(b) Hydrochloric acid No change Turns red

(c) Sodium chloride No change No change

Teacher's Note: Indicator colours show whether solutions are acidic, basic or neutral, as the table shows.

Exam Note: Fill each cell by indicator behaviour.

Question 4. A salt X when dissolves in distilled water gives a clear solution which turns red litmus blue. Explain this phenomenon.

Solution.

Basic solution turn red litmus paper blue. The salt of a weak acid and a strong base gives a basic solution. So, the gives salt X is the salt of a weak acid and a strong base.

Example: When sodium carbonate is dissolved in water, it gets hydrolysed to some extent and forms sodium hydroxide and carbonic acid.

𝐻𝑦𝑑𝑟𝑜𝑙𝑦𝑠𝑖𝑠 𝑁𝑎2𝐶𝑂3(𝑠) + 2𝐻2𝑂(𝑙) ⇄ 2𝑁𝑎𝑂𝐻(𝑎𝑞) + 𝐻2𝐶𝑂3(𝑎𝑞) 𝑆𝑜𝑑𝑖𝑢𝑚 𝑐𝑎𝑟𝑏𝑜𝑛𝑎𝑡𝑒 (𝐵𝑎𝑠𝑖𝑐 𝑠𝑎𝑙𝑡 𝑊𝑎𝑡𝑒𝑟 𝑆𝑜𝑑𝑖𝑢𝑚 ℎ𝑦𝑑𝑟𝑜𝑥𝑖𝑑𝑒 (𝑆𝑡𝑟𝑜𝑛𝑔 𝑏𝑎𝑠𝑒) 𝐶𝑎𝑟𝑏𝑜𝑛𝑖𝑐 𝑎𝑐𝑖𝑑 (𝑊𝑒𝑎𝑘 𝑎𝑐𝑖𝑑)

Being a strong base, sodium hydroxide is fully ionised and gives a large amount of hydroxide ions (OH-). Carbonic acid is a weak acid which is only slightly ionised and hence, gives a small amount of hydrogen ions (H+). The H+ ions produced by carbonic acid neutralises only a small amount of OH- ions produced by sodium hydroxide and the rest amount of OH- ions are present in the solution. Hence, the Na2CO3 solution is basic in nature. It turns red litmus blue.

Teacher's Note: A salt solution turning red litmus blue is basic, so the salt comes from a weak acid and strong base.

Exam Note: Name an example salt.

Question 5. With the help of a chemical equation, explain how a soda-acid fire extinguisher helps in putting out a fire.

Solution.

Soda-acid fire extinguisher contains sodium bicarbonate and sulphuric acid, which are in separate containers in them. When knob of the fire extinguisher is pressed, then sulphuric acid mixes with sodium bicarbonate solution and produces a lot of CO2 gas, which forms a blanket over the fire and cuts it off from the supply of the air to the burning substance and the fire stops.

2𝑁𝑎𝐻𝐶𝑂3 + 𝐻2𝑆𝑂4 → 𝑁𝑎2𝑆𝑂4 + 2𝐻2𝑂 + 2𝐶𝑂2 𝑆𝑢𝑙𝑝ℎ𝑢𝑟𝑖𝑐 𝑎𝑐𝑖𝑑 𝑆𝑜𝑑𝑖𝑢𝑚 𝑠𝑢𝑙𝑝ℎ𝑎𝑡𝑒 𝑊𝑎𝑡𝑒𝑟 𝐶𝑎𝑟𝑏𝑜𝑛 𝑑𝑖𝑜𝑥𝑖𝑑𝑒 𝑆𝑜𝑑𝑖𝑢𝑚 ℎ𝑦𝑑𝑟𝑜𝑔𝑒𝑛𝑐𝑎𝑟𝑏𝑜𝑛𝑎𝑡𝑒

Teacher's Note: In a soda-acid extinguisher, acid mixes with bicarbonate to make carbon dioxide that smothers the fire.

Exam Note: Give the reaction and its action.

Question 6. A compound which is prepared from gypsum has the property of hardening when mixed with a proper quantity of water. Identify the compound. Write the chemical equation for its preparation. For what purpose is it used in hospitals?

Solution.

The compound prepared from gypsum on heating it at 100°C, is known as Plaster of Paris. Its chemical formula is

CaSO4. ½ H2O.

Hence, its chemical name is calcium sulphate hemihydrate. The chemical equation for its preparation is as follows: 100𝑜𝑐 𝐶𝑎𝑆𝑂4. 𝐻2𝑂 𝐶𝑎𝑆𝑂4. 2𝐻2𝑂 → 2 𝐻2𝑂 + 1 𝐺𝑦𝑝𝑠𝑢𝑚 𝑃𝑙𝑎𝑠𝑡𝑒𝑟 𝑜𝑓 𝑝𝑎𝑟𝑖𝑠 𝑊𝑎𝑡𝑒𝑟

Plaster of Paris is used in hospitals mainly as plaster for supporting fractured bones in the right position. In dentistry, it is used for making casts.

Teacher's Note: The material from gypsum is a half-water hydrate that sets on mixing with water.

Exam Note: Mention its use in hospitals.

Question 7. What is meant by water of crystallisation? Explain that the crystallisation salts contain water of crystallisation.

Solution.

Water of crystallisation is a fixed number of water molecular present in one formulas unit of a salt. One formula unit of copper sulphate contains five water molecules (5H2O). The water molecules which form part of the structure of a crystal are called water of crystallisation. When hydrated salts are heated strongly, they lose their water of crystallisation.

On strong heating, blue copper sulphate turn white (due to the loss of water of crystallisation).

ℎ𝑒𝑎𝑡 𝐶𝑢𝑆𝑂4. 5𝐻2𝑂 → 𝐶𝑢𝑆𝑂4 + 5𝐻2𝑂 𝑊𝑎𝑡𝑒𝑟 𝐻𝑦𝑑𝑟𝑎𝑡𝑒𝑑 𝐴𝑛ℎ𝑦𝑑𝑟𝑜𝑢𝑠 (𝐺𝑜𝑒𝑠 𝑎𝑤𝑎𝑦) 𝑐𝑜𝑝𝑝𝑒𝑟 𝑠𝑢𝑙𝑝ℎ𝑎𝑡𝑒 𝑐𝑜𝑝𝑝𝑒𝑟 𝑠𝑢𝑙𝑝ℎ𝑎𝑡𝑒 (𝐵𝑙𝑢𝑒) (𝑊ℎ𝑖𝑡𝑒)

Anhydrous copper sulphate turns blue on adding water.

𝐶𝑢𝑆𝑂4 5𝐻2𝑂 → 𝐶𝑢𝑆𝑂4. 5𝐻2𝑂 𝐴𝑛ℎ𝑦𝑑𝑟𝑜𝑢𝑠 𝑊𝑎𝑡𝑒𝑟 𝐻𝑦𝑑𝑟𝑎𝑡𝑒𝑑 𝑐𝑜𝑝𝑝𝑒𝑟 𝑠𝑢𝑙𝑝ℎ𝑎𝑡𝑒 (𝐵𝑙𝑢𝑒) 𝑐𝑜𝑝𝑝𝑒𝑟 𝑠𝑢𝑙𝑝ℎ𝑎𝑡𝑒 + (𝑊ℎ𝑖𝑡𝑒)

Teacher's Note: Water of crystallisation is fixed water in a salt's formula unit, as in hydrated copper sulphate.

Exam Note: Define it with one example.

Question 8. (i) Write the formula and chemical name of bleaching powder. (ii) Write chemical equation to represent the action of atmospheric CO2 gas on bleaching powder when left exposed in open. (iii) State for what purpose is bleaching powder used in water treatment plants.

Solution.

(i) Chemical formula: CaOCl2 Chemical name: Calcium oxychloride

(ii) 𝐶𝑎𝑂𝐶𝑙2(𝑠) + 𝐶𝑂2(𝑔) → 𝐶𝑎𝐶𝑂3(𝑠) + 𝐶𝑙2(𝑔) 𝐵𝑙𝑒𝑎𝑐ℎ𝑖𝑛𝑔 𝑝𝑜𝑤𝑑𝑒𝑟 𝐶𝑎𝑟𝑏𝑜𝑛 𝑑𝑖𝑜𝑥𝑖𝑑𝑒 𝐶𝑎𝑐𝑖𝑢𝑚 𝑐𝑎𝑟𝑏𝑜𝑛𝑎𝑡𝑒 𝐶ℎ𝑙𝑜𝑟𝑖𝑛𝑒

(iii)Bleaching powder is used in water treatment plants for disinfecting drinking water to make it free of germs.

Teacher's Note: Bleaching powder is calcium oxychloride, used for water disinfection, and it releases chlorine with acids or carbon dioxide.

Exam Note: Give the formula and one use.

Question 9. How would you distinguish between baking powder and washing soda by heating?

Solution.

The chemical formula of backing powder is sodium hydrogencarbonate (NaHCO3); whereas, that of washing soda is sodium carbonate (Na2CO3.10H2O). Sodium hydrogencarbonate on heating gives CO2gas which will turn lime water milky whereas no such gas is obtained from sodium carbonate.

𝐻𝑒𝑎𝑡 𝑁𝑎2𝐶𝑂3 + 𝐻2𝑂 + 𝐶𝑂2 2𝑁𝑎𝐻𝐶𝑂3 →

𝐻𝑒𝑎𝑡 𝑁𝑎2𝐶𝑂3 + 10𝐻2𝑂 𝑁𝑎2𝐶𝑂3. 10𝐻2𝑂 →

Teacher's Note: Heating baking soda releases gas that turns lime water milky, whereas washing soda shows no such effect.

Exam Note: State the lime water test.

Question 10. Salt A commonly used in bakery products on heating gets converted into another salt B which itself is used for removal of hardness of water and a gas C is evolved. The gas C when passed through lime water, turns it milky. Identify A, B and C.

Solution.

Baking powder (NaHCO3), salt A is commonly used in bakery products. On heating, it forms sodium carbonate (Na2CO3), B and CO2 gas, C is evolved. When CO2 gas is passed through lime water it forms calcium carbonate (CaCO3), which is slightly soluble in water making it milky. A – NaHCO3; B – Na2CO3; C – CO2 gas

Teacher's Note: The salt used in baking turns on heating into washing soda's base compound with carbon dioxide released.

Exam Note: Identify the salts and the gas.

Question 11. What are strong and weak acids? In the following list of acids, separate strong acids weak acids: Hydrochloric acid, citric acid, acetic acid, nitric acid, formic acid, sulphuric acid.

Solution.

In aqueous solutions, strong acids ionise completely and provide hydronium ions. On the other hand, weak acids are partially ionised and an aqueous solution of same molar concentration provides a much smaller concentration of H3O+ ions. Strong acids−Hydrochloric acid, sulphuric acid, nitric acid. Weak acids−Citric acid, acetic acid, formic acid.

Teacher's Note: Strong acids ionise completely and weak acids only partly, so each listed acid can be sorted.

Exam Note: Classify hydrochloric acid as strong.

Question 12. What happens when dilute hydrochloric acid is added to the following and write balanced chemical equations (i) Bleaching powder (ii) Zinc granules (iii) Baking soda

Solution.

(i) Calcium chloride and chlorine gas are formed. + 𝐻2𝑂(𝑙) + 𝐶𝑙(𝑔) 𝐶𝑎𝑂𝐶𝑙2(𝑠) + 2𝐻𝐶𝑙(𝑎𝑞) → 𝐶𝑎𝐶𝑙2(𝑠) 𝐵𝑙𝑒𝑎𝑐ℎ𝑖𝑛𝑔 𝑝𝑜𝑤𝑑𝑒𝑟 𝐶𝑎𝑙𝑐𝑖𝑢𝑚 𝑐ℎ𝑙𝑜𝑟𝑖𝑑𝑒

(ii) Hydrogen gas is evolved.

+ 𝐻2(𝑔) 𝑍𝑛(𝑠) + 2𝐻𝐶𝑙(𝑎𝑞) → 𝑍𝑛𝐶𝑙2(𝑎𝑞) 𝑍𝑖𝑛𝑐 𝑍𝑖𝑛𝑐 𝑔𝑟𝑎𝑛𝑢𝑙𝑒𝑠 𝑐ℎ𝑙𝑜𝑟𝑖𝑑𝑒

(iii) Sodium chloride and carbon dioxide gas are formed.

𝑁𝑎𝐻𝐶𝑂3(𝑠) + 𝐻𝐶𝑙(𝑎𝑞) → 𝑁𝑎𝐶𝑙(𝑎𝑞) + 𝐻2𝑂(𝑙) + 𝐶𝑂2(𝑔) 𝐶𝑎𝑟𝑏𝑜𝑛 𝑆𝑜𝑑𝑖𝑢𝑚 𝐵𝑎𝑘𝑖𝑛𝑔 𝑠𝑜𝑑𝑎 𝑑𝑖𝑜𝑥𝑖𝑑𝑒 𝑐ℎ𝑙𝑜𝑟𝑖𝑑𝑒

Teacher's Note: Each reaction of the acid gives specific products, such as a salt with a gas or water.

Exam Note: Write the products for each case.

Question 13. Give suitable reason for the following statements: (i) We feel burning sensation in the stomach when we overeat. (ii) The crystals of washing soda change to white powder on exposure to air. (ii) An aqueous solution of sodium chloride is neutral but an aqueous solution of sodium carbonate is basic.

Solution.

(i) when we overeat excess of acid is produced in the stomach which causes burning sensation.

(ii) Washing soda is sodium carbonate decahydrate which when exposed to air loses its water of crystallisation and changes to white powder.

(iii) Sodium chloride is a salt of strong acid HCl and strong base NaOH, so it is neutral. Sodium carbonate is a salt of weak acid H2CO3, and strong base NaOH, so it is basic.

Teacher's Note: Reasons include excess stomach acid, loss of crystal water from washing soda, and salt hydrolysis.

Exam Note: Give one reason for each part.

Xam Idea Solutions for Class 10 Mathematics: Xam Idea Solutions Class 10 Science Chapter 2 Acids Bases And Salts Short Answer Type Questions II

Download Xam Idea Solutions for Class 10

Explore reliable mathematical solutions for Xam Idea Solutions Class 10 Science Chapter 2 Acids Bases And Salts Short Answer Type Questions II tailored for Class 10 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for Class 10 Math

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these [current-page:node:field_author] Solutions for Class 10 Science?

They are chapter-wise solved questions from the book for Class 10 Science. Each answer is explained step by step so you can check your work and revise.

Are the [current-page:node:field_author] Class 10 Science Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these [current-page:node:field_author] solutions for Class 10 Science?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising [current-page:node:field_author] Class 10 Science questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 10 Science Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.